Related
Usb port of my Samsung infuse 4G isn't wotking, when connected it charges but pc doesn't recognize. I've tried with different USB cables. when camera is opened it gets stuck and shows black screen. i thought this could be a problem with ROM but i was unable to update ROM as my PC doesn't recognize it, i'm able to enter download mode using OSB jig but still odin doesn't recognize it. it has Android 2.2.1 installed on it and it has not been rooted. Any help would be highly appreciated thanks in advance!!
backup and restore
humdhoon said:
Usb port of my Samsung infuse 4G isn't wotking, when connected it charges but pc doesn't recognize. I've tried with different USB cables. when camera is opened it gets stuck and shows black screen. i thought this could be a problem with ROM but i was unable to update ROM as my PC doesn't recognize it, i'm able to enter download mode using OSB jig but still odin doesn't recognize it. it has Android 2.2.1 installed on it and it has not been rooted. Any help would be highly appreciated thanks in advance!!
Click to expand...
Click to collapse
did you try to make a backup of your contacts on your SD card and do a factory reset of the phone. It might be some setting. It happened to me couple of times on my HTC while working with the HTC stock ROM.
If it didn't work you might try to follow this guide
mutantkeyboard said:
did you try to make a backup of your contacts on your SD card and do a factory reset of the phone. It might be some setting. It happened to me couple of times on my HTC while working with the HTC stock ROM.
If it didn't work you might try to follow this guide
Click to expand...
Click to collapse
I've already done factory reset several times and wiped the data using recovery mode too, but no improvement. thanks
humdhoon said:
Usb port of my Samsung infuse 4G isn't wotking, when connected it charges but pc doesn't recognize. I've tried with different USB cables. when camera is opened it gets stuck and shows black screen. i thought this could be a problem with ROM but i was unable to update ROM as my PC doesn't recognize it, i'm able to enter download mode using OSB jig but still odin doesn't recognize it. it has Android 2.2.1 installed on it and it has not been rooted. Any help would be highly appreciated thanks in advance!!
Click to expand...
Click to collapse
I am having the same issues. I have 2 of these phones that are doing the same thing. Both have been rooted but NO new ROMS have been downloaded. Both phones worked fine with the stock USB cable until 2 days ago & I haven't been able to get either to be recognized by 2 seperate computers. One is Win 7 32bit, the other is XP. I can get them to show 2 portable drives; however, when I click on either, or try to drag & drop in them, it tells me to insert a disk.About to go ape crappers! HELP!
I have this exact same problem on my Infuse: USB port works for charging but the computer doesn't recognize it and the device acts as if I plugged it into a USB -> AC power adapter, and when I bring up the camera it's just a black screen and controls that don't do anything. I just tried resetting to factory defaults, even rooted it and flashed to another ROM (ZEUS) and it's still having the same problems. I'm just wondering whether it's a hardware or software problem. Anybody figured out a fix yet?
I am owner of the Galaxy S2. I updated yesterday to SuperNexus Jelly Bean ROM, didn't liked it. I restored my device to CM9 which i was using for a month without any problems. Then it started, computer couldn't recognize the phone anymore. Its like that SuperNexus broke something i don't know. I reformatted my Win 7 Ultimate x64 and installed fresh new CM10 - but after all my computer and S2 don't like each other - USB device not recognized. Chaos. I asked my friend to come over just to test with his S2 (he's on stock ICS 4.0.3 or 4.0.4), and when i plug his phone into my computer, everything works flawlessly. I tried mounting in recovery, i tried with and without usb debugging, Odin doesn't find phone neither, tried updating drivers - no luck... Dialing *#7284" just gives me "connection problem or invalid MMI code". Need help on this please!
You can check THIS thread. The one HERE , and also THIS thread.
