This is a copy from my AT&T Desire 610
-Everyting its stock
-Just delete almost all AT&T
In order to flash it to your device you need be:
-Bootloader Unlocked
-Root
-TWRP 3.0.0
-Nandroid Backup from your own rom (i'm not responsive fro damages, etc, etc, etc)
Unzip and copy folder Htc_Desire_610_stock_att_debloated_TWRP3.0.0_backup to
TWRP/BACKUPS/HTxxxxxxxxxx/
*HTxxxxxxxxxx folder its generate acording your devide.
-Reboot in recovery mode (TWRP 3.0.0)
-Make wipes (also you can clean data & storage for a very vlean installation)
-Restore from folder Htc_Desire_610_stock_att_debloated_TWRP3.0.0_backup
-Reboot system
Boot in the welcome screen takes less than 5 mins (Be pacient)
Enjoy!!!
Htc_Desire_610_stock_att_debloated_TWRP3.0.0_backup
drive.google.com/open?id=0B04Tc99leOMiZ0lPTkxOQVNDX2c
Does it have to be 3.0.0? If so, how do I update. Through TWRP manager?
Nevermind got it updated
Also is this stock ROM rooted?
Thx the ROM is rooted, and no fc with be useful! Thanks again
Having a long boot time? Have you experienced this?
THANK YOU!!! Been trying to fix my phone for months! lol.
Awesome job. I just flashed it with no problems.
the nandriod backup des it need to be of stock rom? noob here
Related
hi, i wanna ask...if i wanna flash to another devoid.Franco ROM (previously using void.echo) do i still need to dl the Terminal Emulator & Custom Recovery Tool Image and its Flash Image then run the Terminal Emulator & key in the codes then only start flashing another ROM?
i've did tat at the first time i flashed to a void.echo ROM now i wanted to flash to devoid.franco, do i still need to repeat all that step again? or i just enter the "power button, volume down button and home button" mode then wipe then flash will be good?..need advice thanks..
Just wipe and flash..
thanks for quick reply!
another question...how do i know that i already have the ext partition?...after i wipe everything included wipe ext..do i still need to create again?
Wiping doesn't remove partition..
On Mike mod
can we install franco kernel on mike mod 6.5.2
If your from void#echo previously, do these:
1. Backup all your user apps+contacts via Titanium Backup and all SMS via SMS backup
(they're all available free in the market)
2. Turn off phone. Reboot to recovery (hold power button+home+vol down)
3. Wipe user data, .android secure, cache, dalvik-cache, battery stats, and wipe ext.
4. Since your on void#echo already, you don't need to partition your sdcard.
5. Download devoid.franco, use usb-toggle on the recovery menu and copy it from pc to your phone while on the recovery and flash it.
6. Reboot (first boot might take a while)
7. Configure settings, Install titanium backup and sms restore app, Then restore all apps+settings+SMS. Enjoy~
8. Well if you know already what your doing and want some further improvements (completely optional, just do a nandroid backup incase) :
8.1 Reboot to recovery
8.2 Flash the latest kernel version from franco's thread
8.3 Reboot
8.4 Flash the ZRAM module
8.5 Reboot and Enjoy your phone
Thanks Kira.Lawliet!
hmm...i actually partition my sdcard again...yea..i flash before saw your reply ._.
will it harm? i partition my sdcard again....n flash to devoid.franco
You have to partition only if you want apps2sd. Else let it be. You can easily remove the ext partition by partitioning with 0mb ext partition in recovery.
sanmore said:
can we install franco kernel on mike mod 6.5.2
Click to expand...
Click to collapse
definitely you can. just flash your device with mik_os mod first. then flash the franco kernel (v15 now) and lastly flash the ZRAM initializer.
just make sure you wipe the cache and dalvik cache first before you're flashing.
flashing
Ok guys just remember that rom flashing requires you to follow rom partition conditions while kernel flashing may not need to recreate partitions. In my case, I'm using Nessy Hypnos2 and been running with much fluidity after flashing FrancoKernel 14.2. But I did wipe all just to make sure there wont be any conflicts. HYPNOS2 + FRANCOKERNEL 14.2 is like coffee and cream, a perfect match like newlyweds.
I have just rooted my atrix(2.3.4) on my mac. What are the steps to installing or flashing a rom. Must be do able on mac. sorry for the noobyness -sincerely Nooby noob
I'm also a Mac user and I can help you with that since I've done that already.
