TWRP 3.0.0 + H2OS Marshmallow firmware For The OnePlus 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
Instructions for flashing H2OS Marshmallow ROMs:
1. Flash the above zip. (It does not matter if you are using TWRP 2.8.7.0 or TWRP 3.0.0 or CM13 or CM12 or OOS)
2. Phone will reboot into new recovery. Do a wipe data/factory reset.
3. Flash the ROM zip (Get H2OS Marshmallow based ROMs from their respective threads, eg. Skydragon H2OS, Phoenix ROM,etc.) and done!
Flash this zip in recovery and all preparations for installing Marshmallow H2OS ROMs will be made and you will be booted into the new TWRP3 automatically.
Flashing this will also fix various problems people experience with H2OS based Marshmallow ROMs like stuck on OP logo, recovery not booting, camera or sensors not working, etc.
Working fine! Please test and report if something is broken. Thanks
This build works with HydrogenOS Marshmallow beta build!
It also has additional backup and restore support for firmware (tz,modem,aboot,hyp,etc.)
This zip is not for Lollipop/CM12/CM13.
How to revert back to Lollipop
1. Flash this in TWRP: https://www.androidfilehost.com/?fid=24421527759880816
2. Do a data wipe
3. Restore nandroid or flash Lollipop ROMs
Screenshots by @Spannaa
After flashing the zip and rebooting recovery, TWRP was still 2.8.7.0 from kingmercians h2os.
Extracted recovery(mm).img from the zip, flashed this, rebooted recovery and it worked this time.
Nice, orange theme and lots of backup options!
Cheers ?
Tapatalked via OnePlus 2
Will this work with kingmericans h2os builds..
By using this we don't need to flash the revert zip files provided by kstarz...??
We just need to flash firmware n ROM and then we are good to go right??
---------- Post added at 04:30 PM ---------- Previous post was at 04:26 PM ----------
Also is this hydrogen specific twrp or it can be used with oxygen and other cm ROMs as well...?
I tried to flash this on OxygenOS 2.2.0 rooted, with TWRP. It says that the procedure is sucessfull, but if I reboot the recovery I'm still on TWRP v2.8.7.0
PS: Sorry for my bad english
LordHelmchen89 said:
I tried to flash this on OxygenOS 2.2.0 rooted, with TWRP. It says that the procedure is sucessfull, but if I reboot the recovery I'm still on TWRP v2.8.7.0
PS: Sorry for my bad english
Click to expand...
Click to collapse
Read my post two above yours ?
Tapatalked via OnePlus 2
Spannaa said:
After flashing the zip and rebooting recovery, TWRP was still 2.8.7.0 from kingmercians h2os.
Extracted recoverymm.img from the zip, flashed this, rebooted recovery and it worked this time.
Nice, orange theme and lots of backup options!
Cheers
Tapatalked via OnePlus 2
Click to expand...
Click to collapse
Weird, I flashed like you said, try to reboot into recovery from the recovery, and it put my phone into fastboot mode...
Edit: But the official TWRP works...
Same for me, official 3.0 is working, with this recovery I'm not able to boot into recovery.
Edit: Nevermind Spannaa, just installed the kingmercians 6.0.1 and it works!
t4lent said:
Same for me, official 3.0 is working, with this recovery I'm not able to boot into recovery.
Click to expand...
Click to collapse
Which rom?
It works fine for me with kingmercians H2 OS 6.0.1 Marshmallow.
Tapatalked via OnePlus 2
Spannaa said:
Which rom?
It works fine for me with kingmercians H2 OS 6.0.1 Marshmallow.
Tapatalked via OnePlus 2
Click to expand...
Click to collapse
Personally, under OOS 2.2.0.
casual_kikoo said:
Personally, under OOS 2.2.0.
Click to expand...
Click to collapse
I'm not sure it's compatible with Oxygen OS2.
Tapatalked via OnePlus 2
Tes
Sent from my 2014817 using Tapatalk
so, with twrp 3.0.0.0 i can have the recovery and use the marshmallow beta?
Had to uncompress recoverymm.img and flash it. Then it works like a charm.
valexi said:
Had to uncompress recoverymm.img and flash it. Then it works like a charm.
Click to expand...
