{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 13.0 for the Samsung Galaxy A7 (A700FD) Only!
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Warning : This CM13.0 is only for A700FD Variant. DO NOT INSTALL ON ANY OTHER VARIANT!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Bugs and changelogs are in 2nd post !
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Installation
1. Make sure you have updated to stock 5.0.2
2. Download the ROM from the link below
3. Download 6.0.1 GAPPS
4. Transfer the zip files to your SD card
5. Reboot to recovery mode ( Vol UP + Home + Power )
Note: It is highly recommended to use TWRP recovery
6. Optional: Do nandroid backup
7. Wipe data / Factory Reset
Note: Needed if you are updating from other andorid version or stock
8. Install CM zip and GApps zip
9. Reboot to system
10. And setup ur device
Enjoy!
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Download
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Source
Kernel Source
Check out the ROM Source available on Github.
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Credits
Cyanogenmod team
@TheWhisp
@ritley (Big Thanks for testing all my builds and providing logs)
@k2wl
If i missed someone contact me!
XDA:DevDB Information
CyanogenMod 13, ROM for the Samsung Galaxy A Series
Contributors
jackeagle
Source Code: https://github.com/MSM8939-Samsung
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 5.x.x (A700FDDDU1BPA2) Firmware
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-03-10
Created 2016-03-08
Last Updated 2016-05-16
Reserved
Bugs and Issues
Code:
- NFC ( will never be fixed)
Let me know if you find other bugs! :)
--------------------------------------------------------------------------------------------------------------------------------------------
Submitting Bug Reports :
If you find some bugs report it with logs and detailed information of the issue.
Do not report bugs if custom tweak is done.
Do not report bugs if Xposed is installed!
--------------------------------------------------------------------------------------------------------------------------------------------
Changelog:
Code:
June 07, 2016
- Added Gello Browser
- Fixed 1080p Video Recording.
- Added Slow Motion option
- Kernel Updates
- Merged with latest changes from CM
May 27, 2016
- Disabled NFC.
- Fixed Bootup Speed (Blazing fast)
- Merged with latest changes from CM.
- Fixed battery drain issue.
May 15, 2016
- Fixed Boot up speed
- Fixed GPS and Location.
- Updated WLAN Driver (WiFi) to Marshmallow.
- Kernel updates.
- Updated blobs to latest Samsung release.
- Fixed Sepolicy Denials
- Merged with latest Marshmallow Release 6.0.1_r43
- Merged with latest CM upstream changes.
April 02, 2016
- Fixed Proximity Sensor Issue.
- Fixed Incall and lockscreen touch wakeups.
- Added Proximity Wake Up
- Fixed CPU Freq control
- Fixed Aggressive Battery Drain
- Fixed Deep Sleep
- Enabled Core Control
- Enabled CPU UID
- Merged with latest CM upstream Changes.
March 23, 2016
- Fixed LTE Data.
- Fixed Switching between 2G | 3G | LTE .
- Added Multiple Preferred Network Mode Options.
- Fixed Capacitive keys Backlight ( Now Capacitive Backlight lights up only when button is pressed. Now it is similar to stock ).
- Enabled Call Recording.
- Removed Charging Property.
March 19, 2016
- Added MIDI USB Functionality
- Fixed GPS Location Service
- Updated TCP Buffers
- Switched to OpenSource GPS HAL
- Updated Vendor
- Added Ambient Display / Doze
- Merged with Upstream CM Changes.
March 13, 2016
- Fixed USB MTP
- Fixed TimeService FC's
- Added Snap Camera App
- Kernel Updates
- Merged with latest changes of CM
March 10, 2016
- Fixed RIL (Calls , Messages etc)
- Fixed Audio Distoration
- Fixed Music Playback
- Fixed Video Playback
- Fixed Video Recording
- Fixed Audio Recording
- Fixed Recent Keys Issue
- Fixed Mic Input
- Fixed Audio on Call
- Fixed Wifi Stability
- Merged with latest changes from CM.
- Merged with latest android-6.0.1_r17
March 07, 2016:
- Initial Release
--------------------------------------------------------------------------------------------------------------------------------------------------
Tips :
To activate Developer settings : Settings -> About phone -> press Build number 7 times
To activate 3-way reboot go to Developer settings and select "Advanced reboot"
Root is disabled by default, enable it from Developer settings - Root access
--------------------------------------------------------------------------------------------------------------------------------------------------
Donations
If you like our works you can donate me which will be used to pay server expenses and other costs
Use "Send payment" option on paypal ( [email protected] ) because "Donate" option is not available in my country. Thanks
Downloads
June 07 Release
May 27 Release
May 15 Release
April 02 Release
March 23 Release
March 19 Release
March 13 Release
March 10 Release
March 07 Release
FAQ
Frequently Asked Questions (FAQ).
Currently using Samsung Stock 5.0.2 Rom. Installed CyanogenMod 13 and it boot loops. Stuck on the Samsung logo what to do?
You have to Install Samsung Stock Firmware (Indian). The reason is because the older firmware causes Modem Crash due to which CM boot loops. You can download firmware from following link.
A700FDDDU1BPA2
I have heating issues with my device. What is the reason?
On CyanogenMod 13 there are no heating issues. The device does heat if you use your device aggressively, like if you are using WiFi, LTE, 3G, Data Services, Games continuously then it is normal that your device heats up. It is due to the load on the CPU. It will happen in stock too.
cant wait for this to be fully functional.. :victory::victory::victory:
i cant test it right now since im using my phone for calls and sms, but once this is fully functional, i will say goodbye to my stock ROM.. thanks jackeagle!
Electroflux003 said:
cant wait for this to be fully functional.. :victory::victory::victory:
i cant test it right now since im using my phone for calls and sms, but once this is fully functional, i will say goodbye to my stock ROM.. thanks jackeagle!
Click to expand...
Click to collapse
Haha well yes working on RIL. Once that is fixed you can use this Rom has daily driver. Since i dont own the device i work with testers. working on it!
Same with Electroflux003. Can't risk my A700FD yet but the frustration is getting real because sammy can't even update it to 5.1.1 unlike others say J7 2015. Seeing someone working on cm 13 for the phone is a godsend. Thanks jackeagle!! ☺
This is absolutely wonderful news Jackeagle. I'd love to try this ROM as soon as calls/sms starts working. Great job man. ?
You're a saviour.
Nice. This is officially cygenmod..
What we can do if we want calls and sms ??
will there ever be a cyanogenmod for this device with RIL?
Lancelot251 said:
will there ever be a cyanogenmod for this device with RIL?
Click to expand...
Click to collapse
Yes Jackeagle is gonna bring it as you can see.. As he'z working with Testers and doesnt own the device, it will be delayed probably or will take more time.
@jackeagle Thanks a lot for compiling cm13 for Galaxy A7. Much appreciation for your work. Hoping you get more time to work on fixing RIL in this build.
Lancelot251 said:
will there ever be a cyanogenmod for this device with RIL?
Click to expand...
Click to collapse
Have patience. The developer already said just 2 posts above that he is working on it.
plz tell me.... sir....
Do you mean that calls nd messages are not working??? Nd tell me about other bug also....... plz...... u m having this device.......
---------- Post added at 12:08 PM ---------- Previous post was at 11:55 AM ----------
Will calls nd sms work on it nd should i install it or not....... nd is there any chance of bricking plz reply......
smart123123 said:
Do you mean that calls nd messages are not working??? Nd tell me about other bug also....... plz...... u m having this device.......
---------- Post added at 12:08 PM ---------- Previous post was at 11:55 AM ----------
Will calls nd sms work on it nd should i install it or not....... nd is there any chance of bricking plz reply......
Click to expand...
Click to collapse
Like he said in the 2nd post, calls and sms aren't working along with recent key....
He also said that he's not having this device and he's working with testers.....
If calling and sms bother you so much, wait for a stable rom release.....
You can test this rom if you don't have any problem with the bugs....
jackeagle plz update us about d new news of rom.....
smart123123 said:
jackeagle plz update us about d new news of rom.....
Click to expand...
Click to collapse
smart123123 said:
Do you mean that calls nd messages are not working??? Nd tell me about other bug also....... plz...... u m having this device.......
---------- Post added at 12:08 PM ---------- Previous post was at 11:55 AM ----------
Will calls nd sms work on it nd should i install it or not....... nd is there any chance of bricking plz reply......
Click to expand...
Click to collapse
first of all please read OP everything is written there what is working and what is not working there is always a reason why we write in OP.
Installing rom is your choice i cant say whether u should or should.
Android Custom Rom's are tested well before release and usually Developers dont release something which can brick a device. In usual circumstances its the user who do not read OP and do not follow what is written in OP and thus end up bricking device. if everyone reads OP carefully nothing will happen and ofcourse you should have backup of everything including EFS.
Regarding update kindly do not ask for updates or status. I will surely provide all status whenever i feel all members should know
jackeagle said:
Reserved Last
Click to expand...
Click to collapse
Hi can you port or build ROM FOR GALAXY a800i
Please
Or can I port this cm ROM TO A800i
matrixex said:
Hi can you port or build ROM FOR GALAXY a800i
Please
Or can I port this cm ROM TO A800i
Click to expand...
Click to collapse
Samsung Galaxy A8 (a800I) is a Exynos based Device and I dont develop for Exynos based device.
