Hi guys, I'm new here, so I'm sorry if I'm not doing this properly.
I have Alcatel Flash 2 phone (7049D) and I accidentally hard-bricked it while trying to root my phone. I used this tool called "Smart Phone Flash Tool". I turned my phone off,press the Download button on the software,and then I press Power+Volume Up button on my phone,the Download process on the software showed 64% completion but then it showed Error Message (can't remember what it is), and after that I can't turn my phone on however I tried. I already tried pressing every button for a while (ex : Power button, Power+Volume Up button, etc), still not working. And when I connect it to my laptop, somehow my laptop also can't recognize it,it makes the sound that it connects but it says "Unknown device" on Device Manager with yellow exclamation mark on it. Can anyone please tell me how to fix it? I read some articles that this kind of situation might be the end for my phone,but I just hope that there might still a chance for me to fix it. Hope someone can help me, thx a lot.
You made a hard-brick, let some expert come and answer to your question, For now your phone is in HARD-BRICK and you cannot do anything to it simple.
Salman Al-Badgail said:
You made a hard-brick, let some expert come and answer to your question, For now your phone is in HARD-BRICK and you cannot do anything to it simple.
Click to expand...
Click to collapse
So,my point is,is there any possibility that a hard-brick is repairable? Because I've been going left and right, calling many repair shops, and none of them can repair my phone, simply because it's new, not many people have Alcatel Flash 2. I will in the end bring my phone to Alcatel Service Center of course if there's no other solution, but I'm holding it as a last resort since it's gonna cost more.
The phone cost is around (USD-$132 . 58), go to the service centre they might help you on this,
i have the same problem......just this morning i accidentally installed incompatible rom on my flash 2 and now it wont open ....... my laptop will detect it for about 3 seconds and then nothing........
[email protected] said:
i have the same problem......just this morning i accidentally installed incompatible rom on my flash 2 and now it wont open ....... my laptop will detect it for about 3 seconds and then nothing........
Click to expand...
Click to collapse
Did you solved the problem?
Related
After ROM upload my HTC Hero show only some logo like device out of box. Nothing else is going. Button combinations for bootloader access is not working. Any ideas?
I managed to skilfully brick mine too, is a there a way to get it to boot up via key combination or using USB from a computer?
We are three now.
I know (presumably) my error: I flashed an SPL zip package that could be of the wrong type (Dream).
The boot shows the phone logo (mine says G2 T-Mobile).
The home keydown at boot doesn't work.
Is there a possibility to unbrick it?
Hope someone tells you how to unbrick it as I was about to do the update the ROM, not sure I want to do it now.
Right this is very weird as i had the same picture on my phone and thought it was bricked too..
BUT i just did a soft reset call menu end together. Then i did a hard reset as i wasnt sure if the soft one had done anything. Battery out then in and start up phone whilst holding down house and back key and then it started to boot up. So not sure if this helps anyone i doubt it as its very random but i thought id share just in case!!!
I had just flashed my radio when mine did this..
friend of mine had tha problem too, he had to send his device to htc.. 50 bucks ;-)
hmmm ... i am one of u guys now ...
no matter what key-combo i press, it just show a BOX and an arrow and a phone ... 3 sec later, phone turns off, no matter hwat key u press, it is not doing anything until u unplug the batery ... then when u turn it on, it repeat the same thing again
check if you can access fastboot via back+power when the phone is off. if so install recovery image and then install correct rom. if not i guess you're screwed, not sure though.
This guy
http://forum.xda-developers.com/showthread.php?t=556038
seemed to have the same issue and resolved it.
Hope it helps/good luck!
sonatbey said:
i bricked very bad no screen no logo not booting. anyway any helps
Click to expand...
Click to collapse
Please be more explicit as to what exactly you did.
(for someone to help you)
I have tried to reboot to recovery via Rom Manager now my ace doesn't start anymore, the sceen is black, even when usb is pluged in
can anyone help me?
Just start to download mode an try flash firmware... follow flash tutorial...
to flash another rom, the phone must start
it doesn't matter whitch buttons are pressed, nothing happend
So read how to unbrick galaxy ace...
doesn't work :'(((((((((
try to remove th battery and thec klick ok+vol down +power and when you doing that connect the battry again
it worked with me
P1tt187 said:
I have tried to reboot to recovery via Rom Manager now my ace doesn't start anymore, the sceen is black, even when usb is pluged in
can anyone help me?
Click to expand...
