Disclaimer!
I, xRaZeR_FuZioNx, or anyone else who is affiliated with this project are not responsible for any kind of damage to your device in any way.
Please use it at your own risk! Whatever you do with your phone is your own choice!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey guys! Here's TWRP 3 for the Samsung Galaxy Core Prime (G360T/G360T1).
Screenshots:
Installation:
Put your phone into download mode, and connect it to a computer.
Flash TWRP via ODIN.
Boot into TWRP using the key combo (Volume Up, Home, and Power).
Downloads:TWRP 3.0.0-0
Bugs:
MTP may not work correctly.
SlimPickins will not flash. Recommended to flash using TWRP 2, make a backup of the System, then upgrade to TWRP 3.
Special Thanks To:
Y300-0100 - Major contributor, helped fix issues.
Let me just steal this...
You made your own? Checking this out now!!!
Sent from my SM-G360T1 using Tapatalk
bogarty said:
You made your own? Checking this out now!!!
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
Yes, but not without the help of @Y300-0100.
xRaZeR_FuZioNx said:
Disclaimer!
I, xRaZeR_FuZioNx, or anyone else who is affiliated with this project are not responsible for any kind of damage to your device in any way.
Please use it at your own risk! Whatever you do with your phone is your own choice!
Hey guys! Here's TWRP 3 for the Samsung Galaxy Core Prime (G360T/G360T1).
Screenshots:
Installation:
Put your phone into download mode, and connect it to a computer.
Flash TWRP via ODIN.
Boot into TWRP using the key combo (Volume Up, Home, and Power).
Downloads:TWRP 3.0.0-0
Bugs:
MTP may not work correctly.
Special Thanks To:
Y300-0100 - Major contributor, helped fix issues.
Click to expand...
Click to collapse
YASSS!! TWRP 3 is out! Now at least recovery can look nicer and much improved now.
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
thisisapoorusernamechoice said:
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
Click to expand...
Click to collapse
Thank you for letting me know. I can confirm this issue appears at the "formatting system" step. I'll look into this issue and see what may be causing it.
thisisapoorusernamechoice said:
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
Click to expand...
Click to collapse
Twrp 3.0 has options mount system as read only on start up. Was that option ticked?
Y300-0100 said:
Twrp 3.0 has options mount system as read only on start up. Was that option ticked?
Click to expand...
Click to collapse
I don't believe so, if you're referring to the prompt that comes up the first time you boot into TWRP, I told it to go ahead and modify /system/ or whatever. Also I was able to restore a nandroid backup (including the system partition) in TWRP 3.0.0-0 before I came across this issue. Since my memory is imperfect at best, I'll retest it again tonight once I have the free time and access to my phone (it's actually my gf's but she's sold on the whole custom ROM scene since I showed her how much CM improved my S5; now she won't stop asking if I've gotten CM to build successfully yet for this phone lol)
thisisapoorusernamechoice said:
I don't believe so, if you're conflict bing to the prompt that comes up the first time you boot into TWRP, I told it to go ahead and modify /system/ or whatever. Also I was able to restore a nandroid backup (including the system partition) in TWRP 3.0.0-0 before I came across this issue. Since my memory is imperfect at best, I'll retest it again tonight once I have the free time and access to my phone (it's actually my gf's but she's sold on the whole custom ROM scene since I showed her how much CM improved my S5; now she won't stop asking if I've gotten CM to build successfully yet for this phone lol)
Click to expand...
Click to collapse
So as I thought. Wipe system definitely working but there must be some conflict between updare binary and updater script with twrp since you restored system. First recovery wipe system and than restore it.
this conflict is common when rom is made with kitchen.
So wait for cm. It won't be to long
Y300-0100 said:
So wait for cm. It won't be to long
Click to expand...
Click to collapse
God I can't wait. I synced the repos but I can't seem to get it to build, no matter what I tinker with
thisisapoorusernamechoice said:
FYI, I was able to successfully make a nandroid backup and restore said backup on TWRP 3.0.0-0. However, with 3.0.0-0 I was unable to clean install Slim Pickins Rom. When that happened I rebooted into download mode, reinstalled TWRP 2.8.7.0, which I was then able to clean install Slim Pickins with
Click to expand...
Click to collapse
Unfortunately, that was the case for me, too. I was able to wipe but not able to install the Slim Pickins ROM. It came up with an error. So I had to go back to TWRP 2.8.7.0 and successfully install the ROM.
Thanks
I've hung out in the irc almost every day and got to see this be made and released thanks all to who contributed to it now to make cm
I flashed this via an app, and I got a recovery loop. I don't have access to a computer so I can't use odin. Any way to fix this recovery loop?
X_shinobi.apk_X said:
I flashed this via an app, and I got a recovery loop. I don't have access to a computer so I can't use odin. Any way to fix this recovery loop?
Click to expand...
Click to collapse
What app did you use? The only app I know of that flashes Odin files is "Mobile Odin" by Chainfire, but I think it's still not compatible with our device, so the only way to flash TWRP is via Odin and the only way for you to fix boot is to flash either Trapkernel or the stock firmware in Odin. The only other way I can think of is if you maybe had TWRP 2 installed before this and you're still able to boot into it and restore a previous backup.
Sent from my SM-G360T1 using Tapatalk
bogarty said:
What app did you use? The only app I know of that flashes Odin files is "Mobile Odin" by Chainfire, but I think it's still not compatible with our device, so the only way to flash TWRP is via Odin and the only way for you to fix boot is to flash either Trapkernel or the stock firmware in Odin. The only other way I can think of is if you maybe had TWRP 2 installed before this and you're still able to boot into it and restore a previous backup.
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
I just extracted the file, then just used rom installers flash image feature. And I fix it by using twrps terminal command feature and just dd my stock recovery I keep as a backup.
X_shinobi.apk_X said:
I just extracted the file, then just used rom installers flash image feature. And I fix it by using twrps terminal command feature and just dd my stock recovery I keep as a backup.
Click to expand...
Click to collapse
OK. I think I know what the problem was. Yes you can flash the recovery.img in a flash tool app. I just verified that it does work for this recovery too by using an app called "Rashr" and successfully flashing from TWRP 2 to TWRP 3 using the extracted recovery.img for TWRP 3. When it's done though it asks if you want to reboot to recovery, which you must've done. You can not select reboot to recovery from anywhere on this device without causing a recovery loop. I'd say you could try flashing the boot.img from the Trapkernel.zip in your flash tool app too to fix boot, but since you can't use apps right now and have no way to access a backup, then you will need to find a computer to fix your device.
Sent from my SM-G360T1 using Tapatalk
bogarty said:
OK. I think I know what the problem was. Yes you can flash the recovery.img in a flash tool app. I just verified that it does work for this recovery too by using an app called "Rashr" and successfully flashing from TWRP 2 to TWRP 3 using the extracted recovery.img for TWRP 3. When it's done though it asks if you want to reboot to recovery, which you must've done. You can not select reboot to recovery from anywhere on this device without causing a recovery loop. I'd say you could try flashing the boot.img from the Trapkernel.zip in your flash tool app too to fix boot, but since you can't use apps right now and have no way to access a backup, then you will need to find a computer to fix your device.
Sent from my SM-G360T1 using Tapatalk
Click to expand...
Click to collapse
Yeah I figured it out, I planned for such a problem and made backup of the stock recovery so I could use the terminal from advanced options to flash it. Let me know when they solve this issue.
Sent from my SM-G360T1 using XDA-Developers mobile app
X_shinobi.apk_X said:
Yeah I figured it out, I planned for such a problem and made backup of the stock recovery so I could use the terminal from advanced options to flash it. Let me know when they solve this issue.
Sent from my SM-G360T1 using XDA-Developers mobile app
Click to expand...
Click to collapse
Try using flash fire by chainfire if you still need to install twrp and can't use a PC. It's the successor to mobile Odin and is compatible with way more devices including virtually every Samsung device. Flashify might work too. Obviously either app will require root
X_shinobi.apk_X said:
Yeah I figured it out, I planned for such a problem and made backup of the stock recovery so I could use the terminal from advanced options to flash it. Let me know when they solve this issue.
Sent from my SM-G360T1 using XDA-Developers mobile app
Click to expand...
