I'm having alot or problems in stalling remix OS. Here are my system specs.
Dell dimension desktop Pentium 4 processor 2 GB of RAM. All security in BIOS have been changed to allow the install.
I have tried the following.
Changed USB sticks to a faster write speed.
Used the combos of nomodeset nomodeset=1 nomodeset=0
I also tried a harddisk install for the remix installer i have also tried you unetbootin all fails
I was able to install xubuntu just fine i just can't get Remix to install.
If anyone can think of anything i haven't tried please let me know.
Thanks guys
I get this: failed to find cpu0 device node
that does not stop charging normally, the problem is that when finished loading the OS ANDROID when it should start inicar stays in black.
characteristics of my pc: amd athlon (tm) 64 X2 dual core processor 5200+ 2.70GHz
2gb ram - 6150SE nForce 430 geforce nvidia
Anyone have any suggestions
fanremix said:
I get this: failed to find cpu0 device node
that does not stop charging normally, the problem is that when finished loading the OS ANDROID when it should start inicar stays in black.
characteristics of my pc: amd athlon (tm) 64 X2 dual core processor 5200+ 2.70GHz
2gb ram - 6150SE nForce 430 geforce nvidia
Click to expand...
Click to collapse
You're having a graphic card problem. You need nvidia custom settings to your system boot.
Sent from my XT1095 using Tapatalk
---------- Post added at 19:27 ---------- Previous post was at 19:26 ----------
Tim1928 said:
Anyone have any suggestions
Click to expand...
Click to collapse
You need to explain your issue better. What is your graphic card? What is the error showing? In which part of the installation you get the issue?
Sent from my XT1095 using Tapatalk
lucasdeeiroz said:
You're having a graphic card problem. You need nvidia custom settings to your system boot.
Sent from my XT1095 using Tapatalk
---------- Post added at 19:27 ---------- Previous post was at 19:26 ----------
You need to explain your issue better. What is your graphic card? What is the error showing? In which part of the installation you get the issue?
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
My graphics card is the stock Intel graphics card for the dimension 3000. Using nomodeset gets me to the all the way through the process to where it says Android. I do get a error that says unable to find cpu0 node
Oh and to add in all my attempts I've never made it to the splash screen. I either get a a blank black screen (which when this happens i give it around 20 mins to boot) or i get a flashing cursor in the top left of the screen. I also have this hooked to a 32" TV 720p 60hz refresh rate.
Tim1928 said:
Oh and to add in all my attempts I've never made it to the splash screen. I either get a a blank black screen (which when this happens i give it around 20 mins to boot) or i get a flashing cursor in the top left of the screen. I also have this hooked to a 32" TV 720p 60hz refresh rate.
Click to expand...
Click to collapse
I have a notebook with Intel Graphics 3000 and never had to use custom boot parameters. Did you try to boot without it?
Sent from my XT1095 using Tapatalk
Now that i think about it i haven't since i changed USB sticks I'll try and report back
Thanks
lucasdeeiroz said:
You're having a graphic card problem. You need nvidia custom settings to your system boot.
Sent from my XT1095 using Tapatalk
---------- Post added at 19:27 ---------- Previous post was at 19:26 ----------
You need to explain your issue better. What is your graphic card? What is the error showing? In which part of the installation you get the issue?
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
The system actually have it installed. The problem arises when going to inicar, android logo nor the remix is not displayed, the screen stays black.
At least in this beta version I could install. In the alpha version it remained static in android x86 ......
fanremix said:
The system actually have it installed. The problem arises when going to inicar, android logo nor the remix is not displayed, the screen stays black.
At least in this beta version I could install. In the alpha version it remained static in android x86 ......
Click to expand...
Click to collapse
You need to follow this guide: http://forum.xda-developers.com/showthread.php?t=3328350
Sent from my XT1095 using Tapatalk
lucasdeeiroz said:
You need to follow this guide: http://forum.xda-developers.com/showthread.php?t=3328350
Sent from my XT1095 using Tapatalk[/QUOTE
the end can not solve the problem of black screen. anyway keep on trying until that with the convinacion correct.
or continue to wait in the hope that the project remix in their new versions, you can run it
Thanks for trying to help :fingers-crossed:
Click to expand...
Click to collapse
Related
My allwinner A10 tablet came pre-rooted or so I thought. I installed CWM v6.1.0.2 via the terminal emulator but wasn't able to reboot back to my OS.
I then wiped cache partition and wiped data, it would not allow me to wipe the dalvik cache.
At the end of each process I see:
E:Can't mount /cache/recovery/log
E:Can't mount/cache/recovery/log
Also for /last-log of the two above.
I have got an A10 cm10 rom which I have tried to install via the external sd but no luck.
Any help would be appreciated as I have no clue what I can do next.
Do you know the model or make of your device? What are all of the specs? If you have that information I can probably lead you to a support forum for your device.
I recently recovered my A10 device flashing a .img of a totally different A10 tablet and most of my tablets features work. I tried flashing 100 other .img files and none of those worked correctly.
