Verizon xt1528 KK - E 2015 Q&A, Help & Troubleshooting

Was there ever a kitkat stock ROM and was it always 5.1 out of the box? Anyway to down grade or even 5.0 or 5.0.2?

cell2011 said:
Was there ever a kitkat stock ROM and was it always 5.1 out of the box? Anyway to down grade or even 5.0 or 5.0.2?
Click to expand...
Click to collapse
Launched with 5.0.2. Think there are some firmware images in the firmware topic in the General forum. Should be able to downgrade, but I haven't tried it.

I don't think downgrading would work. I updated my XT1521 to Marshmallow, and then tried to roll back to 5.1.1, and the flashing failed every time I tried.

NSDCars5 said:
I don't think downgrading would work. I updated my XT1521 to Marshmallow, and then tried to roll back to 5.1.1, and the flashing failed every time I tried.
Click to expand...
Click to collapse
MM -> LP fails, yeah, but LP -> LP might work.
Looking at Post #3 in this topic, the TC downgraded from XT1528 5.1 to 5.0(.2) to mess around with rooting: http://forum.xda-developers.com/moto-e-2015/general/root-t3194165
Additionally, people have downgraded the XT1527 from 5.1 to 5.0.2 in order to restore LTE Band 12 functionality (search "downgrade"): https://www.reddit.com/r/tmobile/comments/39j0qb/psa_motos_51_update_to_the_2015_moto_e_disables/

xtermmin said:
MM -> LP fails, yeah, but LP -> LP might work.
Looking at Post #3 in this topic, the TC downgraded from XT1528 5.1 to 5.0(.2) to mess around with rooting: http://forum.xda-developers.com/moto-e-2015/general/root-t3194165
Additionally, people have downgraded the XT1527 from 5.1 to 5.0.2 in order to restore LTE Band 12 functionality (search "downgrade"): https://www.reddit.com/r/tmobile/comments/39j0qb/psa_motos_51_update_to_the_2015_moto_e_disables/
Click to expand...
Click to collapse
Hm, maybe. Just in case, look out for any "FAILED" messages while flashing the old firmware - if any, retry that command, or flash back to the newer firmware.

Anyone go through device protection crap? I got a xt1528 from a ebay store that has tons of phones and clean esn. I got it on friday last week and still cant get in. Isnt it just a 72 hr hold or what? Also on the verizon model the message app makes it harder for the workaround and network dialer it dont work esp when youre trying to use this phone as gsm. Not sure how long to wait for the hold though. Do i still need the previous password or email that was synced before i got this phone? I hope not or else this is a brick. Ive factory reset Friday and changed password hoping that would work. Nothing so far

cell2011 said:
Anyone go through device protection crap? I got a xt1528 from a ebay store that has tons of phones and clean esn. I got it on friday last week and still cant get in. Isnt it just a 72 hr hold or what? Also on the verizon model the message app makes it harder for the workaround and network dialer it dont work esp when youre trying to use this phone as gsm. Not sure how long to wait for the hold though. Do i still need the previous password or email that was synced before i got this phone? I hope not or else this is a brick. Ive factory reset Friday and changed password hoping that would work. Nothing so far
Click to expand...
Click to collapse
"Device protection"? If it prompts you for a password on bootup even if you factory reset, then it sounds like it was locked remotely by the Android Device Manager service (original owner might have lost it or something, and remotely locked it). If that's the case, return it.
"Message app makes it harder for the workaround"? What workaround? The Verizon model has both the Hangouts message app and Verizon's Message+ app. You can choose which one you want to use.
"network dialer it dont work esp when youre trying to use this phone as gsm"? The dialer works for GSM, you just have to turn on the GSM radio. Follow the instructions in one of these topics:
http://forum.xda-developers.com/moto-e-2015/general/how-to-verizon-moto-e-2015-gsm-network-t3098953
http://forum.xda-developers.com/moto-e-2015/general/help-confirm-5-1-how-to-verizon-moto-e-t3264258

xtermmin said:
"Device protection"? If it prompts you for a password on bootup even if you factory reset, then it sounds like it was locked remotely by the Android Device Manager service (original owner might have lost it or something, and remotely locked it). If that's the case, return it.
"Message app makes it harder for the workaround"? What workaround? The Verizon model has both the Hangouts message app and Verizon's Message+ app. You can choose which one you want to use.
"network dialer it dont work esp when youre trying to use this phone as gsm"? The dialer works for GSM, you just have to turn on the GSM radio. Follow the instructions in one of these topics:
http://forum.xda-developers.com/moto-e-2015/general/how-to-verizon-moto-e-2015-gsm-network-t3098953. Cant get into hangouts app i only have wifi. Is there any settings app i can sideload
http://forum.xda-developers.com/moto-e-2015/general/help-confirm-5-1-how-to-verizon-moto-e-t3264258
Click to expand...
Click to collapse
I cant get adb to be recognized. I have minimal adb and fastboot everytime i try adb says error device not found. I can only get as far as setup wizard i know all the tricks but even the japanese input language is missing in settings language

cell2011 said:
I cant get adb to be recognized. I have minimal adb and fastboot everytime i try adb says error device not found. I can only get as far as setup wizard i know all the tricks but even the japanese input language is missing in settings language
Click to expand...
Click to collapse
Have you tried installing the Motorola PC drivers and enabling ADB in Developer Options?
As for the Japanese language input, I see it on my XT1528. It's at the very bottom of the list, right before it loops back around to Bahasa Indonesia. (日本語 Nihongo)

