I've bumped TWRP F400 Variants compatible with Aroma Installer.
Download TWRP: https://drive.google.com/file/d/0B4FoLWZ0e4kmbTZYcWxBYXM2WTA/view
- Instruction to use: Go to Google Play to install Flashify. Use Flashify to install TWRP.
Second method:
TO F400 VARIANTS USER: If flash twrp with flashify have a issue on boot. Please, change flash twrp with adb commands like that:
Preparetion:
- The device has root access.
- Enabled usb debugging.
- Download TWRP original: https://twrp.me/Devices. Type f400k in search frame & download it.
- Change name downloaded file to recovery.img
** Tool to bump twrp: Choose match for your windows.
- Windows 32bit: https://drive.google.com/file/d/0B4FoLWZ0e4kmVlNfNVNYcUg1MWc/view
- Windows 64bit: https://drive.google.com/file/d/0B4FoLWZ0e4kmVlNfNVNYcUg1MWc/view
** Instrution to bump twrp:
- Extract tool bump to desktop.
- Drag & drop recovery.img to bump.exe (bump.exe is a tool bump twrp & in it folder same name)
- Look below picture to see how to do it
- After bumped file. change name recovery.img again & copy to internal storage.
And now, use adb command to install twrp:
1. Connect your device with pc. Make sure installed LG driver before.
2. adb shell --> enter
3. su --> enter
4. dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/recovery --> enter
5. dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery --> enter
6. exit --> enter
7. exit --> enter
8. adb reboot recovery --> enter (your device will boot into twrp)
Like nhé...
Gửi từ LGLS990 của tôi bằng cách sử dụng Tapatalk
Has anyone with f400k flashed this?
Is it possible that a new version of TWRP would enable us to access recovery via key presses or is that something else?
Thanks!
daveaus said:
Has anyone with f400k flashed this?
Is it possible that a new version of TWRP would enable us to access recovery via key presses or is that something else?
Thanks!
Click to expand...
Click to collapse
You can easily access twrp with hard buttons or quick reboot app.
Sent from my LG-F400S using Tapatalk
chuyennho184 said:
You can easily access twrp with hard buttons or quick reboot app.
Sent from my LG-F400S using Tapatalk
Click to expand...
Click to collapse
No button combination works on the f400k. We are forced to use a app which means if the device can't boot we can't get into recovery.
daveaus said:
No button combination works on the f400k. We are forced to use a app which means if the device can't boot we can't get into recovery.
Click to expand...
Click to collapse
I've tested on my device before make a thread. You should to try several times to access twrp with hard buttons. I alway to boot into twrp via hard buttons to test rom.
Sent from my LG-F400S using Tapatalk
chuyennho184 said:
I've tested on my device before make a thread. You should to try several times to access twrp with hard buttons. I alway to boot into twrp via hard buttons to test rom.
Sent from my LG-F400S using Tapatalk
Click to expand...
Click to collapse
Do you have f400k? It is different to the F400S
Which buttons are you pressing. Thanks!
daveaus said:
Do you have f400k? It is different to the F400S
Which buttons are you pressing. Thanks!
Click to expand...
Click to collapse
Twrp v3 is use for f400 variants. Access twrp by hard buttons is the same for f400 variants.
Hold volumn "-" + power. When you see LG logo, release 2 these buttons, press volumn "-" + volumn "+". You device will going to factory reset. Choose yes 2 times to enter twrp.
Sent from my LG-F400S using Tapatalk
@chuyennho184 thank you for making this worked on our f400. the official version gives me error. (F400L)
all f400 variants can access recovery via hard buttons as the op stated. ( just to clarify things)
volume down +power when you see the LG logo immidiately released both then as fast as you can press volume down + up make sure you are pressing borh button on the edge ( away from power button) then follow the op's instructions.
@chuyennho184
I have successfully flashed 3 roms already including fulmics 3.5 & restored couple of back ups to test this. & its working. But with these 3 roms. I cant get my phone to reboot. If I press reboot on the power menu the phone turns off & I have to pull the battery out to turn it on again. Can you confirm this? Is this a twrp bug? Never encountered this on twrp 2.8.6
noypitoits said:
@chuyennho184 thank you for making this worked on our f400. the official version gives me error. (F400L)
all f400 variants can access recovery via hard buttons as the op stated. ( just to clarify things)
volume down +power when you see the LG logo immidiately released both then as fast as you can press volume down + up make sure you are pressing borh button on the edge ( away from power button) then follow the op's instructions.
Click to expand...
Click to collapse
This button combo doesn't work on the f400k.
See here: http://forum.xda-developers.com/lg-g3/help/boot-to-recovery-t2964143/post65227472#post65227472
noypitoits said:
@chuyennho184 thank you for making this worked on our f400. the official version gives me error. (F400L)
all f400 variants can access recovery via hard buttons as the op stated. ( just to clarify things)
volume down +power when you see the LG logo immidiately released both then as fast as you can press volume down + up make sure you are pressing borh button on the edge ( away from power button) then follow the op's instructions.
@chuyennho184
I have successfully flashed 3 roms already including fulmics 3.5 & restored couple of back ups to test this. & its working. But with these 3 roms. I cant get my phone to reboot. If I press reboot on the power menu the phone turns off & I have to pull the battery out to turn it on again. Can you confirm this? Is this a twrp bug? Never encountered this on twrp 2.8.6
Click to expand...
Click to collapse
On twrp 2.8.7.0, I have still same issue.
Sent from my LG-F400S using Tapatalk
daveaus said:
This button combo doesn't work on the f400k.
See here: http://forum.xda-developers.com/lg-g3/help/boot-to-recovery-t2964143/post65227472#post65227472
Click to expand...
Click to collapse
If this button combo works for F400s & F400L but not on F400k sorry bro I have nothing to say thats all I know.
@chuyennho184
I'm using f400k MM stock rom (30d).
I have rooted temporary by using kingroot and flash your recovery via flashify.
But when I try to reboot to recovery, it shows
========================
Boot verification Failed
-cause MISMATCH_SIG_LEN
========================
Is there anything that I am missing?
Thanks for your reply.
