Related
A friend of me tryed to play with his I9300, now he got a I9300 that only boots in the "Android system recovery 3e", he know i got a i9000 and ask me to fix it
If i ask what he has done, he simply doenst know ( yea i know , compleet re****) (no backup made)
Now i am trying to fix it.
symptom and what i tryed
- It does only boot in "Android system recovery 3e", I dont get in the "Download mode", volume down+home+on doesnt work, it just boots in "Android system recovery 3e"
- I tryed using ADB tools to boot it to "download mode" (from the "Android system recovery 3e") But it only reboots in "Android system recovery 3e" again.
- I tryed NVflash, but this doesnt recognize the phone when its in "Android system recovery 3e"
(if i only get it in "download mode"it was easy, but i cant )
Ok I was stuck in "Android system recovery 3e"
What are mij options in "Android system recovery 3e"?
reboot system now
apply update from ABD
apply update from external storage
wipe data/factory reset
wipe cache partition
aaply update from cache
(under it it says in Yellow)
# Manual mode #
-- Appling Multi-CSC....
Appliad the CSC-code : PHN
Successfully applied multi-CSC
I tryde
- i placed a costum mode rom(WanamLite V5.9) (*.zip) on the mirco SD-card and tryed to use the "apply update from external storage"...
Get message:
---Intall /sdcard....... (this takes 3 min)
Then i am back in the "Android system recovery 3e" menu , i pick "reboot system now" and it reboots in "Android system recovery 3e"
It seem to me that the bootloader isnt there any more (only 3e recovery)
How can i get the phone to work from the 3e recovery menu?
I am stuck
Thanks in advance!
flash a custom recovery
DSA said:
flash a custom recovery
Click to expand...
Click to collapse
he can't get into download
DSA said:
flash a custom recovery
Click to expand...
Click to collapse
Yea but how?
Cant get in "download mode" to use odin to flash CloclworkMod
Cant install TWRP 2.4.3.0 because i cant isnt apk's because cant start Android
@ "Android system recovery 3e" Apply update from external storage, I tryed to install custom recovery that comes with ADB tool kit, but the "Android system recovery 3e" doesnt except tar files, i renamed them to md5 or zip, but i get a verification error.
I also tryed to use
ADB sideload <filename stock rom>
But here i get a verification error es well
Glebun said:
he can't get into download
Click to expand...
Click to collapse
missed that
never mind...
3e would require a update zip from memory .
If you boot to recovery it will say update from xxx
I don't actually know what the update consists of on SGS3 tar zip or what format .
jje
Every thing i try to flash i get a verfication fail, dont know what to do any more.
- Right side of the picture is the state that the fone boots in, no matter what i try
- Left side of the picture is the verfication fail, when i try to aply a recovery,img,update,zip or img (or what ever i try)
doesnt matter if i put it on the extranal media or from ADB,
I am realy stuck
gnusmass said:
Every thing i try to flash i get a verfication fail, dont know what to do any more.
- Right side of the picture is the state that the fone boots in, no matter what i try
- Left side of the picture is the verfication fail, when i try to aply a recovery,img,update,zip or img (or what ever i try)
doesnt matter if i put it on the extranal media or from ADB,
I am realy stuck
Click to expand...
Click to collapse
Service centre the next step .
jje
try pulling the battery out then put it back in. push both volume keys at the same time and plug in the usb cable. it took me a couple of attempts but it worked. if u still cant connect with odin, then just push both volume keys and press the power button. at the next screen push up volume then connect to usb. have odin already open and ready to start. if u need the stock firmware then follow this youtube video @
youtube.com/watch?v=aNb4CKSy5U8.
But you will have to download the firmware from sammobile site itself rather than using check fus downloader as it doesnt work.
oh cmon, no need to revive a 2 month old thread
Glebun said:
oh cmon, no need to revive a 2 month old thread
Click to expand...
Click to collapse
And why not? I came across the same problem and i came acrosss this thread that had no closure
Glebun said:
oh cmon, no need to revive a 2 month old thread
Click to expand...
