Related
OK so i wanted to troll all of you
Flash this "surprise kernel" with flashtool and see the magic
ONLY FOR UNLOCKED BOOTLOADERS
http://icxperia.com/championswimmer/x10-semc-es209ra/surprise.ftf
NOTE :
1. This was something sort of proof-of-concept. I tried doing this in my spare time.
2. I do NOT have enough time/knowledge to debug and fix this. This is not fully working.
3. This is just for fun. Once fun is over (in a day or 2) i request Mods to transfer this thread to apps/themes section.
4. As a long time contributor of the X10 forums, you can be assured that this will not brick your device, though if you are uncertain, please do NOT flash it. In any way i am not responsible for any calamity.
5. Please flash back to the kernel you were previously using after having fun with this.
6. If any dev wants to continue this work and finish it please PM me, I'll tell you how to set up the repo and compile this.
championswimmer said:
OK so i wanted to troll all of you
Flash this "surprise kernel" with flashtool and see the magic
ONLY FOR UNLOCKED BOOTLOADERS
http://icxperia.com/championswimmer/x10-semc-es209ra/surprise.ftf
NOTE :
1. This was something sort of proof-of-concept. I tried doing this in my spare time.
2. I do NOT have enough time/knowledge to debug and fix this. This is not fully working.
3. This is just for fun. Once fun is over (in a day or 2) i request Mods to transfer this thread to apps/themes section.
4. As a long time contributor of the X10 forums, you can be assured that this will not brick your device, though if you are uncertain, please do NOT flash it. In any way i am not responsible for any calamity.
5. Please flash back to the kernel you were previously using after having fun with this.
6. If any dev wants to continue this work and finish it please PM me, I'll tell you how to set up the repo and compile this.
Click to expand...
Click to collapse
will try that mate
Is it GB or ICS kernel?
THanks
porksome said:
Is it GB or ICS kernel?
THanks
Click to expand...
Click to collapse
who cares!!
this is not for everyday use... lol
just try it out and see
You calling me a twerp? Are ya?
---------- Post added at 02:21 PM ---------- Previous post was at 02:19 PM ----------
Touch isn't working.
TAL333 said:
You calling me a twerp? Are ya?
---------- Post added at 02:21 PM ---------- Previous post was at 02:19 PM ----------
Touch isn't working.
Click to expand...
Click to collapse
i know that...
will try fixing it later when i have time...
anyways it is not possible to integrate into main kernel right now so i am not thinking much about it... as i said... just for the fun of it
maybe it'll work better with the stock zImage... i have no idea...lol
Hey !!! that's really nice !!!
buggy and not fully working but this can be a good start for kernel devs ....
congratulations !!!!
Looks like a nice concept for us
this is a very good base that needs to be developed...
Nice done !! :good:
championswimmer said:
i know that...
will try fixing it later when i have time...
anyways it is not possible to integrate into main kernel right now so i am not thinking much about it... as i said... just for the fun of it
maybe it'll work better with the stock zImage... i have no idea...lol
Click to expand...
Click to collapse
Honestly, it looks very promising. I personally don't like the current touch recovery for X10. It takes too long to find a file to flash only viewing one file at a time while scrolling. I always select good old original CWM because I can scroll to a file much faster. Also, I heard Championswimmer was about to release a new updated kernel. Any truth to that rumor?
TAL333 said:
Honestly, it looks very promising. I personally don't like the current touch recovery for X10. It takes too long to find a file to flash only viewing one file at a time while scrolling. I always select good old original CWM because I can scroll to a file much faster. Also, I heard Championswimmer was about to release a new updated kernel. Any truth to that rumor?
Click to expand...
Click to collapse
kernel comes with next aokp
will try to make more camera progress if possible
and also try to make jb if possible
championswimmer said:
kernel comes with next aokp
will try to make more camera progress if possible
and also try to make jb if possible
Click to expand...
Click to collapse
What is this kernel? Cant you tell me lol
Dont have time to flash this at the moment.pleaseeeeeee
HINT : it does not boot into /system
and it neither needs to... it's for having fun with a step before booting OS
championswimmer said:
HINT : it does not boot into /system
and it neither needs to... it's for having fun with a step before booting OS
Click to expand...
