I have a Sony Xperia Z2 with Existenz mod; and I would really like to access my apps in-phone again if possible, and then deroot and reformat. I tried to do this by deleting the "su" folder through recovery; now my phone is stuck on the boot logo and gets hot and reboots to the logo. I can load the recovery just fine.
How can I fix the situation to get access to my apps firstly?
gonfalons said:
I have a Sony Xperia Z2 with Existenz mod; and I would really like to access my apps in-phone again if possible, and then deroot and reformat. I tried to do this by deleting the "su" folder through recovery; now my phone is stuck on the boot logo and gets hot and reboots to the logo. I can load the recovery just fine.
How can I fix the situation to get access to my apps firstly?
Click to expand...
Click to collapse
Okay, since I did stop using ROMs and root I don't know if you can fix this without wiping your data such as photos or downloaded apps
But I can tell you how to fix it
1. You need to download flash tool
2. Download your favorite stock firmware (lollipop or kitkat)
3. Install flashtool and drivers (you can find them in drivers folder inside flash tool folder)
4. Happy flashing
If you need help on how to flash you can PM me
gonfalons said:
I have a Sony Xperia Z2 with Existenz mod; and I would really like to access my apps in-phone again if possible, and then deroot and reformat. I tried to do this by deleting the "su" folder through recovery; now my phone is stuck on the boot logo and gets hot and reboots to the logo. I can load the recovery just fine.
How can I fix the situation to get access to my apps firstly?
Click to expand...
Click to collapse
Try to flash supersu trough recovery. Download the flashable zip from chainfire directly and flash it. It should boot if you deleted only that folder.
thank you! I will definitely try that, lets see if this works. I will want to remove the root and factory reset back to default afterwards, the wipe did not seem to remove the mod the last time, any word on how to do that? Thanks either way!
gonfalons said:
thank you! I will definitely try that, lets see if this works. I will want to remove the root and factory reset back to default afterwards, the wipe did not seem to remove the mod the last time, any word on how to do that? Thanks either way!
Click to expand...
Click to collapse
Existenz is a full rom not a mod so it wont get wiped after a factory reset. You will need to flash an ftf (stock firmware) trough flashtool in order to restore your device to factory state. You dont need to check "wipe data" to keep your apps and data but restore all stock aystem files. And if then your phine doesn't boot, flash the ftf again with wipe data checked.
5ageman said:
Try to flash supersu trough recovery. Download the flashable zip from chainfire directly and flash it. It should boot if you deleted only that folder.
Click to expand...
Click to collapse
I am not having luck with this, I am quite lost. do I need to download anything other than supersu? How can I install this on my phone without it turning on?
gonfalons said:
I am not having luck with this, I am quite lost. do I need to download anything other than supersu? How can I install this on my phone without it turning on?
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/xperia-z2/help/z2-z3-root-recovery-stock-5-1-1-264-rom-t3320277
Related
Hey everybody,
I think I crashed my Phone. It reboots everytime I want to start it.
It starts till the SE logo.
That happend after I copied tun.ko files into system folder, installed busybox and cisco any connect.
So I tried to enter system folder via adb to get it fixed. But it failed.
So my question.
Is there any possibility to fix my phone without loosing user and app data or to copy the rom?
floßboot said:
Hey everybody,
I think I crashed my Phone. It reboots everytime I want to start it.
It starts till the SE logo.
That happend after I copied tun.ko files into system folder, installed busybox and cisco any connect.
So I tried to enter system folder via adb to get it fixed. But it failed.
So my question.
Is there any possibility to fix my phone without loosing user and app data or to copy the rom?
Click to expand...
Click to collapse
Try reflashhing ROM with recovery..do not clear dalvik or reset factory reset options in recovery..
Gintonic.SE + zombie-pack kernel by slade ..
And how do I get into recovery?
if you have the recovery instaled press the back button and release several times once you see the sony ericson logo.
if you dint install the recovery i'm sorry but i dont know what you can do. hope some one can help then
Simple and short.
No.
Oh, that doesn´t sound good.
I have a general question. What is a Trim Area?
Try updating your firmware with se PC companion and rooting you phone again ...
floßboot said:
And how do I get into recovery?
Click to expand...
Click to collapse
use X10 flash tool to flash your ROM to a stock one, then use flash tool to root and install xrecovery
download a stock kernel for now (its in .ftf format)
But then I will loose my data, right?
