Hi, I need your help, sorry for my english.
So, today, first thing in the morning that I did (as I do every once in a while) was to install any app updates that I had, and everything went well... until the afternoon, when I woke up from a nap, I went on to use Whatsapp and the app suddenly said that it had stopped (you know that message that appears every once in a while). I went in and opened it again, but this time it gave me the option to restore my conversations and stuff, but I closed the app knowing that it would take a lot of time, and I restarted my cellphone. That probably was a mistake.
It only turned off, it didn't turn back on, which was confusing but I thought 'oh well, I must have not clicked on 'restart''. But as soon as I turned it on, several messages of other apps started to say that they had stopped working. I tried restarting it again, and then it said that it wanted to update my Android software, but it didn't finish because there was a mistake (I didn't touch anything), and then it just stopped working correctly, and it turned itself off, and you know, when you turn it on, the first thing that appears is 'Samsung Galaxy s4 Mini -----', but after a while it didn't appear anymore. And that's where we are.
The first thing I thought was to go for my USB cable to try and format my phone, but I didn't know that the phone had to be on to do that.
Then I tried to do the hard reset thingy that I read on the internet, but that doesn't work either.
I tried charging the battery for a very long time, I took the battery out, put it back in, everything.
The thing is, when I turn it on, it vibrates as it normally does, but it just doesn't work.
Hopefully someone can help me!!!!!!!
Related
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
kameisama said:
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
Click to expand...
Click to collapse
Time to take it in and get a new one.....
Same problem here phone started b not coming out of lock mode. Backlight is on but no display on screen (if i tilt the screen left and right i can see light coming from behind) did about 6 hard resets and still same problem. also power button works whenever it wants to. this phone sucks @ss, i want my mogul back. on a second note my replacement will be here on wednesday.
Touch Pro stock rom purchased back in nov when it came out
yeah, i've had the same problem, i found if i hit my phone on the back or side and then batter pull and hit the soft reset while off, not the power button to turn it back on, it comes back on with color on the screen not just blank black screen with backlight, this works mostly every time, but when it doesn't, i just hold the power button down and do battery pull and hit the power button and it works, its like its got a combo of things you have to do before it works.. weird
Boot Up
I have also had similar problems. I for some reason sometimes have to remove my SD card and boot up without it for some reason. Not all the time, but every once in a blue moon. Not too sure how that affects anything, but you may try that too.
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Mayonesa said:
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Click to expand...
Click to collapse
Have you tried re flashing the ROM?
it wasnt HTC's fault for your phone's not booting...thats what happens when u try to mess with the hardware too much and you dont know what your doing
Would you want to sell???
Reboot Brick HTC process
****DOn't take battery out after hard boot***
1.just watch videohttp://www.youtube.com/watch?v=sk56olMkCtU and do what they do but dont take battery out. LEAVE phone STUCK on BOOT screen. Nothign else will move or work but you want phone just like that.
2. connect usb cable to active sync. (this may not link up but leave usb connected anyhow) Do not delete phone profile.
3.use rom like Download MightyROM6_Herman.exe avail at: http://www.lilrico.com/Mighty/mightyromblog/?p=454
4 although active sync is still attatched but may not be connecting. It will connect thru usb anyway when you run the rom software. http://www.youtube.com/watch?v=fV2I2WAFkg4&NR=1
This worked and kept phone from cutting on and off. and restored ROM. don't know about original htc boot. but your phone will work under this rom for now and you can go from there.
hey thanks plain ole dumb, it works now.
man I thought it was over.
thanks again
Hello all.
I need help and I hope I can receive it asap.
My phone has been turning off on its own quite a bit, but every time I catch it, I would just turn it back on and everything will be back on its way. I can't think of why it would turn off on its own though.
Just now, I was just on gtalk and pressed the power button to turn off the screen. When I tried to press it again to wake it back up, it's off. I turned it back on, it loaded but everything was being force closed. Gmail, Facebook, Calendar etc. So I freaked out and turned it off to restart. Afterwards, when I tried loading it, it got stuck at the loading screen (where there's the yellow triangle). I tried restarting multiple times but it's still stuck there.
I have rooted it and I never had any problems up until now. I have Checkrom V4 (I don't know which kernel, whichever it installs itself). This isn't the first day that I installed this rom either, I've had it for a while now but the problem just got worse today.
I can get into CWM BUT I do not want to restore until I absolutely need to. (this is because I haven't done a backup recently on CWM)
I really hope someone can help as I live off of my phone!
Please and thank you!!
