Related
steps i took:
-began with 1.6
-flashed 2.1
-"restored" bluesparks
-formatted and installed wolfbreak's cm6
-rom is very nice, but my radio is not working AT ALL ( wifi and calling i mean)
- reflashed baseband 55 , didnt help
- stuck with nice x10 pod touch since no calling or wifi
Try to fix wifi with blade wifi fix from market... it helps mostly
and your network...its a strange problem...maybe few restarts? Or flash. 54 bb...
on the rom it says my baseband version is "Unknown"
You may need to setup your APN, check here for some details.
Or try this -> http://forum.xda-developers.com/showthread.php?t=995226
Markolic said:
on the rom it says my baseband version is "Unknown"
Click to expand...
Click to collapse
are you sure you flashed to .55 cause there is a x10i and x10a .55 works only with x10a
and if it says unknown wait for a while it takes about 10-20mins to become stable
thank me if you found it helpful
Go here, dev tools , bad behavior, click crash system server and wait for it to reboot. After reboot you have network.
Sent from my X10i using XDA Premium App
x10b said:
Go here, dev tools , bad behavior, click crash system server and wait for it to reboot. After reboot you have network.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
Yep, that should work, i forgot
Hekp with wifi
Can someone help me?
I've installed wolfbreak's rom http://forum.xda-developers.com/showthread.php?t=945264
it works like a charm but:
I have only problem with my wifi,it search for connectionsmthen i put the wep key and says connecting,obtaining ip address,then the wifi deactivate,an activate by itself an going in a constant loop.
I've tried wifi fix and other apks from the market but none of them fixed the problem.
Suggestions????
hi,
I was looking for ad hoc wireless support in lg p500 as i am using win xp and it only supports ad hoc sharing mode........
I search alot and got something
forum.xda-developers.com/showthread.php?p=21319026
to enable wifi ad hoc connectivity and visibility by changing wpa-supplicant from system/bin and after changing it I am able to see and connect to the ad-hoc network but no data transferring,
Can any one help me regarding this I will be really very helpful
THANK YOU
i was using a usb modem and its third party software to connect it to the internet
now i created a new dial up connection and shared it now its working
thanks to all the people who helped me
well, I use this file (see attachment) and everything works fine.
not working
creativegeek said:
well, I use this file (see attachment) and everything works fine.
Click to expand...
Click to collapse
no bro not working for me i am using android 2.3.3 stock and win xp home edition sp3 and creating ad-hoc via connectify 3.3.0.23104 pro
only it is connecting but no data transferring...............
Install the wifiadhocenabler app from market, this works perfectly on my O1
Sent from my LG-P500 using Tapatalk 2 Beta-5
ramblaklash said:
Install the wifiadhocenabler app from market, this works perfectly on my O1
Sent from my LG-P500 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
wow I didn't know there was an app like this before, thanks
not working i am not able to sort out
this things are working fot the people but for me only connecting no data transferring i am not able to sort out why
irbaaz said:
this things are working fot the people but for me only connecting no data transferring i am not able to sort out why
Click to expand...
Click to collapse
I was able to connect to an open ad-hoc network using wifi ad-hoc enabler in Oxygen ROM. I did a backup jst bfore installing the enabler and restarted. Everything was FC ing. But, I installed wifi enabler and it was working. As almost every app is FC ing, I installed CM 7.2 RC1 and tried wifi enabler. It was not working in CM for me .It shows the network but unable to connect
messi4lyf said:
I was able to connect to an open ad-hoc network using wifi ad-hoc enabler in Oxygen ROM. I did a backup jst bfore installing the enabler and restarted. Everything was FC ing. But, I installed wifi enabler and it was working. As almost every app is FC ing, I installed CM 7.2 RC1 and tried wifi enabler. It was not working in CM for me .It shows the network but unable to connect
Click to expand...
Click to collapse
Bro we are usin gb stock rom not any unofficial rom but than also it must work try some another rom maybe the rom is not compitable with the edited wpa_suplicant
Sent from my LG-P500 using xda premium
irbaaz said:
Bro we are usin gb stock rom not any unofficial rom but than also it must work try some another rom maybe the rom is not compitable with the edited wpa_suplicant
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
ROM compatibility might be the issue...