I am getting the same error on boot,boot verification failed.
Sent from my LG-F400K using Tapatalk
---------- Post added at 01:14 PM ---------- Previous post was at 01:14 PM ----------
vineet381 said:
I am getting the same error on boot,boot verification failed.
Sent from my LG-F400K using Tapatalk
Click to expand...
Click to collapse
Currently on twrp 2.8.7
Sent from my LG-F400K using Tapatalk
teokjisoo said:
@chuyennho184
I'm using f400k MM stock rom (30d).
I have rooted temporary by using kingroot and flash your recovery via flashify.
But when I try to reboot to recovery, it shows
========================
Boot verification Failed
-cause MISMATCH_SIG_LEN
========================
Is there anything that I am missing?
Thanks for your reply.
Click to expand...
Click to collapse
I think your device lose root access when reboot with kingroot.
vineet381 said:
I am getting the same error on boot,boot verification failed.
Sent from my LG-F400K using Tapatalk
---------- Post added at 01:14 PM ---------- Previous post was at 01:14 PM ----------
Currently on twrp 2.8.7
Sent from my LG-F400K using Tapatalk
Click to expand...
Click to collapse
It's weird while F400S & F400L can easily access TWRP successfully. Only F400K have issue.
TO F400K USER: If flash twrp with flashify have a issue on boot. Please, change flash twrp with adb commands like that:
Preparetion:
- The device has root access.
- Enabled usb debugging.
- Download TWRP original: https://twrp.me/Devices. Type f400k in search frame & download it.
- Change name downloaded file to recovery.img
** Tool to bump twrp: Choose match for your windows.
- Windows 32bit: https://drive.google.com/file/d/0B4FoLWZ0e4kmVlNfNVNYcUg1MWc/view
- Windows 64bit: https://drive.google.com/file/d/0B4FoLWZ0e4kmVlNfNVNYcUg1MWc/view
** Instrution to bump twrp:
- Extract tool bump to desktop.
- Drag & drop recovery.img to bump.exe (bump.exe is a tool bump twrp & in it folder same name)
- Look below picture to see how to do it
- After bumped file. change name recovery.img again & copy to internal storage.
And now, use adb command to install twrp:
1. Connect your device with pc. Make sure installed LG driver before.
2. adb shell --> enter
3. su --> enter
4. dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/recovery --> enter
5. dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery --> enter
6. exit --> enter
7. exit --> enter
8. adb reboot recovery --> enter (your device will boot into twrp)
@vineet381 & @teokjisoo: Use adb command to install twrp v3. Look above my post.
how to use
how to use this on a unrooter LG F400S (with stock romV30C)
helijia21 said:
how to use this on a unrooter LG F400S (with stock romV30C)
Click to expand...
Click to collapse
Read my instruction to install twrp.
Related
How to Root Galaxy Note 7
First of all big big thanks to @Chainfire for making this possible and effort he took to made this without own device.
Right now no multiple methods are available so writing here simple easiest method available to root Note7.
1. You will require TWRP (ignore if you already have it)
How to Flash TWRP ?
- Download Odin 3.12.3 or higher
- Next you required id TWRP recovery. If you already have one then skip this, otherwise download TWRP for your device and flash using Odin. In case Odin Fail during flash, reboot to recovery - wipe cache and try again. Here is original thread for TWRP support.
- Download Latest SuperSu 2.77 OR Newer if any available from this original thread.
- Copy SuperSu zip you have downloaded to SD card OR USB OTG drive
- Now Flashing TWRP
Open Odin - Select TWRP tar file you have downloaded above with AP tab of odin. Reboot tour device to download mode. (Switch Off device - Vol down + Power + Home - keep pressing till you show download mode screen pre message. - Press volume up when asked to continue) Now you will see downloading screen.
Connect device - Go to Option menu of Odin - Uncheck Auto reboot and keep rest of options as it is.
Now Flash (Start)
When Odin display message about flashing finished (Passed) - Disconnect the device and ling press Vol down + Power
As soon as display turns off, Press Vol Up + Power + Home.
This will boot your device to recovery and you will have TWRP instaed of stock recovery.
IMPORTANT : In case Odin say Fail while flashing TWRP, DON'T BE PANIC but simply reboot to recovery and clear cache and repeat procedure.
Select - Install then - Select Storage - here select according you have copied your SuperSu zip depending on Sd card or USB
Navigate to Supersu zip and select to flash (swipe to right)
Keep patience for few minute and reboot device (to system) when flashing done
Check Supersu app in drwaer.
Your device should have root access now.
Once you have root access DON'T FORGET TO MAKE EFS BACKUP EFS Backup Thread.
reserved
Reserved
Closing thread now and will be up when ready
Awesome work Doc!
Will this work on Tmobile?
Thank you very much
Sent from my SM-N930F using Tapatalk
Should specify which models your method is for. This way could potentially make paper weights out of North American models! This method and recovery is for Exynos processors only!
Process should remain same ( Provided your BL isn't locked) but just you need recovery for your device.
I have edited OP and linked to general page of TWRP download instead of F/FD
has anyone confirmed this working on the 930fd model??
eyesofice said:
has anyone confirmed this working on the 930fd model??
Click to expand...
Click to collapse
Don't worry mine have N930FD only
dr.ketan said:
Don't worry mine have N930FD only
Click to expand...
Click to collapse
So you were able to root your 930FD with this method?
This of course trips Knox and invalidates warranty?
Sent from my Nexus 6P using Tapatalk
Dr.Ketan, really appreciate for your details explain for getting root, this will be the first time I did it by myself with following your instructions step by step, my 930FD just rooted and keep testing if there is any problem for it.
Same usual question. Will this trip the KNOX?
iom_jack said:
Same usual question. Will this trip the KNOX?
Click to expand...
Click to collapse
Obviously.
It's kind of funny how the SD model can be rooted and keep its warranty. But the Version with the Unlocked BL wiil be void when rooted. Wish we could just combine both.
Batfink33 said:
This of course trips Knox and invalidates warranty?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Naturally
Sent from my SM-N930F using Tapatalk
anyway to root using a Mac?
skirocket said:
anyway to root using a Mac?
