Need help,
I bought this Tablet from china:
10 inch 8 core Octa Cores MTK6592 2560X1600 ram 4GB ROM 64GB 8.0MP 3G phone call dual sim card Tablet PC Tablets PCS Android5.1
PROBLEMS FOUND:
1- NVRAM ERROR 0X10.....Can be fixed with this useful Forum?
2- WIFI is going wrong. My phone goes ok with full wifi and this Tablet goes connect but with bad signal.
I have extract firmware using mtk droid tools, i can upload, if someone need it for helping me, nearly 3GB.
Please help me to solve problem with my Tablet WIFI signal. Always goes and come, and lower signal tan my phones.
Or if someone have firmware working for ALPS T950S?
Many thanks and please help.
Sale troubles
Hello,
I bought the same tablet and i have the same
I hope someone can help us.
Thx
javilapiedra said:
Need help,
I bought this Tablet from china:
10 inch 8 core Octa Cores MTK6592 2560X1600 ram 4GB ROM 64GB 8.0MP 3G phone call dual sim card Tablet PC Tablets PCS Android5.1
PROBLEMS FOUND:
1- NVRAM ERROR 0X10.....Can be fixed with this useful Forum?
2- WIFI is going wrong. My phone goes ok with full wifi and this Tablet goes connect but with bad signal.
I have extract firmware using mtk droid tools, i can upload, if someone need it for helping me, nearly 3GB.
Please help me to solve problem with my Tablet WIFI signal. Always goes and come, and lower signal tan my phones.
Or if someone have firmware working for ALPS T950S?
Many thanks and please help.
Click to expand...
Click to collapse
Maybe i found solution, try soon, and if it Works, give to you the solution.
javilapiedra said:
Maybe i found solution, try soon, and if it Works, give to you the solution.
Click to expand...
Click to collapse
Thx! I hope it works! Keep me posted.
Grtz
This Works for me:
http://dr-shost.com/tablet/i960/I960-HD_141222_backup_150704-150447.zip
javilapiedra said:
This Works for me:
I'me going to try it.
THX!! :good:
Click to expand...
Click to collapse
Help needed
Hi there, maybe you have the original 950s 6592 firmware? Could you upload or show how to find it? I need Processor Model: 6592. Thx!
need original firmware
javilapiedra said:
Need help,
I bought this Tablet from china:
10 inch 8 core Octa Cores MTK6592 2560X1600 ram 4GB ROM 64GB 8.0MP 3G phone call dual sim card Tablet PC Tablets PCS Android5.1
PROBLEMS FOUND:
1- NVRAM ERROR 0X10.....Can be fixed with this useful Forum?
2- WIFI is going wrong. My phone goes ok with full wifi and this Tablet goes connect but with bad signal.
I have extract firmware using mtk droid tools, i can upload, if someone need it for helping me, nearly 3GB.
Please help me to solve problem with my Tablet WIFI signal. Always goes and come, and lower signal tan my phones.
Or if someone have firmware working for ALPS T950S?
Many thanks and please help.
Click to expand...
Click to collapse
Hi there javilapiedra, have you succeeded in repairing your tablet?
I have the same device, but mine is will not load. Could you please upload original or modified firmware/rom/os?
I would help my a lot. Super thanks in advance.
Related
Hey. I bought this phone from aliexpress:
Reall 1:1 S4 Quad Cord MTK6589 i9500 SIV Android 4.2 12.8MP 1GB +16GB Air Gesture 1920*1080 5Piont Touch Screen
(1.)4.7 inch HD multi-touch Capacitive screen, 1920*1080 resolution
(2.)CPU:MTK6589 Quad core 1.6GHz chipsetis fake real is MTK6572
(3.)Screen color support: 16 million colors
(4.)1GB RAM+16 ROM extend to 32GB max
(5.)single sim,dual mode:GSM 850/900/1800/1900,and 3G WCDMA 2100
WIFI:802.11b/g wireless internet
(7.)13Mega Pixel Camera with Auto focus and Flash light
(8.)Proximity sensor support G-sensor Support 3.5mm stereo audio jack
(9.)Support word,excel,ppt, pdf format document
Unfortunately, when you install CWM was brick. Can someone give a link to the factory rom?
