Related
Does anyone know if the note fitted with the speck case fits properly on the samsung dock that they sell in att stores?
Thanks
Don't think so. I have a case about the size of the Spec and it does not allow the usb plug to seat properly. The SGP Ultra Thin I also have does work with the dock, but has minimal protection on the bottom and top of the phone.
via my AT&T Note
Sorry, it doesn't work. The Speck is too thick and the charging port cutout is too small to make a connection.
My Samsung Galaxy Note™ is smarter than your Honor Student.
Seido makes this dock that is made to work with their active series of cases, which is definitely just as bulky, if not bulkier than the Speck Candyshell, so it should work just fine. It's a bit spendy, and only works with portrait mode, but it's still a viable option:
http://www.seidioonline.com/innodock-p/crjhnx1-bkc.htm
You're welcome.
It looks like my Belkin for S6 won't fit an S8 (would buy an S8 very soon) so what is the best armband size for S8? Should I pick an iphone 7 plus armband model?
I saw a Floveme model for 5.5'' smartphones that has 3 holes on each side so it will surely match the 3.5mm jack of the S8 but would it be too wide for the S8?
vegetaleb said:
It looks like my Belkin for S6 won't fit an S8 (would buy an S8 very soon) so what is the best armband size for S8? Should I pick an iphone 7 plus armband model?
I saw a Floveme model for 5.5'' smartphones that has 3 holes on each side so it will surely match the 3.5mm jack of the S8 but would it be too wide for the S8?
Click to expand...
Click to collapse
I would suggest you to go with Supcase or Lifeproof Armband for Galaxy S8.
Thanks but I got an iphone 7+ armband a month ago, a bit big but as long as you tighten it, it's perfect.
I also used a cutter to enlarge the lower opening of about 1cm to let my earphones plug pass without problem
Just wanting to see what all cases everyone is getting for their S20 Ultra. I am debating on getting the UAG Monarch Series case again. Their really good cases and not bulky at all.
I've preordered the Samsung Protective Standing Cover along with the phone.
I've also ordered a Zizo Bolt.
I used to like UAG Monarch, UAG Plasma and Otterbox Symmetry cases, but they offer very little drop protection at the bottom lip, which is loose.
Also thinking of getting the Speck Presidio Grip and Gear4 Battersea.
I work in a factory environment so defender/whitestone all the way...
I'm trying to find one that will a) have built-in magnets for magnetic mounting (want them built-in so there's no bulge from inserting a flat one between the case and the phone so it lies flat on it's back), and b) have those magnets in a place where it minimizes disruption to wireless charging. The only one I was able to find for my S9 was by Pitaka (with their own magnetic mount, which makes sense since the magnets are in a non-standard location), but the case had an issue where the top/bottom/side lips wouldn't extend past the front face to protect the screen from lying flat on it's front on a desk.
texasmax said:
I'm trying to find one that will a) have built-in magnets for magnetic mounting (want them built-in so there's no bulge from inserting a flat one between the case and the phone so it lies flat on it's back), and b) have those magnets in a place where it minimizes disruption to wireless charging. The only one I was able to find for my S9 was by Pitaka (with their own magnetic mount, which makes sense since the magnets are in a non-standard location), but the case had an issue where the top/bottom/side lips wouldn't extend past the front face to protect the screen from lying flat on it's front on a desk.
Click to expand...
Click to collapse
Mous is an option:
https://www.mous.co/
I'm sticking with the Unicorn Beetle Pro by supcase,been rockin that case for years throughout my different Notes and S series phones.Just as good as Otterbox defender but way cheaper.Win,Win in my opinion.
sabesh said:
Mous is an option:
https://www.mous.co/
Click to expand...
Click to collapse
Nice- thanks!
Pitaka, since many years, for day to day / office, dBrand Grip case (with custom pitaka plates under the back sticker) as a self made 'Pitaka pro' for days with higher demand for protection.
Using Pitaka in the car daily, so I want that option ti stick it to my magnetic Qi charger in the car.
Latercase for me. Probably the DBrand case and skin also
I'll go with the Spigen Neo Hybrid. Slim enough not to be embarrassing, but offers drop protection. Gone are the days of OB Defender, UAG, etc. Second option would be the SupCase Unicorn Beetle.
I also buy the QuadLock case for the Summer, to use with my bike.
Black leather offical from their site. Although most of the time I don't use a case even though I should. But given the hefty price tag it probably will be wise to keep it on
Negan said:
Black leather offical from their site. Although most of the time I don't use a case even though I should. But given the hefty price tag it probably will be wise to keep it on
Click to expand...