Where did you get that CWM file? Was it CWM that was specific for A10 devices? You can't just flash any recovery to your device and expect it to work.
Your issue is likely that the CWM is not for your device or it's just having issues with your device. I'm using CWM 6.0.1.1 for Allwinner A10 ICS. I got it onto my device using a simple one click method, but in order for you to use it you have to be on a rom that at least boots up with the display working.
Once you give me information on your device I can try searching for some .img files for you to flash onto your device with Livesuit. If you're lucky enough you'll get one that is specific for your device, if your not so lucky you're going to be breaking your head trying to find a rom that at least boots up with most features working. It's a lesson learned, don't mess with your device unless you have the necessary resources as a backup in the event that something goes wrong.
Hi, thanks for the reply, unfortunately I don't know the make. When it is connected to the PC it shows as BC1077. It came in a completely unmarked box. Here are the specs:
• 10-inch TFT LCD capacitive touch screen
• 1024 x 800 pixels display resolution
• Android 4.0 operating system
• CPU: Allwinner A10 1.5GHz
• RAM: DDR III 1GB
• WiFi: 54Mbps 802.11B/G
• Lan: 10/100M Ethernet Access
• Built-in Micro-SD card slot up to 32GB
• Built-in G-Sensor
• Supports external 3G devices.
• Built-in 1.3 megapixels digital camera
• Built-in 8GB memory
• Plays AVI,RM/ RMVB,FLV,MPG4 - 1,MPEG – 2 video format files
• Plays MP3,WMA,AAC,AC3,WAV audio format files
• Picture browsing of JPEG,BMP,GIF,PNG,TIFF format files
• Built-in 7000mAh Li-poly battery
• 3.5mm earphone socket
• 1 x USB ports
. 1 x Mini USB port
. 1x HDMI port
. Watt speakers
• Android keyboard and Google keyboard input
• Multi-language support
. Battery Life: 6-8 Hours
I got the CWM 6.0.1.2 from here it was meant to be specific to A10's.
Problem is I have no drivers so I cannot see it in windows either.
karlos65 said:
Hi, thanks for the reply, unfortunately I don't know the make. When it is connected to the PC it shows as BC1077. It came in a completely unmarked box. Here are the specs:
• 10-inch TFT LCD capacitive touch screen
• 1024 x 800 pixels display resolution
• Android 4.0 operating system
• CPU: Allwinner A10 1.5GHz
• RAM: DDR III 1GB
• WiFi: 54Mbps 802.11B/G
• Lan: 10/100M Ethernet Access
• Built-in Micro-SD card slot up to 32GB
• Built-in G-Sensor
• Supports external 3G devices.
• Built-in 1.3 megapixels digital camera
• Built-in 8GB memory
• Plays AVI,RM/ RMVB,FLV,MPG4 - 1,MPEG – 2 video format files
• Plays MP3,WMA,AAC,AC3,WAV audio format files
• Picture browsing of JPEG,BMP,GIF,PNG,TIFF format files
• Built-in 7000mAh Li-poly battery
• 3.5mm earphone socket
• 1 x USB ports
. 1 x Mini USB port
. 1x HDMI port
. Watt speakers
• Android keyboard and Google keyboard input
• Multi-language support
. Battery Life: 6-8 Hours
Problem is I have no drivers so I cannot see it in windows either.
Click to expand...
Click to collapse
Okay, if we both search we'll find the device faster.
Go to the following link and try to find your device or a device with similar specs: http://www.slatedroid.com/forum/274-allwinner-a10-cpu-devices/
Android1993 said:
Okay, if we both search we'll find the device faster.
Go to the following link and try to find your device or a device with similar specs: http://www.slatedroid.com/forum/274-allwinner-a10-cpu-devices/
Click to expand...
Click to collapse
Again thanks for the help, where is the spec for all the models on those pages?
karlos65 said:
Again thanks for the help, where is the spec for all the models on those pages?
Click to expand...
Click to collapse
To be honest it's just a long search through each tablets board to find a post that lists the specs. I'm realizing that's a big headache.
I personally just flashed random A10 images onto my device. Nothing bad seemed to happen to my device, but I'm not sure if the same is going to apply to you. If you feel like taking the chance you can just flash some images and cross your fingers hoping it doesn't do anything to your device. When I did it the worst that happened was that the roms either didn't display anything, displayed a static image, display was off center, touch controls didn't work, or got stuck at boot screen, then one finally worked.
I can try to link you to some A10 firmware images and LiveSuitPack if you want to take the chance.
Android1993 said:
To be honest it's just a long search through each tablets board to find a post that lists the specs. I'm realizing that's a big headache.
I personally just flashed random A10 images onto my device. Nothing bad seemed to happen to my device, but I'm not sure if the same is going to apply to you. If you feel like taking the chance you can just flash some images and cross your fingers hoping it doesn't do anything to your device. When I did it the worst that happened was that the roms either didn't display anything, displayed a static image, display was off center, touch controls didn't work, or got stuck at boot screen, then one finally worked.
I can try to link you to some A10 firmware images and LiveSuitPack if you want to take the chance.