I can't get past setup wizard is what I'm saying. And there is no Japanese input the Google one on the keyboard that everyone refers to to get to the 10 key and privacy policy. I know the ultimate goal is to get into dev options. I've been reading. I only have winime for Japanese input for keyboard. The rest is Korean and so forth. Seems to be a newer phone maybe. Today is the 3rd day maybe by 1pm est it will work. I got the phone Fri at 1 PM and reset and changed password. How can I get adb recognized if I don't have USB debugging enabled or unknown sources for the matter. I can't look inside. Stuck at setup wizard or Google protection sign in. Hangouts don't work in shared screen

cell2011 said:
I can't get past setup wizard is what I'm saying. And there is no Japanese input the Google one on the keyboard that everyone refers to to get to the 10 key and privacy policy. I know the ultimate goal is to get into dev options. I've been reading. I only have winime for Japanese input for keyboard. The rest is Korean and so forth. Seems to be a newer phone maybe. Today is the 3rd day maybe by 1pm est it will work. I got the phone Fri at 1 PM and reset and changed password. How can I get adb recognized if I don't have USB debugging enabled or unknown sources for the matter. I can't look inside. Stuck at setup wizard or Google protection sign in. Hangouts don't work in shared screen
Click to expand...
Click to collapse
Sounds like the issue I mentioned earlier. If you can't make it past initial setup due to it asking for a Google account password, then the phone you bought has been locked by the original owner via the Android Device Manager service. The phone you bought might be lost/stolen or the seller is trying to rip you off. Unless the owner left ADB turned on, there's no way around it. Return it and get a new one.

xtermmin said:
Sounds like the issue I mentioned earlier. If you can't make it past initial setup due to it asking for a Google account password, then the phone you bought has been locked by the original owner via the Android Device Manager service. The phone you bought might be lost/stolen or the seller is trying to rip you off. Unless the owner left ADB turned on, there's no way around it. Return it and get a new one.
Click to expand...
Click to collapse
Not even flashing different firmware would work? Or the modem?

cell2011 said:
Not even flashing different firmware would work? Or the modem?
Click to expand...
Click to collapse
Install Moto Device Drivers (download from Motorola).
Boot device into fastboot mode (power off, hold Vol Down, power on).
Connect phone to your computer via USB.
Open command line, go to the Minimal ADB and Fastboot folder.
fastboot.exe devices
If it shows your device, you should be able to downgrade, but I have no clue if this will get around the ADM block.
Follow the stock firmware flash instructions in the General forum: http://forum.xda-developers.com/mot...e-restore-moto-e-2015-stock-firmware-t3044936
If not list or has a weird listing, you won't be able to flash anything. Return it.
Also, flashing modem does absolutely nothing in regards to getting around an ADM block.

Does anyone here have an extra or unlocked for that matter that they can sell. I have 20.00 i can send to someone honest. I use at&t so either xt1528 or unlocked and as long as not on that crazy 72 hour hold sign in crap. That is why im having this problem in the first place. Thanks PM me. Now at 4 days still cant get into my phone. Am i the only one that doesnt have google japanese input? If i had it i know how to bypass. This must be a newer phone all i have is the winime japanese keyboard and that doesnt do anything for me. Im looking for the a with the squirly line to long press i dont have that. I know the method to get to usb debugging etc and factory reset is the goal. But this thing is a brick in my opinion

Be very careful when buying this phone used I'm going on 10 days still have the Google verification on error device was last reset and synced with another account. Xt1528 does not have the bypass or Japanese input keyboard with the (a) to bypass. I've seen all the videos on this model it don't work. Maybe an earlier kernel or build of 5.0 when it first came out but not 5.1. This is just for xt1528 Android 5.1 you been warned. I have a paperweight now

cell2011 said:
Be very careful when buying this phone used I'm going on 10 days still have the Google verification on error device was last reset and synced with another account. Xt1528 does not have the bypass or Japanese input keyboard with the (a) to bypass. I've seen all the videos on this model it don't work. Maybe an earlier kernel or build of 5.0 when it first came out but not 5.1. This is just for xt1528 Android 5.1 you been warned. I have a paperweight now
Click to expand...
Click to collapse
Or just return it and buy one that hasn't been lost/stolen/locked by seller.

xtermmin said:
Or just return it and buy one that hasn't been lost/stolen/locked by seller.
Click to expand...
Click to collapse
Can't. I'm just looking for another now.

cell2011 said:
Not even flashing different firmware would work? Or the modem?
Click to expand...
Click to collapse
I"m in the same situation where I can't bypass the account verification on the xt1528 but in my case it isn't secondhand. The owner isn't tech savvy so they asked someone to setup a google playstore account for them. So when there was problem with the phone and the screen blacked out I factory reset the phone. Everything came back but they don't know the google account that was used so now it's stuck during setup. The japanese keyboard trick doesn't work on this model cause it's not the same one in the tutorials but I was able to get to the dialpad by viewing the motorola privacy policy and following the same instruction. My issue is I can't enable the test mode to activate ADB debugging. *#*#4636#*#* doesn't work.

dknlght said:
I"m in the same situation where I can't bypass the account verification on the xt1528 but in my case it isn't secondhand. The owner isn't tech savvy so they asked someone to setup a google playstore account for them. So when there was problem with the phone and the screen blacked out I factory reset the phone. Everything came back but they don't know the google account that was used so now it's stuck during setup. The japanese keyboard trick doesn't work on this model cause it's not the same one in the tutorials but I was able to get to the dialpad by viewing the motorola privacy policy and following the same instruction. My issue is I can't enable the test mode to activate ADB debugging. *#*#4636#*#* doesn't work.
Click to expand...
Click to collapse
Ive tried that too and its all messed up on the Verizon model. I wonder how many hundreds of phones are paperweights now

cell2011 said:
Ive tried that too and its all messed up on the Verizon model. I wonder how many hundreds of phones are paperweights now
Click to expand...
Click to collapse
man, I have a VRZ paperweight like u. my one is not 2nd hand, I tried with same mail address and password that I used before hard reset. but no luck.
I've re flashed 5.1.1. got same.
now I'm planning to downgrade 5.0. don't know if it'll work or not. coz I was already flashed 5.1.1
plz give me at least one happy news...:crying:

Related

Is there something wrong with my phone?