Click to collapse
not working for me this way.coming from twrp 3.(regalstreak)
beaverhead said:
not working for me this way.coming from twrp 3.(regalstreak)
Click to expand...
Click to collapse
I think that it doesn't work on OOS
valexi said:
I think that it doesn't work on OOS
Click to expand...
Click to collapse
i run blissmallow.
I installed this recovery and i can't use it with oxygen 2.2.0 :C i'm trying to install regular recovery v2.8.7 and it doesn't boot any ideas :C thanks
Why twr is not for Samsung Core prime G361H 3G
Please help us
Sent from my SM-G361H using Tapatalk
With this TWRP work otg ????
Related
Firefox OS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Builds are made from Firefox OS code only.
You can install them via fastboot and recovery.
Nightlies
They are done each night automatically.
Others versions
Nightly : everyday
Test : Monday
v2.5 (Aurora) : Tuesday
v2.2 (Beta) : Wednesday
v2.1 : Thursday
v2.0 : Friday
v1.4 : Saturday
Warranty
I don't test all of them, some builds may have issues and/or erase your datas.
Screenshots
Changelogs
v1.4
v2.0
v2.1
v2.2
v2.5
What doesn't work
Calc - Firefox OS on Nexus 5
Download
http://ffos.vosky.fr
POLL
What do you need on Firefox OS to use it as your only ROM on Nexus 5 ?
Sources
- Mozilla source code
- my modifications and userconfig
GOOD ONE!!!!
If u can provide more details on the rom......thx
Thanks man! It's good to appreciated the progress with daily builds. I wonder when it gets stable for our handheld, this would be a cool alternative OS.
Cheers mate!
hello vosky , happy to see you here .
Addymore said:
GOOD ONE!!!!
If u can provide more details on the rom......thx
Click to expand...
Click to collapse
I added some details.
Please tell me if you want me to add other informations.
Hi @philipped346 !
Thanks! I'm using MultiROM, which version should I download: recovery or fastboot?
Hello, recovery .
Sent from my Nexus 5 using XDA Free mobile app
WARNING! I'VE TRIED TO FLASH THIS TWICE, a older build and one of the latest. Both times it completely erased EVERYTHING on my phone. I downloaded one one for recovery, wiped system, data, cache and flashed. It times out with unknown something than EVERY partition has to be formatted to a different format then back to EXT4 for me to be able to flash anything else.. maybe it's just my bad luck but are there any steps besides wiping and flashing? (Make a backup of everything first people)
NolenUmar said:
WARNING! I'VE TRIED TO FLASH THIS TWICE, a older build and one of the latest. Both times it completely erased EVERYTHING on my phone. I downloaded one one for recovery, wiped system, data, cache and flashed. It times out with unknown something than EVERY partition has to be formatted to a different format then back to EXT4 for me to be able to flash anything else.. maybe it's just my bad luck but are there any steps besides wiping and flashing? (Make a backup of everything first people)
Click to expand...
Click to collapse
I totally agree this should not be flashed it also whipped std card.
Sent from my Nexus 5 using xda premium
i have tested v 2.1 now recovery with multirom and work perfect , camera is always hs
philipped346 said:
i have tested v 2.1 now recovery with multirom and work perfect , camera is always hs
Click to expand...
Click to collapse
Thanks for your test.
I'll look for a patch to fix camera.
philipped346 said:
i have tested v 2.1 now recovery with multirom and work perfect , camera is always hs
Click to expand...
Click to collapse
What recovery do you have? I flashed through twrp 2.8.2.0
NolenUmar said:
What recovery do you have? I flashed through twrp 2.8.2.0
Click to expand...
Click to collapse
hello , i have twerp 2.8.1.0
philipped346 said:
hello , i have twerp 2.8.1.0
Click to expand...
Click to collapse
I forgot that multirom has its own version of twrp that's still on 2.8.1.0. I successfully installed as secondary ROM but had the exact same issues when trying to flash as primary.
NolenUmar said:
I forgot that multirom has its own version of twrp that's still on 2.8.1.0. I successfully installed as secondary ROM but had the exact same issues when trying to flash as primary.
Click to expand...
Click to collapse
I think it is beceause the .zip files are not signed.
If you want FFos as primary OS, you should flash it via fastboot.