1) Ok, you rooted, but before you flash a ROM you need to unlock the bootloader.
Here is how -> http://forum.xda-developers.com/showthread.php?t=1260517
2) Install Titanium Backup and backup all your apps.
3) Install ROM Manager (Android Market)
3) Install CWM RECOVERY (ClockworkMod) and make a full backup of your cell, so that if you want to go back you can. I believe you can do this from within ROM Manager.
4) Download the ROM zip file you want and copy it to your sdcard.
5) From within ROM Manager you can install that new ROM (zip file).
More info here: http://forum.xda-developers.com/showthread.php?t=1154600
I hope this helps.
Thank you so much I've tried like 50 forums i was starting to lose hope, also is using a rom worth it?
Try this Ginger mod, with ics & ginger theme [lot of ics stuffs in there],
http://forum.xda-developers.com/showthread.php?t=1400023
I've recently downloaded the Stable version of CM and I don't know how to install it, after installing it will I lose my data? App game datas?
Thanks a lot
True. When you install a new rom you should wipe data. Otherwise it crashes on startup. You can back up the data that
duykhanh187 said:
True. When you install a new rom you should wipe data. Otherwise it crashes on startup. You can back up the data that
Click to expand...
Click to collapse
So how do I install it?
I've looked into the other installation guides but those are for CM10.2 (Andorid 4.3) so I think its different installation method from 10.1, but I cant find a tutorial
C'mon...Read the first page of the CM10 thread & follow the installation instructions. Doesn't take a MENSA member to get it done
If you have used titanium backup root hayz to backup game data. Want to install a new ROM to install it into RECOVERY. If the rom you download it tails. ZIP Remember to wipe data + cache + dakvil before.
My device GT-i9100G
note: im always start all my flash from stock ROM (meaning stock JB 4.1.2)
my usual method, all can be done in the phone, no need odin if youre already stock;
-download all related file, CM10.1.3, CM GApps, Blazing kernel v8 (if you dont want your binary counter to change)...put them in external SD
-boot into recovery, select apply update from external storage, select file blazing kernel v8, let it finish and reboot normally
-then reboot into recovery again and install your Cm10.1.3 and GApps by navigating to your external SD (sorry cant remember the path)
-after finish installing both above file, let it reboot...if bootloop, reboot back into recovery and wipe data, cache and dalvik, and then reboot
now your CM10.1.3 is ready~
-hit thanks if my post helps you-
Hi everybody! This is my first time posting here and first time trying to install a custom rom. I've been running stock 4.1.2 for 3 years but the phone lately got very slow and battery has been draining very fast so i decided to reinstall everything. I decided to try a custom rom as it will be missing all the bloatware and after reading about different custom roms decided to go for NeatROM based on 4.4.
Ive read some guides on how to install it and was confident how to do it but the more i read the more confused i got.
I would be very greatfull if someone can give me step by step instructions with links to the correct files.
My phone is:
Gt-I9100
Android versio 4.1.2
Baseband version I9100XXMS2
Kernel version 3.0.31-1211311 , [email protected]#3, Smp preempt thu may 16 10:05:20 kst 2013
Build number jzo54k.I9100xwlsw
What I have done so far is:
- done a backup with Kies before i changed anything
- rooted the phone using a file CWM-superSU-v0.97.zip by putting on ext SD card and booting in recovery
-installed Titanium Backup and did a backup with it
I'm confused with what to do next. This is where I need your help. I read many user comments on different websites that their phone got bricked and i do not want to do that, that's why i want to clarify all the steps.
I read i should install PhilZ CWM recovery and found this page
http://forum.xda-developers.com/gal...lz-cwm6-stock-kernel-cwm6-root-exfat-t1877270
Should i chose file << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >> for xwlsw
Should i install it using Odin method or by copying to ext sd card?
What is that "no yellow triangle" thing about?