HW: MT6572
Model: GT-I9500
Build number: JDQ39.I9500XUAMDE
Build date utc :20130914-085750
Android in: 4.2.2
Data from the label under the battery:
Model:GT-i9500
FCC ID:A3LGTi9500
Rated:3.8V 1300mA
I've tried a lot of ROM needrom.com but still brick. Error message BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) or NOT NAND FLASH.
I tried all methods of replacing preloader.bin. The only Rom succeeded to flash through SP Flash Tool unfortunately the screen is black (sound, touch, charging function), I can not because I have therefore to cwm to flash through SP or MTK Tool Droids I have not got the right ROM. Can anyone help me? Thank you very much.
martyketchup said:
Hey. I bought this phone from aliexpress:
Reall 1:1 S4 Quad Cord MTK6589 i9500 SIV Android 4.2 12.8MP 1GB +16GB Air Gesture 1920*1080 5Piont Touch Screen
(1.)4.7 inch HD multi-touch Capacitive screen, 1920*1080 resolution
(2.)CPU:MTK6589 Quad core 1.6GHz chipsetis fake real is MTK6572
.....
Unfortunately, when you install CWM was brick. Can someone give a link to the factory rom?
HW: MT6572
Model: GT-I9500
Build number: JDQ39.I9500XUAMDE
Build date utc :20130914-085750
Android in: 4.2.2
Data from the label under the battery:
Model:GT-i9500
FCC ID:A3LGTi9500
Rated:3.8V 1300mA
I've tried a lot of ROM needrom.com but still brick. Error message BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) or NOT NAND FLASH.
I tried all methods of replacing preloader.bin. The only Rom succeeded to flash through SP Flash Tool unfortunately the screen is black (sound, touch, charging function), I can not because I have therefore to cwm to flash through SP or MTK Tool Droids I have not got the right ROM. Can anyone help me? Thank you very much.
Click to expand...
Click to collapse
sorry to hear, once again, backup before messing your phone...
do you mean you bought "Quad Cord MTK6589" but got "dual core MT6572" ?
have you consulted your seller in Aliexpress already, I definitely would, maybe they can help you? many sellers there root the phones ready for their customers, they might have solution for you, if you lucky...
maybe someone more skillful can tell the right prosedure and rom...
---
ceterum censeo, captccha esse delendam. cross-eyed-
Jack_Rover said:
sorry to hear, once again, backup before messing your phone...
do you mean you bought "Quad Cord MTK6589" but got "dual core MT6572" ?
have you consulted your seller in Aliexpress already, I definitely would, maybe they can help you? many sellers there root the phones ready for their customers, they might have solution for you, if you lucky...
maybe someone more skillful can tell the right prosedure and rom...
---
ceterum censeo, captccha esse delendam. cross-eyed-
Click to expand...
Click to collapse
Unfortunately, this is so the dealer is a crook. No communication, I asked the factory ROM but no response. I am glad that phone ever came. I ordered 1 January 2014. 17 February 2014 arrived!! After several reminders. Unfortunately, I was duped.
martyketchup said:
Unfortunately, this is so the dealer is a crook. No communication, I asked the factory ROM but no response. I am glad that phone ever came. I ordered 1 January 2014. 17 February 2014 arrived!! After several reminders. Unfortunately, I was duped.
Click to expand...
Click to collapse
O' dear, too bad.
Have you tried to 'open dispute', or tried to contact Aliexpress and ask help from there? Aliexpress should be responsible for it's sellers, and take actions to help you. Although, it is not easy case, since you have done your own 'adjusting' to the phone...
My orders there have been success, minor 'hick ups' but basicly OK, I choosed seller by good feedback and reputation, had some luck, too.
I'm so new to this android world, can't help you in 'technics', sorry.
Jack_Rover said:
O' dear, too bad.
Have you tried to 'open dispute', or tried to contact Aliexpress and ask help from there? Aliexpress should be responsible for it's sellers, and take actions to help you. Although, it is not easy case, since you have done your own 'adjusting' to the phone...
My orders there have been success, minor 'hick ups' but basicly OK, I choosed seller by good feedback and reputation, had some luck, too.
I'm so new to this android world, can't help you in 'technics', sorry.
Click to expand...