Click to collapse
So what was the fix for this as i have the same issue and im stuck - there must be a .ZIP file that the standard recovery mode will see and install without the failed because of the signture problem......someone please help!!!!!!!!
gts 5830i
i rooted gts 5830i and i installed custom rom mnd 2.4 sgs3.... but after intalling rom my boot logo is freeze. i put out battery and reinstall and on but same is.... so i m want to flash custom rom but my mobile not going to recovery mode ... only show freeze logo samsung gts 5830i......... what happend to it ... i m trouble,,,, please help...
i m using cwm mode for installig rom.....
saiemmalik said:
i rooted gts 5830i and i installed custom rom mnd 2.4 sgs3.... but after intalling rom my boot logo is freeze. i put out battery and reinstall and on but same is.... so i m want to flash custom rom but my mobile not going to recovery mode ... only show freeze logo samsung gts 5830i......... what happend to it ... i m trouble,,,, please help...
i m using cwm mode for installig rom.....
Click to expand...
Click to collapse
You are in the wrong forum this is I9300/05 .
Hi,
Hope someone can help. I've tried to install a custom ROM today and I'm afraid I managed to brick my phone (Xperia P). Here is what i did:
I started out according to the Starters guide:
-Rooted phone
-Installed CWM
-Made a backup
-Unlocked Bootloader
-Installed JB Moonbreaker 3.5: at this point I was actually still following the starters guide, as in: wiping cache, wiping data,wiping dalvik cache and then installing from zip.
-The phone is currently stuck on the loading screen that comes after "Sony" and "Xperia" (the colorful swirling thingie)
-I can only shut it down by pressing and holding the power and volume up keys until it vibrates 3 times in a row.
-Starting with pressing volume down key repeatedly will not bring up CWM (also gets stuck on the same screen).
-Will also not fastboot anymore properly. (waiting for device for "fastboot.exe -i 0x0fce getvar version"; LED on device will not even light up as blue, goes to green instantly)
-In Device Manager I can see it as "Android" with a yellow exclamation mark.
-Sony PC Companion gives me the "My Sony Xperia P LT22 is connected" popup every 15 seconds but will actually not show the device as connected
I'm wondering if I can flash a stock rom on it to recover it or if there is anything else that can be done.
Thanks in advance
huvikman said:
Hi,
Hope someone can help. I've tried to install a custom ROM today and I'm afraid I managed to brick my phone (Xperia P). Here is what i did:
I started out according to the Starters guide:
-Rooted phone
-Installed CWM
-Made a backup
-Unlocked Bootloader
-Installed JB Moonbreaker 3.5: at this point I was actually still following the starters guide, as in: wiping cache, wiping data,wiping dalvik cache and then installing from zip.
-The phone is currently stuck on the loading screen that comes after "Sony" and "Xperia" (the colorful swirling thingie)
-I can only shut it down by pressing and holding the power and volume up keys until it vibrates 3 times in a row.
-Starting with pressing volume down key repeatedly will not bring up CWM (also gets stuck on the same screen).
-Will also not fastboot anymore properly. (waiting for device for "fastboot.exe -i 0x0fce getvar version"; LED on device will not even light up as blue, goes to green instantly)
-In Device Manager I can see it as "Android" with a yellow exclamation mark.
-Sony PC Companion gives me the "My Sony Xperia P LT22 is connected" popup every 15 seconds but will actually not show the device as connected
I'm wondering if I can flash a stock rom on it to recover it or if there is anything else that can be done.
Thanks in advance
Click to expand...
Click to collapse
Keep the stock fw ready to be flashed using flashtool, enter into flashmode and flash it !
Sent from my Xperia U using xda app-developers app
Can't seem to get it flashed from flashtool. I'm pressing the back button and connecting the USB and I'M just getting the same stuff on the phone, while flashtool is waiting for the phone.
I did manage to enter fastboot again though. Should I be flashing CWM from here (since I can't enter it). Or kernel then rom? I'm a bit lost.
huvikman said:
Can't seem to get it flashed from flashtool. I'm pressing the back button and connecting the USB and I'M just getting the same stuff on the phone, while flashtool is waiting for the phone.
I did manage to enter fastboot again though. Should I be flashing CWM from here (since I can't enter it). Or kernel then rom? I'm a bit lost.
Click to expand...
Click to collapse
Its volume down key and Plug in USB, to enter flashmode
Not back button.
Or flash a kernel by fastboot mode, enter CWM and install the ROM (assuming you have the zip file in the SD card )
Sent from my Xperia U using xda app-developers app
No luck. I get a green LED and nothing happens. If I hold down volume down for really-really long then I'm back to the same boot animation.
huvikman said:
No luck. I get a green LED and nothing happens. If I hold down volume down for really-really long then I'm back to the same boot animation.
Click to expand...
Click to collapse
yes green LED it is,
i hope you had the flashing process ready at the PC right ?
First make sure your phone is shut down. long press power+vol up until you feel 3 vibrations.
