Related
Hi everyone guys,I'm from Dubai.United Arab Emirates. I'm in trouble.
Maybe i bricked my phone.
I Rooted it, installed TWRP, and then i updated it not with the TWRP.
Since then i have got a bootloop issue, stuck with the Honor logo.
I can access the BOOTLOADER and the stock recovery (i tried to wipe and reset the phone here, but it do all the things and don't solve the problem) and ERecovery (same here i've got an error)
Try to put an update firmware on the MicroSD and make it run but didn't do anything, what can i do
U sure its a bootloop? First boot after update can make about 30 minutes. Anyways Flash stock recovery and try the update with the SDcard.
Demian3112 said:
U sure its a bootloop? First boot after update can make about 30 minutes. Anyways Flash stock recovery and try the update with the SDcard.
Click to expand...
Click to collapse
yes I'm sure its bootloop...
Please tell me how to I can flash stock recovery.how can I update it..
So to clarify you flashed your stock recovery, put your extracted stock firmware on your external sd card under \dload. Then you entered recovery and installed the local update and it did not work?
jonsama585 said:
So to clarify you flashed your stock recovery, put your extracted stock firmware on your external sd card under \dload. Then you entered recovery and installed the local update and it did not work?
Click to expand...
Click to collapse
I'm don't try this.
can u give me this stock recovery download link
What's the exact model ? KIW-L21C432 ?
You don't need the stock recovery, just plug the charger, then the phone will boot on erecovery (second/alternate recovery)
You need the full ROM though, not an update.
If it's a KIW-L21C432, here is the stock ROMs:
KIW-L21 B140
KIW-L21 B330
unzip the dload folder, put it on you sdcard, then bot with the three buttons pressed.
mooms said:
What's the exact model ? KIW-L21C432 ?
You don't need the stock recovery, just plug the charger, then the phone will boot on erecovery (second/alternate recovery)
You need the full ROM though, not an update.
If it's a KIW-L21C432, here is the stock ROMs:
KIW-L21 B140
KIW-L21 B330
unzip the dload folder, put it on you sdcard, then bot with the three buttons pressed.
Click to expand...
Click to collapse
After plug in charger its showing fastboot&rescue mode.
Arobase40 said:
Look at the hihonor website of your country and search for any firmware you could find for your device...
EDIT : you could try to get this one :
http://forum.xda-developers.com/honor-5x/how-to/kiw-l21-c185b130-middle-east-stock-t3408202
Click to expand...
Click to collapse
Thanks..but please tell me how to reflash it???
Thank you arobase for helping this guy out
jonsama585 said:
Thank you arobase for helping this guy out
Click to expand...
Click to collapse
need to unzip this file???
to piggy back on that he may need to extract his stock recovery from the update file, am I mistaken? Since the return to stock update to marshmallow guide does not have his stock recovery in OP.
Arobase40 said:
- Make sure you have a stock recovery
- Unzip the downloaded file
- Remove your sdcard from your phone and plug it into your computer using a sdcard reader.
- Copy the dload folder with the UPDATE.APP file to your sdcard.
- Remove your sdcard properly from your computer and plug it back to your phone.
- make sure you have enough battery, so leave your phone connected to the main power supply.
- Hold Power On+ both Volume buttons at the same time : it could be tricky to pass this process, so you may have to repeat it many times.
- Once done, the update should start !
- Once you get a success message, wait long enough until the process complete.
- You could then search for newer updates.
- Finally, stop using Cyanogenmod if you're a noob.
Click to expand...
Click to collapse
thanks..but I'm already trying it..
huawei software installing..after install 8% showing software install failed
Nahid s said:
Thanks..but please tell me how to reflash it???
Click to expand...
Click to collapse
It should be explained in a PDF file inside the zip.
edit: didn't see it was already answered....
Arobase40 said:
Can you tell us for sure if you have a stock recovery or TWRP in your phone ???
Can you also be honest and tell if you flashed CM13 ?
Click to expand...
Click to collapse
I have stock recovery..and I'm don't flashed cm13
Arobase40 said:
- Make sure you have a stock recovery
- Unzip the downloaded file
- Remove your sdcard from your phone and plug it into your computer using a sdcard reader.
- Copy the dload folder with the UPDATE.APP file to your sdcard.
- Remove your sdcard properly from your computer and plug it back to your phone.
- make sure you have enough battery, so leave your phone connected to the main power supply.
- Hold Power On+ both Volume buttons at the same time : it could be tricky to pass this process, so you may have to repeat it many times.
- Once done, the update should start !
- Once you get a success message, wait long enough until the process complete.
- You could then search for newer updates.
- Finally, stop using Cyanogenmod if you're a noob.
Click to expand...
Click to collapse
Thank you arobase40 Worked for me and my 5x is back running stock firmware again
Arobase40 said:
You're welcome !