I just bought my vs987 less than a week ago, and when I install my T-Mobile sim card, I'm able to place calls but I'm unable to use the cellular data. I thought these were supposed to be unlocked? My data works fine when I use the Verizon sim card.
Also, when I first started it up I noticed that my "Software status" said "modified." Does that mean that this phone was previously owned/tampered with? I updated to 7.0 Nougat via Uppercut and LGUP, and now it says "Official." So, I'm a bit alarmed by what was there previously...
Can someone address both of these concerns?
Also, in "About Phone" in the settings menu there is no "Update Center" option. I looked in this video and it appears there.
https://youtu.be/gXeKZ6Dk4Fg
Is that normal, too?
I would appreciate the feedback because I'm a bit anxious due to the fact that Best Buy apparently charges $35 for returns or exchanges on phones. -_-
Do you know if the bootloader is unlocked? Because on some phones when the bootloader is unlocked if causes some problems especially on stock firmwares!
DevCharlie17 said:
Do you know if the bootloader is unlocked? Because on some phones when the bootloader is unlocked if causes some problems especially on stock firmwares!
Click to expand...
Click to collapse
How can I go about verifying whether it's unlocked or not? I swear if something is wrong they better not charge me $35. I will dispute them via my CC company if they do.
Well a simple way is when it boots up it says “bootloader unlocked and visit this link” or something in that nature and a nother way of checking is going into settings - about phone - software info - click build number 8 times - back to settings - developer options... And if enable OEM Unlock is checked... Your bootloader is unlocked
DevCharlie17 said:
Well a simple way is when it boots up it says “bootloader unlocked and visit this link” or something in that nature and a nother way of checking is going into settings - about phone - software info - click build number 8 times - back to settings - developer options... And if enable OEM Unlock is checked... Your bootloader is unlocked
Click to expand...
Click to collapse
I checked and there isn't an option for OEM Unlock in the dev options.
Edit: I think this is because the vs987 isn't rootable.
Hmm well I honestly don't know what could be causing this problem I would suggest finding another official KDZ (don't downgrade) from here http://downloads.codefi.re/autoprime/LG/LG_G5/VS987/VS98711A and if possible factory reset before and after
DevCharlie17 said:
Hmm well I honestly don't know what could be causing this problem I would suggest finding another official KDZ (don't downgrade) from here http://downloads.codefi.re/autoprime/LG/LG_G5/VS987/VS98711A and if possible factory reset before and after
Click to expand...
Click to collapse
Since I'm unable to create a backup of my current state I'd like to use this as a last resort. I'll wait a bit for other responses and if things don't seem good I'll give it a go. Thanks for the help so far. I appreciate it.
No Problem!
Does anyone else have any ideas? I'm running low on time with Best Buy's return policy, so I'd really appreciate it.

