The bodies look so similar. I'm wondering if my S6 cases will fit on the S7? Or if anyone has purchased an S7 case that fits on an S6 would be nice to hear as well. I own several cases for my S6 that are headed for the trash can if they don't fit.
i am curious as well. i am in the same situation.
I don't think cases will fit because the dimensions are slightly different (+ there are edges on the back).
The S7 is about 1 mm thicker, but also 1mm less in height and width.
I am wondering whether pouches would still be good for it though since they probably can adapt if the space the phone takes as a whole is the same.
dills84 said:
The bodies look so similar. I'm wondering if my S6 cases will fit on the S7? Or if anyone has purchased an S7 case that fits on an S6 would be nice to hear as well. I own several cases for my S6 that are headed for the trash can if they don't fit.
Click to expand...
Click to collapse
no , i have tried several cases on my S6
the s7 cases will keep pressing the power button ,so it can not fit
liangzidaigo said:
no , i have tried several cases on my S6
the s7 cases will keep pressing the power button ,so it can not fit
Click to expand...
Click to collapse
thanks for the feedback!
No, the cases wont fit them as the dimensions are different. Try a custom leather case from Story Leather, theyre custom made leather cases
I would think not especially because of the camera being different.
Just to update. I received my Galaxy S7 yesterday and S6 cases are not compatible. The speaker, microphone, and headphone jack are in different locations. Along with the phone itself being slightly thicker than the S6. Nice phone though!
i have a mophie and mine fits but the camera is right on the cut out point . phone charges and everything ..ill post pics soon
It really depends on the case. I just got s7 and I had s6 previously - some of the cases fit with no problem.
dills84 said:
The bodies look so similar. I'm wondering if my S6 cases will fit on the S7? Or if anyone has purchased an S7 case that fits on an S6 would be nice to hear as well. I own several cases for my S6 that are headed for the trash can if they don't fit.
Click to expand...
Click to collapse
Seriously, they are not the same. The dimension of the S7 case is 9 x 5 x 0.4 inches. S6's dimension is 6.8 x 3.5 x 0.8 inches.
But i think they could be mounted forcibly. S6 and S7 have the same location of earphone slot, the usb slot and the camera lens.
bestof2016 said:
Seriously, they are not the same. The dimension of the S7 case is 9 x 5 x 0.4 inches. S6's dimension is 6.8 x 3.5 x 0.8 inches.
But i think they could be mounted forcibly. S6 and S7 have the same location of earphone slot, the usb slot and the camera lens.
Click to expand...
Click to collapse
I don't know how you're going to forcibly fit a 9" tall s7 into a 6.8" tall s6's case, but good luck!
it almost fit ,but the buttons are a little bit mismatch
so you need to make a decision tho
---------- Post added at 12:12 AM ---------- Previous post was at 12:11 AM ----------
peachpuff said:
I don't know how you're going to forcibly fit a 9" tall s7 into a 6.8" tall s6's case, but good luck!
Click to expand...
Click to collapse
Lol , good reaction to the post , lol
peachpuff said:
I don't know how you're going to forcibly fit a 9" tall s7 into a 6.8" tall s6's case, but good luck!
Click to expand...
Click to collapse
Haha. I know i will get a humour reply like this. Actually i checked the dimension on Amazon and i found it different in different listings. Some say it's 6.8 x 5 x 0.4, some say it's 8 x 5 x 0.4.
Anyway S6 and S7 have almost the same dimension so i put a 'forcibly' barely in my last reply.
I have an s6 hard case on order, it'll probably need some trimming with a knife, i'll update when i get it.
Click to expand...
Click to collapse
No no no and just no.
bradbutter said:
i have a mophie and mine fits but the camera is right on the cut out point . phone charges and everything ..ill post pics soon
Click to expand...
Click to collapse
Hi, may we see the pic of it ? Thanks.
I had a Spigen Neo Hybrid case for my S6 and it 'fit' on the S7. I say 'fit' because it mostly worked. But the camera area wasn't right and the side buttons were just slightly off. I only used it because they hadn't come out with their S7 model yet. I've since made the switch.