Might be very nice of you to add something like "this isn't to be flashed via recovery like normal ROM unless using MULTIROOOOOOM" to OP now that you're aware, unless there's a way to sign these
Vosky said:
I think it is beceause the .zip files are not signed.
If you want FFos as primary OS, you should flash it via fastboot.
Click to expand...
Click to collapse
NolenUmar said:
Might be very nice of you to add something like "this isn't to be flashed via recovery like normal ROM unless using MULTIROOOOOOM" to OP now that you're aware, unless there's a way to sign these
Click to expand...
Click to collapse
Next builds will be signed. (after 2014-12-18)
updating nightlies and changelog
Is there away to update to the newest nightly build without deleting the previous version.
I am using multirom.
And is there a changelog somewhere for each nightly build?
ehoeve said:
Is there away to update to the newest nightly build without deleting the previous version.
I am using multirom.
And is there a changelog somewhere for each nightly build?
Click to expand...
Click to collapse
The only way I know to update without deleting the previous version is to flash FFos as primary rom and flash updates via recovery.
If you want daily changelog, you can read code commits : https://github.com/mozilla-b2g/gaia/commits/master
But it's not easy to understand.
Or you have global changelogs links in the first post.
How to intall?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the new Project Fi LVY48C 5.1.1 Stock ROM. The rom has simply been rooted and made flashable.
Rom Features
*Stock Android 5.1.1 Project Fi LVY48C base
*Rooted
*Busybox
*No force encrypt kernel
*Persistent ADB enabled
Flash instructions
*Download ROM from link below
*Backup current ROM
*Flash ROM using TWRP
*For best results clean wipe but may not be needed
Disclaimer
I am not responsible for any damage done to your device, either hardware or software. You use the ROM at your own risk. We will try to help resolve any issues you have, but we make no guarantees in doing so.
Download
Link removed, old rom no longer supported
MD5: 36aa79cce55db5dd306372d53411145d
Sharing policy
You are free to use this ROM as your base, you do not need to ask me for permission, but please give me credit for using the base.
Mods
Check out Post #2 for extra mods specific for this rom!
Mods
In this section I will add some use addons that you can flash on the base rom. Again these can be used in your ROM, but if you do, you must give me permission.
SuperSU in Settings
This mod will move the SuperSU icon from the app drawer into the settings menu.
Download
Modded Settings.zip
MD5: 352a0ade2366d37bd5a76ffe47fc5bbb
For Bootloader, Radio and Recovery updates see the following thread:
[FXZ][OTA] Nexus 6 Recovery Flashable Fastboot Files (Unlocked Bootloader Only)
Scroll down until you find LVY48C (5.1.1 Project Fi)
ROM is up enjoy!
What about boot loader and radio?
Sent from my Google Nexus 6
I'm luvin' it.
Downloading, so the VYZ28E boot loader and radio will work?
Sent from my Google Nexus 6
lcchan1 said:
What about boot loader and radio?
Sent from my Google Nexus 6
Click to expand...
Click to collapse
You can download them from here: [FXZ][OTA] Nexus 6 Recovery Flashable Fastboot Files (Unlocked Bootloader Only)
Thanks.
Sent from my Google Nexus 6
---------- Post added at 11:48 AM ---------- Previous post was at 11:34 AM ----------
lcchan1 said:
Thanks.
Looks like boot loader is the same, only the radio is difference.
Sent from my Google Nexus 6
Click to expand...
Click to collapse
Sent from my Google Nexus 6
Guys hold off on downloading for a bit. Looks like my upload has got corrupted. I am going to re-upload now.
Ok new ROM has been uploaded sorry about that!
Modded Settings Zip Download not working. Thanks
Nice. Thanks for this. I've been checking everyday for a stock rooted Fi build. Much appreciated sir.
Sent from my Nexus 6 using Tapatalk
Stephen said:
Ok new ROM has been uploaded sorry about that!
Click to expand...
Click to collapse
Thanks Stephen, appreciate your continued development!
hedgehogmd said:
Modded Settings Zip Download not working. Thanks
Click to expand...
