Please Help ;(
i want to connect a PS3 controller to my Prime
i have done the setup (MAC adress)
now i want to Pair it but it says i shoud to tipp the CODE ( 6776) on the controller to Pair ??
wehn i Push the PS3 Button the controller Light are blink (all 4) , some second s later nothing Blink ;(
i have installed de Sixaxis Controller app , but it doesent works ;(
i start Sixaxis and give Root , then the Controller connectet ( Client Connected : 1 ) all lights Blink
some seconds later nothing Blink and ( Client Disconnected : 1 )
only a single light should be lit , but NOTHING lights ;(
i have RESET the Controller but its like before ;(
must i put it in the Dock ?
THANKS FOR ALL
any idear ?
This is the Controller
http://www.ebay.de/itm/160736356269?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Pls Help
Here is what I did:
1. Installed the Sixaxis Controller app, opened it, and found the local bluetooth adress on the bottom-left of the screen.
2. Downloaded and installed Motionjoy Gamepad Tool on my computer.
3. Connected my ps3 controller to my computer using USB, and clicked "BluetoothPair", then "Custom MAC" on Motionjoy.
4. Entered my prime's bluetooth adress, and clicked "Pair Now".
5. Removed the usb cable and went back to my prime and changed input method to "Sixaxis Controller".
6. Clicked "start" and waited for it to say "Successfully Configered Bluetooth" on the sixaxis app.
7. Pressed the home botton on my ps3 controller and voila, it's connected!
kidio007 said:
Here is what I did:
1. Installed the Sixaxis Controller app, opened it, and found the local bluetooth adress on the bottom-left of the screen.
2. Downloaded and installed Motionjoy Gamepad Tool on my computer.
3. Connected my ps3 controller to my computer using USB, and clicked "BluetoothPair", then "Custom MAC" on Motionjoy.
4. Entered my prime's bluetooth adress, and clicked "Pair Now".
5. Removed the usb cable and went back to my prime and changed input method to "Sixaxis Controller".
6. Clicked "start" and waited for it to say "Successfully Configered Bluetooth" on the sixaxis app.
7. Pressed the home botton on my ps3 controller and voila, it's connected!
Click to expand...
Click to collapse
THANKS a lot ,
but it doesn´t work for me ;(
i have done all from your HOW TO , but ...
i start Sixaxis , then the Controller connectet ( Client Connected : 1 ) all lights Blink
BUT some seconds later nothing Blink and ( Client Disconnected : 1 )
PLEASE HELP
Ok. When you connect the ps3 controller to the computer and open Motionjoy and click BluetoothPair, does it say "Have paired to:" then the bluetooth adress next to it? Since it does say "Client Connected" once, then I think you got the setup right though.
Did you try to connect the ps3 controller to the prime using USB and pressing the home botton? Are you able to use the controller with USB? If that works, then I would try sixaxis again and make sure wifi is turned off. If it still disconnects, then I would try connecting another bluetooth device to the prime, to check if that is the problem. Also, if you haven't, try to reboot. If it still doesn't work, then you might have to use the USB cable.
kidio007 said:
Ok. When you connect the ps3 controller to the computer and open Motionjoy and click BluetoothPair, does it say "Have paired to:" then the bluetooth adress next to it? Since it does say "Client Connected" once, then I think you got the setup right though.
Did you try to connect the ps3 controller to the prime using USB and pressing the home botton? Are you able to use the controller with USB? If that works, then I would try sixaxis again and make sure wifi is turned off. If it still disconnects, then I would try connecting another bluetooth device to the prime, to check if that is the problem. Also, if you haven't, try to reboot. If it still doesn't work, then you might have to use the USB cable.
Click to expand...
Click to collapse
Thanks one more time for your Help ,
"Have paired to:" NOTHING ?! ( see at the PIC please )
i connect it with the cable and press "Pair Controller" in the Sixaxis app
Sixaxis says =
Listening for Controllers.....
Master address updated
now when i Press my PS3 Button the Transformer goes to the HomeScreen ?
FIRST W-lan is not on ........
okay now i have install the Driver it connect toMotioninJoy and i have PAIR it to the Adress , but now when i start Sixaxis , it "Listening for Controllers ....."
i press the "P3 " button - the controller lights all 4 Blinks and....
Nothing (Sixaxis) Listening for Controllers .....
and the Controller s lights STOP blink ;(
EDIT 1:
okay i don´t now what i done but now the Sixaxis APP says one more time
Client connected: 1 ( The PS3 controllers lights are Blinking all 4 ! )
some seconds later ....
Client disconected : 1 ( The PS3 Controllers Lights are NOT blink )
THE CONTROLLER PS3 is not ORIGINAL , do you think thats the Problem ?
some one how can help PLS ?