Have a look here: http://forum.xda-developers.com/showthread.php?t=1108499
Chris.
Thanks Chris.
I guess this can be closed as my phone started working all of a sudden.
But I still cannot explain why it would turn off on its own...
go in recovery do a factory wipe and then go stock...
shirbo.g said:
Thanks Chris.
I guess this can be closed as my phone started working all of a sudden.
But I still cannot explain why it would turn off on its own...
Click to expand...
Click to collapse
I wouldn't take it for granted that your phone has just mysteriously "rectified" itself. There is something up. I still suggest following the instructions on the thread I posted above if it does it again.
Chris.
Greetings reader. I'm new to the forum but have been viewing threads every now and then, so after having read plenty of times that people should search before posting. I have searched and didn't find what I was looking for, so that's why you can read this now ;p.
4 days ago when I was trying to browse the web in college I wasn't able to connect to the wifi network or even open the wifi settings, so I reset my phone only to find the problem persisting. As if something locked me out of the wifi settings.
I'm perfectly able to access any of the other settings, so I think it's kinda weird.
Shortly after I realised I couldn't get to the wifi anymore my phone started to reboot itself automatically. Ever since that first reboot it just keeps rebooting at the same pace over and over again until I either power it off or until the battery dies.
The phone also get's unusually hot now. Not like, super hot, but definitely hotter than any other time I can remember.
I also get error messages since the problems started saying: 'Process system is not responding'. I then get the option to either force close it or wait. Neither seem to do much if anything at all other than taking away the error message. Sounds kinda critical if you'd ask me.
But so after all these symptoms started to appear I figured I'd just do a factory reset and be done with it, but every time I go into the factory reset settings, I put in my lock screen pattern and then at the last step (pressing the Erase all data button) it just does nothing.
I can touch the button and it does give the animation that it is being pressed, but it just doesn't do anything.
The phone doesn't freeze though, I can still navigate after pressing the button only to see it reboot again shortly after.
After that I tried to flash the rom, but for some reason my PC refuses to show my phone's internal memory in my pcor any sign of my phone's connection at all.
I haven't tried it on any other pc yet, so it might just be my pc, though I doubt it is since it was perfectly able to recognize it shortly before all this started.
The device hasn't endured any shocks lately or expsure to water or whatever, so I think that's ruled out as well.
I am running the stock rom, 2.3 Gingerbread I believe, and the warranty is already way over date (I think. I'll have to check that).
Any suggestions as on how to determine what could be causing this, or how to fix it? Because I really don't want to buy a new phone xD.
Macowski said:
Greetings reader. I'm new to the forum but have been viewing threads every now and then, so after having read plenty of times that people should search before posting. I have searched and didn't find what I was looking for, so that's why you can read this now ;p.
4 days ago when I was trying to browse the web in college I wasn't able to connect to the wifi network or even open the wifi settings, so I reset my phone only to find the problem persisting. As if something locked me out of the wifi settings.
I'm perfectly able to access any of the other settings, so I think it's kinda weird.
Shortly after I realised I couldn't get to the wifi anymore my phone started to reboot itself automatically. Ever since that first reboot it just keeps rebooting at the same pace over and over again until I either power it off or until the battery dies.
The phone also get's unusually hot now. Not like, super hot, but definitely hotter than any other time I can remember.
I also get error messages since the problems started saying: 'Process system is not responding'. I then get the option to either force close it or wait. Neither seem to do much if anything at all other than taking away the error message. Sounds kinda critical if you'd ask me.
But so after all these symptoms started to appear I figured I'd just do a factory reset and be done with it, but every time I go into the factory reset settings, I put in my lock screen pattern and then at the last step (pressing the Erase all data button) it just does nothing.
I can touch the button and it does give the animation that it is being pressed, but it just doesn't do anything.
The phone doesn't freeze though, I can still navigate after pressing the button only to see it reboot again shortly after.
After that I tried to flash the rom, but for some reason my PC refuses to show my phone's internal memory in my pcor any sign of my phone's connection at all.
I haven't tried it on any other pc yet, so it might just be my pc, though I doubt it is since it was perfectly able to recognize it shortly before all this started.
The device hasn't endured any shocks lately or expsure to water or whatever, so I think that's ruled out as well.
I am running the stock rom, 2.3 Gingerbread I believe, and the warranty is already way over date (I think. I'll have to check that).
Any suggestions as on how to determine what could be causing this, or how to fix it? Because I really don't want to buy a new phone xD.
Click to expand...
Click to collapse
Since you've not modified your Sola in any way.