ANS UL40 Android 7.1.1 HELP

I have a ANS UL40 phone through Assurance wireless / >Virgin Mobile> Sprint.. and am trying to root this phone so I can get the SPC code to run DFS tools. Have used DFS and loaded phone and unlock with default password, but when I try 000000 spc unlock says device offline and all prompts in all fields go from yellow to red and in a few minutes go back to yellow showing device info.
I need info off this phone to flash my SM-N900P phone over to Assurance Wireless. The UL40 phone uses a sim card, have tried in note 3 but no service and then sim locked please reboot phone. I have tries on UL40 many different rooting apks and through pc. Most say root fail or your phone doesn't seem to be able to root. Any help would be appreciated. To root the ANS UL40 and also how to flash over Note 3. I have done flashing before on a note 2. So i basically know what to do. When I did try to flash over the note 3 I just get your account cannot be verified when calling 611 (without the sim) but when I insert sim its says no sim or sim locked reboot phone. Thanks
Guess nobody knows
kingroot rooted the ans, but I rebooted and it earesed it, and it didn't seem to give out permission s, not in a joking manner
---------- Post added at 01:44 AM ---------- Previous post was at 01:41 AM ----------
lexcin said:
kingroot rooted the ans, but I rebooted and it earesed it, and it didn't seem to give out permission s, not in a joking manner
Click to expand...
Click to collapse
do you know which 32bit drivers this phone might use?
I tried that one and it didn't root it and so many other programs and or apk's. Do not know if this phone is arm -- 64-- or 32. I do know that the maker of the phone actually is Teleepock company in China ** http://www.teleepoch.com/en/ ** no info on this model phone on their website..
Default file manager is CyanogenMod File Manager
mjmplus said:
I have a ANS UL40 phone through Assurance wireless / >Virgin Mobile> Sprint.. and am trying to root this phone so I can get the SPC code to run DFS tools. Have used DFS and loaded phone and unlock with default password, but when I try 000000 spc unlock says device offline and all prompts in all fields go from yellow to red and in a few minutes go back to yellow showing device info.
I need info off this phone to flash my SM-N900P phone over to Assurance Wireless. The UL40 phone uses a sim card, have tried in note 3 but no service and then sim locked please reboot phone. I have tries on UL40 many different rooting apks and through pc. Most say root fail or your phone doesn't seem to be able to root. Any help would be appreciated. To root the ANS UL40 and also how to flash over Note 3. I have done flashing before on a note 2. So i basically know what to do. When I did try to flash over the note 3 I just get your account cannot be verified when calling 611 (without the sim) but when I insert sim its says no sim or sim locked reboot phone. Thanks
Click to expand...
Click to collapse
Hi,
My friend just got the same phone and while setting it up for her I noticed that the default file manager is called CyanogenMod File Manager. It's probably meaningless but thought I'd share it just in case there's some sort of CyanogenMod back door. Good luck and if you do get it rooted please let me know.
I found a paid root that will root UL 40 Assurance choose the 6 mo lan.. https://www.oneclickroot.com/support-packages/
I wouldn't have asked on here if I wanted to pay for it, and they are not a guarantee they can do it. have read somewhere that someone ask them to do the same phone and they could not............ And no still no root. Probably does not matter. Talked to Assurance wireless rep today and they said lots of people are complaining about this phone. I have had in less than 2 weeks of getting it, had to have them warranty it and they sent me the same one. It would reboot on it's own and yes did factory reset. Now have the replacement, haven't done any kind of rooting or anything and on day 2 it starting to not be able to make phone calls. Says phone is not responding. Did a factory reset on this one and still doing same thing. Sometimes it does make a call and sometimes not. Pissed I am....
I stumbled across a site. Idk but it looks like it could contain some valuable info you may need or may be looking for. Send me a message or email me for the link. Since I've not posted before, it won't allow me to post the link.
I have decided to go to another provider for my cell phone and the UL40 phone will be no more. After talking to them so many times and finding they are complete idiots. Because they keep sending me a phone that stops working correctly after 1-3 days. Even before I started trying to root. I even talk to a real English speaking (LOL) person and they told me what I already knew, the ANS UL40 phone is a complete piece of ****. So many people have complained to them about that phone they decided not to ship out anymore. Now what kind of phone i will get from other carrier, I'll have to wait and see. Thanks all.............
mjmplus said:
I have a ANS UL40 phone through Assurance wireless / >Virgin Mobile> Sprint.. and am trying to root this phone so I can get the SPC code to run DFS tools. Have used DFS and loaded phone and unlock with default password, but when I try 000000 spc unlock says device offline and all prompts in all fields go from yellow to red and in a few minutes go back to yellow showing device info.
I need info off this phone to flash my SM-N900P phone over to Assurance Wireless. The UL40 phone uses a sim card, have tried in note 3 but no service and then sim locked please reboot phone. I have tries on UL40 many different rooting apks and through pc. Most say root fail or your phone doesn't seem to be able to root. Any help would be appreciated. To root the ANS UL40 and also how to flash over Note 3. I have done flashing before on a note 2. So i basically know what to do. When I did try to flash over the note 3 I just get your account cannot be verified when calling 611 (without the sim) but when I insert sim its says no sim or sim locked reboot phone. Thanks
Click to expand...
Click to collapse
I have the same phone and I still don't know how to get the MLS code, try enableling the diag ports with ##3424# and hopefully that way you'll get the spc I would let you know if I figure it out
I am looking for a custom ROM for my ANS UL40
Hello.
I was wondering if there would be anyone nice enough to make a custom ROM for the ANS UL40. I would do i tbut I don't have the coding skills or patience to do so.
ANS UL40 "Cast" compatibility w/Actiontec ScreenBeam Mini2
Asking if ANS UL40 "Cast" will run Actiontec ScreenBeam Mini2.
UL40 is "CAST" standard compatible with Mini2 (WiFi Mirocast and INTEL WiDi certified) ?
UL40 able to PARE WiFi and update Mini2 firmware. UL40 says CONNECTED, but click "CAST" and phone goes back to WiFi. Mini2 screen says Connection Failed.
If able to preform firmware update, then UL40 is communicating w/Mini2 so, UL40 should be compatible, but "CAST" fails.
Please advise.
Many kind thanks.
Any luck unlocking this phone so far?
Have not tackled that yet. LEMNO if you succeed.
Best.
RussianIce said:
Any luck unlocking this phone so far?
Click to expand...
Click to collapse
FedCURE said:
Have not tackled that yet. LEMNO if you succeed.
Best.
Click to expand...
Click to collapse
Hope someone can figure out how to gain root access on this phone I have it and It would be a blessing
you can unlock the bootloader in android dev settings "OEM unlocking", once in bootloader cmds like "fastboot oem unlock" or "fastboot flashing unlock" do nothing when connected with usb, what a shame. In recovery (vol up + power) there's an option to mount system, it does but I doubt that can lead to anything root access wise, btw, root noob.
mjmplus said:
... So many people have complained to them about that phone they decided not to ship out anymore...
Click to expand...
Click to collapse
Could you elaborate!?
In which market are you in?
It seems to me that they are still shipping it in many markets Assurance Wireless is in, like Oregon for example... so how did you come by that information?
I got this phone a couple days ago and got my msl code by running adb logcat while dialing ##data# and entering the wrong code, it was 536978 and used this on DFS to change it to 000000 then I was able to access everything once I entered ##diag# and then 000000, and enabled diagnostics. If I can get a working stock firmware or boot IMG I could root through magisk and then do separate fastboot boot (magisk patched)boot.img. I am unable to find a stock firmware for this device if anyone can let me know and I'll have root for us.
jdeandeck said:
I got this phone a couple days ago and got my msl code by running adb logcat while dialing ##data# and entering the wrong code, it was 536978 and used this on DFS to change it to 000000 then I was able to access everything once I entered ##diag# and then 000000, and enabled diagnostics. If I can get a working stock firmware or boot IMG I could root through magisk and then do separate fastboot boot (magisk patched)boot.img. I am unable to find a stock firmware for this device if anyone can let me know and I'll have root for us.
Click to expand...
Click to collapse
Did you ever create a working root? I have this phone as well.
micro sd card
Does anyone know what is the maximum micro sd card supported by this phone?

A10 locked to sprint no oem lock in developer options.