WTF ;( ?
Try this and tell me if it works:
1. Plug controller in with USB port connected.
2. Play around with it to make sure it works for a bit.
3. Push the Playstation button and unplug it from the USB at the same time.
Weird, but it works for me, lol.
If you bought a cheap ps3 controller off ebay it might be the problem, yes. It should be super easy you see, so there might be something wrong with the controller. I'm assuming you don't have the dock, so you are not able to test if it works on the prime using usb?
When you are pairing it, this is how it should look like:
I don't have Sixaxis installed, it's unrooted, and it works fine with bluetooth. I don't know why you're going through the trouble of using Sixaxis at all.
Ov3rbyte said:
Try this and tell me if it works:
1. Plug controller in with USB port connected.
2. Play around with it to make sure it works for a bit.
3. Push the Playstation button and unplug it from the USB at the same time.
Weird, but it works for me, lol.
Click to expand...
Click to collapse
That actually worked lol, what the? xD Halljo, try this! Bluetooth has to be on of course.
Try it without bluetooth on too and tell me if it works please Kidio007.
Ov3rbyte said:
Try it without bluetooth on too and tell me if it works please Kidio007.
Click to expand...
Click to collapse
Tried 7 times, doesn't work for me when I turn off bluetooth. If it works for some with it off, then it's just a glitch probably.
I'm guessing it's a glitch, they fixed it in the update that I got I bet. Now it shows up in the actual bluetooth controllers in bluetooth settings, Woot! It caused reboots and i'm sure it was linked to that.
You conecct it without an app? If i want to pair manual it dont works .i have to do any settings in sixaxis ? Profil or anything?
Gesendet von meinem GT-I9100 mit Tapatalk
ok, first i had to wat da hell?
The knockoff PS3 controllers like the one you got from ebay DO NOT WORK. i learned that the hard way too. Something with how they authenticate, it works for a PS3 but barely, i can connect it to my computer and use it as a controller for that, but for sixaxis controller on my tablet, no way.
Spend the money, buy a real controller. Used game places, pawn shops, i found one with the old packaging at my local TheSource store (TheSource.ca) for like, 15% off. I bought it, it works awesome.
As far as apps go, sixaxis controller is the way to go. Pay the couple of bucks, its worth it. Actively updated, new features seemingly every other week. just do it. you wont be sorry.
As far as getting the controller to connect:
Get this app:
https://market.android.com/details?id=com.dancingpixelstudios.sixaxiscontroller&hl=en
Go to here and download the sixaxis pair tool:
http://www.dancingpixelstudios.com/sixaxiscontroller/tool.html
Other apps can do the same thing, i have used the one in the screenshots previous, however it reverses the mac address. Just use the one i linked, it works with no hassle.
Plug in sixaxis controller to your computer, use the tool to change the mac address.
Start the app on your tablet, it will turn off bluetooth if its on so no need to worry about that. start your sixaxis controller, it should connect pretty much no problem (as long as its genuine, if its a knockoff good luck)
The latest version of the app has a USB pair ability, you can connect your controller via USB and that, for whatever reason, worked on my knockoff controller. weird.
Hope this helps, i know its not the news your looking for. As of yet i cant find anything to get my cheap controller connected, aparently it uses nonstandard meathods for connecting to the PS3 so theres no definate way to make it work 100%.
Thanks for that i buy one and test it later.
I have to change the controller settings game by game ? Also for GTA one and other for shadowgun? Do you can send me your settings if i need it.
Thanks guys for your help
Gesendet von meinem GT-I9100 mit Tapatalk
One more problem is that when i change the input method to sixaxis and change back to hackers keyboard . The keyboard DON'T shows up
I have to restart the prime and sometimes it helps
Gesendet von meinem GT-I9100 mit Tapatalk
the trick of pushing the ps button and unplugging works for me too (without bluetooth on)
i have not turned bluetooth once since i got my prime and this little glitch works for me, and im not rooted
with the orginall PS3 controller works \fine jihaaaaa
but not vibrat. can i change that
Hello!
I recently bought a playstation 3 controller to use with my PC and emulators on my Tablet. I discovered that without root i wasn't able to fully utilize the controller on my tablet.
I got to work and rooted my tablet, bought sixaxis controller and set it up. I am now able to connect with the app and bind keys in the emulator with the app. However when i exit the key-binding menu and begin to play a game the emulator suddenly doesn't recognize any of my button presses made with the app.
I made a touch profile so that i could play but i really want to be able to play without this touch profile.
I've googled with no results for days and i now ask you, what do you think is wrong? And how can i fix it?