Click to collapse
I think the "reboot to recovery" causing a recovery loop issue might be a system one. It's always been an issue on this device. There are quite a few versions of TWRP now for the SM-G360T1, but all if them do it. I think it even did it with the stock recovery too. Not a big deal though in my mind. Just have to remember to always reboot normal.
Related
EDIT:
I find solution : http://forum.xda-developers.com/showpost.php?p=37897681&postcount=22
Hi,
The Recovery – ClockworkMod 5.5.0.4 is very poor... Can't Save/Restaure the ROM.
h**p://droidbasement.com/db-blog/?p=2668 (sorry, I'm a new user, I can't post links - ** = tt)
Where can I find a complete CWM ?
Thank you
Le Dam said:
Hi,
The Recovery – ClockworkMod 5.5.0.4 is very poor... Can't Save/Restaure the ROM.
h**p://droidbasement.com/db-blog/?p=2668 (sorry, I'm a new user, I can't post links - ** = tt)
Where can I find a complete CWM ?
Thank you
Click to expand...
Click to collapse
I've found in this link another Recovery and very h**p://forum.xda-developers.com/showthread.php?t=1080028 but where can I download it ?
Is it better or not of mine (5.5.0.4) ?
Thank you... I need your help
CWM 6.0.1.5
What's the issue with the 5.5.0.4? I'm still using it and don't have any problems with it?
Hi XaMaB,
Thank you for your interest
First, sorry for my bad english, I usually speak french.
I not realy have a problem with 5.5.0.4 but I do not understand why there are missing features.
Picture of my recovery tablet P7100 10.1v
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My smartphone (ZTE Blade) has recovery 5.5.0.4 and I can use more fonctions (Backup/Restore, USB, ...).
Do you have more fonctions in the recovery of your Tab P7100 10.1v ?
Thank you
to be continued...
Following :
Well ! It seems that I am not under ClockworkMod but Android recovery !!! -> "Android system recovery <3e>"
I don't understand... I've flashed many times with Odin and it's each time the same.
Maybe I've use a bad file ?
@ XaMaB :
Sorry for this questions:
- Are you sure your link is good for Tab 10.1v P7100 ?
- Can you post a new link with de correct CWM 5.5.0.4 for this tablet ?
Thank you for your help.
I really appreciate
Le Dam said:
Hi XaMaB,
Thank you for your interest
First, sorry for my bad english, I usually speak french.
I not realy have a problem with 5.5.0.4 but I do not understand why there are missing features.
Picture of my recovery tablet P7100 10.1v
My smartphone (ZTE Blade) has recovery 5.5.0.4 and I can use more fonctions (Backup/Restore, USB, ...).
Do you have more fonctions in the recovery of your Tab P7100 10.1v ?
Thank you
to be continued...
Click to expand...
Click to collapse
I had this issue in the past. Try to flash it with fastboot rather than Odin. Search for the guide in the forum.
Install PdaNet Desktop so you will get the correct drivers (worked for me).
Al3cks said:
I had this issue in the past. Try to flash it with fastboot rather than Odin. Search for the guide in the forum.
Install PdaNet Desktop so you will get the correct drivers (worked for me).
Click to expand...
Click to collapse
Thank you Al3cks, but...
...Ghaaaaa ! I'm going crazy
When I make a "temp root" : fastboot boot myrecovery.img : YES !! it work
But when I make a "permanent root" (flash the rom ?) : fastboot flash recovery myrecovery.img, the command windows (Dos mode) say : OKAY sending and OKAY writing but when I reboot in Recovery mode, I'm always in Android System Recovery
Please, help ... I'm near the final solution
Le Dam said:
Thank you Al3cks, but...
...Ghaaaaa ! I'm going crazy
When I make a "temp root" : fastboot boot myrecovery.img : YES !! it work
But when I make a "permanent root" (flash the rom ?) : fastboot flash recovery myrecovery.img, the command windows (Dos mode) say : OKAY sending and OKAY writing but when I reboot in Recovery mode, I'm always in Android System Recovery
Please, help ... I'm near the final solution
Click to expand...
Click to collapse
You probably have a stock ROM. I don't know how, but I think the stock bootloader somehow restores the original recovery. I never tried CWM on the stock rom. After I flashed and booted the custom recovery I always flashed CyanogenMod right after it. If I didn't do this, I would notice I had the default <3e> recovery after an adb reboot recovery command, but didn't give this too much thought.
I once thought I bricked my tablet, I had stock ROM, tried to flash something not meant for P7100 but after 15 minutes of staying with a black empty screen on, the tablet "magically" rebooted back to a fully working rom.
Search for pershoot and ask him more details. That's just what I observed.
What I think is that it is not a good idea to mess with the stock bootloader. If you want custom recovery, flash CyanogenMod and CWM will remain permanent. Otherwise, just let it be, or, when you need advanced recovery functions, use fastboot to boot CWM 6.0.x.x from your computer, do what you have to do, and reboot normally. You will remain rooted even if you have stock recovery.
Thank you Al3cks.
Yes, you're right, I do not want brick my tablet.
But I do not understand why CWM does not install in place of that of Android. Not with with Fastboot, and not with Odin (Fastboot and Odin show a good flash!).
Why?
I really want CWM Recovery on this Tablet because it's possible.
If nobody has arrived to put the CMW, I stopped immediately but many people have this Recovery on the P7100 10.1v tablet.
Now, where still the problem... bad root ?
Is it possible to flash from internal memory (recovery.zip) ???
Please, I do not want to give up, I want this mode! :crying:
Thank you all for your help and your patience...
Le Dam said:
Thank you Al3cks.
Yes, you're right, I do not want brick my tablet.
But I do not understand why CWM does not install in place of that of Android. Not with with Fastboot, and not with Odin (Fastboot and Odin show a good flash!).
Why?
I really want CWM Recovery on this Tablet because it's possible.
If nobody has arrived to put the CMW, I stopped immediately but many people have this Recovery on the P7100 10.1v tablet.
Now, where still the problem... bad root ?
Is it possible to flash from internal memory (recovery.zip) ???
Please, I do not want to give up, I want this mode! :crying:
Thank you all for your help and your patience...
Click to expand...
Click to collapse
Hi,
when you have root, try to install ROM Manager from Play Store..
Try to install Recovery from ROM-Manager..You will have to select Galaxy tab 10.1.
Try if you can go into recovery.
Than flash Recovery.img for 10.1v .. 5.5.0.4 or latest one via fastboot
jensema said:
Hi,
when you have root, try to install ROM Manager from Play Store..
Try to install Recovery from ROM-Manager..You will have to select Galaxy tab 10.1.
Try if you can go into recovery.
Than flash Recovery.img for 10.1v .. 5.5.0.4 or latest one via fastboot
Click to expand...
Click to collapse
Hi jensema,
On another forum, a guy says Rom Manager does not recognize the tablet 10.1v.
Rom Manager knows that like the 10.1 and it may brick the tablet.
But I can't say if this guy say right...
What do you think about this ?
Stay away from ROM Manager on this tablet. And as I said, I don't think you can have CWM recovery, as long as you are on stock rom. The stock rom somehow restores the original recovery on every boot.
Sent from my GT-I9000 using Tapatalk 2
Le Dam said:
Hi jensema,
On another forum, a guy says Rom Manager does not recognize the tablet 10.1v.
Rom Manager knows that like the 10.1 and it may brick the tablet.
But I can't say if this guy say right...
What do you think about this ?
Click to expand...
Click to collapse
I can only tell you what i did today:
had kind of same problem, after flashing recovery, a reboot to recovery took me to custom recovery.
Had those problem today and already in the past.. Or when a recovery flash was succesfully, i can boot to recovery, but reboot option out of recovery took me to recovery again.
Today I flashed Stock 3.0.1 to try the latest cm10.
Again i had problems flashin recovery..
From rootet stock 3.0.1 i Installed ROM manager.
I installed recovery for 10.1 through Rom manager..
and after this i booted to recovery succesfully ..(For me it worked- try at your own risk..)
I went back to fastboot and flashed CWM 6.0.1.5. for 10.1v from pershoot site..without problems..
CWM 6.0.1.5 working.. Problems never occured again..