Hi!
New here, hope I am in the right place...I have limited tech skills (born pre cell phones and computers) I did manage to install a custom ROM on an old HTC years ago, and thought I could do it again!
I have a Samsung A10e (SM-A102U) locked to sprint.
I can get the developer options but can't get the OEM unlock option. I also can't wait 7 days. Have tried a few things with the date and turning off updates etc, nothing worked. Here is what I am trying to do in order (please correct me if it is the wrong order) Ultimately I want my phone unlocked for use with any sim, and install a custom rom, to remove some bloatware. Could I wipe the phone totally take it to a piece of memory with no ROM and then re-load it, or use ADB to do it? Please excuse my ignorance - if I sound clueless I kinda am!
1. Unlock the bootloader
2. Install TWRP
3. Install custom ROM
It has taken me days of searching but to no avail, literally pulling my hair out. Happy to buy a beer for anyone that helps!
Wow,thanks...
Response has been overwhelming...
SandsCayman said:
Hi!
New here, hope I am in the right place...I have limited tech skills (born pre cell phones and computers) I did manage to install a custom ROM on an old HTC years ago, and thought I could do it again!
I have a Samsung A10e (SM-A102U) locked to sprint.
I can get the developer options but can't get the OEM unlock option. I also can't wait 7 days. Have tried a few things with the date and turning off updates etc, nothing worked. Here is what I am trying to do in order (please correct me if it is the wrong order) Ultimately I want my phone unlocked for use with any sim, and install a custom rom, to remove some bloatware. Could I wipe the phone totally take it to a piece of memory with no ROM and then re-load it, or use ADB to do it? Please excuse my ignorance - if I sound clueless I kinda am!
1. Unlock the bootloader
2. Install TWRP
3. Install custom ROM
It has taken me days of searching but to no avail, literally pulling my hair out. Happy to buy a beer for anyone that helps!
Click to expand...
Click to collapse
I have the exact same question.
it will not happen alot of us based carriers will lock down the phone via bootloader our best option is to find combination firmware and hopefully find root that way assuming that method still works.
Same situation here with Verizon. And sorry to tell you but I don't think anything will happen for you after seven days either, at least nothing did for me. I've spent a long time trying to get past this with no success, trying every trick I've found (the changing the date manually trick, factory resetting and trying on WiFi, etc.).
Also, using the app "Settings Database Editor," I've found the config/property where OEM bootloader unlock has been disabled:
"sys.oem_unlock_allowed" "0"
Screenshot here.
I'm hoping maybe we can edit that property via ADB or something. I'm not really holding out any hope here though. :-/
One other random discovery (not really helpful or relevant for our OEM bootloader unlock goal, but something I discovered while trying to obtain unlock): I believe I discovered a firmware error (at least on the Verizon build). When you hold volume up + power together for about 30 seconds, the phone shows the recovery menu for a split second but then instantly/immediately wipes all data and factory resets, without ever allowing the user to choose their own recovery menu selection and without giving any reset confirmation prompt before instantly wiping all user data. It's not supposed to work that way, according to the phone's user manual/Samsung technical support instruction. It's actually really pissed me off because I've triggered this instant reset twice now by accident just by having the phone in my back pocket and sitting down. I go to pick up my phone from my pocket and notice the screen is on and then discover everything was wiped. Very annoying! I called Samsung customer support twice to try to explain that I believe there to be a firmware error present (at least on Verizon models) but they didn't seem to care/their support script told them to have me take the device to some local authorized third-party screen repair place. One good outcome I've discovered from factory resetting the phone is that you can at least avoid enrolling the phone in part of the Knox security crap, the "kme" protection. I originally couldn't use remote apps like TeamViewer or AnyDesk without some stupid "Protected by Knox" notification popping up and then my remote app instantly exiting. Made me so angry. But now I'm able to use those apps without any issue. Though, the phone does try to have me agree to enroll in kme protection or whatever about once a day and I have to manually close the enrollment agreement form that pops up.
allenjthomsen said:
it will not happen alot of us based carriers will lock down the phone via bootloader our best option is to find combination firmware and hopefully finwww reset that way assuming that method still works.
Click to expand...
Click to collapse
I've had the same issue with entire A series. All OEM's are disabled regardless of carrier. It seems to be part of Samsung's firmware. After nothing but dead ends and contacting samsung directly i was left scratching my head. Came here searching for some insights I may have overlooked.
-Enable developer options
-Enable wifi
-Join a network
-Change date to 10 days forward
-Reboot phone
-OEM unlock will be available
Thank me later
moe7863 said:
-Enable developer options
-Enable wifi
-Join a network
-Change date to 10 days forward
-Reboot phone
-OEM unlock will be available
Thank me later
Click to expand...
Click to collapse
Nothing happens/doesn't work for Verizon. :-/
I mentioned having tried this technique already in my previous post above.
---------- Post added at 07:42 PM ---------- Previous post was at 07:38 PM ----------
For what it's worth, here's a sister thread I started on this topic with a few responses/potential bootloader unlock ideas shared by other members but no real solid progress made at this point:
https://forum.xda-developers.com/galaxy-a10/help/samsung-galaxy-a10e-to-t3990817/page4
the bl is not unlockable
Bump
I know this is possible I've seen it done before. I think it had to do with a modified ota update.
SHAD0WUSER said:
Bump
I know this is possible I've seen it done before. I think it had to do with a modified ota update.
Click to expand...
Click to collapse
Do you have proof of this being done?
Because as far as I'm aware, it's been impossible to unlock bootloader for years
I actually purchased this phone from Metro last week after searching for it on XDA and seeing that is was BL unlockable. I didn't realize any the time that this was only the international variants. Good luck to all devs whose skillset is better than my own.
ShaDisNX255 said:
Do you have proof of this being done?
Because as far as I'm aware, it's been impossible to unlock bootloader for years
Click to expand...
Click to collapse
it is not possible.. also u cant flash a modified ota cuz it will fail sig check
nateberhardt81 said:
I actually purchased this phone from Metro last week after searching for it on XDA and seeing that is was BL unlockable. I didn't realize any the time that this was only the international variants. Good luck to all devs whose skillset is better than my own.
Click to expand...
Click to collapse
if u looked u would have seen the model numbers are different
elliwigy said:
if u looked u would have seen the model numbers are different
Click to expand...
Click to collapse
Yeah... I I knew better than to just look at a10e and assume they were all the same. I went through the same struggle with a J7 not too long ago... Should have learned my lesson then.
nateberhardt81 said:
Yeah... I I knew better than to just look at a10e and assume they were all the same. I went through the same struggle with a J7 not too long ago... Should have learned my lesson then.
Click to expand...
Click to collapse
no biggie.. at least those r super cheap.. i got a a50 just to brick it to try an exploit that didnt work lol.. o well
I have an A10e as well but the model number is SM-S102DL, I am a complete novice when it comes t phones but will I be able to root this without unlocking the bootloader?
xSpookyx said:
I have an A10e as well but the model number is SM-S102DL, I am a complete novice when it comes t phones but will I be able to root this without unlocking the bootloader?
Click to expand...
Click to collapse
no.. are u sure u have a a10e?
you cant root without exploits that dknt exist without unlocking the bootloader
No matter about root. but I converted many of Samsung A10e to international variant to remove any boost metropcs or any other networks bloatware application.
you can also do it without any issue. Simply flash A102U1 Firmware. I m not sure that it will work on Network Locked/Sim locked devices. I flash and convert it after using a remote unlocking service which already changed the CSC version of EFS to XAA from the BST csc...
XAA is for US Unlocked Without carrier locked phones and BST for Boost mobile carrier only which came with lots of boost bloatwares but maybe that A10e boost remote unlock service saved me.
check the screenshot attached.
Shabby The Dev said:
No matter about root. but I converted many of Samsung A10e to international variant to remove any boost metropcs or any other networks bloatware application.
you can also do it without any issue. Simply flash A102U1 Firmware. I m not sure that it will work on Network Locked/Sim locked devices. I flash and convert it after using a remote unlocking service which already changed the CSC version of EFS to XAA from the BST csc...
XAA is for US Unlocked Without carrier locked phones and BST for Boost mobile carrier only which came with lots of boost bloatwares but maybe that A10e boost remote unlock service saved me.
check the screenshot attached.
Click to expand...
Click to collapse
Careful, don't post your IMEI on the internet as some bad people can do stuff with it