I'll take your s6 cases. Hook me [email protected]
I just upgraded to an S7 and the only S6 case I was able to use is the one that Samsung sold for the S6 that basically just clips around the four corners. I like that one because it leaves the sides clear without any lip to get in the way. The others wouldn't fit due to the slightly different shape and the ports are not lined up. My clip case doesn't line up perfect either but it works for now. Meh.
Nothing that a sharp xacto knife can't help you achieve. Did that with two different cases and they both work. Ghetto but they work. The power button doesn't hit full on, but if you're able to do it sideways it works fine. Good enough until you find a case that you fall in love, if not keep doing it sideways...
Related
Has anyone tried one of these SZLF Aluminum Bumper cases for the AT&T Note? It appears this is only for the International version but I am not aware of any differences in the size of the phone so it may work for both. All of the listings I have found for this on eBay only mention i9220 and N7000 though.
http://www.ebay.com/itm/New-Luxury-...374880?pt=PDA_Accessories&hash=item4163fca0e0
Also, if you have tried this, does the case cover the edges of the screen (further protecting a screen protector)? I like the look of this one as well as the Anymode Bumper but the Anymode looks really big.
http://forum.xda-developers.com/showthread.php?t=1387444
It'll fit the AT&T/Canadian Note.
I recommend u get the following one. It's well worth the money.
http://forum.xda-developers.com/showthread.php?t=1560490
Sweet armor is nice and all, but the fake is 1/4 the price, so it would win my vote. The review showed that the original is better made, but I just don't think it's that much better depending on how biased the review is.
I got the sweet armor (fake version, same as szlf) and ended up not using it. Here's why:
1. Makes phone more slippery and heavy
2. Scratches screen protector when taking on and off (and you must take it off to access battery)
3. Not very ergonomic
amcl said:
I got the sweet armor (fake version, same as szlf) and ended up not using it. Here's why:
1. Makes phone more slippery and heavy
2. Scratches screen protector when taking on and off (and you must take it off to access battery)
3. Not very ergonomic
Click to expand...
Click to collapse
They look cool, some people like them, I just don't see the point since I agree with primarily your first point. The other day I was laying in my recliner with my 2 year old beside me and we were looking at a zoo app of animals while holding my phone above us. It slipped and I cracked my poor baby girl in the face with my phone. Since then I keep the silicon jacket on it untill my Seidio comes in the mail.
Can't stand the "SZLF" logo all over it...
Stay away from Aluminum Bumpers
My buddy and I both have Notes. We were just troubleshooting (Like 15 muintes ago) network connectivity problems he has been experiencing here at work the last few days. The connection would drop or stay at 4G, and rarely hit LTE. What we discovered was it was the aluminum bumper he installed around the same time the problems started. It drastically reduce his signal quality. Stay far away from these.
Thanks everyone for all the feedback. Based on the issues with potentially scratching the screen protector putting this bumper on and the poor signal strength I am just going to keep looking for something else. I like the BoxWave TPU case I have now but it does not cover the edge of the screen/SP so every once in awhile I notice it pushing up against the SP causing the SP to move slightly.
mbnocx said:
Thanks everyone for all the feedback. Based on the issues with potentially scratching the screen protector putting this bumper on and the poor signal strength I am just going to keep looking for something else. I like the BoxWave TPU case I have now but it does not cover the edge of the screen/SP so every once in awhile I notice it pushing up against the SP causing the SP to move slightly.
Click to expand...
Click to collapse
I am not sure, but it also looks like the battery cover for the N7000 is different than the one on the I717. Noticed on this SZLF case, the bottom back portion would block the I717 cover.
Chief Geek said:
Sweet armor is nice and all, but the fake is 1/4 the price, so it would win my vote. The review showed that the original is better made, but I just don't think it's that much better depending on how biased the review is.
Click to expand...