Click to expand...
Click to collapse
Same thing -.-
Does this work on N930X?
Hey guys,
I'm still running the stock EUI ROM and getting pretty sick of it.
I've looked at getting my bootloader unlocked and installing TWRP but it seems pretty complicated for this device and what information I could find didn't work for me.
Can anyone show me some noob friendly guides on getting this done?
Much appreciated!
What?!? I never had a phone which bootloader unlocks easier than in Le Max 2. You have a special switch for that i developer options. That's all. Next you have to restart your phone in bootloader mode and flash desired recovery using fastboot commands.
Qron said:
What?!? I never had a phone which bootloader unlocks easier than in Le Max 2. You have a special switch for that i developer options. That's all. Next you have to restart your phone in bootloader mode and flash desired recovery using fastboot commands.
Click to expand...
Click to collapse
Wow, I didn't know that's how you unlock the bootloader. Sorry like I said I'm not very familiar with this device yet. Thanks!
As far as using fastbood commands I tried that but the drivers didn't seem to work on my PC. I couldn't get any of that to work. But I'll keep trying.
If you have anything like Samsung Kies or HTC Sync, etc. installed on your PC, you might try to remove it and reinstall drivers using "15 seconds ADB installed".
i just posted this yesterday,. i guess i could have chosen a better title... do you have any suggestions?? (maybe "full guide: adb, fastboot, twrp recovery, backup, flashing"?????)
http://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
@thielek what windows do you have? I can suggest something if you have win7, for win10 you can find a guide in some other threads.
Qron said:
If you have anything like Samsung Kies or HTC Sync, etc. installed on your PC, you might try to remove it and reinstall drivers using "15 seconds ADB installed".
Click to expand...
Click to collapse
I had a Nexus 5 I was using on this PC I'll try removing all those drivers. Thanks.
valy_cta said:
@thielek what windows do you have? I can suggest something if you have win7, for win10 you can find a guide in some other threads.
Click to expand...
Click to collapse
Windows 10 here. Does that make it more difficult?
greenManGaming said:
i just posted this yesterday,. i guess i could have chosen a better title... do you have any suggestions?? (maybe "full guide: adb, fastboot, twrp recovery, backup, flashing"?????)
http://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
Click to expand...
Click to collapse
Hey, this looks really good!
Thanks I will definitely give it a read and try to get this sorted. I'm pumped to get that CM 14.1 ROM when it gets a few more of the bugs sorted.
thielek said:
Windows 10 here. Does that make it more difficult?
Click to expand...
Click to collapse
No, actually you need to disable the signature verification if I recall it right. I can't find the thread for win10 driver installation right now but for sure I have seen it on xda for LeMax2
Here is the tuturial for noobs (I was noob too and I wrote it for people like me):
Here is the quick tutorial for users like me:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
If you want change to China 21s with SuperSU, you just have to:
1. Turn off your phone
2. Press VolumeUp + Power button - it's gonna boot you to TWRP
3. You can now upload the 21s.zip and SuperSU-v2.78...zip files to your phone from this thread: http://forum.xda-developers.com/le-m...a-rom-t3492640
4. On your phone go to Whipe and whipe all data (swipe blue arrow)
5. Go to Install and choose 21s.zip and wait - when it ends it's gonna boot you to the system
6. Turn off your phone and again boot to Recovery (VolumeUp + Power button)
7. Choose Install and choose SuperSU.zip and there you are!
Now you're gonna have China 21s with root and SuperSu!
Emokah said:
Here is the tuturial for noobs (I was noob too and I wrote it for people like me):
Here is the quick tutorial for users like me:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
If you want change to China 21s with SuperSU, you just have to:
1. Turn off your phone
2. Press VolumeUp + Power button - it's gonna boot you to TWRP
3. You can now upload the 21s.zip and SuperSU-v2.78...zip files to your phone from this thread: http://forum.xda-developers.com/le-m...a-rom-t3492640
4. On your phone go to Whipe and whipe all data (swipe blue arrow)
5. Go to Install and choose 21s.zip and wait - when it ends it's gonna boot you to the system
6. Turn off your phone and again boot to Recovery (VolumeUp + Power button)
7. Choose Install and choose SuperSU.zip and there you are!
Now you're gonna have China 21s with root and SuperSu!
Click to expand...
Click to collapse
Wow! That fastboot program was amazingly simple. Thank you! How did I know find this before. The other guides are very long.
So that installed cuoco92's ROM as well as TWRP. Do you suggest using his ROM? That second link you provided in the next paragraph didn't work.
I was looking for a very clean and vanilla android like ROM. I hate EUI and am excited for that CM 14.1 build but it's not ready yet.
Thanks again very much!
thielek said:
Wow! That fastboot program was amazingly simple. Thank you! How did I know find this before. The other guides are very long.
So that installed cuoco92's ROM as well as TWRP. Do you suggest using his ROM? That second link you provided in the next paragraph didn't work.
I was looking for a very clean and vanilla android like ROM. I hate EUI and am excited for that CM 14.1 build but it's not ready yet.
Thanks again very much!
Click to expand...
Click to collapse
Maybe Madsurfer's 21s will be good for you. It's without chinese apps etc.
Emokah said:
Maybe Madsurfer's 21s will be good for you. It's without chinese apps etc.
Click to expand...
Click to collapse
Cool I'll check that out.
Any idea what the best CM ROM is right now?
If I backup after Ive flashed twrp & want to restore on Mokee rom?Im on stock eui 19s & also Can I flash rom placed on internal storage?Coz it's showing storage as encrypted
Emokah said:
Here is the tuturial for noobs (I was noob too and I wrote it for people like me):
Here is the quick tutorial for users like me:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
If you want change to China 21s with SuperSU, you just have to:
1. Turn off your phone
2. Press VolumeUp + Power button - it's gonna boot you to TWRP
3. You can now upload the 21s.zip and SuperSU-v2.78...zip files to your phone from this thread: http://forum.xda-developers.com/le-m...a-rom-t3492640
4. On your phone go to Whipe and whipe all data (swipe blue arrow)
5. Go to Install and choose 21s.zip and wait - when it ends it's gonna boot you to the system
6. Turn off your phone and again boot to Recovery (VolumeUp + Power button)
7. Choose Install and choose SuperSU.zip and there you are!
Now you're gonna have China 21s with root and SuperSu!
