I have recently purchased a Nexus 5x. I have rooted it, installed TWRP recovery and cyanogenmod. All was working fine except for the camera. In any app that uses the camera it would just show it as blank and would crash. I later installed Franco kernel and everything was fine. Then I booted into TWRP and made a backup of the device, I did not do anything else. When I tried to reboot it got stuck in a bootloop. I tried everything. I wiped the cache. I factory reset. I reinstalled cyanogenmod. Nothing works. If anyone has a solution or the same problem please respond.
This is the nightly: cm-13.0-20160323-NIGHTLY-bullhead
This is the kernel: kernel-cm-13.0-20151129-d855-signed
Pls help.
Related
I installed Cyanogenmod 9 RC2 by ivendor on my Samsung Galaxy S Plus, along with suggested gapps package, but none of the Google apps shows when the phone starts. I tried reflashing, purging data and cache files, installing gapps fixer but none of it helped. I even installed store app manually but it closes immediately after starting. It looks like I'm stuck with it. How do I solve this annoying issue?
Please, help
ivendor gapps problem
mico.barac said:
I installed Cyanogenmod 9 RC2 by ivendor on my Samsung Galaxy S Plus, along with suggested gapps package, but none of the Google apps shows when the phone starts. I tried reflashing, purging data and cache files, installing gapps fixer but none of it helped. I even installed store app manually but it closes immediately after starting. It looks like I'm stuck with it. How do I solve this annoying issue?
Please, help
Click to expand...
Click to collapse
I vave same problem ,not with rc2 but with all ivendr"s roms
when you find solution please post!
Anyone?
I finally made it .
I flashed with
Code:
recovery-clockwork-6.0.1.2-ariesve.tar.md5
, and with ivendor firmware, but I couldn't make gapps to work. I tried flashing with
Code:
recovery-clockwork-5.5.0.4-ariesve.tar.md5
, wiped data/cache/dalvick, then updated with ivendor firmare, and it all went well. I got stuck in CWM recovery though, but after flashing back to
Code:
recovery-clockwork-6.0.1.2-ariesve.tar.md5
again, the Google configuration screen showed up after booting...
Finally
solved
mico.barac said:
I finally made it .
I flashed with
Code:
recovery-clockwork-6.0.1.2-ariesve.tar.md5
, and with ivendor firmware, but I couldn't make gapps to work. I tried flashing with
Code:
recovery-clockwork-5.5.0.4-ariesve.tar.md5
, wiped data/cache/dalvick, then updated with ivendor firmare, and it all went well. I got stuck in CWM recovery though, but after flashing back to
Code:
recovery-clockwork-6.0.1.2-ariesve.tar.md5
again, the Google configuration screen showed up after booting...
Finally
Click to expand...
Click to collapse
siimply flashng this gapps-gb-20110114-signed
hello,
have a problem with my galaxy s2:
just updated my s2 to the latest nightly of cyanogenmod "cm-10.2-20130921-NIGHTLY-i9100".
my old kernel was: dorimanx 9.34 + rootbox 4.2
after update it booted to cyanogenmod and worked for few minutes. then it showed some errors like "android.core.*" stopped working. after reboot it can´t even boot on recovery mode. download mode is still availabile, flashing to old kernel + firmware doesn´t help anything.
same probelm: no boot (stuck at bootscreen)
anyone has an idea what to do?
thanks in advice
Have you tried wiping data in recovery when it stuck in boot loop.
Also did you format system before you flashed cm 10.2
I got it to work fine on my S2. Played around on it for a few hours, got everything installed. Then bam, upon restart I get boot loop. Wiping cache/delvik didn't work. Various tutorials recommend repeating the install process and/or continuing to factory wipe until it works.
EDIT: I have repeated the process. Make sure that before you install CM/Gapps, you factory reset, wipe cache and delvik. Have reset the phone several times and it now works.
Hi All,
Last week, I flashed my LG Nexus 4 (16GB) phone with stock Android 4.4 (Official Image), before that I was on CyanogenMod 10.1.3 Stable.