Don't forget to push the Thank button, it doesn't hurt.
Click to expand...
Click to collapse
Ok Sir
Hi,(I am spanish sorry about my english)
after a long time searching how to rollback finally I have found the way thanking to this thread https://forum.xda-developers.com/p10/how-to/success-downgrade-oreo-to-nougat-t3729659.
In the thread the way to rollback isn't very extended explained so i decided to create mine and explain easy.
My phone is a Huawei P10 L29c432B.... .
Steps:
1- Download HWOTA8 from--https://drive.google.com/file/d/0B2D9GdWntw69U3N2aDEzZjY2S1E/view
2-Download Firmare L29C900B217 or L09C900B217 depending your model (only are 2 downloads) fromhttp://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29c900&firmware_page=0
3-Delete the row "echo - - update_package...... update_data public. zip..." from the file "META-INF>com>google>android>update-binary" from hwota8_update.zip from the downloaded folder HWOTA8.
4. Create HWOTA8 folder and copy the following files: hwota8_update and MHA_RECOVERY8_NoCheck.img (from HWOTA8 folder), and the downloaded firmware files. After copu the firmware files you have to rename them one has to be named "update.zip" and the other one "update_all_hw.zip" (don't write.zip extension).
5- Now you have to rewrite the recovery with twrp, for that you have to go to fastbood (VOL- and Power) mode and connect to the pc. Then go to Uncompresed HWOTA8 folder and run "Replace_Recovery.bat" after that you will have the recovery TWRP installed.
6- Finally you have to to go to recovery pressing VOL+ and power button then go to Install adn search sd_external and inside HWOTA8 folder from sd card install "hwota8_update.zip". The device will resboot and start installing the nougat rom, but after that you will have to rebrand to L29c432.... to unlock all the functions.
That's all now you will have your device rollbacked from Oreo to Nougat.
Hi!
Thx for this guid, it seems to be clearly and good to understand! I have only one problem: i can not find the row "echo - - update_package...... update_data public. zip..." from the file "META-INF>com>google>android>update-binary" from hwota8_update.zip from the downloaded folder HWOTA8 for changing... ???
I tried with notepad++, but i can not do this... How did you get this step working?
Thx a lot!
stefan.irmen said:
Hi!
Thx for this guid, it seems to be clearly and good to understand! I have only one problem: i can not find the row "echo - - update_package...... update_data public. zip..." from the file "META-INF>com>google>android>update-binary" from hwota8_update.zip from the downloaded folder HWOTA8 for changing...
I tried with notepad++, but i can not do this... How did you get this step working?
Thx a lot!
Click to expand...
Click to collapse
You have to unzip the hwota8_update.zip file into another location, edit the extracted update_binary file and then repack the zip. The update_binary file in HWOTA8_<date>.zip is a binary file and shouldn't be edited with a text editor.
txonan said:
Hi,(I am spanish sorry about my english)
5- Now you have to rewrite the recovery with twrp, for that you have to go to fastbood (VOL- and Power) mode and connect to the pc. Then go to Uncompresed HWOTA8 folder and run "Replace_Recovery.bat" after that you will have the recovery TWRP installed.
6- Finally you have to to go to recovery pressing VOL+ and power button then go to Install adn search sd_external and inside HWOTA8 folder from sd card install "hwota8_update.zip". The device will resboot and start installing the nougat rom, but after that you will have to rebrand to L29c432.... to unlock all the functions.
That's all now you will have your device rollbacked from Oreo to Nougat.
Click to expand...
Click to collapse
hi there guys, i'm having problems with step number 5, i do rewrite twrp with that command, everything seems ok, have no errors, but can't go ionto TWRP like it isn't installed.
i can't run TWRP, can you please help?
pale1505 said:
hi there guys, i'm having problems with step number 5, i do rewrite twrp with that command, everything seems ok, have no errors, but can't go ionto TWRP like it isn't installed.
i can't run TWRP, can you please help?
Click to expand...
Click to collapse
First few times i had the same problem...
When the phone is off an you will hold "Power" and "Volume+" button to boot into TWRP, just hold "Volume+" after phone is vibrating... Then you will boot into TWRP...
stefan.irmen said:
First few times i had the same problem...
When the phone is off an you will hold "Power" and "Volume+" button to boot into TWRP, just hold "Volume+" after phone is vibrating... Then you will boot into TWRP...
Click to expand...
Click to collapse
You have to reinstall twrp and then continue with the steps.
pale1505 said:
hi there guys, i'm having problems with step number 5, i do rewrite twrp with that command, everything seems ok, have no errors, but can't go ionto TWRP like it isn't installed.
i can't run TWRP, can you please help?
Click to expand...