I've read them all, tried every advice, but phone still isn't reacting to anything. So my problem is that phone couldn't connect to a computer, well it connects but it states "USB device not recognized", it charges but that's all. Everything started with Custom ROM SuperNexus. I've done these steps so far:
1. Reformatted my computer OS, which is Windows 7 Ultimate x64
2. Downloaded CM10 over my phone, get into recovery --> factory reset, wipe cache, wipe dalvik, format system, install ROM, wipe cache, wipe factory
3. I tried on my computer, tried on my old computer with Win XP x86
4. My friend's Galaxy S2 is working like a charm with MY cable on MY computer, which makes me believe that there is some defectiveness in my phone
5. I tried cleaning MicroUSB port with tooth pick, ear-cleaning pick (or how do you call it), needle with some paper wrapped around it, tried blowing in it
6. I tried with different USB ports, front ones, USB 3.0 - still no luck
7. I tried flashing Wanamlite and Neat ROM-s, still the same problem
I'm using Airdroid now, but i really need to know what's the problem! I have already ordered a new parts on E-Bay and I'm having high hopes about that solution. Im not able to post link to E-bay item, but search it under Item Number: 150904945773. Any other advice is really highly appreciable. Thank you
Try downloading the Rom over WiFi, or Hardline instead. Have you tried a different USB Cable ? Also I'm not able to check that Ebay # right now.
TEAM MiK
MikROMs Since 3/13/11
eBay item is this: New Samsung i9100 Galaxy SII S2 Charger Charge Port Flex Cable Replacement parts
OP, I'm hoping it works for you. You seem to be going in the right direction with your troubleshooting.
Well, i've downloaded this ROM (CM10) via WiFi, now i can do it over Airdroid too. But is there a way to flash Stock Original Samsung ICS in recovery? Or is it only available in Kies and Odin? I came across "Mobile Odin", do you guys have some experience with it, is it safe to use? How big are chances anyway that USB will work with stock ROM? Someone told me "your USB port on phone is OK, if it's charging it's not broken", so I'm thinking that it is not a hardware issue after all? And BTW i used several cables, and three different computers. My girlfriend have SGS3, i tried it like 2 hours ago with her cable on her computer with no luck (and of course her phone have no problems to connect to that computer using that cable). Thank you
I would try a Stock Rooted Rom, and see if that works correctly. If not try connecting the Device, and reboot the PC with the Device plugged in.
How to install stock ROM if i cannot get Kies or Odin to recognize phone? Via Mobile Odin?
kuleee said:
How to install stock ROM if i cannot get Kies or Odin to recognize phone? Via Mobile Odin?
Click to expand...
Click to collapse
Try USB solutions from My Android Solutions or Mobile Odin like http://forum.xda-developers.com/showpost.php?p=28302093&postcount=4789 ( procedure is same but written for Korean SGS 1
Guys let me tell you that I'm grateful to you, cause this Mobile Odin worked and my Stock Rooted ROM worked in connecting with PC. But not on first try when i got into a newly flashed Stock Rooted Firmware, i've let it to do his stuff, update what he needed to update blahblah. Then i tried to connect my cable - it didn't work. I cursed, i cursed so bad. Then i considered to give it another shot, rebooted the phone - and voila! Everything works, i tried 2-3 times and its working. Obviously SuperNexus started my problems, they couldn't be repaired by any other ROM i tried (i tried CM9, CM10, Wanamlite, old Wanamlite with MTP enabler, Neat ROM)... Then with Mobile Odin everything just worked. Dunno what really was the problem. Thank you all
Glad you got it sorted
TEAM MiK
MikROMs Since 3/13/11
Well, the day before it occurred to me that I'd like to install a custom ROM, therefore I went on to plug my phone into my PC and for my surprise, the phone didn't pop that MTP warning and the PC did not recognize it.
So I went around and changed USB ports, cables and PCs, same thing.
Decided to try Mass Storage mode, when I press the START button and put in the cable it goes back into the main start screen.
So I went on and tried that *#7284# trick people used since apparently 4.0.3 bugged some crap stuff in the phone, no success either.
Strangely enough I can connect the "pendrive dongle" and it will map pendrives.
Well, I don't have my phone rooted or with SU so that means CWM from app store won't be able to install the recovery module, and I can't install... you get the picture.
Nor ODIN nor HEIMDALL will recognize my phone in recovery mode, wich suggests that the data lanes on my phone went somewhat dead.