Click to collapse
Me too
I am new to N6 for just two weeks and thanks for the flashable zip. I just want to know if my N6 is on LMY47Z, rooted and not encrypted with bootloader unlocked. What I need is just boot into TWRP recovery, wipe and flash the zip, that's it? Thanks!
tonyfung820 said:
I am new to N6 for just two weeks and thanks for the flashable zip. I just want to know if my N6 is on LMY47Z, rooted and not encrypted with bootloader unlocked. What I need is just boot into TWRP recovery, wipe and flash the zip, that's it? Thanks!
Click to expand...
Click to collapse
Yes. Well you can do more. Go here http://forum.xda-developers.com/nexus-6/development/fxz-nexus-6-recovery-flashable-fastboot-t3066052, go down to LVY48C (5.1.1 Project Fi), download the Radio only (02.102) Standard:**click the link** and flash that too. Doesn't matter which one you flash first.
hedgehogmd said:
Modded Settings Zip Download not working. Thanks
Click to expand...
Click to collapse
Just spotted that and fixed the link. It is available to download now.
tonyfung820 said:
I am new to N6 for just two weeks and thanks for the flashable zip. I just want to know if my N6 is on LMY47Z, rooted and not encrypted with bootloader unlocked. What I need is just boot into TWRP recovery, wipe and flash the zip, that's it? Thanks!
Click to expand...
Click to collapse
Yes thats fine, simply backup your current ROM in TWRP, then I would wipe and install the new ROM for best results, Try with out wiping first to see if it upgrades ok.
drkow19 said:
Yes. Well you can do more. Go here http://forum.xda-developers.com/nexus-6/development/fxz-nexus-6-recovery-flashable-fastboot-t3066052, go down to LVY48C (5.1.1 Project Fi), download the Radio only (02.102) Standard:**click the link** and flash that too. Doesn't matter which one you flash first.
Click to expand...
Click to collapse
I would recommend not flashing the stock recovery, but it would be a good idea to flash bootloader and radio as well.
Sorry for a potentially dumb question, but is this only for those using Fi? Or will it activate under att just fine?
Can I flash this stuff on a Sprint enabled Nexus 6? And still use the Sprint network.
fankuan19 said:
Sorry for a potentially dumb question, but is this only for those using Fi? Or will it activate under att just fine?
Click to expand...
Click to collapse
puertorecon said:
Can I flash this stuff on a Sprint enabled Nexus 6? And still use the Sprint network.
Click to expand...
Click to collapse
I assume so yes. I had been testing it on my international Nexus 6 and it connected with all my APN settings with out any issue. Just back up your current ROM first, before you flash., then you can simply restore backup if there are any issues.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS THREAD REPLACE BY : https://forum.xda-developers.com/ga...opment/rom-t3704521/post74502648#post74502648
COMPLETELY FIXED! NO MORE BOOTLOOP OR NO OS PROBLEM! (IF YOU RECIEVE NO OS ITS NO BIGGIE!! JUST FOLLOW POST 3! I VERIFIED THE ROM WORKS ON MY OWN S8 THIS TIME!! "TWRP THIS ZIP IS CORRUPT" FULLY FIXED (CAUSED BY ORIGINAL V3 CORRUPT DURING DOWNLOAD!!))
ROM SHOULD BE FIXED NOW! I PUSHED A UPDATE TO HOPEFULLY FIX ALL "NO OS" ISSUES!
IF PERSISTS AGAIN, TRY MY FIX AGAIN!! LAST UPDATE WAS NOT FLASHING SYSTEM.IMG PROPERLY!!
SAMSUNG OREO BETA 2 CUSTOM ROM BY IQBAL.SAREEM! ANDROID 8.0.0 OREO ! (FULL DEODEX) TWEAKS ADDED!
DOWNLOAD: VIEW MY RES 1 post
FEATURE:
LOCK SCREEN BOOTLOOP BUG WHEN SECURITY: FIXED!! NO ISSUES IN THIS ROM!!
ADAWAY INCLUDED IN ROM TWEAK
NOTE 8 STYLE ROM
ROOTED
FULL DEODEX
KERNEL TWEAKS IN ROM TWEAK
KNOX 0X0 STATUS just small software tweak (S-HEALTH REPAIR AND OTHER!!)
WORKING WITH DUAL SIM BOTH S8 AND S8+ (PLEASE EXYNOS ONLY!!)