Which emulators are you using this with? With some of them you have to set up the bindings in the emulator app.
If you bought a cheap ps3 controller on ebay it will not work. If you buy a legit PS3 controller it will work. Common problem, aftermarket controllers have a slightly different bluetooth profile that its kind of goofy...
If you have a legit controller then it must be other settings!
Lets start from the beginning.
FIRST TIME! If its your first time pairing the controller to the tablet you need to get a USB cable and plug it into the dock.
Start up the app
press the "pair controller" button. This tells the controller which address to connect to. If you dont do this then the controller is looking for a PS3 which your tablet obviously is not.
If it is NOT your first time, or you have used the PC utility to manually change the bluetooth address on the controller
Start up the app
Press Start
Turn on the controller
Remember, you must change the IME (input) from whatever keyboard you have to sixaxis.
Once you see the message in the window say you are paired press the up down left right buttons on the ps3 controller, you SHOULD see things happen on the screen. If not you did something wrong.
If you want to use touch profiles select it from the box
If the above does not work check with the PC utility that your controller is trying to pair to the correct bluetooth address. Note sometimes the sequence is reversed - 12:23:34:45:56:67 can sometimes be 67:56:45:34:32:12. Different applications on the PC work differently.
Make sure you are using the latest LEGIT copy. If you are pirating this software it likely wont work. Check on the market you are updated to the latest version.
If all else fails, contact the developer or check the developers website. I know it works with the prime im running it on mine, works great!
Good luck!
EDIT
Re-reading OP i'd say it sounds like you forgot to change the IME. Maybe check that first
pileot said:
If you bought a cheap ps3 controller on ebay it will not work. If you buy a legit PS3 controller it will work. Common problem, aftermarket controllers have a slightly different bluetooth profile that its kind of goofy...
If you have a legit controller then it must be other settings!
Lets start from the beginning.
FIRST TIME! If its your first time pairing the controller to the tablet you need to get a USB cable and plug it into the dock.
Start up the app
press the "pair controller" button. This tells the controller which address to connect to. If you dont do this then the controller is looking for a PS3 which your tablet obviously is not.
If it is NOT your first time, or you have used the PC utility to manually change the bluetooth address on the controller
Start up the app
Press Start
Turn on the controller
Remember, you must change the IME (input) from whatever keyboard you have to sixaxis.
Once you see the message in the window say you are paired press the up down left right buttons on the ps3 controller, you SHOULD see things happen on the screen. If not you did something wrong.
If you want to use touch profiles select it from the box
If the above does not work check with the PC utility that your controller is trying to pair to the correct bluetooth address. Note sometimes the sequence is reversed - 12:23:34:45:56:67 can sometimes be 67:56:45:34:32:12. Different applications on the PC work differently.
Make sure you are using the latest LEGIT copy. If you are pirating this software it likely wont work. Check on the market you are updated to the latest version.
If all else fails, contact the developer or check the developers website. I know it works with the prime im running it on mine, works great!
Good luck!
EDIT
Re-reading OP i'd say it sounds like you forgot to change the IME. Maybe check that first
Click to expand...
Click to collapse
It's a real controller and i did change the IME.
I am primarily using the N64 emulator. When i map the keys without sexaxis controller installed most of the keys are named <unknow>. When i start sixaxis controller i get "DPAD_START" or something similar when i map the keys. (after enabeling the IME).
So the connecting and mapping goes perfect. But somehow when i exit the settings and start to play it wont detect the keys anymore.
It's quite late now, i will test everything again tomorrow to make sure the problem is still there. But i truly don't know what to do.
I don't know about the emulator you're using, but in NESoid, and SNESoid etc to use sixaxis with it, theres an option in menu>settings>Other settings>"Use Input Method" Enable special input device eg bluetooth gamepad - This needs checked for the controller to work see if this is enabled on yours
NeoMagus said:
I don't know about the emulator you're using, but in NESoid, and SNESoid etc to use sixaxis with it, theres an option in menu>settings>Other settings>"Use Input Method" Enable special input device eg bluetooth gamepad - This needs checked for the controller to work see if this is enabled on yours
Click to expand...
Click to collapse
THANK YOU!
In "other settings" i just had to click that. ****ing awesome m8 Thanks
No prob man I figured thats what it might be frustrated the hell out of me too
Sent from my SCH-I535 using XDA
Ya its kind of annoying because with sixaxis you can have it set for controller input, emulate keyboard, or sort of a hybrid (like the experia play does with its keys), different apps deal with these things differently, its just a matter of finding a method that works best for the app your using.
Glad to hear you got it working!