Al3cks said:
Stay away from ROM Manager on this tablet. And as I said, I don't think you can have CWM recovery, as long as you are on stock rom. The stock rom somehow restores the original recovery on every boot.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Well... I just make a big risked experience.
I installed Rom Manager (before response Al3cks) and I flashed CWM Recovery.
After reboot, the tablet stay on a black screen for a few minutes (I was scared) and it restarted on CWM Recovery! Yes ... but for a short time.
And after a normal reboot on ICS, I tried again to restart the CWM Recovery and it was gone!
I back on the recovery of Android.
Al3cks say right, after each start, the original ROM check and removes recovery not original.
Fortunately, this ROM does not relock the bootloader and not uninstalled root!
Conclusion : We can only have another recovery if the tablet is flashed with a custom ROM ?
(and sorry again for my bad english)
Le Dam said:
Well... I just make a big risked experience.
I installed Rom Manager (before response Al3cks) and I flashed CWM Recovery.
After reboot, the tablet stay on a black screen for a few minutes (I was scared) and it restarted on CWM Recovery! Yes ... but for a short time.
And after a normal reboot on ICS, I tried again to restart the CWM Recovery and it was gone!
I back on the recovery of Android.
Al3cks say right, after each start, the original ROM check and removes recovery not original.
Fortunately, this ROM does not relock the bootloader and not uninstalled root!
Conclusion : We can only have another recovery if the tablet is flashed with a custom ROM ?
(and sorry again for my bad english)
Click to expand...
Click to collapse
Then just boot the recovery.
fastboot boot revovery.img
So you can backup/restore and install custom rom as well.
Le Dam said:
Well... I just make a big risked experience.
I installed Rom Manager (before response Al3cks) and I flashed CWM Recovery.
After reboot, the tablet stay on a black screen for a few minutes (I was scared) and it restarted on CWM Recovery! Yes ... but for a short time.
And after a normal reboot on ICS, I tried again to restart the CWM Recovery and it was gone!
I back on the recovery of Android.
Al3cks say right, after each start, the original ROM check and removes recovery not original.
Fortunately, this ROM does not relock the bootloader and not uninstalled root!
Conclusion : We can only have another recovery if the tablet is flashed with a custom ROM ?
(and sorry again for my bad english)
Click to expand...
Click to collapse
From what I observed, and from what you experienced, yes. If you want CWM recovery, flash a custom ROM.
Thanks for interest
Ok, but now my tablet is under ICS official (pure, no Touchwiz, ...)
This ROM is developed from Vodafone and is an official upgrade.
Can you tell me why change ROM to unofficial ICS or JB (without front cam, ..), or another ?
Thank you
Le Dam said:
Thanks for interest
Ok, but now my tablet is under ICS official (pure, no Touchwiz, ...)
This ROM is developed from Vodafone and is an official upgrade.
Can you tell me why change ROM to unofficial ICS or JB (without front cam, ..), or another ?
Thank you
Click to expand...
Click to collapse
Why you need CWM then?
Sent from my GT-P7100 using xda app-developers app
Dryfit.linux said:
Why you need CWM then?
Sent from my GT-P7100 using xda app-developers app
Click to expand...
Click to collapse
Because I often use the Backup-Restore function in CWM
I like testing many APK and when my phone is down, I restore last image.
If I can make Backup/Restore from my tablet, I can test JB rom and if I don't like this, I restore the actually rom in 2 minutes...
Le Dam said:
Because I often use the Backup-Restore function in CWM
I like testing many APK and when my phone is down, I restore last image.
If I can make Backup/Restore from my tablet, I can test JB rom and if I don't like this, I restore the actually rom in 2 minutes...
Click to expand...
Click to collapse
I had a problem with CM10 so I went back to stock ICS and I managed to get CWM 6.0.1.2 to remain permanent. I used fastboot to flash it first (fastboot flash recovery recovery.img), then immediately after this, without rebooting the tablet, while still in fastboot, i ran "fastboot boot recovery.img" and in CWM when I hit reboot system now, it gave me a warning telling me that bootloader may restore default recovery and gave an option to fix this and I selected the option. To my surprise, at the next reboot to recovery I found CWM. I only needed it to root my tablet, I didn't want it permanent, but I don't mind. Go to pershoot's blog (droidbasement) and acces the folder for the CM9 rom. From there, download the recovery archive and extract recovery.img from it.
Sent from my GT-P7100 using Tapatalk HD
---------- Post added at 12:15 PM ---------- Previous post was at 12:11 PM ----------
Link: http://droidbasement.com/galaxy/roms/cm9/p3/
Sent from my GT-P7100 using Tapatalk HD
I have a problem about my Android Phone, last last month was my first time to have an android phone and im very excited to install apps and somehow to customize it.
One day while searching and reading on google I saw something interesting which is Rooting Android, I tried it and successfully rooted my phone and there's no problem but I know that if my phone is rooted I can customize my ROM, Upgrade my phone version and etc.. Im very interested with that, so I used to search more about how to install custom ROM and I have read some forum threads that has a steps on how to install custom rom and what tools to used, i dont know if that's what im looking for but I just followed the intructions and steps and then applied it on my phone.
When im about to install Custom ROM I used MTKdroidtools for my O+ 8.2 Android 2.3.5 Gingerbread for creating backups, after that procedure there's a notification that I will reboot my android phone via CWM Recovery Mode then I reboot it, then it turned off and turned on I know that im in Recovery Mode because I have encountered it before.
Then here comes my crazy idea and I don't know why but I just continued to do it, I clicked the Wipe Data or Wipe All Cache Data I forgot it then after that the next thing I did was to installed the Custom ROM("ICS_DARK_BREED_V_A818_by_BassureroX") which I have downloaded on my SD Card then reboot my phone again and then its not working anymore I mean it's stack in bootloop which my friend says that's what happened to my phone, I regret on what I have done I really need to recover my phone back to normal again please help me.
Is there any thing I can do? I hope there's still a solution for my phone problem.
Thank You.
Here's the images of my phone after installing that Custom ROM:
*When Opening:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*When Pressing Buttons (Power + Volume Up):
*When Charging:
yobib_814 said:
I have a problem about my Android Phone, last last month was my first time to have an android phone and im very excited to install apps and somehow to customize it. One day while searching and reading on google I saw something interesting which is Rooting Android, I tried it and successfully rooted my phone and there's no problem but I know that if my phone is rooted I can customize my ROM, Upgrade my phone version and etc.. Im very interested with that, so I used to search more about how to install custom ROM and I have read some forum threads that has a steps on how to install custom rom and what tools to used, i dont know if that's what im looking for but I just followed the intructions and steps and then applied it on my phone. When im about to install Custom ROM I used MTKdroidtools for my O+ 8.2 Android 2.3.5 Gingerbread for creating backups, after that procedure there's a notification that I will reboot my android phone via CWM Recovery Mode then I reboot it, then it turned off and turned on I know that im in Recovery Mode because I have encountered it before. Then here comes my crazy idea and I don't know why but I just continued to do it, I clicked the Wipe Data or Wipe All Cache Data I forgot it then after that the next thing I did was to installed the Custom ROM("ICS_DARK_BREED_V_A818_by_BassureroX") which I have downloaded on my SD Card then reboot my phone again and then its not working anymore I mean it's stack in bootloop which my friend says that's what happened to my phone, I regret on what I have done I really need to recover my phone back to normal again please help me. Is there any thing I can do? I hope there's still a solution for my phone problem.
Thank You.
Here's the images of my phone after installing that Custom ROM:
*When Opening:
*When Pressing Buttons (Power + Volume Up):
*When Charging:
Click to expand...
Click to collapse
Use paragraph, your post is very difficult to read.
Now, regarding your problem, try to wipe /system, /data and /cache from recovery, flash the rom and wipe /data and /cache again.
Sent from my GT-I9100 using XDA Free mobile app
totalnoob34 said:
Use paragraph, your post is very difficult to read.
Now, regarding your problem, try to wipe /system, /data and /cache from recovery, flash the rom and wipe /data and /cache again.
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
i paragraphed it sir.
as you said to wipe / system, /data and /cache from recovery, flash the rom and wipe /data and /cache again, i cant enter to that function in my phone.
