was trying to root my phone using this guide
http://galaxys3root.com/galaxy-s3-root/how-to-root-galaxy-s3-on-android-4-34-4-2-new/
after following the steps i wasn't able to open cwm or the stock recovery i tried taking off the battery after doing the odin process again but no luck any ideas?
Try CF Autoroot (use search function).
If it doesn't succeed, flash latest 4.3 firmware from sammobile.com, then Autoroot.
I think im gonna postpone the rooting for now so how do I remove the failed cwm I tried flashing a stock recovery but its stuck at pit mapping
Also by flashing firmware (whole ROM)
are there other methods than flashing a whole rom?
are you using the latest odin? if youre using 10.x then try using a lower version which would of been compatible with your model when it was in its prime.
Odin v9.x or 7.x for example.
this is a good automated too with many option and much information all up to date within the program its for pc just connect phone via usb.
http://www.skipsoft.net/?page_id=1197
used it on galaxy s4/5/6 when ran into problems.
im using odin3 v1.85 and the international gt i19300 stock recovery do i have to unzip it first?
thats a very old version of odin. try updating. go to odin official website or search xda
Use odin to flash cfautoroot and you'll be rooted. Simple as.
Connect phone to pc via usb. Open odin, click pda, find cfautoroot file, click ok, click start. Phone will reboot, red text, reboot, Optimise apps.. Done.
You can mess with roms or recoveries to your hearts content.
Sent from my HTC One M9 using Tapatalk
im running on android 4.4.2
odin mode says this:
Current Binary: Custom
System Status: Official
Qualcomm Secureboot: Enable
Warranty Bit: 1
Bootloader RP SWREV: 3
is that normal?
Paul Kellerman said:
im running on android 4.4.2
odin mode says this:
Current Binary: Custom
System Status: Official
Qualcomm Secureboot: Enable
Warranty Bit: 1
Bootloader RP SWREV: 3
is that normal?
Click to expand...
Click to collapse
Stop right there. You do not have the international version.
I believe you have the verizon variant, i747?. The international variant doesn't have qualcomm chips nor bootloader security.
Do not flash anything I9300 as you will brick your device so i have removed the link i gave.
The warranty bit has been triggered but it means nothing if your not selling it to a business.
The qualcomm security bit is basically knox but from what I've read this should stop odin from allowing a flash. If it does there is supposed to be a way around it but seeing as I've never encountered a usa device (i live in the uk) i cannot advise further on that, but maybe someone else can?.
Otherwise it looks normal and could already have the said security patched to allow odin flashes. Otherwise you're flashing via recovery but be careful, you need to confirm your variant first!!.
Sent from my HTC One M9 using Tapatalk
looks like i wont be getting root access anytime soon i don know anything about the variant since this phone was given to me by my uncle in dubai i hope someone helps me out with this
First of all check in the settings of your phone if it says it is I9300, if it is not, you are not in the proper forum. Then we can move forward.
it says model number samsung gt I9300
Related
Hello!
My Samsung Galaxy sIII GT-I9300 got stock on the boot logo...i don't know how
I've been using my phone since 7 months, i even rooted it 5 months ago without any problem. I never changed its ROM, it's still running on ICS. When the Samsung official software notification came on my phone, i would postpone it to 3 hours later everytime. One day before my phone bricked, it would boot several times consecutively. Yesterday morning, my phone was fine, the alarm rung, i even checked my whatsapp, in the afternoon, i found it on the boot logo, i waited for the Samsung logo to appear but it would just stay there. I'm able to go in download mode, it says:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
It won't go any further, no buttons apart from the power button would work.
I tried to go on the Samsung updates website to look for a firmware but i could not find my country (Mauritius).
Is the the "Region" important while choosing a firmware or can i just choose a firmware for any other country?
I tried installing I9300XXEMC3_I9300NEEEMC1_I9300XXEMB6_HOME.tar.md5 on my phone through Odin but it would fail on the very first stage (see attachment). I guess this file was not right...
I tried downloading other OMEGA WinRar files, but it contained only folders and other stuffs, i could not find any file with .tar extension.
Can somebody please tell me how do i fix my phone?
Please send me download links of .tar.md5 files and instruct me how to install it. I'll be very grateful to you
i don't mind loosing all my pictures, apps, songs and other files on my phone. I just want my phone to be repaired because i'll need it soon.