Click to collapse
The fact is that the recovery proccess is a **** in this model. Try to power completely off the phone and the Pess POWER + VOL+ when you feel the phone vibrates retire the press of power button and still pressing VOL+ button by this way sometime it goes ok. If TWRP load go ahead with the followings steps.
Other way it to reinstall again TWRP untill it loads.
Let me know if you suceed, good luck.
4. Create HWOTA8 folder and copy the following files: hwota8_update and MHA_RECOVERY8_NoCheck.img (from HWOTA8 folder), and the downloaded firmware files. After copu the firmware files you have to rename them one has to be named "update.zip" and the other one "update_all_hw.zip" (don't write.zip extension).
2. Download Firmare L29C900B217 or L09C900B217 depending your model (only are 2 downloads) fromhttp://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29c900&firmware_page=0
non-functional link?
How exactly is it to be?
txonan said:
The fact is that the recovery proccess is a **** in this model. Try to power completely off the phone and the Pess POWER + VOL+ when you feel the phone vibrates retire the press of power button and still pressing VOL+ button by this way sometime it goes ok. If TWRP load go ahead with the followings steps.
Other way it to reinstall again TWRP untill it loads.
Let me know if you suceed, good luck.
Click to expand...
Click to collapse
just to let you know that nothing worked,
went to a shop, they tried everything, uploaded older firmwares, but after that the phone died, only black screen, couldn't even switch it on.
warranty did the trick
the guys replaced the mainboard, nothing else helped
so i'm waiting now for the official update
Good day! Can I use this method for installing Official Oreo from Beta? What I would like to do, is skip the deleting of row then just flash the twrp and continue with installation process.
I'm on VTR-L29C636B361.
I would like to rollback to Nougat, for root reasons. I'm trying to follow this method, but I'm not able to find the right files. All I succeded to find is the "update.zip", from Firmware Finder website, but no signs regarding others mentioned ("update_all_hw.zip"). Where can I dowload the right files?
Moreover: I flashed TWRP 3.2.1. I would like to go back on stock recovery, but again I'm facing a lot of problems. I would like to extract from update.app I have (from "update.zip" above mentioned), but HuaweiUpdateExtractor gives me a lot of error. Any help?
Thanks!
pdbc said:
I'm on VTR-L29C636B361.
I would like to rollback to Nougat, for root reasons. I'm trying to follow this method, but I'm not able to find the right files. All I succeded to find is the "update.zip", from Firmware Finder website, but no signs regarding others mentioned ("update_all_hw.zip"). Where can I dowload the right files?
Moreover: I flashed TWRP 3.2.1. I would like to go back on stock recovery, but again I'm facing a lot of problems. I would like to extract from update.app I have (from "update.zip" above mentioned), but HuaweiUpdateExtractor gives me a lot of error. Any help?
Thanks!
Click to expand...
Click to collapse
At the HWFF website the link leads you to you need to click the "filelist" (not only the "update"), that will give you links to all the files needed.
For the rest I am not sure, would also like to get back to the stock recovery but so far found no way to do so...
_Nostromo_ said:
At the HWFF website the link leads you to you need to click the "filelist" (not only the "update"), that will give you links to all the files needed.
For the rest I am not sure, would also like to get back to the stock recovery but so far found no way to do so...
Click to expand...
Click to collapse
I can give you recovery.img and recovery2.img for VTR-L29C636B162. I flashed this and then roll back to Nougat (B172) with FF.
pdbc said:
I can give you recovery.img and recovery2.img for VTR-L29C636B162. I flashed this and then roll back to Nougat (B172) with FF.
Click to expand...
Click to collapse
Thanks a lot for your offer, however unfortunately my model is VTR-L09 so I better do not mess it even more...
how do i edit update-binary? Just odd things comes up with notepad++
Question
txonan said:
Hi,(I am spanish sorry about my english)
after a long time searching how to rollback finally I have found the way thanking to this thread https://forum.xda-developers.com/p10/how-to/success-downgrade-oreo-to-nougat-t3729659.
In the thread the way to rollback isn't very extended explained so i decided to create mine and explain easy.
My phone is a Huawei P10 L29c432B.... .
Steps:
1- Download HWOTA8 from--https://drive.google.com/file/d/0B2D9GdWntw69U3N2aDEzZjY2S1E/view
2-Download Firmare L29C900B217 or L09C900B217 depending your model (only are 2 downloads) fromhttp://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29c900&firmware_page=0
3-Delete the row "echo - - update_package...... update_data public. zip..." from the file "META-INF>com>google>android>update-binary" from hwota8_update.zip from the downloaded folder HWOTA8.
4. Create HWOTA8 folder and copy the following files: hwota8_update and MHA_RECOVERY8_NoCheck.img (from HWOTA8 folder), and the downloaded firmware files. After copu the firmware files you have to rename them one has to be named "update.zip" and the other one "update_all_hw.zip" (don't write.zip extension).