Click to collapse
i have a chrome one that im about to put on ebay
if anybody is interested and wants one for less than the $100 it costs, PM me...
clockcycle said:
I am not sure, but it also looks like the battery cover for the N7000 is different than the one on the I717. Noticed on this SZLF case, the bottom back portion would block the I717 cover.
Click to expand...
Click to collapse
I don't think that's even a Note in the pictures, no S-Pen
Barry (NJ) said:
I don't think that's even a Note in the pictures, no S-Pen
Click to expand...
Click to collapse
Wow, I didn't even notice that. It looks like it is a Galaxy SII but all over the eBay sale it mentions Note N7000.
Glad to to know the new features of Note 3,and the leather battery cover is much better than the Galaxy traditional plastic cover,yet have no idea what kind of Note 3 case could brings the new mate another fashion elements, post your founding and enjoy here!
Note 3 Case: http://bit.ly/1a93eCW
Spigen case: http://bit.ly/17Y0jjF
Case-mate: http://bit.ly/1b1pVg2
Sorry to know no belkin and otterbox case so far!!
Samsung IFA 2013 website (Click image for original size)
Android Central article
Textured Protective Cover +
Wireless charging kit looks same as GS4 one
I am hoping Spigen rolls out a Slim Armor View for the GN3 like they did for the GS4. They have a Slim Armor so I suspect they will offer a view case later one.
Cool Note 3 Cases
Love the leather body of the Note 3. DSstyles.com already have many cases for note 3. But, do we still need a case as the leather body is so nice?!
View attachment 2246789
greentaloy said:
Glad to to know the new features of Note 3,and the leather battery cover is much better than the Galaxy traditional plastic cover,yet have no idea what kind of Note 3 case could brings the new mate another fashion elements, post your founding and enjoy here!
Click to expand...
Click to collapse
Roy Long said:
Love the leather body of the Note 3. DSstyles.com already have many cases for note 3. But, do we still need a case as the leather body is so nice?!
View attachment 2246789
Click to expand...
Click to collapse
We need alternatives. I personally think the leather effect sounds a bit tacky, especially the stitching (is the stitching real, or is that imprinted as with the leather effect)
I don't want a case (my Galaxy Nexus is looking a bit scratched, but not noticeably so), I just want a plain back like the Galaxy Nexus (or even better, the Nexus 10)
A couple of cases have started to appear on Amazon. This one comes in many colors:
http://www.amazon.com/INVELLOP-Blac...18&sr=8-1&keywords=samsung+galaxy+note+3+case
This one in the phone's black or white:
http://www.amazon.com/COATED-SPIGEN...35&sr=8-4&keywords=samsung+galaxy+note+3+case
I've gotten Diztronic cases for my last few phones and I'm waiting to see their N3 variant.
I ended up getting the below. was about 20USD including shipping to me
I also got the below but I got the 3x value pack for 15-20USD including shipping to me. keeping in mind I live in New Zealand so shipping is always the dearest for me compared to rest of world
I'll be happy when these 2 arrive, and hopefully before my note 3, last time I recieved my note 2 before my screen protector, I ended up having that overally large plastic crap with the flap at the end (that it comes on with) for a week lol...
I've always been a fan of spigen, their screen protectors are perfect, it fits around everything with no gaps, unlike some protectors where they get to the home button then just drop vertically down, which means below the home button is open to elements... same with near the front camera etc, above it is open to elements... on other screen protectors I've noticed.
entwicklun said:
I ended up getting the below. was about 20USD including shipping to me
I also got the below but I got the 3x value pack for 15-20USD including shipping to me. keeping in mind I live in New Zealand so shipping is always the dearest for me compared to rest of world
I'll be happy when these 2 arrive, and hopefully before my note 3, last time I recieved my note 2 before my screen protector, I ended up having that overally large plastic crap with the flap at the end (that it comes on with) for a week lol...
I've always been a fan of spigen, their screen protectors are perfect, it fits around everything with no gaps, unlike some protectors where they get to the home button then just drop vertically down, which means below the home button is open to elements... same with near the front camera etc, above it is open to elements... on other screen protectors I've noticed.
Click to expand...
