I've looked around and I see people have some problems with HDMI and Remix .. but I don't get any image at all. I thought it's simply not supposed to work, but now I see other people got it working, even with problems.
I have ASUS N55S notebook. Internal screen works just fine, but connecting anything over HDMI just does nothing. Am I supposed to turn it on somewhere ?
Lenovo W500 Laptop, tried with VGA, DVI and Displayport, nothing! Wifi Screen castign doesn't work either.
I have a Lenovo Idea Pad Z710, internal screen and external screen both work with out problem's.
There is no way to toggle between screen's which I can find.
Dr.Sid said:
I've looked around and I see people have some problems with HDMI and Remix .. but I don't get any image at all. I thought it's simply not supposed to work, but now I see other people got it working, even with problems.
I have ASUS N55S notebook. Internal screen works just fine, but connecting anything over HDMI just does nothing. Am I supposed to turn it on somewhere ?
Click to expand...
Click to collapse
Mine works on Dell 15r 5520 laptop with Intel+AMD dual graphics, but it shows the lower (laptop screen) resolution on my external Dell 27'' monitor in the middle of the screen with thick black frame around it. The external screen is connected via HDMI.
I've searched all over the Internet for the solution and the only successful one was to phisically unplug the laptop screen. The system will then "think" my external screen is a primary one, and adjust the resolution accordingly.
If there is anyone with the "normal" solution here, please tell me how to do it.
Thanks!
I can't believe nobody solved this issue!!??
@djcukor in Remix 2 you could use external display in exclusive mode - screen shown only on the external display. Now it's only mirrored - so the resolution is currently not adjustable. No idea how's the status on this.
Related
Every time I plug the TF to the tv I lose about half an inch on all sides. Don't see any hdmi settings and I tried messing with the tv settings. Anyone know how I can get it to fit properly
cyi1 said:
Every time I plug the TF to the tv I lose about half an inch on all sides. Don't see any hdmi settings and I tried messing with the tv settings. Anyone know how I can get it to fit properly
Click to expand...
Click to collapse
Have you tried going through an a/v receiver using the hdmi inputs on it? If so, are the results better or worse?
I found nothing in the manual other than the mention of the micro hdmi port out.
What model is your TV?
What you are describing sounds like Overscan, not sure on the size of your TV but my TV has some Overscan depending on the source.
My Prime has not arrived yet, sorry I cannot help you further.
yea happened to me too, I ended up fixing it by changing some scan settings in my TV
Change your TV settings from HDTV to PC mode or something similar to that. I did that On my Philips 1080P LCD and its working perfectly now. Strange because my Samsung automatically adjusted for my tablet.
If you dont have a PC to HDTV setting then just mess around with the settings/ features. Most models have things to help you get the best display possible for your situation.
So basically when I enable HDMI out to my 2560x1440 screen (u2711), the motorola logo displays just fine, but when I select a mode like gallery or mirror, the whole HDMI screen starts flickering and showing portions of the screen every couple of seconds.
The phone itself works just fine, and HDMI out with the same cable works fine on my HD ready TV. The HDMI port on my u2711 is fine as well, at least it works with my xbox 360 in 1080P without error.
The odd thing is, as soon as I enable Picture by Picture on my screen, the phone displays just fine on it's half of the screen, albeit in 640x480.
Is this a known bug, or does anyone have any suggestions on fixing it? Do I have to disable DDC/CI? My cable has ethernet capabilities, so the high res shouldn't be the problem, right? Or did I just buy a ****ty/faulty cable.
I don't think the phone is capable of rendering at a resolution that high, the gallery is in 3D-mode and it's probably running out of Vram..
Maybe force it to 1080p somehow?
I never got the HDMI cable working from my pc high end gfx card to my dell u3011 . Never tried from my Razr but I guess the same applies to it.
Only dual DVI and DisplayPort worked.
Without checking I think the highest res possible on hdmi is 1200p ?
I would always try a different cable before giving up. 9/10 times when I have seen flickering on an HD display it has been a crap/faulty cable, and I have seen it a lot as until recently I was Digital TV installer. Used to carry loads of spare cables in the van as it used to happen so often. You don't have to spend loads on a cable but the very cheapest are usually best steered clear of unless you're lucky. I'd usually go for a £10-£15 cable (15-20 EUR) and not a cheap ebay one.