Give this official method a try.
http://xperiafirmware.com/component/content/article/2-uncategorised/29-sony-update-service
Hey everyone!
I picked up a Gear S about a week ago and until today, I've had no problems. I took the watch off charge this morning and everything was working as fine, used some apps etc, no issues. Then I checked my phone for updates and saw that the Gear Manager app had an update and I installed it. Since then, the screen on my Gear S has been constantly turning on and off. It will turn for about 9 seconds, then switch off and back on 2 seconds later. Turning the screen on manually works but everything is pretty much frozen. I can periodically get as far as the pedometer (because there's an icon for it on the home screen) or to the Apps menu but no further and then the screen will switch itself off.
I'm not sure whether an update to the Gear Manager app should affect the watch itself but I know that when I wiped my phone a few days ago and went to set up the Manager again, it factory reset the watch so I assume there is a direct connection between the software. I've tried disabling both Bluetooth and the remote connection to check if Gear Manager is causing the screen to behave strangely but it's still turning on and off. It's impossible to do a soft reset through the Gear S itself as the screen switches off before I can get to settings and I've tried doing a hard reset but nothing works.
I tried searching on Google for anyone having similar issues and the only thread I can find was posted on Android Central (yesterday I think) with a few people saying that they're having the same problem which makes me thing that the update to Gear Manager is the issue.
Edit: The only screen that doesn't seem to be affected is the PIN lock screen. Screen switches off there as normal and does not come back on.
Edit 2: I've never reset the Gear S before (and I only noticed the factory reset mentioned above after it was finished) but when I attempt to do a hard reset, the watch just reboots as normal without anything happening and all info / data is still there. I presume this really shouldn't be the case?
UPDATE: I'm an idiot / Samsung's instructions on how to do a hard reset are awful.
I decided to Google how to do a hard reset and discovered that when in the Recovery Menu, you need to hold down the Power button to choose an option (Samsung's instructions just tell you to press the Power button until you highlight what you want and I assumed it would automatically choose that after a few seconds because the phone would restart for me). Watch is now factory reset and so far the screen issue appears to be resolved. Another four hours of transferring music it is then.
@BOZG can you post a link to that thread?
I have the Same problem. Sometimes changing a clock face or installing/uninstalling a program seems to make it stop. I have yet to find a good consistent solution. Restarts etc. don't help. Hard reset will fix it but last time I just changed settings on and off and powered the phone on and off and eventually it stopped.
It seems related to when the phone is connected remotely over a cell network. I have the AT&T unlocked with a T-Mobile regular line, not the wearable line since I have a 5 for $100 business plan and the 5th line was not being used. Doubt that makes a difference though.
Followup:
Just now I had the watch off and charged to 100%. Powered up with phone off. Same issue. Watch face loads, the hands change to the current time, then it slides down the screen and looks like a reload because when it comes back up the time isn't correct. The hands reset to the right time. This happens a few times. I power the phone up. Bluetooth connects. I open the gear manager on the phone and it stops.
Will try to repost if that's repeatable. I hope they fix it because it burns quite a bit of battery when it happens. It gets warm so it's running the CPU a lot whatever it is.
allow to power down
BOZG said:
Hey everyone!
I picked up a Gear S about a week ago and until today, I've had no problems. I took the watch off charge this morning and everything was working as fine, used some apps etc, no issues. Then I checked my phone for updates and saw that the Gear Manager app had an update and I installed it. Since then, the screen on my Gear S has been constantly turning on and off. It will turn for about 9 seconds, then switch off and back on 2 seconds later. Turning the screen on manually works but everything is pretty much frozen. I can periodically get as far as the pedometer (because there's an icon for it on the home screen) or to the Apps menu but no further and then the screen will switch itself off.
I'm not sure whether an update to the Gear Manager app should affect the watch itself but I know that when I wiped my phone a few days ago and went to set up the Manager again, it factory reset the watch so I assume there is a direct connection between the software. I've tried disabling both Bluetooth and the remote connection to check if Gear Manager is causing the screen to behave strangely but it's still turning on and off. It's impossible to do a soft reset through the Gear S itself as the screen switches off before I can get to settings and I've tried doing a hard reset but nothing works.
I tried searching on Google for anyone having similar issues and the only thread I can find was posted on Android Central (yesterday I think) with a few people saying that they're having the same problem which makes me thing that the update to Gear Manager is the issue.
Edit: The only screen that doesn't seem to be affected is the PIN lock screen. Screen switches off there as normal and does not come back on.