Thank you for answering.
It sounds like sudden death check the stickied thread in general, think it's a warranty job good luck
Sent from my GT-I9300 using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=2240291
ouch
i had this problem,
heres how i sorted mine out,
i went to sammobile.com and downloaded .sammobile.com/firmwares/1/?model=GT-I9300&pcode=O2U#firmware[/url]
take both sim and sd card out the full factory wipe,
then installed it via odin (make sure you have latest version)...it might have been luck for me but its how it worked
fingers crossed
let me know if its worked
By reading your post and the info presented, looks like you are in download mode instead of recovery, that's why no other key but power will work. In your screenshot of odin looks for me that you don't have the usb drivers installed correctly or the phone is not in download mode.
Good luck
Regards
[email protected]
You probably have the Sudden death :/ You should've updated it to jelly bean... Only way is to change the motherboard , read the sticky in general section for more info.
Sent from my GT-I9300 using xda app-developers app
Gowtamee said:
Hello!
My Samsung Galaxy sIII GT-I9300 got stock on the boot logo...i don't know how
I've been using my phone since 7 months, i even rooted it 5 months ago without any problem. I never changed its ROM, it's still running on ICS. When the Samsung official software notification came on my phone, i would postpone it to 3 hours later everytime. One day before my phone bricked, it would boot several times consecutively. Yesterday morning, my phone was fine, the alarm rung, i even checked my whatsapp, in the afternoon, i found it on the boot logo, i waited for the Samsung logo to appear but it would just stay there. I'm able to go in recovery mode, it says:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
It won't go any further, no buttons apart from the power button would work.
I tried to go on the Samsung updates website to look for a firmware but i could not find my country (Mauritius).
Is the the "Region" important while choosing a firmware or can i just choose a firmware for any other country?
I tried installing I9300XXEMC3_I9300NEEEMC1_I9300XXEMB6_HOME.tar.md5 on my phone through Odin but it would fail on the very first stage (see attachment). I guess this file was not right...
I tried downloading other OMEGA WinRar files, but it contained only folders and other stuffs, i could not find any file with .tar extension.
Can somebody please tell me how do i fix my phone?
Please send me download links of .tar.md5 files and instruct me how to install it. I'll be very grateful to you
i don't mind loosing all my pictures, apps, songs and other files on my phone. I just want my phone to be repaired because i'll need it soon.
Thank you for answering.
Click to expand...
Click to collapse
Try downloading latest or custom firmware and save it to your extcard using card reader. Then try to root again your phone. Then flash the firmware (Custom or not) through custom recovery.Your problem doesn't make me nervous at all I've experienced bricking my phone much more than that.
You mean to say that i should download a firmware, then save it on an SD card which i insert in my phone...
And after that i root my phone again, right?
But as soon as i'm in download mode, my phone says:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
No buttons would work after that
So i won't be able to access my firmware...
What do i do?
Please help me
i'm desperate :crying:
thank you.
Gowtamee said:
You mean to say that i should download a firmware, then save it on an SD card which i insert in my phone...
And after that i root my phone again, right?
But as soon as i'm in download mode, my phone says:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
No buttons would work after that
So i won't be able to access my firmware...
What do i do?
Please help me
i'm desperate :crying:
thank you.
Click to expand...
Click to collapse
Download mode is not for flashing from SD card .
Download mode you flash a stock rom tar via Odin .
If that fails its a service centre repair job .
jje
it didn't work but thanks anyway
my phone is rooted...will i benefit from the warranty?
i heard that rooting a phone voids its warranty...
i tried flashing some ROMS...none of them works :crying:
i even tried rooting it again...still unsuccessful
Now on download mode, my phone says:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: Yes (2 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
Do i still benefit from the warranty?
i heard that rooting a phone voids its warranty...
I have a Verizon Galaxy Note II that is incorrectly reading as GT-N7105 and won't let me flash anything in ODIN. Can I fix this without a hardware mod?
Full readout in ODIN
ODIN MODE
PRODUCT NAME: GT-N7105
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 0
RP SWREV A2
Have some more information on the phone. The user says they tried to flash 4.4.2 gapps to the phone and installed a ROM that they thought was for the SCH-I605. Before this the phone was rooted and unlocked on 4.1.2 with the 4.3 update downloaded but not able to install (blocked by CWM). I have tried all the combinations I can think of using several ODIN versions on a Windows 7, and two Windows 8.1 machines. Nothing will flash, everyhting just errors out on writing the NAND it looks like. The closest thing I can get to progress is using the N7105 PIT file and the CWM for the SCH-I605. This gives me a boot screen that doesn't blink on and off, but the phone never does anything.
