I have installed the newest Malaysk ROM on my HU. On the picture attached you can see the Advanced Power Menu like it should be. In my case there is only Reboot after long pressing the button on the top right. Does it belong to the launcher? If I am pressing the button only short my device turns black, but the knobs are still lightning (also you can hear the radio). It seems that the device is hanging up so I had to press the reset button.
Also I want to know If its possible to shutdown the unit completely. Without having connected the ACC wire.
I have the same question about the pwer menu. Like you I only get one option.
Related
I have a problem, I want to disconnect the down button on the side of my Touch Pro. I have a bad habit I can't seem to break when I grab the phone my finger presses the down volume and shuts off the phone. So I would like to deactivate that button. Please don't just tell me to edit the registry without explaining how to do it step by step. Even though I have edit the registry before, I am not that familular with it. Thanks for the help.
Disconnecting the vol buttons
You can install the cab attached, soft reset, then go into settings>system>keyboard config. Press menu on the bottom right corner, then select add key. It will say hold the key you want to configure, or something like that, so hold the vol down key. Then it will pop up a new window, just tap apply/OK. Then tap update config. Bingo! You got it.
You can also edit what the keys do, too. Just ask if you want to.
Please tell me if this is too hard, because then I will post screenshots.
I have done this on my verizon tp.
Hi folks, not sure if this is the right place for this, but hopefully it will get moved if needed.
So, how many times have you used the menu button on your phone to check the time? And then you have to press the power button on the side to turn the screen off - right?
What if the menu/home button was able to turn of the screen when on the lockscreen? So you only need that one button to turn the screen on and off?
I know, I know, there's a power button like RIGHT THERE...but you have to change your hand position/shape to use it, when the home button is sat there doing nothing.
Is it possible? Does anybody want to have a go at it?
Or am I just a lazy so-and-so?
I have one..but I dont know can it working with your ROM... Im using CrDroid LLA + JKay,, backup your rom before flash it..
Here try yourselve: http://www.mediafire.com/?2hlh4abepn2x9e9
Hello, I have just installed the latest NAND rom package (updated on 15-03-13) on my Telus RHOD500 and I'm having troubles with the power button (the button on top of the phone).
It's not mapped to anything once booted to Android. I mean I can access the recovery by pressing the Power button in miniPooploader so I know the key is not broken.
In android, quick pressing does not shut down the screen, long-pressing does no bring up the power menu and to wake the device up I have to use the End key.
A few times between boots when I would quick-press the power key it'll pop up the shutdown menu but now it's not doing anything.
I've installed Android Tuner, ES task manager and SetCPU on second reboot so these are the 2 application I installed that could come into problem before I noticed the problem. Uninstalling them doesn't do any good.
Also, where could I change the physical keyboard keymap? I got the underscore symbol mapped to letter "B" where it should be "P". It's not the only one of course but I don't find this too irritating so it's just a side-question like that.
Anyway thanks in advance!
psyko_chewbacca said:
Hello, I have just installed the latest NAND rom package (updated on 15-03-13) on my Telus RHOD500 and I'm having troubles with the power button (the button on top of the phone).
It's not mapped to anything once booted to Android. I mean I can access the recovery by pressing the Power button in miniPooploader so I know the key is not broken.
In android, quick pressing does not shut down the screen, long-pressing does no bring up the power menu and to wake the device up I have to use the End key.
A few times between boots when I would quick-press the power key it'll pop up the shutdown menu but now it's not doing anything.
I've installed Android Tuner, ES task manager and SetCPU on second reboot so these are the 2 application I installed that could come into problem before I noticed the problem. Uninstalling them doesn't do any good.
Also, where could I change the physical keyboard keymap? I got the underscore symbol mapped to letter "B" where it should be "P". It's not the only one of course but I don't find this too irritating so it's just a side-question like that.
Anyway thanks in advance!
Click to expand...
Click to collapse
You have to open the boot.img and edit the keyboard maps inside the ramdisk there to make them stick.
Look around post 47-50 for some ideas on what to edit.
http://forum.xda-developers.com/showthread.php?t=1965459
Good luck.
wizardknight said:
You have to open the boot.img and edit the keyboard maps inside the ramdisk there to make them stick.
Look around post 47-50 for some ideas on what to edit.
http://forum.xda-developers.com/showthread.php?t=1965459
Good luck.
Click to expand...
Click to collapse
Alright thank you. That will be good for the keyboard issue. Could it also fix the power button issue? Is the mapping of the keyboard is related to the mapping of other buttons?
So where can I find the boot.img file? Thanks!
Hello all... long time XDA user, not enough time poster... Ok I had the (now to me) infamous power button issue this past weekend. I was able to get my phone going after beating the bejeezus out of it. With that said, I figured I would keep to using the power button to a minimal dosage. What I have is the following- S4 rooted, with ES File explorer installed with the root option enabled, quick boot, wanam, and mylock. The easiest stuff- I set a quick boot widget for power off and one for reboot (so no power buttons for that), I use mylock for locking the phone, wanam- added screenshot to power menu (among other mods that don't pertain to this), and home button for turning phone on (or Volume button- details coming).
I am going to attach a couple of screenshots too...
With ES File Explorer (going for forward, will be labeled ES) go to Device level / scroll down to system, go to usr, and then keylayout, in there go to Generic.kl. Once in there, scroll down to Key 116. Tap the little pencil in the upper screen of ES. Copy the contents of Key 116 - POWER WAKE (I recommend copying so you have all the spaces needed), delete out the key 114 option (I chose Volume Down) and paste that in there. Now you can leave both at POWER WAKE, or you can change 116 to the VOLUME_DOWN if you want to use the power button to turn down the audio. If you blank it out or add other characters it seems to kill the back button and menu button- SO I RECOMMEND TO HAVE SOMETHING THERE. OK good... so moving on-
Hit the back button and click to save the file.
Next-
in the same level as the Generic file, go to gpio-keys.kl).. Scroll down to Key 114 and replace the VOLUME_DOWN with the POWER WAKE that you should still have on your clipboard. Hit the back button and save text.
Final, you will have to reboot your phone in order for the changes to take effect.
Going forward, if you chose to use the power button for volume down, you will no longer be able able to use the power button while the phone is on for power purposes... it will be a volume down button now. Your volume down button will act like the power, so you can bring up the power menu for shut down/screenshots/etc.
To turn the phone one (if it is off), you have a few options... if the power button still works it will power the phone on (it doesn't matter that you have made this mod, it will not allow the volume down to turn a phone on from power off. If the button is shot shot, you can use the micro usb trick to turn it on ( hold down volume down and power, plug it in, then when download comes on put volume down to restart). Or you can use a jig...
Anyway, I hope this helps someone out. Thank you for checking this out.
https://www.flickr.com/photos/[email protected]/shares/2i5mPz
Hello. On every phone, if i hold the powrr button long inought, it will pop up a power menu. But on meizu, there is only 2 options (power off, reatart) and i found app, that have more options (recovery, turn off sounds, etc). So is possible to somehowe stop the menu function and replace it with open app function? I know that it sounds like an idiot idea, but for me it would be great. Thanks for your time and answers.
P.S.: i was thinnking about macrodroid, but it have only power button toggle (3-5 times) but every device i know lock screen after 1 time pushing power button. Sr for my english