Edit 2: I've never reset the Gear S before (and I only noticed the factory reset mentioned above after it was finished) but when I attempt to do a hard reset, the watch just reboots as normal without anything happening and all info / data is still there. I presume this really shouldn't be the case?
Click to expand...
Click to collapse
I left mine to use up all the battery,then when it switched off, i left for 2 days and when i switched back on... all fine again.
theroblog.com said:
@BOZG can you post a link to that thread?
I have the Same problem. Sometimes changing a clock face or installing/uninstalling a program seems to make it stop. I have yet to find a good consistent solution. Restarts etc. don't help. Hard reset will fix it but last time I just changed settings on and off and powered the phone on and off and eventually it stopped.
It seems related to when the phone is connected remotely over a cell network. I have the AT&T unlocked with a T-Mobile regular line, not the wearable line since I have a 5 for $100 business plan and the 5th line was not being used. Doubt that makes a difference though.
Followup:
Just now I had the watch off and charged to 100%. Powered up with phone off. Same issue. Watch face loads, the hands change to the current time, then it slides down the screen and looks like a reload because when it comes back up the time isn't correct. The hands reset to the right time. This happens a few times. I power the phone up. Bluetooth connects. I open the gear manager on the phone and it stops.
Will try to repost if that's repeatable. I hope they fix it because it burns quite a bit of battery when it happens. It gets warm so it's running the CPU a lot whatever it is.
Click to expand...
Click to collapse
samsung gear s screen on and off..looping
There you go. Not much to read there though as it's just me and OP. The problem re-emerged for me after a few days again so I was forced to do another hard reset to actually use the watch. I noticed it when I woke up in the morning and noticed that another update had been pushed to the Gear app. That's twice now that this has happened shortly or immediately after the Gear app was updated.
I haven't been able to uninstall an app / change clock face to see if it works as the watch is completely unusable when it happens to me. The Gear app registers that it's connected but it's impossible to change anything from there either and if I turn the watch off and back on again, the Gear app will no longer connect.
petethepete2000 said:
I left mine to use up all the battery,then when it switched off, i left for 2 days and when i switched back on... all fine again.
Click to expand...
Click to collapse
Not sure if I've actually tried letting the battery drain. I'll try that the next time it happens (if it happens).
I had the same problem after the update, a reboot didn't solve the problem. Eventually the battery drained. After a recharge most is fine but I never know which watch face will suddenly appear.
Same issue again. Didn't see the Gear app updating but there was an update released the day before. Going to switch off auto-updates and see if it definitely the problem. Just seems too coincidental that this problem starts right after an update is released for the Gear App.
petethepete2000 said:
I left mine to use up all the battery,then when it switched off, i left for 2 days and when i switched back on... all fine again.
Click to expand...
Click to collapse
Started doing it again yesterday so let the battery die and charged it fully and it didn't help. Left it on the box overnight and brought it to a Samsung Service Centre this morning and of course it was working again when I took it out of the box! Left it with them anyway so I'll see what happens.
I've had my Gear S a few weeks and it has also started doing this, I will give some of the suggestions here a go.....
EDIT: So opening the Gear Manager App once Bluetooth was connected brought my Gear S back to life. Phew!
It's only entered this state after I turned it off at night and then turned it back on in the morning - so it had been off roughly 8 hours. Upon turning it on the screen would cycle from the right time and notification numbers and the wrong time and wrong notification numbers too off again.
@ BOZG - Just wondering if you got your S back yet and if so, were they able to tell you what was causing this on/off problem. Mine just started doing it yesterday.
Also, how did you find the "Samsung Service Centre"?
holding the screen seems to cause it...
Had to send mine to Samsung for a new charging cradle and they updated the software to latest, when i got it back it seemed fine. Then i was messing about with it and was holding the screen to my chest for a while and that seemed to cause it to happen. It seems to be the screens gets too much activation and it flips out. I think this is what started the problem last time it happened.1
Switching to power saving mode seems to fix it for me... have to wait until it gets low on battery and when the low bat warning comes on, switch then... leave for a bit then switch back to normal.
I called Samsung Thursday and they sent me a UPS label and told me to send the watch, charging cradle and AC charging cord back in for service. She told me it takes about 7-14 days. We shall see.
