[ENGLISH - ESPAÑOL MAS ABAJO!!]
ADVISE: First of all, remember that you are the only responsible for what you do with your phone. I'll always try to help you and share my knowledge and experience, just as others do. But please read as much as you can BEFORE trying it! Ok, let's go:
► KDZ DOWNLOAD LINK FROM LG SITE: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWC9W5Q132VMABR926A6DWJ/H340AR10a_04.kdz
I've searched a lot for this KDZ, and could finally find it at http://devtester.ro/projects/lg-firmwares/country.php?country=Argentina .
At that page it's stated as a CLARO variant, but I can confirm that it is a NO-CARRIER clean ROM for Argentina. I don't know if it works in other countries. Keep in mind that, even if everything is working perfectly (at least in my Leon), every time you boot your phone, you will receive a little advice saying "Warning! Current version is not available for user. Can't find matchest cust for NT-code..." that means that this is not a ROM meant to be used by users, but devs. That's true, but you can just dismiss that advice, by BACK button and everything work fine without carrier bloatware. Personally, I felt my device more responsive. And I'm (let's see the bright side) *happy* that I needed to try this firmware after a brick, and not having the original KDZ for my carrier. [/B]
-----------------
How to FLASH it?
You will need to install LG USB drivers, LG Mobile Support tool, download LG FLASH UTILITY 2014, and the KDZ.
I'll show a method taken from this site, the same I've followed: Note that you don't loose any data with this method, unless you factory reset.
INSTALL IN THIS ORDER:
1) LG Mobile Support Tool [atached to this same post]
2) LG United Mobile Driver 3.14.1 https://mega.nz/#!oQV3yS6Y!D2JPtEMfHiAXB5E5jC2lfFH8ZIOVLNhEHju28JtYwfI
3)LG Flash tool 2014 https://mega.nz/#!BB8UgKCT!YAdGWfYGXGLiV5arZzeSGGivtLlW-BuiKlv_ci2Xp0Y [also atached to this same post]
After everything has been installed:
1. Remove the battery and put it back in.
2. Hold the Volume Up button (ONLY) while connecting the USB Cable to the PC
3. The Volume up button needs to be held until it reaches download mode (FIRMWARE UPDATE screen)
4. Open device manager in Windows and changed the LGE Mobile USB Serial port to COM 20
5. Open the LG Flash Tool 2014
6. Select Type: 3GQCT
7. PhoneMode: EMERGENCY
8. KDZ : Select the location where the KDZ has been downloaded
9. Click on Normal Flash
10. Click on START. And wait, it will open a new window.
11. On that window, click on "Clear update registry"
12. Country: different country
13. Language: English
14. Click okay and wait for the LG Mobile Support tool to recognize the device. It takes a minute or two but the tool will recognize it. The software starts the extraction and re-boots at %100. WAIT UNTIL IT REBOOTS! It seems to be frozen at 100% or 99$%, but it is NOT!
Once your device is in Android, you can remove USB cable, your device will boot normally, and the device is no longer stuck in a boot loop.
Click to expand...
Click to collapse
----------------
How to avoid bricking it?
Root - In my case I could root it with KingRoot apk, the LATEST FROM THEIR SITE (not xda, not other.. but kingroot site. Others didn't work)
TWRP - Meh, I wouldn't mess with it, if you want to avoid flashing kdz. Everything started there, in my case. TWRP couldn't flash correctly.
SuperSUMe - DO NOT use this! After using it to remove kingroot app and install superSU , reboot & bricked. Another person here told me it worked for him. But in my case that was the 'root' cause for the brick. Maybe the method by W0lf works! At least you can read the script and see what does it do. And it does not cost money... meh
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[ESPAÑOL!]
AVISO: Recordá que sos el/la unico/a responsable por lo que hacés con tu celular. Siempre voy a intentar ayudarte y compartir mis conocimientos, como lo hacen el resto de los usuarios de la comunidad. Pero intentá leer lo más que puedas ANTES de intentarlo. Ok? Vamos!