Click to collapse
Hey. The dispute can not be opened because the order has been closed. AliExpress anything because I damaged the phone itself.:crying:
I have a HDC Galaxy Note 3 Sunny II 2+16 octa core, and i stupidly used mtkdroid tools to flash a different boot.img and revovery .img file to it, thinking it would change the boot screen, i got the message that
- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!!
--- Unknown ROM structure, backup NOT possible!
--- ATTENTION! Recovery doesn't suit this phone!
--- Unknown ROM structure, backup NOT possible!
It is stuck in a boot loop, and my pc doesnt recognise it anymore, mtkdroid tools half recognises it with a blue light and jibberish where the model and info should be
and now my phone will not boot, can anyone help please, i'm really stuck with this, i know very little about roms etc, if anyone has the correct boot.img and recovery.img file i would be very grateful
many thanks
Paul
My exact phone is http://www.fastcardtech.com/goods.php?id=10593
HELP
Anyone, what i think i really need is a copy of the rom i can flash through a flash card, not via my pc, sso if anyone has the same phone could you please send me a copy, thanks.
paul0909 said:
Anyone, what i think i really need is a copy of the rom i can flash through a flash card, not via my pc, sso if anyone has the same phone could you please send me a copy, thanks.
Click to expand...
Click to collapse
search for stock rom of your device
Thats what ive been doing and i cant find one flashable via sd card, they all need flashtools, that is why i posted on here to see if anyone could help me
Hi Paul,
I'm no expert in this area althought I've the HDC Galaxy Note 3 Sunny II 3+16. I think that NEEDROM have the stock rom that you need, even I think they can help you in this problem, I hope so!
I'm always afraid to do anything wrong with my phone like root it, that's why I didn't touch it so far because some tool are not 100% trusty and safe!
Best regards,
Pedro
sergiopedro said:
Hi Paul,
I'm no expert in this area althought I've the HDC Galaxy Note 3 Sunny II 3+16. I think that NEEDROM have the stock rom that you need, even I think they can help you in this problem, I hope so!
I'm always afraid to do anything wrong with my phone like root it, that's why I didn't touch it so far because some tool are not 100% trusty and safe!
Best regards,
Pedro
Click to expand...
Click to collapse
Good afternoom I have the same phone ( 3/16) rooted ando no problems...
HDC Galaxys Note 3 Sunny II- MTK6592 Octa Core 1.7GHz 5.7inch FHD IPS OGS Screen 3GB RAM Android 4.3 Phone
anyone have thr 4.4.1 android....
thanks
kitkat
someone have kitekat to this phone ..??? stock....
bodyjoao said:
someone have kitekat to this phone ..??? stock....
Click to expand...
Click to collapse
Here it is http://www.needrom.com/download/hdc-note3-n9000/
featuring kitkat 4.4.2
ROM with some problems...read the comments before anything goes wrong! Is there other?
ROM jellybeam (4.3) origem...
Good at all ...
someone can send me a backup of 4.3 rom, as did the installation of kitkat rom and I have problems with the phone's outer column (without sound) and wanted to do an install of 4.3. to verify that it is giving rom problem ....
already my thanks ....
João
bodyjoao said:
Good afternoom I have the same phone ( 3/16) rooted ando no problems...
HDC Galaxys Note 3 Sunny II- MTK6592 Octa Core 1.7GHz 5.7inch FHD IPS OGS Screen 3GB RAM Android 4.3 Phone
anyone have thr 4.4.1 android....
thanks
Click to expand...
Click to collapse
Hi João,
I still have my stock ROM, I can backup it and send it if you tell me how! Can you sen me the tools and toturial to root my phone too?
Thanks in advance!
Best regards,
Pedro
sergiopedro said:
Hi João,
I still have my stock ROM, I can backup it and send it if you tell me how! Can you sen me the tools and toturial to root my phone too?
Thanks in advance!
Best regards,
Pedro
Click to expand...
Click to collapse
pedro ,portugal ...
root com o vroot...
e depois fazes um backup....
já agora és de onde ....
eu figueira da foz
How to root...
http://forum.xda-developers.com/showthread.php?t=1886460
how to easy backup...
http://www.tecmundo.com.br/backup/4...eu-android-sem-nem-mesmo-precisar-de-root.htm
when you can post or private me ...
thanks
sergiopedro said:
ROM with some problems...read the comments before anything goes wrong! Is there other?