No you cannot port this Rom to A800I because this rom is for Qualcomm based SOC which A700FD uses and your device uses Exynos which is different SOC.
jackeagle said:
Samsung Galaxy A8 (a800I) is a Exynos based Device and I dont develop for Exynos based device.
No you cannot port this Rom to A800I because this rom is for Qualcomm based SOC which A700FD uses and your device uses Exynos which is different SOC.
Click to expand...
Click to collapse
P
I already know it will not work because of different SoC
Please can you suggest a cm13 or marshmallow rom which I can port to my A800i having same SOC
New Build is Up!!!
Changelog in OP.
Download links are in OP.
Read OP Carefully
Enjoy!!
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is this?
This is CyanogenMod 12 (based on JustArchi/arter97) with many features from the well known CM12S/Cyanogen OS 12 and CM11S made for the OnePlus One. All Apps are successfully ported from CM11S for the i9300 Galaxy S3 and much more (read at features). The OnePlus One has a great Rom and why not giving the features to you all? That's the great reason why there is now CM12S for the S3.
The Rom has all features from Official CM12 and much more features are added, too.
I am only the Publisher of the CM12.1 based rom! Keep in note that Kevin210898 is the developer. I am helping him with support and more! So if you have probelms ask me. I have also contact to the dev.
For more Inforamtion about the Work and Devs and more visit the Official Google Plus Community!
Features:
- All CyanogenMod 12 features
- All CyanogenMod 12 optimizations by @JustArchi
- OnePlus One bootanimation
- OnePlus One wakeup and control feature ("Ok OnePlus")
- Quick Boot feature from OnePlus One (option is in developer options on your phone)
- All CM12S Apps (f.e Gallery, Camera, ...)
- ROM Update Notifier App
- New Wallpapers (made by the great team)
- much more
Screenshots:
MORE ARE COMING SOON!
How to install + Video Review (thanks to @Dimitrology)
https://youtu.be/BEfXxvHP7Ik
Bugs:
- please read last comments
Download Rom:
- Stable:
V 7.1
- BETA: V 5.0 [OLD!!]
Recommended GAPPS:
HERE
Alternative GAPPS:
HERE
For Changelog visit first Comment.
How To Install:
FROM OTHER ROMS
- Factory Reset/Wipe Data
- Format System
- Format Dalvik Cache
- Flash ROM
- Flash Gapps
- Reboot
UPDATE THIS ROM
Wipe cache, dalvik and flash the update.zip.
How to improve the battery:
- Try Calkilin Play Service Fix
- Flash NITRO X SPARK [dont know if it brings bugs
- Use your Kernel App
Other Information:
- Please refrain from talking about other kernels than stock. We can't track every kernel and it's problems, hence, you're using other kernels at your own risk. Please don't report bugs while you're using custom kernels. Only Kernel with help is stock and Boeffla Kernel Alpha 4 or newer!
- Official Google Plus Community for better support and help!
- TWRP Recovery is highly recommended for use! CWM is out of date and not made for Android 5.X
- This Rom gets every month one stable update with newest features, bug fixes and more improvements
- I don't allow you to publish direct download links to my Rom on other sides or threads! Always use the link of this xda thread somewhere else, no direct download link! (If you still need to make it, please talk with me before!!)
It is also NOT allowed to copy and paste my whole written text for this project on your/other websites!
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications,
and if you point the finger at me for messing up your device,
I will laugh at you. Hard. A lot.
Credit and Contribution:
- Kevin210898 for developing!
- ChariZardKs for the awesome banner!
- Google
- CyanogenMod
- JustArchi
- Moster2
- arter97
- @Dimitrology for the How to install and Video Review!
- OnePlus
- All of the awesome testers out there.
Please donate to me if you like my work by pressing the following button and I will give my best to continue it
-----------------------
More devices with CM12.XS:
- Galaxy S3 i9300
- Galaxy S2 i9100
- Galaxy S2 i9100G
XDA:DevDB Information
[5.1.1] [STABLE] Unofficial CyanogenOS 12.1S for i9300 Galaxy S3 [OTA Notifier], ROM for the Samsung Galaxy S III I9300
Contributors
FaserF, Kevin210898
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 7.1
Stable Release Date: 2015-11-18
Current Beta Version: 5.0 (Beta)
Beta Release Date: 2015-05-06
Created 2015-04-18
Last Updated 2016-05-18
Changelog:
V7.1 [Stable]
Final release
V7.0 [Stable] - 2015-10-26
- Rebased all in build 20
- Updated sources
- Probably some other misc things I fixed/improved in the meantime
- Add new app themer
- Readded all app
- Small Bug fixes
- better Stability
V 6.0 [Stable] - 2015-07-10
- Fixed (compass) and reintroduced open-source sensors
- Misc SELinux updates
- Misc hwcomposer fixes and improvements
- Updated sources
- Android 5.1.1 revision 6 (LMY48G)
- added bootanimation back
- more tweaks
- set COS Camera and Gallery to be default
- better battery management
- fixed Themes
- and more
V 5.1 [Stable] - 2015-06-11
- Wifi updates
- updated cm sources
- all features from Weekly 9
- added new Yureka Theme
- changed display name of CM
- improved speed
- many Bug fixes
Older Versions:
M2 (Snapshot) [Stable] - 2015-05-20
- Based on weekly 6
- fixed mobile networks search
- various kernel cleanups & stability improvements
- CM Source updates
- New OTA Updater (made by me @FaserF )
- removed Old OTA Updater
- Added true caller
- Added theme showcase
- perforamnce and battery improvements
- bug fixes
- more
V 5.0 [BETA] - 2015-05-06
- fixed some Bugs
- CM Source updates
- added OTA Support
- Twaks with Battery & Performance optimization
M1 (Snapshot) [Stable] - 2015-04-28
First Stable release! New updates will be for now only once a month!
- added Boeffla Kernel again
- added Boeffla Config App again
- added more tweaks
- improved whole stability (ram usage, performance, battery, RIL, etc)
V 4.0 (Build 7) [BETA] - 2015-04-27
It's Android 5.1.1 now!
- fixed Bootloop
- deleted some unneccessary Apps
- deleted Boeffla + Boeffla Config (becuase it caused a Bootloop)
- more improvements etc.
V 3.1 (Build 6) [BETA] - 2015-04-26
- added Voice wakeup from CyanogenOS 12 ("Ok OnePlus")
- added new Bootanimation with fix
- fixed CameraNext
- added new Quick Boot
- added Play Service fix
- added Boeffla Kernel
- added Boeffla Config App
- improved battery
- improved performance
V 3.0 (Build 5) [BETA] - 2015-04-23 CLEAN FLASH REQUIRED! You have to flash Gapps on your own.
Guys! It's Android 5.1.X now
V 2.0 (Build 4) [Stable] - 2015-04-22 FINAL!
DOWNLOAD LINK BROKEN, WAIT FOR V3.0! No sense to upload it again. V3.0 will be here soon!
This is the last update for CM12S, it should now have no Bugs left. CM12.1S [Android 5.1.1] is coming back Hope you like it!
- Added new Cyanogen OS 12 Theme
- Added Quick Boot feature from Cyanogen OS 12 for OnePlus One [Activate it by opening Developer Options -> Quick Boot]
- Added Boeffla Kernel as Main Kernel, use Boeffla Kernel (pre-installed) for modding etc.
- updated Gapps
V 1.2 (Build 3) [Stable] - 2015-04-19
NOW FIRST STABLE BUILD: Enjoy!
- New based Source: @arter97 unofficial nightly build (newest)
- modified framework-res
- updated gapps
- fixed camera bug
- fixed battery problem with Google Play Services
- now really deleted OTA App
- readded new Hexo Theme
- some Bug fixes
- more
V1.1 (Update for Build 1) [BETA] - 2015-04-18 - [YOU HAVE TO INSTALL BUILD 1 FIRST!]
- fixed panorama mode in camera
- added camera2
- deleted OTA Updater License for now, because of many bugs!
- fixed Theme Chooser
V1.0 (Build 1) [BETA] - 2015-04-15
Initial release with following features:
- deleted stock mail app
- added camera next
- added Boxer email
- added new Trebuchet Launcher
- added Gapps for Android 5.0
- added new terminal
- added new Sound Recorder
- added new screencast
- added Nextbit App
- added MaxAudiFX
- added new Clock
- added new Hexo Theme
- added galery Next
- added new CM Wallpaper
- added new CM Filemanager
- added SuperUser
- added Quickboot option
- fixed part of memory leak
Q&A:
Q: Can I dirty flash CM12.1S over CM12S/Unofficial CM12 or older versions?
A: No! You will get many many Force Closes, Bugs, and much more. Don't do this!
Q: How to get root access back or is this rom not rooted?
A: This rom is rooted, please enable Developer Options (Tap 7 times on build number in about phone), go to it and enable root access. You can enable there also the Quick Boot feature.
If you don't want to use CM's root access, please flash SuperSu in recovery.
Q: Rom installation/update failed, why?
A: TWRP Recovery is highly recommended for use! CWM is out of date and not made for Android 5.X! So try again with this Recovery. When it still does not work to UPDATE, try again with a Clean Flash!
Q: How do I get on-screen buttons with this rom/how can I activate them?