► LINK DE DESCARGA DEL KDZ DESDE SITIO LG: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWC9W5Q132VMABR926A6DWJ/H340AR10a_04.kdz
Estuve buscando mucho este KDZ hasta que lo contré en http://devtester.ro/projects/lg-firmwares/country.php?country=Argentina . Ahí está listado como ser de Claro Argentina, pero puedo confirmar que es una version LIMPIA developer, la que usan luego las compañías para llenarlas de bloatware. Ehm, digo, de hermosas utilidades de la empresa. QUizá funcione para otros paises, no lo se. Tené en cuenta que, incluso si todo funciona perfecto (al menos en mi Leon) cada vez que reinicias el celular, vas a tener un pequeño mensaje que dice "Warning! Current version is not available for user. Can't find matchest cust for NT-code..." que significa que la ROm no es para usuarios finales sino developers, y es cierto, pero simplemente podes descartar ese mensaje con el boton atrás. Personalmente, siento mi dispositivo más rapido. Por un lado estoy (busquémosle el lado positivo a todo) "feliz" de haber tenido un softbrick y no tener la KDZ de personal, porque pude probar ésta.
-----------------
¿Cómo flashearla? (y me refiero al KDZ!)
Necesitás instalar LG USB drivers, LG Mobile Support tool, y descargar LG FLASH UTILITY 2014, y el KDZ.
Este método a continuación es el que yo encontré en este sitio y fue el que utilicé. No perdés ninguna data usando este método, salvo que hagas reseteo de fábrica.
INSTALAR EN ESTE ORDEN:
1) LG Mobile Support Tool [adjuntado en este post]
2) LG United Mobile Driver 3.14.1 https://mega.nz/#!oQV3yS6Y!D2JPtEMfHiAXB5E5jC2lfFH8ZIOVLNhEHju28JtYwfI
3) LG Flash tool 2014 https://mega.nz/#!BB8UgKCT!YAdGWfYGXGLiV5arZzeSGGivtLlW-BuiKlv_ci2Xp0Y [también adjuntado en este post]
Luego de instalar todo:
1. Remover la batería y volver a colocarla
2. Conectar un extermo del cable USB a la PC y mantener presionado VOL+ mientras se conecta el otro extremo del cable al celular
3. VOL+ Tiene que mantenerse presionado hasta que aparezca la ventana de Firmware Update en el celular
4. Abrir administrador de dispositivos en Windows y cambiar el puerto COM de LGE Mobile USB Serial al COM 20
5. Abrir LG Flash Tool 2014
6. En Type seleccionar: 3GQCT
7. En PhoneMode: EMERGENCY
8. En KDZ : Seleccionar la ruta donde está la KDZ descargada (quiza sea óptimo tener todo en una carpeta en C:\, por si hay rutas largas)
9. Clickear Normal Flash
10. En la nueva ventana, clickear START. Y esperar... se abrirá una nueva ventana.
11. En esa ventana nueva, clickear "Clear update registry"
12. Country: different country
13. Language: English (yo lo hice así. Si está Spanish, quizá podes seleccionarla! O cambiar despues el idioma)
14. Clickear OK y esperar a que se abra LG MOBILE SUPPORT y reconozca el dispositivo. Esto puede tomar unos minutos, pero lo reconoce. Empieza a trabajar y al 99 o 100% parece que se frizea, pero tenes que ESPERAR a que se reinicie el dispositivo. Luego de reiniciar, ya podes sacar el USB cable. No antes de que salga de Firmware Update. Ya deberia estar funcionando sin problemas! Puede tardar un poco el primer boot.
Click to expand...
Click to collapse
----------------
¿Cómo evitar BRICKEARLO?
*Root - En mi caso lo rutié sin dramas usando el último KingRoot de SU SITIO WEB, no de xda, sino del sitio de ellos. Es una apk.
*TWRP - En mi caso no pude flashearla, y ahi empezó todo el problema. Pero no causó el root. Seguí el método "dd" y el de TWRP manager sin éxito.
*SuperSU Me - Éste guacho me lo brickeó. Un generoso compañero de XDA intentó ayudarme pasándome el dato, pero al correrlo, se brickeó. Quizá el método de W0lf funcione. Hay que probar. Al menos se puede leer el script para ver exactamente qué hace, y no cuesta dinero...