Yes in any update you will loose your data unless you have backed up your data.......
kashem58 said:
use X10 flash tool to flash your ROM to a stock one, then use flash tool to root and install xrecovery
download a stock kernel for now (its in .ftf format)
Click to expand...
Click to collapse
where could i get "x10 flash tool", "xrecovery" and a stock kernel from?
Edit: Sorry, found a place
http://forum.xda-developers.com/showpost.php?p=16474966&postcount=3
Hey, this is my first post so be easy!
I rooted my One X a while back and it has been fine and only now I decided to install a ROM.
I went for Cyanogenmod 9 and followed the instructions to install it on my phone.
IT went smoothly and runs okay as far as I can tell apart from Recovery Mode.
Everytime I go to boot into recovery it just starts the phone as usual. It doesn't get stuck on the boot screen or anything, it starts just like normal but it doesn't start in recovery!
I have tried doing to through the Power + Volume Down method and through CLockworkMod app, no luck.
I have also tried to reflash Recovry but it still doesn't start.
This is frustrating as I can't even restore my phone to an earlier backup due to this.
Any ideas??
Cheers!
Try using ADB. The code is
su
reboot recovery
Sent from my Optimus Me using xda premium
Sorry for my complete 'noobness' but whats that adb?
Cheers
ADB is short of android debug bridge. It comes with the android sdk.You can google it. Once ypu install the sdk you can google how to set up and use adb.Also don't forget to put ypur phone in debugging mod via Settings> Application>Developmemt
Sent from my Optimus Me using xda premium
I have tried that, using adb reboot reovery, and it will doesn't load. Just boots the phone like normal. :/
Any other ideas?
Whats about refalshing a stock rom via odin
Go to the download mode and flash the stock because it includes stock recovery
if your are on this point youre full resored and could go on flashing roms ==)
Riiiight I've managed to get into recovery (by clicking factory reset in bootloader) and Ive restored a backup which I did before installing the ROM.
But now It's bootlooping!
I think I need a new boot.img.
Help..again? haha
thisISben90 said:
Riiiight I've managed to get into recovery (by clicking factory reset in bootloader) and Ive restored a backup which I did before installing the ROM.
But now It's bootlooping!
I think I need a new boot.img.
Help..again? haha
Click to expand...
Click to collapse
befoure u flash a new bootimage go to recovery and whipe data/cache afterwards it should work
if this doesnt work try the bootloader
Hello guys,
I've got an X10mini (E10) (second hand but should not branded)
I'm actually stucked in a bootloop. It happened after I tried flashing the miniCM7 ROM with CWM.
I've tried the wipe data/factory reset frome CWM but nothing happened
I've tried the recovery option from my previous backup
Nothing
I've tried reflashing the Stock Rom (found in one of Xda-developers thread)
And I still got a bootloop (with the Sony Ericson logo)
Could anyone help me? =)
Gahu said:
Hello guys,
I've got an X10mini (E10) (second hand but should not branded)
I'm actually stucked in a bootloop. It happened after I tried flashing the miniCM7 ROM with CWM.
I've tried the wipe data/factory reset frome CWM but nothing happened
I've tried the recovery option from my previous backup
Nothing
I've tried reflashing the Stock Rom (found in one of Xda-developers thread)
And I still got a bootloop (with the Sony Ericson logo)
Could anyone help me? =)
Click to expand...
Click to collapse
Why don't you try a repair with SEUS or PC Companion, that will get you back to original.
You said you did wipe data/factory reset, but did you wipe cache and dalvick-cache too (second one in advanced menu in CWM), because they're filled with useless junk from your old ROM, causing many errors.
SmG67 said:
Why don't you try a repair with SEUS or PC Companion, that will get you back to original.
You said you did wipe data/factory reset, but did you wipe cache and dalvick-cache too (second one in advanced menu in CWM), because they're filled with useless junk from your old ROM, causing many errors.
Click to expand...
Click to collapse
I can't find the SEUS or PCC repair option
And yes I did wipe the dalvick cache but still nothing happens
Gahu said:
I can't find the SEUS or PCC repair option
And yes I did wipe the dalvick cache but still nothing happens
Click to expand...