Thanks for your advice guys!
The max res for 1.4 is 4096×2160, and for 1.3 it's 2560x1600, so my resolution should be fine I think.
I paid ~20 euros for the cable, it's brandless, but from a well known cable retailer here. I don't have any others to test, and compatibility with my u2711 isn't vital to me, so I'm not going to buy another cable, but I still think it's odd that it doesn't work.
I will report back if I find another cable and it makes a difference!
Basics. I have a Coby MID-7042 tablet. The touch panel cracked on it so it is useless and cost to much to get fixed. With that said I am now using the tablet as an Android TV. I have hooked the tablet up to my HDMI TV and am using a mouse on the USB port to control the tablet. The thing is I am thinking of ripping the tablet apart and removing the screen and battery and other items. The thing is if I remove the LCD screen then I cannot get into recovery if needed and I cannot see the system booting on the HDMI connection.
Is there any way to force the HDMI connection to be the primary or will this happen naturally when the LCD panel is disconnected?
Since Android is Linux shouldn't there be a value somewhere that allows the selection of what screen is the primary. I know this can be done since there are quite a few Android TV boxes out there that use the HDMI connection as the primary display.
If you can help at all that would be great!
Thanks
Hi,
I have the same problem. Searched Google and XDA forum, no answer found...
reddragon72 said:
Basics. I have a Coby MID-7042 tablet. The touch panel cracked on it so it is useless and cost to much to get fixed. With that said I am now using the tablet as an Android TV. I have hooked the tablet up to my HDMI TV and am using a mouse on the USB port to control the tablet. The thing is I am thinking of ripping the tablet apart and removing the screen and battery and other items. The thing is if I remove the LCD screen then I cannot get into recovery if needed and I cannot see the system booting on the HDMI connection.
Is there any way to force the HDMI connection to be the primary or will this happen naturally when the LCD panel is disconnected?
Since Android is Linux shouldn't there be a value somewhere that allows the selection of what screen is the primary. I know this can be done since there are quite a few Android TV boxes out there that use the HDMI connection as the primary display.
If you can help at all that would be great!
Thanks
Click to expand...
Click to collapse
I bought a Viewsonic g tablet on sale a year and a half ago and until this day it meets the light. (It was only touched when purchased then back to the box)
I followed the instructions to the letter (new on this) and everything seems to be working, I have a Malata zpad dock DS-A002 supposed to be fully compatible with the g tablet and I placed the tablet on the dock, connected HDMI in the TV but nothing happens.
Don't see an option in settings to select output to TV.
Many thanks in advance.
Forgot to mention, tried this on the TV which is an LG and monitor which is a Hanns-G
I have to say that this is a first so far. When I read this I went ahead a connected up my dock which is the same make and model as yours to my TV and it works. HDMI is sometimes a pain especially with the newer TV's that are out. You also got to have the dock powered up if you haven't done that. If the power cord is connected and the tablet displays the dock clock then connect the HDMI to the dock with the TV turned off. After connection is made turn on the set and make sure you are on the proper input. It should work, but if not try a different TV.
Sent from my Super BadA$$ Bionic.
Thanks for the reply
The LCD TV is a couple of years old, the LCD monitor is 3ish years old
My mother has a 5yr old LCD TV, that's another TV I could test on
The dock is powered up using the charger that came with the gTab
The tablet displays the dock clock when placed on the dock
I've tried different combinations:
Dock powered up, TV off and plugin cable, gtab on then place on dock, turn TV on
Dock powered up, TV off and plugin cable, gtab off then place on dock and power on, turn TV on when gtab is on the dock clock
Dock powered up, TV on and plugin cable, gtab on then place on dock
Dock powered up, TV on and plugin cable, gtab off then place on dock and power on
TV detects HDMI when the gtab is placed on the dock, but after 3-5 secs says no signal meaning it does detect HDMI (shows up as an option, I've tried on all 3 HDMI inputs btw) but it doesn't show up an image.