A: Open CM FileManager (pre installed on your device) and give it root access by opening options and choose mode from safe to root. Then go to /system and open build.prop, once it is opened got to the end and type in: qemu.hw.mainkeys=0
Q: My battery isn't that good and the phone laggs a bit.
A: See more at "How to improve Battery" in OP Thread.
Also make a clean flash with the newest version or try Boeffla Kernel. Don't forget the Boeffla Config App for better control etc!
Q: I am on CM12.1 based and want to switch to Nameless based (or the other way). Is a clean flash needed?
A: YES!
MORE ARE COMING SOON!
Sorry, but I am confused. You had beta2 for this rom, what happened to that? And why flash 1 & then 1.1,why can't it be one flashable file?
Thanks for your time and efforts
---------- Post added at 11:07 PM ---------- Previous post was at 11:04 PM ----------
Can we have feature list for release 1? [may be a detailed?]
TechEdge said:
Sorry, but I am confused. You had beta2 for this rom, what happened to that? And why flash 1 & then 1.1,why can't it be one flashable file?
Thanks for your time and efforts
---------- Post added at 11:07 PM ---------- Previous post was at 11:04 PM ----------
Can we have feature list for release 1? [may be a detailed?]
Click to expand...
Click to collapse
Ok, I will add the feature from release 1.
You have to flash Build one and after that V1.1 becaue this is only a small update, it was not necessary to build the whole new rom.
Beta 2 was from CM12.1S, this project is now dead and wont recieve updates, because the rom had many bugs and it was not possible to add all OnePlus One apps, because they were made for CM12 and not for CM12.1, this is why there is now this thread. Sorry, pretty annoying, I understand that.
EDIT: You can now see all added features in Build one, go to Changelog and show old versions.
I am a bit confused.
Is this rom just normal CM12 but with the CM12S apps,or a completely pure CM12S port?
The Marionette said:
I am a bit confused.
Is this rom just normal CM12 but with the CM12S apps,or a completely pure CM12S port?
Click to expand...
Click to collapse
This is CM12 with features, apps, bootanimation and more ported from CM12S.
read more at: "What is this".
I will try this
must install build 1
update 1.1
so no need flash gapps
Sent from my GT-I9300 using XDA Free mobile app
mcqaissi said:
I will try this
must install build 1
update 1.1
so no need flash gapps
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, first flash build 1, then flash 1.1
And no gapps are needed.
FaserF said:
Yes, first flash build 1, then flash 1.1
And no gapps are needed.
Click to expand...
Click to collapse
downloading
Sent from my GT-I9300 using XDA Free mobile app
tried clean flash
first boot my device restart three times
camera is crashed
GPS is working
have two themes pro
one works but it's empty
Another one is crashed
her some screen shots
network data is work
Sent from my GT-I9300 using XDA Free mobile app
this Link from alogcat
http://pastebin.com/NFu4FZmc
Sent from my GT-I9300 using XDA Free mobile app
mcqaissi said:
tried clean flash
first boot my device restart three times
camera is crashed
GPS is working
have two themes pro
one works but it's empty
Another one is crashed
her some screen shots
network data is work
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Confirmed....
camera creshed in normal mode. In panorama mode crashed too.
two themes apps. First app works but is empty. Second crashed.
and have still OTA updater app., but in changelog for build 1 update 1.1 should be deleted.
it seems that changelog for the whole update 1.1 for build 1 doesnt work or havent ben installed properly...
@FaserF what u mean with " added camera2"
Who.is said:
Confirmed....
camera creshed in normal mode. In panorama mode crashed too.
two themes apps. First app works but is empty. Second crashed.
and have still OTA updater app., but in changelog for build 1 update 1.1 should be deleted.
it seems that changelog for the whole update 1.1 for build 1 doesnt work or havent ben installed properly...
@FaserF what u mean with " added camera2"
Click to expand...
Click to collapse
mcqaissi said:
tried clean flash
first boot my device restart three times
camera is crashed
GPS is working
have two themes pro
one works but it's empty
Another one is crashed
her some screen shots
network data is work
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
We are currently working on a Bug fix for Camera. Try to use Google Camera instead until we publish the Update.
Have you installed the Build 2 1.1 update? It seems that you have not, because in this build OTA was deleted, in Build 1 it is inside.
One Theme has to be empty because this is the default theme. The other One should be a OnePlus One theme, should work in next builds.
Panorama mode should be fixed in newest update.
As I can see that there are many Problems with the Update we will publish for now only whole updates with whole Rom, not these small ones anymore.
Added Camera2 means the new Camera with fixes.
Thanks for logcat and the answers!
@mcqaissi Can I use your Screenshots in the OP Thread Section?
FaserF said:
We are currently working on a Bug fix for Camera. Try to use Google Camera instead until we publish the Update.
Have you installed the Build 2 1.1 update? It seems that you have not, because in this build OTA was deleted, in Build 1 it is inside.
One Theme has to be empty because this is the default theme. The other One should be a OnePlus One theme, should work in next builds.
Panorama mode should be fixed in newest update.
As I can see that there are many Problems with the Update we will publish for now only whole updates with whole Rom, not these small ones anymore.
Added Camera2 means the new Camera with fixes.
Thanks for logcat and the answers!
@mcqaissi Can I use your Screenshots in the OP Thread Section?
Click to expand...
Click to collapse
Yes, first build 1, then update 1.1 build 2 and then super su. Gaps are included in build 1 so no need to install
Sent from my Oneplus One using XDA Free mobile app
New Update is ready to download, download link is in the OP Thread!
FaserF said:
Changelog:
To Do List/New features in next updates:
- Add Quick Boot feature from Cyanogen OS 12 for OnePlus One [Activate it by opening Developer Options -> Quick Boot]
- fixing all Problems with the Camera - use Google Camera for now
V 1.2 - 2015-04-19
- modified framework-res
- updated gapps
- fixed battery problem with Google Play Services
- now really deleted OTA App
- readded new Hexo Theme
- some Bug fixes
- more
Click to expand...
Click to collapse
Download link for 1.2v is broken.
Jeffero said:
Download link for 1.2v is broken.
Click to expand...
Click to collapse
Works for me.
The Marionette said:
Works for me.
Click to expand...
Click to collapse
Says website unavaiable for me .
Jeffero said:
Says website unavaiable for me .
Click to expand...
Click to collapse
Doesnt work for me either now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is this?
This is CyanogenMod 12.1 (based on Lysergic Acid CM12.1) with many features from the well known CM12.1S/Cyanogen OS 12.1 and CM11S made for the OnePlus One. All Apps are successfully ported from CM12S for the i9100 Galaxy S2, Quick Boot funktion is working very well and much more (read at features). The OnePlus One has a great Rom and why not giving the features to you all? That's the great reason why there is now CM12.1S for the S2.
The Rom has all features from Official CM12.1 and much more features are added, too.
I am the Maintainer and Developer of this Rom, but my work is based on Unofficial CyanogenMod 12.1 from Lysergic Acid
For more Inforamtion about the Rom visit the Official Google Plus Community!
Features:
- All CyanogenMod 12 features (and RR features)
- All CyanogenMod 12 optimizations by Lysergic Acid
- OnePlus One bootanimation
- Added Quick Boot feature from Cyanogen OS 12 for OnePlus One [Activate it by opening Developer Options -> Quick Boot]
- All CM12S Apps (f.e Gallery, Camera, ...)
- Full CyanogenOS 12 UI (activate it at Theme App)
- New Wallpapers (made by the great team)
- Build.prop tweaks
- ROM Update Notifier
- much more
Screenshots:
Bugs:
- Panorama Mode in Camera app doesn't work most time, use Google Camera for this instead fixed since V3.0 Beta
- Screencast doesnt work - fixed since V4.0 - sorry Bug is back
- CM Theme Store doesn't work fixed since M1
Maybe more, you have to tell me!
Download Stable Rom Download Part 1 AND Part 2, flash both!
Experimental test build (based on OFficial Nightly)
Recommended GAPPS:
HERE (take Aroma or Pico)
Alternative GAPPS:
HERE
For Changelog visit first Comment.
How To Install:
FROM OTHER ROMS
- Factory Reset/Wipe Data
- Format System
- Format Cache
- Format Dalvik Cache
- Flash ROM
- Flash Gapps
- Reboot
UPDATE THIS ROM
Wipe cache, dalvik and flash the update.zip.
How to improve the battery:
- Try Calkilin Play Service Fix
- Flash NITRO X SPARK [dont know if it brings bugs
- Use your Kernel Config App to improve battery (I can help you with this!)
More are coming as soon as I know more
Other Information:
- Please refrain from talking about other kernels than stock. We can't track every kernel and it's problems, hence, you're using other kernels at your own risk. Please don't report bugs while you're using custom kernels.
- At the moment, this project is considered: STABLE. All core functions should work, ROM shouldn't have any critical issues, and it should work as daily driver.
- Official Google Plus Community for better support and help!
- I don't allow you to publish direct download links to my Rom on other sides or threads! Always use the link of this xda thread somewhere else, no direct download link! (If you still need to make it, please talk with me before!!)
It is also NOT allowed to copy and paste my whole written text for this project on your/other websites!
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications,
and if you point the finger at me for messing up your device,
I will laugh at you. Hard. A lot.
Credit and Contribution:
- Kevin210898 for the idea of porting and porting it to some other devices you can see at the G+ Community
- ChariZardKs for the awesome banner!