Click to collapse
I have ordered the spigen ultra crystal and hybrid case too. But I'm not going to keep my hopes up since the stated shipping date is going to be late September and arriving date is mid October. I think I might get the phone before them come. That's why I bought a cheap tpu from eBay also hopefully to cover it before the two arrives from spigen.
Sent from my GT-N7100 using xda app-developers app
I just hope I can get a battery cover without the faux leather lool...It is hideous IMO.
sent from my S3, S4 or Note2
force70 said:
I just hope I can get a battery cover without the faux leather lool...It is hideous IMO.
sent from my S3, S4 or Note2
Click to expand...
Click to collapse
I'm pretty sure that's a guaranteed, that you will be able to replace the current once for something else.
Will some of the Note II cases fit the Note 3?
Lol..
Let somebody get his hands on a Note 3 first
entwicklun said:
I ended up getting the below. was about 20USD including shipping to me
I also got the below but I got the 3x value pack for 15-20USD including shipping to me. keeping in mind I live in New Zealand so shipping is always the dearest for me compared to rest of world
I'll be happy when these 2 arrive, and hopefully before my note 3, last time I recieved my note 2 before my screen protector, I ended up having that overally large plastic crap with the flap at the end (that it comes on with) for a week lol...
I've always been a fan of spigen, their screen protectors are perfect, it fits around everything with no gaps, unlike some protectors where they get to the home button then just drop vertically down, which means below the home button is open to elements... same with near the front camera etc, above it is open to elements... on other screen protectors I've noticed.
Click to expand...
Click to collapse
Cool case. Sorry you missed out on the Spigen screen protector promo on Amazon.com they had a (4) pack for $1 for a few hours and I ordered (2) of them along with a Glas.tR Slim. I figure its always better to have spares on hand.
yeah just missed out, still though, that price is better than their website price xD
ronaldheld said:
Will some of the Note II cases fit the Note 3?
Click to expand...
Click to collapse
No
Sent from my SGH-i317 Note 2 on Tapatalk 2 - running on Beanstalk powered goodness!!
ronaldheld said:
Will some of the Note II cases fit the Note 3?
Click to expand...
Click to collapse
no they will not the Note III is slimmer and a little taller slightly larger screen.
I ended up ordering one of these
http://www.ebay.com/itm/S-View-Magn...Cell_Phone_PDA_Cases&var=&hash=item25829ff25d
S view magnetic cover
http://www.ebay.com/itm/S-View-Magne...item25829ff25d
Good find, let us know what you think of the quality, fit and finish.
Thanks,
Claude H.
claude4 said:
http://www.ebay.com/itm/S-View-Magne...item25829ff25d
Good find, let us know what you think of the quality, fit and finish.
Thanks,
Claude H.
Click to expand...
Click to collapse
Are they the generic ones?
Sent from my GT-N7100 using xda app-developers app
http://www.amazon.com/gp/aw/d/B00DCIZJ5S/ref=mp_s_a_1_6?qid=1379095467&sr=8-6&pi=AC_SX110_SY165
And there you have it!
Sent from my Galaxy Note II using XDA Premium HD app
Hi all,
As we know, the dual sim version of the beloved Z3 has a different sized flap on the left of device (when facing it), as it houses the microsd and microusb.
Has anyone come across cases that are designed for the Dual yet?
thanks
Look for the Ringke Fusion on Amazon or eBay.
They certainly look like they have a bigger cutout indeed.
Do you already have one? How is it?
sephstyler said:
They certainly look like they have a bigger cutout indeed.
Do you already have one? How is it?
Click to expand...
Click to collapse
I've been using Ringke Fusion covers for the past 2 years, Galaxy S4, S5, Lg G3 and now the Z3, all of them are extremely well done, and since the Galaxy S5 they are using an anti-scratch material that simply works as advertised.
IMHO, the best looking cover and more versatile one for our Z3, the clear one let the beauty of the phone shows and they thought of everything, the cutout fits perfectly for the Dual (Although on the Regular Z3 the cutout seems a little weird and can cause you issues if you have OCD, because for obvious reason it doesn't match perfectly the regular flap) and they even thought on all the Magnetic Chargers and adapters out they left the clearance for it.