Click to collapse
Well you mest up with rom manager without any knowledge about it. AFAIK Your phone is now fully brick. You need to replace your motherboard(GOOD LUCK WITH WARRANTY )
Sent from my GT-S5830 using Tapatalk
If Flashing and Unbrick not working, what ever you do or how you try, then you probably messed up your boot ROM and it´s BRICKED. SORRY FOR YOU, but always, I MEAN ALWAYS read and search the forum 10 TIMES, before you start up messing your phone. It can very yeasely BRICKED.
I hope you can change it from service for free. Say that you trying restore to FACTORY setting(just make up some story[believable], why you was need to restore to FACTORY settings). Maybe they belive you and change your BRICKED phone to new one. Thumbs up for you and dont do anything stupid next time!!!
P1tt187, just out of curiosity - how did you even do that?
When I tried to use ROM Manager it told me to install the correct drivers, but Galaxy Ace isn't supported, so I just resigned. Which drivers did you use?
P1tt187 My friend had the same thing, he used a ROM Manager to back up the ROM in the ACE. Identical symptoms. Only the Samsung service will help. Tell him that you turned off phone and not turn on (Phone) . Samsung Service exchanged him motherboard in ACE (on guarantee).
Galaxy Ace not supported yet by ROM manager! Sorry for you but search the forum(or just GOOGLE it) before trying something first. There is always GOOGLE to helping(if you not found it here). Just USE it!
I have rooted and customized all my phones(HTC, SAMSUNG), JAILBREAKED AND UNLOCKED all my IPhones(3G and 4G), just waste some time, for GOOGLE! But you must be patient. Everything is not coming in first search(but everything is there, TAKE THE TIME and be sure for right thing).
CHEERS!
Hey,
I just have the same problem, but I didn't touch to the ROM or anything else
I just rooted my phone with SuperOneClick, turn it off and it never turn on again...
Since my phone is rooted, I don't know if the warranty is lost, but I think so...
I already tried to remove the battery and then put it back while holding ok + volume down + power, but it didn't work, the screen stays completely black...
I'll let my phone rest a few days and then send it to Orange while I pray --'
Any other idea guys ?
( sorry for my bad english...)
raphdu57 said:
Hey,
I just have the same problem, but I didn't touch to the ROM or anything else
I just rooted my phone with SuperOneClick, turn it off and it never turn on again...
Since my phone is rooted, I don't know if the warranty is lost, but I think so...
I already tried to remove the battery and then put it back while holding ok + volume down + power, but it didn't work, the screen stays completely black...
I'll let my phone rest a few days and then send it to Orange while I pray --'
Any other idea guys ?
( sorry for my bad english...)
Click to expand...
Click to collapse
Try to reflash with original version. Read this and try:http://forum.xda-developers.com/showthread.php?t=1034145
or try to unbrick it, here:http://forum.xda-developers.com/showthread.php?t=1071970
I'v tried to unbrick my phone, but it stucks on Odin at <1> setup connection..
I've let it run for 1 hour, but nothing changes
On the thread you gave me someone say that there is no solution for that...
What I don't understand is that I neither Flashed or tried to change the Rom of my phone, I only rooted it with SOC...
Anyway thanks for the help, I'll send it to Orange in a few days...
raphdu57 said:
I'v tried to unbrick my phone, but it stucks on Odin at <1> setup connection..
I've let it run for 1 hour, but nothing changes
On the thread you gave me someone say that there is no solution for that...
What I don't understand is that I neither Flashed or tried to change the Rom of my phone, I only rooted it with SOC...
Anyway thanks for the help, I'll send it to Orange in a few days...
Click to expand...
Click to collapse
Of course I dont know what you exactly done or not but if its stuck in black screen and cant flash with ODIN, then I think its TOTALLY bricked. Sorry for you, hope you get it changed to new one! THUMBS UP FOR YOU!
my Huawei Ascend Y210 won't open, recharge or enter any mod (download mod\ recovery mod), I've update the official FW from the Huawei support site, with normal update storage>update. after it finish update the mobile restart, and won't open after that, when i connect it with my computer i get notice that my mobile had attached, but the mobile driver don't install. and that video explain my problem when i attach the charger or the USB cable with pc OMG i can't add outside links can you guys search on youtube with ( dead android phone Huawei Ascend Y210D ), please help me, if there any solution. thank you
I don't really need to search to know , you probably have a soft or hard bricked phone in your hand, let me guess, this started after you flashed a custom ROM to your phone?
no
Warped420 said:
I don't really need to search to know , you probably have a soft or hard bricked phone in your hand, let me guess, this started after you flashed a custom ROM to your phone?
Click to expand...
