Maybe this thread shouldn't be here, but I am really worried about this, and impressed of my stupidity.
So I was messing with my phone settings, apps and stuff, and for some reason I decided to download "resolution changer" on my phone on which you change your phone's DPI. And for no reason I changed it to 800. Genius me. Basically what I see now is some giant buttons. I can't open the app and change it to default again. Can't use ADB because debugging is not on. When I try to hard reset, the screen won't show up. What can I possibly do now? RIP?
P.S It's LG F70 D315
tl;dr I set my DPI too high, almost can't see anything. What can I do?
Related
Hello everyone,
First of all, I hope this is the right corner and I've collected enough information - I couldn't find anything closely related to my issue.
Now, I've got the first big problem:
Regarding the support of Tablet devices, some apps just don't offer any possibilty to install them. Now, to avoid this problem, I've changed the LCD density to 240dpi.
The Prime is still able to boot normally and everything is working just fine - except for the Launcher: It crashes every 2 seconds and the buttons on the bottom of the screen are cut away just like the one for the app menu in the upper right section so that I've only reached the settings by some tricks so far.
So far, I own my Prime for roughly 1 1/2 months, my Prime is rooted, NOT unlocked and has the most up-to-date firmware installed on it.
Up to now, I tried to factory reset via settings and wipe data with Volume Down + Power button combo.
Apart from that, I think I heard that the dpi settings are to be found in the build.prop file.
Sorry for letting you read this much, but I think this reduces the overall time to spend on it.
I hope that it's possible to get it back working. I miss the Prime experience
Thanks in advance for any help!
Solved!
So, after some hours, I managed to get the Prime back to life by myself:
The build.prop file was the key to success; With some actions in the ADB-Interface and permission changes, it's possible to revert a bad dpi value to default via USB debugging.
If anyone's further interested, I'll try my best to explain how exactly it's working.
The thread title pretty much says it. I'm running CM10.1 nightlies on a Galaxy S2, and it has happened in several different versions. I used MagicLocker for a bit, using its screen security, but recently switched back to WidgetLocker. I thought this may be caused by MagicLocker somehow, so I uninstalled it. Screen Security is still defaulting back to slide. I really don't know of another app that would be doing this.
Hopefully one of you know what's going on.
Thanks.
Have you tried a hard reset or asking in the GS2 section if anyone else is having similar issues with the ROM you are running?
_Epic said:
Have you tried a hard reset or asking in the GS2 section if anyone else is having similar issues with the ROM you are running?
Click to expand...
Click to collapse
If by hard reset you mean restart the phone, yes. Have I wiped and started fresh? No. I'd like to see if there's something I can just toggle or if I'm overlooking something stupid first.
My next stop was the GS2 forum if it didn't get solved here.
edit:
Something more specific to add is that it only defaults to slide after my first unlock with protection on. I can even restart the phone right after setting up the lockscreen protection, but, as soon as I unlock the phone, we're right back to it being set to slide. It's really odd.
Well I figured out what it was.
PhoneLocator Pro was set to "Lock automatically OFF" in the "Screen timeout & Lock" and lock settings menu. I guess I didn't set that properly after changing roms.
Derp. :silly:
I have a device that since being flashed with new rom (kept original boot.img) boots up and everything is seemingly okay....... BUT.... Once the device is locked however, it stays in Negative/Inverted color mode. I was wondering if there is a way to modify a script, xml, or the UI fragments so that this won't happen any longer. The only way to return to normal colors is to reboot the device, and rebooting 12-20 times a day is too much. I will also mention, although it's on 4.1.2, there is no option for inverted display mode under Accessibility settings.
40,000 people online at any given time and not a single person could offer me anything. Not a "damn", "dunno" or even a "sucks for you".... cmon guys, putya brains in it people, let's figure this out, it can't be that hard. I've been using this forum, creeping and posting for 3+4 years, there is nothing we can't do here.
Hi, I am new in XDA, but just want to share some trick on the new Xperia C5 Ultra on change of screen density to look more beautiful without root.
This is useful for those who like to have phablet screen look like table density.
I have done tested on my Xperia C5 Ultra and it work with any flaw.
Please be reminder I am just putting a guide here, I will not responsible for anything happen to your phone, damaged, brick or exploded.
Any how this is done without root and you can restore to original screen density if you don't like it.
Please follow below guide :
Before you start, please ensure you have a working adb tool install on your PC and you have driver install on your PC.
refer here if you don't http://forum.xda-developers.com/showthread.php?t=2588979
This can only be done thru the PC
Original the Xperia C5 Ultra density is 480. This guide will help to change to density 320
screen resolution remain on 1920x1080
Step by Step
1) pls enable the developer mode on your Xperia C5 Ultra
2) check the USB debugging on the developer option
3) plug in the USB and connect your phone to the PC
4) press on the PC " window" key + "X" key and select command prompt (admin)
5) in the command prompt , put in text adb after C:\windows\system32>
6) your phone share pop up message to authorize the usb debugging, select YES.
7) If step 5 & 6 don't come up any long message on the window command prompt, this mean you did not install properly the adb tool in your pc. (refer above to redo)
8) at this step , mean adb is done properly and go back to command prompt in the window
9) enter text "adb shell wm density 320" after the C:\windows\system32>. it look like this C:\windows\system32>adb shell wm density 320 and press enter key on PC
10) Now your phone have change to screen density 320. everything will look smaller now.
11) you need to re-start the Xperia C5 ultra phone and all screen size will completely change to new density 320.
12) you are done. now you can re-arrange your phone icon and have a fresh look !!