Click to collapse
Disconnect your phone from your pc
Start PC Companion
Choose Support Zone
It will try to find an update for your phone, but since it's disconnected it can't
It will offer a Repair link
Follow the instructions from there.
SmG67 said:
Disconnect your phone from your pc
Start PC Companion
Choose Support Zone
It will try to find an update for your phone, but since it's disconnected it can't
It will offer a Repair link
Follow the instructions from there.
Click to expand...
Click to collapse
The fact is that the last version of PC Companion doesn't have that Support Zone anymore
and downloading the previous version doesn't help cause it force you to upgrade the software ...
Gahu said:
The fact is that the last version of PC Companion doesn't have that Support Zone anymore
and downloading the previous version doesn't help cause it force you to upgrade the software ...
Click to expand...
Click to collapse
I've updated mine whenever it requested it and in mine it is still there...
SmG67 said:
I've updated mine whenever it requested it and in mine it is still there...
Click to expand...
Click to collapse
Okay I think I might be cursed or something ... Cause this option never show with my PCC ...
I only got a "blank" window even if I restart with the phone unpluged
Gahu said:
Okay I think I might be cursed or something ... Cause this option never show with my PCC ...
I only got a "blank" window even if I restart with the phone unpluged
Click to expand...
Click to collapse
I see, mine looks more like in the screenshot below
You've got an unlocked bootloader right?
I can get you an original SE Firmware to flash with flashtool if you're interested... just let me know...
SmG67 said:
I see, mine looks more like in the screenshot below
You've got an unlocked bootloader right?
I can get you an original SE Firmware to flash with flashtool if you're interested... just let me know...
Click to expand...
Click to collapse
Yeah I unlocked the bootloader with flashtool (the log said it was done properly)
And it would be nice to get the original SE firmware =D (I tried one and it didn't solve anything but still ... what choice do I got?)
Gahu said:
Yeah I unlocked the bootloader with flashtool (the log said it was done properly)
And it would be nice to get the original SE firmware =D (I tried one and it didn't solve anything but still ... what choice do I got?)
Click to expand...
Click to collapse
You don't have much choice i suppose, i'll give you the download link in a pm
Just download it, put it in the firmwares subfolder where flashtool is installed and flash it to your phone, it will take a while because it flashes everything (kernel and rom), but i hope it will help you
SmG67 said:
You don't have much choice i suppose, i'll give you the download link in a pm
Just download it, put it in the firmwares subfolder where flashtool is installed and flash it to your phone, it will take a while because it flashes everything (kernel and rom), but i hope it will help you
Click to expand...
Click to collapse
OH yeah =)
So long to the Bootloop =D Thanks =)
Gahu said:
OH yeah =)
So long to the Bootloop =D Thanks =)
Click to expand...
Click to collapse
Good luck flashing m8 Keep it lying around, you can always get out of trouble
SmG67 said:
Good luck flashing m8 Keep it lying around, you can always get out of trouble
Click to expand...
Click to collapse
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Kubaz said:
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Click to expand...
Click to collapse
Connect your phone to your PC using the usb-cable
Boot into CWm (you say you can)
Go into Mounts and Storage
Choose USB-Mass storage
You should be able to access the sd-card from your pc now and copy the ROM and maybe Gapps.
SmG67 said:
Connect your phone to your PC using the usb-cable
Boot into CWm (you say you can)
Go into Mounts and Storage
Choose USB-Mass storage
You should be able to access the sd-card from your pc now and copy the ROM and maybe Gapps.
Click to expand...
Click to collapse
Worked like a charm!. Thank you very much. I went for mini cm 7 as it seemed the most stable. thanks for your help.
just need to get the sd card to mount and I am all set. Do you have any ideas why I can't get it to mount?
Kubaz said:
Worked like a charm!. Thank you very much. I went for mini cm 7 as it seemed the most stable. thanks for your help.
just need to get the sd card to mount and I am all set. Do you have any ideas why I can't get it to mount?
Click to expand...
Click to collapse
I don't know, apparently it worked fine when you connected it to your pc...
Maybe you could pull all your files off the sd-card to your pc, boot into cwm and format the sd-card (in mounts and storage), then reboot into the rom.
If that's all successful, put the files back on your sd-card.
SmG67 said:
I don't know, apparently it worked fine when you connected it to your pc...
Maybe you could pull all your files off the sd-card to your pc, boot into cwm and format the sd-card (in mounts and storage), then reboot into the rom.
