Hello Friends,
I have got twrp and cwm recovery installed in my phone.When i start my phone in recovery it runs in cwm recovery and when i reboot my phone iit runs twrp instead of my rom.I tried wiping the data through cwm recovery, but with no success.I have got stock jb installed on my phone. Please help.
You saying that phone cant boot ? Try to flash again the recovery you want (Flash the right recovery! For Hboot 1.24 flash ics, for 1.25 flash jb) then go to recovery) Or just flash the stock recovery ? You can find it in the forum.
Sent from my Desire X using Tapatalk
Sounds to me like you flashed JB recovery on ICS hboot.
mefistoreyon said:
You saying that phone cant boot ? Try to flash again the recovery you want (Flash the right recovery! For Hboot 1.24 flash ics, for 1.25 flash jb) then go to recovery) Or just flash the stock recovery ? You can find it in the forum.
Sent from my Desire X using Tapatalk
Click to expand...
Click to collapse
yes i can boot my phone in twrp only.When i switch on my phone it enters into twrp directly instead of rom and when i start it in recovery it enters in to cwr.i installed stock recovery also which replaced cwr but with no success.my phone still boots in twrp
nightwalkerkg said:
Sounds to me like you flashed JB recovery on ICS hboot.
so wat happens when one does that??
i mean does my problem looks the same??
wat to do please help me
Click to expand...
Click to collapse
amzyaamir said:
yes i can boot my phone in twrp only.When i switch on my phone it enters into twrp directly instead of rom and when i start it in recovery it enters in to cwr.i installed stock recovery also which replaced cwr but with no success.my phone still boots in twrp
Click to expand...
Click to collapse
You installed twrp to boot partition, that's why it boots directly into twrp (using fastboot flash boot twrp.img) You need to flash TWRP to recovery partition (using fastboot flash recovery twrp.img). Then enter recovery, install ROM, and flash boot image to boot partition (fastboot flash boot boot.img).
dansou901 said:
You installed twrp to boot partition, that's why it boots directly into twrp (using fastboot flash boot twrp.img) You need to flash TWRP to recovery partition (using fastboot flash recovery twrp.img). Then enter recovery, install ROM, and flash boot image to boot partition (fastboot flash boot boot.img).
Click to expand...
Click to collapse
thank you for your help.i flash boot boot.img file and twrp got replaced.but i have come up with a new problem now.my phone is s- on and its not accepting the rom which i downloaded from here(2.20.401.5_Deodexed). i thought because my phone is s-on it might accept the original jb rom(ROM_JB_STOCK_HTC_DESIRE_X_INDIA_HTC__038) but still even this version is not installing. so now my phone is not having any rom.what should i do???
I had stuck on ASUS logo, after I do a lot of researches, a lot of trials and errors for 4 hours. I managed to fix them and I wanted to share how I did here.
Easiest way to root lollipop WW-12.2.2.27
use KingRoot from http://www.kingroot.net/down ,It is android app which will run exploit to root the device successfully.
Not Kingoroot Kingoroot was unable to root. Towelroot v1 works only on Kitkat, but not lollipop.
To boot into fastboot mode
adb reboot bootloader
OR turn off device, press and hold power and volume up, until asus logo appear, and stuck at asus logo, that is fastboot mode, to exit fastboot with buttons, press and hold vol down and power button.
To restore stock recovery and ROM after you install TWRP or CWM, or unbrick device
First, note that stock recovery from http://forum.xda-developers.com/showpost.php?p=59055653&postcount=29, does not work for me (maybe everyone else as well).
I flashed it using fastboot flash recovery recovery.img, when I try to boot into recovery using, vol down and power, then select enter recovery, it stucks at asus logo.
First you need to flash TWRP_2.8.7.0.img from http://quarx2k.ru/asus_padfone_s/recovery/
using fastboot flash recovery TWRP_2.8.7.0.img It will show that flashing FAILED (remote: can't flash unsigned image), it fact, it was succeeded, now you can go ahead and boot to recovery.
Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo. But now, we are going to need TWRP_2.8.7.0 to unlock bootloader.