What case are you use now?
spacegreyphone said:
What case are you use now?
Click to expand...
Click to collapse
If this was directed to me, I'm using the Ringke Fusion like I mentioned above.
Just got my Ringke Fusions, to be honest, not a huge fan....
they are well constructed, and do seem like high quality, but:
1. I think its a little too thick for my liking
2. back is even more fingerprint magnet than the phone itself.
Anyone seen a thin, plastic back case for a dual?
I have the dual sim and a lot of cases and they all fit ,it has the same dimensions as the regular one .
I have a nillkin case that works great on my dual. All flaps are accessible. However, it doesn't sit well in the dock.
zaki67 said:
I have the dual sim and a lot of cases and they all fit ,it has the same dimensions as the regular one .
Click to expand...
Click to collapse
Zaki, yes, you're right, its got the same PHYSICAL dimensions, but the flap for the charger/microsd port is much larger than the standard Z3, which means cases with a cutout for the charger would have to be a larger cutout.
But does it fit with the bigger port/flap
sephstyler said:
Just got my Ringke Fusions, to be honest, not a huge fan....
they are well constructed, and do seem like high quality, but:
1. I think its a little too thick for my liking
2. back is even more fingerprint magnet than the phone itself.
Anyone seen a thin, plastic back case for a dual?
Click to expand...
Click to collapse
HI sephstyler, did the case fit the dual sim version OK? Were you able to access all the ports ?
antforknee said:
HI sephstyler, did the case fit the dual sim version OK? Were you able to access all the ports ?
Click to expand...
Click to collapse
absolutely. fit is perfect and have access to microUSB, microSD and magnetic port. The flap for the dual sims on the right is blocked - not a hassle unless you take out your sims daily or whatever.
I had also ordered an imak crystal case.
Perfectly clear, very thin, looks great. fits wonderfully too. Also has a wide cut out for charger and sd flap.
Does seem to scuff fairly easily, so the pristine look wont last terribly long.
SGP might be a solution...
erasat said:
If this was directed to me, I'm using the Ringke Fusion like I mentioned above.
Click to expand...
Click to collapse
Hi, could you please send me the link for this case buddy.. Thanks..
arjun.arora said:
Hi, could you please send me the link for this case buddy.. Thanks..
Click to expand...
Click to collapse
http://www.amazon.com/Xperia-Z3-Case-Protection-Absorption/dp/B00NO0WSGC/ref=sr_1_1?ie=UTF8&qid=1419607676&sr=8-1&keywords=Xperia+Z3+Ringke+Fusion
erasat said:
http://www.amazon.com/Xperia-Z3-Case-Protection-Absorption/dp/B00NO0WSGC/ref=sr_1_1?ie=UTF8&qid=1419607676&sr=8-1&keywords=Xperia+Z3+Ringke+Fusion
Click to expand...
Click to collapse
I saw this earlier, the thing is in some screenshots the cutout for micro usb is smaller and in some it is large. I'm really confused.
arjun.arora said:
I saw this earlier, the thing is in some screenshots the cutout for micro usb is smaller and in some it is large. I'm really confused.
Click to expand...
Click to collapse
When they released the first pictures the USB cutout was the small one, for the Single SIM Z3, then they delayed the release and when they finally released it all of the covers were with the larger cutout, as if they decided to do just one cover to fit all versions, Single or dual sim ones.
Last week my friend got one of these for his new D6603 and for our surprise it came with the smaller cutout, perfect fit for the D6603, so right now I really don't know the one that they are going to send or if they simply decided to go back to the original smaller cutout design.
erasat said:
When they released the first pictures the USB cutout was the small one, for the Single SIM Z3, then they delayed the release and when they finally released it all of the covers were with the larger cutout, as if they decided to do just one cover to fit all versions, Single or dual sim ones.