If that's all successful, put the files back on your sd-card.
Click to expand...
Click to collapse
What would happen if I select "apply update from sd card". This is the second option under CWM recovery.
Should I restore from Nanadroid. i s this necessary?
Could partitioning the sd card help? Thanks again!
Kubaz said:
What would happen if I select "apply update from sd card". This is the second option under CWM recovery.
Should I restore from Nanadroid. i s this necessary?
Could partitioning the sd card help? Thanks again!
Click to expand...
Click to collapse
The 'Apply Update.zip' does exactly the same thing as the 'Install zip from sd-card', but the first option only works for zip-files named 'update.zip' in the root of your sd-card, the second option will let you browse the sd-card and select a zip-file with any name. The second option is the one you use to install your ROM.
Restoring from nandroid, just fills your internal phone-memory with the old stuff you had in there, it won't affect your sd-card, other than that it reads the nandroid from that sd-card.
Your sd-card needs to be formatted with the fat-filesystem to work properly, so partitioning or not makes not much of a difference, only that the available space for your stuff (music, photo's, etc.) is less because the other partitions take up space too.
If you can flash your ROM in CWM from sd-card I don't really see any problem with your sd-card.
worked like a charm. many thanks!
Kubaz said:
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Click to expand...
Click to collapse
"Alternatively, on start up, I can get into cwm recovery".
I have the exact same problem though i cant get into clockworkmod recovery. May i know how you got into cwm recovery? Any help is appreciated.
Thanks!
EDIT on Jan 18,2015
Please see post #9 for a flashable zip of the stock ROM with root that is taken after updated to B148.
Below original post has version B126.
******** ORIGINAL *********
Fix soft-bricked Mate 2 (MT2-L03) phone using TWRP
If you messed up the phone and it came to a state that phone can not boot into android, if you have TWRP installed and have a backup, then you know how to fix that easily.
But if you don't have your own backup, I have upload my system partition so hopefully you can use this to restore your phone. The backup is taken very close to stock, and it is rooted with SuperSU installed.
BTW, there is a "safe mode" boot method, so try that before using twrp recovery:
http://forum.xda-developers.com/asc...ted-amazon-app-store-stuck-boot-loop-t2872628 (post 6 and 7)
Steps to Restore you phone if all other ways failed:1. Your MT2-L03 need have bootloader unlocked, and TWRP recovery installed properly. Even your phone is soft bricked, as long as you can boot into bootloader mode, you can still unlock bootloader and install twrp recovery.Unlock bootloader: http://forum.xda-developers.com/ascend-mate2/general/progress-rooting-ham2-t2867975
Install twrp: http://forum.xda-developers.com/asc.../2014-09-22-teamwin-recovery-project-t28851442. Boot into twrp recovery and select "System" partition only, and backup it to your external storage (yes, I know your system partition is bad, this step is to create proper twrp backup directory)
3. Download following file to your PC, unzip it.http://tinyurl.com/qzxkm4x
FileName: TWRP_BACKUPS_stock-system-with-root.zip4. Turn off phone and take out your SD card out and plug into PC, then navigate to following directory under the SDCARD: \TWRP\BACKUPS\xxxxx, the xxxxx is a string that different in each phone
5. Copy all the files unzipped from step 3 to above location. overwrite any files with same name.
6. Put back the SDcard to the phone, and boot into TWRP recovery.
7. Choose restore, select the only entry that you did the backup, and select "System" only, perform the restore.
8. Wipe your dalvik cache, cache.
9. Then reboot.
10. If you still have problem, boot into recovery again, and wipe /data parition as well (Factory Reset).Download the MT2-L03 backup here:
http://tinyurl.com/qzxkm4x
FileName: TWRP_BACKUPS_stock-system-with-root.zip
And thanks @dbmj unlock bootloader, @Modding.MyMind build twrp recovery, and @D33PTHAWTE confirmation that this fixed his phone.
Glad you got this posted. This will be very vital to many people down the road. And great work on giving instructions to create a backup for the simplicity of automating the needed directories for usage of the actual shared backup. Thumbs up bro.
@D33PTHAWTE, welcome back
For everyone not getting TWRP to work I have done it on 3 HAM2s and all work try this.