From there you can try fastboot mode or flash mode.
Utensils vioment
Alright done all that, still is the same. I've started to play with other USB ports and I noticed that when I get connected it tries installing the SEMC Flash device driver. It fails with "device unplugged" message exactly at the same time when when the Sony logo appears. Then it tries installing MTU USB Device as well. Reinstalled flashtool drivers and tried in different ports. It seems as if the phone is not staying in flashmode?
huvikman said:
Alright done all that, still is the same. I've started to play with other USB ports and I noticed that when I get connected it tries installing the SEMC Flash device driver. It fails with "device unplugged" message exactly at the same time when when the Sony logo appears. Then it tries installing MTU USB Device as well. Reinstalled flashtool drivers and tried in different ports. It seems as if the phone is not staying in flashmode?
Click to expand...
Click to collapse
I recall I had that issue with wundows 7 at the beginning, what I did then was to boot my windows xp and managed to flash from there.
I have tried many things since, and if I am not mistaken it's installing flahtool drivers that fixed it finally.
I think there are 3 drivers there you need to install.
nifileb Naval
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
did you tried to flash the rom over ICS, if yes then thats why your p got stuck at boot, coz i too got the same prob, when i tried to flash the JB moonbreaker over ICS, so what i did was pressed the power button and volume up button till 3 vibration, start flashtool and flash stock ICS firmware, but don't uncheck wipe data, otherwise you will get bootloop, after flashing is complete, now download and flash stock JB firmware, root your phone using doomlord's easy root kit or any other way you know, install cwm and now reboot into cwm flash JB stock or custom kernel and then the rom, thats it, just let me know if the prob is solved, thanks
garvitdelhi said:
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
Click to expand...
Click to collapse
Managed to get the phone back to working with this, thanks! Now just a couple of questions left . Do I have to reroot and reinstall CWM after this? I guess BL is still unlocked right?
maknom66 said:
did you tried to flash the rom over ICS, if yes then thats why your p got stuck at boot, coz i too got the same prob, when i tried to flash the JB moonbreaker over ICS, so what i did was pressed the power button and volume up button till 3 vibration, start flashtool and flash stock ICS firmware, but don't uncheck wipe data, otherwise you will get bootloop, after flashing is complete, now download and flash stock JB firmware, root your phone using doomlord's easy root kit or any other way you know, install cwm and now reboot into cwm flash JB stock or custom kernel and then the rom, thats it, just let me know if the prob is solved, thanks
Click to expand...
Click to collapse
It was on JB stock. I'll check if I cano boot to CWM now or have to redo all that stuff and then try flashing Phantom Kernel and then Moonbreak. Will let you know
xperia p
huvikman said:
Managed to get the phone back to working with this, thanks! Now just a couple of questions left . Do I have to reroot and reinstall CWM after this? I guess BL is still unlocked right?
Click to expand...
Click to collapse
yup bl will always be unlocked regfardless of what rom you flash unless you relock it
yup if you have to install cwm again then if you want it and you have to first root it again as well
------------------------------------------------------------
Xperia P PAC rom jb 4.2.2 user
hit thanks if i helped
Thanks everyone for the input, issue resolved, kernel and rom flash was successful.
Stuck on boot
Guys I have the same problem.
I wasn't satisfied with the rom I put on my phone so I went on to put another one on it.
Flashed the kernel with fastboot, went into cwm, deleted system, cache etc. and went on to flash the rom, but there was no rom zip there, and I was sure I had put it. It was probably an error during the copy procces and it just stopped, I assumed it copied.
Well, now it is just stuck on the boot screen. I can get into fastboot and cwm, but I have nothing to flash.
I tried using the Sony recovery "Emma" but it just stays blank when I connect the phone..
Is there something else I can do?
rocker55555 said:
Guys I have the same problem.
I wasn't satisfied with the rom I put on my phone so I went on to put another one on it.
Flashed the kernel with fastboot, went into cwm, deleted system, cache etc. and went on to flash the rom, but there was no rom zip there, and I was sure I had put it. It was probably an error during the copy procces and it just stopped, I assumed it copied.
Well, now it is just stuck on the boot screen. I can get into fastboot and cwm, but I have nothing to flash.
I tried using the Sony recovery "Emma" but it just stays blank when I connect the phone..
Is there something else I can do?
Click to expand...
Click to collapse
The rom probably won't work if you delete /system so reflash stock JB first maybe this will help: http://forum.xda-developers.com/showthread.php?t=1849170
Facing exact same issue i think
garvitdelhi said:
you can use emma flash tool by sony to flash your device once u get into flashboot mode(vol down den insert usb cable)
you will find it at sony developer site
Click to expand...