Last week my friend got one of these for his new D6603 and for our surprise it came with the smaller cutout, perfect fit for the D6603, so right now I really don't know the one that they are going to send or if they simply decided to go back to the original smaller cutout design.
Click to expand...
Click to collapse
Well that can't be good for the dual z3 owners.. I currently have the nillkin one.. Its a nice case but doesn't quite offers suitable drop protection..
i have ringke fusion and it has correct cutouts for the dual sim version. Magnetic port good and microsd/charging.
When I was considering buying the S3 and perusing it's forum, I encountered a thread, or threads, that talked about the pro and cons of various cases in respect to magnets contained within them, and potential trouble/interference/distortion of magnets on the screen and S-Pen. So, this is to start a similar discussion on this subject as I have ordered the S4 and will, almost certainly, want to use it with a case of some sort.
I have already ordered the TiMOVO Samsung Galaxy Tab S4 10.5" Case from Amazon https://1n.pm/WDzp1
but wish to see what others are doing/thinking.
I don't that is a bad choice. I like the similarities to my S3 cover. I have the S4 keyboard and it could have been better designed.
UAG case
I'm not really a fan of cases with the flip covers. I was hoping to get something with a kickstand on the back, but most that I found online were flip covers.
I was hoping for a rugged case to come out, but with very limited options I just went to a local gadget store and chose the Urban Armor Gear Exoskeleton 10". The top edges of the screen are slightly covered but with watching movies there's usually a black bar at the top and bottom of the screen so I don't really mind it. The Tab is kind of exposed but there really isn't much bulk when holding it. It has a small kickstand and a slot for the S-pen. It's not perfect but it's working well for me. Amazon has a cheaper price compared to the official UAG website.
I also have the grey model (off-white back) and opted for the black exoskeleton case. I am enjoying the contrast between the tablet and the case.
TiTiB said:
When I was considering buying the S3 and perusing it's forum, I encountered a thread, or threads, that talked about the pro and cons of various cases in respect to magnets contained within them, and potential trouble/interference/distortion of magnets on the screen and S-Pen. So, this is to start a similar discussion on this subject as I have ordered the S4 and will, almost certainly, want to use it with a case of some sort.
I have already ordered the TiMOVO Samsung Galaxy Tab S4 10.5" Case from Amazon https://1n.pm/WDzp1
but wish to see what others are doing/thinking.
Click to expand...
Click to collapse
https://www.amazon.com/Poetic-Flexi...9630&sr=1-16-spons&keywords=tab+s4+case&psc=1
is what I ordered. A case without the Spen slot is worthless.
ScottBroker said:
https://www.amazon.com/Poetic-Flexi...9630&sr=1-16-spons&keywords=tab+s4+case&psc=1
is what I ordered. A case without the Spen slot is worthless.
Click to expand...
Click to collapse
To you, is what you meant. ?
TiTiB said:
To you, is what you meant.
Click to expand...
Click to collapse
To anyone, The s pen is very easy to lose, why would you buy a case that cant hold it?
I picked up the samsung book cover from best buy today(price match amazon $54) seems pretty high quality so far. I wish UAG would make the metropolis case for this tab. That is my favorite tablet case of all time, but seem they only like apple.
I got one from Verizon, it's their brand but it's just like an otter box. No flip cover and surprising thin and nice.
ScottBroker said:
https://www.amazon.com/Poetic-Flexi...9630&sr=1-16-spons&keywords=tab+s4+case&psc=1
is what I ordered. A case without the Spen slot is worthless.
Click to expand...
Click to collapse
have you had issues with the S-Pen and dead spots on the digitizer with this case?
AM Radio said:
have you had issues with the S-Pen and dead spots on the digitizer with this case?
Click to expand...
Click to collapse
None at all
ScottBroker said:
None at all
Click to expand...
Click to collapse
thanks Scott. that's pretty reassuring, as this case would tick a lot of boxes. the S4 (esp the 256GB / 6GB / LTE version) is so damn expensive (and imported), i need to be careful
have you seen this?
https://www.youtube.com/watch?v=nJ9M9LHphyo
user claims "The magnet effect happens over time, and is likely not reversible. I don't recommend using cases w magnet auto sleep."