Click to collapse
okayyyy
will try it later
Man some1 should take a video of this kernel.... Dnt hv a usb cable to flash it
Sent from my X10i using xda app-developers app
let me bump this up for some more fun
#nothingtodo
i don't have an X10 but you have provided cutting-edge work before. so what does this kernel do? what does it boot into or where does it boot into?
does it mean you still working on your aokp rom and X10 ?
chriscx said:
does it mean you still working on your aokp rom and X10 ?
Click to expand...
Click to collapse
All I can say is I still have my x10....
Sent from my Xperia S using xda app-developers app
championswimmer said:
All I can say is I still have my x10....
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Totally diplomatic lol
Anyways still haven't tried it.
Will try tonight
Sent from my X10
So the first person who makes completely working miui or cm10.1 or both will get 100-150 dollars
Sent from my Samsung Galaxy SIV using xda app-developers app
gogozx said:
So the first person who makes completely working miui or cm10.1 or both will get 100-150 dollars
Sent from my Samsung Galaxy SIV using xda app-developers app
Click to expand...
Click to collapse
does this offer still stand?
If so, I will give it a go.
OpenMinded said:
does this offer still stand?
If so, I will give it a go.
Click to expand...
Click to collapse
Yes, it still stands, but i found out that CM10.1 is currently impossible to make, so you can try with MIUI V5.
gogozx said:
Yes, it still stands, but i found out that CM10.1 is currently impossible to make, so you can try with MIUI V5.
Click to expand...
Click to collapse
so how did you make the nexus rom for it?
The issue is that I do not own the phone, but I am looking at porting CM to MTK6589.
MIUI porting is a bit different, it would not involve kernel compiling per se I believe (CM either, but I would like to).
To give it a go, I would need info from here:
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
So your ROM version, partition info etc.
When I manage to port to a device I own, I can give it a go.
OpenMinded said:
so how did you make the nexus rom for it?
The issue is that I do not own the phone, but I am looking at porting CM to MTK6589.
MIUI porting is a bit different, it would not involve kernel compiling per se I believe (CM either, but I would like to).
To give it a go, I would need info from here:
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
So your ROM version, partition info etc.
When I manage to port to a device I own, I can give it a go.
Click to expand...
Click to collapse
It's not really Nexus ROM, it's just stock ROM modified to look like stock Android.
I have Android 4.2.1
I will PM you the partition info.
gogozx said:
It's not really Nexus ROM, it's just stock ROM modified to look like stock Android.
I have Android 4.2.1
I will PM you the partition info.
Click to expand...
Click to collapse
Just started with practicing on my Nexus 7 . I ordered the same model as well, N9389.
I also have a N9599, let's see how far I get .
OpenMinded said:
Just started with practicing on my Nexus 7 . I ordered the same model as well, N9389.
I also have a N9599, let's see how far I get .
Click to expand...
Click to collapse
Wow, it seems that you have alot of money to order it just because you want to develop ROM for that phone.
Good luck man, if you need any help message me
gogozx said:
Wow, it seems that you have alot of money to order it just because you want to develop ROM for that phone.
Good luck man, if you need any help message me
Click to expand...
Click to collapse
Well, not really, but I like to spend money on those things.
When the ROM works I'll sell it .
Well dump info and the stuff on the CM porting page is still usefull.
cheers
OpenMinded said:
Well, not really, but I like to spend money on those things.
When the ROM works I'll sell it .
Well dump info and the stuff on the CM porting page is still usefull.
cheers
Click to expand...
Click to collapse
I will be testing those ROMs that you make for N9389, is it OK?
gogozx said:
I will be testing those ROMs that you make for N9389, is it OK?
Click to expand...
Click to collapse
If I manage to make something working, sure !
OpenMinded said:
If I manage to make something working, sure !
Click to expand...
Click to collapse
i compiled my first recovery based on cm 10.1 for Thl W8.
I have no easy way to push the image to the phone to test.
If it works, I can start to create a recovery for this phone based on sources.
I would need that info I requested.
Are you able to post the build.prop file and the partition dump?
Look at the page with instructions I posted earlier.
Meantime I look for an easy way to flash that recovery, somehow sp flashtool does not read the scatter file created by mtkdroidtools .
cheers
managed to flash it, but it does not work , just a black screen .
Harder than it looks.
Can't promise anything, but I'll post if I get further.
Compiling on an old C2D now, so it takes time .
OpenMinded said:
managed to flash it, but it does not work , just a black screen .
Harder than it looks.
Can't promise anything, but I'll post if I get further.
Compiling on an old C2D now, so it takes time .
Click to expand...
