Hi there,
My LG V10 finger print sensor has not been functioning lately, whenever i try to unlock the device using my fingerprint, it keeps showing the message " Cover the power key with your finger! ", and it never unlocks, when i go to register my fingerprint, it doesn't work either, but SOMETIMES it works if i push the power button harder and it takes more than 3 minutes to register my fingerprint 100%!
Anybody knows if this is a hardware malfunction or a software bug?
I have tried a factory reset, nothing happened!
Thank you all in advance!
If it is in a case it could be having this issue. There was a software update that fixed it for my Verizon V10. Try with out the case.
hmmm.same with me, on MM. is it not working? pressing power key would give me a prompt that i need to press slowly though.huhu
Sent from my LG-F600K using Tapatalk
im having the same issue
same thing here but my started after marshmallow update, i have to wiggle the button with my finger and than it registers. and no its not a case issue. im guessing its the hardware issue.
hmmmm... just wiggling and it worked? we do have the same issue dude
so its fixed or not at MM update?
Mine stopped, I reported to LG, they me send it in and they fixed it. Took about a week
send in repair
hi. After you got the phone back from LG, did the fix last? cause I'm wondering is it just a matter of replacing the fingerprint sensor itself or if it was a software issue which I believe. Because the problem I'm having is that it just doesn't offer the option to open the phone up with the fingerprint scanner but when it does it scans fine although half of the time I have to enter a pin which defeats the purpose of me having the fingerprint scanner. It's like it's being turned off and on or something.
nadershakhshir said:
Hi there,
My LG V10 finger print sensor has not been functioning lately, whenever i try to unlock the device using my fingerprint, it keeps showing the message " Cover the power key with your finger! ", and it never unlocks, when i go to register my fingerprint, it doesn't work either, but SOMETIMES it works if i push the power button harder and it takes more than 3 minutes to register my fingerprint 100%!
Anybody knows if this is a hardware malfunction or a software bug?
I have tried a factory reset, nothing happened!
Thank you all in advance!
Click to expand...
Click to collapse
check this video, and subscribe for more, soon I'll post more videos about lg phones...:good:
---------- Post added at 10:27 AM ---------- Previous post was at 10:26 AM ----------
SeeZaar said:
check this video, and subscribe for more, soon I'll post more videos about lg phones...:good:
Click to expand...
Click to collapse
That will help you
Related
Hi, I would know if you have this issue too.
My fingerprint sensor works well, no problem about the speed or recognition.
But, often, it just wont work, I mean there is the vibration but it wont unlock the phone, at the bottom there is: can not use the fingerprint (I don't know in english it's in french).
I have to unlock with my code or layout. I lock again and now it works!
It works for a moment, and maybe one hour later it doesn't work again I have to unlock manually to make it work again.
Try removing and re-adding your fingerprint, make sure you scan all parts of your finger.
It is not recognising your finger as often as it should.
I have a same problem. If I turn off/restart my phone the fingerprint stop working. I must re-adding or again restart the phone to start work again. But if working, he work good until next restart. Sometimes after turn off/restart he continues to work. I think it has its own opinion when to work and when not
When I say there is an issue, it's not about the recognition.
When it doesn't, the screen don't turn on and double vibration, it's ok.
But sometimes, the screen turn on, and just say that is not possible to use fingerprint (with one vibration)
I just deleted and set again my fingerprint, and the problem is still here.
So it recognize my fingerprint (screen on and one vibration) but doesn't want to unlock, just say it's not possible to use fingerprint..
This happens to me only first time after reboot.
I think that's a security, and a will from LG. So it's not a bug, it's a feature
RealLordK1 said:
This happens to me only first time after reboot.
I think that's a security, and a will from LG. So it's not a bug, it's a feature
Click to expand...
Click to collapse
yes I think that happen when the state change, like wifi, BT or other.
But it's annoying when it happens 20 times per day.
I hope I'll be able to change that with root..
anych said:
I have a same problem. If I turn off/restart my phone the fingerprint stop working. I must re-adding or again restart the phone to start work again. But if working, he work good until next restart. Sometimes after turn off/restart he continues to work. I think it has its own opinion when to work and when not
Click to expand...
Click to collapse
As others have said. I think it's a security feature that makes you use the lock code after a reboot. My G5 does the same things as well as my iPhone 5S.
As for the fingerprint scanner misfiring. I noticed that while I'm using the always on display. When I first take the phone out of my pocket. It takes a second for the always on display to pop up. It seems like the fingerprint won't read my print until that display pops on.
You're issue sounds a little different. I'd just figure I'd mention some of my findings.
I just want to remember that my issue is not about a reset. But all day long.
So at this moment I'm the only one who have this issue.
(I also have the 10c update and issue still here)
Thanks for your replys anyway.
I get it about 2 or 3 times a week & like you, not after a reboot. It works again after pin entry.
Strange but infrequent enough not to bother me.
Sent from my LG-H850 using Tapatalk
If in future you actually face any fingerprint sensor issue then this link would help you:
http://recomhub.com/blog/lg-g5-fingerprint-sensor-not-working/
Hi,
I have problem with fingerprint reader on my elephone p9000. I am using latest softer version and i have this problem from the begining.
So when i try to add new fingerprint it recognize my finger every fifth time, and after i set my fingerprint and lock phone it recognize and unlock phone first few time, and after that i seems like he forget fingerprint and i cannot use it.
Is this system or hardware problem?
After update i factory reset my phone but this does not help.
I find youtube video with the same problem
If you have any sugestion please.
I have the same problem too. I think you need to press the finger well for getting a good result.
