Related
Hey Guys,
Im very new to the whole "Tablet World", I actually just purchased a T-Mobile Springboard via Ebay.
I have not yet recieved the tablet as it should arrive sometime this week, but I have been doing some research so that when it gets
here im not totally in the dark.
It is the 7"model and I believe it currently has HoneyComb installed on it, I would also assume it is locked under the Tmobile Network.
Since I live in Canada I would have to get it unlocked to be able to use it.
OK so here are all my questions...
Where can I get it unlocked, or could I do this myself somehow with software.
I want to install the most recent version of ICS ( I think its 4.0.3), would that require that I root my device?
If so can anyone send me the link to the download and instructions.
Does rooting the device cause any ill side effects? You know with the good comes some bad..lol
I was reading some people were having issues with certain things after the root.
I would love to be able to Text, make phone calls as well as browse..
is this all possible, if so how?
Thanks you guys are the smartest..
Jeff
Jamorn said:
Hey Guys,
Im very new to the whole "Tablet World", I actually just purchased a T-Mobile Springboard via Ebay.
I have not yet recieved the tablet as it should arrive sometime this week, but I have been doing some research so that when it gets
here im not totally in the dark.
It is the 7"model and I believe it currently has HoneyComb installed on it, I would also assume it is locked under the Tmobile Network.
Since I live in Canada I would have to get it unlocked to be able to use it.
OK so here are all my questions...
Where can I get it unlocked, or could I do this myself somehow with software.
I want to install the most recent version of ICS ( I think its 4.0.3), would that require that I root my device?
If so can anyone send me the link to the download and instructions.
Does rooting the device cause any ill side effects? You know with the good comes some bad..lol
I was reading some people were having issues with certain things after the root.
I would love to be able to Text, make phone calls as well as browse..
is this all possible, if so how?
Thanks you guys are the smartest..
Jeff
Click to expand...
Click to collapse
OK unlocking. First you will need your new sim. Then pop in the sim and it should bring up the sim unlock menu (it varies between 3.2 and ICS). Then load up tmobiles chat on the web site and ask to unlock the unit. They will unlock the unit as long as its paid off.
For ICS you can down load it directly from H unrooted:
http://www.huaweidevice.com/worldwi...thod=gotoProductSupport&productId=3779&tb=0);
FIRMWARE(S7-301u,Android4.0,C232B005,General_Channel)
You can download rooted roms here. they are 99% untouched, im running the OsiMood which just has some stock apps removed, and the charging icon is text instead of a battery.
You shouldnt have any issues with a rooted rom. The only issues are with the cm9,AOKP and the ones with custom kernels.
You can text,talk,data on ICS only, and only if you are not on tmobile. You would have to be on att straitTalk or any other carrier. Tmobile is the only carrier thats says no no to all 3 on a tablet, at least in the usa. Tmobile gives you a choice of text/voice, or data only.
Thanks
Thanks a lot man.. I really appreciate any help I can get, and for you guys to take time out of your day to help someone out is great.
Ok so..it still didnt arrive..(getting impatiant) lol I guess its gotta go through Customs..
hmm.. ok so your saying I can download ICS directly from Huawei, will that work fine since its actually a Springboard and not a MediaPad.
Whats the difference between ICS and ICS rooted? Do I need to root, benifits?Which would be best and why?
If I need to root where are the links for the newest ICS rooted on XDA?
I wouldnt be with Tmobile, since there isnt any in Canada..
I already bought a SIM from Petro Canada Mobility
I was told It was best for cheap plans with unlimited Browsing, the only thing was that for data only applications that run through port 80 would work. The trick was to get a proxy app through Google Play and run all your shiat though port 80.
Makes sense?
Thanks!!
Ya I sent the link to the oem vesion. Tmobile puts their own rom on it and calls it a springboard.
Root gives apps more acess such as backups, or changing ui features.
The 2 latest roms are hwmod and osimood. They are about the same.
Cant help you with the proxy things
Sent from my HUAWEI OsiMood MediaPad using Tapatalk 2
hmm
nightanole said:
Ya I sent the link to the oem vesion. Tmobile puts their own rom on it and calls it a springboard.
Root gives apps more acess such as backups, or changing ui features.
The 2 latest roms are hwmod and osimood. They are about the same.
Cant help you with the proxy things
Sent from my HUAWEI OsiMood MediaPad using Tapatalk 2
Click to expand...
Click to collapse
I went to the HUAWEI site and why would I go with HUAWEI MediaPad FIRMWARE(S7-301u,Android4.0,C232B005,General_Channel) ?
isnt there even newer ones?
there are like 5 above that one, like HUAWEI MediaPad FIRMWARE(S7-302u,Android4.0,C232B001,General Channel)
whats the difference
and how do i install it
You might want to wait a few days to see if T-Mobile makes good on their promise to push out ICS in an OTA update to the Springboard. You will be able to receive the update over wi-fi no matter which carrier you are running it on. It would save you some hassle in flashing international ROMs. Also I can vouch for the fact that the international ICS ROMs have some radio stability problems on the Springboard hardware - connections may freeze unexpectedly.