He flashed the 4.3 bootloader for a different device. You have a brick.
Sent from my SCH-I605 using xda app-developers app
I knew it was pretty bad when it was reporting the wrong phone model. Could I use the unbricking method by KOBOL here? Or what can I do to unbrick the device? It was purchased used, so no warranty on it at all.
Thanks
Sometimes I am able to get it to the Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But Kies never detects the phone.
I am able to flash the stock I605 recovery, but am not able to enter it. They don't have the file that they flashed that caused this problem. Can I download the I605 bootloader anywhere?
So i have never had so many problems with a phone, but this would be the first one a customer tried doing on their own.
So he downloaded the latest file from sammobile for his SCH-i605. he used odin to flash and was stuck in boot loop. I have tried many different methods to try and get his phone working. I have tried all of the alternate method files to no avail. the current file i have flashed is the VRAMC3 restore out of all the files i have tried this is 1 of very few that make it through the write. All the others fail on sboot. It currently sits on the unauthorized verizon blah blah blah. Its had no recovery since he brought it over and havent been able to get recovery back. All i have access to is download mode, some firmwares give me the kies screen talking about an error but cant get it seen in kies versions 2 and 3.
If you need any other info just ask, if i know the answer i will give it. He has no clue as to what OS he was on or even what the ROM that was on there.
BCityModz said:
So i have never had so many problems with a phone, but this would be the first one a customer tried doing on their own.
So he downloaded the latest file from sammobile for his SCH-i605. he used odin to flash and was stuck in boot loop. I have tried many different methods to try and get his phone working. I have tried all of the alternate method files to no avail. the current file i have flashed is the VRAMC3 restore out of all the files i have tried this is 1 of very few that make it through the write. All the others fail on sboot. It currently sits on the unauthorized verizon blah blah blah. Its had no recovery since he brought it over and havent been able to get recovery back. All i have access to is download mode, some firmwares give me the kies screen talking about an error but cant get it seen in kies versions 2 and 3.
If you need any other info just ask, if i know the answer i will give it. He has no clue as to what OS he was on or even what the ROM that was on there.
Click to expand...
Click to collapse
If the person tried to ODIN flash the latest firmware version for the SCH-I605, then it would have been VRUFND7 4.4.2 Kit Kat. (Unfortunately... once you install 4.3 or 4.4.2 on our Note 2's, both of those firmwares lock the bootloader with no current do it yourself method to unlock it. You can't successfully flash a prior Android version onto the phone after you upgrade past 4.1.2 either because of the locked bootloader).
Check out Droidstyle's Restore Guide here: http://forum.xda-developers.com/showthread.php?p=34891181. You will probably need to flash the pit file with the firmware to get it to Odin flash successfully. You can grab the SCH-I605 16gb Pit file from the guide.
Even though Droidstyle's guide is a little old, it is still the same steps for restoring to 4.4.2, so if you follow the guide (section 1b), it should help you fix the phone.
He doesn't have a link for the 4.4.2 firmware, but you can grab it from Sammobile. It looks like the Sammobile site is currently down for maintenance, but the link is here: http://www.sammobile.com/firmwares/download/30950/I605VRUFND7_I605VZWFND7_VZW.zip/
If you're using an older ODIN, then I would probably try to use a newer Odin version like 3.0.9 or 3.10.0. Make sure you run it with Administrative privileges and disable antivirus programs.
Good luck!
mattnmag said:
If the person tried to ODIN flash the latest firmware version for the SCH-I605, then it would have been VRUFND7 4.4.2 Kit Kat. (Unfortunately... once you install 4.3 or 4.4.2 on our Note 2's, both of those firmwares lock the bootloader with no current do it yourself method to unlock it. You can't successfully flash a prior Android version onto the phone after you upgrade past 4.1.2 either because of the locked bootloader).
Check out Droidstyle's Restore Guide here: http://forum.xda-developers.com/showthread.php?p=34891181. You will probably need to flash the pit file with the firmware to get it to Odin flash successfully. You can grab the SCH-I605 16gb Pit file from the guide.