Samsung Galaxy A10e - Is this the right place to be???

Hi!
I recently purchased a Verizon-build Samsung Galaxy A10e (the "economy Flagship" / little-brother of the A10) but XDA has very little information on this phone. Would this be the best place to try to find/request information?
Thanks for your help!
where can i get more developer information on this phone
Give it some time before developers start posting, since the phone was released only a couple of monthes ago. It will be a good minute before you start seeing significant posts for the galaxy a10 e. Keep updating by searching on a regular basis. Check howardforums or android central as well.
On another note:
Some of us need to know the a10e galaxy update to android 10, anyone got then lastest news on that yet? I got one with metro pcs.
Thx
Sent from my SM-A102U using Tapatalk
yea like alot of sites keep saying galaxy a10e will not be getting android 10 and one ui 2.0 but the fail to see samsung own site says they will probavly in may or june of 2020
Also using an SM-A102U device, I believe the official Android 10 date is sometime in the first half of 2020. I believe March.
What would really help us is pHH-Treble support for these devices and Android 10, which I can't find any info for, aside from a GSI post on the Galaxy a20, which has (essentially) the same Exynos chip.
timba123 said:
On the metro variant I was trying to figure out bootloader unlock and the phone vibrated and a yellow exclamation ! Appeared at bottom of black screen. What is that?
Click to expand...
Click to collapse
depends on wat u mean by trying to figure it out lol.. if its like any the other usa variants its not unlockable which is why u dont see oem unlock
timba123 said:
This.
Click to expand...
Click to collapse
i dont kno wat that is but seems to be a indicator for your charger.. maybe not fast charging or something.. i assume the device is off when you get this screen.. if its off and plugged in via pc it could simply be indicating its not fast charging as its being charged from the usb port.
Sent from my SM-N976V using Tapatalk
timba123 said:
It's not off exactly. Kinda reminds me of system crash on eng fac roms. I've seen articles about older devices and it meaning no battery or no charging like you say. Guess I got over excited for nothing lol. Though it might be a hackable situation etc or different mode of some kind.
Click to expand...
Click to collapse
Yea.. and fyi, a common misconception is "eng fac" roms are two completely different things lol.. it's a pet peeve of mine which I owe to all the firmware sites and generic "guides" on the web lol.
They always refer to factory/combo roms as "eng" when they are not eng at all.. fac roms are debuggable (ro.debuggable=1) and permissive and adb enabled by default and dmv disabled with a bare bone os mainly used for testing or fixing issues with the device.
Eng on the other hand is typically a stockish build with su binary by default (allows actual adb root shell) is permissive, verity disabled, contains other high level engineering software etc etc that is supposed to be used by engineers to test their software and things of that nature. My sampwnd root for s8/s8+ for example used eng system.img to gain root. Older devices did have eng boot.img many used to root devices but since s8 and newer they are no longer used because samsung implemented security measures to where u cant flash or run them without an eng token and device being in actual eng mode. Eng tokens are hard to find as they are device specific and need to be generated on samsung servers at which if u can find someone willing to make one they are usually expensive since they need to have a legit business, purchase a signing cert from samsung to be able to generate eng tokens as well as they typically need to also pay for each individual token which just the signing cert alone I've heard various prices from thousands to 100k lol. Then after all that if you have an eng token and device is in eng mode then it's not the same as a bl unlock as you would need to flash eng firmware which is another adventure to locate and probably another pretty penny.
Rant on eng/fac differences is over lmao.
On a side note, I'm working on something that "might" work... according to my dev buddies it will work.. it's a process tho as I need to generate some custom files and I never did this before (I mainly use usa locked snaps) .. but if all goes as planned with some trickery could probably unlock the bl and at the very least root the device.. stay tuned lol
timba123 said:
On the metro variant I was trying to figure out bootloader unlock and the phone vibrated and a yellow exclamation ! Appeared at bottom of black screen. What is that?
Click to expand...
Click to collapse
I also tried (with my limited knowledge here) to enable OEM bootloader unlock by changing the settings flag in the phone but have not had luck. I talk about what I tried to do/have a screenshot showing where the system has it looked in this post:
https://forum.xda-developers.com/ga...rint-oem-lock-developer-t3963898/post80909957
I have also looked at using Tasker/other tools to try to change something here or to see if there's an intent or action or something that will trigger the unlock but haven't had luck.
timba123 said:
