I am trying to configure the ethernet connection for remix. I am on a desktop booting from a USB. I try to add an account and I get a notification that the network is not connected, I went to settings, my ethernet is set to automatic and is enabled. No connection! any ideas?
Thanks
Related
Hello,
I am searching for apps who can wake on LAN my wireless PC by using my HTC Legend device (through internet connection). Is this possible? What apps are currently the best in the market? Thanks a lot for your advise.
Rgds, Marvon
I'm normally using this one:
https://market.android.com/details?id=net.mafro.android.wakeonlan
and sometimes this one:
https://market.android.com/details?id=com.benfinnigan.wol
But you have to check, that you can open UDP Port 9 on your Router on the Broadcast IP (x.x.x.255) and add a DynDNS Domain if you dont have a static IP.
If you have a FritzBox you cannot open that port that easily but there is a nice App for that:
https://market.android.com/details?id=de.sifl.fritzdroid
Hi Fabi280,
thanks a lot for your reply. I am completely new to this. WOL is enabled in the bios but i cannot find the wol settings in my wireless WMP600N network card). Do you have a manual available how to set this up and let it work?
tchuss,
Marvon
The Solution is pretty simple.
There is no WOL with WLAN, actually there is but there aren't much devices that support that Technology. So lets say it just works with a LAN Cable plugged in.
A Device that has Wake On Lan enabled doesnt shut off the Network card, so its always connected, even if it is off (and its connected to power).
LAN doesnt consume that much power, as there is always power on the LAN Cable.
WLAN consumes much more power than LAN and is often used on Mobile Devices which are using Batteries
Hy, can anyone help me with this:
I have made my pc to wake and everything is working great, but after some time it stops working and I cannot wake my pc anymore... Anyone knows what is the problem? I tried to set up lease and everything and I do not know what is the problem...
In my android app I have:
ip address: 86.xx.xx.xx
mac addres: CB:xx:xx:xx:xx:xx (from my pc)
and port: 9
in router I have pre-assigned DHCP IP Address (192.xxx.x.xx) to MAC address.
If I turn off my pc, I can turn on my pc with the app, but after some time it stops working...
any help please...
Sharing 3G/4G Internet connection on Desktop/PC/NOTEBOOK/LAPTOP connected with Android mobile phone via WiFi HOTSPOT or USB LAN or 3G/4G USB modem datacard , and then use the wireless Wifi router as a WiFi access point for the other devices.
1) Setting up the router
Router WAN will not be connected to any modem, *** NOTHING ON ROUTER WAN PORT (NO INTERNET VIA PPPoE DSL , STATIC OR DYNAMIC IPs) but it will made to act as Access Point for "sharing" the shared internet connection on Desktop/PC/NOTEBOOK/LAPTOP.
First, one needs to access the wireless Wifi router's configuration settings, usually one need to connect the Wifi router, and then access its setup page either over WiFi network, or by plugging it to desktop or laptop in 1 of its 4 LAN ports. setup page is accessible by entering the router's IP address 192.168.1.1 on IE address bar or some other browser like Firefox etc. however consider your router's manual to see how to get to the settings. Ideally, resetting the wireless Wifi router and then following its setup guide would best way start off.
Once on Wireless Wifi router's settings do the following:
a) Enable the Wifi connection. It should be enabled by default, but some routers require you to manually enable it.
b) Secure your network. Under security options, there should be a way for you to specify a password for your new wireless network. Here you will have multiple options, probably WEP, WPA and WPA2. Set up either WEP or WPA/WPA2 security. WPA2 would be best if your router supports it. Consider having a look at the router's manual for that.
c) Disable DHCP. Look for a setting that says something about automatic addressing (or "DHCP"). Which is enabled by default, disable it – ****this is most important!
d) Connect the router to Computer Desktop/PC/NOTEBOOK/LAPTOP. The LAN port of Desktop should be connected to 1 out of router's 4 LAN ports via RJ45 cable. Wireless Wifi router will have one WAN internet Modem port at the back designated only for modems, as mentioned above do not use connect anything to this port so-called WAN port.
Once above steps are done Wireless Wifi router is all set.
2) Enable connection sharing
• Now if you have 3G/4G dongle data card then insert it into USB port of Computer Desktop/PC/NOTEBOOK/LAPTOP
Go to "Network Connections"; locate your “3G modem” connection
Right click and select "Properties"
Select "Advanced"
Enable "Internet Connection Sharing"
One should be able to share it over Computer Desktop/PC/NOTEBOOK/LAPTOP LAN interface connected to wireless router or share it over Wifi card connected to Wireless router.
• If you have 3G/4G Internet connection on Android mobile phone connected USB port of Computer Desktop/PC/NOTEBOOK/LAPTOP
Go to "Network Connections"; locate "Remote NDIS based Internet Sharing Device" connection
Right click and select "Properties"
Select "Advanced"
Enable "Internet Connection Sharing"
One should be able to share it over Computer Desktop/PC/NOTEBOOK/LAPTOP LAN interface connected to wireless router or share it over Wifi card connected to Wireless router.
• If you have 3G/4G Internet connection on Android mobile phone connected via Android mobile HOTSPOT to Computer Desktop/PC/NOTEBOOK/LAPTOP
Go to "Network Connections", locate Wifi adapter e.g. "Broadcom 802.11g Network Adapter" connection connected to Android mobile HOTSPOT
Right click and select "Properties"
Select "Advanced"
Enable "Internet Connection Sharing"
One should be able to shared it over Computer Desktop/PC/NOTEBOOK/LAPTOP LAN interface connected to wireless router or if you two wifi wireless adapter card then share it over 2nd Wifi card connected to Wireless router.
Once done you are all set to rock the network by connecting other Desktops/PCs/NOTEBOOKs/LAPTOPs/Android/windows/Apple/blackberry’s phones and other devices to Wifi wireless router Access point that you had set up. Your devices should acquire an IP address and be able to connect to the internet with any issues. Windows will lease out more than just one address when using windows ICS!
I have an ethernet to USB-C adapter, which I have connected to the phone, but I am not able to connect the Mate 20 to internet via cable.
Any particular trick to enable this?
You can do it, working out how to add screenshots from phone.
Here you go. I added the screenshots off the phone with cellular data and wifi disabled and USB ethernet active.
Enable developer options if not already, enter the settings for that and scroll down to "Select USB Configuration" and press that for the options. You're looking for the RNDIS (USB Ethernet) setting.
Mine works. Updating apps via Google Play on it right now and it's fast.
Also downloaded the entire map of the UK for Here Maps and it worked well.
Fantastic, working as we speak! Thank you
How about the other way around - use Mate's mobile connection to provide internet to a small router, via an USB typeC ethernet adaptor?
Hello, maybe this is my first post
I want to ask something about Ethernet.
Currently I'm using SM-T870
I'm using OTG to connect from Ethernet cable
On the tablet, the Ethernet was popped out
Then i cliked on that
But, when i clicked enable button, it was processing to enable, but fail
I checked and matched the configuration IP address withnthe router
With same cable & configuration IP, it was doing well when connected to laptop
Is there any kind of config that i've missed?
Thanks
I'm connecting to my home VPN via the VPN settings. But I can't have a consistently active vpn. If I check consistently active vpn checkox in the VPN settings the connect button will be grayed out (disabled). Without this checkbox activated I can connect to the VPN without issues. But if I lost the VPN connection I would go into VPN settings again an need to connect it manually again.
Why it the connect button disabled if I check the consistently active vpn checkbox?
Has nobody this problem?