Click to expand...
Click to collapse
The process I am aware of is
1. Unlock bootloader
2. Install twrp (or any custom recovery) in fastboot mod
3. Flash SuperSu zip to get root access.
Can you please explain in your tutorial the first paragraph can do this? I just want these 3 thing to do mentioned above. Thanks.
manishsoni7689 said:
The process I am aware of is
1. Unlock bootloader
2. Install twrp (or any custom recovery) in fastboot mod
3. Flash SuperSu zip to get root access.
Can you please explain in your tutorial the first paragraph can do this? I just want these 3 thing to do mentioned above. Thanks.
Click to expand...
Click to collapse
This 5 steps:
1. Enable USB Debugging
2. Connect phone to the computer
3. Unzip this https://www.androidfilehost.com/?fid=529152257862669609 and run LE_X2_fastboot.exe
4. Wait until it say "Press any button to reboot phone" and just press random button
5. Your phone will boot into system
unlocks you Bootloader, installs TWRP and installs Cuoco92 with root and everything included.
You can install new ROM like 21s and just flash SuperSu zip to get it.
manishsoni7689 said:
The process I am aware of is
1. Unlock bootloader
2. Install twrp (or any custom recovery) in fastboot mod
3. Flash SuperSu zip to get root access.
Can you please explain in your tutorial the first paragraph can do this? I just want these 3 thing to do mentioned above. Thanks.
Click to expand...
Click to collapse
Hello I've successfully flashed mokee from,But Jio is not working only data is working.Cannot make or receive calls,Any solutions?
RISHI RAJ said:
Hello I've successfully flashed mokee from,But Jio is not working only data is working.Cannot make or receive calls,Any solutions?
Click to expand...
Click to collapse
Buddy, I am still finding proper steps to flash twrp, so I can't guide you on custom roms.
Can you please give the steps those you followed in order to install twrp. Thanks
manishsoni7689 said:
Buddy, I am still finding proper steps to flash twrp, so I can't guide you on custom roms.
Can you please give the steps those you followed in order to install twrp. Thanks
Click to expand...
Click to collapse
check 3 posts up
This is for Marshmallow B13. However, I can confirm that installing twrp using tenfars tool still works even on latest B17 nougat or B08 mifavor 5.
However, some users don't have luck with it.
I advise to check first on Axon Toolkit located here:
https://forum.xda-developers.com/axon-7/development/tool-axon7toolkit-t3573108
I made this guide for users who haven't unlocked and rooted their A2017 B13 chinese version.
After reading so many guides here from @tenfar, @DrakenFX, and many others, I finally unlocked bootloader, rooted, installed TWRP and Xposed.
I take no responsibility if anything happens to your phone while doing this process. Just follow every step stated here and hope you don't mess around. Please READ all the instructions here first before doing anything.
Backup all your important data before you do any steps below. This process will delete all contents of your phone except external sdcard.
Step 1: Download the zip file and extract all files to your local disk in one folder.
TWRP recovery 3.1.0-0
axon7root.zip
TWRP_UnlockBootloaderPackage_by_DrakenFX.zip do not extract this file.
Step 2: Enable USB debugging and OEM unlocking under Developer options. to show Developer options, go to Settings, About phone, tap Build Number 7x.
Step 3: Open Windows Explorer and browse to the folder where you extracted the files downloaded above. Press and hold SHIFT key then right click and choose Open Command Window here. type:
Code:
adb reboot edl
This will reboot the phone in edl mode where it's just black screen.
Step 4: Install the Qualcomm's driver .
Download Qualcomm driver to your local disk ,extract and install it
Qualcomm 9008 driver : http://d-h.st/35tx
in the install process choose WWAN, the first option.
Alternative: you could just also install the native drivers provided by the phone. If you have done step 2 already, just long press Power button for about 10seconds to reboot to its system. Once booted, connect your phone to your pc via usb and swipe down from the notification. Choose "install drivers" from the connect options. Open your Windows Explorer and find the new drive containing the driver. After installing, repeat step 3.
Step 5 : open your PC's device manager and find out the com port number which your phone is from COM ports & LPT tree.
Code:
Usage Example: axon7root.exe -p COM4 -b -r
Options:
-p Port number eg: COM8 or 8
-b write boot.img only
-r write recovery.img only
-d dump boot.img and recovery.img from phone(not impl yet)
Step 6: in the command window from step 3, type:
Code:
axon7backup.exe -p COM# -d
replace # with the number of your COM PORT.
This will save the backup files for you stock boot and recovery image.
Step 7: to install TWRP, type:
Code:
axon7root.exe -p COM# -r
Step 8: reboot to TWRP by holding POWER + UP buttons.
Optional:
Step 8a: Copy twrp-3.1.0-0-ailsa_ii.img to your sdcard/extsd. Update to latest TWRP. Install -> IMG (lower right button) -> choose twrp-3.1.0-0-ailsa_ii.img. (Don't reboot to system yet)
Step 8b: From the TWRP, find Reboot to recovery. verify that you have version 3.1.0-0 already.
Step 9: Copy TWRP_UnlockBootloaderPackage_by_DrakenFX.zip to your sdcard/extsd.
Step 10: Back-up and pull current fastboot image. Type:
Code:
adb shell dd if=/dev/block/bootdevice/by-name/fbop of=/sdcard/fbop_lock.img
adb pull /sdcard/fbop_lock.img
Step 11: Flash/Install TWRP_UnlockBootloaderPackage_by_DrakenFX.zip. (do not reboot yet)
Step 12: Type:
Code:
adb reboot bootloader
Step 13: Now let's Unlock the Bootloader. (THIS WILL WIPE DATA+INTERNAL STORAGE)
Type:
Code:
fastboot oem unlock
Confirm yes from your phone.
Step 14: You'll boot in TWRP. once there do the following:
Code:
* tap CANCEL
* tap WIPE
* tap FORMAT DATA and Follow the Instructions
Step 15: Once done, REBOOT system. Follow the setup wizard to gain access to your phone. enable USB debugging again.