I've tried these methods in the TV and the monitor, nothing
Doesn't make sense to me since everyone in the thread hasn't had this issue, should be plug-and-play right?
http://forum.xda-developers.com/showthread.php?t=1900562
Should I backup the current install and go back to the stock crappy ROM just to test it out? (Wipe everything as instructed before doing so?)
Thanks
No since in going all the way back to stock to test it out. Have you by chance tried a different HDMI cable. You might have a faulty connection or even a dirty connection will make it loose its connection. You may also want to check to see if the TV has a default native setting set. The gtablet will display a image like a PC I believe. Will have to connect it up again to see what res. the device puts out at default.
Alright find the link up solution. I tried different ways of connection all with failure to display on my TV with the exception of this. Try it and you will be satisfied.
1st. Place you dock near your TV with power cord and HDMI cable both connected. Don't connect other end of HDMI cable to TV just yet.
2nd. Have tablet turned on and fully booted up. Then place tablet on dock and leave the dock clock displayed.
3rd. Turn on TV and set the input to the HDMI connection you are about to connect to. Then connect HDMI to that input that is in TV and the display should reflect the device.
Let me know if this works. Thanks.
Sent from my SmoOth A$$ Gtablet
Hi, yes I tried 2 different cables, different ports, cleaned up (blow air) into the TV and and dock ports (dock is brand new never used from a year+ ago)
I couldn't find a default native setting on the TV.
Really sucks that there is an awesome ROM for the gtablet and I can't use it on the bigger screen, intention was to watch Netflix and movies, besides reading
The tablet is one of those projects that never happened and when I finally manage to get it going this happens...:crying:
Read the addon that I posted. It will connect if you connect it in that order.
Sent from my DROID BIONIC using xda app-developers app
Hi Nobe, it still doesn't work. I just don't get it.
TV recognizes the connection (shows as plugged-in) but says no signal.
Unfortunately monitor is not as advanced as a TV, simply says no signal.
Faulty dock? It charges fine
Thanks
Went to stock, and image shows up fine on TV
Is there something I could change, DPI,res? on the current SmoOth install (have backups) that could potentially fix the issue?
Thanks
exmagus said:
Went to stock, and image shows up fine on TV
Is there something I could change, DPI,res? on the current SmoOth install (have backups) that could potentially fix the issue?
Thanks
Click to expand...
Click to collapse
I keep mine at 160dpi. The issue is that you have to connect everything to the dock before connecting it up to the TV. For some strange reason the dock settings doesn't recognize the connections being made. The dock works fine it is the drivers I believe that are kernel related. If you power up the dock with the HDMI connected to it, then place tablet on the dock, then connect the HDMI to the TV's input with the TV on and turned to that input. Then it should display onto the TV without issues. Done this multiple times when this came up and this was the only way for me to get the dock to display the output of the tablet.
Sent from my SmoOth A$$ Gtablet
The thing is I did exactly as you said multiple times to be sure.
Using SmoOth image does not come up
Restored to stock ROM and image shows up fine
I'm going to try a fresh SmoOth install and see how it goes or is there any way to check the drivers or make adjustments to it?
Thanks
Any advice on checking the drivers?
Thanks
Actually the drivers are there and working the way they are suppose to be. I do believe that it might in the way it is communicating with the TV still. I am currently working on something that might help out, but I want to test it fully before suggesting it since most everyone doesn't use this feature.
Sent from my SmoOth A$$ Gtablet
It is really odd that doing the same process on the stock rom works.
Thanks a lot for the follow-up Nobe
Curious if anyone found a solution to this problem? I too have the exact same issue with my Gtab even after trying the solution posted with different cables and such. Stock rom works fine though.
I'm wondering if Nobe found something
Hi. Has anyone tried using a USB C-to-HDMI cable to connect Mate 10 to a monitor. How do you like it? Do apps scale well on monitor? Assuming you hooked up a bluetooth keyboard and mouse, have you tried editing a document? Thanks!
still waiting for my Mate 10! But one of the reasons for getting one is USB-C to HDMI. One thing I noted when sourcing a cable - if you use a "standard" cable you won't be able to stream Netflix/Amazon streaming due to lack of "HDCP" compliance. I got a cable that was compliant for a few euro more on Amazon. Just keep this in mind if you want to stream Netflix etc.
