Hi guys
I repacked @bigbiff 's TWRP Recovery (2.8.7.2) with latest Adam kernel by @wanam , so we got a proper working custom -SELinux permissive- recovery on official Android M bootloader
Bugs;
- Vibration not working
- MTP not working and it can cause ADB failure. Disable it.
THIS IS NOT TWRP-FLASHABLE ZIP!!!
You can install it via Odin. I also uploaded official 6.0.1 bootloader (U3DPAD) if you need.
forumber2 said:
Hi guys
I repacked @bigbiff 's TWRP Recovery (2.8.7.2) with latest Adam kernel by @wanam , so we got a proper working custom -SELinux permissive- recovery on official Android M bootloader
Bugs;
- Vibration not working
- MTP not working and it can cause ADB failure. Disable it.
THIS IS NOT TWRP-FLASHABLE ZIP!!!
You can install it via Odin. I also uploaded official 6.0.1 bootloader (U3DPAD) if you need.
Click to expand...
Click to collapse
This is not official. please update your post.
bigbiff said:
This is not official. please update your post.
Click to expand...
Click to collapse
Sorry,
Done :good:
Really usefull.Thanks pal !
Vibration works here using adam kernel.. thanks for this.
Sent from my SM-G920F using Tapatalk
it is working or not?
Sent from my SM-G920F using Tapatalk
I've tried flashing this, but get an error:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Any idea what I'm doing wrong. I'm on official XEF 6.0.1 with SpaceX RC1 kernel....
Thanks!
---------- Post added at 03:47 PM ---------- Previous post was at 03:38 PM ----------
Vinzie said:
I've tried flashing this, but get an error:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Any idea what I'm doing wrong. I'm on official XEF 6.0.1 with SpaceX RC1 kernel....
Thanks!
Click to expand...
Click to collapse
Never mind... should use AP instead of BL in ODIN... TWRP working correctly now. Thanks for your great work!
is vibration working
Sent from my SM-G920F using Tapatalk
pogi.paul0119 said:
Vibration works here using adam kernel.. thanks for this.
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
Syed Muneeb said:
is vibration working
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
Of course vibration is working on system-side.
It is not working ONLY on TWRP.
forumber2 said:
Of course vibration is working on system-side.
It is not working ONLY on TWRP.
Click to expand...
Click to collapse
i didn't get... when i will flash twrp.. will vibration work on sms calls?
Sent from my SM-G920F using Tapatalk
Syed Muneeb said:
i didn't get... when i will flash twrp.. will vibration work on sms calls?
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
Of course it will work.
forumber2 said:
Of course it will work.
Click to expand...
Click to collapse
i m on official 6.0.1 xef france i flash twrp it stuck on samsung and keep rebooting
Sent from my SM-G920F using Tapatalk
Syed Muneeb said:
i m on official 6.0.1 xef france i flash twrp it stuck on samsung and keep rebooting
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
Flash this zip via TWRP;
https://download.chainfire.eu/897/SuperSU/BETA-SuperSU-v2.67-20160121175247.zip?retrieve_file=1
forumber2 said:
Flash this zip via TWRP;
https://download.chainfire.eu/897/SuperSU/BETA-SuperSU-v2.67-20160121175247.zip?retrieve_file=1
Click to expand...
Click to collapse
how should i flash via twrp.. i flash twrp but its not working. its keep rebooting my phone
Sent from my SM-G920F using Tapatalk
Please test & report. Thank you very much !!!
TeamWin Recovery 3.0/SpaceX Kernel Marshmallow for S6/S6e/Note5
Right now Im running this:
http://forum.xda-developers.com/galaxy-s6/development/g920f-android-marshmallow-6-0-1-beta-t3293941
but I cant go into recovery at all. If i will try to my device will go into a bootloop and I would have to reflash that stock rom.
is it not going to happen once i will flash this?
TWRP v3: http://forum.xda-developers.com/showpost.php?p=65564569&postcount=316
Chainfire said:
TWRP v3: http://forum.xda-developers.com/showpost.php?p=65564569&postcount=316
Click to expand...