Finally, any cable I plug in the phone says it's charging my device, wich leads me to belive that the usb port is dead.
Anyone had this issue?
Anyone can confirm me I'll have to take it to Sammy's assistance?
Sure looks like the USB is dead/dying.
Sent from my digital submersible hovercraft.
So I got one more question, can I root and/or install CWM so I do not stay dependent of the USB to update it or I do need to plug in the USB to install CWM through ODIN?
Several problems
It can be several reasons
1.the usb is dead buy new
2. try factory resetting the device
3. install kies on pc it will install all the drivers that you need
4.your usb port(of the phone) is dead
I had the same problem pc was saying "USB cannot be recognized" I TRIED EVERYTHING from factory resetting, changing pc usb ports, changing usb, changing kernel, roms, trying on other pc, reinstalling kies and drivers but nothing. The problem was in the usb port on the phone where you connect the charger on the phone. That part is weak and so you have to change it. Take to customer service with your warranty and they will fix it without charging anything just tell them your problem and say that you read that most of the galaxy s2 users have this problem and that you didn't touch the hardware of the phone
Angelkom said:
It can be several reasons
1.the usb is dead buy new
2. try factory resetting the device
3. install kies on pc it will install all the drivers that you need
4.your usb port(of the phone) is dead
I had the same problem pc was saying "USB cannot be recognized" I TRIED EVERYTHING from factory resetting, changing pc usb ports, changing usb, changing kernel, roms, trying on other pc, reinstalling kies and drivers but nothing. The problem was in the usb port on the phone where you connect the charger on the phone. That part is weak and so you have to change it. Take to customer service with your warranty and they will fix it without charging anything just tell them your problem and say that you read that most of the galaxy s2 users have this problem and that you didn't touch the hardware of the phone
Click to expand...
Click to collapse
Warranty has already expired.
Kies was installed on the PC, ODIN gives no info @ COM port.
I wanted to connect it just to root and install CWM so I can swap ROMs as much as I want.
Thing is, the customer service wants 1 week to assess the issue and probably 100USD to fix it.
So for some god-knows-why reason my phone decided to conect to MTP while charging, I quickly restarted it into revocery mode and flashed CF_Root w/ CWM5.5.
Successful!
Bloody USB thingy!
Now I can start messing around with the phone.
Anyone has a n00blet guide on ROMs?
I was thinking about moving to CM 10.1, one of those nightlies running 4.2.2.
This is the one I used >> CF-Root-SGS2_XW_OXX_LPE-v5.5-CWM5
Can anyone suggest actions?
For future you should change your USB-Port. Here we get one for about 15 € (about 20 $) in ebay. It's very simple to change and then you have a full working phone again. Just watch the Videos on Youtube and everyone can do this. Hope I could help!
I know that many people have issue with connecting SGS2 to PC, and i also know that there are plenty of different solutions on internet, but i wouldn't be writing here if i haven't tried literally almost every possible solution out there. I spent 2 days trying to fix this, but still no result.
PC doesn't recognize that my phone is connected, and on the rare occasions when it does - it just shows me an error with drivers - "Windows can't recognize device" or something like that. Of course i tried numerous times reinstalling drivers, Kies, i tried to connect on 3 different PCs, i bought a new cable today - still nothing (but when other phone is connected with the same cable, its recognized immediately.)
I'm running a custom ROM - XWLSW NeatROM Lite v4.8 (JB 4.1.2), but I flashed this rom several months ago and i didn't have a problem with connection until last month. I also tried several other ROMs, but nothing helped.
I tried to dial *#7284#, then change USB to Modem and then back to PDA, didn't help - the same with *#9090# and setting it to Log via Uart. And of course, USB debugging is off. I'm really desperate, the phone is working fine in any other way, but this is a huge complication for me, so any help would be greatly appreciated.
Also sorry for my english, I'm Slovak.
Hmm, could be a problem with the USB port in the phone. I had the same symptoms and turns out the USB port was damaged so i got it replaced (i has warranty)
Also have you tried if ODin recognizes the phone? Go into Download mode and open Odin. If you see yellow (or blue) box with writing "com:" something than you're good. Otherwise it's the first alternative
I tried Odin, still nothing. Well, I hope it's not a problem with phone USB port - i have a warranty, but I bought it on Cyprus.