I hope that this problem have a solution.
Sent from my P9000 using Tapatalk
I had loads of problems with the fingerprint sensor.. I was scanning itself (no finger on the sensor, vibrates and returns "too many attempts), working only when the screen is on, not working at all, working 1/10 times I tried, etc...
My problems were all software related (some were registering technique related). It's really not possible that two phones that you have ordered had the same problem.
I have managed to fix mine by combining Resurrection Remix and DarkSense Kernel 1.2.0, now it works 100% of the time. (1.1.0 rendered the fingerprint sensor useless). XPosed and ROM Toolbox seemed to break the fingerprint sensor as well.
I know it might sound silly, but try a different fingerprint registering technique. What I do is I lightly touch the sensor with the centre of my fingertip for the first time, lift the finger up, rotate it by ~5 degrees and lightly touch it again. Do that until most of the finger tip is registered. I'm only saying this because I've seen people touching and "smearing" the fingerprint sensor, expecting it to work. Imagine it's a camera, give it pictures of your fingerprint.
I don't know if this is useful, but after a few months of trial-and-error I've managed to find what was wrong with mine.
I just installed the AEROM V5 and now it works about 90% of the time, which is more than my Nexus 5X did.
hi,
i had a bootloop issue, so i ve sended it to a friends who leaves in corea (f600k) and she has bring it to a lg repair center, and in 10 min they changed the motherboard, fixed
well not quite, now the fingerprint is not working, in fact if i want to register a fingerprint i need to press the sensor and keep it pressed and move the finger around, .i ve successfully record one finger but i can t use it, cause once you press the sensor it ask you if you want to turn the device off
what do you think that can come from? do you think it s software or hardware?
any tips are welcome!
thxx for your time
fixed i ve open the phone an relocate the map
I bought an S9+ on launch day long story short it lasted 2 weeks before it would just shut down itself anytime you put it to sleep (screen off). I figured out after doing some tests and research that it would only do it when the fingerprint scanner was turned on. I sent it to Samsung which if anyone has had the pleasure of dealing with their customer service knows it's a nightmare to say the least. At least 2 week turnaround time but in the end they did come through and send me a brand new in box s9+.
Fast forward about a month later the new one is doing the EXACT same thing. If I turn the fingerprint scanner off and just use facial unlock it works fine. I really don't want to go through their customer service again and be without a phone for 2 weeks. I think this very well could be a software issue though factory reset does not solve the issue neither does erasing fingerprint and re entering them.
Has anyone else experienced this? I saw searching google that it is actually an issue others have had and like me, their replacements have all done the same thing. I am yet to find a thread with a solution though. What do you guys think? I'm actually wondering if perhaps rooting it and putting a custom rom on it would help.
Honestly, I have not heard of this before. After you try with fingerprint can you turn the device on at all?
Do you have any apps that may in the background that captures button inputs or fingerprint apps that capture slide movements or anything?
Scott said:
Honestly, I have not heard of this before. After you try with fingerprint can you turn the device on at all?
Do you have any apps that may in the background that captures button inputs or fingerprint apps that capture slide movements or anything?
Click to expand...
Click to collapse
Nope it seems to go off within seconds with the fingerprint scanner enabled. Even if I try to wake it up with the power button it seems to be dead. I've had the phone for about a month now and haven't recently added any new apps. I don't believe I have any apps that would be capturing anything. Is there any app I could use to check and see if perhaps I have something app related thats causing this?
I do believe it's gotta be software related.
You can type *#0*# in the dialer, then go to sensor and scroll down to find fingerprint test
Hi,
I've read this thread and disabled battery optimisation for "com.samsung.android.biometrics.app.setting"* on my Note 10+ and Tab S6 (Wifi).
On both devices the fingerprint scanner is faster :good:
... and it seems to fix recurrent unlock problems with my Tab S6 too
* on some devices it's named "com.samsung.android.biometric"
Important:
it's not known yet if this might have any negative side effects (as battery drain or burning out the fingerprint sensor).
I also did it. But it doesn't make the fingerprint scanner faultless...
Hi, am I the only one having a problem with the fingerprint reader after upgrading to Android 10? ?
I have probably tried everything. Factory reset and clear cache partiotion do not help. The problem returns randomly. The reader stops working, and when I try to get to the settings I have the message: "Finger print sensor calibration needed " or "finger print sensor doesn't respond, try to reboot your device . If the problem persists, contact support "
I checked everywhere and there is no such thing as calibrating the fingerprint reader. Technical support also couldn't help me with the problem, they only recommended to send the tablet for service. ?
The problem has never appeared before the update so I bet that the problem is new software.
Any advice what else I could try?
The reader, when it starts to work, works much better than before the update, unfortunately more and more often it does not work at all.
The strangest thing is that sometimes it starts working after a regular restart. I have no idea what to think about it.
Something similar... It sometimes works like a charm. It sometimes stops working, but no message and no way to use it in order to activate the tab. In that case I have to use an alternative method to. I suppose a fix could be released after this update to Android 10...
solved
Hi there,
I've solved this issue. I have tab s6 4-5 month and I couldn't even register the fingerprint. today I tried again and I found out that you have to touch the scanner very gently, do not press firmly. so I could register 3 fingerprints and it is working. even with unlocking if you press harder it won't work you have to touch slightly and it is working. still it is not reliable as other scanners but it works. i'm providing the video, you can see when I touch gently it is working, but If I press harder it won't register.
h t t p s://drive.google.com/file/d/1BegH3jbh3QxAuwLqSY8fdiHFbZ0MU2Zc/view?usp=sharing