THIS WILL NEED A WIPE TO WORK!! PLEASE BACKUP IF YOU WANT THIS!!
Working: everything :good:
QUALITY: HIGH
TO INSTALL :
erase internal storage + data + cache + system
reboot recovery
install iqbal oreo custom v3.zip using install in twrp and click on my file after finding it in twrp install menu
swipe to install
THEN install v4 addon of iqbal oreo custom
swipe to install that
turn off and turn on your mobile phone
:good::good::good:
credit to iqbal_sareem for creating this rom
ENJOY MAN
DOWNLOAD FIXED V3 (FLASH THIS ONE FIRST (BIG FILE)): https://www.mediafire.com/file/kuq9..._flashable_s8_s8+_COMPLETE_ROM-V3-Working.zip
DOWNLOAD V4 (ADDON TO V3) : https://www.mediafire.com/file/c7he6e78uwz3chj/iqbal_OREO_flashable_s8_s8+_V4_mandatory_addon.zip
YOU MUST flash v4 addon RIGHT after flashing v3!! before first boot! very important!
links again if above not work
https://www.mediafire.com/file/kuq9..._flashable_s8_s8+_COMPLETE_ROM-V3-Working.zip <<< complete rom working v3
https://www.mediafire.com/file/c7he6e78uwz3chj/iqbal_OREO_flashable_s8_s8+_V4_mandatory_addon.zip <<<<- v4
IMPORTANT FOR "NO OS INSTALLED TWRP MESSAGE (PEOPLE WITH THIS ISSUE):
HOW TO:
wipe internal + data + system + caches
flash oreo iqbal sareem custom in twrp using install
turn off and on your phone back into twrp
flash iqbal sareem custom again WITHOUT WIPING
turn off recovery and turn on phone normally and it will work fine!!
REMEMBER THIS IS ONLY FOR PEOPLE HAVING THIS ISSUE!! EVERYONE WITHOUT SKIP THIS POST PLEASE!!
res.. JUST IN case almost forgot reserved post haha would be sad if i need to add more later without my reserved posts.. :good:
don't work for me NO OS INSTALLED i tried ur method
khriiza said:
don't work for me NO OS INSTALLED i tried ur method
Click to expand...
Click to collapse
same here
same here
The OS not installed is the same issue myself and others were having with the other Oreo beta 2 ROM thread.
Try flashing the ROM, reboot into recovery again, and flash the ROM again straight away.
the phone did not turn on
efsanevii said:
the phone did not turn on
Click to expand...
Click to collapse
No OS installed fix <<--
In TWRP Terminal enter: echo SYSTEMLESS=true>>/data/.supersu
then flash SuperSU again or flash ROM again.
hochocnua said:
No OS installed fix <<--
In TWRP Terminal enter: echo SYSTEMLESS=true>>/data/.supersu
then flash SuperSU again or flash ROM again.
Click to expand...
Click to collapse
it was not bro
this rom is not deodexed ... then it's the same by @SoLdieR9312 with system.img extracted
Carotix said:
this rom is not deodexed ... then it's the same by @SoLdieR9312 with system.img extracted
Click to expand...
Click to collapse
Won't even boot with extracted system.img because symlinks and permissions are wrong
SoLdieR9312 said:
Won't even boot with extracted system.img because symlinks and permissions are wrong
Click to expand...
Click to collapse
then there are not permissions and the script is completely wrong
this thread should be closed
installation runs less then 10 sec, stuck at bootlogo, the original from @SoLdieR9312 works fine for me.
khriiza said:
don't work for me NO OS INSTALLED i tried ur method
Click to expand...
Click to collapse
beanbean50 said:
same here
Click to expand...
Click to collapse
joggi34 said:
same here
Click to expand...
Click to collapse
efsanevii said:
it was not bro
Click to expand...
Click to collapse
JasonMason said:
installation runs less then 10 sec, stuck at bootlogo, the original from @SoLdieR9312 works fine for me.
Click to expand...
Click to collapse
bros please check out V2 download link! all these issues should hopefully be fixed! if they still arent fixed i will remake the rom fully and edit the way the tweaks were added
i pushed a update to solve system.img not flashing good
for anyone continuing to have the no os issues please try the fix i provided in my reserved posts again. thanks for reading guys. if my rom still doesnt work i will remake it for you guys
JasonMason said:
installation runs less than 10 sec, stuck at bootlogo, the original from @SoLdieR9312 works fine for me.