- Google
- CyanogenMod
- Lysergic Acid
- OnePlus
- All of the awesome testers out there.
Please donate to me if you like my work by pressing the following button and I will give my best to continue it
-----------------------
More devices with CM12.XS:
- Galaxy S3 i9300
- Galaxy S2 i9100
- Galaxy S2 i9100G
XDA:DevDB Information
[5.1.1][STABLE] Unofficial CyanogenOS 12.1S for i9100 Galaxy S2 [Abandoned], ROM for the Samsung Galaxy S II
Contributors
FaserF
Source Code: http://www.github.com/CyanogenMod
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: M2 (Snapshot)
Stable Release Date: 2015-08-14
Current Beta Version: Experimental
Beta Release Date: 2015-07-10
Created 2015-04-22
Last Updated 2015-12-28
Changelog:
Final release (Stable) - work in progress, release in December
- bug fixes
- all new CyanogenMod 12 goodies
- generally system stability increasement
- updated cos apps
- some more improvements are planned
M2 (Snapshot) [Stable] - 2015-08-14
- Added Cyanogen OS 12 Per App Themer!
- now based on official cm12.1 nightlies
- fixed Themes (Hexo and Yu)
- removed some more apps, as we need more free system space
- bug fixes and stability improvements
- LockClock is back
- updated Rom update notifier
- updated Truecaller
- added Screencast again
- fixed some bugs in CyanogenThemeChooser
- Screencast is now working!
- many many many more!
M1.1 (Stable Update) - 2015-05-29
- RIL Bug fixes
- cleaned up Updater-Script
- added COS12 YU Theme
- deleted LockClock, to get more free space
- deleted the rest of CM Updater
- Trebuchet bug fixes
- updated Rom Update Notifier to V1.4
- quick boot bug fixes
M1 (Snapshot) [Stable] - 2015-05-26
- Source updates
- deleted Screencast for now (will come back later on)
- fixed ThemeStore
- new bootanimation
- resized Bootanimtion to fit to s2 size
- deleted some apps
- bug fixes
- new CM ThemeShowcase
- MaxxAudioFX Bug fixes
- CameraNext force close bug fixes
- source updates
- added Ambient Core (COS Account manager)
- deleted CM Account Manager
- updated Trebuchet
- updated CMFileManager
- updated Wallpapers
- added Face Lock
- updated Hexo Theme
- added Theme Chooser
- added Wallpaper Cropper
- Rom Update Notifier Bug fixes
- improved battery
- improved performance
- new build.prop tweaks
- updated Nextbit
- some NextCamera fixes like Panorama again
- more
Older Versions:
V 3.0 [BETA] - 2015-05-11
- Updated ROM Update Notifier to Version 1.3
- CM source updates
- old CWM Recovery is back!
- fixed CameraNext Panorama force closes
- updated CameraNext to V2.0.004
- added CM Theme Showcase
- improved battery
- improved performance
- Launcher crashing fixed
V 2.0 [BETA] - 2015-05-05
!It's Android 5.1.1 now!
- CyanogenMod source updates
- fixed Bootanimation
- (hopefully) fixed screencast
- many Bug fixes and improvements
- deleted unnecessary apps, like stock camera, stock FileManager etc and added Oneplus One apps instead
- fixed "failed to install cm theme"
- added ROM Update Notifier V1.1 (made by me @FaserF)
- added Google Connectivity Service
- many build.prop tweaks -> improved battery, performance, ram usage and more:
All build.prop tweaks:
- improved 3G speed
- improved RIL speed
- improved boot time
- camera quality to max
- set camera picture quality to 100%
- improved performance
- improved battery
- improved internet speed
- deleted CellBroadcastReciever (because problems with o2 users like me)
- more
V 1.0 [BETA] - 2015-04-23!
Initial release of CM12.1S
- Source based on Unofficial CM12.1
-Added new Camera Next
- Added Boxer Email
- Added newest Trebuchet
- Added
- Added new Terminal App
- Added new Sound Recorder
- Added new Screencast
- Added NextBit App
- Added MaxAudioFX
- Added new Lockscreen Clock
- Added new Hexo Theme
- Added New Gallery
- Added new Wallpaper made by our awesome Community
- Added newest CM Filemanager
- Added SuperUser
- Added Quick Boot feature from Cyanogen OS 12 for OnePlus One [Activate it by opening Developer Options -> Quick Boot]
- Added New Theme made by @Kevin210898
- Fixed Some Memory Leaks
Q&A:
Q: I cant flash this rom, my internal memory / Sytsem partition is too small.
A: Please increasy your system partition first, here is a good guide
Q: Can I dirty flash CM12.1S over Unofficial CM12, CM11 older versions or other Roms?
A: No! You will get many many Force Closes, Bugs, and much more. Don't do this!
Q: Why do I have to flash two parts of this rom to get one rom?
A: Since M2 my rom is based on official cm nightlies, and on official cm nightlies the folders inside /system are hide (not able to edit). Part 1 is mainly the rom and part 2 is the /system folder for this rom.
Q: How to get root access back or is this rom not rooted?
A: This rom is rooted, please enable Developer Options (Tap 7 times on build number in about phone), go to it and enable root access. You can enable there also the Quick Boot feature.
If you don't want to use CM's root access, please flash SuperSu in recovery.
Q: Rom installation/update failed, why?
A: TWRP Recovery is highly recommended for use! CWM is out of date and not made for Android 5.X! So try again with this Recovery by flashing the Kernel after the Rom. When it still does not work to UPDATE, try again with a Clean Flash!
---> Q: How to get TWRP on i9100 S2
---> A: Please download twrp-recovery-flashable.zip from download section and flash it on your device
Q: How do I get on-screen buttons with this rom/how can I activate them?
A: Open CM FileManager (pre installed on your device) and give it root access by opening options and choose mode from safe to root. Then go to /system and open build.prop, once it is opened got to the end and type in: qemu.hw.mainkeys=0
Q: My battery isn't that good and the phone laggs a bit.
A: See more at "How to improve Battery" in OP Thread.
Q: I want to test the RR based build, where is it?`
A: It was moved to the "Other" Folder in GDrive.
More are Coming Soon!
This is a joke?No screenshots or anything? just show a screenshot.
GreekDragon said:
This is a joke?No screenshots or anything? just show a screenshot.
Click to expand...
Click to collapse
This Rom will be release tomorrow! Please be patient and wait for it until tomorrow. Screenshots are coming soon. Sorry. But I have written many times that it is coming soon.
FaserF said:
First release will be tomorrow!
Version Information
Status: Beta
Current Beta Version: COMING SOON
Click to expand...
Click to collapse
One question. is very stable? there is a video playback issues or any annoying issue?
GreekDragon said:
One question. is very stable? there is a video playback issues or any annoying issue?
Click to expand...
Click to collapse
Rom is in progress. As it is based on CyanogenMod 12.1 it will have some issues.
I can't say which issues it has, I have to test and also I need testers. We will see more by tomorrow. Stay tuned.
But I can say it should be pretty stable and has no nasty or annoying bugs. But keep in mind: First release is BETA. Hope to get a stable version soon
FaserF said:
Other Information:
- Please refrain from talking about other kernels than stock. We can't track every kernel and it's problems, hence, you're using other kernels at your own risk. Please don't report bugs while you're using custom kernels. Only Kernel with help is stock and Apollo Kernel Version 8 Beta 9 or newer!
- At the moment, this project is considered: BETA. All core functions should work, ROM shouldn't have any critical issues, but it's still not ready to mark as stable. However, it should work properly as daily driver.
Click to expand...
Click to collapse
Waiting for it ...thanx :good:
i'm really sure saw JustArchi optimization feature 10 min ago
dokuzcanlicanavar said:
i'm really sure saw JustArchi optimization feature 10 min ago
Click to expand...
Click to collapse
Yeah I thought I was at my Galaxy S3 thread and put in the wrong person now everything is correct.
QR Code reading?
@FaserF
Is qr-code reading working properly (for whats app web etc.)?
otti17 said:
@FaserF
Is qr-code reading working properly (for whats app web etc.)?
Click to expand...
Click to collapse
Yeah no problem there. When there should be Problems use Google Camera. This rom contains CM OnePlus One Camera, and maybe has some bugs in first versions.
kernel.
I have the cyangon 3.0.64-cm-g526d694, build to kernel. Will this work with cm12 OK or do you suggest an alternative? Thanks in advance
jimbomodder said:
I have the cyangon 3.0.64-cm-g526d694, build to kernel. Will this work with cm12 OK or do you suggest an alternative? Thanks in advance
Click to expand...
Click to collapse
This Rom will come with Apollo Kernel and the Config App pre installed. I think this is the best for our great i9100.
Wait until tomorrow. Then you can test the rom with Apollo Kernel.
But I don't understand your question, what do you mean with will the cyangon 3.0.64-cm-g526d694 kernel work? This is the kernel of your current rom.
Every rom brings is own (maybe sometimes similar) Kernel.
When you are on unofficial CM12 you will have to do a clean flash with this rom.
[JQUOTE=FaserF;60287892]This Rom will come with Apollo Kernel and the Config App pre installed. I think this is the best for our great i9100.
Wait until tomorrow. Then you can test the rom with Apollo Kernel.
But I don't understand your question, what do you mean with will the cyangon 3.0.64-cm-g526d694 kernel work? This is the kernel of your current rom.