Click to collapse
Even if you failed, thank you for trying and i hope you will make it
gogozx said:
Even if you failed, thank you for trying and i hope you will make it
Click to expand...
Click to collapse
you are welcome .
I do still need the information I mentioned once I get it working.
Especially the partition info is important.
You may always hit the thanks button when you are happy .
I am currently working on CWM 6 to get working.
I'll post when I have progress (or when I quit ).
You can always give it a go yourself:
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
cheers!
OpenMinded said:
If I manage to make something working, sure !
Click to expand...
Click to collapse
So, like I requested before, please :
- post your build.prop file
- post identification stuff of the device, like screen resolution, memory and recovery.fstab (or the recovery image)
- in general take a look at the link I posted before and read it, so you know what info is needed :
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
The reason I ask is because there are at leat 2 different versions, 1 had 960x480 screen and 1/4gb ram/rom, the other 1280x720 and 2/8.
They obviously at least have different partitions and displays and perhaps even other different hardware.
You can also post a full working ROM on dropbox or something.
thanks
P.S. for the needed tools, see here:
http://forum.xda-developers.com/showpost.php?p=44096751&postcount=371
This is a CWM 6.0.3.3 which works on my device.
Use SP Flash Tools 3.13 something to flash.
My scatter file is attached, please compare it with yours.
Needless to say perhaps, but still: this is on your own risk.
You may damage your device if you do not know what you are doing.
Bricking it is not my fault!
So think before you act.
If you try: please give feedback if it works.
If does it is the same device: N9389 5.3", 960x480 (qHD) , 1 gb ram, 4 gb rom.
Device identifier: v89_gq2002s
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P2, 2013/03/26 12:42
cheers!
OpenMinded said:
This is a CWM 6.0.3.3 which works on my device.
Use SP Flash Tools 3.13 something to flash.
My scatter file is attached, please compare it with yours.
Needless to say perhaps, but still: this is on your own risk.
You may damage your device if you do not know what you are doing.
Bricking it is not my fault!
So think before you act.
If you try: please give feedback if it works.
If does it is the same device: N9389 5.3", 960x480 (qHD) , 1 gb ram, 4 gb rom.
Device identifier: v89_gq2002s
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P2, 2013/03/26 12:42
cheers!
Click to expand...
Click to collapse
OK, thank you man but i already have CWM :/
Anyways yes that is my phone
And here is the stock ROM
http://www.needrom.com/mobile/star-n9389/
gogozx said:
OK, thank you man but i already have CWM :/
Anyways yes that is my phone
And here is the stock ROM
http://www.needrom.com/mobile/star-n9389/
Click to expand...
Click to collapse
You have CWM 6 already? If you are sure, I will continue.
OpenMinded said:
You have CWM 6 already? If you are sure, I will continue.
Click to expand...
Click to collapse
I'm sure You have no idea how happy i am now, you honestly make me happy because you try so hard for person that you don't even know DD
gogozx said:
I'm sure You have no idea how happy i am now, you honestly make me happy because you try so hard for person that you don't even know DD
Click to expand...
Click to collapse
Hi,
Well I am partly motivated by your offer, but I enjoy Android and Linux hacking.
Let's hope those attempts will lead to something.
How about LewaOS? There are good porting guides for that.
I will try to look for MIUI or CM in the weekend.
Initial CM would miss dual sim support.
Maybe MIUI is easier, because some work has been done.
Well, I'll see.
Don't overestimate the complexity, if you have CM 6 and made it yourself, porting a rom is doable I suppose ?
cheers
Hi!
Please, I wish to know if someone have some tip to get working the screen wakeup with the volume key for the Huawei Ascend G700!!
I recently aquired a this cellphone (Mediatek Quadcore 1,3 ghz 5" IPS screen), in my opinion a nice device for the bucks.
I come from a Huawei Ascend Y300, with the volume key wakeup mod in it (i must to thank the great help i received from the user VavanL in the thread http://forum.xda-developers.com/showthread.php?p=44264908#post44264908 about the volume beep in the screen unlock.
If someone can help me in this i will thank him a lot, cause is very annoying for me always unlocking the device with this little and weak power on button...I remember the key of the thing was this 3 system files
system/usr/keylayout/Generic.kl
system/usr/keylayout/querty.kl
system/framework/android.policy.jar
Thanks everyone!