In terms of carrier compatibility in Canada:
- In theory the Springboard *should* work on Videotron, Wind and Mobilicity because it has the AWS HSPA band. Mine doesn't and I don't know why. It just won't connect with a WIND or Mobi SIM (haven't tested Videotron). It might be because I flashed an international ROM with a different radio.
- The Springboard has 1900 MHz HSPA but not 850. If you are going to use it on the Rogers network (which includes Rogers, Fido, SpeakOut and all their MVNOs), you will get a 3G/H signal in urban areas where 1900 MHz is used. In many locations though, their 3G service may be only on the 850 MHz band (which the Springboard can't access), in which case it will drop down to EDGE.
- If you try and use it on Bell, Telus or their sub-brands, you will get 3G/HSPA in urban areas, but in locales where the service is only on 850 MHz, you will get no signal at all. Bell/Telus has 3G/HSPA and LTE but no 2G/EDGE, so if you can't pick up the signal, it just drops.
S7-301u,S7-302u,S7-303u are the radio bands not firmware versions. 303u is the t mobile band, most people use the 301u. Just because firmwares came after it doesnt mean they are newer. 2 of the newer ones are just fixes for german and russian versions.
Wait for the offical tmobile version in the next few weeks, or download the version i told you.
To flash is easy:
unzip the file onto the root of your sd card
reboot the spring board
it will run the update, then tell you to remove the sd card
remove sd card
reboot system
either plug the sd card back into the spring board and remove the zip folder, or pop the sd card in a flash card reader and removed the zip folder with a pc
If you reboot the springboard again without removing the zip folder, it will reinstall again.
I just received mine today and want to try ICS. If I flash this FIRMWARE(S7-301u,Android4.0,C232B005,General_Channel) will I be still able to receive the official t-mobile version via OTA? How do I backup the stock rom?
Cant backup the original rom. Cant get the OTA if you flash the factory(non tmobile) ICS rom.
Sorry thats how it rolls. If we are slightly lucky someone will grab the OTA for us flashers and we will be set. Or H will release a 303 firmware to work with all the tmobile channels.
nightanole said:
Cant backup the original rom. Cant get the OTA if you flash the factory(non tmobile) ICS rom.
Sorry thats how it rolls. If we are slightly lucky someone will grab the OTA for us flashers and we will be set. Or H will release a 303 firmware to work with all the tmobile channels.
Click to expand...
Click to collapse
Thanks for the heads up. If I gone ahead and flash FIRMWARE(S7-301u,Android4.0,C232B005,General_Channel) will I still be able to use 4G/3G for tmobile? I understand that I can also use gsm voice/text with this firmware is that correct?
voice/text/data has to do with the carrier. att lets you do it, tmobile wont, its not about the firmware.
In your area you will either flash the 301 or the 302 firmware. They are the same other than what band they run in. They havent comes out with a 303 factory firmware yet.
Hmm
nightanole said:
voice/text/data has to do with the carrier. att lets you do it, tmobile wont, its not about the firmware.
In your area you will either flash the 301 or the 302 firmware. They are the same other than what band they run in. They havent comes out with a 303 factory firmware yet.
Click to expand...
Click to collapse
Ok.. Well I have had the device a couple days now and just been fooling around with it.
Now I would like to get this all in motion.
My question is, If I go with ICS from HUAWEI website, can I still root the device? and do I do that after or before.
and how?
I think I need to root it to run a Proxy program to run everything through port 80, which is what Petro Canada Mobility(Rogers) leaves open on Unlimited Browsing Plan.
Also in the instruction, you said put it in the "root" , what you mean by root, and thats on the micro sd right?
Jamorn said:
Ok.. Well I have had the device a couple days now and just been fooling around with it.
Now I would like to get this all in motion.
My question is, If I go with ICS from HUAWEI website, can I still root the device? and do I do that after or before.
and how?
Click to expand...
Click to collapse
Go to the huawei mediapad root thread on the development section, go to the link in the post number 28 (to modaco). You root it after updating the pad.
wtf
Ok well the Huawei site is F****** useless..
the download is terrible, goes superslow, and then when you try to extract to F: the **** is all corrupted..PDF doesnt work either
Jamorn said:
Ok well the Huawei site is F****** useless..
the download is terrible, goes superslow, and then when you try to extract to F: the **** is all corrupted..PDF doesnt work either
Click to expand...
Click to collapse
I don't know the current situation (since they revamped the site), but I've never got corrupted download. The last time I download stuff from there was when the ics source came out.
Sent from my HTC Glacier using Tapatalk 2
??
rurou said:
I don't know the current situation (since they revamped the site), but I've never got corrupted download. The last time I download stuff from there was when the ics source came out.
Sent from my HTC Glacier using Tapatalk 2
Click to expand...
Click to collapse
This Is starting to really bother me.. I tried like 4 sources and everyone boots and then stops durring update and says FAIL.
WTF?
I have failed once when trying to install a new firmware which turns out to be corrupted download (the firmware was one of those pre-rooted firmware). I also read someone failed many times and turns out the problem is in their sd card. If you have a spare sd card, you probably can try putting the firmware there or if you don't mind formatting your current card then you can also try that.