Every rom brings is own (maybe sometimes similar) Kernel.
When you are on unofficial CM12 you will have to do a clean flash with this rom.[/QUOTE]
Sorry auto correct. I meant its build02. I'm pretty sure it can with my ROM as currently I running cm11 snapshot but not the latest version as had issues with that one. My real question is, does the ROM come with the kernel and gapps included?
subscribe
f2fs supported?
---------- Post added at 01:39 AM ---------- Previous post was at 01:34 AM ----------
download link not working
Waiting for the download links, hope to get them soon.
Will it be stable than lysergic acid version?
I am facing atleast one force reboot a day in that version.
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
Neo.RUS said:
f2fs supported?
---------- Post added at 01:39 AM ---------- Previous post was at 01:34 AM ----------
download link not working
Click to expand...
Click to collapse
Download links are not yet published. Keep waiting.
tHeKinGmaKEr said:
Will it be stable than lysergic acid version?
I am facing atleast one force reboot a day in that version.
Click to expand...
Click to collapse
Should be the same in terms of stability.
---------- Post added at 03:41 PM ---------- Previous post was at 03:37 PM ----------
Neo.RUS said:
f2fs supported?
Click to expand...
Click to collapse
Sorry, no F2FS support on the s2.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 12.1 for Samsung Galaxy J5 built from source
DISCLAIMER
Code:
Your warranty is now void.
I'm not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired, because the alarm app failed. Please
do some research if you have any concerns about features included
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
--------------------------------------------------------------------------
Bugs and changelogs are in 2nd post !
--------------------------------------------------------------------------
Real Battery Life Calculations
Talk Time: Aprox. 18 hours (3G)
Music Playback: Aprox. 62 hours
Video Playback: Aprox. 13 hours
Screen On Time (Idle CPU): Aprox. 20 hours
Screen On Time (Full load CPU): Aprox. 6-8 hours (user-dependent)
Deep Sleep only: Aprox. 70 hours
--------------------------------------------------------------------------
Installation
1. Make sure you have updated to stock 5.1.1.
2. Download the ROM from the direct link for your device in the Downloads section below.
3. Download 5.1.1 ARM GAPPS.
4. Transfer the zip files to your SD card.
5. Reboot to recovery mode. ( Vol UP + Home + Power )
Note: It is highly recommended to use TWRP Recovery
6. Optional: Do nandroid backup.
7. Full wipe /system, /internalsd, /data, /cache, as well as the Android folder from your external SD.
Note: You will have to format data as well if you want to use data encryption
8. Install CM zip and GApps zip.
9. Reboot to system.
10. Setup your device.
Enjoy!
------------------------------------------------------------------
Downloads
SM-J500FN
SM-J500F
SM-J500G
SM-J500M
SM-J500H
SM-J500Y
SM-J5008
SM-J5007
------------------------------------------------------------------
SourceCheck out the ROM Source available on GitHub.
Feel free to submit any fixes, Just remember to give proper credits when using other people's source.
Kernel Source
---------------------------------------------------------------------------------------------------------------------------------------
Credits
@jackeagle for kernel maintaining.
@TheWisp for the awesome InputDisabler.
@aapav01
@ganesh varma for helping when development needed support.
And last the awesome J500H testing team we have in Hangouts, for being there all this time.
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy J5
Contributors
Nick Verse, ganesh varma, #Henkate
Source Code: https://github.com/Galaxy-J5
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Lollipop Modem/Baseband
Version Information
Status: Stable
Current Stable Version: 4.0.0
Stable Release Date: 2016-09-23
Created 2016-09-25
Last Updated 2017-04-29
Bugs and Issues
Code:
- No audio through FM Radio.
Let me know if you find other bugs!
--------------------------------------------------------------------------------------------------------------------------------------------
Submitting Bug Reports:
If you find some bugs, report it with logs and detailed information of the issue.
Do not report bugs if custom tweak is done.
Do not report bugs if Xposed is installed!
---------------------------------------------------------------------------------------------------------------------------------------------
Changelog:
Code:
[B]October 11, 2016[/B]
- Final build.
- Fixed all issues with GPS and Wi-Fi.
- Added new frequencies that Samsung had not included for CPU. (200MHz-1401MHz)
- Kernel stability updates.
- Audio low-latency porting to CM.
- Audio FX made the right way. (Audio is loud and crispy now)
- Abandoning FM project to work for CM13. (No audio)
- Merged with latest CM Changes.
[B]September 28, 2016[/B]
- Fixed lagging issues.
- Imported SIP/voIP connection features into ROM. (Needs testing)
- Enabled DSP audio processing by default.
- Disabled GPS logging that was ovehauling our logcats.
[B]September 23, 2016[/B]
- Fixed reboot issues.
- Fixed lags from not needed libraries and kernel commits.
- Fix rmnet (data) issues.
- Dalvik/ART optimizations.
- Removed extra governors/io schedulers.
(The provided governors in OC kernels for J5 are for Exynos devices,
so they need extra configuration to be adapted to Snapdragon devices.
Until then, we will use the stock and trusted ones,
but keep overclocking to be enabled by a userspace application).
- Many kernel fixes.
- Framework fixes.
- Audio enhancements.
- Added audio echo cancellation support (AEC) for in-calling audio.
- Added Wifi-Direct and Screen Cast/HDMI support in kernel. (Needs testing)
- Added Volume wake and Home button wake support.
(You can enable/disable these features from Settings->Buttons)
- Merged with latest CM Changes.
[B]September 8, 2016[/B]
- Removed On-Screen-Buttons implementation.
(Currently we don't have an implementation for hard disabling touch-keys in kernel.)
- Kernel fixes.
- Attempt to fix reboot issues and data problems for [B]G[/B] and [B]H[/B] variant.
- Removed KernelAdiutor
[B]September 2, 2016[/B]
- Added OC in kernel and fixes for frequency ladder. (0.2 to 1.8 GHz)
- Added a lot of governors and I/O schedulers.
- Added KernelAdiutor as a built-in application for tweaking parameters.
- Added DayDream support by default.
(It is a screensaver feature for Android.
You can choose your preference in Settings -> Display & lights -> DayDream)
- PowerHAL fixes.
- Disabled compression of camera images, set quality of Encoder to 100% and increase memCap *4.
(Image sizes are larger, and have better quality)
- Added On-Screen-Buttons implementation similar to qemu.hw.mainkeys=1.
(You can use software keys for Back/Menu/Options, by enabling it on the first setup screen.
Main keys will be permanently disabled)
- Merged with latest CM Changes.
[B]August 20, 2016[/B]
- Excluded InputDisabler from build. (Not needed from now on as we found the root of the cause)
- Screen on/off lag reduction. (WIP)
- Fixed SD Card issues and corresponding folder creations on boot.
- Added option to secure unmount external SD before removal.
- Added option to record in-call voice for all regions.
- CPU speed/responsiveness optimizations.
- SELinux denial fixes for other variants too.
- Switched to SELinux enforcing, minized kernel messages and ADB secure (needs su command from now on).
- Optimized latency for audio HAL. No drop-outs from now on.
- Audio effect optimizations. Sound is more crisp.
- Excluded zRAM.
(zRAM caused not needed CPU overhead and heat issues when on Full Brightness+Mobile Data+GPS)
- TWRP bug-fixes.
- Kernel fixes.
- Merged with latest CM Changes.
- Updated stable release name to 2.0.0
[B]July 22, 2016[/B]
- Fixed small freeze on screen unlock.
- Fixed Auto Display Color Calibration.
- Disabled Auto Brightness feature. (No light sensor for J5)
- Raised the perceived loudness by 4db on headphones, and 4db on speaker output.
- Fixed audio minor drop-outs when exiting deep sleep.
- Fixed some firmware link typos.
- Enabled zRAM. (512MB)
- Merged with latest CM Changes.
[B]July 15, 2016[/B]
- Fixed NFC.
- Fixed Keymaster firmware detection.
- Merged with latest CM Changes.
[B]July 14, 2016[/B]
- Fixed moving apps to external SD.
- Added option to choose the default install location of applications in Settings.
- Optimized haptic feedback.
- Fixed front flash camera latency.
- Merged with latest CM Changes.
[B]
June 23, 2016[/B]
- Optimized CPU usage.
- Fixed SELinux Denials.
- Fixed audio latency and quality.
- Fixed QR Scanner display errors and camera related problems.
- Kernel updates.
- Merged with latest CM Changes.
--------------------------------------------------------------------------------------------------------------------------------------------------
Tips :
To activate Developer settings : Settings -> About phone -> press Build number 7 times.
To activate 3-way reboot go to Developer settings and select "Advanced reboot".
Root is included and disabled by default, enable it from Developer settings - Root access.
BusyBox is included.
LiveDisplay is a feature for adapting display colors for night usage.
You can enable it by turning on GPS and data/wifi for some seconds.
Then go to Settings -> Display & lights -> LiveDisplay -> Display mode and change from off to automatic.
Then your phone will know when to adjust your display for night usage through your local GMT zone.
You can also adjust Color Temperature for Day/Night modes.
Screen Cast is a feature to cast your screen to a Smart TV.
Enable Wi-Fi and check Settings->Display & lights->Cast screen->Enable wireless display, connect both devices, and play!
Multi Window Support - J500F
Hi @Nick Verse
First of all, Thank You so much for this awesome rom..
