I did not about this kernel needed unlocked bootloader, now i cannot install a stock rom cuz my pc cant see my phone with flashtool.
My z2 Wont boot, just will vibrate once everytime i press power bottom. I cannot access to anything just black screen. The light flash green when i connect the phone to the pc.
04/007/2016 15:07:36 - ERROR - Drivers need to be installed for connected device.
04/007/2016 15:07:36 - ERROR - You can find them in the drivers folder of Flashtool.
https://www.youtube.com/watch?v=ueuKBhNCOHY Fixed my problems.
Related
Hello guys, i need help ..
I wanted flash this custom ROM on my LwW, so I rooted device, installed CWM, unlocked bootloader, wiped data/cache/dalvik and flash it. But now is phone lagged on boot screen (ŠONY logo) ... i cant go to CWM, when i want restore via SUS, it says: The phone contains modified software that cannot be updated; and flashtool lags in flash process in text - Reading device information.
Can I do anything? Please help. :crying: thanks
Flashtool should work. Make sure you install the flashtool drivers properly, then,
1. open flashtool
2. Shut down your mobile
3. Connect data cable only to the computer.
4. press and hold only the volume DOWN button in your device and plug in the cable to the phone and the notification led should light up green indicating that the phone is into flash mode then it should be recognized by flashtool.
(make sure the flashtool drivers are properly installed and the USB port you are using in your computer is high speed USB port)
.:goutham:.
gouthamthemostwanted said:
Flashtool should work. Make sure you install the flashtool drivers properly, then,
1. open flashtool
2. Shut down your mobile
3. Connect data cable only to the computer.
4. press and hold only the volume DOWN button in your device and plug in the cable to the phone and the notification led should light up green indicating that the phone is into flash mode then it should be recognized by flashtool.
(make sure the flashtool drivers are properly installed and the USB port you are using in your computer is high speed USB port)
.:goutham:.
Click to expand...
Click to collapse
I two days ago we had many problems with Flashtools ... In the middle of Flashing the device stopped working always the same error 31. I tried for over 30 vezez and sometimes not recognize the computer. Oh I did so I removed the battery from the phone and I slept early the other day when I woke up I was flashing again and it was the first time I was really surprised. I ran back to Stock GB Rom with kernel bboof ....
Good ! :beer::thumbup:
.:goutham:.
gouthamthemostwanted said:
Flashtool should work. Make sure you install the flashtool drivers properly, then,
1. open flashtool
2. Shut down your mobile
3. Connect data cable only to the computer.
4. press and hold only the volume DOWN button in your device and plug in the cable to the phone and the notification led should light up green indicating that the phone is into flash mode then it should be recognized by flashtool.
(make sure the flashtool drivers are properly installed and the USB port you are using in your computer is high speed USB port)
.:goutham:.
Click to expand...
Click to collapse
Still lags on "Reading device information" .. but i relock bootloader via toolkit by quangnhut123, next SUS recognized device and i flashed back to 4.0.4 stock ROM .. next i tried flash Real ICS r6 ROM, but that same progress like before (phone lags on SONY logo, and i cant do anything) .. what Im doing wrong? When i flashed, i had rooted 4.0.4 stock ROM, fw .578, unlocked bootloader, installed CWM...
deryck.vyhybkar said:
Still lags on "Reading device information" .. but i relock bootloader via toolkit by quangnhut123, next SUS recognized device and i flashed back to 4.0.4 stock ROM .. next i tried flash Real ICS r6 ROM, but that same progress like before (phone lags on SONY logo, and i cant do anything) .. what Im doing wrong? When i flashed, i had rooted 4.0.4 stock ROM, fw .578, unlocked bootloader, installed CWM...
Click to expand...
Click to collapse
Which kernel you are using ?
did you wiped everything before installing custom rom ?? (data,system, cache, dalvik cache)
My Xperia Ray is originally from SFR. Simlock is removed (code from SFR).
I tried to unlock bootloader using control point method - S1Tool said it's OK (I don't know how to check if it is really OK). I flashed new radio (v.77) without problem using flashtool.
Now I'm trying to enter fastboot mode to change kernel and ROM - no success. Nothing happens if I connect the telephone to PC with Vol+ pressed (it just starts charging). Nothing if I start it Vol+ pressed (it just starts normally). The LED is never flashing blue.
I tested another Xperia Ray (from Bouygues Telecom) - the same thing, no fastboot mode.
Any suggestions?
So,did you have the drivers properly installed on your PC?