Sent from my HTC Glacier using Tapatalk 2
UPDATE
rurou said:
I have failed once when trying to install a new firmware which turns out to be corrupted download (the firmware was one of those pre-rooted firmware). I also read someone failed many times and turns out the problem is in their sd card. If you have a spare sd card, you probably can try putting the firmware there or if you don't mind formatting your current card then you can also try that.
Sent from my HTC Glacier using Tapatalk 2
Click to expand...
Click to collapse
Ok so here is the update.
I got 301u ICS General up and running, just curious on why I installed 301u over 302u. Which is better for my region (Montreal , QC) would be on Rogers network?
Because I have been having issues getting connected to network, wondering if I maybe installed wrong firmware.
Anyway, next step is to root.
1) Download Huawei MediaPad ROOT ICS Android 4.0.x.rar
2) Connect the tablet to your PC, install the driver.
3) In the settings of the tablet enable debugging by USB .
4) Unpack the archive.
5) Run the Install Root.cmd wait three reboots.
Ok, I downloaded the file to my Laptop, Im just confused on step 4 and 5 so I have stopped until I find out more informaion because I do not want do to it wrong.
"Unpack the Archive"? could someone maybe expand on this limited explanation. Do I extract the file to desktop or directly onto the tablet and same with running Root.cmd where do I run it from?
can someone please maybe explain the steps better then they were, I ve seen better instructions written on a carton of milk on how to open it, then this.
Jamorn said:
Ok so here is the update.
I got 301u ICS General up and running, just curious on why I installed 301u over 302u. Which is better for my region (Montreal , QC) would be on Rogers network?
Because I have been having issues getting connected to network, wondering if I maybe installed wrong firmware.
"Unpack the Archive"? could someone maybe expand on this limited explanation. Do I extract the file to desktop or directly onto the tablet and same with running Root.cmd where do I run it from?
can someone please maybe explain the steps better then they were, I ve seen better instructions written on a carton of milk on how to open it, then this.
Click to expand...
Click to collapse
I don't know about the better firmware, but since I'm using 301u pad with 301u firmware I haven't got any problem.
As for rooting.. Step 4 is extracting the file in your pc/desktop. Step 5 is running the install root.cmd while the pad connected to the pc.
please help me.
I have downloaded the firmware 4.0 general version then when I instal it but fail then i waitd for a second i dnt pull out the sdcrd then suddenly got battery low?when i bootd the phne it goes the message les than 30% it stucks there do i have to install the 3.2 again? Even fail to install the update of ics?does it mean that my 3.2 os wiped out??pls help me
When I found the Darth Stalker multi-carrier ROM for the Galaxy S4, I was very happy. It works very well, and has allowed me to take my Verizon Galaxy S4 (i545 version) -- that wouldn't work on a US GSM carrier -- and put it on a $60 AT&T "GoPhone" BYOD plan. This saved me about $80 a month since I have 2 phones on the account.
Unfortunately, soon after flashing this ROM, I found out that my WiFi could not be turned on. After some research, I found that there were some modules not included in the ROM that are needed on the i545 variant for WiFi to work properly. I was able to install these easily.
Unfortunately, this ROM will **NOT** work alongside the stock ROM through SafeStrap; it will flash in a ROM slot just fine, but it won't boot at all. This is thanks to the antics of Verizon developers in Verizon's constant attempt to lock their phones to their service. But all is not lost! This just means that you must flash this ROM over the stock ROM.
I have put together the following guide, based on my own experience, that will allow you to properly backup your stock rooted phone completely, properly flash the Darth Stalker ROM over the stock ROM, and make your WiFi work properly. I am using this device & this ROM as my "daily driver", and it works flawlessly.
If, for some reason, things go wrong and you manage to soft-brick your phone, you can re-flash the original MI1 ROM by following the procedures in this thread --> [ http://forum.xda-developers.com/showthread.php?t=2301259 ], which also lists download links for the Odin image file and all tools mentioned. Once your phone is recovered, simply re-root it and install SafeStrap in order to completely restore it to pre-flash condition (right down to the wallpaper) using the nandroid backup i will show you how to create.
INSTRUCTIONS TO PROPERLY FLASH DARTH STALKER v9 ON THE i545 VERIZON/ GALAXY S4:
1. This guide assumes that you have brought your Galaxy S4 up to the I545VRUDMI1 baseband version. If you have upgraded past that, there is no way to do this at the present time.
2. Follow the procedute outlined in the this Forum thread --> [ http://forum.xda-developers.com/showthread.php?t=2487142 ] to "ROOT" your Galaxy S4.
3. Once you have successfully rooted your Galaxy S4, you can now begin to convert your phone over to one of these GSM carriers, and use a much less expensive GoPhone or StraightTalk SIM card.
4. Go here --> [ http://forum.xda-developers.com/devdb/project/dl/?id=991 ] to download SafeStrap custom recovery, version 3.62. Once you have downloaded it, copy it to your phone's SD card.
5. Go here --> [ http://forum.xda-developers.com/showthread.php?t=2292054 ] to download the Darth Stalker ROM that supports multi-carrier operation very well. Once you have downloaded it, copy it to your phone's SD card.