5- Now you have to rewrite the recovery with twrp, for that you have to go to fastbood (VOL- and Power) mode and connect to the pc. Then go to Uncompresed HWOTA8 folder and run "Replace_Recovery.bat" after that you will have the recovery TWRP installed.
6- Finally you have to to go to recovery pressing VOL+ and power button then go to Install adn search sd_external and inside HWOTA8 folder from sd card install "hwota8_update.zip". The device will resboot and start installing the nougat rom, but after that you will have to rebrand to L29c432.... to unlock all the functions.
That's all now you will have your device rollbacked from Oreo to Nougat.
Click to expand...
Click to collapse
Hi, I have one question
Your phone was VTR-L29 C432 and you used the firmware of VTR-L29 C900, so can I use the C900 in any version to rollback and after that, what would be my version? C432 or C900?
I'm asking because for some reason I have VTR-L09 8.0.0.046(04VT) and I want to rollback, then rebrand and finally upgrade to VTR-L29 C432 with a custom kernel.
Thanks a lot!
This guide realy work ??
hello, I test by cons I have a problem, once flash hwota8_update.zip, it tries to restart in recovery and redémre on oreo, a solution?
Hello, I have a problem in the rocovery that I flash wota8_update.zip I have E: unknown command [errno]
Updater process ended with ERROR: 9
Error installing zip file '/external_sd/HWOTA8/update.zip
Maybe this is a silly question. Do we need to change the recovery file since MHA is a code name for MATE 9. P10 use VTR. Is it still usable?
Well, i want to exit of the list of safetynet, i tried magisk safetynet fix, nothing works, this happened after a HOTA Downgrade to Nougat because Oreo (EMUI B330) made me lose too much performance of my Mate 10 Lite (RNE-L03C178) and the APi interpreted the downgrade how a dangerous modification of the system for the apps or in other words a cheating action, i want to exit of the list of the api, i listened with a complete format of a device the safetynet will provide the apps (With SafetyNet block) back in Play Store.
Well i want to format my device with the DLOAD method or other method, could someone explain to me how to do it? (the process of the dload)
Sorry for the grand explanation and my too very bad english, my language is spanish...
Koa1 said:
Well, i want to exit of the list of safetynet, i tried magisk safetynet fix, nothing works, this happened after a HOTA Downgrade to Nougat because Oreo (EMUI B330) made me lose too much performance of my Mate 10 Lite (RNE-L03C178) and the APi interpreted the downgrade how a dangerous modification of the system for the apps or in other words a cheating action, i want to exit of the list of the api, i listened with a complete format of a device the safetynet will provide the apps (With SafetyNet block) back in Play Store.
Well i want to format my device with the DLOAD method or other method, could someone explain to me how to do it? (the process of the dload)
Sorry for the grand explanation and my too very bad english, my language is spanish...
Click to expand...
Click to collapse
In theory, you should download the stock rom from here: http://pro-teammt.ru/firmware-database/
Then, unzip the file and copy UPDATE.APP on your SD card. It has to be in a folder named dload on the root of the card.
Afterwards, reboot on download mode (turn off your phone, then, press volume up + volume down + power button until Huawei logo appears). This should trigger the process to install the app UPDATE.APP file.
If you have TWRP recovery, you will need to go back to your stock recovery (on that... please search on this forum).
I hope this helps!
jeinnerabdel said:
In theory, you should download the stock rom from here: http://pro-teammt.ru/firmware-database/
Then, unzip the file and copy UPDATE.APP on your SD card. It has to be in a folder named dload on the root of the card.
Afterwards, reboot on download mode (turn off your phone, then, press volume up + volume down + power button until Huawei logo appears). This should trigger the process to install the app UPDATE.APP file.
If you have TWRP recovery, you will need to go back to your stock recovery (on that... please search on this forum).
I hope this helps!
Click to expand...
Click to collapse
I'm understanding the next step...the download of all 3 files (update.zip and the others files) of a one file and extract it
Because Firmware Finder gives me 3 zip files and i not understand wich of 3 decompress the update.app
Sorry for my english...again...
jeinnerabdel said:
In theory, you should download the stock rom from here: http://pro-teammt.ru/firmware-database/
Then, unzip the file and copy UPDATE.APP on your SD card. It has to be in a folder named dload on the root of the card.
Afterwards, reboot on download mode (turn off your phone, then, press volume up + volume down + power button until Huawei logo appears). This should trigger the process to install the app UPDATE.APP file.
If you have TWRP recovery, you will need to go back to your stock recovery (on that... please search on this forum).
I hope this helps!
Click to expand...
Click to collapse
I listened about to do this with the 3 update.app files
1.-update.zip
2.-update_data_full_public.zip
3.-update_full_RNE-L03_xxxxx_la.zip
Extract their update.app and install in order
Is this correct?