Click to collapse
no no it wasn't custom ROM, that was the official software, is there any way to fix that phone, please?!
ok sorry i see you said FW --firmware update. I was at work, and your situation sounded just like when i flashed the wrong rom on my phone. it was for a different device. and it bricked it.
i have heard of these situations with updates, eventhough it is from the company, something goes wrong during the process and bricks it.
Your phone if it hasn't been rooted can be RMA'd back to the company, if still under warranty. You can try to play with it yourself, but if you cant get to recovery or download mode, that won't be easy.
this will sound stupid but did you take the battery out and hold the power button for 30 seconds..
Some customer service guy told me to do that.
of course my phone was too messed up for that to work , but worth a shot.
Warped420 said:
ok sorry i see you said FW --firmware update. I was at work, and your situation sounded just like when i flashed the wrong rom on my phone. it was for a different device. and it bricked it.
i have heard of these situations with updates, eventhough it is from the company, something goes wrong during the process and bricks it.
Your phone if it hasn't been rooted can be RMA'd back to the company, if still under warranty. You can try to play with it yourself, but if you cant get to recovery or download mode, that won't be easy.
this will sound stupid but did you take the battery out and hold the power button for 30 seconds..
Some customer service guy told me to do that.
of course my phone was too messed up for that to work , but worth a shot.
Click to expand...
Click to collapse
yes i need to know how to get in download mode with this situation, did you see the video on you tube?! please watch it
i tried to take the battery out and hold the power button and it did't work
Hi everyone, I think I just bricked my device. I got my new e970 with 4.04 yesterday and today when trying to flash the new 4.1.2 using lgnpst tool, the process halted at 85% giving out an error stating that the firmware isn't supported. When I unplugged the phone and tried to boot, nothing happened. I am assuming that it's bricked.
Additional info:
When I hold the power button for 30 secs while connected via usb, the red led flashes for 2-3 secs and the PC makes a sound as if it had detected a new hardware (but nothing happens though )
On opening the device manager, I was able to see a "Qualcom HS-USB QDLoader" under the ports tab. And the "usual unknown" device offcourse.
The device wasn't rooted or bootloader unlocked
PS: I have tried to enter the download mode. But it didn't work either.
Help of any kind is welcome
I am sorry to tell you that is a hard brick. It needs to be jtagged, search for Mobiletechvideos.com
Andromann said:
Hi everyone, I think I just bricked my device. I got my new e970 with 4.04 yesterday and today when trying to flash the new 4.1.2 using lgnpst tool, the process halted at 85% giving out an error stating that the firmware isn't supported. When I unplugged the phone and tried to boot, nothing happened. I am assuming that it's bricked.
Additional info:
When I hold the power button for 30 secs while connected via usb, the red led flashes for 2-3 secs and the PC makes a sound as if it had detected a new hardware (but nothing happens though )
On opening the device manager, I was able to see a "Qualcom HS-USB QDLoader" under the ports tab. And the "usual unknown" device offcourse.
The device wasn't rooted or bootloader unlocked
PS: I have tried to enter the download mode. But it didn't work either.
Help of any kind is welcome
Click to expand...
Click to collapse
If you really just got it brand new, just take it back, tell them it was working then just completely stopped.
Next time let the firmware update over the air, personal recommendation
Then freegee yourself, and you may never have to see LGNPST ever. (I've never used it so, here's hoping)
Also, if the OTA update isn't showing up, call AT&T and tell them to push the update, they will.
[r.]GimP said:
If you really just got it brand new, just take it back, tell them it was working then just completely stopped.
Next time let the firmware update over the air, personal recommendation
Then freegee yourself, and you may never have to see LGNPST ever. (I've never used it so, here's hoping)
Also, if the OTA update isn't showing up, call AT&T and tell them to push the update, they will.
Click to expand...
Click to collapse
I think he is in India.
Thanks for your reply guys. @adfurgerson That's correct. India it is. And I've checked the options available for JTAG ing the phone, but there are no reliable people here. @[r.]GimP lol, I don't think LG would be that trusting to believe that the bootloader self destructed by itself. But thanks anyways, that'll be my last resort if I can't get it to run.
Right now, I am looking at these
http://forum.xda-developers.com/showthread.php?t=2208289&nocache=1
http://forum.cyanogenmod.com/topic/71825-hard-brick-to-hell-and-back-guide-to-recovery
to get into the download mode. I'll keep this thread posted with any kind of progress I make
http://forum.xda-developers.com/showthread.php?t=2330488
Relevant thread.
adfurgerson said:
http://forum.xda-developers.com/showthread.php?t=2330488
Relevant thread.
Click to expand...