Does anyone know if this would work with a Surface Pro 4? The SP4 has a mini display port, so maybe with a mini display port adapter, we can connect Mate 10 to the SP4 and view desktop mode on the tablet. Would that work?
podgeandrodge said:
still waiting for my Mate 10! But one of the reasons for getting one is USB-C to HDMI. One thing I noted when sourcing a cable - if you use a "standard" cable you won't be able to stream Netflix/Amazon streaming due to lack of "HDCP" compliance. I got a cable that was compliant for a few euro more on Amazon. Just keep this in mind if you want to stream Netflix etc.
Click to expand...
Click to collapse
So how and where to buy a cable to bypass this restriction, I am trying to play xfinity app and it tells me there is a restriction OMG wth it becoming Apple this android
rjan22 said:
So how and where to buy a cable to bypass this restriction, I am trying to play xfinity app and it tells me there is a restriction OMG wth it becoming Apple this android
Click to expand...
Click to collapse
Well the cable I have purchased is the one linked below - which the manufacturer says (elsewhere) is the HDCP compliant one. I can't guarantee you that it will work though!
I am expecting my phone and this cable this week so will try out!
https://www.amazon.co.uk/gp/product/B06XS7T4GP
NOTE - this manufacturer also sells usb-c to hdmi cables that it says are NOT compliant. Only one above is one they say is compliant.
podgeandrodge said:
Well the cable I have purchased is the one linked below - which the manufacturer says (elsewhere) is the HDCP compliant one. I can't guarantee you that it will work though!
I am expecting my phone and this cable this week so will try out!
https://www.amazon.co.uk/gp/product/B06XS7T4GP
NOTE - this manufacturer also sells usb-c to hdmi cables that it says are NOT compliant. Only one above is one they say is compliant.
Click to expand...
Click to collapse
Thanks I'll look for it here in Amazon US, no problem returning so might as well try.
I tried it out briefly when I got the phone.
I used a type c to HDMI adapter, with a normal HDMI cable.
Some things I noticed:
I think this drained the battery more than anything else I've done with the phone (including gaming).
The phone was noticeable warm after the session.
My phone rebooted shortly after the desktop session. Like it crashed.
The phone states it's in reverse charge mode, like juice is also bring drained from the phone to the TV.
I couldn't get YouTube to work full screen without borders. Unless I was mirroring the phone screen (which means phone screen also remains on).
I've mixed feelings, it's early days I guess.
Ok, I am still waiting for the cable from Amazon but ended up purchasing an adaptor from Maplin.
Worked fine - as in outputted screen of phone (in phone or 'desktop' mode).
But I did notice that the screen resolution as outputted was far less than the resolution of the screen - I would have expected the 1080p display to mirror across to the TV.
It wasn't that it was bad, just blurry text and not crisp when looking at video. Whereas in the past, with a phone with an actual hdmi connection as opposed to usb-c, or indeed when outputting a media player with hdmi or casting using chromecast, the quality is perfect.
Perhaps I'm doing something wrong or perhaps the Maplin cable is not up to speed. Open to ideas.
podgeandrodge said:
Ok, I am still waiting for the cable from Amazon but ended up purchasing an adaptor from Maplin.
Worked fine - as in outputted screen of phone (in phone or 'desktop' mode).
But I did notice that the screen resolution as outputted was far less than the resolution of the screen - I would have expected the 1080p display to mirror across to the TV.
It wasn't that it was bad, just blurry text and not crisp when looking at video. Whereas in the past, with a phone with an actual hdmi connection as opposed to usb-c, or indeed when outputting a media player with hdmi or casting using chromecast, the quality is perfect.
Perhaps I'm doing something wrong or perhaps the Maplin cable is not up to speed. Open to ideas.
Click to expand...
Click to collapse
Interesting. Sounds like you are using Mate 10 Pro. Wonder if resolution is improved using Mate 10.
Jamdonut said:
I tried it out briefly when I got the phone.
I used a type c to HDMI adapter, with a normal HDMI cable.
Some things I noticed:
I think this drained the battery more than anything else I've done with the phone (including gaming).
The phone was noticeable warm after the session.
My phone rebooted shortly after the desktop session. Like it crashed.
The phone states it's in reverse charge mode, like juice is also bring drained from the phone to the TV.