Click to collapse
can i flash it with odin ?
Can I use this on the 6.0.1 beta firmware? Will I need to flash new bootloader first?
Sent from my SM-G920F using XDA Free mobile app
saar17 said:
can i flash it with odin ?
Click to expand...
Click to collapse
Yup. Just extract the zip and flash it trough ODIN in AP. done
Related
please excuse me for post here
but i have a big problem,help me that's urgent
i flash 4.3.3 rom to gs3 and i click wrongly on re-partition on odin without a pit file,now still on samsung logo please help me:crying:
rafael1369 said:
please excuse me for post here
but i have a big problem,help me that's urgent
i flash 4.3.3 rom to gs3 and i click wrongly on re-partition on odin without a pit file,now still on samsung logo please help me:crying:
Click to expand...
Click to collapse
Can you get into download mode at all?
help
yes I can go downloading mode.but can't flash the rom .and still in " NAND Write Start!! "
please help me
first of all go to correct thread, not original development which is unreleated
rafael1369 said:
please excuse me for post here
but i have a big problem,help me that's urgent
i flash 4.3.3 rom to gs3 and i click wrongly on re-partition on odin without a pit file,now still on samsung logo please help me:crying:
Click to expand...
Click to collapse
Download official 4.3 tar file and flash it through odin
rafael1369 said:
please excuse me for post here
but i have a big problem,help me that's urgent
i flash 4.3.3 rom to gs3 and i click wrongly on re-partition on odin without a pit file,now still on samsung logo please help me:crying:
Click to expand...
Click to collapse
download your firmware from sammobile
http://www.sammobile.com/firmwares/
select youre device and the region/country where youre from download and install through odin
good luck:good:
Hi there,
Just flashed the wrong ROM for my SM-G361F, So I decided to flashing the STOCK ROM back, but everything goes fine except a hidden.IMG failure on Odin, does annyone know how to fix this?
Thanks in advance!
Try flashing the latest firmware
And dont flash any more roms
Sent from my SM-N910G using Tapatalk
What do I do if i want to go back to stock? Which pit file to flash in odin?
jdog320 said:
What do I do if i want to go back to stock? Which pit file to flash in odin?
Click to expand...
Click to collapse
You can use the stock pit file out of the pit file package from the first post HERE
Or use Lanchon's repitting tool. There is more info on his github page on how to do this
noppy22 said:
You can use the stock pit file out of the pit file package from the first post HERE
did you try the lanchon method?
Click to expand...
Click to collapse
jdog320 said:
did you try the lanchon method?
Click to expand...
Click to collapse
.....yes, it works
hi there so I have a small problem I have a galaxy s6 edge here international version unlocked that won't take any other rom apart from the rom in which I have it running... A Little Background ... the phone itself had a message saying it failed its last update so I downloaded kies and the other new recovery programme non of them would help repair the problem so I downloaded the stock rom and tried to flash via odin and all I get is a fail. it cannot find correct directories . so I then used odin to flash twrp which worked a treat and I downloaded a few roms . one of which worked all others did not ( all got stuck in a boot loop ) so I used a little trick I have used before and changed from ext4 to fat and then back again now this should have replaced all directories again ... however every rom apart from nemesis rom gets stuck in boot loop and odin still fails to flash stock rom ? ..
information of currently running rom
Android version
7.0
Baseband version
G925FXXU5EQD1
Kernel version
3.10.105-NEMESIS_S6_N_V1.2.1
Build Number
G935FXXU1DQB7
Odin log
Get PIT for mapping..
Firmware update start
NAND Write start!!
single download
boot.bin
FAIL!
Complete(Write) operation failed
All threads completed. (succeed 0 /failed 1)
on mobile odin mode shows
sw rev. check fail device 5 binary 3
First off, if Nemesis is working, why do you want to get rid of it?
Secondly, have you tried flashing stock ROM from TWRP? If not, give it a go.