Even though Droidstyle's guide is a little old, it is still the same steps for restoring to 4.4.2, so if you follow the guide (section 1b), it should help you fix the phone.
He doesn't have a link for the 4.4.2 firmware, but you can grab it from Sammobile. It looks like the Sammobile site is currently down for maintenance, but the link is here: http://www.sammobile.com/firmwares/download/30950/I605VRUFND7_I605VZWFND7_VZW.zip/
If you're using an older ODIN, then I would probably try to use a newer Odin version like 3.0.9 or 3.10.0. Make sure you run it with Administrative privileges and disable antivirus programs.
Good luck!
Click to expand...
Click to collapse
Ive tried that one as well and almost all the files in that thread. When he flashed the 4.4.2 firmware the phone wouldnt boot all it did was flash the Note 2 screen. Ive used the pit file as well with no luck. Using the top file on the link fails almost instantly, VRAMC3 writes and passes but will not boot, shows the unauthorized firmware screen.
I'm wondering if he flashed a firmware onto the phone that was from a different carrier like ATT or something. If so, he may have messed up the phone so bad that it might need jtag to repair it.
You've probably already tried all the normal Odin tips like using a different usb cable, different ports on the computer (usb 2.0 port is recommended), etc... so I won't go over all those.
I've never tried it and don't know if I'd recommend it, but I recall reading some threads a while back where someone discussed trying the Nand Erase function in Odin.... (again.... I'm not saying to do that... but you may want to research it to see if it might be an option if nothing else works).
I've also read where people say that they've used Cygwin to create custom tar files... then they ODIN installed each of the separate partition files (e.g. recovery, boot, modem, system, etc...), onto their Samsung device.
I'm not knowledgeable enough to offer guidance with Cygwin and I'm not sure if either of these ideas would work, but I just thought I'd throw them out there for the sake of brainstorming for ideas. Maybe someone will respond to your request who has more knowledge and ideas.
I wish you luck with getting it fixed.
Hi all,
I am a newbie and don't know much. So please bear with me.
I was trying to root my Galaxy S5(SM-G900H) by using the tutorial given on http://forum.xda-developers.com/showthread.php?t=2696537 but the process did not go as planned as keep struck on recovery.img on odin3.10 so I googled and found that changing USB port will help so I take out the battery changed the port and try again but this time I soft-bricked the phone as odin struck on cache.img and now when i try to start my phone I get Firmware upgrade encountered. So now I again googled and found about unified toolkit and install it on my windows 10 ,now when i choose option 6 (i.e. flash stock boot image to your device) it says waiting for usb debugging to be enabled ,now I remember I turn USB debugging on but it is still struck here. Now what should I do? My parents gave this phone just a week ago and I am in deep trouble.
P.S.-I am only able go into the download mode not recovery mode.
Boot into Download Mode and use Odin to install the original firmware. Might require a factory reset after if still bootlooping. Here is a link to 6.0.1 from Sri Lanka https://mega.nz/#!YMAFhR4a!pZmf7OEWgzDzET1FLGsAOQ5XyVlvE8y4pJfB8KDNbMI . Any region firmware should work for the F model. If you want your specific one then check sammobile.com. I just linked to the other because it is a much faster download.
Problem encountred while installing original firmware
I tried to use Odin to install original firmware , I started the process but Odin got struck on sboot.bin (Also I read somewhere that whole process does not take more than 10 minutes). So please help me.
Which firmware did you try?
You might be able to use Kies to recover your device as well.
es0tericcha0s said:
Which firmware did you try?
You might be able to use Kies to recover your device as well.
Click to expand...
Click to collapse
I downloaded it from http://www.teamandroiders.com/samsung-galaxy-s5-sm-g900h-stock-rom-firmware/ with PDA: I9500XXUBOL2. I want to know one more thing as I am in India so should I use INU or INS?
ratcoder said:
I downloaded it from http://www.teamandroiders.com/samsung-galaxy-s5-sm-g900h-stock-rom-firmware/ with PDA: I9500XXUBOL2. I want to know one more thing as I am in India so should I use INU or INS?
Click to expand...
Click to collapse
Oh geez...no wonder it isn't working. i9500 = S4. Really gotta be careful with that kind of thing.