Is there any other solution?
I know this.It's a Sammy ROM bug.I had it too on stock 4.0.3.Since 4.2.2 I don't have it.
Well, yesterday I tried SentinelROM v4.75-CM10.1, which has 4.2.2 FW, and still the same problem
Hello everyone, I could not find a good title for my issue but I will try to explain as well as I can. I own a GT-I9300 (International), but since last official Samsung's firmware update(Jelly Bean 4.3) I am not able to get my phone recognized by my computer. Phone is connected and it charges, but neither Windows or Ubuntu recognizes it as a portable device. I am concerned about UMS is not available on device, but my phone it does not even get detected! I also own a Galaxy SII (4.1.2) and it does get detected by my PC. I think that flashing a custom ROM could solve the problem, since it appeared when I updated official firmware, but the thing is that I cannot root my phone! Tried ODIN but since my phone does not get detected, ODIN does not do its job. I also tried rooting with framaroot and towelroot, but no success: first one says "Failed , try another exploit" but there is only one. And the last one says my phone is not currently supported, even if I change modstrings.
So here is my question: how do I root my phone? I don't know what else I could try. I have already reinstalled Kies and Samsung USB drivers but still not working. Also hard-resetted but no luck.
Hope you guys can help me out because this is really getting on my nerves
Thanks in advance!
jalt96 said:
Hello everyone, I could not find a good title for my issue but I will try to explain as well as I can. I own a GT-I9300 (International), but since last official Samsung's firmware update(Jelly Bean 4.3) I am not able to get my phone recognized by my computer. Phone is connected and it charges, but neither Windows or Ubuntu recognizes it as a portable device. I am concerned about UMS is not available on device, but my phone it does not even get detected! I also own a Galaxy SII (4.1.2) and it does get detected by my PC. I think that flashing a custom ROM could solve the problem, since it appeared when I updated official firmware, but the thing is that I cannot root my phone! Tried ODIN but since my phone does not get detected, ODIN does not do its job. I also tried rooting with framaroot and towelroot, but no success: first one says "Failed , try another exploit" but there is only one. And the last one says my phone is not currently supported, even if I change modstrings.
So here is my question: how do I root my phone? I don't know what else I could try. I have already reinstalled Kies and Samsung USB drivers but still not working. Also hard-resetted but no luck.
Hope you guys can help me out because this is really getting on my nerves
Thanks in advance!
Click to expand...
Click to collapse
Try with other port and USB cable.
Have you Degugging Android activated in Deceloppers options ?
the other day i tried for hours to get my phone recognised. what did it in the end was trying it on a different pc and it worked
KeTuRr74 said:
Try with other port and USB cable.
Have you Degugging Android activated in Deceloppers options ?
Click to expand...
Click to collapse
I have already tried with every port on my PC. I'm using the USB cable that actually came with the device and it is working when I plug in another phones.
And yes, I have activated USB debugging
sosolid4u09 said:
the other day i tried for hours to get my phone recognised. what did it in the end was trying it on a different pc and it worked
Click to expand...
Click to collapse
The thing is that my phone is the only one that do not get detected every single time I connect it. I have already connected one GT-I9100 and GT-S6790L and both get detected. I already tried on 3 different Virtual Machines with Windows XP, Ubuntu, Windows 8.1 but no luck.