Click to expand...
Click to collapse
The rom run fines for me.
My only and BIG problem that I have is that it gives me low internal memory! It indicates 19GB but when you install 4 or 5 apps the memory is running out of space.
I contacted techsupport ofHDC and told me that a new rom is coming soon with the problem fixed.
Is someone else here encountered and solved this low internal-memory problem?
For me the same problem and the speakers....
Sent from my DAGGER DG550 using XDA Free mobile app
tranaee said:
The rom run fines for me.
My only and BIG problem that I have is that it gives me low internal memory! It indicates 19GB but when you install 4 or 5 apps the memory is running out of space.
I contacted techsupport ofHDC and told me that a new rom is coming soon with the problem fixed.
Is someone else here encountered and solved this low internal-memory problem?
Click to expand...
Click to collapse
Hi tranaee,
Have you tried this ROM update posted on December 10, 2014?
http://www.newestrom.com/rom/hdc-galaxy-note-3-sunnyn9000-upgrade-version/
Hello.
I was wondering if someone here can help me find the official rom for this phone. It is a Lenovo s850c but I think is a fake phone.
I post some photos in case someone have the same phone. I need the official rom as I have flashed it and... bricked it.... (
In spflashtool I can see it has a mtk6582.
It says the display is a ALPS.KK1.MP1.V2.11
Thankyou in advance!!
turbletone said:
Hello.
I was wondering if someone here can help me find the official rom for this phone. It is a Lenovo s850c but I think is a fake phone.
I post some photos in case someone have the same phone. I need the official rom as I have flashed it and... bricked it.... (
In spflashtool I can see it has a mtk6582.
It says the display is a ALPS.KK1.MP1.V2.11
Thankyou in advance!!
Click to expand...
Click to collapse
That's a fake phone for sure. It exists as "JiaYu G5S+" also on AliExpress. Same front with no brand name (first sign of a fake) but different brand names on the back cover. I bet you got it in a blue box also labelled only "Smart Phone"? Funny phone really. I wish I had one to play with to see what kind of apk's it contains to fake AnTuTu score and device info. It also fools CPU-Z to display totally fake hardware info. Did you try CF-Bench? That phone exists as a no fake 80-90$ Elephone P6i. Elephone has a HK based homepage with ROMs and links to other ROMs. Possibly also a MIUI ROM.
http://service.elephone.hk/
http://service.elephone.hk/forum.php?mod=forumdisplay&fid=98#.VF0Y6EtPY7Q
Here is another thread about that phone on this forum:
http://forum.xda-developers.com/android/help/jiayu-g5s-elephone-p6i-guide-t2931900
See Mijue M5000
Hi, I think is the model M5000 Mijue
Actual specifications are:
- MTK6582 Quad Core 1.3GHz
- Android 4.4
- 1GB Ram 8GB Rom
- 5.0 Inch FWVGA 854 * 480 IPS Screen
- 5.0MP Back Camera 0.3MP Front Camera
- Support 3G, GPS, WIFI, Bluetooth, Play Store, Multilanguage, etc
I'd be interested in a rom for this model.
Greetings.
yadhor said:
Hi, I think is the model M5000 Mijue
Actual specifications are:
- MTK6582 Quad Core 1.3GHz
- Android 4.4
- 1GB Ram 8GB Rom
- 5.0 Inch FWVGA 854 * 480 IPS Screen
- 5.0MP Back Camera 0.3MP Front Camera
- Support 3G, GPS, WIFI, Bluetooth, Play Store, Multilanguage, etc
I'd be interested in a rom for this model.
Greetings.
Click to expand...
Click to collapse
Yes, I said it exists as Elephone P6i, wich has those specifications you list. If that hardware is packaged under the name Elephone or Mijue doesn't matter, the inside is manufactured by a few larger OEM factories for all such brands in China. The same inside as the fake Lenovo S850C in this thread exists as Landvo, Star, KingSing, Zoppo and so on also (with very few small variations). These low budget smart phones usually have that in common that a benchmark app will label the manufacturer as "Alps" and/or the firmware as …alps…
Like I wrote in my previous post in this thread, if you have that fake Lenovo S850C you can flash the ROMs for Elephone P6i from the links I posted. There is even a MIUI ROM for that phone, or at least that is what I have been told by people in the business in China. Use Chrome with autotranslation on if you come to a Chinese page (unless you speak Chinese).
