TCL MEME DA 3S or 3gs - Android Q&A, Help & Troubleshooting

Hello,
Excuse my English please
I hope I'm in the right section, I think my problem may be of a general nature.
After an ota to my such android update I had a crash with inability to restart tel
I connected it to my pc and ofcourse it did not recognize the .after have changed PC, used all ports usb etc.. .the pc recognized finally 5 disc telling me that to continue should format the drives, I have stupidly done.
And disaster, such as planted, doesn't light even more, big galley.
Think you that there is a way to recover everything.
, I just wonder if when a such android is formatted, there is a way to re-inject the program indoors. Or if it is ****ed up...
Thank you for your answers

Related

upgrade rom sd card??

hi, i am new on this, this is my problem:
i upgraded the xda 2 from 2003se to wm2005. and now i cant syncronize whit activesync. There is a way to upgrade a rom via sd card?? please help me whit this
never heard about anybody managing it
but even if it will not sync with activesync it should be able to upgrade by bootloader
hi, every time i put it in bootloader mode an error display say that is not detecting the PPC. What i have to do??
no detection
Rene-357 said:
hi, every time i put it in bootloader mode an error display say that is not detecting the PPC. What i have to do??
Click to expand...
Click to collapse
i think your using an incorrect ROM or your using the incorrect phone/unit. this is for himalayas/ andes. i think youmay be using a rom for something else or your phone is something else. correct me if i'm wron seniors....
nope, im very sure that my phone is a hima, and the roms are for hima to. or O2 XDA II
hi, i have exactly the same problem for month, i didn't manage it by now, there mus be way, just keep asking and tell me when you get it
please can someone upload image of sd card prepared for flashing?
I have same problem, in nomal mode and bootloader mode my PC cant recognize my himalaya,
in Device manager my himalaya detected as UNKNOWN DEVICE,
i tried in several PC's but got the same problem,
nt : i use pcsync v 4.0 , 4.2 and 4.5 but
i think its an hardware-error,,
as i said before as far as i know nobody here ever managed to flash their himalaya from a sdcard
one reason it dont work with usb could be a bad cradle or connector
had plenty of those where i had to wiggle with them to get connection
here http://wiki.xda-developers.com/index.php?pagename=HimalayaBootloaderSdCardFlashing is "how to" flash hima from sd card, so it is possible, unfortunetly i cant connect via usb, so i cant prepare sd card. Btw i think it is clearly software problem in my case, i flashed some bad version (it was for hima), since then problems has releasing, my sms client break down, usb down, canot install corectly many programs, etc. So please, make someone image of prepared sd card, it will be usefull for many others, now my hima is nothing than brick
a sdcard reader is only about 10€ can that not be used?
no, command for backuping rom to sd card must be entered from terminal program from pc using usb
hi, i tried whit some pc,and is the same nothing works.its something whit the rom, because everything started in the upgrade. please someone help us!! if anyone get the sd image please reply here
ANYONE who have hima and right-working os on it can made os backup to sd. It is just three commands as i hope, minute of working, so help pls. Just get mtty (//http://wiki.xda-developers.com/uploads/mtty.exe), connect ppc to pc, and type these (http://wiki.xda-developers.com/index.php?pagename=HimalayaBootloaderSdCardFlashing) commands.
think here is absolutely clearly guide
http://wiki.xda-developers.com/index.php?pagename=BackupExistingRom
i cannot open by mtty, every time i try by mtty says that i cant open usb port. how i do that??????
you cant, same as me, it must be done by someone with working usb
i cant sync via bluetooth either
i found at ALPIN board very simple using sd-card methode,
http://forum.xda-developers.com/showthread.php?t=341564
maybe next time will able for xda-II that have error connection
yes, of course this method can be applyed for xdaII as well, but still, there is problem that noone is enought willing to do backup image that he don't need for his own reason.

[Q] MK808B don't boot

Hi
I have a problem with my google tv , MK808B
It doesn't boot
I have black screen after "android"
It seem to be a real one, not a fake, I open it and see it on another site, with pictures from the real and the fake
I try to flash another firmware, but I can't put it in flash mode, when I press reste button and connect to usb from otg to my pc, my pc doesn't detect mk800b
I try on differents pc
Sorry for my english, I prefer try by myself, I think it is better than google tradcution (perhaps not ?)
Up
Hi there, I got that problem as well when I first got it. Mine just stucks at the "android" logo screen forever. I panic and look up online. Apparently if you be able to flash different rom then the stock one, it should work fine like in my case. First connect your device to the computer under flash mode. So when you download the firmware zip file, unzip and you file the driver for your device "\Rockchip_Batch_Tool_v1.5\Rockchip_Batch_Tool_v1.5\RockusbDrive" it will depend on your computer to be 32 or 64bit to choose the right driver. Next go to your device manager, scan one more time for new device and update the driver from the directory above. If you install the driver properly the computer will recognize your device with no hiccup. Hope this help cause I solve my problem through this step as well.
Old threat but......
There is something around google with the nandchip pin 8 & 9. I rote something after search for mk808b firmware. Sorry for the bad help.
Kis Plus Ersatzhandy