As I said in the first post, I think it's a firmware problem since it appeared when I did the official update, which was this one:
Model GT-I9300
Model name GALAXY S III
Country Argentina
Version Android 4.3
Build date Wed, 05 Nov 2014 20:33:08 +0000
PDA I9300UBUGNK1
CSC I9300UVOUGNK1
MODEM I9300UBUGNK1
jalt96 said:
Hello everyone, I could not find a good title for my issue but I will try to explain as well as I can. I own a GT-I9300 (International), but since last official Samsung's firmware update(Jelly Bean 4.3) I am not able to get my phone recognized by my computer. Phone is connected and it charges, but neither Windows or Ubuntu recognizes it as a portable device. I am concerned about UMS is not available on device, but my phone it does not even get detected! I also own a Galaxy SII (4.1.2) and it does get detected by my PC. I think that flashing a custom ROM could solve the problem, since it appeared when I updated official firmware, but the thing is that I cannot root my phone! Tried ODIN but since my phone does not get detected, ODIN does not do its job. I also tried rooting with framaroot and towelroot, but no success: first one says "Failed , try another exploit" but there is only one. And the last one says my phone is not currently supported, even if I change modstrings.
So here is my question: how do I root my phone? I don't know what else I could try. I have already reinstalled Kies and Samsung USB drivers but still not working. Also hard-resetted but no luck.
Hope you guys can help me out because this is really getting on my nerves
Thanks in advance!
Click to expand...
Click to collapse
I can see your frustration Now a few things technically it is a misconception that you need root to flash a custom rom you can actually flash a custom recovery with Odin full wipe and then flash a custom rom from custom recovery (only thing is you will lose all your data because you need root to back up your data)
Now I know the above statement is not very helpful because as you said Odin doesn't detect it (but I thought I would mention it anyway )
The reason framaroot and towelroot, didn't work is because at the moment the only way to root S3 is with Odin.:crying:
You may have tried this but I will mention it anyway first uninstal Kies and all Samsung drivers from your computer ( kies can interfere with Odin) Then try installing these drivers here >> http://developer.samsung.com/techni...Lhp1GqlWRy92Q60CX6PP1mF!80806326?v=T000000117 << If you have tried this then sorry.
Also when you connect the phone go to Device manager in Windows and try to look for your device ( it may say unkown device) it should have a warning triangle right click on it select update driver software and then select browse from my computer and point to the drivers that you have downloaded see if that works.
Another thing to note is if you are using Windows 8 you need to disable Driver signature in start up options ( Google it) for Windows to recognize the drivers.
tallman43 said:
I can see your frustration Now a few things technically it is a misconception that you need root to flash a custom rom you can actually flash a custom recovery with Odin full wipe and then flash a custom rom from custom recovery (only thing is you will lose all your data because you need root to back up your data)
Now I know the above statement is not very helpful because as you said Odin doesn't detect it (but I thought I would mention it anyway )
The reason framaroot and towelroot, didn't work is because at the moment the only way to root S3 is with Odin.:crying:
You may have tried this but I will mention it anyway first uninstal Kies and all Samsung drivers from your computer ( kies can interfere with Odin) If you have tried this then sorry.
Also when you connect the phone go to Device manager in Windows and try to look for your device ( it may say unkown device) it should have a warning triangle right click on it select update driver software and then select browse from my computer and point to the drivers that you have downloaded see if that works.
Another thing to note is if you are using Windows 8 you need to disable Driver signature in start up options ( Google it) for Windows to recognize the drivers.
Click to expand...
Click to collapse
I already tried uninstalling Kies and Samsung drivers. Also I tried looking for device on Device Manager but it does not appear when I plugin my S3, but it does appear when I connect other devices like S2 or Galaxy Fame Lite. They appear as portable devices.
I'm using Windows 7 on my PC and have already tried with different OS over Virtual Machines and still doesn't work.
And thanks for that note, didn't know there was possible to flash a Custom Recovery without root, but I can't since ODIN doesn't detect device :crying:
Then it looks like you are running out of options I would use another computer not Virtual Machines
Okay I'll give it a try but as I said before, looks like an firmware issue, not computer's. Why would my computer detects two another Samsung devices but not mine (which used to work until last update)
Me, too!
I'm having a similar problem. Last week my GS3 stopped working, and I bought another one from Ebay with a cracked screen and swapped out motherboards. The phone seems to work as well as a stock Verizon phone on Jellybean would, but I can't get my Linux, Win 8, or Win XP computers to even recognize that it's attached. Different cables, each and every one of the USB ports, not even a blip. Device Manager in Windows doesn't even see it, and yes I got the developer options unlocked and have enabled USB debugging.