All i can do is to use SP Flash Tool but i dont know what version is compatible with my phone, thank you.
Bump .
yobib_814 said:
i paragraphed it sir.
as you said to wipe / system, /data and /cache from recovery, flash the rom and wipe /data and /cache again, i cant enter to that function in my phone.
All i can do is to use SP Flash Tool but i dont know what version is compatible with my phone, thank you.
Click to expand...
Click to collapse
I'm so sorry, xda mobile app didn't show it correctly I suppose.
totalnoob34 said:
I'm so sorry, xda mobile app didn't show it correctly I suppose.
Click to expand...
Click to collapse
what do you mean sir? that you cant search my phone here in xda?
anyway my phone is O+ Android 8.2 and it's china phone or an imitation i think, is there any tool that can help me to get into recovery mode even if my phone is turned off and uses only usb cable connected to the pc?
yobib_814 said:
what do you mean sir? that you cant search my phone here in xda?
anyway my phone is O+ Android 8.2 and it's china phone or an imitation i think, is there any tool that can help me to get into recovery mode even if my phone is turned off and uses only usb cable connected to the pc?
Click to expand...
Click to collapse
I meant the app didn't show the paragraphs in your post. Anyway, the only way to boot a turned off phone in recovery is by a key combo, generally POWER + VOL+ or POWER + VOL-, depending on the model
totalnoob34 said:
I meant the app didn't show the paragraphs in your post. Anyway, the only way to boot a turned off phone in recovery is by a key combo, generally POWER + VOL+ or POWER + VOL-, depending on the model
Click to expand...
Click to collapse
I can now enter to the recovery mode sir.
*Here is a short explanation for what really happened:
I have an android phone(Rooted & ROM Manager installed).
I used MTK Droidtools for backups, rebooted and autoCWM was created.
I Wiped Data/Factory Reset then Install the Custom ROM from SD Card, when finished i rebooted my phone then its not working anymore.
But i can charge it and i can also enter to autoCWM when pressing Power Button+Camera Button+Volume Up Button.
is there anything i can do?
yobib_814 said:
I can now enter to the recovery mode sir.
*Here is a short explanation for what really happened:
I have an android phone(Rooted & ROM Manager installed).
I used MTK Droidtools for backups, rebooted and autoCWM was created.
I Wiped Data/Factory Reset then Install the Custom ROM from SD Card, when finished i rebooted my phone then its not working anymore.
But i can charge it and i can also enter to autoCWM when pressing Power Button+Camera Button+Volume Up Button.
is there anything i can do?
Click to expand...
Click to collapse
Yes, if you can boot into recovery mode then you can try flashing another rom for your phone, maybe checking the integrity of the file before flashing it
totalnoob34 said:
Yes, if you can boot into recovery mode then you can try flashing another rom for your phone, maybe checking the integrity of the file before flashing it
Click to expand...
Click to collapse
yes i want to flash another ROM on my android sir because i dont have backup of my ROM, my phone is O+ 8.2 Android, 2.3.5 Gingerbread, MT6573.
Can you help me sir for what ROM must be for my phone? and thank you very much for the replies.
yobib_814 said:
yes i want to flash another ROM on my android sir because i dont have backup of my ROM, my phone is O+ 8.2 Android, 2.3.5 Gingerbread, MT6573.
Can you help me sir for what ROM must be for my phone? and thank you very much for the replies.
Click to expand...
Click to collapse
Repeat the model please, I didn't understand it. And, where did you get the rom you flashed and screw your phone up?
totalnoob34 said:
Repeat the model please, I didn't understand it. And, where did you get the rom you flashed and screw your phone up?
Click to expand...
Click to collapse
sorry for that, the model is O+ 8.2 Android
and it's a MT6573 device, i got the ROM here: http://www.symbianize.com/showthread.php?t=916396
its been a month after i screwed my phone
yobib_814 said:
sorry for that, the model is O+ 8.2 Android
and it's a MT6573 device, i got the ROM here: http://www.symbianize.com/showthread.php?t=916396
its been a month after i screwed my phone
Click to expand...
Click to collapse
I had a look on the net, and I could not find any stock nor custom rom for your model. I think you flashed a rom for another model, and of course now the phone is obviously not booting.
If you can find a way to return to stock rom you're good to go, maybe looking on the website of the manifacturer, otherwise there is nothing much to do..
Keep in mind for the next time to double check what you're flashing, and to always backup first.
totalnoob34 said:
I had a look on the net, and I could not find any stock nor custom rom for your model. I think you flashed a rom for another model, and of course now the phone is obviously not booting.
If you can find a way to return to stock rom you're good to go, maybe looking on the website of the manifacturer, otherwise there is nothing much to do..
Keep in mind for the next time to double check what you're flashing, and to always backup first.
Click to expand...
Click to collapse
im really regretting for what ive done
and yes its not booting, and i made a backup but its gone because my aunts pc got reformatted. Maybe i should ask on some forums if they do have a stock rom or custom rom of the same model of my phone and wait
and if you see stock or custom rom for my device kindly PM me sir, and thank you very much for the time godbless you my friend.
yobib_814 said:
im really regretting for what ive done
and yes its not booting, and i made a backup but its gone because my aunts pc got reformatted. Maybe i should ask on some forums if they do have a stock rom or custom rom of the same model of my phone and wait
and if you see stock or custom rom for my device kindly PM me sir, and thank you very much for the time godbless you my friend.
Click to expand...
Click to collapse
No problem. I'm sorry to hear that. You can try to recover the backup file from the formatted pc
totalnoob34 said:
No problem. I'm sorry to hear that. You can try to recover the backup file from the formatted pc
Click to expand...
Click to collapse
ill try to check the backup file of the formatted pc, is it in local disk D?
You need change phone?
totalnoob34 said:
No problem. I'm sorry to hear that. You can try to recover the backup file from the formatted pc
Click to expand...
Click to collapse
good day sir!
i have found my backup files created via cwm last july 2014, here are the images:
*what will i do sir?
*and how can i restore it using rua1 autoCWM v5.5.0.4 installed on my phone.
*thank you very much for your time
yobib_814 said:
good day sir!
i have found my backup files created via cwm last july 2014, here are the images:
*what will i do sir?
*and how can i restore it using rua1 autoCWM v5.5.0.4 installed on my phone.
*thank you very much for your time
Click to expand...
Click to collapse
Put that in /clockworkmod on your sdcard, reboot to recovery, try to restore that and cross your fingers
totalnoob34 said:
Put that in /clockworkmod on your sdcard, reboot to recovery, try to restore that and cross your fingers
Click to expand...
Click to collapse
i tried putting only the "Android_130531_backup_140707.." on /clockworkmod/backup and it restores some files but still not booting and i think i did it wrong.
as you said put it(ALL) do you mean all of them sir? hmm
ok i'll do it and feedback on you later thank you very much! hope my phone will get back to normal again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[RECOVERY][vk810][6.0.5.1] ClockworkMod 6.0.5.1 Unofficial
Code:
*** Disclamer
This is only for the vk810 Verizon LTE model (product name altev)
Introduction
I recently took over porting CM11.0 for paperWastage. For the sake of completeness and to give users more options, I built ClockworkMod 6.0.5.1 since we already had TWRP thanks to the efforts of drGravy and others. This is a flashable zip, so you need to have the loki patched TWRP already installed. I will work on a way to directly loki flash CWM onto these tablets, but for now, feel free to flash this recovery.
Click to expand...
Click to collapse
Installation instructions
Need latest custom recovery (TWRP, ...?). You can use towelroot or this offline root or Kingo online-root (nor preferred) to root from stock ROM
Do nandroid backup in recovery
Wipe dalvik/cache/system
This recovery is only for vk810 verizon LTE-version only.
Flash this CWM recovery .zip as you normally would
This should go without saying, but rebooting to recovery via power menu or
Code:
adb reboot recovery
does not work because of LG's laf.img (what enables download mode). You have to power off the device and then power on holding power+volume down. Then select Factory Reset, which will then boot you into recovery.
Click to expand...
Click to collapse
Download
Current Recovery:
[20150121][RECOVERY][vk810][6.0.5.1] ClockworkMod 6.0.5.1 Unofficialhttps://www.dropbox.com/s/fm5heowhvc4dxa8/vk810-CWM_6.0.5.1-recovery.zip?dl=0
Click to expand...