Click to expand...
Click to collapse
If I knew how to do it I could persevere trying different images, how easy is it?
karlos65 said:
If I knew how to do it I could persevere trying different images, how easy is it?
Click to expand...
Click to collapse
It's very simple actually.
Here's the LiveSuitPack tool: http://www.topnotchtablets.com/LivesuiteInstall
Here's the guide for installing firmware: http://www.topnotchtablets.com/A10Firmware
In the guide for installing firmware substitute the menu button for volume down button if you don't have a menu button.
There are two firmwares to download on the firmware installation guide page, although I don't think either of those will work at all to begin with. Try them if you'd like. Give me a few minutes to boot into my other partition so I can get all the links of images I bookmarked.
Android1993 said:
It's very simple actually.
Here's the LiveSuitPack tool: http://www.topnotchtablets.com/LivesuiteInstall
Here's the guide for installing firmware: http://www.topnotchtablets.com/A10Firmware
In the guide for installing firmware substitute the menu button for volume down button if you don't have a menu button.
There are two firmwares to download on the firmware installation guide page, although I don't think either of those will work at all to begin with. Try them if you'd like. Give me a few minutes to boot into my other partition so I can get all the links of images I bookmarked.
Click to expand...
Click to collapse
So the drivers are in the folder? for each particular tablet image.
karlos65 said:
So the drivers are in the folder? for each particular tablet image.
Click to expand...
Click to collapse
No, once you download the Livesuitpack you're going to open the folder and run LiveSuitPack_v1.07. That'll install some drivers, or it'll ask you if you want to install some drivers, click Yes. From there you're going to run the LiveSuit application. Then you follow the steps for getting the new firmware onto your device.
EDIT: The drivers that the Livesuitpack installs onto your computer also make your device recognizable in ADB (if you know what that is and ever have a use for it). I also couldn't find drivers for my device for the longest and these seem to work at making your device recognizable across your computer.
---------- Post added at 05:29 PM ---------- Previous post was at 05:25 PM ----------
Firmware:
This is the one that worked on my tablet, doubt it'll work on yours: http://www.ele-china.com/soft/tablet/7inchA10/
This has a good bunch of them: http://www.tikkitoo.com/Firmware-Downloads
Another one I tried: http://androidtabletfirmware.com/firmware_details=MzE5LTEzMzI5MDkxNzAwNzAxNDkyMDU2
This is a forum thread linking to a bunch of websites with firmware for A10 devices: http://www.techknow.t0xic.nl/forum/index.php?topic=3807.0
That's a huge portion of the places I searched and the ones I tried. I'll update the post if I find anymore.
Android1993 said:
No, once you download the Livesuitpack you're going to open the folder and run LiveSuitPack_v1.07. That'll install some drivers, or it'll ask you if you want to install some drivers, click Yes. From there you're going to run the LiveSuit application. Then you follow the steps for getting the new firmware onto your device.
---------- Post added at 05:29 PM ---------- Previous post was at 05:25 PM ----------
Firmware:
This is the one that worked on my tablet, doubt it'll work on yours: http://www.ele-china.com/soft/tablet/7inchA10/
This has a good bunch of them: http://www.tikkitoo.com/Firmware-Downloads
Another one I tried: http://androidtabletfirmware.com/firmware_details=MzE5LTEzMzI5MDkxNzAwNzAxNDkyMDU2
This is a forum thread linking to a bunch of websites with firmware for A10 devices: http://www.techknow.t0xic.nl/forum/index.php?topic=3807.0
That's a huge portion of the places I searched and the ones I tried. I'll update the post if I find anymore.
Click to expand...
Click to collapse
I can't thank you enough for your help.
I will update here on any progress I make.
Once again many thanks, karma owes you one.
karlos65 said:
I can't thank you enough for your help.
I will update here on any progress I make.
Once again many thanks, karma owes you one.
Click to expand...
Click to collapse
No need to thank anymore than you already have. I've been helped around here plenty of times by some sincere people. It's all about giving back what you receive. I hope everything goes well with your tablet as it did mine, and be careful, don't want anything getting messed up on you. Good luck.
Android1993 said:
No need to thank anymore than you already have. I've been helped around here plenty of times by some sincere people. It's all about giving back what you receive. I hope everything goes well with your tablet as it did mine, and be careful, don't want anything getting messed up on you. Good luck.
Click to expand...
Click to collapse
No luck so far, I flashed one image which gave me a sort of cracked looking screen affect, other images I have tried to flash do not make it to 100%?
I am not sure if I have now completely bricked it?
I am still looking for images that closely match my pad and will try again this evening.
karlos65 said:
No luck so far, I flashed one image which gave me a sort of cracked looking screen affect, other images I have tried to flash do not make it to 100%?
I am not sure if I have now completely bricked it?
I am still looking for images that closely match my pad and will try again this evening.
Click to expand...
Click to collapse
Your device shouldn't brick. I believe A10 devices have all necessary code in the chip itself, or something along those lines. The cracked looking screen effect means that it isn't compatible with your device, I came across plenty of roms that did that to my device, all you do if flash the next image.