[Q] Problem with USB connecting

Hi everyone, I've been having some serious problems with the usb connection of my samsung galaxy fame (GT-S6810L)
1) I intended to root the phone, but the adb console wouldnt recognise the phone
2) I intended to flash a new rom from odin and maybe root later ... but odin didnt recognise it neither
3) Finallly, I gave up and said to myself "**** it, im sticking with this rom, with my tablet i dont need gaming, so i dont need rooting ...". But when I went to load some music into the phone .... oh yes, the computer didnt recognise the mass usb storage system !
I tried with 3 different cables, all usb ports and A LOT of drivers (official and unnoficial) i found out there ... i also tried the generic ones i used to root my chinese tablet thorugh ADB, but no luck. I havent tried Kies because my pc is a piece of s$%& and it could possibly explode
I think the problem would be in the drivers, because i tried plugin in another phone (samsung galaxy Y pro, GT-B5510L) and the pc didnt recognise it as well
The worst of all is that when I plug the phone into my pc, it recognises that im pluging in something, but I cant work on it
This is what I get:
(i cant post the links of the pictures, but the hardware manager shows a new menu that goes "Android Phone" with a submenu that goes "Samsung Android Interface")
I NEED help, please ............. I might throw this piece of crap in any moment
Thanks in advance
PD: i have winXP 32bit
Answer
Lucho505 said:
Hi everyone, I've been having some serious problems with the usb connection of my samsung galaxy fame (GT-S6810L)
1) I intended to root the phone, but the adb console wouldnt recognise the phone
2) I intended to flash a new rom from odin and maybe root later ... but odin didnt recognise it neither
3) Finallly, I gave up and said to myself "**** it, im sticking with this rom, with my tablet i dont need gaming, so i dont need rooting ...". But when I went to load some music into the phone .... oh yes, the computer didnt recognise the mass usb storage system !
I tried with 3 different cables, all usb ports and A LOT of drivers (official and unnoficial) i found out there ... i also tried the generic ones i used to root my chinese tablet thorugh ADB, but no luck. I havent tried Kies because my pc is a piece of s$%& and it could possibly explode
I think the problem would be in the drivers, because i tried plugin in another phone (samsung galaxy Y pro, GT-B5510L) and the pc didnt recognise it as well
The worst of all is that when I plug the phone into my pc, it recognises that im pluging in something, but I cant work on it
This is what I get:
(i cant post the links of the pictures, but the hardware manager shows a new menu that goes "Android Phone" with a submenu that goes "Samsung Android Interface")
I NEED help, please ............. I might throw this piece of crap in any moment
Thanks in advance
PD: i have winXP 32bit
Click to expand...
Click to collapse
Did you select the option of USB Debugging mode enabled when connecting to ADB??
If you didn't, then try connecting by enabling that.
As you said no other samsung devices are connecting, then you surely install driver softwares.
Here's the link to the Samsung USB Driver: http://forum.xda-developers.com/showthread.php?t=961956
If you have installed Samsung Kies, disable it first and then try to connect it in Odin or ADB!!
Press thanks if I have helped you.
Yes, i turned on USB debbuging (i rooted my tablet through ADB). I turned it back off when i tried to use mass storage, as well as double checked if the usb thetering was oof (it was)
Ive never installed kies because my pc is pretty crappy (not even 1gb ram)
Ill give that driver a try and let you know, thank you !
EDIT -------------
Those were the drivers !! I love you man !

Wisky 3G068i 9,7" w8.1bing->w10 fail. Error message, cannot continue. unusable.Urgent

Wisky 3G068i 9,7" w8.1bing->w10 fail. Error message, cannot continue. unusable.Urgent
Hey,
I got Wisky 3G068i 9,7" w8.1bing tablet yesterday.
It was reset to factory settings. After getting things going, it worked fine with win8.1 and updated itself. Then asked do I want to update to win 10 and after reading and ppl saying its better(and i dont really like win 8) I updated it throught windows own update screen.
After night of installing it, it was stuck on 95% (took hellish long time) and had error message on it "please install extrenal removable media and press ok" (its in finnish so translation might not be correct but you get the point)
I tried clicking yes, no affect. Then removed card, put it back in and it started to revert itself back to win 8.1 after saying not enough room or some error(cant remember correct anymore).
It reverted approx 8 hours then that error came again and now its stuck on it, it wont do anything.
I tried to create win10 install to micro SD with win10 media creation tool but it wont boot from it. It boots up, wisky logo is seen and then rolls loading dot for while, then flashes some screen like command screen, very fast, I cant read what its doing and the error is back.
What can I do? there must be some way to get to reinstall of windows 8.1bing or win10 but how? I dont know does tablets have bios or how to get to it, or how do even get it to boot up some install media.
Been googling another 8 hour but i just cannot find anything that would help my situation.
How can I force it to boot from microSD or do I need to get some microusb-female usb adapter for usb stick? I have a USB hub and throught it i was able to install the win10 installation to usb stick and microsd but idk does the tablet understand that hub(and read from it the usb stick)
i have years of experience with pc's but with tablets i dont really have any.
Tablet has 3 puttons: power on/off and volume up/down
Since I dont have manual, i dont know how to do any resets on it or anything and seller did not have one and maker is chinese and hasnt answered me.
I found old posts on internet saying ppl did get the win10 to install but none posted how they did it.
tablet has:
2gb ram
16gb harddrive
microSD port where I have 64Gb brand new Kingston class10(it works even it says on specs 32gb is biggest)
3.5mm port and micro HDMI port.
Please any help is useful and Im forever gracious to whomever can help me fix it! heck i even buy you a beer if possible

"Bricked Phone??" UMI - London

hey all,
So i have an android phone, Umi London.
my father destroyed it... deleted rverytrhing....
the phone wont power on..
with charger, without charger, i changed the battery nothing.
tried to use hard reset, soft reset... nothing..
but when i plug it in the computer and no responded from the phone... But the computer is making noise that something is plugged-in..
i cant find nothing.. on the device manager... but it making a sound of something connected.. and after 1-2 minute it disconnect..
and then repeat....
i also tried to see if maybe ADB will recognize him... (adb devices) but no luck.
So. if there is a solution.. only you guys can help me.
plz help.
im using windows 10, and all the drivers are updated (used it to change firmware and os for OnePlus1 ).
thank you in advanced..

Categories

Resources