Optional: To install root, Boot to recovery again and install/flash SUPERSU 2.79. download at UPDATE-SuperSU-v2.79-20161211114519.zip and copy to your sdcard.
To install Xposed (for MM only), flash xposed-v87-sdk23-arm64.zip and install the apk XposedInstaller_3.1.1.apk.
Do not REBOOT after installation of Supersu and Xposed. Instead, go to Terminal and type:
Code:
reboot disemmcwp
Credits to all the great minds here in xda for doing all their best.
UPDATE: TWRP flashable zips available. Credits to @parazite69 and the russians for these.
parazite69 said:
Hi just used from a russian website , Flashable b13 zip!
ZTE_A2017V1.0.0B13_BootStack_by_djkuz.zip https://mega.nz/#!AwpE3Lyb!vQuJlu6apdIrqdBqqgxEHsiKdy3Aje3vdqXJupa9A4s
CRC32: CEE662FD
MD5: 67635E2EEE51BFF0E3B6F73591BA88B8
SHA-1: DAC1646FD8B0349CF262C7FD4C15987D5F700304
ZTE_A2017V1.0.0B13_StockSystem_by_djkuz.zip https://mega.nz/#!gpJyGCiC!0CkXk0yj17HK-JTkvkM5JuKflqeeCugZQosmbGj9xPk
CRC32: 79D0419A
MD5: DDD785A98FD32144920970B6B6BE8089
SHA-1: C96EDFE8F414A0D6904DAB1ED8673591D8DE496B
I am using it and it works! I Have just updated the bootstack and then installed the ZAD rom, but if you like the stock just install them both!
Click to expand...
Click to collapse
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
danromania said:
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
Click to expand...
Click to collapse
I would like this as well.
danromania said:
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
Click to expand...
Click to collapse
BlazingBullets said:
I would like this as well.
Click to expand...
Click to collapse
I suggest do a full update to b13 using sdcard update first..
the file can be found on this thread.
https://forum.xda-developers.com/axon-7/development/axon-7-chinese-stock-roms-t3436817
When I got my phone, it was also on B11 rooted. but I upgraded it to B13 without problems.
otaconremo said:
I suggest do a full update to b13 using sdcard update first..
the file can be found on this thread.
https://forum.xda-developers.com/axon-7/development/axon-7-chinese-stock-roms-t3436817
When I got my phone, it was also on B11 rooted. but I upgraded it to B13 without problems.
Click to expand...
Click to collapse
doesn't work if you are unlocked or not using the stock recovery
BlazingBullets said:
doesn't work if you are unlocked or not using the stock recovery
Click to expand...
Click to collapse
I can confirm it's not working, root, unlocked and TWRP.
If somebody can compile B13 for TWRP will really help us.
Thanks!
You're right. You'll need stock recovery to do a full update though. I haven't backed up my B11 stock recovery but I do have the B13 stock boot and recovery. Message me if you want those files.
Sadly no one else wants to make a twrp update for B13. And I don't know how. I already asked from draken a couple of months ago but i think he has never got a time for it.
Can you help me,
I try to step by step but step 8
Went i push POWER + UP volume, i have a black screen, not TWRP, i can not do any thing
I would love to try this since I want to try installing a2017U nougat ora2017 G software instead Chinese stock but the link for axon7backup: http://d-h.st/Ienb is timing out and dead. I can't seem to get any twrp recoveries working with the other axon7tool method https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254 and also the signed twrp is gone. I need a working recovery the files from here. Will try reinstalling b10 and then try find b11 for the current recoveries to see if any work instead of giving me a black recovery screen.
Hello was wondering about the terminal reboot portion. I've been rooted with SU for a few days now can I just flash Xposed and install the apk without the worry of using terminal? Thanks
Sent from my ZTE A2017U using XDA-Developers Legacy app
thanhtri87 said:
Can you help me,
I try to step by step but step 8
Went i push POWER + UP volume, i have a black screen, not TWRP, i can not do any thing
Click to expand...
Click to collapse
try pressing just the power and Up buttons until it reboots and release when you see the ZTE logo. that should enter you into recovery.
yvgamer94 said:
I would love to try this since I want to try installing a2017U nougat ora2017 G software instead Chinese stock but the link for axon7backup: http://d-h.st/Ienb is timing out and dead. I can't seem to get any twrp recoveries working with the other axon7tool method https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254 and also the signed twrp is gone. I need a working recovery the files from here. Will try reinstalling b10 and then try find b11 for the current recoveries to see if any work instead of giving me a black recovery screen.
Click to expand...
Click to collapse
the links were up okay as I opened them now. you may want to disable your antivirus too since this will trigger it false positive.
also, all the files I used were posted in the links i posted. credits to the owners btw.
HTC55555 said:
Hello was wondering about the terminal reboot portion. I've been rooted with SU for a few days now can I just flash Xposed and install the apk without the worry of using terminal? Thanks
Sent from my ZTE A2017U using XDA-Developers Legacy app
Click to expand...
Click to collapse
have you tried your method without the terminal command? personally, I don't know if that works without the command but I just used it since it won't harm anyway.
danromania said:
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
Click to expand...
Click to collapse
Hi just used from a russian website , Flashable b13 zip!
ZTE_A2017V1.0.0B13_BootStack_by_djkuz.zip https://mega.nz/#!AwpE…siKdy3Aje3vdqXJupa9A4s
CRC32: CEE662FD
MD5: 67635E2EEE51BFF0E3B6F73591BA88B8
SHA-1: DAC1646FD8B0349CF262C7FD4C15987D5F700304
ZTE_A2017V1.0.0B13_StockSystem_by_djkuz.zip https://mega.nz/#!gpJy…uKflqeeCugZQosmbGj9xPk
CRC32: 79D0419A
MD5: DDD785A98FD32144920970B6B6BE8089
SHA-1: C96EDFE8F414A0D6904DAB1ED8673591D8DE496B
I am using it and it works! I Have just updated the bootstack and then installed the ZAD rom, but if you like the stock just install them both!
parazite69 said:
Hi just used from a russian website , Flashable b13 zip!