I guess, its time to revert back to stock bcoz of frustrating, yet silly issues in custom ones
Hi guys,
each and every update I am running in the same problem, getting the WIFI to stop working with my companies Cisco LEAP.
Today I updated to Stock XLS8 JB 4.1.2 and WIFI is returning an authentication error.
I recreated the LEAP profile using the Leap Wifi Free app.
Last time I needed to patch the wpa_supplicant binary to get it working.
I also found some threads and also android bugs pointing to it (but this states it should work in 4.1.2 but not on 4.2: android issue #40023).
Do you have the same problems? Do you have a solution?
thanks
Christian
PS: Sorry if this topic is not new, search is currently not working.
Can't believe I am the only one
I have it too.
I was on jellybean LSJ & it was working as it should. as soon as I updated to LS8 it stopped working.
I too get Authentication Error. Could connect when on 4.03, but not since update to JB.
Sent from my Samsung GT-i9100M
ROM NeatRom Lite 4.2 XWLS8
Kernel Philz 4.00b22
Mods 23 toggles blue
AW: [Q] Leap Wifi not working - authentication error (JB 4.1.2 XLS8)
Good hint with the lsj.... Maybe i will give it a try and Patch the wpa_supplicant from that build for testing...
Sent mobile. Regrets for typing errors.
one question to you Hibbbo... can your phone roam between multiple ap?
Hibbbo said:
Good hint with the lsj.... Maybe i will give it a try and Patch the wpa_supplicant from that build for testing...
Sent mobile. Regrets for typing errors.
Click to expand...
Click to collapse
I also tried 2 custom roms based on LS8. Alliance v6 & Biftor v5. they both have the same problem. plus, I tried to change the modem but still the same.
I'm pretty sure it's related to the base itself not roms nor modems or even phones.
never had this problem before.
AW: [Q] Leap Wifi not working - authentication error (JB 4.1.2 XLS8)
Did You also try to change the wpa_supplicant binary?
Sent mobile. Regrets for typing errors.
Hibbbo said:
Did You also try to change the wpa_supplicant binary?
Sent mobile. Regrets for typing errors.
Click to expand...
Click to collapse
I dont know anything about these stuff.
but i tried formatting & wiping stuff. nothing worked.
only stock rom is left to try.
what was your rom ? stock ?
AW: [Q] Leap Wifi not working - authentication error (JB 4.1.2 XLS8)
Yes its Stock.... If i have time i will try tomorrow..
Sent mobile. Regrets for typing errors.
Hibbbo said:
Yes its Stock.... If i have time i will try tomorrow..
Sent mobile. Regrets for typing errors.
Click to expand...
Click to collapse
I'm downloading the stock to try it
should I cancel ??
EDIT:
I tried to replace WPA supplicant of LS8 with LSJ file
didnt work :S
I FIXED MY WIFI PROBLEM !!!!!!!!
FINALLY !
looks like wifi files are bugged in LS8. I took a backup of the folder etc/wifi in LSJ and replaced with the same files in LS8 & IT WORKED IMMEDIATELY !
make sure the files are really put. it might not replace the old files
khaled_7 said:
I FIXED MY WIFI PROBLEM !!!!!!!!
FINALLY !
looks like wifi files are bugged in LS8. I took a backup of the folder etc/wifi in LSJ and replaced with the same files in LS8 & IT WORKED IMMEDIATELY !
make sure the files are really put. it might not replace the old files
Click to expand...
Click to collapse
Hi,
great to hear! Would be also great if you could share the LSJ /etc/wifi folder with everybody
Yes, its working with LSJ!
here are the etc/wifi files of this ROM, to be honest, I dont know how to create a CWM update.zip... maybe somebody may assist.
I changed it with Android Commander. Before that, check that /system is mounted rw
mount | grep system
mount -o rw,remount /system
hey mate. I'm reeeeeally sorry for coming so late but I've been busy.
glad that it worked for you. is there anything else ??