Click to expand...
Click to collapse
the same with V2 bro.
TWEAKS ADDED=is a control ROM or something like that?
bro v2 bootlop :S
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OFFICIAL DOWNLOADS FOR SUZU:
https://twrp.me/sony/sonyxperiax.htmltwrp-3.x.x_x-x-suzu.img: Official TWRP image
DEVELOPMENT DOWNLOADS FOR SUZU:
Folder: https://sourceforge.net/projects/loire-development/files/twrp-recovery/suzu/twrp-3.x.x_x-x-YYYYMMDD-suzu.zip: Flashable unofficial TWRP to FOTAKerneltwrp-3.x.x_x-x-YYYYMMDD-suzu.img: Unofficial TWRP image
INSTALLATION
MANUALLY TO FOTAFastboot: Adapt the image name and install this way:fastboot flash recovery twrp-3.x.x_x-x-suzu.imgfastboot rebootFROM EXISTING RECOVERY
Enter to the current recovery
Install flashable TWRP
Reboot/Power off
HOW TO ENTER TO THE RECOVERY:
Power off your phone
Press Power and Vol- buttons at the same time until vibration
Wait for TWRP load
Sources:
TWRP device tree: https://github.com/TeamWin/android_device_sony_suzu/tree/android-9.0Kernel: https://github.com/Chippa-a/kernel-copyleft/tree/34.4.A.2.xxxThanks to the TWRP Team!
Backup-Restore function working fine so far, only issue I am seeing is phone is heating up pretty faster than before while backing up in compression mode.
Another minor thing is that earlier when entering recovery mode a purple light used to blink, now its missing.
Just saw this now and I'm really grateful. Big ups to you, man. Great work.
And I was afraid there would be no 3.2.1 for this device;
@Chippa_a makes it possible - intensified thanks! :highfive::good::good:
Thank you!!
I can't flash the zip because twrp does not give access to that part of the storage, weird.
fusk said:
I can't flash the zip because twrp does not give access to that part of the storage, weird.
Click to expand...
Click to collapse
Weird. Try using flash tool to fastboot the image if the flashable zip doesn't work for you.
Updated from TWRP, backup/restore works, no problems so far apart from it needs more than a minute till TWRP GUI appears after boot. Thanks for update.
Do you use the stock kernel? I installed the recovery built by oshmoun in the omnirom thread. It uses the aosp kernel. It starts faster, has a better sdcard naming and can flash oem images. Maybe you could try this kernel.
I use stock kernel (Pexorom 4.5) so this may be the reason for the delay.
I mean the kernel used with the recovery, not the rom kernel.
I_am_Blackford said:
Weird. Try using flash tool to fastboot the image if the flashable zip doesn't work for you.
Click to expand...
Click to collapse
This is what i did. Download img, place file on phone. Download twrp app, pick choose a file, browse to recovery.img, flash. Power off, boot to recovery = win.
Reboot to system, retry installing new update = great success.
mase76 said:
I mean the kernel used with the recovery, not the rom kernel.
Click to expand...
Click to collapse
Sorry, I didn't get it... kernels everywhere.
However, flashing with fastboot leads to the same delayed start. Strange.
privatim said:
Sorry, I didn't get it... kernels everywhere.
However, flashing with fastboot leads to the same delayed start. Strange.
Click to expand...
Click to collapse
I dont know if there is a connection, but i've tested the recovery with OmniROM 7.1.2, where display is not responding. It can be installed, shows 3.2.1, but display remains dead 4 touch.
Give this one a try:
https://forum.xda-developers.com/showpost.php?p=76440401&postcount=333
mase76 said:
Give this one a try:
https://forum.xda-developers.com/showpost.php?p=76440401&postcount=333
Click to expand...
Click to collapse
Same result, whether fastboot or flashtool, display is dead.
Certainly missed ODM LOIRE v12, v11 is installed.
Not really sure is the latest bootloader.
Does restoring a backup change the bootloader as well?
Edit: Solved: the answer is 'yes'.