ZTE_A2017V1.0.0B13_BootStack_by_djkuz.zip https://mega.nz/#!AwpE…siKdy3Aje3vdqXJupa9A4s
CRC32: CEE662FD
MD5: 67635E2EEE51BFF0E3B6F73591BA88B8
SHA-1: DAC1646FD8B0349CF262C7FD4C15987D5F700304
ZTE_A2017V1.0.0B13_StockSystem_by_djkuz.zip https://mega.nz/#!gpJy…uKflqeeCugZQosmbGj9xPk
CRC32: 79D0419A
MD5: DDD785A98FD32144920970B6B6BE8089
SHA-1: C96EDFE8F414A0D6904DAB1ED8673591D8DE496B
I am using it and it works! I Have just updated the bootstack and then installed the ZAD rom, but if you like the stock just install them both!
Click to expand...
Click to collapse
Great find! Do you mind if I put this in my OP so that others can use it too? Seems like a lot of other users can't manage to get my method well.
otaconremo said:
the links were up okay as I opened them now. you may want to disable your antivirus too since this will trigger it false positive.
also, all the files I used were posted in the links i posted. credits to the owners btw.
Click to expand...
Click to collapse
Thanks for replying. The link works until you try to download it. When you get past the ads, you get to this http://fs1.d-h.st/download/00237/Ienb/axon7backup.zip Did you also try downloading it? Either I am doing something wrong? Thanks.
yvgamer94 said:
Thanks for replying. The link works until you try to download it. When you get past the ads, you get to this http://fs1.d-h.st/download/00237/Ienb/axon7backup.zip Did you also try downloading it? Either I am doing something wrong? Thanks.
Click to expand...
Click to collapse
Yes I did download my files using those links. Try installing adblock plus on your browser. Or try other browsers.
otaconremo said:
Great find! Do you mind if I put this in my OP so that others can use it too? Seems like a lot of other users can't manage to get my method well.
Click to expand...
Click to collapse
Sure go ahead.
otaconremo said:
Yes I did download my files using those links. Try installing adblock plus on your browser. Or try other browsers.
Click to expand...
Click to collapse
It's probably just my pc or browser. It's ok though since I managed bootloader unlock and flash twrp with this guide instead:
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514/
Thanks for your help though
I have one (stupid) question for which I can't find answer: I stuck at step 2 when I need to enable OEM unlocking. Problem is that some PIN is required but I don't know it and don't know where to find it? Many thanks!
This device is more reasonable to buy as it is small and elegant at a decent price.
It is IP68 water-friendly device and the display is much better - higher FPS than on higher resolution OLEDs - good for action games.
Root using CF-autoroot
Download the file from CF-auto-root repository:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
If you have Nougat or after update to Android 7.0:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
Wipe data + cache before
Flash CF-autoroot before device initial configuration
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
Click to expand...
Click to collapse
Unzip the file
Run Odin from the unzipped folder
Browse by clicking AP button the *.md5 file from the unzipped folder
Connect the A320F in download mode (start the device by holding Power+Home+Volume DOWN)
After starting the device in download mode, press Volume UP one to allow the download
A new COM port should be recognized by Odin after the device is connected via USB
Press Start button in in Odin
Rooting will take place automatically and the device will restart twice.
After the first restart you can disconnect the cable from the PC.
Second restart might take a few minutes.
After that you will find the SuperSU app installed.
Other, more complicated methods:
Rooting using custom recovery:
You will need:
SM-A320F with Exynos CPU (waiting for updates on other model)
Android Marshmallow 6.0.1 on your device
Odin v3.0.4 (download link below)
Team Win Recovery Project - TWRP (download link here) or ClockWork Mod Custom Recovery - CWM (download link below)
(Recommended custom recovery: Team Win Recovery Project :good: - more features, newer, works better)
SuperSU-v2.79-201612051815 (latest ZIP version available today - download link below)
SM-A320F TWRP & CWM recovery installation procedure:
On your device enable developer options and then disable OEM lock (FRP lock) for the device to allow you to flash custom recovery
(Activate OEM unlock from developer options menu)
Boot your device in Odin downlaod mode (hold VolDOWN + Home + Power)
Flash the *.tar file of TWRP or for the CWM using Odin's PDA option
(Uncheck Auto Reboot and F. Reset Time)
Force reboot your device (hold VolDOWN + Power for 10 seconds)
SM-A320F SuperSU ZIP installation procedure:
Copy SuperSU-v2.79-201612051815.zip on a microSD card (trough USB data cable or any other method)
Unplug the USB data cable from the phone and shut down the device
Start your device in Recovery mode (Hold VolUP + Home + Power)
(RECOVERY IS NOT SEANDROID ENFORCED - this warning is normal when booting into CWM custom recovery but not with TWRP)
The recovery menu will appear
> Using TWRP Recovery:
Swipe to allow modifications
Tap on Install
Tap on Select Storage at the bottom and select MicroSDCard then tap OK
Browse for the SuperSU-v2.79-201612051815.zip and tap on it to install it
Swipe to install SuperSU (confirm Flash)
> Using CWM Recovery:
Select Install zip update package (use VolDOWN/VolUP to navigate and Power to select)
Select Choose zip from sdcard
Select SuperSU-v2.79-201612051815.zip and press Power to install Super SU
The installation will perform automatically and the device will reboot twice.
First reboot will take longer. Please be patient. After the second reboot you will have SuperSU and root.
Downsides/bugs:
Knox will be tripped the second you flash a custom recovery (Warranty void: 1 - non reversibile)
(That means that you will lose the warranty for your device and that can not be changed)
(Perhaps that's why I personally can't invest more than $300 in a Samsung cellphone ever)
You won't be able to use Knox-related functions including Secure Folder ever again
Because of a SuperSU bug you won't be able to use Smart View (Miracast, project the screen to smart TV) unless you make an edit as follows:
Lewdog45 said:
Use a file browser such as Root Browser and go to the root of your device then locate the "System" folder and find build.prop and edit it with any application that can edit it and find the bottom line, right at the edge of the bottom line you need to press enter twice and then paste this:
wlan.wfd.hdcp=disable
And then save it and reboot your device.