Now, for some reason I didn't like the stock 4.4 and tried to Flash back my CyanogenMod 10.1.3 from CWM "Install ZIP" but the problem I'm facing is that it CyanogenMod doesn't boot, hangs on "Spiral Splash Screen". Then I tried Flashing CM 10.0 stable, still loops into boot forever and at times boots (after 15-20 minutes of booting on spiral splash screen) and doesn't recognise SIM card, Camera, Storage, WIFI or anything.
Then after getting fed up with this I tried flashing MIUI V5. This also takes a 15-20 to boot and fails to recognise - SIM, WiFi, Camera etc.
So lastly like a loser I flashed back my Android 4.4 it works fine.
I've my boot-loader in unlocked state.
and Yes before flashing CM or MIUI, I did - wipe data/factory, wipe cache, wipe dalvik cache from CWM Recovery.
So I want to get back into CyanogenMod 10.1 stable. Help me out with this.
Restoring Nexus 4
prakharprasad said:
Hi All,
Last week, I flashed my LG Nexus 4 (16GB) phone with stock Android 4.4 (Official Image), before that I was on CyanogenMod 10.1.3 Stable.
Now, for some reason I didn't like the stock 4.4 and tried to Flash back my CyanogenMod 10.1.3 from CWM "Install ZIP" but the problem I'm facing is that it CyanogenMod doesn't boot, hangs on "Spiral Splash Screen". Then I tried Flashing CM 10.0 stable, still loops into boot forever and at times boots (after 15-20 minutes of booting on spiral splash screen) and doesn't recognise SIM card, Camera, Storage, WIFI or anything.
Then after getting fed up with this I tried flashing MIUI V5. This also takes a 15-20 to boot and fails to recognise - SIM, WiFi, Camera etc.
So lastly like a loser I flashed back my Android 4.4 it works fine.
I've my boot-loader in unlocked state.
and Yes before flashing CM or MIUI, I did - wipe data/factory, wipe cache, wipe dalvik cache from CWM Recovery.
So I want to get back into CyanogenMod 10.1 stable. Help me out with this.
Click to expand...
Click to collapse
Hello Prakhar,
I would suggest you to first download the official image of Nexus 4 for android 4.3 and flash it from https://developers.google.com/android/nexus/images and then you can try to flash CM 10.1.3 from the CWM Recover Console. Hope this helps!
I would also like to point you out to https://developers.google.com/android/nexus/drivers which contains drivers for your phone's camera, etc. you can download those binary and flash it one by one through your recovery console, which might fix your issues.
It worked !
Downgraded to stock 4.2.2 then Flashed CM 10.2 RC1 from CWM Recovery !
Thanks a lot U3ViaGFsbyA6UA==
hello,
i never posted here before but i am following this site for a while and flashed lots of roms using the data here.
i got into a problem trying to flash the kitkat on my HTC sensation 4G.
i am using ATM the android 4.2.2 CM 10.1 albinoman887 rom.
i tried installing the android 4.4.1 according the instructions posted by android1234567 here:
http://forum.xda-developers.com/showthread.php?t=2530073
i did factory factory reset, cache wipe, and davlik wipe
after that flashed the Kernel Aroma installer, the rom and the gapps from this link.
after i flashed them i rebooted and the phone doesnt pass the reboot screen, got stuck on it for few seconds and then restart and stuck again.
could anyone help me resolve this?
thanks ahead.
Dan
ok
if mean bootloop then again do the same step but wipe the dalvik cache,data,cache means clean your phone and then install the rom u will out of boot loop
tried it, it didnt work, still bootlooping.
when i install the gapps file it says it detects 4.4 rom.
any other ideas?
thanks for the help
Hey I flashed a few days ago the CM nightly from 18.07. It was successfully installed and everything was fine. The next day my phone suddenly restarted itself and is now stuck in a bootloop. I really don't know what to do, I've already tried to wipe cache and to install the previous ROM, which was working fine. Idiotically i don't have a backup, so if possible I don't want to lose my data. I'm really desperate and need your help.
Thanks