6. Go here --> [ http://forum.xda-developers.com/devdb/project/dl/?id=1342 ] to download the modules that must be added to make WiFi work on the I545 version of the Galaxy S4; the developer did not add them into version 9 of Darth Stalker, but it is easy to do. Once you have downloaded it, copy it to your phone's SD card.
7. On your phone, tap your way to "Settings -> Security -> Unknown Sources", and make sure that it is checked/ enabled.
8. Now that you have all of these ZIP files on your phone's SD card, you have allowed it to install from the SD card, and your phone has been successfully rooted, bring up your phone's file manager.
9. Navigate to your external SD card, and tap on the green shield icon to install SafeStrap. Once it finishes installing, tap "Open", then tap "Install Recovery". Once it is finished, tap the new button for "Reboot Into Recovery" and let your phone reboot into SafeStrap Recovery.
10. Once you are in SafeStrap, tap on "Backup"; make sure that "Data", "Cache" and "System" are all checked, and that the storage location is set for your external SD card (DO NOT PUT THIS BACKUP ON YOUR INTERNAL STORAGE!!!). Then swipe to start the backup. This is referred to as a "nandroid backup" and you can recover your entire phone as it exists at that point from it. Let it work -- it should take around 10-15 minutes.
11. Once you have your backup done, tap "Back" to return to the main menu. You will see, in red at the top of the window, that you are working with the Stock Rom slot -- DO NOT CHANGE IT -- that is what we intend to do.
12. From the main menu, tap "Install", then select your external SD card in the Storage field; then scroll down to "DARTHSTALKER_S4_V9.zip" and tap on it. Swipe the button to begin flashing this ROM.
13. In a few seconds, the Aroma Installer will start up which will allow you to specify what features you want in your ROM. Make sure you follow these "bullet points" from the developer, jovy23 [ http://forum.xda-developers.com/member.php?u=4454815 ] -- it matters!
* Choose The "Full Wipe" Method.
* Choose Any Of The Apps You Want.
* Now Install The Rom Until Its Finished.
* The Aroma Installer Will Then Reboot Your Device.
* Once Rebooted And In The Setup Wizard, DO NOT Touch For 5 Minutes!
* After 5 Minutes, Reboot The Phone... ALMOST DONE!
14. Once you have finished installation, and your phone is working (all except WiFi), you will need to re-install SafeStrap from your SD card. This is a quirk of the stock MI1 bootloader, but can be worked around. Simply re-install SafeStrap when it disappears. Once you have SafeStrap Recovery installed again, reboot your phone into recovery directly from SafeStrap -- DO NOT USE THE PHONE REBOOT MENU TO REBOOT INTO RECOVERY.
15. You will repeat the process you used in originally flashing the ROM, but instead, this time you will flash the file jfltevzw-MI1-modules.zip that is on your external SD card.
16. When flashing is done, tap on the "Wipe Cache/Dalvik" button to clean up and make the kernel recognize the new modules when it loads.
17. Reboot your phone.
18. Once your phone comes up, you will now have WiFi. Enjoy!
Warning: I cannot be held responsible for anything you do to your phone. Anything you do to your phone is your responsibility. I am simply giving your the benefit of my experience in this guide, and I cannot help it if you don't follow it exactly.
Mms and everything works fine?
Sent From The Future
killajoe said:
Mms and everything works fine?
Sent From The Future
Click to expand...
Click to collapse
Yep -- everything works great...
budding_developer said:
Yep -- everything works great...
Click to expand...
Click to collapse
My stock TW VZW Galaxy S4 works wonderfully on T-mobile and AT&T out of the box with a few APN settings added.
joderme said:
My stock TW VZW Galaxy S4 works wonderfully on T-mobile and AT&T out of the box with a few APN settings added.
Click to expand...
Click to collapse
That's curious -- mine would show the APN's with an activated SIM, but no signal whatsoever. This is what I had to do to use anything other than Verizon's CDMA here in the US. I was told that Verizon locks out the US GSM frequencies in their kernel so that you can use GSM outside of the country only.
budding_developer said:
That's curious -- mine would show the APN's with an activated SIM, but no signal whatsoever. This is what I had to do to use anything other than Verizon's CDMA here in the US. I was told that Verizon locks out the US GSM frequencies in their kernel so that you can use GSM outside of the country only.
Click to expand...
Click to collapse
I wonder if something changed in the later updates. As of MDK/ME7 it was working. I was able to get AT&T HSDPA after putting in the APN data. Voice worked without any of that.
As a part of their 700 Mhz spectrum agreement they had to be sim unlocked. My wife is using a VZW iPhone with an AT&T sim without problem. Did you see any sort of signal when you had the sim in (no data indicators, just signal bars)?
Anyone try stock MDK ROM and MJ7 Modem on ATT or Prepaid ATT with LTE active? Is this possible? In service mode I see both Band 17 and Band 20 as new selectables when updated to the MJ7 Modem
My 2 cents
unlocked out of the box
the sch-i545 is unlocked out of the box. no mod required. the only issue i have with AT&T is caller ID formatting has a + in front. Otherwise once with APN added, it works fine and able to get HSPA+
joderme said:
I wonder if something changed in the later updates. As of MDK/ME7 it was working. I was able to get AT&T HSDPA after putting in the APN data. Voice worked without any of that.