INU is for unlocked from the factory
INS is for phones from a carrier
Either one should work. As mentioned, with the G900h, any firmware should work that is for that model, no matter the region. Use the one I posted and change the language or grab the one for India from sammobile.com though it'll take an hour or 2.
Edit: I see that it was just mislabeled as i9500, but the download says g900h after all.
Were you on 5.1.1 or 5.0 before you started this process?
es0tericcha0s said:
Oh geez...no wonder it isn't working. i9500 = S4. Really gotta be careful with that kind of thing.
INU is for unlocked from the factory
INS is for phones from a carrier
Either one should work. As mentioned, with the G900h, any firmware should work that is for that model, no matter the region. Use the one I posted and change the language or grab the one for India from sammobile.com though it'll take an hour or 2.
Edit: I see that it was just mislabeled as i9500, but the download says g900h after all.
Were you on 5.1.1 or 5.0 before you started this process?
Click to expand...
Click to collapse
Well I downloaded another one from http://firmwarefile.com/samsung-sm-g900h the second one, before it all started I was on 5.0 and the link you give does not work anymore. Anyway I tried with the firmware with upper link. And Odin is struck with sboot.bin for more than an hour. And have no idea what's going on? So what should I do?
Also someone suggested to use Pit. Should I use it?
No, don't use the pit. Try the newer firmware for 6.0
es0tericcha0s said:
No, don't use the pit. Try the newer firmware for 6.0
Click to expand...
Click to collapse
So I downloaded the 3rd link from http://firmwarefile.com/samsung-sm-g900h for newer version and try Odin 11.2 with it. I try two times to flash the firmware first time it struck on sboot.bin and second time it just showed fails(I used Odin with administrative rights this time) .Please see the attached images. Please tell me what should I do now. I want to repair it ASAP.
Not sure. This is pretty standard stuff. Have used Odin 1000 times and haven't had that much trouble with it. Sorry.
es0tericcha0s said:
Not sure. This is pretty standard stuff. Have used Odin 1000 times and haven't had that much trouble with it. Sorry.
Click to expand...
Click to collapse
I think I should mention that the firmware I used was INS not INU and if you have a genuine link for version 6 for INU with fast download speed, please share it (different than sammobile because it has only fast speed only for premium users). Should I use PIT or try something else than Odin. Anything that might help please tell me. I have got this phone just a week ago and my parents are not gonna give me a new one so please help me.
I keep encountering sboot.bin error ,maybe there is a way to resolve it?
I'd just try to load TWRP and a custom rom at this point.
es0tericcha0s said:
I'd just try to load TWRP and a custom rom at this point.
Click to expand...
Click to collapse
Actually I have no idea what TWRP is so any link or anything that can help without ruining the situtation.
http://forum.xda-developers.com/galaxy-s5/development/rom-t3224562
es0tericcha0s said:
http://forum.xda-developers.com/galaxy-s5/development/rom-t3224562
Click to expand...
Click to collapse
I want to know one more thing on the above link there is a custom firmware and there is a custom ROM with bootloader and all. So should I flash custom firmware or use the instructions given on thread to flash custom ROM?
The custom rom does not include bootloader and modem. You will need to flash via Odin if you were not on the same firmware as the software is based off of. I would flash them anyway, to be safe. You can skip the root part as it is not need. Follow the instruction in post 2 for stock rom users minus the root part. Make sure to boot directly back into TWRP recovery before it attempts to boot. You can load rom on SD card and any additional add-ons you want. Plenty of youtube guides on how to use Odin to flash TWRP and such.
es0tericcha0s said:
The custom rom does not include bootloader and modem. You will need to flash via Odin if you were not on the same firmware as the software is based off of. I would flash them anyway, to be safe. You can skip the root part as it is not need. Follow the instruction in post 2 for stock rom users minus the root part. Make sure to boot directly back into TWRP recovery before it attempts to boot. You can load rom on SD card and any additional add-ons you want. Plenty of youtube guides on how to use Odin to flash TWRP and such.
Click to expand...
Click to collapse
Finally seen some progress, thank you very much. I successfully flashed TWRP recovery, but I got a couple of questions. Firstly I should flash ROM from recovery mode and then go to download mode to flash boot-loader and Modem files right? Should I flash ROM from SD card? And if this custom ROM causes problem is there a way to get to stock ROM? And is this custom ROM rooted or I have to root it via CF-Auto root or try anything else?