Click to collapse
Bugs?
- (1/23/15) There is a bug with the recovery.fstab (I think) where it defaults mounting /dev/mmcblk0 to /sdcard. mmcblk0 is a block device and not a file system, and the correct path for /sdcard should be /data/media/0 for internal SD and 1 for external SD. I need to dig into it further to figure out how to fix it. My first attempt at fixing this morning resulted in a non bootable recovery.img
Click to expand...
Click to collapse
Thanks To/Credits
Code:
cyanogenmod dev team for source/kernel build-up
omni team for omni source
drgravy for TWRP
anyone else who contributed to the development of v500/v510/vk810
So flashed, all went well, made a back up, then lost root on reboot. Stumproot app says I'm rooted, Su says in can't install binary?
Sent from my HTC6600LVW using XDA Premium HD app
Hello CM 11! Thanks developer...for this and the rom....May want to add a note if the stock rooted rom is kept should answer the last two questions as NO,, NO...or they'll be in a mess and loose root.
Sent from my HTC6600LVW using XDA Premium HD app
mitchbaria said:
Hello CM 11! Thanks developer...for this and the rom....May want to add a note if the stock rooted rom is kept should answer the last two questions as NO,, NO...or they'll be in a mess and loose root.
Click to expand...
Click to collapse
I'm assuming you solved your issue then? Forgive my ignorance, could you explain what "last two questions" are that should be answered no and no?
@N00b-un-2, thanks again. Installed fine, used it to wipe cache and flash your CM11 and made a backup of CM11 after configuring it. Haven't tested a restore yet.
I also wanted to note in response to the warning in your OP that rebooting to recovery from the power menu doesn't work. It works for me (from the power options enabled from Developement). I can make and upload a video if necessary.
Yes,,,upon reboot of the stock 4.4.2 lg rom clockwork mod ask you if you'd like to prevent stock recovery or something to that affect and then says " you may have lost root do you want CM to fix now? Yes or no....if you answer these two questions with anything but " no and no" you will lose root. It may be trivia to people in the know, but first i lost root had to restore recovery through adb then restore the backup ( thank God i made one upon switching to Clockwork from twrp)....
mitchbaria said:
Yes,,,upon reboot of the stock 4.4.2 lg rom clockwork mod ask you if you'd like to prevent stock recovery or something to that affect and then says " you may have lost root do you want CM to fix now? Yes or no....if you answer these two questions with anything but " no and no" you will lose root. It may be trivia to people in the know, but first i lost root had to restore recovery through adb then restore the backup ( thank God i made one upon switching to Clockwork from twrp)....
Click to expand...
Click to collapse
Oh, I see. I didn't occasion to see those questions because I flashed his CM11 after flashing this recovery. Thanks, good to know (if I remember if I ever use this with stock).
I should have clarified that I meant on the stock firmware. Reboot to recovery works fine on CM11, but has been hit or miss for me on the official firmware.
roirraW "edor" ehT said:
I'm assuming you solved your issue then? Forgive my ignorance, could you explain what "last two questions" are that should be answered no and no?
@N00b-un-2, thanks again. Installed fine, used it to wipe cache and flash your CM11 and made a backup of CM11 after configuring it. Haven't tested a restore yet.
I also wanted to note in response to the warning in your OP that rebooting to recovery from the power menu doesn't work. It works for me (from the power options enabled from Developement). I can make and upload a video if necessary.
Click to expand...
Click to collapse
That means that your tablet is not properly rooted. What root method did you use? I ran into this when I rooted using Kingo Root, but not stump or towel. You may be able to fix this by
Code:
su
mount -o remount,rw /system
chmod 4755 /system/xbin/su
reboot
basically, if SuperSU is giving you the "su binary needs to be updated" error and it fails, then you're not properly rooted.
mitchbaria said:
Yes,,,upon reboot of the stock 4.4.2 lg rom clockwork mod ask you if you'd like to prevent stock recovery or something to that affect and then says " you may have lost root do you want CM to fix now? Yes or no....if you answer these two questions with anything but " no and no" you will lose root. It may be trivia to people in the know, but first i lost root had to restore recovery through adb then restore the backup ( thank God i made one upon switching to Clockwork from twrp)....
Click to expand...
Click to collapse
Dropbox link is broken. Anyone have a copy of it?
mikentucson said:
Dropbox link is broken. Anyone have a copy of it?
Click to expand...
Click to collapse
Hi! Here's a mirror in my sections on Android File Host.
Just to be clear, this recovery was compiled by @N00b-un-2. I am just temporarily or permanently hosting a mirror of it on AFH. @N00b-un-2, let me know if you want me to take my copy down, and likewise if you want to put my link in your OP that's fine too.
what is going on with the recoveries on this device? The link to TWRP is broken. I accidentally deleted the CWM recovery I built a few months back and the VM I was temporarily "borrowing" to build on was retired.
I am in the process of building CWM recovery again, should be ready later today, barring any unforseen circumstances. I'm going to take a stab at compiling a new version of TWRP, but I'm having quite a few problems at the moment.
In the mean time here is a link to DrGravy's TWRP 2.7.0.2 and 2.7.0.1
https://www.dropbox.com/s/hanc02rjutt5k10/VK810_twrp_2.7.0.1.zip?dl=0
https://www.dropbox.com/s/tx0amj50k7fi6ff/vk810-TWRP_2.7.0.2-recovery.zip?dl=0
And also, in case anyone is interested, here is a link to they Cyanogen Recovery. I was a bit surprised when I went to build CWM again based on the CM-12.1 sources that the recovery it built was no longer CWM, but rather Cyanogen Recovery. Nonetheless, it will allow you to flash ROMs
https://www.dropbox.com/s/edp0up3bfon421i/vk810-cyanogen-recovery.zip?dl=0
Like I said, I should have CWM up again later today I just have to pull down the CM-11.0 sources and build again.
Dummy
mitchbaria said:
So flashed, all went well, made a back up, then lost root on reboot. Stumproot app says I'm rooted, Su says in can't install binary?
Sent from my HTC6600LVW using XDA Premium HD app
Click to expand...
Click to collapse
So I feel like a dummy but how the heck do you flash this thing? If I boot into stock recovery it won't let me mount the SD card...something about invalid argument...
Cothirteen said:
So I feel like a dummy but how the heck do you flash this thing? If I boot into stock recovery it won't let me mount the SD card...something about invalid argument...
Click to expand...
Click to collapse
First you have to root your VK810, which is easiest under build 24A or below using the Stump apk.
Then look for the TWRP v2.7.0.1 thread for the VK810 in Original Development. You have to start with that version then flash whatever newer custom recovery you want from there.
You can't flash custom things from stock recov recovery.
If you're meaning that your custom recovery won't mount the external Micro SD card, you could download this custom recovery to internal storage. Or you could format your external Micro SD card from TWRP after backing up the contents of it to your PC.
Sometimes device's custom recoveries have problems with cards formatted on a PC. Mine doesn't but I've seen others have trouble.
Sent from my VK810 4G using Tapatalk
Help please. I downloaded VS985_23Cto24B_OTA-5.0.1-Lollipop-7-10-2015.7z as posted by roirraW "edor" ehT. I can't figure out how to load it. I tried converting it to a zip and that didn't work. Is there a way to do this through Loki or what? Thanks in advance.
b52apl said:
Help please. I downloaded VS985_23Cto24B_OTA-5.0.1-Lollipop-7-10-2015.7z as posted by roirraW "edor" ehT. I can't figure out how to load it. I tried converting it to a zip and that didn't work. Is there a way to do this through Loki or what? Thanks in advance.
Click to expand...
Click to collapse
I haven't really fooled around much with trying to manually apply OTAs. I was successful with the VS985 12B->23A/B/C beta and final OTAs but not once since then. The way that worked for 12B->23C didn't work for me for 23C->24B. I more provided the files for other people to try too, in hopes that if they did find success, they'd report it and describe what they did. No one's done so.
As you found out, you can't flash OTAs from a custom recovery - you have to be fully stock never rooted (since the most recent time you flashed a KDZ or TOT) in order to take OTAs.