Click to collapse
Hi
I think im facing a very similar issue, i m very new to this and therefore didnt understand the solution. I did visit the developer site for emma, but can you tell me the exact thing to do after starting Emma. I mean, when do i connect the phone and how, what commands to give. Below is explanation of how i got into this and what all ive tried.
OK i ve been trying to flash a new custom rom on my Xperia P, i looked at a number of guidelines and doing things step by step.
Since im very new to this i downloaded a few Roms. I was following the guide "http://droidors.com/2014/07/08/update-xperia-p-lt22i-to-android-4-4-4-kitkat-with-slimkat-custom-rom/2/" and everything was going fine. I reached the step to "fastboot flash boot boot.img", i did that and then went on the next step to boot in CWM Recovery and install the zip rom and the Gapps. During the Zip Rom install i got status 7 error.
Now, i noticed that i might have flashed the wrong Rom so rechecked the guide and installed the correct Rom which is mentioned in "http://forum.xda-developers.com/xperia-u/p-development/rom-slimkat-4-4-2-release-candidate-t2657795" . But now THE PROBLEM IS, AFTER I FLASHED THE INCORRECT IMG, MY PC IS NOT RECOGNISING THE XPERIA P SAYING IT DOESNOT RECOGNISE THE DRIVERS, therefore im not able to copy the ROM Zip on the SDcard, to then run it from CWM.
After sometime i tried the below
Ok, now i tried to flash the stock Rom through this link "http://forum.xda-developers.com/xperia-u/p-development/ftf-firmware-xperia-p-generic-world-t2322163", through flashtool to bring my phone back to life. I installed the drivers as per instructions from drivers folder, but for some reason the pc is just not accepting. I did install through this exact method yesterday night and it worked perfectly.
Please suggest. I hope im asking at the right place.
Urgent help please
I forgot to mention, after I flashed the SlimKat Rom, and things went out of hand ( till this point i could see Slimkat logo at boot and could also go in CWM Recovery ), I tried to restore through Nandroid Backup i had done. As soon i selected the restore option and then the backup file, within 2-3 seconds the phone went off, and then on boot all i can do is see "SONY" on screen. Nothing else happens.
I ve tried all this on a different machine, with different wires and different USB port, no luck
Kindly advise, im stuck with no spare phone.
Solved i guess
OK Brother,
I downloaded EMMA and am currently downloading the service. It is very self explanatory. What was amazing is when i recognised my phone "What a sight "
Flashtools wasnt able to do that, so i guess the manufacture tools are damn important ( i wasnt exactly of the opinion before )
Also it is downloading Android 4.0.4 Build 6.1.1.b.1.54, which first came on the device, which also makes me think may be i should have tried that rather than trying to flash with the JB Rom all this while.
Man, i was scared. Thanks for this thread Bro.
God Bless
Will inform once the phone is booted up to confirm it worked.
Emma Worked
OK guys, I can confirm its EMMA "Flash tool for Xperia" fixed the problem for me. It installed 4.0.4 on it.
Also there is a pdf in the Download which guides about the usage.
Sigh
Correction- it installed the latest stock ROM jb
hello everyone
my phone is xperia sola
ics
unlocked bootloader
cwn recovery installed
rooted
ultimate sola v.2 rom
i have installed an app ( beats audio somthing )
after i run the app , my phone restarted , that was 2 days aga
and from that moment it's restarting
forever restarting :crying:
i can't even unlock teh lock screen fast enough , it restart again
p.s : sorry for my bad english i hope you understand my problem
Can you enter CWM?
If not, shut it off first, press power + volume down untill you feel 3 vibrations.
Enter CWM and format dalvik cache and cache, this won't lose any data, and try to boot again.
Does you CWM support adb?
ChikeD said:
Can you enter CWM?
If not, shut it off first, press power + volume down untill you feel 3 vibrations.
Enter CWM and format dalvik cache and cache, this won't lose any data, and try to boot again.
Does you CWM support adb?
Click to expand...
Click to collapse
tried that , it vibrate 3 times and doesn't enter cwm
it just boot and when the lock screen appear at the left corner it says "safemode " and then start restarting again
could cwn be deleted on it's own ?
before this problem , i've done alot of format factory from setting
D.m_2102 said:
tried that , it vibrate 3 times and doesn't enter cwm
it just boot and when the lock screen appear at the left corner it says "safemode " and then start restarting again
could cwn be deleted on it's own ?
before this problem , i've done alot of format factory from setting
Click to expand...