ProdigyThirteen said:
First off, if Nemesis is working, why do you want to get rid of it?
Secondly, have you tried flashing stock ROM from TWRP? If not, give it a go.
Click to expand...
Click to collapse
hey just trying to get rid of it so I can sell on no-one wants to buy it will custom rom for some reason lol
ProdigyThirteen said:
First off, if Nemesis is working, why do you want to get rid of it?
Secondly, have you tried flashing stock ROM from TWRP? If not, give it a go.
Click to expand...
Click to collapse
You can't flash a stock firmware through TWRP.
---------- Post added at 09:20 PM ---------- Previous post was at 09:18 PM ----------
giveusgames said:
hey just trying to get rid of it so I can sell on no-one wants to buy it will custom rom for some reason lol
Click to expand...
Click to collapse
Which stock firmware have you previously tried? Does it always fail at boot.bin?
callumbr1 said:
You can't flash a stock firmware through TWRP.
---------- Post added at 09:20 PM ---------- Previous post was at 09:18 PM ----------
Which stock firmware have you previously tried? Does it always fail at boot.bin?
Click to expand...
Click to collapse
hey yes every time on different stock roms same result
giveusgames said:
hey yes every time on different stock roms same result
Click to expand...
Click to collapse
http://updato.com/firmware-archive-select-model?record=85560321743B11E7963AFA163EE8F90B
Try this one
callumbr1 said:
http://updato.com/firmware-archive-select-model?record=85560321743B11E7963AFA163EE8F90B
Try this one
Click to expand...
Click to collapse
will try this the now thankyou
giveusgames said:
will try this the now thankyou
Click to expand...
Click to collapse
Okay let me know mate :good:
callumbr1 said:
You can't flash a stock firmware through TWRP.
---------- Post added at 09:20 PM ---------- Previous post was at 09:18 PM ----------
Which stock firmware have you previously tried? Does it always fail at boot.bin?
Click to expand...
Click to collapse
Huh. Assumed you could seeing as I can't see any reason why not.
ProdigyThirteen said:
Huh. Assumed you could seeing as I can't see any reason why not.
Click to expand...
Click to collapse
Because while flashing a stock firmware the stock recovery is flashed to the device. Therefore replacing TWRP.
hey sorry for late reply it took a good while to download .. exact same issue as before :/
giveusgames said:
hey sorry for late reply it took a good while to download .. exact same issue as before :/
Click to expand...
Click to collapse
What fail error? Post Odin log please.
Actually try this one I'm pretty sure it will pass
http://updato.com/firmware-archive-select-model?record=EE5467FD616411E7963AFA163EE8F90B
never did get this sorted lol
giveusgames said:
never did get this sorted lol
Click to expand...
Click to collapse
Can you post odin log from when it fails?
same issue on my g925i. some.roms are not done properly. i found 2 that work, rest dont. starting to think the sony xperia is a better phone. samsung is to secured
Stock roms are tricky to find esp. with that device-binary error. Just make sure you pick the correct/related country, device model and android version..
Some roms like Nemesis include their own boot, modem etc. that's why it works, but some don't. I once flashed a stock rom but afterwards I had no imei/modem/signal so the only thing I did was flash all custom roms that I had (NNE, Nemesis, etc) just to replace everything that the stock have put in. After that, downloaded stock firmwares again around 3-5x until I got the correct one (and yes, stock firmwares took hours for me to download).
If you flash MM stock, put in twrp and flash a working custom MM rom, then flash stock through odin. Same goes with Nougat, like flash Nemesis first through twrp then flash stock through odin..
-- this is what I do and I think there are better alternatives to these.
Basically I converted my Galaxy s2 m250s to gt i9100 but how to revert back?
Evie103818 said:
Basically I converted my Galaxy s2 m250s to gt i9100 but how to revert back?
Click to expand...
Click to collapse
Tried Odin to flash stock firmware?
bmwdroid said:
Tried Odin to flash stock firmware?
Click to expand...