I haven't come across any issues with it not getting to 100%. I can only suggest you retry it, or move on to the next image.
karlos65 said:
My allwinner A10 tablet came pre-rooted or so I thought. I installed CWM v6.1.0.2 via the terminal emulator but wasn't able to reboot back to my OS.
I then wiped cache partition and wiped data, it would not allow me to wipe the dalvik cache.
At the end of each process I see:
E:Can't mount /cache/recovery/log
E:Can't mount/cache/recovery/log
Also for /last-log of the two above.
I have got an A10 cm10 rom which I have tried to install via the external sd but no luck.
Any help would be appreciated as I have no clue what I can do next.
Click to expand...
Click to collapse
Iv got similar problems with my BC1077. Iv been trying to fix it for the last few days. Im not 100% sure, but I think the problem Iv quoted above is that CWM does not support jellybean, so it wont work with cm10, which is jellybean.
Over the last few days Iv flashed 40+ A10 firmwares to my tablet, but Iv only found 1 that installs properly and boots for me. It actually works pretty well, only major issue iv noticed is auto rotate doesnt work. But this same working firmware is also jellybean, after I install CWM I get bootloops and have to reflash the firmware again to boot.
Heres a link to the firmware that works for my BC1077 - http://www.ssb-repair.com/Firmwares/Cherry/M1007_20121217.zip
Its for a completly different tablet (Cherry Mobility - M007), but like I said it works on mine.
Heres another firmware it might be worth you trying to flash, its the only BC1007 specific firmware Iv found, but it wont install on my tablet, I always get a 0x162 error from it. Heres the link - http://www.pandawillforum.com/soft/mate sku20314 firmware for May 25 stock.rar
Good luck, let us know if you make any progress.
I think I might have been flashing with a very low battery, if a flash was unsuccessful halfway through would this not brick the tablet.
I am not getting any kind of response from the screen at all and when I try to flash although the drivers appear to load the % bar doesn't go up.
col888 said:
Iv got similar problems with my BC1077. Iv been trying to fix it for the last few days. Im not 100% sure, but I think the problem Iv quoted above is that CWM does not support jellybean, so it wont work with cm10, which is jellybean.
Over the last few days Iv flashed 40+ A10 firmwares to my tablet, but Iv only found 1 that installs properly and boots for me. It actually works pretty well, only major issue iv noticed is auto rotate doesnt work. But this same working firmware is also jellybean, after I install CWM I get bootloops and have to reflash the firmware again to boot.
Heres a link to the firmware that works for my BC1077 - http://www.ssb-repair.com/Firmwares/Cherry/M1007_20121217.zip
Its for a completly different tablet (Cherry Mobility - M007), but like I said it works on mine.
Heres another firmware it might be worth you trying to flash, its the only BC1007 specific firmware Iv found, but it wont install on my tablet, I always get a 0x162 error from it. Heres the link - http://www.pandawillforum.com/soft/mate sku20314 firmware for May 25 stock.rar
Good luck, let us know if you make any progress.
Click to expand...
Click to collapse
Thanks for that, I will try tonight and get back.
OK, regardless of the image I try to flash the livesuit progress bar gets to 3% and then goes back to 0% and then nothing.
Anyone?
If the battery was low and the flashing process didn't finish all you have to do is load up the exact image that didn't finish flashing into LiveSuit and put your tablet into download mode and let it do its thing. I had the same problem and got scared my tablet was bricked, so I just did the process I stated above and it finished. It wouldn't allow me to flash another rom, I'd get the little Livesuit pop up that you get after a rom successfully flashes, so if that's the same pop up you're getting don't be alarmed.
karlos65 said:
I think I might have been flashing with a very low battery, if a flash was unsuccessful halfway through would this not brick the tablet.
I am not getting any kind of response from the screen at all and when I try to flash although the drivers appear to load the % bar doesn't go up.
Click to expand...
Click to collapse
I dont think your tablet is bricked, if it was I doubt it would respond to Live Suite or PheonixUSB pro at all. From what Iv read about the A10 its meant to be unbrickable.
What error codes does live suite/pheonixUSB give you when they stop?
if youre getting 0x120 and 0x162 errors, just keep trying more firmwares out till you find one that will install without errors.
Theres loads of A10 Allwinner firmwares at this link - http://androidtabletfirmware.com/firmware_search/order=2/sort=1
OK so i have searched everywhere for days. Tried tons of kindle unlock/unbrick tools including the Kindle Fire Utility. I rooted my Kindle fire HD7 (no sd card slot) using kingroot and twrp. at some point i used a utility that also put SuperSU on it. Everything seemed successful and i rebooted several times tweaking other settings, when i was almost finished tweaking i tried to remove kingsroot and rebooted which put me into some kind of boot loot. I only see the white AMAZON (arrow under the word AMAZON) logo it only stays up for about 15 secs then goes black and starts over. All the unbrick tools i have tried either say can't find device and fail or say <waiting for device> and are never able to find it. I have installed new signed kindle device drives successfully, android SDK with kindle fire drivers and google usb drivers. Windows device manager does show an Other device (with accompanying ding dong sound) > MTX65xx Preloader for about 5 secs then it disappears, the kindle never shows up as a drive thou. I ordered and am using a Fastboot cable that i ordered from amazon as well as a samsung galaxy usb cable which seems to have no effect. Ive tried using it in usb 2.0 slot as well as 3.0 (which they say won't work) The cable is from Atomic Market (3ft Motorola Factory Cable unbrick Droid Xoom Fire).