Click to collapse
The (Samsung) black leather case was nice from the S10+ series. Got an open box from Best Buy for $29 in perfect condition although the package looked like Flossy opened it! LOL. The silicone IMO was junk!
The rugged (Samsung) case is great, the kickstand comes in handy. I have one on my S10 5G and Note 10+ and will be picking one up for the S20U.
I may splurge and get the Pitaka for the S20U as the pics I've seen with the phone in it just look plain sick!
I'm gonna start with the Caseology Parallax and Spigen Neo Hybrid for now. Got them both on the way!
Spigen Rugged Armor, already in hand lol
Been using S-view cover on N10+ since September, it does great screen protection job, don't want anything else for my S20 Ultra. Scratch protection 24/7 and a piece of mind when the phone is being put into or taken out of jacket or pant's pockets. My N+10 screen still has a 'mint' looks even after 6 months of use w/o any protective film, I peeled that off right after getting it.
mzsquared said:
Been using S-view cover on N10+ since September, it does great screen protection job, don't want anything else for my S20 Ultra. Scratch protection 24/7 and a piece of mind when the phone is being put into or taken out of jacket or pant's pockets. My N+10 screen still has a 'mint' looks even after 6 months of use w/o any protective film, I peeled that off right after getting it.
Click to expand...
Click to collapse
I don't see an s-view cover for the Ultra on Samsung's website. S20 and S20+ have it.
sabesh said:
I don't see an s-view cover for the Ultra on Samsung's website. S20 and S20+ have it.
Click to expand...
Click to collapse
Well, when I was writing my previous post I just assumed that they will have S-view case for S20s, most Samsung phones have it and now I found it, they don't list the price yet:
https://www.samsung.com/us/mobile/galaxy-s20-5g/accessories/
mzsquared said:
Found it, they don't list the price yet:
https://www.samsung.com/us/mobile/galaxy-s20-5g/accessories/
Click to expand...
Click to collapse
Cool!
Gone for the grey samsung case with the stand option , abit dull but it protects the phone , second choice would be a case from spigen
Spigen Rugged Armour. Went with it for the S9+, S10+ and now S20U. Protected my phone perfectly for 3 years so why change
I currently have the Samsung book case for the tab s7+. I am having issues with the s pen coming loose and falling off. The book case with the tab s6 had a flap on the top back of the case that would cover the s pen so it couldn't fall off. The book case for the s7+ does not have this. Does anybody know of a case for the tab s7+ that does hold the s pen in place?
ElAguila said:
I currently have the Samsung book case for the tab s7+. I am having issues with the s pen coming loose and falling off. The book case with the tab s6 had a flap on the top back of the case that would cover the s pen so it couldn't fall off. The book case for the s7+ does not have this. Does anybody know of a case for the tab s7+ that does hold the s pen in place?
Click to expand...
Click to collapse
I like the supcase unicorn beetle. Not a book case though
I picked up a TiMOVO case from Amazon. It has elastic that holds the s pen in place. It feels a little more bulky than the book cover case but not to bad.
Spigen recently released (in the last month or so) a new book case. I think it's superior to Samsung's own book case. Offers a trifold front cover that can be folded back and also a spot to mount the s pen in the designated area on the back of the tablet. Link below if you're interested. I picked it up and it's been great.
Amazon.com: Spigen Rugged Armor Pro Designed for Galaxy Tab S7 Plus Case with S Pen Holder (2020) - Black
Buy Spigen Rugged Armor Pro Designed for Galaxy Tab S7 Plus Case with S Pen Holder (2020) - Black: Cases - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Thanks for the info on the Spigen caee. I just ordered it.
ElAguila said:
I currently have the Samsung book case for the tab s7+. I am having issues with the s pen coming loose and falling off. The book case with the tab s6 had a flap on the top back of the case that would cover the s pen so it couldn't fall off. The book case for the s7+ does not have this. Does anybody know of a case for the tab s7+ that does hold the s pen in place?
Click to expand...
Click to collapse
This case covers the pen plus has an additional placeholder for it & comes with a keyboard
Amazon.com: IVSO for Samsung Galaxy Tab S7 Plus 12.4" Keyboard Case 2020 Model SM-T970/T975/T976 with S Pen Holder, PU Leather Stand Cover with Magnetically Detachable Wireless Keyboard for Galaxy Tab S7+: Computers & Accessories
Buy IVSO for Samsung Galaxy Tab S7 Plus 12.4" Keyboard Case 2020 Model SM-T970/T975/T976 with S Pen Holder, PU Leather Stand Cover with Magnetically Detachable Wireless Keyboard for Galaxy Tab S7+: Keyboard Cases - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Why don't you put the s-pen in the spot on the spine of the book cover? Mine has never fallen out when the case is closed. Everyone complains that their book cover doesn't hold the s-pen in place during transport when they leave it on the back even though the slot on the spine is completely protected. The only problem is that it doesn't charge there.