But its not working for me... could u explain in detail ? I replaced system/etc/wifi with lsj wifi but it doesn't work...
Sent from my GT-I9100 using xda app-developers app
ran816 said:
But its not working for me... could u explain in detail ? I replaced system/etc/wifi with lsj wifi but it doesn't work...
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
make sure they replaced the files of LS8
turn the wifi off then on. it should work. if there isn't another problem somewhere else.
Wifi Auth Error
Hi, just tried replacing the wifi files on my Omega 19.2 rom and no effect, which kernel are you using on your LS8?
Regards
JoeSenki said:
Hi, just tried replacing the wifi files on my Omega 19.2 rom and no effect, which kernel are you using on your LS8?
Regards
Click to expand...
Click to collapse
Doesn't depend on kernels. I tried all of them.
only on this wifi folder. make sure the files REALLY replaced LS8 files. turn offf/on. wifi should work. unless you have a problem somewhere else which is the router. try resetting the router
I'M USING OMEGA 19.2 TOO
I asked that because my wifi button was frozen after replacing those files and i couldn't enable the wifi back, even restoring a directory backup, so i had to reinstall the rom, now, i upgraded to a clean install omega 20 with siyah 6b4 and the wifi problem persist. :/
khaled_7 said:
Doesn't depend on kernels. I tried all of them.
only on this wifi folder. make sure the files REALLY replaced LS8 files. turn offf/on. wifi should work. unless you have a problem somewhere else which is the router. try resetting the router
I'M USING OMEGA 19.2 TOO
Click to expand...
Click to collapse
I Installed CM 10 Everything running except wifi when i connect it works and there is a signal but when i browse or open whatsapp or play store there is no internet what is this ??!!
What kernel are you using?
Eslam1911 said:
I Installed CM 10 Everything running except wifi when i connect it works and there is a signal but when i browse or open whatsapp or play store there is no internet what is this ??!!
Click to expand...
Click to collapse
Hey !
try reflashing the rom again and kernel.
It maybe a bad flash
You can give more info though... like.
1.what kernel do you have?
2.in what method you flashed.
please hit 'thanks' if i helped
.
Eslam1911 said:
I Installed CM 10 Everything running except wifi when i connect it works and there is a signal but when i browse or open whatsapp or play store there is no internet what is this ??!!
Click to expand...
Click to collapse
Flash the Wifi Modules
hey guys,
so recently i decided to flash one of the many S5 ROMs that are now available to the s3, after wiping my phone i found that the wifi would not connect, i'd put the password in then it would just say "saved, secured".. ive downloaded several similar ROMs since then only to run into the same problem every time.. all the other features work fine its just the wifi, which is quiet essential..
i live in new zealand and have an i9300T..
thanks to anyone who can help me out as i really like the S5 software!
Go to data folder of your device by using any root explorer and create a file name it .cid.info enter in that file and edit and type murata in it.
Change permissions to rw-rw-r and reboot.
Press thanx if i helped you in anyway...
kunal1540 said:
Go to data folder of your device by using any root explorer and create a file name it .cid.info enter in that file and edit and type murata in it.
Change permissions to rw-rw-r and reboot.
Press thanx if i helped you in anyway...
Click to expand...
Click to collapse
WOW, read so many posts about this problem, was about to go back to non kit kat roms, until I found this gem of a post! Fixed my problem.
Thank you so much.
John8472 said:
WOW, read so many posts about this problem, was about to go back to non kit kat roms, until I found this gem of a post! Fixed my problem.
Thank you so much.
Click to expand...
Click to collapse
If you read carefully about every s5 based rom,you will see a wifi problem mentioned and a flashable zip provided. All you need is read
Sent from my GT-I9300 using XDA Free mobile app
andjeomilosrdja said:
If you read carefully about every s5 based rom,you will see a wifi problem mentioned and a flashable zip provided. All you need is read
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Read it all and non of the so called wifi fixes worked. I flashed like 3 wifi-fix files nothing helped. This is the only post that worked. So if YOU read carefully my post, you will see that i read so many posts , all you need is read :laugh:
John8472 said:
Read it all and non of the so called wifi fixes worked. I flashed like 3 wifi-fix files nothing helped. This is the only post that worked. So if YOU read carefully my post, you will see that i read so many posts , all you need is read :laugh:
Click to expand...