I also tried loading linux Ubunto via USB and running all unbrick tools i could find, always the same result .. they can't find device or waiting for device.
Windows 7 and Windows 10 same problem
Does anyone know how to help me? every article or guide i find talks about the kindle Fire logo that is orange and white or blue and white i never see either anymore (mine used to be orange and white)with an animation or without. or a triangle... i have not read one article that talks about the white amazon logo.
Thank you,
Mnfire
You have tried holding Power and Volume-up buttons to see if you can boot to recovery? If that doesn't work, you are unrecoverably hard-bricked and just wearing yourself out trying methods designed for other devices:
* Fastboot cable doesn't work with Fire HD.
* There's no unbricking tool for the Fire HD
If still under warranty, contact Amazon for replacement. If not under warranty, used Fire HDs are going for as low as $30: http://www.amazon.com/gp/offer-list...iguration=all&mv_digital_storage_capacity=all
DoLooper said:
You have tried holding Power and Volume-up buttons to see if you can boot to recovery? If that doesn't work, you are unrecoverably hard-bricked and just wearing yourself out trying methods designed for other devices:
* Fastboot cable doesn't work with Fire HD.
* There's no unbricking tool for the Fire HD
If still under warranty, contact Amazon for replacement. If not under warranty, used Fire HDs are going for as low as $30: http://www.amazon.com/gp/offer-list...iguration=all&mv_digital_storage_capacity=all
Click to expand...
Click to collapse
Boss, are you sure the fastboot cable wont work with the fire HD 6 / 7 ?
if you are 100% sure of this I will stop right now looking for a way to fix mine, which is stuck at recovery.
yurais said:
Boss, are you sure the fastboot cable wont work with the fire HD 6 / 7 ?
if you are 100% sure of this I will stop right now looking for a way to fix mine, which is stuck at recovery.
Click to expand...
Click to collapse
100% sure. If you're stuck at OS 4 recovery (no adb sideload option), it can't be fixed.
DoLooper said:
100% sure. If you're stuck at OS 4 recovery (no adb sideload option), it can't be fixed.
Click to expand...
Click to collapse
Piggy backing on this thread, mine goes past the amazon then to the glowing fire logo. I do adb devices and its says it's offline. Can this be fixed?
Sent from my KFFOWI using Tapatalk
twinturbor said:
Piggy backing on this thread, mine goes past the amazon then to the glowing fire logo. I do adb devices and its says it's offline. Can this be fixed?
Click to expand...
Click to collapse
Doubt it. These devices are almost unfixable if you can't get to the OS, TWRP or OS 5 recovery. It's kind of weird that you get anything from adb devices mid-boot. Exact condition producing "offline" slips my mind atm, but I think it just means you're, uh, offline--not booted. You could see what device manager shows and search for offline.
DoLooper said:
100% sure. If you're stuck at OS 4 recovery (no adb sideload option), it can't be fixed.
Click to expand...
Click to collapse
dont wanna be a fly in the milk, but are you sure this procedure will not work:
http://www.ebay.com/gds/How-to-fix-or-root-Amazon-Kindle-Fire-HD-7-HD-8-9-/10000000176942274/g.html
they also say the hd6 and hd7 are the same thing
yurais said:
dont wanna be a fly in the milk, but are you sure this procedure will not work:
http://www.ebay.com/gds/How-to-fix-or-root-Amazon-Kindle-Fire-HD-7-HD-8-9-/10000000176942274/g.html
they also say the hd6 and hd7 are the same thing
Click to expand...
Click to collapse
Look, all I know is what little I know. You are welcome to try anything. Sometimes people strike luck! But why would want to use a procedure for a 2012 device that has fastboot capability on a 2014 device that doesn't? Believe me, I understand desperation (been there!), but I have yet to see anyone fix a Fire HD with a method designed for a different device.
This thread discussion seems to be hd7 not hd
Enviado desde mi One mediante Tapatalk
yurais said:
This thread discussion seems to be hd7 not hd
Click to expand...
Click to collapse
Problem is, there are 3 (4?) years of HD 7s and they're all HDs, right? :laugh: This thread, and forum, is for the 2014 Fire HD 6 and 7 tablets (4th gen). Pretty sure that the OP and everyone who's posted are using that device. But . . .
Anyone who's unsure what Amazon tablet they have, should check @sd_shadow's fine index here: http://forum.xda-developers.com/fire-hd/general/index-fire-hd-6-7-2014-t3206774
DoLooper said:
Problem is, there are 3 (4?) years of HD 7s and they're all HDs, right? :laugh: This thread, and forum, is for the 2014 Fire HD 6 and 7 tablets (4th gen). Pretty sure that the OP and everyone who's posted are using that device. But . . .
