My Casio GZOne Commando will not load past boot or open boot menu at all. I have tried waiting until the phone says " Now Loading " to do the button combination " Hold the: Power Button, Volume Up Button, and Press the Menu Icon ". I cannot get the boot menu to come up so I can't factory restore it. I have downloaded the SDK tried to run ADB Reboot Recovery in the CMD prompt after installing all of the files I needed to. I cannot get my computer (Windows 10) to offically recognize my phone. By that I mean I plug it into the computer and it makes a sound indicating that it detects a device being plugged in but when I check my computer it does not show up and the Reboot Recovery cannot detect any devices either. I am stuck and don't know what to do. I am pretty sure my device is rooted but am not 100% sure.I think it might be bricked. I'm not extremely informed on how that works but since I can't even run reboot recovery with the button combination or computer that seems to be the case. Any help would be greatly appreciated.
Related
I got a tablet device (Omega OT107) I've rooted it using
Code:
ro.kernel.qemu
method.
Next I'm triying to flash Custom Recovery and my problems started here.
What I've tried:
1.
Code:
flash_image recovery
- no success process of flashing never ends
2. Install bootmenu to /data/bootmenu
3. Installed 2 different 2Init's
None of this worked or even had an impact on how device works (it always boots in android correctly).
I've tried to boot it to fastboot mode to flash recovery from there but there is a problem that I have.
Volume(up or down) + Power buttons starts device to Android not to bootloader (I've read you need to remove and reinsert battery to make it work, but device has a build in batery and needs to be taken apart to remove it so I did not tryed it)
Code:
adb reboot bootloader
- boots to what I think is a bootloader (screen is black(no light is comming out of it)) when connected to Windows PC it is seen as Android Bootloader Interface (Android-SDK driver).
Code:
fastboot devices
does not discover any devices, clicking volume or power button does nothing.
Code:
adb reboot recovery
- boots devices it what seems to be useless recovery mode. At start there is a standing android dude with fireball on his chest, and imidietly changes to a lying position with his chest oppened and an exclamation mark comming out of it (I've red it is ok and I need to press Volume(down/up) + Power buttons to open recovery menu but it does not happen).
My question is:
Is it normal to some devices bootloader to look like mine? How to make it discoverable to fastboot?
I had this issue and I fixed with "press all the buttons!" and suddenly I sow recovery menu...to factory reset. if it doesn't work repeat with rebooting with pin
Does someone knows a way how to hard reset this thing?? ^^
about firmware
Any idea where find the firmware for this tablet?
Mine is now freeze on recovery logo
hard reset OT107
1.Turn off our tablet.
2 We press the MENU button at the same time + POWER HOUSE click and hold
3.Wait until the Android image.
4.Then VOL + button and the POWER and appears to us to Recovery Mode
5.Navigation is Vol-i + and confirmed by pressing POWER.
Hi,
I'm new here.
I have an issue. My Android phone is bricked. It is an MT6515 phone; model i9270+ (Chinese dual SIM phone).
I had trouble rooting it, so I was half way there following steps in THIS thread.
To see more specs. about this phone check HERE (chrome tells me that this site has malware, but I ignored it...)
On to the issue...
I accidentally flashed my phone with the wrong boot image from fast boot ("fastboot flash boot boot.img"). I had a clockwork mod backup copy of my own boot.img, so I just wanted to reflash it. Fastboot said that the flash failed.
I tried again, and then in the middle of the process my command prompt stalled. Phone was in flashing process for about an hour, so I hit Ctrl+C to stop it... I wanted to do a recovery from the phone itself using clockwork recovery...
When I wanted to boot my phone there was no screen light. The phone just vibrates twice and that's all.
PC won't recognize it, so I can't go back to fastboot mode. Key combination (vol up + power) won't bring fastboot mode...
This phone seems completely bricked...
Is there anything I can do to "revive" it?
I googled my issue, but I couldn't find anything useful. All simple solutions like getting the battery out for an hour, holding some weird key combinations, plugging it in USB on a different port, and such didn't get me any results...
Can anyone help me, please?
Thanks in advance!
More info...
Ok, I've just tested few more things:
When just holding a power button - phone vibrates once, and second time about 4 seconds after
When the battery is out and the phone is on USB - it does nothing
When the battery is in and I plug the USB (without pressing power) - it vibrates once, and second time about 1 second after
When holding Vol Up + Power (on this phone this is entering to fastboot) - does nothing
When holding Vol Up and plugging USB - PC recognized it as "SCI USB2Serial (COM10)" device, and the driver installation failed.
Before I typed this whole post PC recognized my phone as "unknown device", and the driver installation also failed.
Commant "adb devices" or "fastboot devices" does not recognize the phone while being plugged on USB.
When I plug it on electrical charger it vibrates twice just like pressing the power button.
Programs like "MTK Droid Root & Tools" do not recognize it...
Can anyone help me?
How to input in a new software? I have Boot.img, System.img and Recovery.img ...
@Admin -> you can close/delete this thread
I sold my phone... Some dude needed speakers, display and touch digitizer, so I this phone was of some good use for him
Hello XDA Community,
Sorry I didn't know where to post this...
Two weeks ago I purchased a Lenovo S8-50LC Tablet. It was working fine until last night, I was watching movies on Youtube and chatting with some friends. Then I went to bed and there was still around 50% charge in the battery.