Rom might work without bootloader and modem. Just depends on your previous firmware. I would try and flash it though as it was recommended. Rom flash from SD card or internal. Either way should work. You will be able to go back to stock if you can find a firmware that works. It is already rooted.
es0tericcha0s said:
Rom might work without bootloader and modem. Just depends on your previous firmware. I would try and flash it though as it was recommended. Rom flash from SD card or internal. Either way should work. You will be able to go back to stock if you can find a firmware that works. It is already rooted.
Click to expand...
Click to collapse
Thank you very much.phone is working again with custom ROM.just one more thing if I upgrade from custom ROM what will happen?
:good::highfive::victory:
It should work to reflash the original firmware through Odin. Just get the one that matches your baseband version.
i know this is a newer phone but i'm still pretty surprised i haven't been able to find anyone that's rooted it yet. i've been all over the internet it seems. this is the :
Samsung Galaxy J3(6)
SM-J320VPP
Android 6.0.1 Marshamllow
Verizon pre-paid plan/network
i see lots of videos and guides for other j320f or j320p (close but no cigar) and nothing works. what i've tried so far:
- Dev mode enabled, USB debugging and OEM unlocked.
- any/all 1 click root apps. none worked, and i'd like to avoid these anyway unless you know it works 100% for my version. at this point i'll try anything.
- recovery / flash superSU. only i haven't even gotten past flashing a recovery. i've tried several different versions of Odin with several different versions of recovery .tar's and for each combination i've tried Odin simply fails. big red FAIL button in upper left corner. sadness. this seems like what i need help with. i have SuperSU downloaded so if i can just get a custom recovery working for my phone i'm hoping it's a simple process from there of booting into the custom recovery and then installing the SuperSU. presto.
is there no hope? is there no tested, confirmed working recovery that i can flash to my phone using Odin? i've tried Odins 3.07, 3.09, and 3.11.1. various custom recovery .tars but the only one i know for sure is the J2 version official from TWRP's website (yes i know it says J2 but someone on another thread said it's similar enough to someone ELSE's model "j320f" or something so i gave it a shot) the other recovery .tars i tried are suspect since they had generic names "recovery.tar" and were downloaded from links provided in many different "guides" that i've googled.
internet, you have failed me. thus do i issue this challenge to all those mighty phone hackers of the land. come forth and slay the evil giant that is my phone's ludicrous security (seriosuly how is this even a thing still in 2016. my phone can do so much more, so much better but for these shenanigans).
thanks so much in advance!
EDIT: not sure about the bootloader. i may be a complete idiot. yes. ok. i'm onto something. gonna post this anyway for any other poor soul that has this version phone, but i think Odin's probably failing because the bootloader is still locked. and Samsung doesn't make this easy like motorola or HTC. T_T. once more into the fray! i'll see if i can't track down a method for unlocking the bootloader on my phone. should i return victorious i'll go ahead and share my steps with the rest of the class.
EDIT2: there is no waking from this nightmare. i dig and dig and dig and can find no root. *sigh*
-- i've got android studio installed. and the java SDK platform-tools which contains the adb.exe, fastboot.exe, etc.
-- something i should explain here: in all these guides whenever there's a step that requires the phone to be connected to the PC, it simply says to, you know...connect your phone. but MY phone by default only uses the cable for battery charging. i have to (on my phone) swipe down from the top, select the "connected for charging" message bringing up "Use USB For" options, then select "Transferring media files" option. THEN my phone shows up both in my windows explorer and displays as a device when i run "adb devices".
--when i run "adb reboot bootloader" this does the same thing as holding down pwr/home/vol down - phone boots up into a blue (teal?) background with a large down arrow in center, below that it says "downloading...do not turn off target". in the upper left are several lines of system font style text:
ODIN MODE
PRODUCT NAME: SM-J320VPP
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: OFF*
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A1, P1*
SECURE DOWNLOAD: ENABLE
*the R's above may be A's or vice versa...hard to read font. sorry
--but as soon as i've rebooted into this mode, my phone disappears from adb devices' list of devices attached. regardless when i run the "fastboot oem unlock" command from the adb shell on my PC at this point i get the infamous "waiting for any device" message and then, of course, nothing....forever. i've also installed PDAnet but i think it's hitting the same road block where my phone is only using the cable for battery charging and i can't toggle that option from ODIN MODE. there's also a "USB Configuration" choice under development options on the phone that has the same options as "Use USB for" but this doesn't stick when booting into ODIN MODE. sadness. i need to retire my brain thoughts at this point. will post TL;DR. you're a saint of geeks if you've made it through my WoT to here.
