HELP-mE?
• my gt-i8730 hard brick [qhsusb_dload]
• i am SEND SDCARD debrick.img and put on my sdcard, then...
flashing PIT file on odin, occored this error
Quote:
ODIN:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
PHP:
PHONE:
BOOT RECOVERY MODE
CHECK BOOT PARTITTONS. .
COPY FROM T-FLASH. .
FLASH READ FAILURE
ODIN MODE
PRODUCT NAME: GT-I8730
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: NONE
QUALCOMM SECUREBOOT: ENABLE
SECURE CHECK FAIL: PIT
ERROR: There is no pit binary.
sorry and thanks, i am brazil and noob.
and sorry posted outside the area, but I'm desperate and nobody helps me.
Duplicate of [HELP-ME] MY GT-i8730 HARD BRICKED QHSUSB_DLOAD
Closed.
Related
My phone has gone into emergency recover and I've tried to recover it by flashing it with both "Odin" and the samsung "SimpleUpgradeTool" but it has failed everytime I've tried it.
I have the SCH-530 from US Cellular and am unsure on what to try next.
Any and all help is greatly appreciated.
The following is the ouput message from Odin ---
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
mdahlke said:
My phone has gone into emergency recover and I've tried to recover it by flashing it with both "Odin" and the samsung "SimpleUpgradeTool" but it has failed everytime I've tried it.
I have the SCH-530 from US Cellular and am unsure on what to try next.
Any and all help is greatly appreciated.
The following is the ouput message from Odin ---
Code:
Odin v.3 engine (ID:3)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
cache.img
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
While flashing with odin make sure ur kies is completly closed or from kies tools, preferences, uncheck option open kies while phone connects restart and try should work
Sent from my GT-I9500 using xda premium
I have the SCH-530 from US Cellular and am unsure on what to try next. Wrong forum its not I9300 . Firmware / mods from here will brick your phone . jje
When i came home my phone would bot respond to unlocking the screen so i've pulled the battery and powered on and then the screen was white and full of horizontal lines . At first i thought that there was something wrong with the screen connector becaus the scrreen lokked different when phnone was off charger was plugged in and different than normally turned on. But with hope i've tried booting to recovery again lines. but booting to download mode worked.
Then i've searched over xda and few other sites (mostly linking here)
I've tried flashing single file stock rom:
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
then i've downoaded mx.pit file tried with repartition and there was:
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've pulled battery for 15 min ant the same thing happend.
I even tried updating via KIES in download mode but there was an error . in the begining of the update.
The warranty of the phone was voided few months ago.
Is there anything I can still do at this point (maybe finding proper pit file .... bit i dont know how to match it to my gt-i9300 16GB version)
Will someone better equipped will be able to repair it or i have to brace myself for the cost of a new phone (mainboards are as expensive ad used s3)?
is this what you have ?
przemo-c said:
When i came home my phone would bot respond to unlocking the screen so i've pulled the battery and powered on and then the screen was white and full of horizontal lines . At first i thought that there was something wrong with the screen connector becaus the scrreen lokked different when phnone was off charger was plugged in and different than normally turned on. But with hope i've tried booting to recovery again lines. but booting to download mode worked.
Then i've searched over xda and few other sites (mostly linking here)
I've tried flashing single file stock rom:
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
then i've downoaded mx.pit file tried with repartition and there was:
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've pulled battery for 15 min ant the same thing happend.
I even tried updating via KIES in download mode but there was an error . in the begining of the update.
The warranty of the phone was voided few months ago.
Is there anything I can still do at this point (maybe finding proper pit file .... bit i dont know how to match it to my gt-i9300 16GB version)
Will someone better equipped will be able to repair it or i have to brace myself for the cost of a new phone (mainboards are as expensive ad used s3)?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2379256
idanohh said:
http://forum.xda-developers.com/showthread.php?t=2379256
Click to expand...
Click to collapse
yes that's exactly the same problem
przemo-c said:
yes that's exactly the same problem
Click to expand...
Click to collapse
Well not exactly .. mine doesnt get stuck on :
Code:
Get PIT for mapping..
it goes further but fails anyway.
I downloaded the stock firmware from this thread: http://forum.xda-developers.com/showthread.php?t=2357200
I checked the md5 and it matched up perfectly, so no corrupt download.
I am in Download Mode on my Galaxy S4 SCH-i545 and I have Odin3 v3.07. I placed the extracted .zip file (which is a .tar.md5 file) into the PDA slot in Odin, placed a checkmark in it and clicked start.
I get the following message:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am currently stuck on the yellow exclamation screen on my device and desperately need help as I want to return the device. I have searched the forums and on google but what I have found hasn't helped me.
Thanks for any help!
I really need help and am sorry for replying to myself; however, I have tried everything I have found and nothing has worked. I can only get into download mode and to the yellow exclamation. Odin is failing and nothing shows up in Kies Emergency Recovery.
Don't worry, we can figure this out. Read through the entire thread you posted, the last post in that thread states that the guy was stuck on the yellow exclamation as well, but was relieved for some reason or another. You may find your answer there, and if not, private message that person to ask how they got around it.
What build do you have? MDK or ME7? The link you have is for ME7. If you need MDK, here are two different stock versions.
Why are you flashing this is the big question? Is the screen broken or something?
hi guys.
i have been searching for like 3 days on the internet how to unbrick my phone.
i have a gt-i9300
in odin mode
product name: GT-I9300
Custom binary download: no
Current Binary: Samsung Official
System Status: Custom
Click to expand...
Click to collapse
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i also cant get into recovery mode, i get a banl screen with some stripes.
there are similar questions on the net, but i still have product name in odin mode.
so i was hoping if there is a sollution.
thanks in advance guys
Questions go in the q&a forum, report your own post and ask a moderator to move it.
Search in general forum for rescue firmware, follow the instructions exactly. If this doesn't help then you may need a new motherboard.
Guys i was flashing stock firmware through ODIN, but it failed after install TWRP. Need help as my S6 Edge 925P is stuck and won't boot. One more thing, i can enter download mode just fine.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
My rom version is G925PVPU2BOH1_G925PSPT2BOH1_G925PVPU2BOH1_HOME
Answer seen on this forum to solve the problem is
1) delete the .md5 from the. tar.md5 and open it using winrar
2) extract the firmware..than delete the file from the folder use the new multitool in development thread to make a new tar for Odin..and flash
Can someone please give me step by step direction to do this, please i urgently need help