You can find it while installing Flashtool.
install drivers from folder in flashtool and then :
1. Disconnect phone from USB
2. Turn off phone (make sure you have at least 50% battery) and wait 30 seconds.
3. Hold the 'Volume UP key' WHILE inserting the USB. --> LED turns blue = fastboot mode.
4. Leave the phone turned off
Sure, the driver is installed.
Nothing happens when I try to connect it Vol+ pressed, NOTHING.
The PC does not see the phone, the phone goes to charging, the LED does not flash blue.
:crying:
no os no recovery no pc detection
hi i'm having a similar problem With my xperia ray
where i have done this:
went into recovery mode via pvyparts
formated system formatted cache formatted dalvik caches
then partioned the sd card
then selected reboot recovery
stuck in boot logo
then phone turned off
pc will not detect the phone
installed 4.2 adb drivers pc companion drivers
flashtool will not detect the phone either
thank you for all the help
Hi
I am on a Neo, running Super Jelly Bean 7. Today I do something stupid then I want to change the kernel but I now UNABLE TO CONNECT THE PHONE IN FASTBOOT or FLASHMODE
I did try followings"
1) Phone off, press & hold Menu while connecting cable. Led flash blue once, then led off and Sony (text logo) appear
2) Phone off, press & hold Back while connecting cable. Led flash green once, then led off and Sony (text logo) appear
3) Phone off, then power on the phone. Few first seconds when booting, led is purple, then led off and the phone boot normally. When I connect it to my PC, flashtool recognizes it properly (says its a Neo phone). I tried to use flashtool to reboot the phone into fastboot via ABD. The phone reboot but not enter fastboot (screen shows like 1st case)
I also try to switch off phone for few mins, clear system/cache/data... restore the phone from my backup, or even make clean install new custom ROM (from zip file)... but all not work!
In my PC, I reinstall adb/fastboot/flashmode drivers... but seem nothing work
My system:
Xperia Neo - Unlock BL (via Sony site) - Rooted - Super Jelly Bean 7.0 - Shardul Seth PAC 4.1/CM4.1 Kernel from this thread http://forum.xda-developers.com/showthread.php?t=2043906
PC: Windows XP with full drivers for Xperia 2011 installed
Pls help me to identify the problem so that I can flash my phone a again
PS: I did flash ROMs (stock and custom, GB, ICS and JB) many times. And of course, I entered fastboot/flashmode many times.
This is hardware issue... same problem with me tried everything setool2, 4se nothing worked. .. Now your device can be flashed with testpoint if you manufacturing date is below 12w10... Only stock firmware
Sent from my MT11i using xda app-developers app
Hi Kana
Just to inform you that I have solved the issue but not really sure what is the root cause: Following is steps I make
- New (another) PC
- Another USB cable - Important to make sure good connection between PC and the phone
- Install updated driver from Sony site
- When connecting device to PC, DO NOT use automatic driver install. I manually chose the updated drivers
After that I now can reboot the phone into flashmode/fastboot again
Hope you will overcome your case
Hello guys,
As I said on the header I have an issue with unlocking thebootloader of my xperia.First of all I try to unlock it on my pc where I have windows 8.1(I suppose this is the problem), so when I try to enter the fastboot mode the light turns blue and after 2s it turns into red and enters charge mode. I have tried both flashtool and the manual way tha sony indicates.I try to install the drivers manually when in fastboot but I can't cause it disconnects automatically befoore I find 'em. Do you have any idea what to do?Also the flashtool gives me these two error messages
19/044/2015 12:44:00 - ERROR - Drivers need to be installed for connected device.
19/044/2015 12:44:00 - ERROR - You can find them in the drivers folder of Flashtool.
Thank you in advance
Hello!
I was installing magisk on my Z Ultra. I un-root and everything and i installed this package from tutorial. I restared my phone and now its only vibrates and nothing appears on LCD. When i connect my charger its only blinking red LED. I know its going into fastboot mode. I don't know if its going to flashmode. Its only flashing red and for 1 second green and its desappers. How can i unbrick the phone? :C
Hey there make sure you have installed the fastboot and flashmode drivers
Firstly download the latest FTF package (stock rom)
Download androxyede Sony flashtool latest version
Connect device in flashmode (the flashtool will say device connected in flashmode)
Selected the proper FTF you downloaded and connect the device to pc via holding power down button and flash the FTF
TLDR
Install flashtool
Insert tutorial here.
Flash stock ftf
Profit.