Anyone who's unsure what Amazon tablet they have, should check @sd_shadow's fine index here: http://forum.xda-developers.com/fire-hd/general/index-fire-hd-6-7-2014-t3206774
Click to expand...
Click to collapse
I give up...
I cant find anything for this tablet, model PW98VM, every time I think I found something then something sends me ages back again, I cant with this.
same problem here!. i bricked my device. i disassembly the battery and i connected to my pc. mtk65xx not disappearing anymore!
pls dont give up we can do it!
I gave up, returned the tablet to customer. Never found driver for that preloader
Enviado desde mi SM-N920T mediante Tapatalk
---------- Post added at 01:43 PM ---------- Previous post was at 01:42 PM ----------
Try to manually force soccer installation with android mtk drivers.
Enviado desde mi SM-N920T mediante Tapatalk
Hello.
I can't boot into remix OS, no matter what type of installation or mode(Guest or resident) I use. It always gets stuck at black screen with white "_" in upper left corner.
It's a laptop, Aspire One 725-0899 with an AMD C-60 (I know, pure sh*t) processor. I downloaded x86 version because it's the recommended one for my processor. Currently I'm running Win 7 x64 on it. It's weird why remix os cannot boot. I tried downloading android-x86 and it works, but I'd really like to try out remix os. My bios is legacy, i'm pretty sure.
Android-x86 boots when installed on HDD with a bit of troubleshooting, but Remix OS won't boot into either mode( Guest or Resident) no matter if install it on HDD or 3.0 USB and use a USB 3.0 port. Any ideas?
What do you mean, you can't boot? Do you see the root prompt coming up? Do you see the RemixOS boot animation at all?
Sent from my iPhone using Tapatalk
putr4s said:
What do you mean, you can't boot? Do you see the root prompt coming up? Do you see the RemixOS boot animation at all?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Maybe I should note that my write speed is pretty low, somewhere around 11 MB/s. Alright, take this video as an example: https://www.youtube.com/watch?v=XU6LOBz_XtA
For me, the booting is stuck on 1:19 , on the black screen between 1:18 and 1:20 where the Android-x86 logo shows up. If you watch very carefully from 1:17 to 1:20, you will notice a "_" in upper left corner somewhere at 1:19(maybe a tiny, tiny bit earlier in the video). That's where I'm stuck. What should I do? If android-x86 can boot on my PC, why can't Remix OS?
Hi guys,
Due to having installed some custom AMD driver (hehe ;D) on my acer aspire i thought "well, i think it has sth. to do with my graphic card".
Therefore i changed the graphic card setting under the bios menu (f2 on my laptop) from "switchable" to "discrete" or sth. like that and my problem got fixed .
I hope this helps you/other people, too .
putr4s said:
What do you mean, you can't boot? Do you see the root prompt coming up? Do you see the RemixOS boot animation at all?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Me too faciing this issue. Can see only root prompt. Can't go beyond that.
http://forum.xda-developers.com/showpost.php?p=67364587&postcount=160
Laz said:
Me too faciing this issue. Can see only root prompt. Can't go beyond that.
http://forum.xda-developers.com/showpost.php?p=67364587&postcount=160
Click to expand...
Click to collapse
Try adding "nouveau.modeset=0" (without quotes) to the end of the kernel ... line in the menu.lst file inside the RemixOS folder.
Sent from my iPhone using Tapatalk
Same problem exists
Hi guys,
I really like Remix os a lot so i was thinking to make it my main os on a older laptop i own.
I searched the internet a lot but it seems every talks about dual booting.
So my logic was: lets dual boot Remix-Windows and then delete Windows.
So far so good but after rebooting my device there was no os found.
So now i am searching for the Missing link in getting this to work.
Hope you guys can Help me out.
Burn ISO to usb, boot then press TAB and use INSTALL=1, after this complete installation as android x86
YSH ALSAGER said:
Burn ISO to usb, boot then press TAB and use INSTALL=1, after this complete installation as android x86
Click to expand...
Click to collapse
i did this but this results in a non bootable device found.
i was thinking maybe there is more to it.
locomain said:
i did this but this results in a non bootable device found.
i was thinking maybe there is more to it.
Click to expand...
Click to collapse
Maybe you forgot to make bootable partition
http://brunoalvieira.blogspot.com.eg/2016/02/analise-android-x86-marshmallow.html
World first recovery flashable ROM for android TV boxes!
WARNING: This rom is under heavy development. There are bugs, bootloops and internal issues.
STRICTLY A DEVELOPMENT THREAD.
For a stable rom check out PoisonRom
A lot of effort and research was put into this device and will be put into the Amlogic ROM tool(A tool for creating roms for Amlogic devices(any android version)) so consider making a donation to me or buying me a beer by clicking on my name a clicking the "Donate to me" button!
Our TV Boxes are finally treated like standard android devices from this point on!