Click to expand...
Click to collapse
Special thanks to: ashyx for compiling and updating TWRP recovery for SM-A320F and to XN Logos for providing compatible CWM recovery with SM-A320F.
Please feel free to post your attempts on rooting this device and the results. If other methods will show-up I will include them up here.
jnflos said:
Up to this point there is no success in rooting the Galaxy A3 2017 device.
This device is more reasonable to buy as it is small and elegant at a decent price.
Unfortunately there is no sign of working root method for the device.
Please feel free to update this topic with your attempts on rooting this device, and if success will strike, it will float up here for everyone to see.
Click to expand...
Click to collapse
+1
Thanks to developpers
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Here
I tried this morning without succes
copernic75 said:
I tried this morning without succes
Click to expand...
Click to collapse
Why didn't it work? Any errors in Odin?
No error in odin.
When i tried To reboot in revovery mode i don't have access to cmw .. just Android error message + Knox error
XN Logos said:
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Click to expand...
Click to collapse
Thanks! I will test this on my Galaxy SM-A320FL (single sim) to see...
Root was successful! I will update the first post with the mini tutorial and the files needed
REMOVED
I have indeed a a320-FL french model... Exynos inside.
What do you suggest?
jnflos said:
Root was successful! I will update the first post with the mini tutorial and the files needed
Click to expand...
Click to collapse
This cwm worked for Exynos?
tys0n said:
This cwm worked for Exynos?
Click to expand...
Click to collapse
Yes it worked. Please follow the tutorial that I wrote on the first post.
jnflos said:
Yes it worked. Please follow the tutorial that I wrote on the first post.
Click to expand...
Click to collapse
Ok good then I will remove my earlier post. I don't have the device so I can't try it.
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
copernic75 said:
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
Click to expand...
Click to collapse
Format the SD card on your PC using FAT32 option (use an USB adapter).
Copy the zip on the card, Insert it into the phone and reboot into recovery to test.
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
copernic75 said:
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
Click to expand...
Click to collapse
Yes. You can flash twrp in cwm and reboot to recovery. Twrp will be there instead.
wich version to choose?
Sorry. There's no twrp for a320 yet, but in general it's working fine to flash new recovery with existing one.
Hey guys, I will receive my a3 2017 soon and I was wondering if it would be preferable to root it now than waiting for the update to Nougat and re-root it then... Any idea when the update will be available for this phone? I was also wondering if I should use a specific brand or type of micro sd card with this phone?
Thanks
ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip (includes patches fixing issues with EDL, FASTBOOT and ROOT)
CRC32: 797405C0
MD5: 3AFD84C314960DE0DFFAAB950A435745
SHA-1: F4C358F8CD5E043FE897E7D51FE93780C395CE42 https://4pda.ru/pages/go/?u=https%3A%2F%2Fmega.nz%2F%23!FtI3iSSa!4guZpoM2oCmgoxTiBBFA_Rt1wY1cdZTbA7WcugkLSic&e=60952279
ZTE_A2017_V1.1.0B15_StockSystem_by_djkuz.zip https://4pda.ru/pages/go/?u=https%3A%2F%2Fmega.nz%2F%23!Jp5mna5a!sS9Ns_WlvqeKRcXGjrDST43PQ09Zgb_hgIqN-5heIWg&e=60952279
CRC32: F6CD7F71
MD5: C1A3719F641ED63EE5D53E968DE6D798
SHA-1: E6E0E175663B78AC238BD1D9C620DF0FCF27E267
Instructions:
1. Go to TWRP
2. Advanced wipe - Dalvik,System,Data,Cache
3. Installing this file first : BootStack ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip
4. This one second : StockSystem ZTE_A2017_V1.1.0B15_StockSystem_by_djkuz.zip
5. Flashing this one as well: no-verity-opt-encrypt-5.1.zip
6. wipe cache/dalvik
7. In TWRP input this command: reboot disemmcwp
8. Boot into the system
9. Check if its possible to enter edl mode (fix is already included in bootstack) Volume down + power button
10. Check you you are able to get to FASTBOOT via the combination of buttons Volumeup+Powerbutton
11. Install GApps ZTE Axon 7
Installing SuperSU:
1. Go back to recovery TWRP
2. Flash SuperSU 2.79
3. Wipe cache/dalvik
4. In the Terminal of TWRP input this command: reboot disemmcwp
5. Boot to the system and see if SuperSU is working.
Disclaimer (READ!) :
This is being updated by the amazing djkuz which is active in 4pda and sometimes here as well.
it seems that 4pda is more active then xda for apperant reasons , axon is more popular in russia.
All of this is not on my responsibility if you **** your device, your problem ( Ive just merely copied the guide from a russian forum 4pda).
Ive done this myself but I can't make root stick. (will be happy for an advice and some brainstorming on this one)
@djkuz
Can you please assist -
The root doesn't stick I follow step by step, when I enter the supersu app it says there is no root.
booth files 2.7GB? bootstak shood me smaller
yosef019 said:
booth files 2.7GB? bootstak shood me smaller
Click to expand...
Click to collapse
Fixed
parazite69 said:
@djkuz
Can you please assist -
The root doesn't stick I follow step by step, when I enter the supersu app it says there is no root.
Click to expand...
Click to collapse
Very strange, what version of SuperSu was used? 2.79 stable only works correctly.
djkuz said:
Very strange, what version of SuperSu was used? 2.79 stable only works correctly.
Click to expand...
Click to collapse
Yes, just as the one I have posted here. Followed exactly as it says in your guide.
Hi guys. Been following the thread in 4pda too. Could you please post a mirror for te edl_fix.zip here? I can't download it in 4pda as i can't create an account there. Thanks so much.
parazite69 said:
Yes, just as the one, I have posted here. Followed exactly as it says in your guide.
Click to expand...