Also, you're posting in the wrong place. This is the LG G Pad 8.3 section, and this is the ClockworkMod Recovery thread, nothing related to OTAs for the VS985. I have a thread for the VS985 OTAs in the General section of the Verizon G3 forums, but as I said, no one's reported having success with 23C->24B or higher.
Why not just flash the 24B KDZ or whatever release you're wanting to be on? It's a lot easier than trying to manually apply an OTA. If you're only incrementing one step in releases (23C->24B) for the VS985, you could probably get away with using the "Normal" option which doesn't wipe your data, although I'd use the built-in LG Backup first just in case and save the backup to the external MicroSD card.
If you're wanting to be rooted and on 24B or another higher version, just wipe from custom recovery and flash a 24B or whatever ROM. There's versions of JasmineROM and SkyDragon that are made with 24B - I think JasmineROM v8 and SkyDragon v5.
If you're not rooted or don't have custom recovery, flash the 10B KDZ with the CSE option (which wipes all data including internal storage), root with the Stump app, use TWRP Manager from the Play Store to install TWRP, then flash JasmineROM v8 and the 24B Bootstack from @xdabbeb 's VS985 v2.0 thread.
roirraW "edor" ehT said:
I haven't really fooled around much with trying to manually apply OTAs. I was successful with the VS985 12B->23A/B/C beta and final OTAs but not once since then. The way that worked for 12B->23C didn't work for me for 23C->24B. I more provided the files for other people to try too, in hopes that if they did find success, they'd report it and describe what they did. No one's done so.
As you found out, you can't flash OTAs from a custom recovery - you have to be fully stock never rooted (since the most recent time you flashed a KDZ or TOT) in order to take OTAs.
Also, you're posting in the wrong place. This is the LG G Pad 8.3 section, and this is the ClockworkMod Recovery thread, nothing related to OTAs for the VS985. I have a thread for the VS985 OTAs in the General section of the Verizon G3 forums, but as I said, no one's reported having success with 23C->24B or higher.
Why not just flash the 24B KDZ or whatever release you're wanting to be on? It's a lot easier than trying to manually apply an OTA. If you're only incrementing one step in releases (23C->24B) for the VS985, you could probably get away with using the "Normal" option which doesn't wipe your data, although I'd use the built-in LG Backup first just in case and save the backup to the external MicroSD card.
If you're wanting to be rooted and on 24B or another higher version, just wipe from custom recovery and flash a 24B or whatever ROM. There's versions of JasmineROM and SkyDragon that are made with 24B - I think JasmineROM v8 and SkyDragon v5.
If you're not rooted or don't have custom recovery, flash the 10B KDZ with the CSE option (which wipes all data including internal storage), root with the Stump app, use TWRP Manager from the Play Store to install TWRP, then flash JasmineROM v8 and the 24B Bootstack from @xdabbeb 's VS985 v2.0 thread.
Click to expand...
Click to collapse
Then maybe I have the wrong file. I'm trying to get the clockworkmod recovery on a VK810 with 4.2.2 rooted and TWRP 2.7.0.1 recovery. The original source for cwm 6.0.5.1 is a dropbox that isn't there any more. I thought the file I mentioned was the equivalent. Maybe my problem is that I don't know where to find cwm 6.0.5.1 for the VK810.
b52apl said:
Then maybe I have the wrong file. I'm trying to get the clockworkmod recovery on a VK810 with 4.2.2 rooted and TWRP 2.7.0.1 recovery. The original source for cwm 6.0.5.1 is a dropbox that isn't there any more. I thought the file I mentioned was the equivalent. Maybe my problem is that I don't know where to find cwm 6.0.5.1 for the VK810.
Click to expand...
Click to collapse
Thanks for accidentally discovering that I had the right file named wrong, and the wrong file named the right thing in the same place! Sorry about the confusion.
Edit 3: I am NOT having a good day. I managed to delete the wrong file both on my local PC I just downloaded them to, and on AFH. *grumble* I'm looking for another copy, I might have it on my PC at home or on my flash drive.
@b52apl
Do *you* still have the file you had originally downloaded? The .7z one that said VS985 and OTA? If you rename it to .zip it should work - the contents looked fine when I checked after I did that, but then I accidentally deleted it, and I had already purposely deleted it on AFH since I thought it was the wrong file. If you still have the original zip could you upload it somewhere so I can put it back on AFH? I've also PM'd the OP to see if he still has the file.
I can't believe I did all that.
You can still use TWRP v2.8.7.0 (flash the new version from your existing 2.7.0.1) in the meantime if you wish. It's in one of these sections - my stickied guide in the General section should have a link to the thread if you can't find it.
roirraW "edor" ehT said:
Thanks for accidentally discovering that I had the right file named wrong, and the wrong file named the right thing in the same place! Sorry about the confusion.
Edit 3: I am NOT having a good day. I managed to delete the wrong file both on my local PC I just downloaded them to, and on AFH. *grumble* I'm looking for another copy, I might have it on my PC at home or on my flash drive.
@b52apl
Do *you* still have the file you had originally downloaded? The .7z one that said VS985 and OTA? If you rename it to .zip it should work - the contents looked fine when I checked after I did that, but then I accidentally deleted it, and I had already purposely deleted it on AFH since I thought it was the wrong file. If you still have the original zip could you upload it somewhere so I can put it back on AFH? I've also PM'd the OP to see if he still has the file.
I can't believe I did all that.
You can still use TWRP v2.8.7.0 (flash the new version from your existing 2.7.0.1) in the meantime if you wish. It's in one of these sections - my stickied guide in the General section should have a link to the thread if you can't find it.
Click to expand...
Click to collapse
I still have the file. I don't have a personal place to upload it to. If you send me a message with an address, I'll upload it to wherever you want it. The file is 9.52Mb. Just to be clear, I converted it to a .zip file, but TWRP refused to install it. Should I have tried to restore it as a backup file?
b52apl said:
I still have the file. I don't have a personal place to upload it to. If you send me a message with an address, I'll upload it to wherever you want it. The file is 9.52Mb. Just to be clear, I converted it to a .zip file, but TWRP refused to install it. Should I have tried to restore it as a backup file?
Click to expand...
Click to collapse
I'll PM you a link to a folder on my Google Drive that I gave public permissions to upload.
When you say you converted it to a zip, what exactly did you do? Did you just rename the file or something else? I'll still take a look at it, see if I can figure it out, and as long as I can extract the recovery.img from the zip, then I can make a fresh zip if necessary.
No, you wouldn't be able to restore it because it's not a TWRP backup.
If you upgrade to TWRP 2.8.7.0 then you can choose it's option to flash am Image instead of Zip and can try flashing the recovery.img if you can extract that from the zip, but probably best to be safe and let me test first.
@b52apl
Good news! I was able to rename the file to vk810-CWM_6.0.5.1-recovery-by-N00b-un-2.zip and it worked perfectly. I was able to flash it, reboot recovery and was in CWM recovery. Mind you, I wasn't on TWRP v2.7.0.1 any more - I was already upgraded to TWRP v2.8.7.0, so I don't know if there's any compatibility issue with the much earlier version of TWRP. Once I rebooted in CWM Recovery, I was able to flash the TWRP v2.8.7.0 zip back and reboot recovery again, although I had to turn CWM's Advanced menu/Lokify option off first. I was also able to extract the recovery.img from the zip and as I suggested, it's got to be fine to flash that directly from TWRP v2.8.7.0 which has the option to switch from displaying Zips to displaying Img's, and then to flash it.
I also had a text file with the original MD5 hash of the "vk810-CWM_6.0.5.1-recovery-by-N00b-un-2.zip" I had uploaded previously, and it was the same MD5 so I know it wasn't corrupted:
Code:
22B138C250B3A1F3B9FDB1E2B5A84549
Thanks again for the re-upload!
Most of the people on xda getting error while flashing new update on YU yureka.
so i have created this thread to solve there's problems :highfive:
you just have to follow some steps.
1.you should be on stock recovery.
if you do not have stock recovery then here is LINK
************************************************************
2. now you need big data pack you have to download whole updated stock rom which is approx 643.767 MB
here is LINK.