1.flash this stock recovery https://drive.google.com/folderview?id=0B-nJFDpWA4MdVjhEYzU3TXlMZ0U&usp=sharing
2.even if you have your own use that because I know that works and I dont know what yours is.
3.boot into the recovery and make sure that its the stock recovery and its working.
4. restart the phone 2 or 3 times to be safe
5. flash using twrp using 15 second ADB installer.
Has anyone followed thoes steps and that recovery above? (not your own) if not try that and let me know. take a screen shot of what ADB is showing you so I can see that TWRP was successfully installed. Starting at square one. Flash twrp and show me its flashed.
superbass311 said:
For everyone not getting TWRP to work I have done it on 3 HAM2s and all work try this.
1.flash this stock recovery https://drive.google.com/folderview?id=0B-nJFDpWA4MdVjhEYzU3TXlMZ0U&usp=sharing
2.even if you have your own use that because I know that works and I dont know what yours is.
3.boot into the recovery and make sure that its the stock recovery and its working.
4. restart the phone 2 or 3 times to be safe
5. flash using twrp using 15 second ADB installer.
Has anyone followed thoes steps and that recovery above? (not your own) if not try that and let me know. take a screen shot of what ADB is showing you so I can see that TWRP was successfully installed. Starting at square one. Flash twrp and show me its flashed.
Click to expand...
Click to collapse
i tried several time cant boot into twrp ....tried through adb it says flash done in 1.1 or something sec seems like all went well ...but when u try and boot into recovery it goes to android recovery screen with broken android mark .....
other than this phone works well and boots normally into android and i can make calls etc ...its just when i try to boot into recovery it always goto ...factory recovery with android and red mark ....whats goign on ...thanks
Hey I tried this on my phone, I think everything worked okay. Android ui crashes constantly when my sim card is inserted. When I try to do the OTA update it says theres an error with facebook in the cust folder. I tried to copy that from the zip but it failed to copy. Im out of ideas of what to do next.
notoriouspk said:
i tried several time cant boot into twrp ....tried through adb it says flash done in 1.1 or something sec seems like all went well ...but when u try and boot into recovery it goes to android recovery screen with broken android mark .....
other than this phone works well and boots normally into android and i can make calls etc ...its just when i try to boot into recovery it always goto ...factory recovery with android and red mark ....whats goign on ...thanks
Click to expand...
Click to collapse
What button combination are you using? And did you have unlocked bootloader?
notoriouspk said:
i tried several time cant boot into twrp ....tried through adb it says flash done in 1.1 or something sec seems like all went well ...but when u try and boot into recovery it goes to android recovery screen with broken android mark .....
other than this phone works well and boots normally into android and i can make calls etc ...its just when i try to boot into recovery it always goto ...factory recovery with android and red mark ....whats goign on ...thanks
Click to expand...
Click to collapse
aragon257 said:
Hey I tried this on my phone, I think everything worked okay. Android ui crashes constantly when my sim card is inserted. When I try to do the OTA update it says theres an error with facebook in the cust folder. I tried to copy that from the zip but it failed to copy. Im out of ideas of what to do next.
Click to expand...
Click to collapse
Hi, I have seen these issues pretty frequent recently that:
1) /cust partition is not covered in this TWRP backup, so after restore, you may still got facebook app mismatch failure when upgrade.
2) Even after a successful OTA upgrade, many people (include myself) met problem to reflash the TWRP image.
So, give me a few days, I think I can make a flashable zip that has latest (B148) stock ROM with root, probably this weekend.
xordos said:
Hi, I have seen these issues pretty frequent recently that:
1) /cust partition is not covered in this TWRP backup, so after restore, you may still got facebook app mismatch failure when upgrade.
2) Even after a successful OTA upgrade, many people (include myself) met problem to reflash the TWRP image.
So, give me a few days, I think I can make a flashable zip that has latest (B148) stock ROM with root, probably this weekend.
Click to expand...
Click to collapse
Thank you so much!
Please try install this zip from recovery:
http://tinyurl.com/q62m68x
MT2L03_B148_Stock_ROM.zip
File Size: 670,252,615 md5: 684bcb2674367814b96eadfa0debe846
Click to expand...
Click to collapse
This is a clean Stock ROM (flashable zip) with Root after upgrade to B148 for MT2L03.