Koa1 said:
I listened about to do this with the 3 update.app files
1.-update.zip
2.-update_data_full_public.zip
3.-update_full_RNE-L03_xxxxx_la.zip
Extract their update.app and install in order
Is this correct?
Click to expand...
Click to collapse
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
I install in order specified and finally wipe with erecovery, is this correct?
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
And the last question...
What is the diference of a Online Firmware and a Offline Firmware?
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
Nothing, i resolved it, thanks very much!
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
I tried to install it, it stucks at 5% and error message, what i do? Please help...
(Huawei MATE 10 ALP-L09) Hello, I tell you my situation, I am in the emui 8 version with cust 432 in the 150 sp1 version (xloader 1).
I want to try emui 9 so I'm going to switch to xloader 2.
I have the bootloader open and I'll leave it like this to update manually.
I'm going to use the HWOTA system, but when downloading the files of the latest version of emui 9 (version 159) I realize that 3 * .zip files are no longer the same as before, now only 2 files form it. The steps are the same? I put those two files in the Repack folder and then I go to the Ota folder and run the ota.bat ??
And another thing, should we rename those two files as was done before?
Thank you. A greeting.
Koa1 said:
I tried to install it, it stucks at 5% and error message, what i do? Please help...
Click to expand...
Click to collapse
quite old topic i know but i faced the same problem here with my mediapad now. copied all files and update.app to sd card under dload folder but got the error message at 5 percent. there was any solution for this?
artifexor said:
quite old topic i know but i faced the same problem here with my mediapad now. copied all files and update.app to sd card under dload folder but got the error message at 5 percent. there was any solution for this?
Click to expand...
Click to collapse
From dload folder you can flash Service ROM only,
you can download the S. ROM here:
https://androidhost.ru/search.html
Follow the instructions in "ReleaseDoc" . GL!
Warning: this process will erase all the data from your device!!!
bozka1 said:
https://androidhost.ru/search.html
Click to expand...
Click to collapse
Thank you very much! This site contains only service ROM? I have not found any explicit service ROM just regular looking ROM file and some repair ROM but for different region and with password. My current ROM version is BTV-DL09C100B311.
artifexor said:
Thank you very much! This site contains only service ROM? I have not found any explicit service ROM just regular looking ROM file and some repair ROM but for different region and with password. My current ROM version is BTV-DL09C100B311.
Click to expand...
Click to collapse
Yes, only service and board ROM.
Explicit service ROM for your device/ROM version :
https://androidhost.ru/8Xg
bozka1 said:
Yes, only service and board ROM.
Explicit service ROM for your device/ROM version :
https://androidhost.ru/8Xg
Click to expand...
Click to collapse
Is there any service ROM for RNE-L03C178 or C605? I’ve been searching a lot, and well I don’t find anything. And sorry to answer to this old post
Koa1 said:
Is there any service ROM for RNE-L03C178 or C605? I’ve been searching a lot, and well I don’t find anything. And sorry to answer to this old post
Click to expand...
Click to collapse
Enjoy
C605
https://androidhost.ru/311B
https://androidhost.ru/afs
https://androidhost.ru/7AU
C178 (paid service, 17euros )
https://easy-firmware.com/index.php?a=downloads&b=file&id=173660
https://easy-firmware.com/index.php?a=downloads&b=file&id=150819
bozka1 said:
Yes, only service and board ROM.
Explicit service ROM for your device/ROM version :
https://androidhost.ru/8Xg
Click to expand...
Click to collapse
bozka1 said:
Enjoy
C605
https://androidhost.ru/311B
https://androidhost.ru/afs
https://androidhost.ru/7AU
C178 (paid service, 17euros )
https://easy-firmware.com/index.php?a=downloads&b=file&id=173660
https://easy-firmware.com/index.php?a=downloads&b=file&id=150819
Click to expand...
Click to collapse
Thanks! But, do you have the one for Android 7.0?
Koa1 said:
Thanks! But, do you have the one for Android 7.0?
Click to expand...
Click to collapse
For A 7 I don’t find anything on androidhost.ru , try
https://easy-firmware.com/index.php?a=downloads&b=folder&id=31285&p_start=1 .
P.S.: If I may ask, why A7 ?
bozka1 said:
For A 7 I don’t find anything on androidhost.ru , try
https://easy-firmware.com/index.php?a=downloads&b=folder&id=31285&p_start=1 .
P.S.: If I may ask, why A7 ?
Click to expand...
Click to collapse
Because Android 8 in this phone works bad and slow
Koa1 said:
Because Android 8 in this phone works bad and slow
Click to expand...
Click to collapse
Okay, but if You now running A8 , You can downgrade to A7 using HiSuite (Update > Other version) , or, if You have TWRP on board, You can downgrade flashing A7 firmware via HuRupdater 0.4 . It's strongly not recommended downgrade via dload method, it may brick Your phone.