********************************** MUCHOS MÁS TUTORIALES EN MI CANAL EN YOUTUBE ******************************************
**************************** NUEVO APRENDIZAJE ► http://www.youtube.com/NuevoAprendizaje ************************************
I find this very interesting. I wonder if it would work on my T-Mobile LG Leon LTE (H345n)...What carrier variant do you have of the phone... Also.. just out of curiousity... I'm wondering if this rom takes up less internal storage on the phone. Because that would be real cool considering most of the firmwares take up more than half of the 8 gb internal storage. Would you mind checking that out and getting back to me about it?
Yazuken1 said:
I find this very interesting. I wonder if it would work on my T-Mobile LG Leon LTE (H345n)...What carrier variant do you have of the phone... Also.. just out of curiousity... I'm wondering if this rom takes up less internal storage on the phone. Because that would be real cool considering most of the firmwares take up more than half of the 8 gb internal storage. Would you mind checking that out and getting back to me about it?
Click to expand...
Click to collapse
I guess the only difference in storage would be anything carrier-related. None of those apps are installed. That includes games, carrier apps, promotions... This is v10a-722-34 LRX21Y, Android 5.0.1
Hola leandeganis, muchas gracias man me vino de 10 el post.
Pudiste encontrar alguna rom modificada que funcione bien con el Leon?
nmastellone said:
Pudiste encontrar alguna rom modificada que funcione bien con el Leon?
Click to expand...
Click to collapse
Nope, but I'm posting all improvements I do to stock ROM in this thread: http://forum.xda-developers.com/android/development/fix-low-mic-volume-bad-quality-headset-t3270558
What model Leon do you have? I have an lgl21 which is a straight talk variant. Called LG Destiny. Do you know if in that rom there is the oem unlock option in dev settings? The reason why I'm asking is because I'm trying to figure out how to unlock my bootloader to attempt to flash the c50 recovery to my phone. Just in case I get a brick I'll try this KDZ. But once I figure out how to pull my device tree and then try to port the 5.1 KDZ for my variant. I've never dev before so this is going to be a learning experience for me.
Failbringer60 said:
What model Leon do you have? I have an lgl21 which is a straight talk variant. Called LG Destiny. Do you know if in that rom there is the oem unlock option in dev settings? The reason why I'm asking is because I'm trying to figure out how to unlock my bootloader to attempt to flash the c50 recovery to my phone. Just in case I get a brick I'll try this KDZ. But once I figure out how to pull my device tree and then try to port the 5.1 KDZ for my variant. I've never dev before so this is going to be a learning experience for me.
Click to expand...
Click to collapse
No oem unlock. Only in 5.1.1 versions
http://forum.xda-developers.com/showpost.php?p=62275619&postcount=461
Following these steps you'll be able to remove the warning. It worked in my sister's LG Spirit. Cheers
Siguiendo estos pasos van a poder sacar el cartel, funcionó en el LG Spirit de mi hermana. Saludos
Question
Hi, i have a LG Risio from Cricket, is the model -lg-H343 but i dont see this model in the list room, do you know if i can brick my phone if i install a open room of Argentina, like the H340?..What do you think?
roberto217 said:
Hi, i have a LG Risio from Cricket, is the model -lg-H343 but i dont see this model in the list room, do you know if i can brick my phone if i install a open room of Argentina, like the H340?..What do you think?
Click to expand...
Click to collapse
You can try I think it should either fail in the flash process or succeed. But I think you should better try an specific kdz for your model. lg-phone-firmware.com and devtester.ro have lot of firmwares listed. Try with your imei.
igna.98 said:
http://forum.xda-developers.com/showpost.php?p=62275619&postcount=461
Following these steps you'll be able to remove the warning. It worked in my sister's LG Spirit. Cheers
Siguiendo estos pasos van a poder sacar el cartel, funcionó en el LG Spirit de mi hermana. Saludos
Click to expand...