I just have one request..
I'm using J500F (Indian Version)..
Can you add Multi Window Support in the next release of this rom for J500F..??
Thanks in advance..
Just use CM13... lol
Cm 13 is not yet stable, fully working. And dont try to undermine other peoples work.
Hi there
Who can help me to understand and solve the following situation: i want to add spelling romanian language to stock cm12.1 keyboard. Romanian language is available only just as language, for entire operation system, not for spelling purposes (is not in the spelling languages list when i try to add it). So, how can i add it whitout installing another app like Google Keyboard? Is possible?
I use Nicke Verse CM12.1 version from 15.07 on a J500FN.
Best!
y-c-s said:
Hi there
Who can help me to understand and solve the following situation: i want to add spelling romanian language to stock cm12.1 keyboard. Romanian language is available only just as language, for entire operation system, not for spelling purposes (is not in the spelling languages list when i try to add it). So, how can i add it whitout installing another app like Google Keyboard? Is possible?
I use Nicke Verse CM12.1 version from 15.07 on a J500FN.
Best!
Click to expand...
Click to collapse
Propably CyanogenMod official developers didn't add the spelling feature for Romanian language in the official repository! You can contribute in GitHub on your own if you want, or PM a Developer!
abhijeet1331 said:
Hi @Nick Verse
First of all, Thank You so much for this awesome rom..
I just have one request..
I'm using J500F (Indian Version)..
Can you add Multi Window Support in the next release of this rom for J500F..??
Thanks in advance..
Click to expand...
Click to collapse
Multi-Window support uses Android API 24, which means you will have to wait for Android 7.0!
Nick Verse said:
Multi-Window support uses Android API 24, which means you will have to wait for Android 7.0!
Click to expand...
Click to collapse
Which most likely will never come from Samsung.
Sent from my SM-J500F using Tapatalk
punmeister said:
Which most likely will never come from Samsung.
Sent from my SM-J500F using Tapatalk
Click to expand...
Click to collapse
Yes! But we'll do something if we can
magix01 said:
Cm 13 is not yet stable, fully working. And dont try to undermine other peoples work.
Click to expand...
Click to collapse
I was referring to adding multi-window support... because it's kinda buggy if implemented on Lollipop...
I never undermine anyone's work and am currently using Nick Verse's CM12...
Sorry for the misunderstanding...
Nick Verse said:
Multi-Window support uses Android API 24, which means you will have to wait for Android 7.0!
Click to expand...
Click to collapse
Okay.. Thanks..
When will the download links be available?
Sent from my Galaxy j5 using Tapatalk
Very soon
Sent from my SM-J500H using Tapatalk
ayamati said:
Just use CM13... lol
Click to expand...
Click to collapse
please don't mess the thread by giving unnecessary suggestions.
Aasis34 said:
please don't mess the thread by giving unnecessary suggestions.
Click to expand...
Click to collapse
It was a relevant answer to the multi-window question. I don't mess anything.
Updated [Downloads Tab]
Updated SM-J500FN. Next is SM-J500F. Download links will be in the downloads tab from now on.
Audio Latency
We have noticed some longer than usual audio delays a long time ago in CM builds from source.
The main concept is to make the builds as fast responding as possible.
- Currently the audio.primary.msm8916 module is a proprietary blob, because without it in-call audio breaks. (related to proprietary Samsung RIL blobs)
- Disabled AUDIO_OUTPUT_FLAG_FAST, as it is constantly denied in logs even when set in native 44100 sampling rate.
Sources:
https://github.com/Galaxy-J5/android_device_samsung_j5-common
If anyone is familiar with building sources and is aware of the issue, please contact me.
Updated [Downloads Tab]
Updated SM-J500F
@Nick Verse
Thank you for your awesome work!
I think I'll test the new version later.
By the way, I think you should mention in OP how to download, because some people use the old XDA theme (2010), including me (but I know how to download) and they can't see the project tabs unless they switch to at least 2013 theme.
EDIT:
@Nick Verse : When you go to downloads tab, there is download link. You can put it in OP as direct download link, but people will still have to switch to at least 2013 theme. Maybe you can put the link of downloads tab too. It's your choice
PS: limited to thanks button -_-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Introduction
Resurrection Remix the ROM has been based on LineageOS ,slim.omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
Bugs
What's working:
almost everything.
What's not working:
same as LineageOS 14.1.
Fingerprint Sensor (impossible unless we get source codes from Validity/Synaptics and HTC)
NFC HCE (lack of sources of NXP chipset)
Installation instructions
First time flashing RR Nougat your device?
Coming from a SENSE ROM?
Enable all location services: Settings > Location > (all location services) = On
Coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash RR.
Optional: Install the Google Apps addon package.
Supported models:
t6: t6ul, t6spr, t6vzw, t6tl(HTC_8088)
t6d: t6dwg(HTC_809D), t6dug(HTC_8060)
Downloads
Recovery : Official TWRP
Gapps : Open Gapps (choose Arm, 7.1, pico)
Rom : Download
Sources
msm8960-common device tree: msm8960-common
t6-common device tree: t6-common
t6 device tree: t6
t6d device tree: t6d
msm8960 kernel tree: msm8960 kernel
htc vendor tree: vendor tree
Big Thanks
LineageOS Team.
RR Team.
@Flyhalf205 for device tree and kernel.
XDA:DevDB Information
RR Nougat for One Max, ROM for the HTC One Max
Contributors
tarkzim, Flyhalf205
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS, Resurrection Remix
Version Information
Status: Stable
Beta Release Date: 2016-12-04
Created 2016-11-29
Last Updated 2017-04-25
Changelogs
2017/10/08
sync upstream updates and fixes.
updated to RR 5.8.5 (Final Nougat build)
updated to Android 7.1.2_r29 with October Security Patches.
t6:
nothing major.
t6d:
none.
2017/09/12
sync upstream updates and fixes.
support ZRAM for more cache memory.
no more built-in Magisk, you have to flash it manually.
if anyone using dual sim variant, test this build and let me know, thanks.
t6:
add missing modem links.
t6d:
add missing modem links.
2017/08/21 (only for t6, t6d suspended)
sync upstream updates and fixes.
kernel security patches.
you might see fingerprint options on settings but it will not work, still trying to make it work.
t6:
None.
t6d:
None.
2017/08/08 (only for t6, t6d suspended)
sync upstream updates and fixes.
updated to Android 7.1.2_r29 with August Security Patches.
updated to RR 5.8.4.
t6:
None.
t6d:
None.
Older changelogs:
2017/07/29
sync upstream updates and fixes.
updated to Magisk 13.3 Stable (updated to proper version)
t6:
None.
t6d:
build kernel sources for dual sim variant, but RIL/NFC not working for now.
2017/07/22
t6:
sync upstream updates and fixes.
updated to Magisk 13.3 Stable
(BETA) minor changes for SPRINT variant.
t6d: NONE.
2017/07/13 (sprint or verizon please test it for your device and see if RIL works properly)
sync upstream updates and fixes.
updated to Magisk 13.1 Stable
(BETA) unified all Single-SIM variants into one zip : t6, Dual-SIM variants into one zip : t6d
(BETA) supports t6tl(HTC_8088 China Variant), t6ul(HTC_8160 China Variant), t6dwg(HTC_809D Dual Sim Variant), t6dug(HTC_8060 Dual Sim Variant)
2017/07/07
sync upstream updates and fixes.
updated to Android 7.1.2_r24 with July Security Patches.
t6spr: set default prop to fix network.
2017/06/25
sync upstream updates and fixes.
updated to Android 7.1.2_r17 with June Security Patches.
many security patches on kernel.
2017/05/12
sync upstream updates and fixes.
updated to Android 7.1.2_r8 with May Security Patches.
added missing config file for Sense Camera, you can now adjusting ISO or Recording resolutions and other settings.
build with original trees, no more experimental changes.
(Test failed)
2017/05/03 (for Testing only)
sync upstream updates and fixes.
updated to Android 7.1.2_r8 with May Security Patches.
some WiFi changes, Audio-playback/Audio-recording changes. attempt to fix random reboot.
DOWNLOAD HERE
Please test it and report back, especially for audio related functions and let me know if it fixed random reboots.
2017/04/15 (clean flash recommended)
sync upstream updates and fixes.
updated to Android 7.1.2_r2 with April Security Patches.
updated to RR 5.8.3, many RR updates.
2017/03/27
revert NFC host-based feature to fix crashes.
2017/03/20
sync upstream updates and fixes.
updated to Android 7.1.1_r25 with March Security Patches.
support NFC host-based feature and other fixes.
2017/03/02 (clean flash recommended)
sync upstream updates and fixes.
updated to Android 7.1.1_r21 with February Security Patches.
updated to RR 5.8.2
2017/02/17 (fixed ril and reuploaded)
sync upstream updates and fixes.
(BETA) signal-strength fixed, now it reads real values and showing icon correctly on status bar.
2017/01/31 (clean flash recommended)
sync upstream updates and fixes.
updated to RR 5.8.1 with OMS support.
2017/01/29
sync upstream updates and fixes.
stock Camera recorder working now.
minor fixes.
2017/01/25 - Recovery only
build twrp-3.0.3-0, Download
2017/01/17
sync upstream updates and fixes.
* Camera recorder might not work on stock camera app, use Google Camera from Play Store instead.