3. now put this in internal storege(not in any folder or ext_sd card)
4. go to recovery and apply update. and choose this zip file and flash it :good:
and now very important step. Hit thanks button :laugh:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do i need to be on stock Cm12 ROM to do this?? I am currently running Pac Rom.
Thanks!
sunny765 said:
Do i need to be on stock Cm12 ROM to do this?? I am currently running Pac Rom.
Thanks!
Click to expand...
Click to collapse
yes bro if you want update then you should be on stock if you have backup ur stock rom then just restore it.
koi yaar ye recovery ko flashable zip mai kar k dona plss. direct cwm se stock recovery flash ho esa
Rakesh251 said:
koi yaar ye recovery ko flashable zip mai kar k dona plss. direct cwm se stock recovery flash ho esa
Click to expand...
Click to collapse
have tried flishify app?
LINK
flash using this.
i have not tried yes but search.
Why is it 643 mb the update is just 130mb
thearjunraju said:
Why is it 643 mb the update is just 130mb
Click to expand...
Click to collapse
'cos it's the "whole updated stock rom", i.e., stock rom + the latest update rolled into one convenient easy-to-use package. read the op.
i was reading stock kernel was needed
i know kernel is usually in the full build
so
1. do we need the stock kernel?
2. Will TA backup work?
3. do we need to clear cache and data?
4. Will the existing 3rd party kernel and recoveries work after the update?
As far as I know from my limited flashing experience, the custom kernel will get overwritten by those present in the ROM being flashed.
Sent from my A0001 using XDA Free mobile app
oemaritradey said:
i know kernel is usually in the full build
so
1. do we need the stock kernel?
2. Will TA backup work?
3. do we need to clear cache and data?
4. Will the existing 3rd party kernel and recoveries work after the update?
Click to expand...
Click to collapse
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
feeroz123 said:
As far as I know from my limited flashing experience, the custom kernel will get overwritten by those present in the ROM being flashed.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
ashish_zarekar said:
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
Click to expand...
Click to collapse
Please flash any custom kernel to see if it works or not :3
oemaritradey said:
Please flash any custom kernel to see if it works or not :3
Click to expand...
Click to collapse
I am on thunderzap kernel
enjoy happy flashing .
best of luck
ashish_zarekar said:
1. you should be on stock kernel.
2.after upgrading your mobile you should take backup again. becoz why you want to revert back to older version ?
3.no need to clear cache and data.
4. yes you can flash any kernel and recovery . i had updated it and i am on TWRP.
*************************************************************************************************************************
yes you are right but still there is thread on yu forum for it and they said that you should be on stock kernel by the way you can flash it on your current kernel if you see any error then you can flash stock kernel and flash this update
Click to expand...
Click to collapse
LOL i tried falshing stock kernel with flashify both time i didnt get wifi signal(MAC UNKNOWN) xD Am not switching over to new update anytime soon....
Flashed this full ROM. Successful !! :highfive:
But I lost Root access and the stock recovery.
I am trying to flash it in fastboot mode, but its stuck at this message:
target reported max download size of 268435456 bytes
sending 'recovery' (8394 KB)...
Without stock recovery, I can't flash the Root.zip file to get root access.
feeroz123 said:
Flashed this full ROM. Successful !! :highfive:
But I lost Root access and the stock recovery.
I am trying to flash it in fastboot mode, but its stuck at this message:
target reported max download size of 268435456 bytes
sending 'recovery' (8394 KB)...
Without stock recovery, I can't flash the Root.zip file to get root access.
Click to expand...
Click to collapse
yes i know when you flash this rom you will lose your root.
and why are you flashing it in fastboot mode ?
this rom is flashable in stock recovery only dont do that.
and what were you doing while you got that error message ?
ashish_zarekar said:
yes i know when you flash this rom you will lose your root.
and why are you flashing it in fastboot mode ?
this rom is flashable in stock recovery only dont do that.
and what were you doing while you got that error message ?
Click to expand...
Click to collapse
I meant, I lost the stock recovery as well. SO I was trying to flash the stock recovery image file in fastboot mode as usual. But it gives me error as I mentioned earlier. My phone is connected to PC while I try to flash the recovery image file. I suspected the drivers got erased, but thats not the case.
Only when I install stock recovery, the Root.zip file can be flashed using it ( to root the phone again). Because flashing the zip files from new Cyanogen Recovery is not at all working. Some R/W or backmap/bitmap kind of issue comes when I try to flash using the updated recovery.
feeroz123 said:
I meant, I lost the stock recovery as well. SO I was trying to flash the stock recovery image file in fastboot mode as usual. But it gives me error as I mentioned earlier. My phone is connected to PC while I try to flash the recovery image file. I suspected the drivers got erased, but thats not the case.
Only when I install stock recovery, the Root.zip file can be flashed using it ( to root the phone again). Because flashing the zip files from new Cyanogen Recovery is not at all working. Some R/W or backmap/bitmap kind of issue comes when I try to flash using the updated recovery.
Click to expand...
Click to collapse
what? you lost your stock recovery ? how is it possible ? it means you dont have any recovery ?
have not face yet.
and how did you flash root.zip file using stock recovey
stock recovery does not have option to flash. it always have update option.
you can flash root.zip file using custom recovery only.
Thankyou for this post... can you please advice to update this ota
I am in stock rom with twrp recovery + sandy kernel
what are the steps to update this ota... can you tell step by step
thank you in advance
m_rajaganesh said:
Thankyou for this post... can you please advice to update this ota
I am in stock rom with twrp recovery + sandy kernel
what are the steps to update this ota... can you tell step by step
thank you in advance
Click to expand...
Click to collapse
DO NOT SPAM.
read carefully i already told the steps in my first POST
download stock kernel and flash it.
download stock recovery and flash it.
now download whole rom from my post and flash it.
ashish_zarekar said:
what? you lost your stock recovery ? how is it possible ? it means you dont have any recovery ?
have not face yet.
and how did you flash root.zip file using stock recovey
stock recovery does not have option to flash. it always have update option.
you can flash root.zip file using custom recovery only.
Click to expand...
Click to collapse
I am sorry, I put it in wrong terms.
The CWM recovery (having basic look with text in blue that can be opted only using hardware buttons and not touch) is not shown for me now. The Cyanogen Recovery it shows me now looks new (with Apply Update option that can be opted by touch as well). THis new recovery fails whenever I try to flash any zip with it. The error being R/W error or something.
With the old recovery (CWM recovery) I could/did flash the Root.zip. After flashing this full ROM (having the patch), the old recovery is lost. It shows only the new recovery. And with it the Root.zip can not be flashed as it fails, as I mentioned earlier.
May be I will get you screenshots of the new Cyanogen recovery to explain what I mean.
Old CWM Recovery:
New Cyanogen Recovery:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 2.8.7.0 for the Samsung Galaxy J5
Hey everyone. I have decided to build TWRP recovery for the Galaxy J5.
First I would love to thank @bhattjunaid for testing this since I don't own this device, @celta1976 For managing to get this working on Locked bootloader models and his Instructions (Instructions In 1st Comment of the post), @serdotlinecho For the instructions how to fix Bootloop into TWRP (Instructions in 1st Comment of the post) and TeamWin for the amazing sources that are still supported.
DISCLAIMER : I AM NOT RESPONSIBLE VOIDING YOUR WARRANTY OR ANY DAMAGE CAUSED TO YOUR DEVICE EVEN THOUGH NOTHING SHOULD GO WRONG IF YOU DO EVERYTHING RIGHT! KNOX WILL BE TRIPPED. ALSO... I AM NOT RESPONSIBLE FOR WW3 OR A ZOMBIE OUTBREAK
Ok, Now to the interesting part
Already tested on:
- Galaxy J500F Working
- Galaxy J500H Working
- Galaxy J5008 Working - Instructions in 1st post of this thread! - (Locked bootloader)
- Galaxy J5007 Not tested yet
- Galaxy J500G Working
- Galaxy J500M Working
- Galaxy J500N0 Not tested yet
- Galaxy J500FN Working
- Galaxy J500Y Not tested yet
Note : This should work on all models. However, just to be sure, if you own a J5 model that has not been tested yet, please post a confirmation below
Bugs
- Brightness slider
- PC mounting (but adb should work)
- Reboot into recovery mode from/via TWRP not working
Changelog
07.10.2015
Code:
TWRP Has been made
Screenshots
Instructions
Here are some notes before you start :
Make sure you enabled the unlock bootloader option in the developer's settings.