Ok, first of all - what OS version you have(4.2 perhaps)
And second - where file links, man... Maybe I know how to help you
VavanL said:
Ok, first of all - what OS version you have(4.2 perhaps)
And second - where file links, man... Maybe I know how to help you
Click to expand...
Click to collapse
Hi VavanL!!!!!!
Long time i see you!
Sadly the G700 (great device by the way) is stuck in android 4.2.1 (waiting to mediatek free the code for the soc).
I see in the mod for the Y300 some devs add the line "WAKE" on the volume key.....but, im stuck with the android_policies.jar, i dont know how to modify them.
s
I add my untouched files!! Friend, i hope u can do your magic with it. (i have to add generik and qwerty as a rar cause dont let me to upload normally, decompress please).
Hi, pal!
Sry, but You have odexed rom - need to deodex it for future editing
VavanL said:
Hi, pal!
Sry, but You have odexed rom - need to deodex it for future editing
Click to expand...
Click to collapse
Oopps...i dont know what i do wrong... i just copy the files from the Cellphone to my pc and then attack it to thread
Tell me what i have to do...
Im so anxious waiting your responses i dont dare to move far away of the notebook :crying:.
There and there also guides how-to deodex stock rom, but it's a bit risky, you do all changes to your own responsibility!!!
VavanL said:
There and there also guides how-to deodex stock rom, but it's a bit risky, you do all changes to your own responsibility!!!
Click to expand...
Click to collapse
But there is no way i can send you the files without do this?
The android 4.2.1 from my cellphone is untouched and i just copy the files, i remember to send u the Y300 files in the same way..
I dont have this kind of knowledge to do what the guide says...
Anyway pal, many thanks for all your responses, u are great!
I guess my G700 stays as it is.
...it's the way to edit android.policy file...Also you may flash already-deodexed custom rom for your phone
VavanL said:
...it's the way to edit android.policy file...Also you may flash already-deodexed custom rom for your phone
Click to expand...
Click to collapse
So the best way would be to put a "custom rom" and so this way i can send to you the correct files dont you?
Uffff..... i read is dangerous the deodexing, but im unable to find custom rom for the G700.....
Hey pal, u are the one, then i try to locate first some custom recovery and a proper custom rom.
On my way!
go on, man
VavanL said:
go on, man
Click to expand...
Click to collapse
What do you think about this?
http://forum.xda-developers.com/showthread.php?t=1373131
Edit: Is ICS..... keep searching
if I'm right ,it's only for ICS roms, while you have JB
VavanL said:
if I'm right ,it's only for ICS roms, while you have JB
Click to expand...
Click to collapse
Yes duda, u are right.
By the way, im absolutely unable to find any custom recovery or roms.
Seems that phone is a ghost....
I know one place,but it's russian forum.. If U have good translator - here is a thread
VavanL said:
I know one place,but it's russian forum.. If U have good translator - here is a thread
Click to expand...
Click to collapse
yes im tryng to understand and translate!
thanks again.
Well....i just started to do step by step of the guide, but it turns incomprensible in some parts (due lack the bad translation done by google)...
Can i ask u a favor? Could you do some little guide when do you have some free time?
I gladly wait for it all the time you need..
I see they solved the "bootlop error" who many people has when they put the custom recovery.
Would be great if you can help us (there is so much people in the Htcmania.com forum waiting for a clear guide to install some Custom Firmware in there) and nobody do it until now as we can find.
U are the man pal... (we are spanish).
ok, try it later
---------- Post added at 10:38 PM ---------- Previous post was at 10:28 PM ----------
and what exactly model of G700 you have
G700-T00
G700-U00
G700-U10
G700-U20
???Turns out, it's very important
VavanL said:
ok, try it later
---------- Post added at 10:38 PM ---------- Previous post was at 10:28 PM ----------
and what exactly model of G700 you have
G700-T00
G700-U00
G700-U10
G700-U20
???Turns out, it's very important
Click to expand...
Click to collapse
G700 -U10,...
Buff...all around this device is so criptic..
Mani thanks for bring your knowledge here dude.
gothico30 said:
G700 -U10,...
Buff...all around this device is so criptic..
Mani thanks for bring your knowledge here dude.
Click to expand...
Click to collapse
Hi, diving in the web i find this..
http://customizegadget.blogspot.com.es/2014/05/huawei-g700-u10-how-to-install-cwm.html
What do you think?
Is so weird, this blog is the only translated method i was able to find....but im a little doubtfull.
It's very similar to that one i found in russian forum.