2017/01/09
updated to Android 7.1.1_r09 with January Security Patches.
sync upstream updates and fixes.
* Camera recorder might not work on stock camera app, use Google Camera from Play Store instead.
2017/01/08 (clean flash recommended)
updated to Android 7.1.1_r06. (January Security Patch not merged yet, would included on next build)
basing on latest LineageOS device / kernel trees.
kernel updated to v3.4.113.
sync upstream updates and fixes.
* Camera recorder might not work on stock camera app, use Google Camera from Play Store instead.
2016/12/09
hotfix for tethering(Hotspot) bug.
2016/12/08
updated to Android 7.1.1_r04 with December Security Patches.
sync upstream updates and fixes.
2016/12/04
sync upstream updates and fixes.
using CyanogenMod official common device tree for now, including GPS and other minor fixes so i think it's stable.
2016/11/30
initial build RR 5.8.0 for t6, t6vzw, t6spr.
Reserved
Screenshots
I think this not for sprint
ahenger said:
I think this not for sprint
Click to expand...
Click to collapse
sure, it's only for gsm variant for now, i may build it for Verizon and Sprint variants in future, sorry [emoji13]
thanks
tarkzim said:
sure, it's only for gsm variant for now, i may build it for Verizon and Sprint variants in future, sorry [emoji13]
Click to expand...
Click to collapse
ok bro I wait for sprint
ahenger said:
ok bro I wait for sprint
Click to expand...
Click to collapse
i have uploaded spr and vzw build, test it and report back pls
I'll gonna try this today and get back to you soon @tarkzim
Nice to see alternative rom for t6 device. Kudos
installing
tarkzim said:
i have uploaded spr and vzw build, test it and report back pls
Click to expand...
Click to collapse
Thanks for your work about sprint; I installed remix system is wonderful; but phone network is off.
ahenger said:
Thanks for your work about sprint; I installed remix system is wonderful; but phone network is off.
Click to expand...
Click to collapse
i'm afraid that i can't help you on this because my max is international variant, i think @Flyhalf205 may know something about it.
Great. Still having a play around with it. But i like it. Not quite used to CM roms at the moment but there growing on me fast.
Thanks
@tarkzim can't find the menu or tweaks for power menu I want to add Screenshot in the power button, CM 14 has it on the menu (Settings/Buttons/Power menu)
Overall the Rom is rock solid, So far I haven't experienced random reboot for 5 hours exploring on this build. Gonna deep more
ahenger said:
Thanks for your work about sprint; I installed remix system is wonderful; but phone network is off.
Click to expand...
Click to collapse
If you have sprint service. Anything on nougat will not work yet. If you running GSM on sprint then edit your build.prop. find and delete line telephony.lteOnCdmaDevice=1
Sent from my HTC6535LVW using Tapatalk
safety1st said:
@tarkzim can't find the menu or tweaks for power menu I want to add Screenshot in the power button, CM 14 has it on the menu (Settings/Buttons/Power menu)
Overall the Rom is rock solid, So far I haven't experienced random reboot for 5 hours exploring on this build. Gonna deep more
Click to expand...
Click to collapse
you can find it on Settings > (RR)Configurations > Buttons > Power menu to set it up.
Flyhalf205 said:
If you have sprint service. Anything on nougat will not work yet. If you running GSM on sprint then edit your build.prop. find and delete line telephony.lteOnCdmaDevice=1
Sent from my HTC6535LVW using Tapatalk
Click to expand...
Click to collapse
thank you so much, I deleted line and now its work. by the way Phone Call Properties dont works
Phone call don't works.T6 international version
Thanks for this , But I want to know can I use it for T6DWG ( one max dual sim ) .
DiDroniX said:
Phone call don't works.T6 international version
Click to expand...
Click to collapse
I'm now using a little bit older device source codes, maybe it will get fixed in next build with latest cm sources.
m.ghareb said:
Thanks for this , But I want to know can I use it for T6DWG ( one max dual sim ) .
Click to expand...
Click to collapse
Not yet supported , i think it's hard to develop because there's no much resources can be use at this moment.
Thanks
tarkzim said:
I'm now using a little bit older device source codes, maybe it will get fixed in next build with latest cm sources.
Click to expand...
Click to collapse
Tarkizm İ love this rom, its wonferfull, but as İ said call properties dont work for sprint, İ wait your new work.
:good:
[ROM][NEW]Nougat 7.1.1 - SE 8.5 & Gaming [J700F/H/M, J710FN, J7108, A310F/Y/M, A510F/Y/M, A710F/Y/M]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* You are not allowed to take anything from this rom or steal my works, you will be reported in such cases.
* Don't paste direct download links on other forums/anywhere else, or create duplicate threads anywhere.
*/
Features
ROM
Android 7.1.1 Nougat (SE 8.5)
Stock Samsung Experience
Odexed (faster 1st time boot)
Added Blue Light Filter(Google's Night Light)
VoLTE Supported
VoWifi Supported
Dual Messenger
Working Dialler Secret Codes
Device Specific Installer
Build.prop Tweaks
Fluid UI
Kernel tweaks
Rendering tweaks
Dalvik tweaks
Bit GPU tweaks
Disable unnecessary loggers
Better scrolling
and more!
Added Applock
Smooth
Purely Same As Stock
Official System Status
Latest Software Update Status
Stock Camera Libs Are Used To Reduce Chances Of Camera Failure
Added Other Languages
New Boot Logos For All Supported Devices.
Clipboard For Keyboard.
Set Limit For Mobile Hotspot Feature.
Idea (Indian) And Digi (Romania) SIM Card VoLTE Support, Will Work In Supported Devices. (Give me feedback).
QR Code Generator For Mobile Hotspot.
New 2019 Security Patches Applied.
A310F-Y-M / A510F-Y-M / A710F-Y-M --- Specific Features
Fingerprint Sensor, Compass Working.
Palm Swipe To Capture.
Screen Mode In Display Settings.
NFC Works.
"Block accidental touches" feature in Display Settings.
J7108 / J710FN --- Specific Features
Screen Mode In Display Settings.
"Block accidental touches" feature in Display Settings.
KERNEL
J700F-H-M
MDMR kernel V2 - Build 1
Stock CPU Frequencies (400 Mhz to 1.5 Ghz)
Built With j7elte dtb
Added Stock Marshmallow Battery Drivers
Stock Marshmallow regulator drivers added
Added Stock Marshmallow Sensor Drivers (all)
Fixed Vibration
Fixed Headset Jack
Removed Bloats/Features That Are Useless
J7108 / J710FN
Stock Nougat Kernel
A310F-Y-M
Stock Nougat Kernel
A510F-Y-M
Stock Nougat Kernel
A710F-Y-M
Stock Nougat Kernel
Supported devices
Galaxy J7
J700F
J700H
J700M
Galaxy On8
J710FN
Galaxy J7 2016
J7108
Galaxy A3 2016
A310F
A310Y
A310M
Galaxy A5 2016
A510F
A510Y
A510M
Galaxy A7 2016
A710F
A710Y
A710M
Bugs
J700F/H/M - J7108 - J710FN - A310F/Y/M - A510F/Y/M - A710F/Y/M
None (You Tell Me)
Note :- In Case Of Bugs, Then Tell Me And Make Sure You Are Ready To Test My Fixes, Otherwise No Need To Report About The Bugs Since Its Useless For Both Of Us
After Reporting A Bug And Ignoring To The Replies/Fixes Given To You Will Only Lead To The Conclusion That You Are Giving False/Fake Informations...
Instructions
Follow The Instructions Strictly
Boot Into TWRP.
Wipe Dalvik, Data, Cache, System.
Flash SE 8.5 V1.3 ROM.
Flash ROM-Configurer Zip By Choosing Your Country/Modem/Csc Related File.
Reboot.
Downloads
V1.3
Link 1 - (Google Drive)
SE8.5 - ROM
ROM - Configurer
Link 2 - (MEGA)
SE8.5 - ROM
ROM - Configurer
Older versions
V1.2
Link 1 - (Google Drive)
SE8.5 - ROM
Link 2 - (MEGA)
SE8.5 - ROM
NOTE:- DONT FLASH CSC OR ADDONS!SUPPORTED DEVICES: J700F/H/M, A510F/Y, J710FNBUGS:- For A510F/Y - No audio, fingerprint sensor, compass, screen mode For J700F/H/M, J710FN - None
Note :- Don't post alternate/direct download links anywhere else
Addons
Go to Addons
Telegram
SE Roms & Cosmic Kernels Group - Exynos 7580
Screenshots
Go to screenshots
Huge thanks to
@ SmokanE (Peniac Simion) - For testing on A5 2016 and giving a lot of necessary files and volte guide, most respected tester and helpful person I had.
@ Grand Arbiter - For doing a lot of continuous tests on A5 2016, is also the reason to help me make the rom better.
@ themagicalmammal - For testing on On8, providing and guiding about new bootlogos.
@ Hnojohn - For doing a lot of tests on J7 2016 (J7108).
@ CaelestisZ - For everything I know about kernel and helping.
@ believeme_raj - For doing a lot of tests on On8 (J710FN).
@ prototype74 - For Google's Night light guide.
@ samsung - For Rom and Kernel source.