I got mine from Best buy Canada, Tucano brand, no magnet crap to mess up my S Pen, the only one that has no Smart cover thing.
Perfect protection of the pen.
Actually, so good that I had trouble getting the pen out so I cut off a few mm to make it easier
Scorpion34 said:
This case covers the pen plus has an additional placeholder for it & comes with a keyboard
Amazon.com: IVSO for Samsung Galaxy Tab S7 Plus 12.4" Keyboard Case 2020 Model SM-T970/T975/T976 with S Pen Holder, PU Leather Stand Cover with Magnetically Detachable Wireless Keyboard for Galaxy Tab S7+: Computers & Accessories
Buy IVSO for Samsung Galaxy Tab S7 Plus 12.4" Keyboard Case 2020 Model SM-T970/T975/T976 with S Pen Holder, PU Leather Stand Cover with Magnetically Detachable Wireless Keyboard for Galaxy Tab S7+: Keyboard Cases - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Click to expand...
Click to collapse
This looks great but Amazon says unavailable with no info re restock .... ugh
Infiland case - great quality, reasonable price:
https://www.amazon.com/INFILAND-Multiple-Compatible-Samsung-12-4-inch/dp/B08F1T6D6C
Take a look at the Fintie line of cases on Amazon. I've got one for the S7 and S5e, both look and feel great. I don't have actual experience with the one for the S7+ though.
Tablet Book Cover Click-Inist bulky, but contains a strap for the pen
https://www.brack.ch/targus-tablet-book-cover-click-in-galaxy-tab-s7-plus-1140918
absolute2010 said:
Spigen recently released (in the last month or so) a new book case. I think it's superior to Samsung's own book case. Offers a trifold front cover that can be folded back and also a spot to mount the s pen in the designated area on the back of the tablet. Link below if you're interested. I picked it up and it's been great.
Amazon.com: Spigen Rugged Armor Pro Designed for Galaxy Tab S7 Plus Case with S Pen Holder (2020) - Black
Buy Spigen Rugged Armor Pro Designed for Galaxy Tab S7 Plus Case with S Pen Holder (2020) - Black: Cases - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Click to expand...
Click to collapse
Old thread, but I wanted to say I bought this one, too, and it is outstanding. Not much bulk, great protection, and the pen stays put.
I have both the original Keyboard Case and Book Cover Case. Been rocking the Keyboard case about 95% of the time. Its aweome, and I use my tablet for a lot of productivity, so its nice to have quick acess to keyboard. The pen is stored on the back, like it was on tab S6 Book cover.
On the book cover its stored inside the case. Also convenient.
ElAguila said:
I currently have the Samsung book case for the tab s7+. I am having issues with the s pen coming loose and falling off. The book case with the tab s6 had a flap on the top back of the case that would cover the s pen so it couldn't fall off. The book case for the s7+ does not have this. Does anybody know of a case for the tab s7+ that does hold the s pen in place?
Click to expand...
Click to collapse
You have to get a keyboard case for that. Like this.
https://a.co/d/cVCpInF
ElAguila said:
I currently have the Samsung book case for the tab s7+. I am having issues with the s pen coming loose and falling off. The book case with the tab s6 had a flap on the top back of the case that would cover the s pen so it couldn't fall off. The book case for the s7+ does not have this. Does anybody know of a case for the tab s7+ that does hold the s pen in place?
Click to expand...
Click to collapse
I had the Tab S6 also with that same case. I loved it, and gave up ever finding one for the Tab S7+ I now have that same Spigen case. its really the only one that works for me.
C0BRA01 said:
I had the Tab S6 also with that same case. I loved it, and gave up ever finding one for the Tab S7+ I now have that same Spigen case. its really the only one that works for me.
Click to expand...
Click to collapse
This is the Poetic TurtleSkin. It's fat and rubbery but not sticky. I got it for less that $20. I had to get used to it but now I can say I'd buy it again. I also have the genuine book cover wich is well made but overpriced. And dealing with the pen seems like it was an afterthought.