Thanks
Thank you very much.
Really I am very grateful with your information and I can get down to work and take advantage of the device.
Greetings.:good:
Stock Rom S850c (Fake device)
mega(dot)co(dot)nz/#!XFxhCZQD!cg6xpwvIEMp0vdx48L1ymq8j_0O4_IVwIEpUjqTywao
Thanks
Thanks for the stock rom.
I have not read much about how to 'cook', but I have done some testing, I flashed the system.img other devices and some have worked, not with all the operating hardware, but have started.
Now it is studying to prepare a rom for the device (and I managed to put the CWM recovery v5).
Thanks for your help.
bricked android
help i need "rom" for this phone
aliexpress.com/item/Lenovo-phone-4G-RAM-16G-ROM-Octa-core-3G-GPS-Android-4-4-4-mtk6592-IPS/32233236860.html?tracelog=back_to_detail_a
my android bricked - no react ,no power
Sorry, I have not identified your model. I do not know how to get it working again.
If you made the backup phone can try to recover it.
To put the rom, it worked for me connect my phone to pc without battery and hold the volume +, hold immediately after connecting the battery button. MTKDroid recognizes and begins to download the files.
Luck.
@kele6a
What did you do with your phone when you bricked it?
That's a fake Lenovo for sure but in a new version that I have not seen before. It has another home button than the usual fake S850C.
But I guess it's the usual fake S850C hardware with a slightly different exterior. It looks more like a Samsung ripoff than an iPhone ripoff.
You should try to flash the ROMs in this thread or go to the Elephone homepage and look for info there. There are instructions for flashing on the Elephone homepage also.
It's very hard to really brick a MediaTek SoC. If I guess right your phone has a MT6582, not a MT6592. It can be an older MT6577 also and then the MT6582 ROM in this thread won't work.
Install the proper MTK drivers in your Win PC and then use SP Flash Tool for flashing (better than MTKDroidTools). The phone must be switched off (not standby, it must be really off) when you flash. Remove the battery to be sure. If you flash the wrong ROM you will only soft-brick the phone, so no big worry.
There is more info in the fake Jiayu G5S+ thread (also the same as Elephone P6i). I suggest you to read that whole thread. You have everything there (probably).
http://forum.xda-developers.com/android/help/jiayu-g5s-elephone-p6i-guide-t2931900
I was lucky to first make a backup with MTKDroid Tools and prepare for FlashTools, with that could resurrect.
I tried to put the rom of elephone p6i and the phone was unusable. Not even picked load, I thought it was broken.
With no reference model I had, I searched several forums as people did to 'revive'. Trying things that I read, and end with a mixture of several got to come back to life.
The most difficult for me is to find ways that FlashTools should recognize the phone to download the rom. From that moment the phone began to work, and now I'm reading to cook a rom for the device.
You have to keep in mind if you use windows 7, XP, windows 8.1 ... to install the drivers, then see which way the mode for firmware (dfu) is activated on your phone ... From what I read many models share the method to enter dfu, look at my previous post and try to see if it works.
If you do not have the backup, I think the first would find someone who may have or who has risen somewhere.
Also if you can find the phone that is clone, you can serve the rom of this. I think that is where you should focus your efforts.
I started looking for the info of MTKDroidTools (MTK6582, 1Gb Ram., android version, kernel version...), then added the type of display you thought was (FWVGA), ... and reviewing photos phones until I gave with which was the original ..., but I don't found a stock rom for this phone. I also helped another user uploaded a copy of the rom terminal in the post (thanks morpheubr).
All this adds patience, I had the phone as you and the end has come back to life. Good luck.
Hey probably I have same fake S850c, i try some ROM and now phone is unusable and I dont have faked rom copy if you have it can you upload it somewhere.
I flash with this ROM www(dot)needrom(dot)com / download / walsun-x1 there is forum post about www(dot)china-devices(dot)com / Thread-Lenovo-S850c-storage-problem
PS. sry but i'm new here and can't post links directly
XnIcRaM said:
Hey probably I have same fake S850c, i try some ROM and now phone is unusable and I dont have faked rom copy if you have it can you upload it somewhere.