3.2.1 does not work @7.1.2 restore because of outdated bootloader.
privatim said:
I use stock kernel (Pexorom 4.5) so this may be the reason for the delay.
Click to expand...
Click to collapse
Moved to XGEN ROM and now TWRP starts without delay. :good:
privatim said:
Moved to XGEN ROM and now TWRP starts without delay. :good:
Click to expand...
Click to collapse
What I do not understand, maybe bootloader or encryption, but why is 3.2.1 not backwards compatible on Suzu?
Is Omni 7.1.2 kernel (more I have not tried) or not current boot loader the reason?
Installed on last nougat internal storage 0 help
Inviato dal mio F5121 utilizzando Tapatalk
I'm glad that you finally managed to crack this damn decryption. I felt really bad with my broken promise of delivering the working build. I'm sorry, guys. @Chippa_a congratulations on your hard work
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sources:
OMNI TWRP repository
android_device_xiaomi_tiffany-twrp
Downloads（MEGA） :
TWRP-3.3.1-9_Tiffany-Mod-20191019
payload_dumper-win64
A1_Modem_V10.0.14.0.PDHMIXM
Instructions:
With this modded version of TWRP you can now install A1 roms into the 5X.
How to install A1 andorid 10 rom on 5x.
Steps:
Please back up the efs, persist, modem partition before the flash ROM
Flash TWRP
Download A1 Android10 ROM
To extract boot.img and system.img for A1 ROM[Use the payload_dumper tool to extract the image file]
Reboot to TWRP
Flash A1_Modem_V10.0.14.0.PDHMIXM.zip
Wipe cache,data,vendor,system
Reboot to TWRP
Flash A1 boot.img
Flash A1 system.img
Go to the Twrp terminal
Enter a1to5x10+
Success
How to install A1 andorid 9(pie)pie rom on 5x.
Steps:
Please back up the efs, persist, modem partition before the flash ROM
Flash TWRP
Download A1 Android pie ROM
To extract boot.img and system.img for A1 ROM[Use the payload_dumper tool to extract the image file]
Reboot to TWRP
Flash A1_Modem_V10.0.14.0.PDHMIXM.zip
Wipe cache,data,vendor,system
Reboot to TWRP
Flash A1 boot.img
Flash A1 system.img
Go to the Twrp terminal
Enter a1to5x
Success
In what roms does it works?
All A1 official Stock ROMs before November 2018,Support all custom ROMs of A1, including android 10.
Black screen?
Please update miui firmware to the latest.
No IMEI & No Signal
Please restore efs,modem,persist partition backup in TWRP.
Bootloop?
Please restore efs,modem,persist partition backup in TWRP.
Additional links:
Telegram channel
Contributors
Eytan,Aex12
Version Information
Status: Stable
Stable Release Date: 2019-10-19
Created 2019-12-17
Last Updated 2019-12-17[/QUOTE]
You are rock. Thanks man
Can I use it to install to install other custom ROMs? Like the Evolution X ROM?
Can install kernel from a1?
pectopa said:
Can install kernel from a1?
Click to expand...
Click to collapse
You can, you need to remove kernel model verification
robertb45 said:
Can I use it to install to install other custom ROMs? Like the Evolution X ROM?
Click to expand...
Click to collapse
yes
zixuanf said:
You can, you need to remove kernel model verification
Click to expand...
Click to collapse
How can i do this?
How do I revert back to Mi 5x MIUI? I flashed it normally but then I get no wifi and no signal. Thankfuly I was able to reinstall the Mi A1 rom and everything works, but I would still like to go back to MIUI. Can you help me do that?
Hi! First of all I wanted to thank you for your work, I managed to install latest Mi A1 PE without any problem and perfectly running!
Second, is there any way to update the software without clean flashing and repeating the whole procedure? Like idk, dirty flashing updated boot and system?
Anyway, thank you again!
pectopa said:
Can install kernel from a1?
Click to expand...
Click to collapse
No, you only can install Ported Kernel from A1 (Telegram).
Also, install Mi A1 Modem.img to solve sound problem.
Hi, how can I revert this process? I don't have the efs, modem and persist backup anymore.
Well I just bricked my phone
If i want to back to stock rom, do i just flash the stock rom via fastboot?