I've got the Samsung drivers installed, and tried to install the CWM device drivers from the SAMSUNG GALAXY S3 TOOLKIT V9, but there was an error and that didn't work, either.
USB connection issues are usually due to Windows conflicts, driver problems or the lead itself. If all these have been excluded then you have either a firmware issue in the bootloader, which is very uncommon, or a hardware problem. The usb port is easily worn/damaged/dirty also the motherboard might be the cause.
There is no silver bullet to cure, test each possible thoroughly.
boomboomer said:
USB connection issues are usually due to Windows conflicts, driver problems or the lead itself. If all these have been excluded then you have either a firmware issue in the bootloader, which is very uncommon, or a hardware problem. The usb port is easily worn/damaged/dirty also the motherboard might be the cause.
There is no silver bullet to cure, test each possible thoroughly.
Click to expand...
Click to collapse
I'm 100 percent sure that it is not due a Windows issue, I have already test every option. I have not considered the usb port to be damaged or worn, which could be possible but phone charges every time I connect it to computer. It just does not get detected as a device. But in order to assume it is a motherboard issue I will have to put away my feeling that the problem is caused by last OTA official update, since this problem started there.
If it is a firmware update issue, is it any option to flash another ROM?
Sent from my GT-I9300 using XDA Free mobile app
try to install usb drivers on windows and factory reset the mobile before using odin but if u want to root there is al ot of program that dont need comp like root master and towel . search for them in google and if u want a rom i recommend cm rom resurrection
peter wagih said:
try to install usb drivers on windows and factory reset the mobile before using odin but if u want to root there is al ot of program that dont need comp like root master and towel . search for them in google and if u want a rom i recommend cm rom resurrection
Click to expand...
Click to collapse
Sorry but the only option that works to root the S3 international is Odin no apps work at the moment:crying:
tallman43 said:
Sorry but the only option that works to root the S3 international is Odin no apps work at the moment:crying:
Click to expand...
Click to collapse
no man how is it ?? believe me it works try frameroot.apk
peter wagih said:
no man how is it ?? believe me it works try frameroot.apk
Click to expand...
Click to collapse
Not on I9300 international version on other variants yes. Believe me if it worked it would be all over the forums post a link showing who it as worked for thanks..
peter wagih said:
try to install usb drivers on windows and factory reset the mobile before using odin but if u want to root there is al ot of program that dont need comp like root master and towel . search for them in google and if u want a rom i recommend cm rom resurrection
Click to expand...
Click to collapse
As I said on previous posts, I have already installed and reinstalled Samsung USB drivers and made a factory reset -one from config. option and another one from Android stock recovery 3e (since I cannot install any advanced recovery -or even root it- to flash a custom rom). Doing those factory reset did not downgrade my last firmware update (when all my problems started).
I also said on previous posts that I tried towelroot and framaroot with no success. As tallman43 says, seems like international version of S3 does not support those kind of one-click to root apps.
-----------------------------------------------------
So far the only options available (if my theory about latest firmware update is the problematic one) are:
● downgrade firmware: [Q] How? Odin is not working since my phone does not get detected;
● root my phone in order to install an advanced recovery and flash a new ROM: [Q] Any way of rooting phone without computer (apart from towelroot or framaroot because I have tried and do not work for me)? I read one XDA post from 2 years ago to root S3 via console apk but latest comments assumes that method stopped working.
● install an advanced recovery without odin or root: [Q] How?
● fix USB firmware issue: [Q] I have completely no idea how to do it. (Already played with *#7284# and *#0808# but did not get my phone detected)
Please I need help, this is really irritating me and I am running out of ideas
Sent from my GT-I9300 using XDA Free mobile app
I guess I have found out what the problem was. It was not firmware (as I thought). It was the micro USB port (as boomboomer said) which seems to not be firmly attached to the PCB. AC charging just seems to work okay, but not USB connections. I managed to figure it out by forcing the USB in a specific position to get it detected for 5 seconds, but then it disappeared.
Yeah, it was not as complex as I thought! I will try to replace that micro USB port as soon as possible, thanks everyone for your help!