EDIT3: just an observation - the only thing (so far) that will detect my phone in ODIN MODE is ODIN itself. is there a way to use ODIN to unlock the bootloader?
TL;DR: i think odin is failing when attempting to flash because of locked bootloader. need help with unlocking bootloader first? phone defaults to use USB cable for charging only so i CAN change that to MTP while phone is on normal and then run "adb reboot bootloader" but then phone vanishes from adb devices list once it reboots (and cable is then only charging). thus, cannot run "adb fastboot oem unlock" cuz it hangs displaying "waiting for any device" -- can i unlock the bootloader on this phone? or did i buy a phone that's IMPOSSIBLE TO ROOT!?!?
I have the same problem! I need to root it to install the Patch to change from CDMA to GSM! Because I tried without root and it tells me "E: Signature verification failed"
Thanks
Still nothing?
This is starting to look hopeless
we need the stock recovery.img to be able to mod it and flash it through odin. the recovery for the verizon version does not match so odin wont allow it. i asked on sammobile and they said verizon only releases ota on the device. so idk what to do. perhaps someone with knowledge on this will help.
so far what ive figured out our situation is:
we need root to get root.
more specifically we need root to pull the recovery and then mod that recovery with twrp and use twrp to gain root. The root methods that worked for the other variant SM-J320P dont appear to work for ours, probably due to having android 6.0.1
till we get root we are stuck. the rest is easyish
News?
There is nowbody that had been rooted his J3 Verizon yet?? We need help with this trouble!
In this forum (http://forum.xda-developers.com/android/help/galaxy-j3-sm-j320vpp-configuring-cdma-t3414049) Sergio said:
" try root with this root is only for Snapdragon 410 MSM8916
http://forum.gsmhosting.com/vbb/f723...t1994-1946985/ "
The J320VPP has a "1.2 GHz, Quad-Core". There is no place that sais it's a "Qualcomm Snapdragon 410 Msm:8916" processor. You think this suggestion could work?
NerdmastaX said:
we need the stock recovery.img to be able to mod it and flash it through odin. the recovery for the verizon version does not match so odin wont allow it. i asked on sammobile and they said verizon only releases ota on the device. so idk what to do. perhaps someone with knowledge on this will help.
so far what ive figured out our situation is:
we need root to get root.
more specifically we need root to pull the recovery and then mod that recovery with twrp and use twrp to gain root. The root methods that worked for the other variant SM-J320P dont appear to work for ours, probably due to having android 6.0.1
till we get root we are stuck. the rest is easyish
Click to expand...
Click to collapse
I think I've managed to get the recovery.img with KIES... However flashing the image I've extracted doesn't work but if anyone is ready to help me port a recovery I might try !
Whusky said:
I think I've managed to get the recovery.img with KIES... However flashing the image I've extracted doesn't work but if anyone is ready to help me port a recovery I might try !
Click to expand...
Click to collapse
im gonna try and do a reflash with kies and grab that file myself, ill work a bit on it because i love this phone but no basic root is driving me insane. if you can beat me to posting tell me how you got the file, otherwise ill post here once i find out. I'm not a top of the line developer but i can work my way around and try my best since nobody else is offering to help.
wish me luck.
sorry for the double post but got the files via the verizon software assistant no problem. it ended up in C:\Users\YOURNAME\AppData\Roaming\Verizon_AR\SM-J320VPP_J320VPPVRU1APC3_FACTORY for me, and even decrypted and unzipped itself for me, now we just need to mod a custom thingy into those files and we can work towards rooting. so as i sit here and watch my phone finish flashing back to factory i will look into how we can mod the recovery. if someone is capable of doing it faster i can upload the files very quickly as its only 1.4 gb
well turns out verizon locks the flashing with signature verfication. so unless verizon changes or root is found for marshmellow there will be zero possible root for this phone.