Then should i follow instructions on
http://forum.xda-developers.com/gal...ivatives/rom-i9100-aosp-neatrom-v5-8-t2603169
Installation with Full wipe:
-Download KitKat CWM Recovery and save zip to internal SDcard
-Download AOSP NeatROM and save zip to internal SDcard
-Download Google Apps and save zip to internal SDcard
-Boot into CWM or PhilZ Recovery (Volume up + Home + Power)
-DO A DATA WIPE / Clean to install a new ROM
-Go to Advance and Select Wipe dalvik cache
-Go to Mounts and storage, select Format system, Format preload
-Select Install zip from SD card
-Flash KitKat CWM Recovery
-Reboot RECOVERY
-Flash NeatROM
-Flash Google Apps (optional)
-Reboot your device
Will be able to copy the contacts, sms etc from the Kies backup once NeatRom is installed? Should i use titanium backup? Before insatlling the rom it says to do a Nandroid backup? Is that done in recovery mode when Philz CWM has been installed?
i would appreciate if you can list all the steps and most importantly links to correct files.
Just refer http://forum.xda-developers.com/showthread.php?p=53499457
Sent from my Nexus 5 using XDA Free mobile app
Installing NeatRom
Lomisz said:
Hi everybody! This is my first time posting here and first time trying to install a custom rom. I've been running stock 4.1.2 for 3 years but the phone lately got very slow and battery has been draining very fast so i decided to reinstall everything. I decided to try a custom rom as it will be missing all the bloatware and after reading about different custom roms decided to go for NeatROM based on 4.4.
Ive read some guides on how to install it and was confident how to do it but the more i read the more confused i got.
I would be very greatfull if someone can give me step by step instructions with links to the correct files.
My phone is:
Gt-I9100
Android versio 4.1.2
Baseband version I9100XXMS2
Kernel version 3.0.31-1211311 , [email protected]#3, Smp preempt thu may 16 10:05:20 kst 2013
Build number jzo54k.I9100xwlsw
What I have done so far is:
- done a backup with Kies before i changed anything
- rooted the phone using a file CWM-superSU-v0.97.zip by putting on ext SD card and booting in recovery
-installed Titanium Backup and did a backup with it
I'm confused with what to do next. This is where I need your help. I read many user comments on different websites that their phone got bricked and i do not want to do that, that's why i want to clarify all the steps.
I read i should install PhilZ CWM recovery and found this page
http://forum.xda-developers.com/gal...lz-cwm6-stock-kernel-cwm6-root-exfat-t1877270
Should i chose file << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >> for xwlsw
Should i install it using Odin method or by copying to ext sd card?
What is that "no yellow triangle" thing about?
Then should i follow instructions on
http://forum.xda-developers.com/gal...ivatives/rom-i9100-aosp-neatrom-v5-8-t2603169
Installation with Full wipe:
-Download KitKat CWM Recovery and save zip to internal SDcard
-Download AOSP NeatROM and save zip to internal SDcard
-Download Google Apps and save zip to internal SDcard
-Boot into CWM or PhilZ Recovery (Volume up + Home + Power)
-DO A DATA WIPE / Clean to install a new ROM
-Go to Advance and Select Wipe dalvik cache
-Go to Mounts and storage, select Format system, Format preload
-Select Install zip from SD card
-Flash KitKat CWM Recovery
-Reboot RECOVERY
-Flash NeatROM
-Flash Google Apps (optional)
-Reboot your device
Will be able to copy the contacts, sms etc from the Kies backup once NeatRom is installed? Should i use titanium backup? Before insatlling the rom it says to do a Nandroid backup? Is that done in recovery mode when Philz CWM has been installed?
i would appreciate if you can list all the steps and most importantly links to correct files.
Click to expand...
Click to collapse
Hi Lomisz
First of all consider that after 3 years you battery couldd be near its end of life, could not be a firmware related problem (after nearly 2 years my battery cannot last one day any more, I'm going to change it).
Actually I'm happily running NeatRom v6.4 which is 4.1.2 based.
If You want to install 4.4 NeatRom version you have to follow the instructions on the thread (normally NeatRom instructions are well written).
FORGOT to use Keys to restore any data! My advice is to use always Titanium Backup, I've always been able to restore SMS, phone contacts (which usually I keep on my Gmail Phonebook), settings, Wifi, and applications.
If You're running a rooted firmware with recovery I suggest you to perform a nandroid Backup from recovery in order to be able to do a full restore in case of failure.
Thanks for the help. managed to install it last night and everything is working.
One more question, if I want to try some other custom roms which are not based on kitkat then do I need to flash a different CWM recover than the KitKat compatible one that I used so far?
Lomisz said:
Thanks for the help. managed to install it last night and everything is working.
One more question, if I want to try some other custom roms which are not based on kitkat then do I need to flash a different CWM recover than the KitKat compatible one that I used so far?