Click to collapse
CWM is copied to /system partition or is in custom kernel if that's what you had, it's lost once you flash new firmware, otherwise it should not be lost.
Istead powering up try to connect to the charger after you shut it off and try enter CWM then when you see the SONY logo.
ChikeD said:
CWM is copied to /system partition or is in custom kernel if that's what you had, it's lost once you flash new firmware, otherwise it should not be lost.
Istead powering up try to connect to the charger after you shut it off and try enter CWM then when you see the SONY logo.
Click to expand...
Click to collapse
it didn't enter cwm
D.m_2102 said:
it didn't enter cwm
Click to expand...
Click to collapse
How was it in safe mode, were you able to go past lock screen or backup with PCC?
Can you ebter fastboot mode or flash mode? If you can flash custom kernel that has CWM and flash stock after if you want stock.
Or you can flash firmware again if you don't mind losing data.
The phone was working fine until the battery was empty. I tried to charge it and turn it on, but it's stuck at the Samsung logo splash screen. Holding the power button only restarts the device, so to turn it off I'll have to take the battery out. I don't know how to fix this, and if a factory reset is the only option, I need to backup my data first which I currently don't know how to either (without accessing the OS).
I've got to the Android System Recovery 3e menu and tried clearing cache, which did not help. The option to do a factory reset is also there, but I need to backup my data first, and I don't even know if this will fix the problem.
I'm also able to enter download mode.
When connected to my PC it detects an unknown device named 'samsung_android", and it shows up in adb. I've tried doing a backup through adb, but it wanted me to unlock the screen to accept the backup, which I could not, because I'm stuck at the splash screen.
Is there anything I can do to save my data? Anything through adb? Install root (never done this before)?
dinho10r said:
The phone was working fine until the battery was empty. I tried to charge it and turn it on, but it's stuck at the Samsung logo splash screen. Holding the power button only restarts the device, so to turn it off I'll have to take the battery out. I don't know how to fix this, and if a factory reset is the only option, I need to backup my data first which I currently don't know how to either (without accessing the OS).
I've got to the Android System Recovery 3e menu and tried clearing cache, which did not help. The option to do a factory reset is also there, but I need to backup my data first, and I don't even know if this will fix the problem.
I'm also able to enter download mode.
When connected to my PC it detects an unknown device named 'samsung_android", and it shows up in adb. I've tried doing a backup through adb, but it wanted me to unlock the screen to accept the backup, which I could not, because I'm stuck at the splash screen.
Is there anything I can do to save my data? Anything through adb? Install root (never done this before)?
Click to expand...
Click to collapse
Hey mate, can you get into the recovery mode? Try flashing the TWRP recovery and boot by pressing power button + home button + volume up and find an option to mount your USB storage via USB cable and see if your phone's folder tree is available from the Windows Explorer and hopefully you can backup your data by then. Just make sure you have all the drivers ready.
Hope that helps.
cglegion said:
Hey mate, can you get into the recovery mode? Try flashing the TWRP recovery and boot by pressing power button + home button + volume up and find an option to mount your USB storage via USB cable and see if your phone's folder tree is available from the Windows Explorer and hopefully you can backup your data by then. Just make sure you have all the drivers ready.
Hope that helps.
Click to expand...
Click to collapse
Yeah, I can get into recovery mode. But how do I get the TWRP to my phone? Do I have to put it on my external memory card and then load it from there?
And I could only find it for a S2 Exhilarate SGH-i577 device. Does it matter if my phone is a S2 GT-I9100?
I've never rooted my phone earlier. Is a root necessary to flash a ROM?
dinho10r said:
Yeah, I can get into recovery mode. But how do I get the TWRP to my phone? Do I have to put it on my external memory card and then load it from there?
And I could only find it for a S2 Exhilarate SGH-i577 device. Does it matter if my phone is a S2 GT-I9100?
I've never rooted my phone earlier. Is a root necessary to flash a ROM?
Click to expand...
Click to collapse
Correct. Put the TWRP zip on your external and flash it normally via recovery mode such as CWM not the android 3e recovery. Or find an odin flashable zip for yoyr device.
I am very sure there is one for I9100 because I ran into the exact same problem before and managed to figure it out. You just have to search for it can't give you a link because I'm on mobile now.
You need to root your phone in order to install a new recovery such as TWRP/CWM or even flash new kernel and ROM.
Good luck.
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls