I bought this new wireless keyboard HP K4000 few days back. I am totally satisfied by the quality and design of the product. It is connected via bluetooth without any dongle and also have android function keys. It is a good alternative for Sony BKC52 plus it is cheaper than it. If you guyz wanna use any external keyboard for your tab go for itttt.....
Here is a video which i made to show the keyboard
been using logi k810 and works great. I noticed google keyboard height setting only applies in portrait mode which takes half the screen in landscape.
10Tab said:
been using logi k810 and works great. I noticed google keyboard height setting only applies in portrait mode which takes half the screen in landscape.
Click to expand...
Click to collapse
you can try Disable Fullscreen Keyboard Xposed module.
Related
Some of us use the Prime without the dock and like to use it upside down landscape while charging it since the charging port connector is on the bottom of the Prime and is a little unwieldy to use when not upside down and charging.
Though most apps will detect the orientation of the Prime and rotate appropriately, some don't (like the YouTube app when playing video). The following is a great app that can force the screen orientation on troublesome apps and works when the built-in orientation detection doesn't.
Tested and works in both Honeycomb and ICS.
Market Link:
Orientation Control
orientation
Thanks for this. I'll give it a try. I had wondered if anyone else was having these issues.
It works for almost every possible orientation, but I'm trying to set the "reversed landscape" mode but It doesn't work, I'm using virtous prime .21, do you have the same problem or is just me?
I was having the same problem and after I tried some apps, I decided for "Rotation locker", it does the job (I needed the reverse landscape) perfectly and It's free
I've used this before, and it works well. Just remember that some apps will force close due to this. So if you experience force closes, try disabling it.
Sent from my Transformer Prime TF201 using xda premium
I've been searcing Play Store for an app that use motion detection by the front camera to wake up the screen on my Galaxy Tab 10.1 when someone enters the room, or is walking near the device. The Camera Trigger (Motion detect) app is one that looked promising, but unfortunately there is no trigger for activating the screen. I also looked at Tasker but there is as far as I can see currently no event available to use motion detected by camera to activate the screen.
The reason I would like this is because the Tab is used by my family to display the Google agenda/calendar for all family members and their activities. Instead of having to turn on the device it would be a cool hi-tech feature to automatically turn on the screen when someone walks in the room. I understand that using the camera for such a purpose would make the battery drain quicker, but that's ok as the Tab is alway in it's docking station with a power adapter. Also I'm not using the lock screen/there is no security as this is a Tablet used by the family.
Anyone?
Thx n brgds ToonWolf
I want the exact thing
Hi there,
I just wanted to say that i actually want the exact thing:
An app that turns on the screen, when motion is detected by the front facing camera
and turns it off again, if there hadn't been motion for a couple of seconds...
Have you found a solution / an app that can do that?
or anyone else here ?
I'm surprised / sad that it looks like there isn't an app for that...
Me too.
I am using a Gbox to display my security cams on a tv mounted up in the corner of the kitchen. Right now I have we turn on the TV with a remote when walking into the room, but it would be extremely sexy if it the screen woke when it detected motion and went to sleep after 10 mins or so.
Hi.
Yes, i have, I9300, i bought multimedia stand for note II and it works like charm. One small problem. Screen resolution of my monitor is 1200x1600, and what resolution S3 has - you know. Is there any way or program that will change screen resolution after connection S3 with monitor to the 1200x1600? It looks not good when S3 give me his native resolution, all blurry and crappy view on the monitor.
Stand has 3x USB, 1xHDMI, 1x3.5jack, and place to connect charger that has 5V 2A. For curious ones i have bought that device here that is Polish shop but pictures you can see there.
Anybody know is there any way to make that phone use 1200x1600 screen resolution after connection to that base?
Oh, one more question, that base make phone to use landscape mode, but when i use skype, or camera, it works in normal mode, and screen is blinking till my camera is running. When i turn my camera off - phone is using FULL SCREEN MODE!! The same situation is in youtube app and when i am watching movies. It uses screen resolution that my monitor has.
Anybody can help me with that?
Nope, there's nothing you can do with hdmi resolution -plenty of similar posts but none I've read found a solution. Can't make any sense of your second question.
Oh, sorry, it`s hard to me to translate that straight from polish ok i try again: Camera. For example: When my cellphone is connected to that base, and i`m using skype, when i turn on my front or back camera, person who i talking to view me on side, like 90 degrees to left. Cellphone is forced to use landscape mode on that base and only camera is working normally (neutron music player too ;P )
Another fact that normal screen is not on full screen, on top and bottom there is black stripe - i understand why. And skype, youtube or other movies is using fullscreen mode.
Other soft for s3 supporting that connection to base?
Does anyone else have a problem with 3rd party keyboards being oversized at higher resolutions?
At the lowest resolution setting, the keyboard is normal-sized, in the middle it's still usable when the keyboard is adjusted to the smallest setting, but at max resolution the keyboard takes up about half of the screen, even at the smallest setting.
This is true for SwiftKey, SwiftKey beta, and g board, so far as I have tested.
Any ideas on how to fix this issue?
Hmm, now that you say it, I see the issue too. I never looked for the option for a smaller keyboard. Nice option..
Same here. I use Swiftkey, currently running at only FHD+ (grrrr) until this is fixed. Samsung keyboards are unaffected.
Using Swiftey, and on the smallest setting it uses only slightly more screen that the Samsung keyboard. And that's with the number row turned on. If I turn off the number row, it's slightly smaller than the Samsung keyboard with the row of symbols at the top.
I'm using GBoard. It's sized fine on mine in WQHD.
hello, my xz1 compact inst root and I have some questions:
I - Anyone know an app that reduce or turn off keyboard backlight, and that reduce absolut low light numbers? I do not like how this phone is bightness at night and not satisfied with the most famous apps on play store or night mode.
II - When stamina mode is turned on my keyboard starts to act strange like buggy and delays between touch and real write. Does anyone know how to solve this?
III - I'm using OnePlus app for gestures and not satisfied with my keyboard app. I'm using Gboard didn't like chromma and Swiftkey, does anyone recommend an app for bigger board since I had no navigation bar on screen? thank you!
1) CF.Lumen has a great red-light night mode, that makes the phone comfortably usable in utter darkness. The lowest brightness level on this phone is definitely a weakness.
2) It's likely Stamina Mode reduces performance to lengthen battery life. You might try a simpler, more lightweight keyboard, maybe? I think there's one called 'Simple Keyboard' that is really lightweight.
3) You can resize both Gboard and Swiftkey to be pretty large, easily taking up more than half of the screen.