Stay original! This is s damn expensive device, especially those of us that got the LTE version from start.
I got the Samsung Book Cover, and gonna buy the keyboard cover if there are any black friday deals out. =)
I like the Infiland case because it has a dedicated slot for the pen as well.
delete
corb06 said:
Stay original! This is s damn expensive device, especially those of us that got the LTE version from start.
I got the Samsung Book Cover, and gonna buy the keyboard cover if there are any black friday deals out. =)
Click to expand...
Click to collapse
Does the book cover auto wake?
houstie said:
Does the book cover auto wake?
Click to expand...
Click to collapse
Yes it has! Works 100% of the time. Only minor flaw with tablet is that I often like to have the case in "low profile" and when I am using DEX mode, it wont rotate to fit "low profile".
corb06 said:
Yes it has! Works 100% of the time. Only minor flaw with tablet is that I often like to have the case in "low profile" and when I am using DEX mode, it wont rotate to fit "low profile".
Click to expand...
Click to collapse
Perfect, thanks for confirming.
Having read assorted bits and pieces is this really worth upgrading from the Tab S4, or would it make more sense to wait for the 5G (hopefully next?) version.
I've got three S4s being used for various different tasks, non particularly processor intensive. No gaming.
Thoughts?
pinsb said:
Having read assorted bits and pieces is this really worth upgrading from the Tab S4, or would it make more sense to wait for the 5G (hopefully next?) version.
I've got three S4s being used for various different tasks, non particularly processor intensive. No gaming.
Thoughts?
Click to expand...
Click to collapse
I use my S4 as a laptop replacement when travelling and am getting a LTE S6 tomorrow. The S-855, Adreno 640, UFS 3.0 storage, and 2GB more of RAM aren't just minor performance bumps they are life changing. I get low memory warnings on my S4 using DeX that I'm sure will go away on the S6.
Thinner and lighter is always good and the glass back on the S4 always made it feel fragile so aluminum to me is a plus. I dropped a Tab S3 from 2 feet and its back cracked and I've been paranoid ever since.
I'm not sure how I feel about the S Pen as a deformitive appendage on the back but I like that the OEM cases cover it. Speaking of which the OEM keyboard is enticing if it works. The back piece has failed to adhere for some people that have posted online and that's concerning. Others have commented on how strong it is. Same thing with how easy or not the bottom half stays attached. QC issues? User error? I'll know personally tomorrow.
The other issue with the OEM cases is they've gone back to magnets vs. clips to attach to the tablet. Sleeker look but zero side protection which is what cost me the glass back of my Tab S3. Not thrilled about that.
I'm traveling with the S6 soon and that'll be a true test of it and its paraphernalia. I'll report back.
I came from a tab s4. I think it is worth it. Much better performance. Being lighter has been something I've enjoyed more than I thought. The speakers are a lot better too, the tab s4 was loud but had no bass or depth, tab s6 addresses that with a much deeper sound and bass.
The s pen feels like an upgrade too, nice to have somewhere to attach to the tablet.
Even though the screen is pretty much the same it does feel more immersive because of the slimmer bezels.
Battery life seems very similar for me but battery tests online are coming out as the tab s6 draining less during film streaming etc.
Also worth noting the s6 will get Android 10 quicker.
My Tab S4 is very jittery and laggy when I start using it after a few hours of idling. Things become normal after that and is relatively smooth.
Hopefully Tab S6 won't have this issue a few months down the road
Skipped the s4 because the upgrades from the s3 were not meaningful imo. S3 to S6 is quite the jump in performance and very much worth the upgrade.
As I'm a stockily built guy over 6' 1" to be honest a slightly thinner/lighter unit means nothing to me and from what I've read the performance improvements would be more important to gamers or users doing processor intensive tasks.