I flash with this ROM www(dot)needrom(dot)com / download / walsun-x1 there is forum post about www(dot)china-devices(dot)com / Thread-Lenovo-S850c-storage-problem
PS. sry but i'm new here and can't post links directly
Click to expand...
Click to collapse
Read this thread from the beginning (It's only 2 pages) and you will have answers to your questions.
I try with ROM from morpheubr (post #6) but I got error S_FTHND_FILE_IS_NOT_LOADED_YET
XnIcRaM said:
I try with ROM from morpheubr (post #6) but I got error S_FTHND_FILE_IS_NOT_LOADED_YET
Click to expand...
Click to collapse
Then there is a lot of help in this thread:
http://forum.xda-developers.com/android/help/jiayu-g5s-elephone-p6i-guide-t2931900
Same phone, just another fake name (Jiayu). The thread gets most interesting in the las 2 pages maybe.
Did you write down the original firmware version?
stock rom for FAKE LENOVO S850C (fake build.pro, cpuz, antutu)
Hi, I leave a link to the backup I made to the smartphone when I received it.
The rom is unchanged, comes with build.pro false (lenovo s850c, mtk6592 ...)
https://mega.co.nz/#!7lxUAbKb!bj1mYdbsCQHda4uI-T0uR0nVBLPaVEHGeIWEik3E-LY
morpheubr said:
mega(dot)co(dot)nz/#!XFxhCZQD!cg6xpwvIEMp0vdx48L1ymq8j_0O4_IVwIEpUjqTywao
Click to expand...
Click to collapse
hi..
what is the password for this upload server..? for mega..?
no password need
Hi, I did not put password. ¿To file requests the password?
please, if you ask for password Strengthen me and I will try to upload it to another site that does not ask.
lenovo s850c bricked
kele6a said:
help i need "rom" for this phone
aliexpress.com/item/Lenovo-phone-4G-RAM-16G-ROM-Octa-core-3G-GPS-Android-4-4-4-mtk6592-IPS/32233236860.html?tracelog=back_to_detail_a
my android bricked - no react ,no power
Click to expand...
Click to collapse
conseghiste areglarlo?
tengo uno igual.echame un cable porfavor!
gracias
Somebody is aware where this model has a gps.conf file?
Tablet Specs:
Name: Q88 Plus HD 7"
Codename: Q8H_HD (astar_y3)
Motherboard: Q8H-V1.5 20150129 (this is VERY important in order to find a working firmware!)
CPU: AllWinner A33
Storage: 4GB
RAM: 512MB
Screen: 7" 1024x600
Hi everyone.
I rooted this tablet... Everything was going fine until i changed the DPI and tablet crashed...
So i flashed with Phoenix Card (The flash tool) a wrong firmware and now I can't find the right one... I found a pseudo-working firmware but resolution is wrong (800x480) so the screen is buggy.
I searched a lot and I have found a firmware (It's on YaDisk but XDA doesn't let me post the link) that looks suitable for the tablet BUT... It's the only one that the tool doesn't flash! :crying:
Please... Can you help me in order to find a working firmware for my tablet? Thank you in advance!
Nobody can help me?
Up... If I buy a new one... Can I extract the firmware?
Mario1996 said:
Tablet Specs:
Name: Q88 Plus HD 7"
Codename: Q8H_HD (astar_y3)
Motherboard: Q8H-V1.5 20150129 (this is VERY important in order to find a working firmware!)
CPU: AllWinner A33
Storage: 4GB
RAM: 512MB
Screen: 7" 1024x600
Hi everyone.
I rooted this tablet... Everything was going fine until i changed the DPI and tablet crashed...
So i flashed with Phoenix Card (The flash tool) a wrong firmware and now I can't find the right one... I found a pseudo-working firmware but resolution is wrong (800x480) so the screen is buggy.
I searched a lot and I have found a firmware (It's on YaDisk but XDA doesn't let me post the link) that looks suitable for the tablet BUT... It's the only one that the tool doesn't flash! :crying:
Please... Can you help me in order to find a working firmware for my tablet? Thank you in advance!
Click to expand...