Thank you
I only rooted to use the controller, I was getting frustrated
Sent from my GT-I9300 using xda premium
Hello Folks,
I was curious to know if anyone has ever tried the Amazon Fire TV game controller with the Shield tablet.
A few posts confirmed that it works fine with the Shield TV, but I found none about the tablet.
Would all the controls work seamlessly ? Voice search too?
Also, the original Shield controller can act as a mouse controller on the Shield with the right stick, would this feature also work with the Fire TV controller ?
Thanks in advance for your help.
Mat.
i ve own the first fire controller, its working fine... better than my ipega
voice i dont know, but mouse works also fine...
If you're talking about the newer model (Wi-Fi Direct) version of the Amazon controller, it can be made to work in a roundabout way. You'll need root and some kind of local terminal program or ADB.
Basically, you can use the stock "accessories" app to try to pair it, and the controller will start working for a while, then the app will say there was a problem communicating and disconnect the pad again, not completing the pairing.
My workaround is to kill the pairing app while the controller is working. You'll need to do it in the background, since even opening the settings app will make the controller disconnect right away.
The process name you're trying to kill will be "com.nvidia.blakepairing". Ignore the quotes.
If you're on an ADB shell you can do it from your PC as soon as you can move the mouse pointer around with the joystick (become root first with su)
Code:
killall com.nvidia.blakepairing
If you're doing it from a terminal emulator, you should have it wait for about 25-35 seconds to give you time to get it running beforehand. Use this:
Code:
su
(sleep 30; killall com.nvidia.blakepairing)&
You'll also need to go to Developer Options and "disable USB audio routing", because otherwise you won't have any sound come out - it seems like it tries to play sound through the 3.5mm jack on the gamepad, but the volume is zero (faint hissing whenever a sound should play). When it does that, neither the speakers or the headphone jack that's on the tablet work at all.
Wouldn't an xbox/ps controller work better? I use an xbox360 controller via usb otg and seems to work really well for most things.
Basically the title. I'm wondering what wireless controller you've guys gotten to work with the Pixel. I don't really won't to get anything expensive because I'm probably won't end up using it much. I wouldn't mind getting one that holds the phone though. I'll mainly be using it for emulators and such.
Also, has anyone successfully gotten the Sony Dualshock 4 controller to work with it? It seems to pair just fine but I can't get any buttons to work with it. It'd be awesome if I could get it work because I already own one.
Thanks in advance friends!
I believe with a PlayStation controller you need a way to map the buttons like Sixaxis Controller (https://play.google.com/store/apps/details?id=com.dancingpixelstudios.sixaxiscontroller).
Sent from my Pixel using Tapatalk
saltorio said:
I believe with a PlayStation controller you need a way to map the buttons like Sixaxis Controller (https://play.google.com/store/apps/details?id=com.dancingpixelstudios.sixaxiscontroller).
Sent from my Pixel using Tapatalk
Click to expand...
Click to collapse
I haven't tried Sixaxis yet with my Pixel, but it worked pretty well for my previous phone. It does require root.
Good news, I got Sony Playstation DualShock DS3/DS4 controllers to work on Google Pixel.
I have a pixel, rooted, with SixAxis Controller app installed.
Wired USB:
dmesg for ds3/4 show the devices connecting via USB, but does not create a hid/dev input device. sad, this worked perfectly on Galaxy S3 on Cyanogenmod
Wireless (Bluetooth):
- Program the master address using SixPairTool on Windows (use phone's Bluetooth MAC address)
- DS4: pair natively as "Wireless Controller" in Android, holding PS+Share. Buttons will not work at this point.
- DS4: Start SixAxis app, and touch start. it 'just works' now, tested in JohnSNES and DosBox, NO LATENCY! Zelda / CommanderKeen
- DS4: Touchpad/Sticks/Buttons works natively in android, sweet. No need to switch to SixAxis IME
- DS3: No native bluetooth pairing. Start SixAxis app, touch start.
- DS3: Hold PS button to start pairing mode, phone will popup with request (0000/1234)
- DS3: Latency seems good, but didn't play that long (JohnSNES).
- DS3+4: XY/AB buttons seem to be swapped, but easy fix in SixAxis settings.
So ROOT is needed for both controllers and wired support is broken.
I got an ouya controller to work. For what it's worth. Of course I wouldn't recommend spending $50 to get one if you do that have it already
I prefer to use the USB a to c doohickey and plug an Xbox controller right in. Works perfectly. Noted for future research though, thanks.
My SteelSeries XL works very well with my Pixel. It's easily the nicest looking controller I've seen that is meant for use with a phone.
At the moment I am using it with DraStic NDS emulator but it likely to work with any game that supports external controllers.