When I woke up, I tired to wake up the device but it didn't respond. I thought it was stuck or something, so I tired to hold the power button for 20 seconds to do a hard reset but still didn't work. After that I plugged it in to a power source with the compatible charger that came with it and the screen light up with no data on it. I tried to power it on then and it showed the Lenovo logo and in a very tiny font underneath the logo it said "Boot Fail, Efi hard drive".
Then it would take me to a screen which says:
"EFI Shell version 2.31 [1.0]
Current running mode 1.1.2
map: Cannot find required map name.
Press ESC in 5 seconds to skip startup.nsh, any other key to continue.
Shell>_"
http://imageshack.com/a/img907/6979/reZJPf.jpg
and that's it!
I don't understand why this screen appears. I mean the tablet was working properly over the night and it had no issues whatsoever, but now it doesn't boot!
Then I tried to power it off and press Volume UP + Volume DOWN + Power Button, it showed a black screen with only one line: "FastBoot Starting...Can't get eMMC Info, revert to default value!"
http://imageshack.com/a/img661/1158/bRg9jj.jpg
That's all what I got...
PS:
1- The tablet does all that only when it's plugged to a power source, but when it's not plugged, it doesn't show anything.
2- When I plug it into the pc via USB, the pc doesn't recognize it.
3- I tried to boot into fastboot mode or recovery mode but it doesn't work either.
Please help me fix my tablet and I hope it's going to be soon. Thank you all in advance!
UPDATE:
1- I left it on the charger for maybe 2 hours and now it's turning on without being plugged in to a power source.
2- When I press Volume UP + Volume DOWN + Power Button, it shows the previous mentioned phrase, but now when I connect it to the pc via USB, windows recognizes it as Lenovo Composite ADB Interface under Android Phone
http://imageshack.com/a/img903/3907/oQdSAB.png
3- Tried to perform some fastboot commands like flash, format and erase, it always fails with the error:
Failed (remote: unknown command)
UPDATE2:
1- When executing ADB commands like adb devices it says "no devices found"
anyone?
Hello. A friend of mine has the same problem. He dropped the device and the screen cracked. After a reboot the tablet is on the same situation. I plugged a keyboard via otg , it stops the countdown in the EFI SHELL, but i can not type anything. I think is an eMMC related problem.
I guess the eMMC is totally fried or something. But, I mean, I didn't leave it on the charger all night or anything, why would it do such a thing!
any solutions or suggestions??
reflash the stock firmware: http://forum.xda-developers.com/showpost.php?p=58934356&postcount=90
mrhamed said:
reflash the stock firmware: http://forum.xda-developers.com/showpost.php?p=58934356&postcount=90
Click to expand...
Click to collapse
Thank you for your reply but it doesn't work .. as I mentioned earlier I don't have a "download mode" because any key combination I try to use just sends me to the shell window .. anymore suggestions would be appreciated!
-unplug usb cable
-turn off
-hold (volum+) and (volume -) towice
-press power button
It should go to fastboot quickly (a black screen with a little text)
Hi all,
I have just recently rooted my 306SH, the rooting process was fine. The problem started when I flashed an incompatible twrp image. Now I can't boot into anything it seems, no recovery, no fastboot and the power button will show only the logo screen. If connected to a power source the red led light will stay on even if unplugged. The device can be completely shut down and the red light off if I hold the down+volume and power down for few seconds.
I can connect it to my computer via usb by holding up+volume and power (green led light) . I installed google usb driver onto the android device and it stays connected for about 30 seconds to 1 minute. I tried using command prompt and SDK by typing "adb reboot recovery" but get an error message "error: device '(null)' not found.
Things I have installed on my computer:
(ADB, fast boot and drivers) https://forum.xda-developers.com/showthread.php?p=48915118#post48915118
SDK Platform-tools
306SH:
Google USB driver
Is there anything I can do from my computer? I was thinking maybe I can flash in an image to replace it. And also my sim card pops out and can't be set back in, is this due to the incorrect flashing?
Any help or input is greatly appreciated, I've been working on this for a while and is getting no where.
I'm a bit stuck here, would appreciate some assistance.
I tried to root my device (UMI Plus) by yesterday using 'SP Flash tool' by flashing TWRP and then installing SuperSU. That went fine, but after booting my Google Play Services kept rebooting rendering the device unusable. In an attempt to fix this I tried a "Factory Reset" via the Android settings menu which I guess was a bad idea because it started auto booting into Recovery... At that point no matter what I did I ended up back in Recovery.. Reboot to system, factory data reset.. all rebooted the phone back into TWRP recovery.
So I thought I would just try putting the default recovery back on the device again but whenever I power off the device and connect it to my PC it boots into recovery.. The phone needs to be powered off for SP Flash Tools to work. Tried loading recovery image via fastboot but the volume rockers don't work in fastboot so I can't confirm the action.
After some digging I read online that holding down VolUp + Power can 'force' into preload mode, which seems to have some success. I can see the device boot into "Preloader mode" in device manager in Windows, but it loses connection after about 3 seconds. So I did that with my SP flash tool ready and it seems to have erased recovery mode. Oops! Now whenever I try to get into recovery it just says "No command". No combination of button pressing, button holding, button releasing or anything will change this (This is the only answer I could find on Google!). Neither fastboot or adb can see the device either. It shows up as "MTP USB device" in device manager in Windows...
Is it doomed? I can't figure out what to do next...
P.S. The full ROM is available here but in RAR format.. which seems strange to me...
http://community.umidigi.com/thread-11462-1-1.html
Poke