So here it is, this ROM is for the T95Z Plus 2/16GB variant, its stock 7.1.2(not 7.1.1) ported from the 3/32GB variant!
MAKE SURE YOU HAVE THE TWRP RECOVERY!
Here are instructions to install TWRP if you havent already.
Recovery
So far we have a working recovery(TWRP) thanks to @rrvuhpg
You can download it from HERE for the 2/16GB T95Z variant(Mirrored and renamed custom-recovery.img for the sake of flashing instructions)
Flash instructions
1. Download ADB and install it on your pc(not explaining this, there are 5 second installers) then open a command prompt in the directory of the custom recovery
2. Enable USB debugging, go to settings>about and click build number about 10 times, then go back to the main settings menu and you will see developer options, enter it and check allow USB debugging.
3. Connect to your device via IP address. go to settings>about>status and get your IP address. it should be something like 192.168.25.19
4. In CMD type the following commands, replace YOURIPADDRESS with the address we got from step 3
Code:
adb connect YOURIPADDRESS
adb push custom-recovery.img /sdcard/
adb shell su -c dd if=/sdcard/custom-recovery.img of=/dev/block/recovery
adb reboot recovery
ROM
Instructions:
1. Download the 2_16GB_7.1.2.zip from HERE
and put it on a usb stick.
2. Reboot into recovery(not explaining this)
3. Go to mount and mount USB-OTG
4. Go back to the main menu and select install, then choose the 2_16GB_7.1.2.zip and swipe to install!
Reboot and enjoy!
NOTE: Remember to make a backup in recovery before flashing!
XDA:DevDB Information
T95Z Plus Stock 7.1.2 2/16GB Ported from 3/32GB, ROM for the Android Stick & Console Computers
Contributors
Ricky Divjakovski, whiteak
ROM OS Version: 7.x Nougat
Version Information
Status: Testing
Created 2018-02-05
Last Updated 2018-02-19
So witch wifi module is support?.
Will be work on sunvell t95k pro 2/16gb and LTM8830 wifi module?
rumunn95 said:
So witch wifi module is support?.
Will be work on sunvell t95k pro 2/16gb and LTM8830 wifi module?
Click to expand...
Click to collapse
Wifi module is not a factor anymore.
Aslong as your device is 2/16GB this could possibly work.
great to hear this i will be testing
I had no PC around (at least not in the same ip-range
So, i installed the Flashify app and used that instead...works great! So now i have TWRP 'loaded' i will give it a go in a few minutes....#fingerscrossed #yeah
Well...no USB-stick or microsdcard laying around at the moment and i also use 1 usb port for power and the other for remote control. So I ended up downloading the ROM directly to my T95Zplus.....no errore during flashing, wiped cache/dalvik and rebooting right now and so far so good...!
ZeroZorro said:
I had no PC around (at least not in the same ip-range
So, i installed the Flashify app and used that instead...works great! So now i have TWRP 'loaded' i will give it a go in a few minutes....#fingerscrossed #yeah
Well...no USB-stick or microsdcard laying around at the moment and i also use 1 usb port for power and the other for remote control. So I ended up downloading the ROM directly to my T95Zplus.....no errore during flashing, wiped cache/dalvik and rebooting right now and so far so good...!
Click to expand...
Click to collapse
Well...that did not work....rebooted and after 15 minutes still nothing except the boot-screen (and before that animation)...so gonna try to figure out what went wrong...
So be warned if you are gonna try it like i did and not following OP to the letter!
Sent from my Z1 PRO using Tapatalk
ZeroZorro said:
Well...that did not work....rebooted and after 15 minutes still nothing except the boot-screen (and before that animation)...so gonna try to figure out what went wrong...
So be warned if you are gonna try it like i did and not following OP to the letter!
Sent from my Z1 PRO using Tapatalk
Click to expand...
Click to collapse
Quite odd, if you flashed the rom in recovery, it should have worked :/
I did find a bug though, endless reboot if you try connecting wifi
So it's canned now
Ricky Divjakovski said:
...I did find a bug though, endless reboot if you try connecting wifi
So it's canned now
Click to expand...
Click to collapse
I didn't get a boot loop; however, attempt to activate wifi resulted in wifi switch button moving to on position and after ~3 seconds returning to the off position. Is it possible this needs to be debugged on a per-wireless-chipset basis? I'm on 8830 q201_6255....
Please advise and let me know if I can help out with logs, etc.
Thanks
LAX_2_TLV said:
I didn't get a boot loop; however, attempt to activate wifi resulted in wifi switch button moving to on position and after ~3 seconds returning to the off position. Is it possible this needs to be debugged on a per-wireless-chipset basis? I'm on 8830....
Please advise and let me know if I can help out with logs, etc.
Thanks
Click to expand...
Click to collapse
From which firmware did you flash?
I don't know if partitions are different sizes and maybe that did trigger the bootloop? I come from goo.gl/hWrmxY (Android 7.1.1 with root, 1013) and that did not work so far...
Sent from my Z1 PRO using Tapatalk
ZeroZorro said:
From which firmware did you flash?