But they insist, that you must flash stock rom from official site first.
WARNING! For owners of the U10 and U20!!! Before you install a custom recovery compulsory flash stock firmware through "three keys"(Push both volume up (+) and volume down (+) plus Power Switch)!
Otherwise you will get bootloop!!!
Click to expand...
Click to collapse
And then flash recovery
When will our Micromax A310 developers start
Work with Android n
It will take some time, no estimate time
Sent from my Nitro using XDA-Developers mobile app
9888 said:
When will our Micromax A310 developers start
Work with Android n
Click to expand...
Click to collapse
rahult2838 said:
It will take some time, no estimate time
Click to expand...
Click to collapse
Try this module which gives Android N like features on LP & MM
Link :- http://forum.xda-developers.com/xposed/modules/xposed-android-n-ify-features-t3345091
Hi Guys Glad to tell You that I am going to post the CM14 android N (7.0.0) for or device today soory i can be late ive got really low uploading speeds low like 25kbps and the filesize is around 414 Mb uploading on GD and DEVHOST will psot thread till evening today. Also working on expermenttalX kernal for our device..... I dont have my A310 gone for repairs so I need testers willing to test the rom .will soon post uploaded file on devhost for testers.
Jaisal Srivastava said:
Hi Guys Glad to tell You that I am going to post the CM14 android N (7.0.0) for or device today soory i can be late ive got really low uploading speeds low like 25kbps and the filesize is around 414 Mb uploading on GD and DEVHOST will psot thread till evening today. Also working on expermenttalX kernal for our device..... I dont have my A310 gone for repairs so I need testers willing to test the rom .will soon post uploaded file on devhost for testers.
Click to expand...
Click to collapse
The thing you are saying is totally Impossible ,,
Reasons :-
> No kernel Source Released by Mediatek
> No Proprietry Patches or Blobs are yet compatible yet
> wihtout source or patches you can't even boot cm14 so don't lie.
:laugh::laugh:
Its Booted for Generic MT6592 with stock kernel but still there are too many bugs and issues left to be Fixed.
[email protected] said:
The thing you are saying is totally Impossible ,,
Reasons :-
> No kernel Source Released by Mediatek
> No Proprietry Patches or Blobs are yet compatible yet
> wihtout source or patches you can't even boot cm14 so don't lie.
:laugh::laugh:
Its Booted for Generic MT6592 with stock kernel but still there are too many bugs and issues left to be Fixed.
Click to expand...
Click to collapse
@[email protected]
sir i know that that is why i have ued source kernel in this build its highly experimental and contains too many bugs like random reeboot and no wifi bluetooth camera but its just to have an android N experience on our devices i have creating the thread and the uploading will complete anytime soon i have tested it so and it works only for a couple of hours and due to some kernal issue the deepsleep fuction does not work and it goes into permanet bootloop. Just for Fun I have put my hardwork in this and the rom doesnt even work with a311 users bootloop at beggining.
and about the patches i had the @strix help me to get the rom at least stable.. for running..
Jaisal Srivastava said:
@[email protected]
sir i know that that is why i have ued source kernel in this build its highly experimental and contains too many bugs like random reeboot and no wifi bluetooth camera but its just to have an android N experience on our devices i have creating the thread and the uploading will complete anytime soon i have tested it so and it works only for a couple of hours and due to some kernal issue the deepsleep fuction does not work and it goes into permanet bootloop. Just for Fun I have put my hardwork in this and the rom doesnt even work with a311 users bootloop at beggining.
and about the patches i had the @strix help me to get the rom at least stable.. for running..
Click to expand...
Click to collapse
Lets see. Upload and Post. :good:
[email protected] said:
Lets see. Upload and Post. :good:
Click to expand...
Click to collapse
Thp sir I have uploading since 2 days of this ROM on Google drive and till now it has been saying 3hr and 21 min left please suggest any other good site for uploading. The file size is around 430 mb
---------- Post added at 07:15 AM ---------- Previous post was at 07:13 AM ----------
[email protected] said:
Lets see. Upload and Post. :good:
Click to expand...
Click to collapse
And I tried to use kernels form coolui and eui and they don't seem to work why even when they are android 4.4.4 with no mods...
Jaisal Srivastava said:
Thp sir I have uploading since 2 days of this ROM on Google drive and till now it has been saying 3hr and 21 min left please suggest any other good site for uploading. The file size is around 430 mb
---------- Post added at 07:15 AM ---------- Previous post was at 07:13 AM ----------
And I tried to use kernels form coolui and eui and they don't seem to work why even when they are android 4.4.4 with no mods...