Click to collapse
Gracias! Probaste instalar este kdz en el spirit? O como llegaste aca?
do you have a good link for this kdz? the old one is down
Buenas gente! Podrían pasarme las especificaciones técnicas del h340 LTE ya que estoy viendo si es posible flashar al h320 una banda base para que levante LTE! Por lo visto en la pagina de LG este modelo (h320) tiene LTE pero para una compañía de México.
Hi people, can u share tecnical hardware from H340 LTE , im tinking to port an base band to H320 it seems capable but unly whit a mexican carrier..
Sorry for my bad english.
Enviado desde mi XT1045 mediante Tapatalk
Compré mi celular en musimundo. Pero aún liberado, la rom que tiene está llena de basuras y hace lento todo el sistema. Incluso tenía mal configurado el cpu con planificacion noop y governor en performance, trabajando de 1.21ghz a 1.21ghz. La batería se moría en menos de 5 horas. Horrible. Usé el Kingroot y habia aplicaciones como una tal "Aplicativos nacionails" o algo por el estilo, con una bandera brasileña en el ícono. Me pregunto para qué carajo estaba ahi consumiendo ram. Por supuesto la eliminé junto con play fotos/videos/musica, el antivirus inservible y otras pavadas que consumian recursos.
Voy a flashear esta y usar el tutorial que está por ahi que mejora el uso de memoria por parte del sistema operativo.
Se agradece el aporte.
help,ayuda para ser root LG Leon
hola como puedo rootear lg leon h340ar con android 6.0 (segui tu tutorial pero el kdz lo saque de aqui
http://forum.xda-developers.com/leon/how-to/how-to-update-lg-leon-h340n-to-android-t3393648
). cuando tengo apretado el boton de encendido + volumen bajo solo aparece la opcion de restaurar de fabrica.
¡¡¡¡¡¿¿¿¿¿Para ser root tengo que cargar el zip de superSU,pero para hacerlo necesito tener un recovery personalizado Y Para instalar un recovery personalizado tengo que ser root.!!!???
Gracias de antemano.
Ayuda!
Buenas! Necesito ayuda...estaba haciendo bien todos los pasos hasta que llegue al 10
"10. En la nueva ventana, clickear START. Y esperar... se abrirá una nueva ventana."
Cuando hago click en START se cierra la ventana, pero no aparece ninguna nueva...y se queda asi, no pasa nada...que puedo hacer?
El celu sigue en 0% y solo dice que no tengo que desconectar el USB hasta que termine el proceso.
Se agradece cualquier ayuda
Luego de hacer esto todos los datos van a ser borrados? Yo lo hice, el boot no me arrancaba, hice el flash y lo pude hacer prender pero las apps, fotos y demas datos seguían ahí
che, tengo dos problemas: No puedo bajar el kdz, me dice "no file found" y 2do: tengo el kdz de claro (justo el stock de mi cel) y cada vez que flasheo el kdz el cel se queda en la bootscreen y se reinica
Sabes como puedo fixearlo?
I CANT DOWNLOAD ROM!
never download the rom from site!
blank page from the link...
totto210 said:
I CANT DOWNLOAD ROM!
never download the rom from site!
blank page from the link...
Click to expand...
Click to collapse
Como puedo descargar el KDZ?
I was trying to root the device with kingo root ..and all i got an endless boot loop
i searched for hours and hours and no rom no root methods .. i still have a recovery any body help pleaseeeeeeee ??????????
Boot loop en el celular zte z828
Saludos a todos los miembros de este buen foro, necesito ayuda ya que hice un root en el zte avid plus z828 con kingo root y todo bien un trabajo de practicamente todos los dias, pero cuando el telefono reinicio se quedo en boot loop, eh buscado en todas partes el update.zip para restaurarlo por recovery y nada, nadie hasta ahora tiene el software para el telefono, si algunos de los miembros de este foro tiene por casualidad ese firmware podria hacer el favor de subirlo ya que es urgente, soy estudiante de geociencias pero adoro la informatica y pues en estos momentos no tengo como pagar el telefono de la profe ya que encima el telefono es de una de mis profesoras encargada de darme una materia y encima es de calculo, soy de Venezuela!!! Si alguien de verdad lo tiene porfa le agradeceria con el alma, es de vida o muerte...
svp rom zte z828 pluz
---------- Post added at 09:38 PM ---------- Previous post was at 09:31 PM ----------
Samy2002 said:
I was trying to root the device with kingo root ..and all i got an endless boot loop
i searched for hours and hours and no rom no root methods .. i still have a recovery any body help pleaseeeeeeee ??????????