Let's unlock bootloader
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP
You can check bootloader status with fastboot oem device-info
Before unlock :
(bootloader) Device unlocked: false
After unlock
(bootloader) Device unlocked: true
Let's flash stock Kitkat Firmware
You have to unlock bootloader becuase, well it is complicated.
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is http://datbak.com/links/padfone_s/asus_t00n_twrp_2_7_1_1.img
But this recovery has another bug, if you flash recovery and try to boot to recovery, you will get blank screen, but TWRP is indeed working, you touch the screen and it vibrates back. Anyway you have tofastboot flash recovery asus_t00n_twrp_2_7_1_1.img because it will be needed later for upgrading Kitkat to Lollipop.
If you don't unlock bootloader, you will not be able to boot into recovery directly without flashing to recovery partition Now let's get into fastboot mode, and fastboot boot asus_t00n_twrp_2_7_1_1.img, by booting into this recovery directly via fastboot without flashing it first, you will not get black screen bug of this recovery., if you boot to this recovery from recovery partition, you will get black screen as I told previously.
Now let's flash downgrade to 4.4.2 firmware from http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-99.99.99.0-user-wipedata.zip with TWRP 2.7.1.1.
This is for only WW SKU, not TW SKU. And all userdata will be wiped.
Browse all firmwares and there is TW SKU downgrade here : https://www.asus.com/Phone/PadFone_S_PF500KL/HelpDesk_Download/
Ok, now reboot to system, and yeah, it finally boots now.
The recovery is still TWRP, not stock one, let's upgrade to lollipop and restore stock recovery using TWRP. Simply place http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-12.2.2.27-user.zip to root of Internal Memory, unplug usb, press confirmation in notification to begin install lollipop. After device reboot, it will stay blank screen for 5 minutes, don't worry, it is updating to lollipop, after upgrade is done, it will reboot, and recovery will be restored to stock recovery now.
Bootloader is still unlocked.
Another method to root is
fastboot flash recovery asus_t00n_twrp_2_7_1_1.img (recovery is restored to stock now remember)
then flash https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1 with TWRP.
To lock bootloader again, boot into fastboot
then fastboot oem reset-dev_info
But I wouldn't recommend you to lock bootloader, you will lose ability to boot to TWRP recovery without replacing stock recovery, unless you are going to send your device to service center and claim warranty.
Files, fastboot and recoveries and bootloader unlock and super su for rooting
asus_t00n_twrp_2_7_1_1.rar https://mega.nz/#!355UmTCb!0Jn-0wlbGHG7lir8u9vq1l8BrR3dsepDdigqfJ9wRPk
twrp_2.8.7.0.rar https://mega.nz/#!GwRRBBjT!8ms39GK62XHairHOrxlmNJCwA-bDeaKA816Cg4lsQr0
Will this work for S Plus model?
It wont, using files from this thread might brick the device.
Sent from my SM-N910C using XDA Free mobile app
Hi im a noob so ill get straight to the point.
You said "Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo."
I have two question as follow:
1. So can i use twrp to flash stock rom or not?
2. Because I'm still at Kit Kat, I dont need to unlock bootloader and flash Kit Kat firmware right?
3. If so, Can I follow the tutorial until flashing the TWRP? but which TWRP that I need to install?
4. All these tutorial to unbrick needs to be done before you brick your phone right? What should i do if i already brick my phone?
Kindly advise.
ChevanLemon said:
Hi im a noob so ill get straight to the point.
You said "Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo."
I have two question as follow:
1. So can i use twrp to flash stock rom or not?
2. Because I'm still at Kit Kat, I dont need to unlock bootloader and flash Kit Kat firmware right?
3. If so, Can I follow the tutorial until flashing the TWRP? but which TWRP that I need to install?
4. All these tutorial to unbrick needs to be done before you brick your phone right? What should i do if i already brick my phone?
Kindly advise.
Click to expand...
Click to collapse
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is asus_t00n_twrp_2_7_1_1.img
If you are bricked, but you can still access fastboot mode, then you can unbrick and reflash stock firmware to your phone
First of all, Thank you so much for this GUIDE
Here are my doubts, and hoping for confirmation from you. My Padfone S is running well on latest kitkat firmware, rooted with SuperSu and TWRP 2.7.1.1 installed. Now, I wished to upgrade to Lollipop firmware.