It should only be used for plain carrier unlocked Huawei MT2-L03. Other varies (carrier locked) MT2L03 is un-tested and may brick your phone.
This ROM include /cust, /firmware, /system and /boot partition.
The official B148 update also contains update to SBL1/ABoot/TZ/RPM partition, they are not included due to risk concern.
I didn't fully test this ROM, I just pickup the image from my early backups. I installed it to my already updated phone and boot up fine. So please try it and let me know if you see any problems.
Working great for me! thank you, fixed all my problems.
aragon257 said:
Working great for me! thank you, fixed all my problems.
Click to expand...
Click to collapse
Imei is correct after flashing this?
Moody66 said:
Imei is correct after flashing this?
Click to expand...
Click to collapse
A little confused on what you mean... My sim card works fine in my phone now
aragon257 said:
A little confused on what you mean... My sim card works fine in my phone now
Click to expand...
Click to collapse
Someone tried using a similar process to swap a consumer cellular mate to a standard mate. They lost their imei in the process.
Moody66 said:
Someone tried using a similar process to swap a consumer cellular mate to a standard mate. They lost their imei in the process.
Click to expand...
Click to collapse
Oh I dont think I did, I havent noticed anything. I do have the standard mate and not a consumer cellular mate.
standard ham2 bought from gethuawei
just testing your stock rom zip and everything works fine.
thank you for your effort and time.
after flashing i have no toggles and i dont have LTE so far
thugmafia said:
after flashing i have no toggles and i dont have LTE so far
Click to expand...
Click to collapse
toggle is set in settings -- notif panel, lte pls check apn settings.
xordos said:
toggle is set in settings -- notif panel, lte pls check apn settings.
Click to expand...
Click to collapse
its all gray out meaning i cant turn it on and the APN is set i used to get LTE on tmobile but now it juz 3G H 4G
Is your phone mt2l03 and bought as unlocked?
Another thing you can try is do a factory reset (to be safe backup /data first) and wipe cache, dalvik cache.
xordos said:
Is your phone mt2l03 and bought as unlocked?
Another thing you can try is do a factory reset (to be safe backup /data first) and wipe cache, dalvik cache.
Click to expand...
Click to collapse
yes i did i returned to the back up but still no LTE but the speed is the some
and one more thing i notice was the not home screen style to be able to hide the nar bar
I had an costume ROM installed, but at one point, while trying to change the recovery it bricked, and I just received errors like "Messenger has stopped" for every sing app (even system) and the screen all blacked, then I reinstalled the costume ROM again, but it got worse, cause I could only see a black screen, and had to remove the battery. So I decided to go back to the original recovery and installed the original, official ROM, and when I installed it appeared "Unfortunately System UI has stopped" every second, so I wiped the data in the original recovery mode and it worked, but now it appears the message: "Unauthorized actions have been detected" and it asks to restart my phone, that message is appeared all the time too. How do I get rid of it?
And the boot when i turn the device on is still the one from the ROM Note 7 style (white), how do I change that to?
If you still have TWRP installed you can try this method to change boot logo.
For the other problem try to use your last working backup, if it won't work - wipe everything and then flash original image throught Odin.
93drago said:
If you still have TWRP installed you can try this method to change boot logo.
For the other problem try to use your last working backup, if it won't work - wipe everything and then flash original image throught Odin.
Click to expand...
Click to collapse
I guess, I will need to install TWRP again, and do that to change the boot logo;
I never had a backup, so should I wipe everything again (In TWRP?) And then install the original ROM throught Odin again?
To be sure wipe everything including internal storage - recovery and download mode will remain, everything else will be lost so make a backup of important files. Download latest firmware from Sammobile and flash it through Odin (search for SamFirm on xda to download faster). That should do the work.
93drago said:
To be sure wipe everything including internal storage - recovery and download mode will remain, everything else will be lost so make a backup of important files. Download latest firmware from Sammobile and flash it through Odin (search for SamFirm on xda to download faster). That should do the work.
Click to expand...
Click to collapse
Ok, im going to test that when I get home, thanks
Jrmb said:
Ok, im going to test that when I get home, thanks
Click to expand...
Click to collapse
The same problem I've had phone then you should re-install the original here bootlogolar download and flash TWRP http://forum.xda-developers.com/gal...-logo-samsung-galaxy-alpha-boot-logo-t3311888 .
Everything worked, thanks guys