Click to expand...
Click to collapse
I have a router for the phone zte z828
Samy2002 said:
I was trying to root the device with kingo root ..and all i got an endless boot loop
i searched for hours and hours and no rom no root methods .. i still have a recovery any body help pleaseeeeeeee ??????????
Click to expand...
Click to collapse
I am still searching for a recovery.. You have a link for one??
If you have the Rogers ZTE Z828, I have it, I asked ZTE for it and in one week, they finally uploaded it! My phone is alive again after staying for one year untouched
Link: https://www.ztedevices.com/en/supports/z828rogers/ However I do not recommend downloading the wrong frimware, so if you don't have a rogers ZTE Avid Plus, contact ZTE
You can ask them and they might give it to you. Make sure YOU ASK THEM FOR THE SD CARD UPDATE and not stock frimware, otherwise they will ignore you.
dirtywordz said:
I am still searching for a recovery.. You have a link for one??
Click to expand...
Click to collapse
Yes, but I did not get a method to install it yet. Here is the thread:
Link: https://forum.xda-developers.com/android/software/rom-lineage-os-14-1-unofficial-zte-avid-t4079489
Hello guys, After 1 week using my new phone with my company (WOM chile) my 4g stopped working correctly ( slow, no signal, etc ) I restored my phone to factory settings, change the micro sim, speak with my company but the problem still persists.
I tested my 4g signal with an app "OpenSignal" it says that my network is "celular" in the speed test. testing it with a friend's phone ( Galaxy s7, same company) it says "wom network" and excellent speeds
My firmware is at G9650ZHU2ARC6, product code is g9650zajcho
is there a way to "reset, doing a fresh install" to the phone? like a flash to the modem, rom ? where can i find the correct files to do it with odin? maybe i can fix it that way
thanks
pd:sorry for my english
You may use SamFirm with CSC CHO to download your firmware.
Puedes usar SamFirm con CSC CHO para descargar tu firmware.
Im having the same problem here in Brazil.. Do you had find any solution? Thanks!
Neutrogeno said:
Hello guys, After 1 week using my new phone with my company (WOM chile) my 4g stopped working correctly ( slow, no signal, etc ) I restored my phone to factory settings, change the micro sim, speak with my company but the problem still persists.
I tested my 4g signal with an app "OpenSignal" it says that my network is "celular" in the speed test. testing it with a friend's phone ( Galaxy s7, same company) it says "wom network" and excellent speeds
My firmware is at G9650ZHU2ARC6, product code is g9650zajcho
is there a way to "reset, doing a fresh install" to the phone? like a flash to the modem, rom ? where can i find the correct files to do it with odin? maybe i can fix it that way
thanks
pd:sorry for my english
Click to expand...
Click to collapse
Por entero WOM sii.... jajajajaja bromas compadre. Flasheele el firmware CHO tradicional, sin tanta basura de compañias. Ademas de tener la actualizacion de seguridad de mayo. Si no sabe como hacerlo, me envia un inbox
fe.floresy said:
Por entero WOM sii.... jajajajaja bromas compadre. Flasheele el firmware CHO tradicional, sin tanta basura de compañias. Ademas de tener la actualizacion de seguridad de mayo. Si no sabe como hacerlo, me envia un inbox
Click to expand...
Click to collapse
Donde lo encuentro ?
https://www.sammobile.com/firmwares/galaxy-s9-plus/SM-G9650/ZTO/download/G9650ZHU2ARC6/215646/
There you go brother. That's your stock firmware.
fe.floresy said:
Por entero WOM sii.... jajajajaja bromas compadre. Flasheele el firmware CHO tradicional, sin tanta basura de compañias. Ademas de tener la actualizacion de seguridad de mayo. Si no sabe como hacerlo, me envia un inbox
Click to expand...