Tap that Thanks button if I helped you
XDA:DevDB Information
Nougat Rom for Exynos 7580
Contributors
mdmaher
Source Code: Kernel Sources
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required:
- J7 - 6.0.1 (Marshmallow) - Bootloader
- On8 - 7.0 (Nougat) - Bootloader
- J7 2016 - 6.0.1 (Marshmallow) - Bootloader
- A3 2016 - 7.0 (Nougat) - Bootloader
- A5 2016 - 7.0 (Nougat) - Bootloader
- A7 2016 - 7.0 (Nougat) - Bootloader
Version Information
Status: Stable
Current Stable Version: 1.3
Release Date: 2020-12-10
Created 2020-07-06
Last Updated 2020-12-10
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* You are not allowed to take anything from this rom or steal my works, you will be reported in such cases.
* Don't paste direct download links on other forums/anywhere else, or create duplicate threads anywhere.
*/
Features
ROM
Android 7.1.1 Nougat (SE 8.5)
Highly Debloated
Deodexed
Zipaligned
Added Blue Light Filter(Google's Night Light)
VoLTE Supported
VoWifi Supported
Device Specific Installer
Build.prop Tweaks
Fluid UI
Kernel tweaks
Rendering tweaks
Dalvik tweaks
Bit GPU tweaks
Disable unnecessary loggers
Better scrolling
and more!
Added Applock
Smooth
Official System Status
Latest Software Update Status
Some Features Removed For Performance Improvement
Stock Camera Libs Are Used To Reduce Chances Of Camera Failure
Added Other Languages
Highly Optimized
New Boot Logos For All Supported Devices.
KERNEL
J700F-H-M
Powered By Korvac Kernel
Underclocked CPU Frequencies (300 Mhz to 1.5 Ghz)
And Many More Features
J710FN
Stock Nougat Kernel
A510F-Y
Stock Nougat Kernel
A710F-Y
Stock Nougat Kernel
J7108
Stock Nougat Kernel
Supported devices
Galaxy J7
J700F
J700H
J700M
Galaxy On8
J710FN
Galaxy A5 2016
A510F
A510Y
Galaxy A7 2016
A710F
A710Y
Galaxy J7 2016
J7108
Bugs
J700F/H/M - J710FN - J7108
None (You Tell Me)
A510F/Y - A710F/Y
NFC, Fingerprint, Compass
Note :- In Case Of Bugs, Then Tell Me And Make Sure You Are Ready To Test My Fixes, Otherwise No Need To Report About The Bugs Since Its Useless For Both Of Us
After Reporting A Bug And Ignoring To The Replies/Fixes Given To You Will Only Lead To The Conclusion That You Are Giving False/Fake Informations...
Instructions
Boot into TWRP.
Wipe Dalvik, Data, Cache, System.
Flash SE-Gaming Edition V1.0 ROM.
Reboot.
Downloads
V1.0
Link 1 - (Google Drive)
SE-GAMING ROM (Links are temporarily closed until all bugs are fixed)
Link 2 - (MEGA)
SE-GAMING ROM (Links are temporarily closed until all bugs are fixed)
Note :- Don't post alternate/direct download links anywhere else
Telegram group
SE Roms & Korvac Kernels Group - Exynos 7580
Huge thanks to
@ CaelestisZ - For everything I know about kernel and helping
@ themagicalmammal - For testing on On8, providing and guiding about new bootlogos, NFC fix and his kernel
@ ajtiwari - For deodex related help and testing
@ Nabin88 - For providing stock files and testing
@ prototype74 - For Google's Night light guide
@ samsung - For Rom and Kernel source
Tap that Thanks button if I helped you
XDA:DevDB Information
Nougat Rom for Exynos 7580
Contributors
mdmaher
Source Code: Kernel Sources
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required:
- J7 - 6.0.1 (Marshmallow) - Bootloader
- On8 - 7.0 (Nougat) - Bootloader
- A5 2016 - 7.0 (Nougat) - Bootloader
- A7 2016 - 7.0 (Nougat) - Bootloader
- J7 2016 - 6.0.1 (Marshmallow) - Bootloader
Version Information
Status: Stable
Current Stable Version: 1.0
Release Date: 2020-09-03
Created 2020-09-03
Last Updated 2020-09-03
SCREENSHOTS:
Addons
ADDONS
Warning: These addons are made for SE8.5 V1.3, its not tested in any other rom.
FOR SE8.5 V1.3
----------------------------------------------------------------------------------------------------------------------------------------
Face unlock/Face recognition - DOWNLOAD
NOTE ----> Wipe dalvik cache, data, cache. Then flash Rom, csc, then this FaceUnlock.zip
NOTE ----> Some update of google play services is breaking this feature.
----------------------------------------------------------------------------------------------------------------------------------------
Smart Capture/Scrolling capture - DOWNLOAD
NOTE ----> Just flash SmartCapture.zip and reboot
----------------------------------------------------------------------------------------------------------------------------------------
Join us on Telegram to test for different variants. (If anyone would like to test bug fixes, modded kernels etc.)
Telegram group invite: Nougat/SE8.5 & Korvac Kernels - Exynos 7580
MEGA links added
mdmaher said:
MEGA links added
Click to expand...
Click to collapse
what about gaming performance bro ???
zain.malik said:
what about gaming performance bro ???
Click to expand...
Click to collapse
I havent tried gaming recently, but I think it should be same as stock. (Based on what I tried 2 months ago while testing the rom)
When I get time, I might release overclocked version of kernels separately. But not sure about it...
thanks for the rom bro <3 I'm wearing it, perfect rom <3 <3
BrunoM4s said:
thanks for the rom bro <3 I'm wearing it, perfect rom <3 <3
Click to expand...
Click to collapse
Enjoy
What in next release:
Kernel
Removed underclock frequency 300 Mhz for now (so 400 Mhz to 1.5 Ghz) [underclock will be added later]
Stock Marshmallow sensor drivers added (all)
Stock Marshmallow regulator drivers added
Renamed kernel version to "V1 build 10"
Rom
Stock camera libs are used to reduce chances of camera failure
New csc files (may be)
Note- No ETA
Bro, you built wonderful rom.. big thanks for you..
Its Pure j7 stock nougat rom.. I installed rom yesterday.. But my camera is failed..
1.auto screen lock while turn on back camera.
2front camera is ok (using "sweet selfie" or others)
Thats the problem..but in installed "los 16,los 17.1."
There camera is working good..
And i installed "enigma ux refined".
There camera is work..but slow while capturing..(lagging camera). and its move to front camera,its working good..)
Whats is the problem you guess?
I read your next update changelog.. Camera will fix it?
Piyumal95 said:
Bro, you built wonderful rom.. big thanks for you..
Its Pure j7 stock nougat rom.. I installed rom yesterday.. But my camera is failed..
1.auto screen lock while turn on back camera.
2front camera is ok (using "sweet selfie" or others)
Thats the problem..but in installed "los 16,los 17.1."
There camera is working good..
And i installed "enigma ux refined".
There camera is work..but slow while capturing..(lagging camera). and its move to front camera,its working good..)
Whats is the problem you guess?
I read your next update changelog.. Camera will fix it?
Click to expand...
Click to collapse
Which model ?
Is it J700F or ??
I will need you to test my fixes. Check your PM, also tell me your device model.
And to all, tell me the bugs you are having, only then I will be knowing about it, so that I can try to fix them...
It's there flickering screen in this ROM?
GrayNinja33 said:
It's there flickering screen in this ROM?
Click to expand...
Click to collapse
Flickering issue is not due to ROMs
I think it's due to display damage, it happens when you use the device at very low brightness for long(just like my j7, even in stock rom, but its cause/reason isn't known).
The workaround I do is not to use the device while charging, it temporarily fixes flickering for me, and also dont keep the brightness too low...
mdmaher said:
Which model ?
Is it J700F or ??
I will need you to test my fixes. Check your PM, also tell me your device model.
And to all, tell me the bugs you are having, only then I will be knowing about it, so that I can try to fix them...
Click to expand...
Click to collapse
My device is J700F
Piyumal95 said:
My device is J700F
Click to expand...
Click to collapse
Check PM for flashable zip for fixing camera...
-----------------------------------------------------------
Note :- Whenever anyone posting bugs, you must be pretty much sure (confirm yourself) that the bug exists, and that your device doesnt have any damages. Im using J700F and I don't face any such issues. So when posting bugs, be sure to test twice that ithe bug really exists or not
Atleast go back to stock rom and use it for 1 day before using this rom if you find bugs! (For confirmation)
bro, when I'm on a whatsapp video call with 50% battery, the battery simply drains until the device shuts down in less than 20 seconds. other than that the rom is well stable! but smart view is not working
BrunoM4s said:
bro, when I'm on a whatsapp video call with 50% battery, the battery simply drains until the device shuts down in less than 20 seconds. other than that the rom is well stable! but smart view is not working
Click to expand...
Click to collapse
That doesn't happen for me...
Which model?? Also tell me your baseband version (mine is *XXU4BQC3)
Do you charge your device till 100% ? (because i only charge till 80-85%)
I had doubt about smart view in the beginning itself.
Because I havent tested it since there is no way for me.
So I think I will upload next release only when these are fixed.
Note :- Go back to stock rom and use it atleast for 1 day, then use this rom and tell me about the bugs. I dont find such things, moreover Im using the same device as yours!
So, I will consider the bug reports, that they really exist only if you are pretty sure about it
Thread Links Updated