As a part of their 700 Mhz spectrum agreement they had to be sim unlocked. My wife is using a VZW iPhone with an AT&T sim without problem. Did you see any sort of signal when you had the sim in (no data indicators, just signal bars)?
Click to expand...
Click to collapse
No -- no bars at all -- just an empty triangle. I would get the occasional flashing small triangle just above the signal indicator (searching for data, I believe), but the bars would never show. About half the time, I would get a red "NO" circle over the indicator, too.
As soon as I flashed Darth Stalker, though, it glommed onto signal & data lickety-split. I'm happy with it now -- in fact, I did a second one and sent it to my girlfriend in New York.
equake said:
Anyone try stock MDK ROM and MJ7 Modem on ATT or Prepaid ATT with LTE active? Is this possible? In service mode I see both Band 17 and Band 20 as new selectables when updated to the MJ7 Modem
My 2 cents
Click to expand...
Click to collapse
Before I left Verizon, while it was still on MI1, I flashed the MJ7 radios -- it virtually killed my transfer speeds. Went from almost 20 mbps to less than 10.
I've been through allot of this trial and error as I've always used GSM services in the past and before my S4 used a Verizon Note 2 with Straight Talk "AT&T". I got lucky and got an MDK and I've helped a friend with an ME7 on same service.. so I've worked with them both. What I found right away was that the Verizon CyanogenMod builds do not work properly with GSM phone service properly.. then I got a tip and made a custom VZW loki'd ATT recovery and started flashing the i337 CM ROMs and everything worked perfect from that point on.. I still have to do some work swapping files around when I want to run custom kernels.. not sure why most of the devs decide to pre-patch the kernel images instead of loki patching them during the recovery flash process as this would make a universal VZW/ATT kernel.. but it works non-the-less. As for the ME7 i545, the stock rom worked as long as you selected global mode but you'd still get the non-verizon sim error. Used SS with the GE 4.2.2 ROM and it works perfect with his GSM service.
budding_developer said:
Before I left Verizon, while it was still on MI1, I flashed the MJ7 radios -- it virtually killed my transfer speeds. Went from almost 20 mbps to less than 10.
Click to expand...
Click to collapse
Is this on LTE or did it drop back down to HSPA+?
equake said:
Is this on LTE or did it drop back down to HSPA+?
Click to expand...
Click to collapse
The radio flashing happened while it was still a CDMA/ Verizon phone, before I flashed Darth Stalker. It really cut my LTE speed. Flashed the original MI1 radios, and I got the speed back.
Now, with Darth Stalker, I am on HSPAP:15 or HSPA:11 but the indicator says 4g -- I get comparable throughput as I did on Verizon.
Anyone getting LTE on ATT or prepaid ATT like goPhone, StraightTalk, AIO with the MJ7 radio?
Guys I actually have un-used AT&T go phone sim card I need it for someone to simply remove activation on iPhone. I put it in my S4 VZW and it showed AT&T as service provide so you don't need to mess with custom roms.
patt2k said:
Guys I actually have un-used AT&T go phone sim card I need it for someone to simply remove activation on iPhone. I put it in my S4 VZW and it showed AT&T as service provide so you don't need to mess with custom roms.
Click to expand...
Click to collapse
Are you getting LTE with the goPhone SIM?
equake said:
Are you getting LTE with the goPhone SIM?
Click to expand...
Click to collapse
Don't know never activated it it was only used for few seconds with iPhone.
If it's a micro sim chances are it's not lte enabled.
Sent from my SCH-I545 using Tapatalk
CDMA SIM card
I have a CDMA SIM for 1x and EVDO here in India, we have been using GSM after the unlocking without any extra APN settings. Since the author has mentioned other networks, will this procedure help in using other CDMA SIMs in Verizon S4?
dr.faramroze said:
I have a CDMA SIM for 1x and EVDO here in India, we have been using GSM after the unlocking without any extra APN settings. Since the author has mentioned other networks, will this procedure help in using other CDMA SIMs in Verizon S4?
Click to expand...
Click to collapse
No, I think you misunderstood the nature of my original post. It was meant to illustrate how to get away from the high phone bills with Verizon here in the US -- since Verizon locks out all GSM US carriers in the RIL, you MUST replace the Verizon stock ROM in order to be able to use the Verizon phone on any US carrier which uses GSM technology.
You can still use foreign GSM carriers with the stock Verizon firmware, but there is no known method to "open up" the Verizon stock ROM for the use of the phone on US carriers on GSM -- many have tried, and everyone has failed. The only viable option is to completely replace the stock ROM and kernel -- which was the purpose of my "tutorial" here.
If you are in India, and you have a Verizon CDMA S4, you simply need to pop a SIM from a foreign GSM carrier into it in order to use GSM there -- you will NOT be able to use GSM here in the US, though, because of Verizon's lock-out logic contained in the RIL (Radio Interface Layer). I am not sure about the use of the Verizon US CDMA phone on foreign CDMA carriers, though.