I couldn't get YouTube to work full screen without borders. Unless I was mirroring the phone screen (which means phone screen also remains on).
I've mixed feelings, it's early days I guess.
Click to expand...
Click to collapse
I was wondering about the battery drainage. Some cables I've seen have an additional input for charger. Maybe that might help
mscion said:
Interesting. Sounds like you are using Mate 10 Pro. Wonder if resolution is improved using Mate 10.
Click to expand...
Click to collapse
No, normal Mate 10.
Other cable arrived and same situation. To clarify, it's fine, and perfectly watchable, just not crystal clear. It strikes me that this method seems like the usb-c to hdmi cable is simply mirroring the display of the phone rather than actually outputting the video file itself independently - as would happen with a HDMI connection as you used to get on some phones. Perhaps this is something to do with the issue.
podgeandrodge said:
No, normal Mate 10.
Other cable arrived and same situation. To clarify, it's fine, and perfectly watchable, just not crystal clear. It strikes me that this method seems like the usb-c to hdmi cable is simply mirroring the display of the phone rather than actually outputting the video file itself independently - as would happen with a HDMI connection as you used to get on some phones. Perhaps this is something to do with the issue.
Click to expand...
Click to collapse
......hope you post result of amazon cable! have a nice day!
It was amazon cable I referred to above. So same with maplin adaptor and amazon cable. Tried outputting a HD YouTube video but not much different. As I say, fine, but not as clear as would expect if you copied that file to a media player attached to a tv via hdmi
Hooked mine up with the Huawei supercharger and cable and it slowly drains the battery in desktop mode. Without charger it will suck down the battery fast. Benched with Antutu and got 175k on phone. In desktop on 30" monitor got 157k. Still faster than my Mate 9. My S8+ in Dex was just about worthless. Also with the M10 in desktop with wired mouse has zero lag. Bluetooth mouse a different story. So gaming is pretty good on a monitor.
Ok, I "solved" my problem by fluke. I would love if someone more techy than me could explain but this is what I did to fix the fact that the HDMI output looked more like 640x480 than a hi def picture.
Went to TV settings, and selected advanced, HDMI settings, and Changed HDMI "Auto" mode to HDMI Graphic mode (choice of Graphic/Video - video was default and was crap). As soon as I did this I had perfect outputted photos and videos.
According to one tv manual I found on a search:
"Graphic: HDMI input timing set to Graphic mode (PC) - The image is full scan.
Video: HDMI input timing set to Video mode. The image is over scan."
According to someone on a completely unrelated PS4 forum:
"Basically by changing the HDMI mode to graphic, the HDMI output (be it gaming console, pc, or cable) bypasses "extra" processing features of the TV that
make the game and TV broadcasts look crappy and also causes lag. By bypassing those features you will get a much clearer picture."
Either way, it's fixed. On my tv. And on a shop tv the same issue. So given that I've connected previous phones with hdmi connections a few years ago without issues, this suggests that it is something to do with how the Mate 10 outputs signals in a way that TV recognises?
Love to hear an explanation from the experts. Thanks.
Edit: someone else with a similar issue on another device - so it seems the issue is that the Mate 10 is not recognised by most Televisions as a "PC" which would correct hdmi mode to "graphics" ?
"When I switch between the Blu-Ray and the PC on two separate HDMI inputs, the TV doesn't detect that's it's connected to a PC, so it doesn't switch from video to graphics mode - which is required for it to look good as a computer monitor.
Since the TV deosn't recognize the PC and auto switch to graphics mode, when I switch from Blu-Ray to PC, I have to dig down into the menu and switch the HDMI mode to graphics manually - and then back when I go to the Blu-Ray. -- Major pain if I'm switching back and forth."
Any ideas? Is this something Huawei could fix in firmware?
podgeandrodge said:
Any ideas? Is this something Huawei could fix in firmware?
Click to expand...
Click to collapse
It looks like its related to the TV resolution : I have the same issue (640*480 resolution) when I connect the mate 10 pro to a 4K native TV but it works perfect when connected to a full HD TV !! It's a shame as 4K tend to be the standard display, so I guess Huawei should fix it whith a firmware update. Any other solution (HDMI 2.0 cable maybe??) ?