Hello friends
I just want to share how to root A21S stock rom in case anybody needs it:
1. Unlock bootloader
2. (On PC) Extract boot.img.lz4 from AP...tar file, then copy it to phone
3. (On phone) Install ZArchiver to extract boot.img from boot.img.lz4
4. (On phone) Install Magisk_patched_for_A21S.apk (thank grccorps for this excellent magisk) and patch the boot.img that you have just extracted from step 3
5. (On PC) Copy magisk_patched-22104_0x2Ov.img (in phone\download) to pc, rename it to boot.img
6. (On PC) Use 7zip to pack boot.img from step 5 into boot.tar
7. (On PC) Use odin to flash boot.tar from step 6 (in AP slot)
Done. Enjoy.
In case you don't want to do a full step by step like above, you can use my already patched boot.tar below, just download and flash it via odin then after reboot install Magisk_patched_for_A21S.apk
For U3:
https://forum.xda-developers.com/attachments/boot-tar.5299081/
For U5:
boot
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
This apk is old. If you have rooted with this apk/tar, then you should download the latest one from this thread and update to it, as it has the latest patches merged in from official Magisk github.
MY ANDROID 11 A21S STUCK BY FOLLOWING YOUR STEP . AFTER FLASHING ODIN SHOWED PASS AND NOW ITS STUCK, YOUR U5 IS NOT WORKKKK , PLS HELP. , I KNOW HOW TO WORK MY PHONE AGAIN , BUT I NEED ROOT , PLEASE FIX THE ISSUE.
NuzzaimStark said:
MY ANDROID 11 A21S STUCK BY FOLLOWING YOUR STEP . AFTER FLASHING ODIN SHOWED PASS AND NOW ITS STUCK, YOUR U5 IS NOT WORKKKK , PLS HELP. , I KNOW HOW TO WORK MY PHONE AGAIN , BUT I NEED ROOT , PLEASE FIX THE ISSUE.
Click to expand...
Click to collapse
Did you follow exactly 7 steps above ?
thank you so ****ing much, you saved my ass from weeks of hell lmao
Hello, I want to ask, does following these steps wipe my data?
how to know if my phone is u5 or u3 ????? plss
aiman27.john said:
how to know if my phone is u5 or u3 ????? plss
Click to expand...
Click to collapse
Settings \ about phone \ software information
Thank you this works well for my A21s
NuzzaimStark said:
MY ANDROID 11 A21S STUCK BY FOLLOWING YOUR STEP . AFTER FLASHING ODIN SHOWED PASS AND NOW ITS STUCK, YOUR U5 IS NOT WORKKKK , PLS HELP. , I KNOW HOW TO WORK MY PHONE AGAIN , BUT I NEED ROOT , PLEASE FIX THE ISSUE.
Click to expand...
Click to collapse
Hello,
My phone got stuck at the same screen and no button is answering. I also have the U5 version.
How did you manage to recover the phone?
Thank you in advance.
midorocco said:
Hello,
My phone got stuck at the same screen and no button is answering. I also have the U5 version.
How did you manage to recover the phone?
Thank you in advance.
Click to expand...
Click to collapse
Plug usb to laptop, press and hold all buttons (power, volume up, volume down) for 10 seconds your phone will reboot. Release all buttons, then press and hold volume up and volume down and quickly plug usb to phone, your phone will enter download mod where you can flash stock firmware via odin.
I see references to U3 and U5. I have a SM-A215U. Did you mean 5U and not U5? Also, someone asked above if this wipes your data. I too am wondering the same. Thanks!
rbudrick said:
I see references to U3 and U5. I have a SM-A215U. Did you mean 5U and not U5? Also, someone asked above if this wipes your data. I too am wondering the same. Thanks!
Click to expand...
Click to collapse
This is for A217F
thatha said:
This is for A217F
Click to expand...
Click to collapse
Ah thanks. Having trouble finding root instructions for mine, and starting to be somewhat sure they don't exist. So many garbagey sites with bad info. This is the only site I ever see the real deal.
Got my SM-A217F rooted first attempt,
So what i did was.....