Click to expand...
Click to collapse
No
And a little suggestion: in case you have kitkat cwm as flashable zip on your storage, leave it there, cause it helped me out often since I'm flashing stuff.
Sometimes flashing something will show an error or elsewhat, but using this cwm version helped me out most of the time till now
Sent from my GT-I9100 using XDA Free mobile app
THREAD CLOSED!!!
[G531F] CS-Rom v3.2 (android 5.1.1) by Adi [FIXED ALL BUGS!]
Features:
-Pre-Rooted,
-Xposed Framework installed,
-Busybox installed,
-Customizable Status Bar,
-Customizable Notification Bar,
-Deodexed,
-Debloated,
-Deknoxed,
-Some Xposed Modules,
-Added SU.D Support,
-Added Custom Bootanimation,
-Now it's Zipaling,
-Added Init.D Support,
-Much more...
Installation:
Flashable Zip Version:
-Download ZIP,
-Move ZIP to SD Card or Internal Storage,
-Boot into TWRP,
-Wipe: Cache, Dalvik, Data, System,
-Flash ZIP,
-Reboot.
Backup Version:
-Download ZIP,
-Extract ZIP.
-Move TWRP folder to SD Card or Internal Storage,
-Boot into TWRP,
-Restore backup,
-Reboot.
DOWNLOAD:
-Flashable ZIP without TouchWiz (NougatLauncher):
https://drive.google.com/uc?id=0B2OyU1OLo9sjbmRuakExMXRrVGs&export=download
-Flashable ZIP with TouchWiz:
https://drive.google.com/uc?id=0B2OyU1OLo9sjc2xsSFh6RjdwX0E&export=download[/B]
-TWRP Backup without TouchWiz (NougatLauncher):
https://drive.google.com/uc?id=0B2OyU1OLo9sjQXFXa2ZSNEd4Q3M&export=download[/B]
-TWRP Backup with TouchWiz:
https://drive.google.com/uc?id=0B2OyU1OLo9sjNTJRZEZJcWFtaGs&export=download[/B]
Special Thanks to Imioł (XDA nick : Sh0peN) for lending the device.
FINALLY!
Perfect!
Hope it works fine, waiting so long..
You might need to flash GApps...
EDIT:Just flash the 5.1 GApps for OpenGApps, if it doesn't work.
does this rom have any issue
Destroyer08 said:
does this rom have any issue
Click to expand...
Click to collapse
Probably not.
At last...thank you very much
what version of recovery do you use?
melc70 said:
what version of recovery do you use?
Click to expand...
Click to collapse
TWRP 3.0.2-0
error
Destroyer08 said:
does this rom have any issue
Click to expand...
Click to collapse
error extractfork() process ended witherror 255
[email protected] said:
error extractfork() process ended witherror 255
Click to expand...
Click to collapse
idk whats wrong... do full wipe or something
[email protected] said:
error extractfork() process ended witherror 255
Click to expand...
Click to collapse
Now I'm working on 2.0 version...
adiJ5FN said:
TWRP 3.0.2-0
Click to expand...
Click to collapse
That version never existed for SMG-531F as far as I'm aware.
In addition, I followed all the instructions, but TWRP won't detect the backup.
Version : TWRP : 2.8.7
Any ideas about how to fix that ? I have been waiting for a custom ROM for two years now.
?
TWRP 2.8.7 Cant see the file when i press Restore
just create a boot backup, write the folder name and delete it if you want, rename the rom folder.
!
Perfect rom...thanks....
Can i get rid of FRP lock after flashing this rom?
Hi,
I'm new and amateur with this thing, but can someone tell me cause I own G531F with Android 5.1.1, if I do everything from this few steps posted in the first link, will I have Android 6 on my phone or do I need to do something more beside that?
Thanks!
Incognito493 said:
That version never existed for SMG-531F as far as I'm aware.
In addition, I followed all the instructions, but TWRP won't detect the backup.
Version : TWRP : 2.8.7
Any ideas about how to fix that ? I have been waiting for a custom ROM for two years now.
Click to expand...
Click to collapse
TWRP 3.0.2-0 Just flash via odin...
https://forum.xda-developers.com/attachment.php?attachmentid=3955426&d=1480666661
Important
I can't make this work, I don't have enough storage because it's too big, i got 8 gb internal and 2gb. Compress it or maybe do it as a install from twmp not restoring it.