How to go back to original screen density
1) repeat the step 1 , 2, 3, 4 & 5.
2) key in C:\windows\system32>adb shell wm density 480 and press enter on pc
3) restart your phone then you will go back to original screen resolution
What works and what not work
work
- all phone function work as normal including screen capture and screen video
- so far I did not encounter any problem, tell me if you know any
- all one hand operation mode is working except the phone key dialer pad as below
not working
- the phone key dialer will not work in one hand mode. It will show error if you have set "one hand mode" on the telephone key dialer
screenshoot as below
Enjoy
Does the camera app scale properly?
No, camera resolution and function no changes. work as normal . Only icon size become smaller
kychan2015 said:
No, camera resolution and function no changes. work as normal . Only icon size become smaller
Click to expand...
Click to collapse
Did you figure out how to extend the battery life. Mine is 13 hours max?
Sorry of topics but you seems like Sony's McGuyver to me.
Whoa.. I cant thank you enough for this tip. Never knew changing of DPI is so easy without root. Everything looks so hi-res now. Seriously, everyone should do it. Sony should had done this be default.
Only glitch I see now is the sony home launcher's page indicator is a little misaligned.
I already tested and tried as your instruction. However I revert back to 480 as the phone feel warm and I afraid it will explode anytime.
I just noticed that the battery life is affected... or is it just me? also the phone is way too hot when I'm using it. hotter than when the DPI is 480
I not sure what wrong. Density and battery should be no connection. You phone is hot because many background processes is running. Try end task all not using app, I think it should be back to normal very fast.
Sent from my E5563 using XDA Free mobile app
kychan2015 said:
...Original the Xperia C5 Ultra density is 480. This guide will help to change to density 320 screen resolution remain on 1920x1080
Click to expand...
Click to collapse
I don't understand... is it supposed that: Higher ppi number gives Sharper screen !!?? But now you lower it to 320?
kychan2015 said:
I not sure what wrong. Density and battery should be no connection. You phone is hot because many background processes is running. Try end task all not using app, I think it should be back to normal very fast.
Sent from my E5563 using XDA Free mobile app
Click to expand...
Click to collapse
I reverted it back to the original and it's not as hot as it was. I think and sure it was affecting... come to think about it, if the icons are smaller, then it can accommodate more things on the screen thus making the gpu work more in terms of animation but I don't know if that's right. But it did affect my battery life when I changed it.
thejamesarnold said:
I reverted it back to the original and it's not as hot as it was. I think and sure it was affecting... come to think about it, if the icons are smaller, then it can accommodate more things on the screen thus making the gpu work more in terms of animation but I don't know if that's right. But it did affect my battery life when I changed it.
Click to expand...
Click to collapse
Technically yes it makes the gpu work a little harder to draw more things on the screen. But there shouldn't be any noticeable impact on the battery nor heat. Countless other devices changes their dpi but never or hardly were this reported. There should be other factors causing the issue for u.
Is there something between 480~320?
Sent from my E5533 using XDA Forums
So if we adjust it to make things smaller to look like a real 1080p, will it effect gaming performance? I mean fps drops?
apps problem...
i have a problem. i mean there is a problem. i set density to 320 and after that i tried to install minecraft pocket edition v13 b5 which i have taken it from original density(restore). it didnt install it. just gave an error.
Edit: i dont know why but game performances are increased.
is it not possible to do it using terminal on the phone itself?
I dont think so. It needs root i guess
alihacker4 said:
Is there something between 480~320?
Sent from my E5533 using XDA Forums
Click to expand...
Click to collapse
Looking for this as well... 480 is to big while 320 is quite small.. Any idea if we can set it somewhere between these values? Thanks in advance ..
May I request someone to post screenshots after increasing the screen density? Thank you very much in advanced.
You can pick any number you want. I use 360. Just change and try it out until you find a setting you like, you won't break anything.
different between 480ppi and 320ppi
320ppi is smaller, 480ppi is bigger
Hi Guys,
Whenever I get a new Android phone, the first app I always load up is Screebl. (Its an app that uses the sensors to keep the screen on when the phone is tilted.)
I've had a look around the windows store but can seem to find anything that functions the same. :crying:
Do you know of an app that can do the same? (or am I being way too optimistic here?)
Thanks in Advance. :highfive:
It's not possible on platform however you can set screen timeout in settings->lock screen to "Never".
sensboston said:
It's not possible on platform however you can set screen timeout in settings->lock screen to "Never".
Click to expand...
Click to collapse
That's what I suspected Boston. :highfive:
Android has its faults, but for me, Windows phone and iOS are not in the same league as only Android allows you to use your device how you want.
Yes, Android has more flexibility (especially rooted) but as for mentioned feature it's irrelevant, you can achieve your goal with the standard settings so it's not a point (or I don't understand completely what do you want).
Could you tell me: why do you want this (if it's not a "top secret")?
Screebl is like having a toggle between lock my screen after 5 seconds activity and never lock my screen. When the phone is flat the screen locks quickly. When titled, the screen never locks.
I find its really useful when I'm using my phone and are then disturbed. I simply rest the phone at an angle, knowing I won't have to mess around with security when I return. This sort of functionality is also very good if you know your hands may get messy.
Ahh, OK, I got your point. I had kinda different issue - I'm developer and need to have always unlocked phone during development and regularly locked during normal usage. I solved this issue by using specific registry setting (not available officially) - WP has two different timeouts for working on battery and on DC (but when phone is connected to USB for debugging purposes, it always on charge).