Hi:
Newbie here, so please bear with me. I am fairly techie, but never really worked on phones (I'm a Windows / Network engineer by trade).
I had an S6 Edge on the Vodafone network, and live in an area with poor cell coverage. So, I fully took advantage of wifi calling. I've upgraded to the S8 (gorgeous phone, BTW) so I gave the device to my missus, who made the mistake of buying an EE iPhone, and hates it.
We unlocked the phone to the EE network, but the wifi calling option has vanished, and I've been told that this is by design, as only phone purchased directly from EE have wifi calling enabled.
Been looking around, and have seen that if we root the phone and flash it with an EE image, then things should be hunky dory. However, having never undertaken a project like this on a phone, I'm seeking some guidance, as I don't want to completely brick the device.
Are there any idiot-proof step-by-step guides on here to do this?
Cheers in Advance
Steevi93 said:
Hi:
Newbie here, so please bear with me. I am fairly techie, but never really worked on phones (I'm a Windows / Network engineer by trade).
I had an S6 Edge on the Vodafone network, and live in an area with poor cell coverage. So, I fully took advantage of wifi calling. I've upgraded to the S8 (gorgeous phone, BTW) so I gave the device to my missus, who made the mistake of buying an EE iPhone, and hates it.
We unlocked the phone to the EE network, but the wifi calling option has vanished, and I've been told that this is by design, as only phone purchased directly from EE have wifi calling enabled.
Been looking around, and have seen that if we root the phone and flash it with an EE image, then things should be hunky dory. However, having never undertaken a project like this on a phone, I'm seeking some guidance, as I don't want to completely brick the device.
Are there any idiot-proof step-by-step guides on here to do this?
Cheers in Advance
Click to expand...
Click to collapse
It's actually a lot simpler than you think. No need to root all you have to do is flash the EE firmware through Odin (Samsung flashing tool) and voila, EE Wi-Fi calling will appear. Also volte will be available too.
If you need step by step I can help.
I need model number and android version and I can link you the firmware.
callumbr1 said:
It's actually a lot simpler than you think. No need to root all you have to do is flash the EE firmware through Odin (Samsung flashing tool) and voila, EE Wi-Fi calling will appear. Also volte will be available too.
If you need step by step I can help.
I need model number and android version and I can link you the firmware.
Click to expand...
Click to collapse
Hey dude.... after trolling through this forum some more, I was able to find what I needed to flash the firmware onto the device... However, Wi-Fi calling (as an option) does not seem to appear yet, but I wonder if that is due to the lack of SIM card (wife put it back in her iPhone, so I could sort this at work.
If I've downloaded the wrong stuff, then I'm happy to redo.
Model Number: SM-G925F
Android Version: 7.0
Baseband Version: G925FXXU5EQF1
Steevi93 said:
Hey dude.... after trolling through this forum some more, I was able to find what I needed to flash the firmware onto the device... However, Wi-Fi calling (as an option) does not seem to appear yet, but I wonder if that is due to the lack of SIM card (wife put it back in her iPhone, so I could sort this at work.
If I've downloaded the wrong stuff, then I'm happy to redo.
Model Number: SM-G925F
Android Version: 7.0
Baseband Version: G925FXXU5EQF1
Click to expand...
Click to collapse
When you downloaded the firmware was there 5 files in the zip? Or just the one AP file?
Did you look in phone app > settings then scroll to bottom for Wi-Fi calling option? If you flashed an EE firmware it should be there mate.
As well as the EE firmware you need to have the EE csc. You have this csc, EVR?
callumbr1 said:
When you downloaded the firmware was there 5 files in the zip? Or just the one AP file?
Did you look in phone app > settings then scroll to bottom for Wi-Fi calling option? If you flashed an EE firmware it should be there mate.
As well as the EE firmware you need to have the EE csc. You have this csc, EVR?
Click to expand...
Click to collapse
Hi... There was only the one file (the AP file, I believe)_ and no, when I checked the phone settings, wifi calling was not showing as an option. If you have a link to the correct firmware, I'm happy to reflash the phone, as I have everything here with me at work.
Steevi93 said:
Hi... There was only the one file (the AP file, I believe)_ and no, when I checked the phone settings, wifi calling was not showing as an option. If you have a link to the correct firmware, I'm happy to reflash the phone, as I have everything here with me at work.
Click to expand...
Click to collapse
Flash this version from here
http://updato.com/firmware-archive-select-model?record=75717719616711E7963AFA163EE8F90B
The version you flashed previous was PRT Poland version.
Flash the one I posted it is UK EVR and then you will have Wi-Fi calling.
callumbr1 said:
Flash this version from here
http://updato.com/firmware-archive-select-model?record=75717719616711E7963AFA163EE8F90B
The version you flashed previous was PRT Poland version.
Flash the one I posted it is UK EVR and then you will have Wi-Fi calling.
Click to expand...
Click to collapse
Thanks.... I will give that a go when I get home. Cheers.