1) used Frija-v1.4.4 to download my latest stock firmware "SM-A217F_1_20210807114045_mzeyu27v8u_fac.zip"
2) Extracted the zip file and flashed the 4 files with "Odin3_v3.14.4"
3) after that i let the phone restart and boot up entered my google account details etc etc
4) on PC i used winrar and extracted the "boot.img.lz4" file only from "AP_A217FXXU6CUH1_CL21842546_QB42174009_REV00_user_low_ship_MULTI_CERT_meta_RKEY_OS11.tar.md5"
5) on PC i then used "lz4_win64_v1_9_3" i copied the extracted "boot.img.lz4" file into the "lz4_win64_v1_9_3" folder
6) op PC inside the "lz4_win64_v1_9_3" folder i dragged the "boot.img.lz4" file onto "lz4.exe" wich created a new file "boot.img"
7) copied the "boot.img" file onto my phones internal storage
8) on phone i installed "Magisk_patched_for_A21S.apk" and opened it --> chose "Install" -->"select and patch a file" --> select "boot.img" from step 7 --> normal android way
9) That created a "magisk_patched-22104_0x2Ov.img" file in my phones "download" folder
10) Renamed that "magisk_patched-22104_0x2Ov.img" to "boot.img" on my phone
11) i then used "ZArchiver" and compressed that "boot.img" i just renamed from "boot.img" to "boot.tar"
12) Copied the "boot.tar" file to my pc and renamed it to "boot.img.tar" on my pc
13) On PC i used "Odin3_v3.14.4" and flashed the "boot.img.tar" file to my device, i left "Auto reboot" and "F reset time" ticked
14) after flashing and getting the green "PASS" logo i left my phone pluged into the the pc the whole time while the phone was restarting
15) after phone rebooted i installed "Magisk" with the "Magisk_patched_for_A21S" app --> let it reboot again after install
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
AND THATS IT
ONE A21S SUCCESSFULLY ROOTED
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
NB: thank grccorps for this excellent magisk
How to root a217fxxs7cui3 on 7th bootloader??
Hello. Is it possible to root with android 11 binary 8?
there is no forums for redmi 10
San2005 said:
there is no forums for redmi 10
Click to expand...
Click to collapse
Is that your phone?
[Tutorial] Xiaomi Redmi 10 [Selene] Custom Rom Installation Method [All Error Fixed].
You Want Video turorial ? Cheack This Out;- https://forum.xda-developers.com/t/xiaomi-redmi-10-redmi-10-prime-redmi-10-2022-redmi-10-2021-selene-custom-rom-installation-video-tutorial.4583503/ Tutorial Install Custom rom Selene Requirements ...
forum.xda-developers.com
joke19 said:
Is that your phone?
[Tutorial] Xiaomi Redmi 10 [Selene] Custom Rom Installation Method [All Error Fixed].
You Want Video turorial ? Cheack This Out;- https://forum.xda-developers.com/t/xiaomi-redmi-10-redmi-10-prime-redmi-10-2022-redmi-10-2021-selene-custom-rom-installation-video-tutorial.4583503/ Tutorial Install Custom rom Selene Requirements ...
forum.xda-developers.com
Click to expand...
Click to collapse
yeah but it's for miui 12 and i have miui 13 does updating software remove twrp
San2005 said:
yeah but it's for miui 12 and i have miui 13 does updating software remove twrp
Click to expand...
Click to collapse
How did you get miui 13 mine is stuck on 12.5 and i have some bugs that might get solved with a update.
Try this it is working in Xiaomi redmi 10 Selene in miui 13
fastboot flash boot [name of the file twrp].img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
copy stock boot.img to sdcard or internal and flash it on boot category in twrp
select advanced menu > select install curent twrp
install magisk.zip if you want
Reboot system
If you have any question don't hesitate and go in my direct message, excuse me for my Bad english :/
alan7283 said:
Try this it is working in Xiaomi redmi 10 Selene in miui 13
fastboot flash boot twrp13.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
copy stock boot.img to sdcard or internal and flash it on boot category in twrp
select advanced menu > select install curent twrp
Reboot system
If you prefer orange fox recovery, go in the twrp, flash boot-orangefox.img in the recovery and reboot !
If you have any question don't hesitate and go in my direct message, excuse me for my Bad english
Click to expand...
Click to collapse
You got MIUI 13 ?
Yes
alan7283 said:
Yes
Click to expand...
Click to collapse
Howw ??? OTA ?
No, the update was proposed to me by itself when I was on miui 12.5, however you can always flash it via fastboot, I can make you a tutorial if you want
alan7283 said:
No, the update was proposed to me by itself when I was on miui 12.5, however you can always flash it via fastboot, I can make you a tutorial if you want
Click to expand...
Click to collapse
I would love too but won't I lose warranty?
dda7lite said:
I would love too but won't I lose warranty?
Click to expand...
Click to collapse
Yes but if you relock your bootloader you can get your warranty back so don't worry about it
alan7283 said:
Yes but if you relock your bootloader you can get your warranty back so don't worry about it
Click to expand...
Click to collapse
Your sure? because I can't lose my 3 year warranty
Yes, I'm sure don't worry, but if you flash a rom via fastboot, you lose all the data of the phone, do you accept that?
alan7283 said:
Yes, I'm sure don't worry, but if you flash a rom via fastboot, you lose all the data of the phone, do you accept that?
Click to expand...