Can I use the TWRP 2.7.1.1 to clean install the lollipop firmware instead of the stock recovery because I wished to wipe date, cache as well as SYSTEM before flashing?
My concern is I afraid if wipe the SYSTEM then the TWRP 2.7.1.1 would not be able to flash the Lollipop firmware successfully. Do I need to unlock bootloader in my case?
If I can do so, then can I still use the Flashify to flash TWRP 2.7.1.1 on the lollipop firmware, or I must use "fastboot flash recovery TWRP_2.8.7.0.img" method.
Thanks in advance for your kindly reply.:laugh:
Bootlooped
When I am upgrading my SuperSU and it requires a reboot,it automatically boot looped itself.
What should I do?
Linux4ever85 said:
Will this work for S Plus model?
Click to expand...
Click to collapse
Yes it work. Mine is Asus Padfone S Plus. Got bootloop problem. I have followed ninekaw guide. Thanks Ninekaw. U have save my precious padfone s plus
ninekaw9 said:
I had stuck on ASUS logo, after I do a lot of researches, a lot of trials and errors for 4 hours. I managed to fix them and I wanted to share how I did here.
Easiest way to root lollipop WW-12.2.2.27
use KingRoot from http://www.kingroot.net/down ,It is android app which will run exploit to root the device successfully.
Not Kingoroot Kingoroot was unable to root. Towelroot v1 works only on Kitkat, but not lollipop.
To boot into fastboot mode
adb reboot bootloader
OR turn off device, press and hold power and volume up, until asus logo appear, and stuck at asus logo, that is fastboot mode, to exit fastboot with buttons, press and hold vol down and power button.
To restore stock recovery and ROM after you install TWRP or CWM, or unbrick device
First, note that stock recovery from http://forum.xda-developers.com/showpost.php?p=59055653&postcount=29, does not work for me (maybe everyone else as well).
I flashed it using fastboot flash recovery recovery.img, when I try to boot into recovery using, vol down and power, then select enter recovery, it stucks at asus logo.
First you need to flash TWRP_2.8.7.0.img from http://quarx2k.ru/asus_padfone_s/recovery/
using fastboot flash recovery TWRP_2.8.7.0.img It will show that flashing FAILED (remote: can't flash unsigned image), it fact, it was succeeded, now you can go ahead and boot to recovery.
Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo. But now, we are going to need TWRP_2.8.7.0 to unlock bootloader.
Let's unlock bootloader
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP
You can check bootloader status with fastboot oem device-info
Before unlock :
(bootloader) Device unlocked: false
After unlock
(bootloader) Device unlocked: true
Let's flash stock Kitkat Firmware
You have to unlock bootloader becuase, well it is complicated.
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is http://datbak.com/links/padfone_s/asus_t00n_twrp_2_7_1_1.img
But this recovery has another bug, if you flash recovery and try to boot to recovery, you will get blank screen, but TWRP is indeed working, you touch the screen and it vibrates back. Anyway you have tofastboot flash recovery asus_t00n_twrp_2_7_1_1.img because it will be needed later for upgrading Kitkat to Lollipop.
If you don't unlock bootloader, you will not be able to boot into recovery directly without flashing to recovery partition Now let's get into fastboot mode, and fastboot boot asus_t00n_twrp_2_7_1_1.img, by booting into this recovery directly via fastboot without flashing it first, you will not get black screen bug of this recovery., if you boot to this recovery from recovery partition, you will get black screen as I told previously.
Now let's flash downgrade to 4.4.2 firmware from http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-99.99.99.0-user-wipedata.zip with TWRP 2.7.1.1.
This is for only WW SKU, not TW SKU. And all userdata will be wiped.
Browse all firmwares and there is TW SKU downgrade here : https://www.asus.com/Phone/PadFone_S_PF500KL/HelpDesk_Download/
Ok, now reboot to system, and yeah, it finally boots now.