Click to collapse
Try this:
1. Go back to recovery TWRP
2. Flash patching boot (in boot partition) https://mega.nz/#!dhwCHLqI!3lmYs2wV6DGYwqteU_h98ffZbeJp9lVXCyQzz-wQG3A (not need to flash no-verity-opt-encrypt-5.1.zip)
2. Flash SuperSU 2.79 https://mega.nz/#!J8BggKDS!OYSLIQ4vSntRGO8lBWnp8frBymtfC_oo57bzIGubf2A
3. Wipe cache/dalvik
4. In the Terminal of TWRP input this command: reboot disemmcwp !!!!!!!!!!!!
---------- Post added at 11:14 PM ---------- Previous post was at 11:11 PM ----------
otaconremo said:
Hi guys. Been following the thread in 4pda too. Could you please post a mirror for te edl_fix.zip here? I can't download it in 4pda as i can't create an account there. Thanks so much.
Click to expand...
Click to collapse
https://mega.nz/#!VhJDjAQZ!CDbx4YW_LIVQedY_7RixQk-7J6Q0T--W8lYhIVSP0-Q
djkuz said:
Try this:
1. Go back to recovery TWRP
2. Flash patching boot (in boot partition) https://mega.nz/#!dhwCHLqI!3lmYs2wV6DGYwqteU_h98ffZbeJp9lVXCyQzz-wQG3A (not need to flash no-verity-opt-encrypt-5.1.zip)
2. Flash SuperSU 2.79 https://mega.nz/#!J8BggKDS!OYSLIQ4vSntRGO8lBWnp8frBymtfC_oo57bzIGubf2A
3. Wipe cache/dalvik
4. In the Terminal of TWRP input this command: reboot disemmcwp !!!!!!!!!!!!
---------- Post added at 11:14 PM ---------- Previous post was at 11:11 PM ----------
https://mega.nz/#!VhJDjAQZ!CDbx4YW_LIVQedY_7RixQk-7J6Q0T--W8lYhIVSP0-Q
Click to expand...
Click to collapse
Amazing worked like charm!!! Thank you.
If you may share a bit on what was wrong ?
update :
It still says its not rooted
Thank you so much @djkuz.
@djkuz
I have moved straight from Zad 0.3mix with Chinese
Bootstack to your guide followed exactly and then implemented the fix you suggested here .
Still the SuperSU says its unrooted, but it constantly grants permission to titanium backup... But still TB doesn't work.
Thank you for assisting on this.
parazite69 said:
@djkuz
I have moved straight from Zad 0.3mix with Chinese
Bootstack to your guide followed exactly and then implemented the fix you suggested here .
Still the SuperSU says its unrooted, but it constantly grants permission to titanium backup... But still TB doesn't work.
Thank you for assisting on this.
Click to expand...
Click to collapse
Have you tried issuing command "reboot disemmcwp" in twrp after installing supersu?
otaconremo said:
Have you tried issuing command "reboot disemmcwp" in twrp after installing supersu?
Click to expand...
Click to collapse
Yes :crying:
parazite69 said:
@djkuz
I have moved straight from Zad 0.3mix with Chinese
Bootstack to your guide followed exactly and then implemented the fix you suggested here .
Still the SuperSU says its unrooted, but it constantly grants permission to titanium backup... But still TB doesn't work.
Thank you for assisting on this.
Click to expand...
Click to collapse
Yes, this problem occurs on some phones...
Did you flash ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip ???
Try in TWRP:
1. Tap Mount and Check "Mount, System as Read-only"
2. Tap WIPE > ADVANCE WIPE > Select Data > Repair or Change File System and Select ext4 (All data will be deleted)
2. Tap WIPE > ADVANCE WIPE > Select Dalvik,System,Data,Cache and Swipe
3. Flash BootStack ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip
4. Flash StockSystem ZTE_A2017_V1.1.0B15_StockSystem_by_djkuz.zip
5. Flash no-verity-opt-encrypt-5.1.zip
6. Flash SuperSU 2.79
7. wipe cache/dalvik
8. Tap ADVANCED > TERMINAL > input this command: reboot disemmcwp
djkuz said:
Yes, this problem occurs on some phones...
Did you flash ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip ???
Try in TWRP:
1. Tap Mount and Check "Mount, System as Read-only"
2. Tap WIPE > ADVANCE WIPE > Select Data > Repair or Change File System and Select ext4 (All data will be deleted)
2. Tap WIPE > ADVANCE WIPE > Select Dalvik,System,Data,Cache and Swipe
3. Flash BootStack ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip
4. Flash StockSystem ZTE_A2017_V1.1.0B15_StockSystem_by_djkuz.zip
5. Flash no-verity-opt-encrypt-5.1.zip
6. Flash SuperSU 2.79
7. wipe cache/dalvik
8. Tap ADVANCED > TERMINAL > input this command: reboot disemmcwp
Click to expand...
Click to collapse
Yes Ive flashed ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip .
I will try it later today and update on the outcome.
Appreciate the help.
parazite69 said:
Yes Ive flashed ZTE_A2017_V1.1.0B15_BootStack_Fix_by_djkuz.zip .
I will try it later today and update on the outcome.
Appreciate the help.
Click to expand...
Click to collapse
And do not forget to go into the Mi-Aassistant and allow autorun SuperSU
hey is it possble return to the B13 6.0 china phone install TWRP and then install this
my pc cant recodnize the phone in EDL mode (with drivers installed)
yosef019 said:
hey is it possble return to the B13 6.0 china phone install TWRP and then install this
my pc cant recodnize the phone in EDL mode (with drivers installed)
Click to expand...
Click to collapse
Yes, it is possible, but the lack of the ability to flash through the EDL is very dangerous !!!
Try:
1. Install the driver from the phone, selecting in settings - connection to the PC - installing the drivers!
2. Boot into the EDL through the command - adb reboot edl
3. Try using another version of MyFlash (for example Beta) and use another USB port on your computer.
And if Windows determines phone as Qualcomm HS-USB QDLoader 9008, but Miflash can not see it - reboot the phone in EDL again!
Don't forget to change the speed of the com port (Qualcomm HS-USB QDLoader 9008) to 115200 (instead of 9600)
djkuz said:
And do not forget to go into the Mi-Aassistant and allow autorun SuperSU
Click to expand...
Click to collapse
Worked!
Thankyou