I don't know if partitions are different sizes and maybe that did trigger the bootloop? I come from goo.gl/hWrmxY (Android 7.1.1 with root, 1013) and that did not work so far...
Sent from my Z1 PRO using Tapatalk
Click to expand...
Click to collapse
I flashed on top of stock 1013 rooted with magisk
LAX_2_TLV said:
I flashed on top of stock 1013 rooted with magisk
Click to expand...
Click to collapse
Well...gave it another shot. Flashed 1013 ROM with USB Card Maker. Flashed TWRP and after that this ROM. Same issue....
Sent from my Z1 PRO using Tapatalk
ZeroZorro said:
Well...gave it another shot. Flashed 1013 ROM with USB Card Maker. Flashed TWRP and after that this ROM. Same issue....
Sent from my Z1 PRO using Tapatalk
Click to expand...
Click to collapse
Im gonna update it tonight, ill need someone to PM me, im gonna need someone to test as i dont have my TV box with me and im away on buisness, i think i have found the wifi bug, but as you can tell with the ROM ram usage is ALOT less, framework is much smoother and alot of apps have been updated from the manufacturer
Ill also be basing it on the newest build 1075(Or if anyone has a newer build PM me)
This rom will be pretty stock with more features implemented and possibly some apps i might make ffor the device
Ricky Divjakovski said:
Im gonna update it tonight, ill need someone to PM me, im gonna need someone to test as i dont have my TV box with me and im away on buisness, i think i have found the wifi bug, but as you can tell with the ROM ram usage is ALOT less, framework is much smoother and alot of apps have been updated from the manufacturer
Ill also be basing it on the newest build 1075(Or if anyone has a newer build PM me)
This rom will be pretty stock with more features implemented and possibly some apps i might make ffor the device
Click to expand...
Click to collapse
Hi and thanks a lot for works.
i flashed my 3gb/32gb variant with a 2gb/16gb rom and it's done. but if i setup my wifi in a few seconds the startup animation appears on the screen and hang during animation.
When i start the set top box with lan cable inside, it's hang at the end of start animation and stay on T95z plus logo with the space behind but without any network it's start and the launcher appear...
can you put in the HDMI section in setting menu ? to have the CEC support?
papla83 said:
Hi and thanks a lot for works.
i flashed my 3gb/32gb variant with a 2gb/16gb rom and it's done. but if i setup my wifi in a few seconds the startup animation appears on the screen and hang during animation.
When i start the set top box with lan cable inside, it's hang at the end of start animation and stay on T95z plus logo with the space behind but without any network it's start and the launcher appear...
can you put in the HDMI section in setting menu ? to have the CEC support?
Click to expand...
Click to collapse
yes thats a bug, this is mean for 2/16GB variants, this is exactly like stock 7.1.2, if you have 3/32GB variant flash stock 7.1.2(build 1075)
Ricky Divjakovski said:
yes thats a bug, this is mean for 2/16GB variants, this is exactly like stock 7.1.2, if you have 3/32GB variant flash stock 7.1.2(build 1075)
Click to expand...
Click to collapse
if i flash it with the 3gb/32gb rom version the box doesn't boot. the 1075 is for 32gb and i allready tried with no success.
papla83 said:
Hi and thanks a lot for works.
i flashed my 3gb/32gb variant with a 2gb/16gb rom and it's done. but if i setup my wifi in a few seconds the startup animation appears on the screen and hang during animation.
When i start the set top box with lan cable inside, it's hang at the end of start animation and stay on T95z plus logo with the space behind but without any network it's start and the launcher appear...
can you put in the HDMI section in setting menu ? to have the CEC support?
Click to expand...
Click to collapse
The CEC support is found under Droid Settings in apps mate.
whiteak said:
The CEC support is found under Droid Settings in apps mate.
Click to expand...
Click to collapse
OK. Thanks. I'm waiting for an solution about the connection trouble.
Maybe you can consider to bake a little reboot app (i use Simple Reboot) into the ROM cause it makes it much easier to test and restore/backup especially when there is no internet with this ROM at the moment.
For now I have some apk's ready on a sdcard so I will get there but would make things a little easier...
ZeroZorro said:
Maybe you can consider to bake a little reboot app (i use Simple Reboot) into the ROM cause it makes it much easier to test and restore/backup especially when there is no internet with this ROM at the moment.
For now I have some apk's ready on a sdcard so I will get there but would make things a little easier...
Click to expand...
Click to collapse
will do!
adb connect not working
Hi,
Thank you very much for all your effort Ricky. I have T95Z Plus 2/16 variatnt. I am unable to connect to my TV box using adb. I have USB debugging enabled on my TV box. The TV box and my Mac from where I am trying to run adb commands are on the same wifi network. I have tried connecting my TV box to my Mac using USB cable but still adb connection fails with error "Host is down" and sometimes "Operation timed out".
I cannot proceed further without this step. Any help is much appreciated.
Apart from adb, can I copy the files into SD card or USB drive and install it? If so, what will be the steps?
Thanks again!