The recovery is still TWRP, not stock one, let's upgrade to lollipop and restore stock recovery using TWRP. Simply place http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-12.2.2.27-user.zip to root of Internal Memory, unplug usb, press confirmation in notification to begin install lollipop. After device reboot, it will stay blank screen for 5 minutes, don't worry, it is updating to lollipop, after upgrade is done, it will reboot, and recovery will be restored to stock recovery now.
Bootloader is still unlocked.
Another method to root is
fastboot flash recovery asus_t00n_twrp_2_7_1_1.img (recovery is restored to stock now remember)
then flash https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1 with TWRP.
To lock bootloader again, boot into fastboot
then fastboot oem reset-dev_info
But I wouldn't recommend you to lock bootloader, you will lose ability to boot to TWRP recovery without replacing stock recovery, unless you are going to send your device to service center and claim warranty.
Click to expand...
Click to collapse
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP --> link dead
Hi thank for your guidance on how restoring stock rom . Im having trouble detecting my phone when in fastboot mode, as you said to boot up into fastboot hold vol up and power and we will stuck at asus logo , but after i connect my pc and using adb cmd fastboot devices it didnt detect any devices and cant proceed to next step when i need to fastboot boot twrp 2.7.1.1
Currently im using twrp 2.8.7.0 , i want to use stockcrom because i need to use my padfone station (since any custom rom is not compatible with padfone station), any suggestions for this problem ? Thanks in advabce
I tried to install custom rom in my lenovo p70, I successfully flash TWRP and I backup my device before proceeding in flashing this rom in "www.needrom.com/download/vibeui-3-5/". After I backup my device, I proceed in installing the rom using twrp but when it says reboot, my phone stuck in boot logo and keeps on restarting. The "Volume up + power button" still working and I got a chance in selecting recovery mode but when I choose it, it just stuck in boot logo and restart again. I tried flashing the TWRP again but no luck, I can't enter in recovery mode to restore my backup :crying::crying::crying: Please I need help
Assuming the backup via twrp is still in the internal storage, go to fastboot and boot the twrp image (fastboot boot *twrp.img*) and restore.
I'm stuck in fastboot sir. My previous ROM is android 4.4.4 64bit. Can I flash the stock rom using flashtool?
pryxen said:
I'm stuck in fastboot sir. My previous ROM is android 4.4.4 64bit. Can I flash the stock rom using flashtool?
Click to expand...
Click to collapse
Download ADB and Fastboot tool. Place the custom recovery image on the ADB and Fastboot folder. Turn on the device and go to fastboot then connect it to the computer. Open terminal/cmd: fastboot boot "name_of_the_recovery.img"
It should boot the custom recovery then you can restore your backup.
Or just flash the stock rom if you have it.
I also have the same problem. my stock rom on Lenovo-P70-A was kitkat 4.4.4. 32bit. i tried to install CM-13 64bit by following the procedure on this link: http://www.lenovoroot.com/2016/10/cyanogenmod-130-for-lenovo-p70-fully-working.html . but something went wrong. i flashed P70A_AOSP_5.1_64bit_v2 using SP Flash tool and then flashed cm-13.0-v1-UNOFFICIAL-P70 but when i rebooted the phone, it is in continous bootloop. turns on, shows logo for some seconds then again boot. i can go into fastboot mode but can not get into recovery. prevously my phone was rooted and i made backup with twrp on my usb flash but now how can i restore my backup from usb flash. i can not boot into recovery even from fastboot and can not flash twrp or other recovery from fastboot.
any help would be appriciated.
thanks in advance.
UPDATE: BOOT LOOP LENOVO P70-A PROBLEM SOLVED.
Before when i posted the bootloop problem. i was unable to turn off the phone and without turning off properly I was unable to flash stock rom with SP Flash Tool, but after searching i found this thread : https://forum.xda-developers.com/nexus-4/help/removable-battery-how-to-shut-phone-t1964992 .In this thread I found how to turn off a phone with a non removable battery. During bootloop when Logo appeared i kept press power button at least for 10 seconds and then phone powered off and no more boot loop. so I was able to flash stock image using SP Flash tool. now my problem solved and phone is working fine.