Happy to have found this. </rant>I'm starting to get enough of this Samsung stuff. I had the note 2 and now I have the note 4 and gear S. That is mote then 1000 euro of equipment. And today when I tried the restore to fix this, both the phone and the watch rebooted. Crazy that they can not build good software and hardware for this price. </rant>
To me it seems that is freezes somehow when this happens. It kept jumping back to 22:10 time and changed to the watch-face and settings keep rolling back. It seems to happen to me, when the watch is off for some hours. The samsung way... no update to fix this.
solved for me
hi first of all sorry if i do any mistakes because English is not my language
i had similar problem and i found the solution at least in my case . THE PROBLEM IS NOT WITH THE GEAR S
all was ok using 4.4.2 kitkat on my note 3 before few months i upgrade with lollipop 5 official from sammobile via odin
from that moment the problems begin with the reconnection of the gear with the note
long time to connect and no auto reconnection only manual by turning off-on the bluetooth
i was boring to do format to the note3 so i left it as it
few weeks ago probably of gear manager update the gear start freezing and the screen turning on and off
first i do a factory reset and the gear was ok for a while but after it do the same but the next time the screen was not ok the colors was different so i send to service in Athens
the service in Athens is very fast and very helpful , is one of the reasons that i will difficult go with other manufacture , so they return me the gear saying that they change the motherboard and now there is new imei
but the gear that they send me was brand new except the band and the box. BUT after some time the same problem ..... i call them and they tell me to send it back so i send it and i receive it again but this time the say that the watch is ok
GUESS NOW .... i turn it on and after a while of the connection with my note AGAIN the same problem the screen on and off and freezing plus was overheat underneath
i was ready to call them and to say few words but they was closed ..... then i search the net and i found this post and i thing probably is not the gear the problem ,no hardware problem, i decide to do a test
i download the last working rom to my phone 4.4.2 and magically the problem disappears .... but now there is a software update on my phone lollipop 5 so i do the update and i was ready if the phone cause again the same problem
to return and stay with 4.4.2 But now all is ok the problem solved .... now is more of 24h and all are ok
i hope this will work for you also
Same problem
I have the same issue exactly - Note 4 with latest lollipop upgrade - it is very frustrating......I don't particularly want to have to move back an OS just to use the watch !
JALUK said:
I have the same issue exactly - Note 4 with latest lollipop upgrade - it is very frustrating......I don't particularly want to have to move back an OS just to use the watch !
Click to expand...
Click to collapse
Ok but doing a downgrade and all working ok you can do update again.... i am not with 4.4.2 i went to the latest 5.0 for me now and all are ok.
Maybe something was wrong with the update procedure.
UPDATE
the touch function of the 2nd gear stop working so i send it back and they send me new device
for a few days all was ok . But today when i restart the phone while the gear was disconnected the problem with screen turning on repeatedly appears again .
for sure is not problem of the gear , this is the 3rd device in my hands, something is wrong with the gear manager software .
i have also reconnection problems .... if the phone is far away and they lost Bluetooth connection the most of the times i must reconnect manually , the gear say disconnected but the note think is still connected
I wonder has anyone tried to reset the watch as a stand alone device and see if the problem happens? I know you might lose a lot of the blue tooth functionality but I think I will test it and see if the problem still happens.
I got my Xiaomi Redmi 3 in the middle of october 2016. Since then i've been using it every day. It had minor problems, like music app sometimes turns off by itself, data connection didn't want to turn on only with phone restart, but nothing major, that couldn't be temporarily fixed. But a few days ago i just wanted to browse instagram, i opened the app, and it just turned off instantly. So i tried reinstalling it. Nothing changed. I then tried to install an older version of the app. Still no change. So i decided to leave it be. I was talking to my father, that it should be reflashed because there is something wrong with it. He just pressed regular restart on it, but after that the phone died. I mean it died. It does not respond to charging, connecting to usb, pressing any existing combination of the three buttons. The screen and the status LED does not light up even for a bit. I tried to reflash it anyway with methods specifically for this situation, but it doesn't work either. In the flash tool installation of the rom just does not start. I think it's because my pc does not accept the driver, even from the official website, it just says in the device manager, that it's Android and it has that little yellow triangle. So it is visible for my PC through USB but no driver is accepted. What should i do?
Replace to new phone or carry your phone to customer service, but hey it's xiaomi
This wont help with your phone, but just wanted to leave a note for others. I was having the same issue with the Instagram app. I reinstalled the app, wiped caches, upgraded my ROM, downgraded the app, every tried a entriely differnet ROM. Nothign worked. Instagram would just crash a few seconds after opening. Really weird.
Heres how i fixed it: go to Airplane mode, open the app, logout, turn off airplane mode, log back in.
rarely fc it's okay. but when got often it's a major issue. might be emmc needs to be fixed