Click to collapse
Hey camarada cual sistema tienes en tu S9 plus ahorita ? Le puse uno de Trinidad y Tobago pero wifi calling ya no está haha ya no se como regresar ahora ya hasta salw como si fuera de claro no de Telcel
Good afternoon today I come to tell you that I have this stock room installed on my j5 prime G570M
(G570MUBU3BRF2) and I can not find the root !!
So I can not install another stock rom because it does not leave me, any one knows how I can do ?? is it possible to edit the recovey and put the root? I need help please!!
these are the names of the files you have installed:
AP_G570MUBU3BRF2_CL12686191_QB18701497_REV00_user_low_ship_meta.tar
BL_G570MUBU3BRF2_CL12686191_QB18701497_REV00_user_low_ship.tar
CP_G570MUBU3BRF1_CP10025277_CL12686191_QB18701497_REV00_user_low_ship.tar
HOME_CSC_UUB_G570MUUB3BRF1_CL13873148_QB18701154_REV00_user_low_ship.tar
the best idea I have is to modify the recovery myself to install it via odin, since thank you very much !!
Any solution?
fernandomanzolido said:
Good afternoon today I come to tell you that I have this stock room installed on my j5 prime G570M
(G570MUBU3BRF2) and I can not find the root !!
So I can not install another stock rom because it does not leave me, any one knows how I can do ?? is it possible to edit the recovey and put the root? I need help please!!
these are the names of the files you have installed:
AP_G570MUBU3BRF2_CL12686191_QB18701497_REV00_user_low_ship_meta.tar
BL_G570MUBU3BRF2_CL12686191_QB18701497_REV00_user_low_ship.tar
CP_G570MUBU3BRF1_CP10025277_CL12686191_QB18701497_REV00_user_low_ship.tar
HOME_CSC_UUB_G570MUUB3BRF1_CL13873148_QB18701154_REV00_user_low_ship.tar
the best idea I have is to modify the recovery myself to install it via odin, since thank you very much !!
Click to expand...
Click to collapse
Can U find any solution? i have the same compilation G570MUBU3BRF2 but I can not flash TWRP. Other users use a modified BL and next flash TWRP.
(si hablas español)
amigo, pudiste hacer algo? estoy con esa misma compilacion en un celular de un cliente. algunos usan un BL modificado para que permita instalar el TWRP, la ultima que han modificado parece ser de la compilacion G570MUBU2BRA3, pero la G570MUBU3BRF2 es bastante nueva. Lograste hacer algun downgrade por odin?
alguna solucion???
si hablo español
StanGumn said:
Can U find any solution? i have the same compilation G570MUBU3BRF2 but I can not flash TWRP. Other users use a modified BL and next flash TWRP.
(si hablas español)
amigo, pudiste hacer algo? estoy con esa misma compilacion en un celular de un cliente. algunos usan un BL modificado para que permita instalar el TWRP, la ultima que han modificado parece ser de la compilacion G570MUBU2BRA3, pero la G570MUBU3BRF2 es bastante nueva. Lograste hacer algun downgrade por odin?
alguna solucion???
Click to expand...
Click to collapse
no no pude hace nada todavia
Encontraste solución?.
Encontraste solución?.
Hello everyone, I need help since a friend flashed my Samsung A10s and according to him it appeared like this out of nowhere, I would take it to a technician but where I live there is no one who can fix that and since I have internet I wanted to learn and try to fix it myself If someone helps me it would be very helpful.
Buenas a todos necesito ayuda ya que un amigo me flasheo mi Samsung A10s y segun el aparecio asi de la nada, lo llevaria a un tecnico pero donde vivo no hay nadie quien pueda arreglar eso y como tengo internet queria aprender y tratar de arreglarlo yo mismo, si alguien me ayuda seria de mucha ayuda.
@jimmysxx20
Flash Samsung's Combination ROM related to your phone using ODIN.
Hey there, its late but wanted to know, did u fix the issue and how,, I might have a few tips