NerdmastaX said:
sorry for the double post but got the files via the verizon software assistant no problem. it ended up in C:\Users\YOURNAME\AppData\Roaming\Verizon_AR\SM-J320VPP_J320VPPVRU1APC3_FACTORY for me, and even decrypted and unzipped itself for me, now we just need to mod a custom thingy into those files and we can work towards rooting. so as i sit here and watch my phone finish flashing back to factory i will look into how we can mod the recovery. if someone is capable of doing it faster i can upload the files very quickly as its only 1.4 gb
Click to expand...
Click to collapse
Hi I'm currently rooted with TWRP 3.0.2 recovery and mabey this might help http://forum.xda-developers.com/general/help/samsung-galaxy-j3-sm-j320fn-how-to-root-t3369511
Sparko612 said:
Hi I'm currently rooted with TWRP 3.0.2 recovery and mabey this might help http://forum.xda-developers.com/general/help/samsung-galaxy-j3-sm-j320fn-how-to-root-t3369511
Click to expand...
Click to collapse
verizon blocks flashing of modified recoveries. so unless someone finds a root exploit for marshmallow we will have no luck.
Has the kingroot method worked for root on your device ??
NerdmastaX said:
we need the stock recovery.img to be able to mod it and flash it through odin. the recovery for the verizon version does not match so odin wont allow it. i asked on sammobile and they said verizon only releases ota on the device. so idk what to do. perhaps someone with knowledge on this will help.
so far what ive figured out our situation is:
we need root to get root.
more specifically we need root to pull the recovery and then mod that recovery with twrp and use twrp to gain root. The root methods that worked for the other variant SM-J320P dont appear to work for ours, probably due to having android 6.0.1
till we get root we are stuck. the rest is easyish
Click to expand...
Click to collapse
Hi to all, im new here and i am having the exact same problem! You say that there has to be a root specifically for the 6.0.. So i found that in the Chainfire page they have this https://download.chainfire.eu/986/CF-Root/CF-Auto-Root/CF-Auto-Root-j3lteusc-j3lteusc-smj320r4.zip already (i dont know if i can post links, so if i cant, sorry), it is marshmallow but the model is J320R4, so i was wondering if this could be the solution. i'll be waiting here for a response, i seriously love this phone :c
MetAJFA said:
Hi to all, im new here and i am having the exact same problem! You say that there has to be a root specifically for the 6.0.. So i found that in the Chainfire page they have this https://download.chainfire.eu/986/CF-Root/CF-Auto-Root/CF-Auto-Root-j3lteusc-j3lteusc-smj320r4.zip already (i dont know if i can post links, so if i cant, sorry), it is marshmallow but the model is J320R4, so i was wondering if this could be the solution. i'll be waiting here for a response, i seriously love this phone :c
Click to expand...
Click to collapse
No, this is not the solution. When using a utlity like CF Auto Root, it must be specific to your model / carrier. Trying to install that will do 1 of 2 things.
1) Just fail in Odin
or
2) Soft brick your device
Since VZW doesn't bother to put out the full firmware files to reflash the device, it's not worth attempting without having the backup plan of the original firmware to flash via Odin.
an twrp is already available for j320p u can try to root your device using it
es0tericcha0s said:
No, this is not the solution. When using a utlity like CF Auto Root, it must be specific to your model / carrier. Trying to install that will do 1 of 2 things.
1) Just fail in Odin
or
2) Soft brick your device
Since VZW doesn't bother to put out the full firmware files to reflash the device, it's not worth attempting without having the backup plan of the original firmware to flash via Odin.
Click to expand...
Click to collapse
Understood, thank very much you for clearing that out. Since all this is pretty much a kick in the butt, do you think there will be some kind of solution to this or should we just lose hope? :/
can Someone here help me with this.
someone wrote:
I have the same problem, I already got 4G LTE data with the correct APN and also I change to lte/gsm with the help of a network app and with commands in adb shell :
pm clear com.android.providers.telephony
settings put global preferred_network_mode 9
settings put global preferred_network_mode1 9
settings put global preferred_network_mode2 9
Click to expand...
Click to collapse
but i dont know how to initiate this adb mode in the phone. anyone?
anyone fix ?
i have few units J320VPP same problem .. searching for service .
That's a Verizon device with a locked bootloader, you cannot try twrp or modified files meant for 320f or other models on this one.
Sent from my SM-N920G using Tapatalk
So has anyone found any luck with this device? It's driving me crazy not having root