Click to collapse
Hey I also bought the same tab from tinydeal and root it, I tried to put Sony libs etc but it crashed, would be so good if someone has the firmware
And yeah if you buy new same tab then u can extract the firmware and make an impact of it, haha I also flashed a firmware and screen was buggy bcz of 800x480
By the way can you share the firmware you found with private message?
I can test and flash on mine if it does
---------- Post added 05-12-2015 at 12:00 AM ---------- Previous post was 04-12-2015 at 11:37 PM ----------
https://yadi.sk/d/tCD-IyTRY4KRi
U mean this firmware?
dontbelive said:
Hey I also bought the same tab from tinydeal and root it, I tried to put Sony libs etc but it crashed, would be so good if someone has the firmware
And yeah if you buy new same tab then u can extract the firmware and make an impact of it, haha I also flashed a firmware and screen was buggy bcz of 800x480
By the way can you share the firmware you found with private message?
I can test and flash on mine if it does
---------- Post added 05-12-2015 at 12:00 AM ---------- Previous post was 04-12-2015 at 11:37 PM ----------
https://yadi.sk/d/tCD-IyTRY4KRi
U mean this firmware?
Click to expand...
Click to collapse
That firmware is the only one that doesn't flash... Yes, that firmware should bring back to glory our tablet.
If I find again the link of the wrong resolution fw I'll post it here... But also if you find something please share it with me here
Mario1996 said:
That firmware is the only one that doesn't flash... Yes, that firmware should bring back to glory our tablet.
If I find again the link of the wrong resolution fw I'll post it here... But also if you find something please share it with me here
Click to expand...
Click to collapse
Okay will do it
Finally I found a working screen firmware!
http://d.wintouch.cc/software/Q75S/Q75SA51119_1024X600.img
Please, can you test it? On my tablet the touchscreen works but has a wrong offset... Can you test it and provide me a feedback? Just to know if it's an hardware or a firmware related issue
Mario1996 said:
Finally I found a working screen firmware!
http://d.wintouch.cc/software/Q75S/Q75SA51119_1024X600.img
Please, can you test it? On my tablet the touchscreen works but has a wrong offset... Can you test it and provide me a feedback? Just to know if it's an hardware or a firmware related issue
Click to expand...
Click to collapse
I will flash after showeeeer thaaaaanks Hahaha I'm curious now if it works or not
EDIT: i tested and i have same problem as u mentioned the screen offset is wrong also the camera orientation is wrong , its a software problem , but its at least nice to know you found a working software with working screen resolution thanks i will do a research now
Mario1996 said:
Finally I found a working screen firmware!
http://d.wintouch.cc/software/Q75S/Q75SA51119_1024X600.img
Please, can you test it? On my tablet the touchscreen works but has a wrong offset... Can you test it and provide me a feedback? Just to know if it's an hardware or a firmware related issue
Click to expand...
Click to collapse
great NEWS for you buddy i found a fully working firmware compatible with our tablets here is the link download and extract it after u extract delete the chinese letters and flash with phoenixsuite hope it will work for yyou haha it will take a while , first it will be full black it will boot after boot complete it will automatically reboot by it self and it will boot completly normal DDD hahahaa im so happy it working A33 7 Inch 1024x600 q8h v1.5
Please can I have the pw for this file?
densysltd said:
Please can I have the pw for this file?
Click to expand...
Click to collapse
There is no need for password, just click and press download, I don't need any password
Big Thanks!
Why is the filename So very different to what i expect?
Q88 Plus HD A33 7" Firmware ---> Y88Xplus-HT-PH-V1-AL-20150829
Is this the correct firmware?
BigJonMX said:
Why is the filename So very different to what i expect?
Q88 Plus HD A33 7" Firmware ---> Y88Xplus-HT-PH-V1-AL-20150829
Is this the correct firmware?
Click to expand...
Click to collapse
I'm sorry, it's very different... You can't use this one.
it works
Mario1996 said:
I'm sorry, it's very different... You can't use this one.
Click to expand...
Click to collapse
I used this firmware. everything works.
As its for Allwinner A33 (q8h-hd) than it doesn't matter what the brand name is
Ok, I'm happy for you!
Hey guys! i have the same tablet, trying to get working firmware :/ resolution seems to be 1024x600, since it's using the whole screen when updating.