The Spigen one runs for several inches along the back, and holds the s Pen firmly. Mine has never come loose.
I'm going to be using dbrands case w/skin there's no question there for me, so with that I decided to find a magnet that I can put on the back of the phone that will use magsafe accessories.
I found this, link and while I'm not fan of anker I know it's a good brand. I read the questions and reviews and it does work on samsung s22 so I assume it will work on the s23u as well. Now for my question, I need to find where the coil is in the s23u so I can stick the magnet in the best location. So far I found these pics (see attached) of a case designed for s23u that has the magsafe in the case and it claims it's location is perfect but can anyone tell me if that's true or a better guide or teardown where the coil is?
Spens don't like magnets. I would avoid that.
blackhawk said:
Spens don't like magnets. I would avoid that.
Click to expand...
Click to collapse
Then why did samsung launch this official magnetic gadget case for the s23u ultra that is clearlya magsafe ripoff?
spart0n said:
Then why did samsung launch this official magnetic gadget case for the s23u ultra that is clearlya magsafe ripoff?
Click to expand...
Click to collapse
Google it. One way to find out for sure...
I think the camera bump would interfere with anything you would attach to the magsafe ring?
PITAKA Case for Samsung Galaxy S23 Ultra, 6.8 Inch, Compatible with MagSafe, Slim & Light Samsung Galaxy S23 Ultra Case, 600D Aramid Fiber Made [Fusion Weaving MagEZ Case 3 - Rhapsody] https://a.co/d/0x3fPhm
blackrubi said:
I think the camera bump would interfere with anything you would attach to the magsafe ring?
Click to expand...
Click to collapse
There are MANY cases with it built-in so it should work on the back of the phone itself.
zoetrope said:
PITAKA Case for Samsung Galaxy S23 Ultra, 6.8 Inch, Compatible with MagSafe, Slim & Light Samsung Galaxy S23 Ultra Case, 600D Aramid Fiber Made [Fusion Weaving MagEZ Case 3 - Rhapsody] https://a.co/d/0x3fPhm
Click to expand...
Click to collapse
I've already got a case I'm going to use and that isn't changing otherwise I would have just bought a magsafe case.
Also I think I found the coil, I think. In the teardown skin for the s23u on dbrands site (which I believe is accurate). I think the side of the coil is where that one cable is curved where I drew the red arrow
spart0n said:
Then why did samsung launch this official magnetic gadget case for the s23u ultra that is clearlya magsafe ripoff?
Click to expand...
Click to collapse
Samsung gadget case is not Magnetic , it attaches accessories by some locking mechanism, & yes magnets interfere with Spen untill you gen a magnetic sheilded case like UAG or pitaka
hoss_n2 said:
Samsung gadget case is not Magnetic , it attaches accessories by some locking mechanism, & yes magnets interfere with Spen untill you gen a magnetic sheilded case like UAG or pitaka
Click to expand...
Click to collapse
How does the interference manifest? I have a basic Spigen clear rubber case with magsafe and have yet to experience any S-pen problem.
fortuneman said:
How does the interference manifest? I have a basic Spigen clear rubber case with magsafe and have yet to experience any S-pen problem.
Click to expand...
Click to collapse
It's not the magsafe case that causes issues, it's when you attach certain Magsafe accessories that the issue arises.
I have 3 magsafe accessories using a Mous case and none of them seem to affect my s-pen. One of them is an Anker 633 powerbank and it still doesn't affect it even while charging from it.
video
I found this video and i think I can find a magnet and accessories that don't affect the spen pretty easily especially with Amazon's easy returns.
The matter of my original question still stands. How can I find the optimal place to put my magnet? Is there any teardown that shows the location of the coil in the s23u?
video
spart0n said:
I found this video and i think I can find a magnet and accessories that don't affect the spen pretty easily especially with Amazon's easy returns.
The matter of my original question still stands. How can I find the optimal place to put my magnet? Is there any teardown that shows the location of the coil in the s23u?
Click to expand...
Click to collapse
You can see where the charging coil is in Jerry's video:
It's basically dead center
Get whatever case you ideally want, attach ESR halolock ring to the back of the case and done. Very easy to align and attach.
The ring has the strongest connection amongst all rings and cases.
If you don't want to attach a halolock you could buy a case you like with a ring built into it from ESR, Spigen and a bunch of others.
The spen interference is real but it's not because of the ring or the case. It's when you attach a magsafe power bank above a certain magnetic strength and try to use the pen at the same time. Only in this setup will it skip line where the magnetism is strongest. Detach the power bank and pen works without issue.