Click to collapse
:thumbup::beer:
Sent from my GT-I9300 using XDA Free mobile app
Same problem for OmniROM...
I have this same 'Saved, Secured' problem on OmniROM... my .cid.info file already contains the word murata ... what do I do?
Paresh Kalinani said:
I have this same 'Saved, Secured' problem on OmniROM... my .cid.info file already contains the word murata ... what do I do?
Click to expand...
Click to collapse
same for me on QS-i9300-KK-v2.5 ROM...
- I flash wifix.zip file - NO wifi
- download wifix manager, install, set to EU - NO wifi
- delete .cid.info file, create again that file, nothing happend, still no connection on any wifi
I don't know what else can I do
seba-base said:
same for me on QS-i9300-KK-v2.5 ROM...
- I flash wifix.zip file - NO wifi
- download wifix manager, install, set to EU - NO wifi
- delete .cid.info file, create again that file, nothing happend, still no connection on any wifi
I don't know what else can I do
Click to expand...
Click to collapse
Try this one
https://www.dropbox.com/s/hhgg0a435itfbkr/Wi-Fi_fix_4.4.2.zip
Sent from my GT-I9300 using XDA Free mobile app
Thanks for quick response, but still nothing saved, secured, full signal but can not to connect. I tried to configure router, tried friends router, city public wifi, but without success
seba-base said:
Thanks for quick response, but still nothing saved, secured, full signal but can not to connect. I tried to configure router, tried friends router, city public wifi, but without success
Click to expand...
Click to collapse
Did you flash wifi fix right after flashing rom? Some people said that the wifi worked without applying the fix.
Sent from my GT-I9300 using XDA Free mobile app
On this rom I came from miui v5 kk rom too where wifi works great. First I installed this QS-i9300-KK rom without wifi-fix, on the first start wifi didn't work, so I flashed wifi-fix.zip and wifi still didn' work. Then I downloaded wifix without any sussess, then I clean installed rom again and after instalation flashed wifi-fix.zip still no success and so on and on... I don't know what else should I do
seba-base said:
On this rom I came from miui v5 kk rom too where wifi works great. First I installed this QS-i9300-KK rom without wifi-fix, on the first start wifi didn't work, so I flashed wifi-fix.zip and wifi still didn' work. Then I downloaded wifix without any sussess, then I clean installed rom again and after instalation flashed wifi-fix.zip still no success and so on and on... I don't know what else should I do
Click to expand...
Click to collapse
Which version? 2.4 or 2.5?
Sent from my GT-I9300 using XDA Free mobile app
This rom is v2.5, do you think I should try install older version first and then latest? I think my phone and s5 roms are not meant to be together
seba-base said:
This rom is v2.5, do you think I should try install older version first and then latest? I think my phone and s5 roms are not meant to be together
Click to expand...
Click to collapse
Wifi fix worked fine for me on 2.4. I did't install 2.5. Maybe try reflash without wipe and choose Agni kernel? Or maybe you are right,it's not meant to be
Sent from my GT-I9300 using XDA Free mobile app
andjeomilosrdja said:
Wifi fix worked fine for me on 2.4. I did't install 2.5. Maybe try reflash without wipe and choose Agni kernel? Or maybe you are right,it's not meant to be
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
HAHA OK SOLVED!!!
Clean installed v2.4 without wifi-fix and strange wifi works then installed v2.5 without full wipe and look it works fine such a small step and it changes everything :laugh:
thanks @andjeomilosrdja pozdrav u Novi Sad
s5 wifi save secure problem
hey
i am using s5 and have wifi save secure problem. whenever i try to connect to wifi it shows save secure. I am new to android. ;ooking for if someody can help