So since this is the only A10e root thread. I'll post here. After browsing the internet I found out that Samsung changed some security. Now fac combo cant be flashed with 3.14 odin which newer devices like our A10e will not work with odin 3.13 and before patched or not. A new odin needs to be made. Patched. And the new Security for samsung.
Click to expand...
Click to collapse
This isnt new information. I do not think a new/patched odin will work since it uses a token system. Trying to flash will say you need approval to use factory binary.
With that being said you can use a factory bin token which will then allow you to flash combo rom.
There are ways to bypass need for a token but they are not public.
Also tokens are device specific and if you can find someone to get them they are not free.
Side question that's not totally related but I'm finding conflicting answers online:
Does the A10e NOT have USB-OTG capabilities? :-/
I don't have a USB-C OTG cable to test myself. I realize this phone purposely does not have some features/capabilities that I guess are supposedly deemed more "premium," in order to keep this phone in a class I've heard described as "Economy-Flagship," (lol ). Hence: no wireless charging, no fingerprint reader, no gyroscope, no proximity sensor (this exclusion is kind of annoying - surely I can't be the only person experiencing the annoying phenomenon of chronic cheekbone-call-muting? ). But overall, I'm super happy with this phone!
I also wish I could disable Knox but I don't think that's possible without the OEM bootloader unlock setting enabled.
timba123 said:
No not new info but figured alot of people especially new people could use the info. Lol they sure are locking down phones. I wonder what influence the NSA etc have.
Click to expand...
Click to collapse
govt contracts are definitely a big part of it.. every device manufacturer wants that govt money lol
elliwigy said:
govt contracts are definitely a big part of it.. every device manufacturer wants that govt money lol
Click to expand...
Click to collapse
^This makes a lot of sense.
Sorry for my english. I'm looking for help ... i was 3 weeks in US and i lost my phone. So i buyed this A10e with boost mobile but i didn't activate it because they were trying to force me to buy a monthly subscription, wich i didn't... I bring the phone just for wifi use because is a phone with good specs for the price of 90$... and then the horror shows in a form of Harassing message ... trying to make me "accept terms and conditions" and then Boom the phone was restricted from data usage and other things, i tried to unlock the OEM and nothing, also i wipe the phone and it works fine but it keeps harassing with sudden appears of that screen asking if you accept, the icon of that screen is a peace of chess. So my question is ... Can i force an instalation of other rom? in sammobile is a international rom, so, even if i can't unlock the oem , can i install it? is there a way to root the device without the oem unlock? Thanks in advance
reyesergio23 said:
Sorry for my english. I'm looking for help ... i was 3 weeks in US and i lost my phone. So i buyed this A10e with boost mobile but i didn't activate it because they were trying to force me to buy a monthly subscription, wich i didn't... I bring the phone just for wifi use because is a phone with good specs for the price of 90$... and then the horror shows in a form of Harassing message ... trying to make me "accept terms and conditions" and then Boom the phone was restricted from data usage and other things, i tried to unlock the OEM and nothing, also i wipe the phone and it works fine but it keeps harassing with sudden appears of that screen asking if you accept, the icon of that screen is a peace of chess. So my question is ... Can i force an instalation of other rom? in sammobile is a international rom, so, even if i can't unlock the oem , can i install it? is there a way to root the device without the oem unlock? Thanks in advance
Click to expand...
Click to collapse
no.. bl is locked.. only stock official firmware can be flashed
timba123 said:
Found a rooted AP tar but gives SHA error using Odin 3.14
Click to expand...
Click to collapse
doesnt work.. ur getting error bcuz its modified which cant use bcuz bl is locked
timba123 said:
Seems to be verizon firmware by the bootloader number etc. The firmware I posted pics of. I'd upload it but my browser keeps crashing trying to upload it
---------- Post added at 04:42 AM ---------- Previous post was at 04:25 AM ----------
https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=200612
Looks like root kernel for metro or tmobile
Click to expand...
Click to collapse
correct.. all it is is stock firmware with a rooted/patched kernel for unlockable variants
Combination File, for FRP & bootloop Repair
http://www.mediafire.com/file/ekejzhig7b9zx7r/ROMProvider.COM_SM-A102USQU1ASF1.rar/file
mark332 said:
Combination File, for FRP & bootloop Repair
http://www.mediafire.com/file/ekejzhig7b9zx7r/ROMProvider.COM_SM-A102USQU1ASF1.rar/file
Click to expand...
Click to collapse
how do you expect people to flash it without a factory binary token?
timba123 said:
Is OTP similar or related to the factory token? Like a password?
Click to expand...
Click to collapse
nope.. otp more of a one time password.. the token is something that uses device specific identifiers that then gets sent to a server where it gets signed and sent back.. then it needs to b physically flashed to the device
Sent from my SM-G977P using Tapatalk

recover locked LG G6?