Click to collapse
Yes I tried but all I found was a tar.md5 file and I flashed it md5 is invalid and I tried renaming it from tar.md5 to tar but it failed on factoryfs and I don't want the gt i9100 firmware the shw m250s firmware
Evie103818 said:
Yes I tried but all I found was a tar.md5 file and I flashed it md5 is invalid and I tried renaming it from tar.md5 to tar but it failed on factoryfs and I don't want the gt i9100 firmware the shw m250s firmware
Click to expand...
Click to collapse
Search and flash via odin ROM for your SHW-M250S.
samfw.com
sfirmware.com
samfrew.com
etc
ze7zez said:
samfw.com
sfirmware.com
samfrew.com
Click to expand...
Click to collapse
Samfw doesn't have the fw, sfirmware no fw download link and samfrew they didn't have it
ze7zez said:
(...)
etc
Click to expand...
Click to collapse
Samsung SHW-M250S Stock Firmware ROM (Flash File)
Download the official Samsung SHW-M250S Stock Firmware ROM (Flash File) for your Samsung Mobile. We also provide all other Samsung Stock Firmware for free.
firmwarefile.com
Evie103818 said:
Samfw doesn't have the fw, sfirmware no fw download link and samfrew they didn't have it
Click to expand...
Click to collapse
Try
GitHub - ivanmeler/SamFirm_Reborn
Contribute to ivanmeler/SamFirm_Reborn development by creating an account on GitHub.
github.com
This loads firmwares directly from Samsungs servers if it exists there.
Fill in device name and region (look them up here: https://samfrew.com/)
Check "binary nature" and "decryption".
Results in one zip file containing the files for Odin.
ze7zez said:
Samsung SHW-M250S Stock Firmware ROM (Flash File)
Download the official Samsung SHW-M250S Stock Firmware ROM (Flash File) for your Samsung Mobile. We also provide all other Samsung Stock Firmware for free.
firmwarefile.com
Click to expand...
Click to collapse
Sorry, you can't view or download this file at this time error is what i get and i tried this already but it was the same error.
bmwdroid said:
Try
GitHub - ivanmeler/SamFirm_Reborn
Contribute to ivanmeler/SamFirm_Reborn development by creating an account on GitHub.
github.com
This loads firmwares directly from Samsungs servers if it exists there.
Fill in device name and region (look them up here: https://samfrew.com/)
Check "binary nature" and "decryption".
Results in one zip file containing the files for Odin.
Click to expand...
Click to collapse
i got this:
Error: Could not send BinaryInform. Status code 200/400
Request was invalid. Are you sure the input data is correct?
Could not fetch info for SHW-M250S/SKT. Please verify the input or use manual info
reserved
reserved
Evie103818 said:
Yes I tried but all I found was a tar.md5 file and I flashed it md5 is invalid and I tried renaming it from tar.md5 to tar but it failed on factoryfs and I don't want the gt i9100 firmware the shw m250s firmware
Click to expand...
Click to collapse
You need to flash m250s firmware with .pit file and tick repartition in Odin.
I9100 and M250 have different partition size for factoryfs.
the problem is i dont have the firmware
this is the log
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
reserved
Evie103818 said:
the problem is i dont have the firmware
Click to expand...
Click to collapse
Download Firmware for Samsung Galaxy S2 (Korea) SHW-M250S Android Jelly Bean 4.1.2
View Secifications of Samsung Galaxy S2 (Korea) SHW-M250S Mobile and Download Android Jelly Bean 4.1.2 Firmware
samsony.net
Works 100%
i tried that one also it fails on factoryfs.img
Evie103818 said:
i tried that one also it fails on factoryfs.img
Click to expand...
Click to collapse
Which version of Odin are you using?
Have you tried Heimdall?
hemidall is confusing so i use odin
Evie103818 said:
hemidall is confusing so i use odin
Click to expand...
Click to collapse
Odin can't fit factoryfs.img into the phone's memory, so it creates an error message. You have no other solution to your problem but to learn heimdall. Heimdall downloads the correct pit for your model and flashes a single-file ROM.