Steevi93 said:
Thanks.... I will give that a go when I get home. Cheers.
Click to expand...
Click to collapse
No problem
Steevi93 said:
Thanks.... I will give that a go when I get home. Cheers.
Click to expand...
Click to collapse
If by chance you encounter hidden.img fail in Odin don't panic.
Just unpack the firmware and remove the hidden.img. repack and flash again.
callumbr1 said:
If by chance you encounter hidden.img fail in Odin don't panic.
Just unpack the firmware and remove the hidden.img. repack and flash again.
Click to expand...
Click to collapse
Heya.... no such "issues" so to speak. Just one where my baby kicked the USB cable, causing a brief disconnect during the flashing process. This, of course, sent me into a spiral of panic because the entire phone crashed, with errors, recovery messages invoking Smart Switch, and the like. However, restarting the phone and connecting it to Odin completely recovered the phone.
Initially, the flashing worked, but it didn't enabled Wi-Fi calling, so I reset the phone back to factory settings, flashed it again and voila!!!! Worked like a charm! Then restored the backup from Smart Switch that I made yesterday, and the missus now has a full functional EE phone with Wi-Fi calling.
Thanks very much for your help mate.... you're a legend.
I'm gonna keep Odin, as it seems like a great recovery tool as well. :good:
Steevi93 said:
Heya.... no such "issues" so to speak. Just one where my baby kicked the USB cable, causing a brief disconnect during the flashing process. This, of course, sent me into a spiral of panic because the entire phone crashed, with errors, recovery messages invoking Smart Switch, and the like. However, restarting the phone and connecting it to Odin completely recovered the phone.
Initially, the flashing worked, but it didn't enabled Wi-Fi calling, so I reset the phone back to factory settings, flashed it again and voila!!!! Worked like a charm! Then restored the backup from Smart Switch that I made yesterday, and the missus now has a full functional EE phone with Wi-Fi calling.
Thanks very much for your help mate.... you're a legend.
I'm gonna keep Odin, as it seems like a great recovery tool as well. :good:
Click to expand...
Click to collapse
Hey buddy,
Brilliant news mate enjoy. Glad I could help you.
Yeah keep Odin as it's always very useful in times of need. However you shouldn't have any issues from now :good:
Thanks the posts if you can mate :good:
hi i have a verizon tab s6 sm-t867v(lte version) the stock rom does not let you use phone app to do calls and messages app dont work. all the calls or messages should go throug the verizon propritory messages+ app ,where you need to add verizon number. . and the tablet is unlocked to any career. . I DONT WANT TO ROOT THE DEVICE. i did a career switch for my note 8 from att to tmobile without rooting so i thought i can do the same to tab s6. i have few questions
1. is there a way i can swap for another career rom
2. can i flash international rom just throug odin so that i dont deal with verizon bloatware.
can any one point me to the files and the thread.
is there a way i can use calling and texting on without going throug messages+ app. thanks for the help in advance. i am sorry if anythin i ask is silly. peace
shiva49 said:
hi i have a verizon tab s6 sm-t867v(lte version) the stock rom does not let you use phone app to do calls and messages app dont work. all the calls or messages should go throug the verizon propritory messages+ app ,where you need to add verizon number. . and the tablet is unlocked to any career. . I DONT WANT TO ROOT THE DEVICE. i did a career switch for my note 8 from att to tmobile without rooting so i thought i can do the same to tab s6. i have few questions
1. is there a way i can swap for another career rom
2. can i flash international rom just throug odin so that i dont deal with verizon bloatware.
can any one point me to the files and the thread.
is there a way i can use calling and texting on without going throug messages+ app. thanks for the help in advance. i am sorry if anythin i ask is silly. peace
Click to expand...
Click to collapse
Yes you can switch the firmware on the sm-t867v from Verizon to TMobile or Sprint. It keeps the bootloader locked down so root is still impossible but since you are not looking to root it just switching the firmware version should work just fine. I personally have metro pcs and their $15 unlimited tablet data plan on mine and I switched my firmware to TMobile so I could pick up the LTE bands it would not connect to with the Verizon firmware. All you need to do is download the modified Odin 3.14 and the firmware of the carrier you wish to switch to. It HAS to have the same base model. For example I went from the SM-T867V firmware and flashed the SM-T867U firmware to the device. So your firmware choice absolutely MUST have the SM-T867 in the beginning of it. Any other firmware will most likely brick your device if Odin even allows it to flash. The thing that makes the difference between Verizon and TMobile is the user userdata file. You must flash it with the rest of the firmware files, So BL, AP, CP, CSC, and Userdata. Don't worry, the stock firmware will come with the userdata file. Also its best that you don't flash the CSC-Home file but flash the regular CSC file as the home one will not delete your data and its probably best to do a full wipe when switching firmwares, so make sure you back up anything you don't wish to lose. When the flashing is finished it will boot and instead of the white screen with big red circle for Verizon you will get a pink TMobile screen and it will be model SM-T867U now. All OTA updates will still work without problem and you will get a functional dial pad which works for all the secret menus and all that fun stuff. BTW, I take absolutely no responsibility if for some reason it messes up or bricks your tab s6 lte. Goodluck and enjoy your non Verizon tablet.