Hi there!
I found an LG G6 with cracked screen in the trash. There was no SIM-Card and no SD-Card in there, but it still seems to work. It has encrypted userdata so I couldn't boot it to see if there's any contact info displayed.
I found I could factory reset the phone by getting into the stock recovery and switching to yes two times.
Now it boots but it will not allow me to enter the phone without giving it an internet connection and logging in with a previously used google account. Since I found this phone and was not able to find out who the previous owner was I of course do not have a google account that was used on the phone previously.
I also booted into fastboot but can't do anything because the bootloader is locked, and it of course was not left by the previous owner with the developer option to allow for unlocking set.
Is there some way to get this phone operational again so it can be used for something more than spare parts (minus the main-board)?
Thank you!
Why dont you flash kdz file? From lg-firware. Com . Oh wait if you cant see imei if you cant get inside phone...
Ah, that's an idea, I will try that. Thank you for the tip. Unsure if a stock ROM flash will reset that google account lock, but I guess it doesn't hurt to try.
hagekic548 said:
Ah, that's an idea, I will try that. Thank you for the tip. Unsure if a stock ROM flash will reset that google account lock, but I guess it doesn't hurt to try.
Click to expand...
Click to collapse
Does it work?
Sadly, no. I tried a few of the LG Tools.
"LG Mobile Support Tool" could connect and told me there is an update available and I should use "LG Bridge" to install that.
"LG Bridge" won't connect because it tells me it requires an MTP connection and I need to allow acccess to "telefon data" if Android 6 or later is installed (which quite certainly is).
Since the phone doesn't let me in (only shows me the first setup wizard which I can't pass without the google account of the previous owner) I can't enable file sharing or accept any requested permissions.
UPDATE: Ah, now I found an "correct update problems" button in "LG Bridge", with this he started downloading 3.28GB worth of firmware, let's see whether he will manage to flash that after downloading it and if so if that does remove the google account lock.
UPDATE2: So I've researched a bit more and found that what my problem is (phone locked to previous google account) is called "FRP Lock" = Factory Reset Protection.
There are a few guides that show how you can use the accesibility feature talkback to get to youtube which allows you to open chrome which allows you to open the phone app. This allowed me to get my IMEI using the *#06# code.
But so far I could not find a phone app code that opens a service menu on this LG G6 H870 which would be required to follow the FRP guides further.
UPDATE3: haha yes the "correct update problems" procedure from "LG Bridge" updated to a newer firmware while leaving my wifi config I've entered during the UPDATE2 step but removing the "FRP Lock".
deleted accidental post
hagekic548 said:
Sadly, no. I tried a few of the LG Tools.
"LG Mobile Support Tool" could connect and told me there is an update available and I should use "LG Bridge" to install that.
"LG Bridge" won't connect because it tells me it requires an MTP connection and I need to allow acccess to "telefon data" if Android 6 or later is installed (which quite certainly is).
Since the phone doesn't let me in (only shows me the first setup wizard which I can't pass without the google account of the previous owner) I can't enable file sharing or accept any requested permissions.
UPDATE: Ah, now I found an "correct update problems" button in "LG Bridge", with this he started downloading 3.28GB worth of firmware, let's see whether he will manage to flash that after downloading it and if so if that does remove the google account lock.
UPDATE2: So I've researched a bit more and found that what my problem is (phone locked to previous google account) is called "FRP Lock" = Factory Reset Protection.
There are a few guides that show how you can use the accesibility feature talkback to get to youtube which allows you to open chrome which allows you to open the phone app. This allowed me to get my IMEI using the *#06# code.
But so far I could not find a phone app code that opens a service menu on this LG G6 H870 which would be required to follow the FRP guides further.
UPDATE3: haha yes the "correct update problems" procedure from "LG Bridge" updated to a newer firmware while leaving my wifi config I've entered during the UPDATE2 step but removing the "FRP Lock".
Click to expand...
Click to collapse
So , you can use it now? If frp lock is removed....
Service menu i know is *#546368#*870# for you. Mine is h873 , but sadky i shouldnt factory reset at first , now i am stuck with no data or call . cannot get sim card configuration settings.
surfshark said:
So , you can use it now? If frp lock is removed....
Click to expand...
Click to collapse
yes, it can be used now, thank you for your help!
The "correct update problems" button in "LG Bridge" did the trick.
The stuff I've described in the "UPDATE2" block was just what I was trying while waiting for the huge download to finish, but it didn't lead to anything. Though it did allow me to get the IMEI by giving me access to youtube, chrome & the phone app.
hagekic548 said:
The "correct update problems" button in "LG Bridge" did the trick.
The stuff I've described in the "UPDATE2" block was just what I was trying while waiting for the huge download to finish, but it didn't lead to anything. Though it did allow me to get the IMEI by giving me access to youtube, chrome & the phone app.
Click to expand...
Click to collapse
Ahh ok! Not many ppl response here. I am new too here but couldnt get any answers i am looking for but. Good that it works for you.
yes, it seems XDA's best days lie behind it sadly. They seem to make it deliberately hard to actually reach the device specific forums instead of their curated blog stuff nowadays.
hagekic548 said:
yes, it seems XDA's best days lie behind it sadly. They seem to make it deliberately hard to actually reach the device specific forums instead of their curated blog stuff nowadays.
Click to expand...
Click to collapse
If you know or came across on this site about how to fix data signal blocked or in other words message and call blocked or how to flash any modem of the g6 without rooting do let me know.
surfshark said:
So , you can use it now? If frp lock is removed....
Service menu i know is *#546368#*870# for you. Mine is h873 , but sadky i shouldnt factory reset at first , now i am stuck with no data or call . cannot get sim card configuration settings.
Click to expand...
Click to collapse
Has anyone had difficulty bypassing from due to being unable to update YouTube? That's the issue I've been having

Categories

Resources