Hello guys, i tried to root my S6 edge 5.1.1 but i got trouble .
I found a tutorial and i did this things :
1: enter download mode
2: use odin to run twrp_5.1.1_edge.tar as AP.
After that i got and error on the screen : An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software.
I tryed to use it but it doesnt recognize the phone..
I tryed to reboot it (Vol down + Power + middle button) and it reboot again in donwload mode with that message on it.
Any one got any solution please?
Use odin to flash stock firmware. Will work after that. Had same problem with mine
Related
It is a Samsung Galaxy Mini (GT S5570) , the mobile of my girlfriend, she say she didn't install anything and it suddenly stop working
Now, when start , it apears the samsung screen, and then the galaxy-mini screen, and then it stuck in the samsung loading screen
I presume something on the software got corrupted or similar, so i wish to make a factory reset
VolumenDown + keyOK + Power -> send me to Downloading mode, but nothing goes on
VolumenDown + Power -> do not do a thing ...
can I do something with the phone, or should think into the next phone ??
InTheater said:
It is a Samsung Galaxy Mini (GT S5570) , the mobile of my girlfriend, she say she didn't install anything and it suddenly stop working
Now, when start , it apears the samsung screen, and then the galaxy-mini screen, and then it stuck in the samsung loading screen
I presume something on the software got corrupted or similar, so i wish to make a factory reset
VolumenDown + keyOK + Power -> send me to Downloading mode, but nothing goes on
VolumenDown + Power -> do not do a thing ...
can I do something with the phone, or should think into the next phone ??
Click to expand...
Click to collapse
When you enter download mode do you have your phone connected to your computer through a USB cable and is Odin detecting your phone? If you are able to access download mode you can download the stock firmware for the Galaxy Mini from here and then using Odin which can be downloaded from here, flash the firmware to the device. Let me know if you still have questions .
shimp208 said:
When you enter download mode do you have your phone connected to your computer through a USB cable and is Odin detecting your phone? If you are able to access download mode you can download the stock firmware for the Galaxy Mini from here and then using Odin which can be downloaded from here, flash the firmware to the device. Let me know if you still have questions .
Click to expand...
Click to collapse
Thanks a lot for the response !!!
I download drivers, Odin, and tar.md5 file, great...
but I start Odin with the package I get the "an unnamed file was not found" error, I search and I found that XDA_Galaxy_mini_OPS
Then I add it and it went everything well
Mobile is up and running again, and even I didn't loose all configurations and programs, GREAT !!!
Thanks again !!
Hello, today I tried root my Samsung Galaxy Win Duos (Grand Quattro), but I'm with some problems.
First of all, here's my device info:
Model
GT-I8552B
Version
4.1.2 (Android)
I'd downloaded the files to do the root, such like Odin3 and the CWM. I go to Download Mode and connect on Odin, start, all works perfect. But when it terminates, I see a message in my device:
Code:
SECURE : Signature verification failed
After it, I continue following the tutorial, I retire the battery and enter in the Recovery Mode. But the screen stay black, all I can do is press Home + Power to the phone reboot. After it, he turn on and works normally, without evidence of root.
I already tried it maybe 4 times with differents .tar or .md5, but never works. If I enter the Recovery Mode after all that, it works, but is the normal Recovery Mode. I go to "apply update from SDCARD" and when I enter, the system give me a error:
Code:
E:unknown volume for path [/sdcard]
If you don't understand, read again, please, I'm training my english and I didn't used the Google Translate this time (yay!).
So, how to proceed?
Well, I solved my problem using the Framaroot (Gandalf as exploit) to root the device.
what is your firwmware version ?
Hi, I have S6 Edge (SM-G925I). I have mistakenly bricked my device. It is running on Android 5.1.1. I tried rooting my device with CF-Auto Root. and since then i had this error on on the top left corner of my boot screen it is written in red and it says "Recovery is not seanandroid enforcing". i was really annoyed by this and tried to get back to my Stock ROM via Smart Switch. Unfortunately it failed. since then i am not able to enter recovery mode. Every time I try by pressing the 3 buttons, it shows up on a Cyan screen with this written "An error has occurred while updating the device software. Use emergency recovery function in the smart switch pc software". following that whenever i run Smart Switch it says that my device is not supported. I went through many sites over the internet however none solved my problems. i'm desperate for help. Please help me
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
Did you try following this thread?
I want to my current rom G9650ZHU3ARK1 flash into G9650ZCU3ARK1 , lots of tutorials in the internet said that I don't have to turn off the OEM lock. I think that is because I didn't turn off it. I use odin 1.13.1 and ADB is installed, and after odin started progress, it shows me failed .
Then I have to reboot my phone, but there's a warning "An error has occurred while updating the device software. Use the Emergency recover function in the Smart Switch PC software."
I tried Smart Switch but no device shows in the emergency software recovery option .
And now my phone can't even shutdown, or can't enter downloading mode anymore. or recovery mode ( volume up + bixby + power ) , the only thing that it can do is reboot into error interface.
I don't know how to recover my phone, anyone can help me? please.
hey, same issue here, do u fix it?
if yes, can u tell me how can i enter download mode? i`m stuck in "an error..." screen, cant enter download mode :C
an error has occured while updating the device software use the emergency recovery function in the smart switch PC sofware. OK so i was doing a frp unlock i flashed the combination for factory binary everything went well. Then i put it in debug mode and then put it in download mode so i started to flash 8.0.0 from sammobile.Yes i flashed my right one. It got through like half way then the BIG FAIL ugggggggg now my s8 wont do anything but go into the blue screen that says, an error has occured while updating the device software use the emergency recovery function in the smart switch PC sofware. nothing worked hard reset. When i try to put it in download mode it goes to the download screen but when i press the volume up for download it goes to the error an error has occured while updating the device software use the emergency recovery function in the smart switch PC sofware. smart switch s8 is not supported. Any help would be greatly APPRECIATED