THIS WILL SET KNOX TO 1
I am not responsible for voiding your warranty with this, it's your choice.
1. Download the PC USB drivers for your Phone
2. Download TWRP (link below)
3. Download Odin 3
4. Turn off your phone
5. Boot into download mode (Power + VOL down + Home)
6. In menu select continue (VOL up)
7. Now connect your phone to your PC
8. Open Odin. Make sure your device is recognized.
9. Click PDA on older Odin versions or AP on newer versions
10. Find TWRP
11. Click start and wait until it's done.
12. Reboot into recovery by booting with VOL UP + HOME + POWER and have fun.
Download
PLEASE DO NOT MIRROR UNLESS I GIVE YOU PERMISSION! IF YOU NEED PERMISSION THEN PM ME!
If you don't want to risk loosing your data do a backup!!!!!!!!!
TWRP 2.8.7.0
Source code : https://github.com/TWRP-J5
Have fun!
Instructions for specific models
1. How to flash TWRP with locked bootloader by @celta1976
2. How to fix TWRP bootloop (Device restarts into TWRP every time) by @serdotlinecho
1. Instruction for Locked Bootloader Models by @celta1976
1. Download CROM Services, file .apk here : http://forum.xda-developers.com/showpost.php?p=60204006&postcount=5 and install it. Then execute it on the phone.
2. Next up flash this file via odin : https://download.chainfire.eu/718/CF...xx-sme500h.zip
And finally, install TWRP !!
2. How to fix TWRP bootloop by @serdotlinecho
If your TWRP is bootlooping please do the following :
1. Go to sammobile and download the stock Firmware and extract the zip
2. Put your phone into download mode
3. Connect your phone with your pc
4. Open odin and select PDA on older versions or AP on newer versions.
5. Select the stock firmware
6. Click start and wait until its done.
7. Re-flash TWRP.
8. Now you should be able to boot into TWRP and system
installed on J500FNXXU1AOG1 confirmed it works fine
Good to know.
wegiwegi said:
installed on J500FNXXU1AOG1 confirmed it works fine
Click to expand...
Click to collapse
Thanks! :good:
It works fine on SM-J500G too. But I have to flash the stock firmware after flashing twrp with odin on my rooted device. My device cannot boot into system, keep booting into twrp every time I reboot from twrp menu. After flashing stock firmware and and re-flash twrp, my device can now boot into system when I choose reboot from twrp menu. Thanks for the twrp tar file.
serdotlinecho said:
It works fine on SM-J500G too. But I have to flash the stock firmware after flashing twrp with odin on my rooted device. My device cannot boot into system, keep booting into twrp every time I reboot from twrp menu. After flashing stock firmware and and re-flash twrp, my device can now boot into system when I choose reboot from twrp menu. Thanks for the twrp tar file.
Click to expand...
Click to collapse
Thanks! I have posted the fix
CTXz said:
Thanks! I have posted the fix
Click to expand...
Click to collapse
can you make fixed recovery ? because i edited some system files when i reflash stock rom all reset to origins
can you make fixed recovery ? because i edited some system files when i reflash stock rom all reset to origins
Click to expand...
Click to collapse
Did you backup data? What model do you have
CTXz said:
Did you backup data? What model do you have
Click to expand...
Click to collapse
yes
j500g
mlm1102003 said:
yes
j500g
Click to expand...
Click to collapse
So if I understand correctly... You restored a old backup but it didn't restore the apps. If that's the case, did it say any errors when you tried to restore
CTXz said:
So if I understand correctly... You restored a old backup but it didn't restore the apps. If that's the case, did it say any errors when you tried to restore
Click to expand...
Click to collapse
no
i have edited some system files
when i want to factory reset
it go to stock recovery
i want a custom recovery
which do factory and dont stuck or boot loop to recovery
i have used your recovery
when i try to factory reset it do factory reset but after that phone boot to recovery (not system)
mlm1102003 said:
no
i have edited some system files
when i want to factory reset
it go to stock recovery
i want a custom recovery
which do factory and dont stuck or boot loop to recovery
i have used your recovery
when i try to factory reset it do factory reset but after that phone boot to recovery (not system)
Click to expand...
Click to collapse
Sadly I really don't know what could cause the issue. My best guess is the boot.img . Once I am at home I will send you some instructions how to flash the boot.img
OK instructions.
To flash bootimg download the stock Rom from sammobile. Then open the ZIP. Next open the ZIP inside the ZIP by removing .md5 . then take out the boot.img. once you enter twrp flash the Boot.IMG.with the flash IMG option
I just tried it in my j500m and it worked! Now just waiting for a great rom
Enviado desde mi SM-J500M mediante Tapatalk
bighleo114312 said:
I just tried it in my j500m and it worked! Now just waiting for a great rom
Enviado desde mi SM-J500M mediante Tapatalk
Click to expand...
Click to collapse
Thanks!
Is there a way to root this device without using PC ? like one click root or something like that ?
I dnt have access to PC and need to root the device.
Hello. I know that this post is off topic, but this is the only "popular" thread for this phone and it doesn't have it's own forum yet.
@CTXz : I hope you won't get mad on me for mentioning you Maybe you can answer me about what I wrote below.
I got Samsung Galaxy J5 SM-J600FN yesterday. It is a nice phone for 200euros... But I experienced a problem. When I put a call in speaker mode, the person with who I'm talking won't hear me after few seconds and when I switch back to normal mode (speaker off) he can hear me. Now it started to happen in normal calls too. I did put network in 2G to consume less MB, I don't know if this might be a problem.
Anybody else experienced this? I'm wonder if it is a hardware issue or software issue.
Also, the volume buttons and power button is moving lil bit in left-right, I don't know if is a problem at all because are working. So, people who has this device, please let me know if buttons are same to you and if you experienced that call problem.
Thank you! Have a nice day! Robert.
PS: I'm sorry if my English is bad
Force said:
Hello. I know that this post is off topic, but this is the only "popular" thread for this phone and it doesn't have it's own forum yet.
@CTXz : I hope you won't get mad on me for mentioning you Maybe you can answer me about what I wrote below.
I got Samsung Galaxy J5 SM-J600FN yesterday. It is a nice phone for 200euros... But I experienced a problem. When I put a call in speaker mode, the person with who I'm talking won't hear me after few seconds and when I switch back to normal mode (speaker off) he can hear me. Now it started to happen in normal calls too. I did put network in 2G to consume less MB, I don't know if this might be a problem.
Anybody else experienced this? I'm wonder if it is a hardware issue or software issue.
Also, the volume buttons and power button is moving lil bit in left-right, I don't know if is a problem at all because are working. So, people who has this device, please let me know if buttons are same to you and if you experienced that call problem.
Thank you! Have a nice day! Robert.
PS: I'm sorry if my English is bad
Click to expand...
Click to collapse
Hey no i'm not mad
The calling issue is most likely software. It's also quite common. Try to wipe cache. If the problem presists you can make a twrp backup and install the stock rom again. Then restore the backup data etc.
The buttons are totally fine. All my Samsung phones/tablets have that. Why? Dunno.
CTXz said:
Hey no i'm not mad
The calling issue is most likely software. It's also quite common. Try to wipe cache. If the problem presists you can make a twrp backup and install the stock rom again. Then restore the backup data etc.
The buttons are totally fine. All my Samsung phones/tablets have that. Why? Dunno.
Click to expand...
Click to collapse
Gonna wipe the cache now.
About buttons, you gave me that peace of kind by saying that I was worried that could get break soon or that I got a device with problems. At my previous phone named Galaxy S Advance the buttons were moving too but less and I have used it for 2+ years, I never checked buttons before tho.
I won't install other stock Rom yet until I'm sure that I won't break that Knox. I'm new to this Knox protection and I haven't read much about it. I already miss so many root apps from previous phone
May I ask you in how much time does charge your J5? Mine charged in 4-5 hours when it was powered off, I did this two times and now I think i won't repeat it again.
Thank you alot for your answer.
If you reflash stock it wont break stock. But if you flash twrp it will