But, when i try to update to this firmware it goes almost half way, and doesn't move from there. i really need one.. :/ can you guys help me? All i know about my tablet:
It's 1024x600, original firmware astar_y3-eng 4.4.2 KVT49L 20151112 test-keys (can't find anywhere), and it is A33 and Q8H tab.
kempoo_ said:
Hey guys! i have the same tablet, trying to get working firmware :/ resolution seems to be 1024x600, since it's using the whole screen when updating.
But, when i try to update to this firmware it goes almost half way, and doesn't move from there. i really need one.. :/ can you guys help me? All i know about my tablet:
It's 1024x600, original firmware astar_y3-eng 4.4.2 KVT49L 20151112 test-keys (can't find anywhere), and it is A33 and Q8H tab.
Click to expand...
Click to collapse
This one will Bring it Back
https://www.amazon.com/clouddrive/s...ncoding=UTF8&mgh=1&ref_=cd_ph_share_link_copy
only camera not working
DIRAR11 said:
This one will Bring it Back
only camera not working
Click to expand...
Click to collapse
Thanks!!
it works
Mario1996 said:
Tablet Specs:
Name: Q88 Plus HD 7"
Codename: Q8H_HD (astar_y3)
Motherboard: Q8H-V1.5 20150129 (this is VERY important in order to find a working firmware!)
CPU: AllWinner A33
Storage: 4GB
RAM: 512MB
Screen: 7" 1024x600
Hi everyone.
I rooted this tablet... Everything was going fine until i changed the DPI and tablet crashed...
So i flashed with Phoenix Card (The flash tool) a wrong firmware and now I can't find the right one... I found a pseudo-working firmware but resolution is wrong (800x480) so the screen is buggy.
I searched a lot and I have found a firmware (It's on YaDisk but XDA doesn't let me post the link) that looks suitable for the tablet BUT... It's the only one that the tool doesn't flash! :crying:
Please... Can you help me in order to find a working firmware for my tablet? Thank you in advance!
Click to expand...
Click to collapse
Hi
I know it has been some time, but can you locate the firmware you refer to above as "pseudo-working, but resolution is wrong (800x480)".
I have a tablet (ZYQ Qtab 704) with the same chip/board specifications, except it is 800x480 resolution, and I have been unable to find the correct firmware.
Any help is appreciated.
Cheers
Edit - see update on next page.
Hello , I am sorry if posting here is wrong but I have got to craziness state searching how to unbrick my tablet.
I bought a tablet from china and wanted to look at how to remove the menu from it. During this process I ended up bricking the thing.
It doesn't turn on . When connected to computer it does the usb sound on and off.
What i know from the system is
mt6582
Andoid 8.0
128GB ram
Build number - ALPS.KK1.MP1.V2.36
model nr - YT886-12
Kernel 3.4.67
I know this because I bought two of them but when I opened them both , the motherboard is slightly different .
The phone/tablet is recognized as N90 which I have no idea what it is.
Please help in any way possible cause I am about to break this thing apart. I have lost 4 days and nights looking for an answer.
Thank you in advance.
Did you manage to fix it ? I have the same problem.
aresgod112 said:
Hello , I am sorry if posting here is wrong but I have got to craziness state searching how to unbrick my tablet.
I bought a tablet from china and wanted to look at how to remove the menu from it. During this process I ended up bricking the thing.
It doesn't turn on . When connected to computer it does the usb sound on and off.
What i know from the system is
mt6582
Andoid 8.0
128GB ram
Build number - ALPS.KK1.MP1.V2.36
model nr - YT886-12
Kernel 3.4.67
I know this because I bought two of them but when I opened them both , the motherboard is slightly different .
The phone/tablet is recognized as N90 which I have no idea what it is.
Please help in any way possible cause I am about to break this thing apart. I have lost 4 days and nights looking for an answer.
Thank you in advance.
Click to expand...
Click to collapse
Looks like I am trying to fix the same device.
I brought mine from China also because of the spec didn't know the firmware was a custom install and doesn't even show android system webview even though Google play store says its installed but it not compatible. I just need a ROM that will work with my device and whatever else I need to put it one my tablet. Normally I can figure this out but I have epilepsy now and it to hard for me to focus.
Model ZL10
Processor MT6582
Firmware ALPS.KK1.MP1 V2.36
Android 8
Ram 8gb
Storage 128gb
10 core
2.5ghz