Click to expand...
Click to collapse
Kernels are device specific and directly connected to hardware made by OEM. You can't use another device's kernel. You might end up damaging your device hardware.
For upload you can use google drive app on mobile. You can also pause your upload on there.
[email protected] said:
Kernels are device specific and directly connected to hardware made by OEM. You can't use another device's kernel. You might end up damaging your device hardware.
For upload you can use google drive app on mobile. You can also pause your upload on there.
Click to expand...
Click to collapse
Thanks for you valuable info I'll copy the file on my app .
[email protected] said:
Kernels are device specific and directly connected to hardware made by OEM. You can't use another device's kernel. You might end up damaging your device hardware.
For upload you can use google drive app on mobile. You can also pause your upload on there.
Click to expand...
Click to collapse
Jaisal Srivastava said:
Thanks for you valuable info I'll copy the file on my app .
Click to expand...
Click to collapse
Thp sir, it looks like I have coded the updater spript wrongly do you mind taking a look? ( I used notepad ++ to edit. ) its giving me status 6 and aborting looks like I had code gone wrong. its in edify. Please correct it for me... The link is in below post
Test it if you can and please tell me it works.
Can't seem to figure out the problem
Subscribed...
Lets see, how it's going
[email protected] said:
Lets see. Upload and Post. :good:
Click to expand...
Click to collapse
Thp sir its uplaoded please find file below
https://drive.google.com/file/d/0B3IAUo41Au5IcGlCS1h5bzZZalE/view?usp=drivesdk
And please check first post on page two to know as to why I have posted this file here for you.
This build will give status 6 if you flash it let [email protected] sir find out the problem and then i'll post the file on the thread
Jaisal Srivastava said:
Thp sir its uplaoded please find file below
https://drive.google.com/file/d/0B3IAUo41Au5IcGlCS1h5bzZZalE/view?usp=drivesdk
And please check first post on page two to know as to why I have posted this file here for you.
This build will give status 6 if you flash it let [email protected] sir find out the problem and then i'll post the file on the thread
Click to expand...
Click to collapse
Do you even know what is CM14 ?
The rom you uploaded is not cm14 its cm12.1. (LP - 5.1.1)
[email protected] said:
Do you even know what is CM14 ?
The rom you uploaded is not cm14 its cm12.1. (LP - 5.1.1)
Click to expand...
Click to collapse
thp sir im sorry for the loss of your data and time but I had uploaded the wrong zip file giving you link now.
i know that your trust for me is dead.
jaisri said:
thp sir im sorry for the loss of your data and time but I had uploaded the wrong zip file giving you link now.
i know that your trust for me is dead.
Click to expand...
Click to collapse
Yes , I can't trust because you gave me zip file which name was CM14 and still you say its wrong zip. If you really booted N then post SS of it on Nitro. Otherwise No one will beleive you.
ll
[email protected] said:
Yes , I can't trust because you gave me zip file which name was CM14 and still you say its wrong zip. If you really booted N then post SS of it on Nitro. Otherwise No one will beleive you.
Click to expand...
Click to collapse
OK sir will post scr shots and probably the ROM zip too but maybe not because it seems to take a lot of time and I seem to be inexperienced for porting. Will not port any ROM again. Sorry again.
The thing is I had two zips in gd one was which I was modifying for theming to android 7 as a huge fan and other was ported.
It will be a few months since the j6 came out but we still have no news about customs roms on this phone. Would anyone have any information about this, and is it possible to flash j7 (2016) roms on j6 since they have the same processors? Thank you in advance for answers .
(Sorry if my english may not be clear , I'm french)
No, it is not possible. The J6 uses different display drivers.
I am currently working on porting a ROM from the J5 Pro with great features, but I am still trying to eliminate some bugs.
I may share a BETA soon, but I don't know yet.
So far I don't think any other recognized developer will pick this device up. It offers nothing new to previous phones, some would say it is just a waste of a phone lol
(I got it for free)
So yeah.
ShaDisNX255 said:
No, it is not possible. The J6 uses different display drivers.
I am currently working on porting a ROM from the J5 Pro with great features, but I am still trying to eliminate some bugs.
I may share a BETA soon, but I don't know yet.
So far I don't think any other recognized developer will pick this device up. It offers nothing new to previous phones, some would say it is just a waste of a phone lol
(I got it for free)
So yeah.