As my usage is mainly web browsing, email, some business apps and media consumption (I use Kodi frontend with my mythtv server) using some bluetooth noise cancelling headphones I can't see a critical reason to do the upgrade right now. I must admit though I am tempted to perhaps swap out one or more of my current 64GB S4s for a 256GB S4 which you can currently pick up for circa £450 ($500). The only reason I have three is I occasionally have to do extended travelling and the ability to view media without access to power for 2-3 days is very useful.
However 5G would be a benefit that I would consider important enough to get me to spend my moula.
BarryH_GEG said:
The back piece has failed to adhere for some people that have posted online and that's concerning. Others have commented on how strong it is.
Click to expand...
Click to collapse
I had the problem with the back piece not sticking when I got the keyboard cover last Friday. A quick wipe down of the tablet back and the sticky part of the case with an alcohol swab took care of it. It's not coming off without a lot of determined pulling now.
nicholb said:
I had the problem with the back piece not sticking when I got the keyboard cover last Friday. A quick wipe down of the tablet back and the sticky part of the case with an alcohol swab took care of it. It's not coming off without a lot of determined pulling now.
Click to expand...
Click to collapse
So I'm picking mine up wed. Some of the reviews are conflicting. Is it sticky? or suction? The guy at best buy said it was adhesive, but I got the impression it was more like popsockets?
gottahavit said:
So I'm picking mine up wed. Some of the reviews are conflicting. Is it sticky? or suction? The guy at best buy said it was adhesive, but I got the impression it was more like popsockets?
Click to expand...
Click to collapse
It is a rectangle of sticky material, no suction. Once stuck properly it is very secure.
nicholb said:
I had the problem with the back piece not sticking when I got the keyboard cover last Friday. A quick wipe down of the tablet back and the sticky part of the case with an alcohol swab took care of it. It's not coming off without a lot of determined pulling now.
Click to expand...
Click to collapse
That's what I was thinking the problem was - something between the two surfaces not allowing full adhesion. I swap between cases (keyboard, book cover, TPU) so "determined pulling" is a gift and a curse. There's some debate as to what exactly holds the back kickstand cover to the tablet. Is it magnets? Adhesive? Suction? Some combination? The Tab S3 and S6 are both aluminum and the former had magnetic cases. Curios design this go round.
My Tab S6 arrives today and I've had the keyboard for a week so we shall see.
I switched from the S4 to the S6 and got the keyboard cover for half price with the preorder. I much prefer the metal back in lieu of the glass. I had the keyboard case for the S4 as well. The back of the new one sticks great for me. I put it on immediately after taking the S6 out of the box. It seems much faster in general. Nice to have a current processor in stead of the one from the previous year. I never used Dex much before but it is nice with the track pad. I really like the Surface like kickstand on the back piece of the keyboard cover. I also like having the fingerprint scanner for banking and stuff. The battery life seems better to me even though it is smaller.
nicholb said:
It is a rectangle of sticky material, no suction. Once stuck properly it is very secure.
Click to expand...
Click to collapse
it's not really sticky, I think it is some combination of tack, suction and "maybe"magnets
It is a rubbery adhesion material like what is used in non-suction phone mounts. There are no magnets in the center section, but there are magnets in the sPen flap.
Guys, do you know if the Tab S6 keyboard cover fits the Tab S4??? Can someone try it?
Thanks!
jaz8a said:
Guys, do you know if the Tab S6 keyboard cover fits the Tab S4??? Can someone try it?
Thanks!
Click to expand...
Click to collapse
It will not
Reuben_skelz92 said:
It will not
Click to expand...
Click to collapse
Damn, it would have been cool... Thanks!
jaz8a said:
Guys, do you know if the Tab S6 keyboard cover fits the Tab S4??? Can someone try it?
Thanks!
Click to expand...
Click to collapse
The S6 is a bit smaller. I had both together for a few hours. Also I like the S6 a ton better because of the trackpad and kickstand.
S6's screen is to die for That I can't fault.
scaramonga said:
S6's screen is to die for That I can't fault.
Click to expand...
Click to collapse
Speakers are very good and much improved too
Only reason I would consider the s6 is the extra storage option from 64gb to 128gb.