Tofor said:
Yes you can switch the firmware on the sm-t867v from Verizon to TMobile or Sprint. It keeps the bootloader locked down so root is still impossible but since you are not looking to root it just switching the firmware version should work just fine. I personally have metro pcs and their $15 unlimited tablet data plan on mine and I switched my firmware to TMobile so I could pick up the LTE bands it would not connect to with the Verizon firmware. All you need to do is download the modified Odin 3.14 and the firmware of the carrier you wish to switch to. It HAS to have the same base model. For example I went from the SM-T867V firmware and flashed the SM-T867U firmware to the device. So your firmware choice absolutely MUST have the SM-T867 in the beginning of it. Any other firmware will most likely brick your device if Odin even allows it to flash. The thing that makes the difference between Verizon and TMobile is the user userdata file. You must flash it with the rest of the firmware files, So BL, AP, CP, CSC, and Userdata. Don't worry, the stock firmware will come with the userdata file. Also its best that you don't flash the CSC-Home file but flash the regular CSC file as the home one will not delete your data and its probably best to do a full wipe when switching firmwares, so make sure you back up anything you don't wish to lose. When the flashing is finished it will boot and instead of the white screen with big red circle for Verizon you will get a pink TMobile screen and it will be model SM-T867U now. All OTA updates will still work without problem and you will get a functional dial pad which works for all the secret menus and all that fun stuff. BTW, I take absolutely no responsibility if for some reason it messes up or bricks your tab s6 lte. Goodluck and enjoy your non Verizon tablet.
Click to expand...
Click to collapse
Followed instruction and successfully changed from V to T-mobile. Thankyou!
geoffwdixon said:
Followed instruction and successfully changed from V to T-mobile. Thankyou!
Click to expand...
Click to collapse
I'm glad it worked for you without any major issues. This was the first thread I've given any real instruction on. Hope your tab continues to work perfectly. I broke the screen on mine so the only thing it's really used for is an android PC. Thank God for the Tab S6`s ability to output video so easily and the Samsung DEX software.
Does anyone know how to downgrade the firmware on the 8 flip? I updated my firmware on Sunday and my phone won't connect to my service provider now. Sim card works in other phones and the only thing that changed was updating from v.110 to v.119.
Any suggestions to fix the issue or downgrade the firmware will be helpful.
Wtxr3dn3ck said:
Does anyone know how to downgrade the firmware on the 8 flip? I updated my firmware on Sunday and my phone won't connect to my service provider now. Sim card works in other phones and the only thing that changed was updating from v.110 to v.119.
Any suggestions to fix the issue or downgrade the firmware will be helpful.
Click to expand...
Click to collapse
Try to download the firmware zip from the support page and flash it in recovery
Tried to update from SD card in recovery. Got no file or directory. Failed to mount SD card and installation aborted.
OK so I was able to use the Android 12 to Android 11 update from Asus to move back the firmware. Popped in the sim,, no luck.
It weird considering the Sim works fine on a pixel 2 xl. Carrier device blacklist maybe?
I have a similar issue as well. Wifi and Bluetooth on my zenfone 8 flip stopped working. I've unlocked the bootloader and rooted the phone. I read somewhere that mac.txt should be found in <root>/config/wifi/ but it is not there. I recently updated OTA when this happened. I cannot seem to flash rom via adb as well.
I was hoping to use TWRP but it only support Zenfone 8. Zenfone 8 flip is not on the list (yet).
kheldar0401 said:
I have a similar issue as well. Wifi and Bluetooth on my zenfone 8 flip stopped working. I've unlocked the bootloader and rooted the phone. I read somewhere that mac.txt should be found in <root>/config/wifi/ but it is not there. I recently updated OTA when this happened. I cannot seem to flash rom via adb as well.
I was hoping to use TWRP but it only support Zenfone 8. Zenfone 8 flip is not on the list (yet).
Click to expand...
Click to collapse
What did you use to get your boot.img? I may also have the files. I think what I used gave all the files from the update patch.
It turns out my problem was service provider. I have decided my IMEI was black listed by AT&T. I use MVNO and straight talk cut my service, the following weeks I noticed that other AT&T MVNOs (Boost, US cellular, etc.) were not allowing my IMEI even though they did the week before. I switched to Mint (T-Mobile MVNO) seems to work fine.
Wtxr3dn3ck said:
What did you use to get your boot.img? I may also have the files. I think what I used gave all the files from the update patch.
It turns out my problem was service provider. I have decided my IMEI was black listed by AT&T. I use MVNO and straight talk cut my service, the following weeks I noticed that other AT&T MVNOs (Boost, US cellular, etc.) were not allowing my IMEI even though they did the week before. I switched to Mint (T-Mobile MVNO) seems to work fine.
Click to expand...
Click to collapse
I used payload_dumper from github. Installed python on my PC and ran it
So I used the payload dumper go. Someone made an all in one script that dumps an image of everything so I have a Bluetooth and modem images. Try that. It's a script that runs on its own, for some reason I was having issues with the python script so the .exe was just easier than troubleshooting.