Click to collapse
Yeah and I will probably not flash it today I might sent it to warranty first because it's giving me a really weird problem
What problem?
alan7283 said:
What problem?
Click to expand...
Click to collapse
When I plug in charger phone immediately becomes unresponsive, touch stops and won't turn on (only with fingerprint)
Oh okok, no worries probably a screen problem, feel free to come back to me when you are ready
alan7283 said:
Oh okok, no worries probably a screen problem, feel free to come back to me when you are ready
Click to expand...
Click to collapse
You can write the tutorial if you want and I'll save it
dda7lite said:
You can write the tutorial if you want and I'll save it
Click to expand...
Click to collapse
Ok, first you have to unlock the bootloader:
Step 1: Download this file and unzip it. https://androidfilehost.com/?fid=7161016148664849473
Once you have unzipped it, go to the mediatekbootloaderunlock folder and go to the drivers folder, right click on the file "cdc-acm.inf" and then click on install
https://www.technobuzz.net/wp-content/uploads/2022/01/Install-MTK-driver.jpg
Once this is done, go back and install usbdk (x64 for 64 bit OS, x86 for 32 bit OS) on your PC).
https://www.technobuzz.net/wp-content/uploads/2022/01/Instal-USB-drivers-1024x450.jpg
Once this is done, restart your computer (important)
Turn off your redmi 10
In the mediatekbootloaderunlock folder open the "UnlockBootloader.bat" file
Once the file is open, press the volume + and volume - at the same time and once this is done, connect the cable to your PC.
Wait until the window closes.
Your bootloader is now unlocked.
Now that the bootloader of the phone has been unlocked, we will flash the new phone rom.
Step 2: Download the phone rom from this site: https://miuirom.org/phones/redmi-10
(I advise you the Indonesian region)
Once the rom has been downloaded, the rom file ends in .tgz, unzip the rom with WinRAR or any other unzipping tool.
WinRAR
WinRAR - the data compression, encryption and archiving tool for Windows that opens RAR and ZIP files. Compatible with many other file formats.
www.win-rar.com
Once the rom has been decompressed, download Mi Flash tool on this link:
MiFlash20200314
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Unzip the zip file and open the file miflashtool.exe
Once opened, put your phone in fastboot mode (power + volume -)
Connect the phone with a cable to the PC
Click on refresh, the phone should appear.
Then click on select and select the unzipped rom you made earlier.
At the bottom of mi flash tool, click on clean all and lock, this will delete all data and close the bootloader.
Once this is done, click on flash and wait for it to finish.
If you get an error like: checkpoint is not done fastboot lock or something like that, don't worry, it means it worked.
You now have miui 13, enjoy.
alan7283 said:
Ok, first you have to unlock the bootloader:
Step 1: Download this file and unzip it. https://androidfilehost.com/?fid=7161016148664849473
Once you have unzipped it, go to the mediatekbootloaderunlock folder and go to the drivers folder, right click on the file "cdc-acm.inf" and then click on install
https://www.technobuzz.net/wp-content/uploads/2022/01/Install-MTK-driver.jpg
Once this is done, go back and install usbdk (x64 for 64 bit OS, x86 for 32 bit OS) on your PC).
https://www.technobuzz.net/wp-content/uploads/2022/01/Instal-USB-drivers-1024x450.jpg
Once this is done, restart your computer (important)
Turn off your redmi 10
In the mediatekbootloaderunlock folder open the "UnlockBootloader.bat" file
Once the file is open, press the volume + and volume - at the same time and once this is done, connect the cable to your PC.
Wait until the window closes.
Your bootloader is now unlocked.
Now that the bootloader of the phone has been unlocked, we will flash the new phone rom.
Step 2: Download the phone rom from this site: https://miuirom.org/phones/redmi-10
(I advise you the Indonesian region)
Once the rom has been downloaded, the rom file ends in .tgz, unzip the rom with WinRAR or any other unzipping tool.
WinRAR
WinRAR - the data compression, encryption and archiving tool for Windows that opens RAR and ZIP files. Compatible with many other file formats.
www.win-rar.com
Once the rom has been decompressed, download Mi Flash tool on this link:
MiFlash20200314
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Unzip the zip file and open the file miflashtool.exe
Once opened, put your phone in fastboot mode (power + volume -)
Connect the phone with a cable to the PC
Click on refresh, the phone should appear.
Then click on select and select the unzipped rom you made earlier.
At the bottom of mi flash tool, click on clean all and lock, this will delete all data and close the bootloader.
Once this is done, click on flash and wait for it to finish.
If you get an error like: checkpoint is not done fastboot lock or something like that, don't worry, it means it worked.
You now have miui 13, enjoy.
Click to expand...
Click to collapse
I have 2 questions does it work on Redmi 10 2022 and don't it get Bricked if I lock bootloader with other region ?