Click to expand...
Click to collapse
Ok man thank you for the reply i just saw it and I also wish you a good luck for the Rom you're porting and is it a AOSP or TouchWiz ? And it hurts me that people do not care more about this phone :crying:
Ryan Edwige said:
Ok man thank you for the reply i just saw it and I also wish you a good luck for the Rom you're porting and is it a AOSP or TouchWiz ? And it hurts me that people do not care more about this phone :crying:
Click to expand...
Click to collapse
It's Touchwiz. I don't like nor use AOSP
That's great man . I don't know how to create a rom , but if u need some suggestion, help, my brain's full of idea , things (extra-feature , extra-app just like viper4android ) that people would see on any touchwiz rom . That's my telegram @sokazuya
ShaDisNX255 said:
It's Touchwiz. I don't like nor use AOSP
Click to expand...
Click to collapse
Ryan Edwige said:
That's great man . I don't know how to create a rom , but if u need some suggestion, help, my brain's full of idea , things (extra-feature , extra-app just like viper4android ) that people would see on any touchwiz rom . That's my telegram @sokazuya
Click to expand...
Click to collapse
Forgot to tag you*
Well unfortunately, the project is halted because I messed up and lost root LOL
I'm going to have to wait another 7 days to regain root, only 70 hours to go now xD
ShaDisNX255 said:
Well unfortunately, the project is halted because I messed up and lost root LOL
I'm going to have to wait another 7 days to regain root, only 70 hours to go now xD
Click to expand...
Click to collapse
Lmfao!
ShaDisNX255 said:
No, it is not possible. The J6 uses different display drivers.
I am currently working on porting a ROM from the J5 Pro with great features, but I am still trying to eliminate some bugs.
I may share a BETA soon, but I don't know yet.
So far I don't think any other recognized developer will pick this device up. It offers nothing new to previous phones, some would say it is just a waste of a phone lol
(I got it for free)
So yeah.
Click to expand...
Click to collapse
Are you going to support j4 with this Rom too?
mahmmoud1231 said:
Are you going to support j4 with this Rom too?
Click to expand...
Click to collapse
No, I can't support a device I don't have.
ShaDisNX255 said:
Well unfortunately, the project is halted because I messed up and lost root LOL
I'm going to have to wait another 7 days to regain root, only 70 hours to go now xD
Click to expand...
Click to collapse
Tell me if it sucess and also tell me if you wait those 168h if you boot in download the rmm prenormal state will automatically disappear
Easy Root
ShaDisNX255 said:
Well unfortunately, the project is halted because I messed up and lost root LOL
I'm going to have to wait another 7 days to regain root, only 70 hours to go now xD
Click to expand...
Click to collapse
For me, I flashed stock rom, right after it I flashed TWRP, noviety and rmm disable zip (2zips) and it worked. I had not to wait for 7 days.
Model : J600F Pakistan.
Hi guys
I have j600G it's for india unfortunately
It's possible change it to j600f with flashing new frimware ?
fereidooni said:
Hi guys
I have j600G it's for india unfortunately
It's possible change it to j600f with flashing new frimware ?
Click to expand...
Click to collapse
If you are rooted you can just change the build.prop
But, may I ask why you want to switch to J600F?
ShaDisNX255 said:
If you are rooted you can just change the build.prop
But, may I ask why you want to switch to J600F?
Click to expand...
Click to collapse
I think he meant that he wanted to change his device's model. Really. Not just visual like that build.prop edit.
---------- Post added at 01:54 AM ---------- Previous post was at 01:53 AM ----------
fereidooni said:
Hi guys
I have j600G it's for india unfortunately
It's possible change it to j600f with flashing new frimware ?
Click to expand...
Click to collapse
No, you can't. Flashing a different model's firmware will fail.
ShaDisNX255 said:
If you are rooted you can just change the build.prop
But, may I ask why you want to switch to J600F?
Click to expand...
Click to collapse
I just wanna know if it's possible
Thanks
---------- Post added at 11:52 AM ---------- Previous post was at 11:51 AM ----------
OreoLasagne said:
I think he meant that he wanted to change his device's model. Really. Not just visual like that build.prop edit.
---------- Post added at 01:54 AM ---------- Previous post was at 01:53 AM ----------
No, you can't. Flashing a different model's firmware will fail.
Click to expand...
Click to collapse
Thanks mate