Click to collapse
Thanks for the info. I saw the thread. But, ultimately the success story ended with JTAG ing. I hope it won't to be the case with mine.
http://webchat.freenode.net/?channels=lg-optimus-g
Link to irc.
adfurgerson said:
http://webchat.freenode.net/?channels=lg-optimus-g
Link to irc.
Click to expand...
Click to collapse
Wow, thanks. I never knew I could find devs in irc. Awesome. I am not giving up on this lovely brick (for now) without a fight!!
http://forum.xda-developers.com/showthread.php?t=2208289
Another link.
adfurgerson said:
http://forum.xda-developers.com/showthread.php?t=2208289
Another link.
Click to expand...
Click to collapse
One of the first threads where I went to search desperately for help
JTagging did the trick!
Hello everyone, I just thought of sharing my experience resurrecting my hard bricked ATT LG Optimus G. After various desperate attempts to recover the device without opening it, I was left with no choice but to send it for JTagging. Amid safety concerns, I sent the phone for repair at a local store in Chennai and amazingly, the phone got back in brand new, fully working condition!! The servicing cost just 1500 Rupees and took 6 hours. If anyone wants information about the store, you can PM me.
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
UKrugger said:
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
Click to expand...
Click to collapse
I am facing same thing here. The screen is not coming up at all, But I can hear sound too. ANyone else who has changed the screen successfully before?
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
DonMagnifico said:
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
Click to expand...
Click to collapse
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
UKrugger said:
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
Click to expand...
Click to collapse
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
change screen start logo screen after light on/off all the time 2sec
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
thank you to help me, all the day i'm trying solutions,after the screen change, Flashtool tell sucess download, but it continues to turn on and off with the logo elephone starts. in peripheral it appears and disappears every two seconds. i don't know if there is a room in my phone. how to inject the files in the phone with a Peripheric always on and off. help me please. after flashtool ok download the screenis black and nothing i move battery and after logo elephone on/off but nothing else. someone know the reason on/off and appear an desappear in device : Mt65xx USBVCOM.
tanguy66 said:
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
Click to expand...
Click to collapse
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
DonMagnifico said:
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
Click to expand...
Click to collapse
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
tanguy66 said:
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
Click to expand...
Click to collapse
no, it's not the battery. You made a mistake by flashing the rom, now you are in a boot loop. Ignore the message on the screen. Try to flash the rom again. start flashtool, select the scattertext, click download, hold vol+ button on the phone and connect the phone to the PC
PLEASE HELP me, can you give me a solution to start up the phone again
hello , before flash tool all is ok flashing GOOD, now it's more bad now i have no lignt no logo, and when use flash tool always stop download 20% BROM error: status dowwnload exeption (0xc0050003) (HINT) : , i don't know if i have a good battery
yesterday i have a new image appears it'a big beautiful battery only one bar after logo several times. i'm found an d try all solutions, 4 days , i sleep at 1 oclock. help to find a solution. how to know or test if the telephone is dead or little life.
OK now i arrived with flash tool i begin all zero, and message OK Good, i'm verry worried, no light , no logo??have you a solution to know if the battery now? thank you help.
do you know when the message tell OK,it means all things an room is now ok in the phone. I'm not sure
just now i'm testing battery with tester 3v 1ma it's good. how to do to light screen now. it's strange.
and with electric power it must work normaly ,or not if the battery dead?
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
DonMagnifico said:
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
Click to expand...
Click to collapse
thank you. i use flash tool v5.1620. i have windows 7 32 bit,mtk 65 vcom is update, i'm not sure what do you mean. newest firmware. i have last room for p9000. can you tell more details please or more link to succeed. i read, and i trying a lot, now i swimming again.
UKrugger said:
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
Click to expand...
Click to collapse
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
tanguy66 said:
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
Click to expand...
Click to collapse
Sorry, I can' t help you more. All I know i telled you. But write a private message to skeleton1911, he has a great experience in reactivating Phones. May be he can help you.
P9000 screen replacement
Hi . I had my p9000 about 2 months when I sat on it and cracked the screen,the casing was very slightly curved so I gave it to a shop to repair,now nearly 2 months later they say they can't get it to start up. They tried a new battery and I told them what I'd read on this forum regarding flahing the rom but They gave me back the phone with a new screen and nothing else, so I told them i'm not paying for 1/2 a repair and told them to remove the new screen and give me back the phone as it was . What do you think could be the problem if a repair shop cannot repair a screen and install new sorftware is there hope for it?
Hi, i broked my screen again so i am not a newbie about this... but this time after flashing the Phone show nothing at all... the small LED Dot is shining when android is boot, so i dont think the cable is connected wrong. The touch works fine..What can it be??