Hi. I'm on Plk-L01 with B180 not unlock/rooted
How can update to mm?
I read many different opinions and files to use.
Thanks
Inviato dal mio PLK-L01 utilizzando Tapatalk
Over the air update is currently the only way if I have understood correctly. Download version comes next week.
laba82 said:
Over the air update is currently the only way if I have understood correctly..
Click to expand...
Click to collapse
that’s wrong! B180 is able to have a local update! So you can use the B170/180->B320 Update file!
You will find it here on Page 4 ->http://consumer.huawei.com/fi/support/downloads/index.htm
BUT YOU CAN NOT RETURN TO B180 if something is wrong without unlocking the bootblock!
Edit: Wrong type corrected!
non-toxic said:
that’s wrong! B180 is able to have a local update! So you can use the B170/180->B330 Update file!
You will find it here on Page 4 ->http://consumer.huawei.com/fi/support/downloads/index.htm
BUT YOU CAN NOT RETURN TO B180 if something is wrong without unlocking the bootblock!
Click to expand...
Click to collapse
Honor 7 Firmware(PLK-L01, C432B320, Europe, Android6.0, EMUI4.0, Preview Version, Not Final Release)
No B330, or final version.
ok, my fault! It is an update up to B320. After than you have to wait of the B320->B330 OTA Update.
be patient
I did this Update from b180. All data was erased. First Update went wrong and failed at around 50%
I booted with mom successfully. No data was erased. For security I flashed it again and that time it goes to 100% with full factory reset.
But I miss the networkspeed indicator in status bar which was very useful in b180...
Gesendet von meinem PLK-L01 mit Tapatalk
merlin21 said:
I did this Update from b180. All data was erased. First Update went wrong and failed at around 50%
I booted with mom successfully. No data was erased. For security I flashed it again and that time it goes to 100% with full factory reset.
But I miss the networkspeed indicator in status bar which was very useful in b180...
Gesendet von meinem PLK-L01 mit Tapatalk
Click to expand...
Click to collapse
I don't undestand
Inviato dal mio PLK-L01 utilizzando Tapatalk
You have the link to the file in the third post. Just download the file and there is instruction there.
But this is not official marshmallow, there isn't one at the moment. It will be released to download in the end of next week. Our you will get it OTA in couple days/weeks
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
krisu253 said:
You have the link to the file in the third post. Just download the file and there is instruction there.
But this is not official marshmallow, there isn't one at the moment. It will be released to download in the end of next week. Our you will get it OTA in couple days/weeks
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
Click to expand...
Click to collapse
Third post is 320
Inviato dal mio PLK-L01 utilizzando Tapatalk
Related
I've found a few errors on Marshmallow for PLK-L01, which I installed manually, and, like happened to many people, It gave me an error while updating, but then it booted with the new version as nothing happened.
My question is: what if these errors I've found are due to the manual installation? And then, would it be possible to rollback from B330b to B180 in order to get the OTA? (assuming that the errors are caused by what I mentioned)
You should have been updated once more after you got the error message.
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
krisu253 said:
You should have been updated once more after you got the error message.
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
Click to expand...
Click to collapse
I simply followed the instructions given by Honor in their PDF, it didn't say nothing about updating twice.
Yup I know there is nothing about that, but it was discused before at this forum. You should just copy the update.app file again to the dload folder, then write in the dialpad *#*#2846579#*#* and check the software update.
Also if the first update didn't erase all your data there is a big possibility that this time it will.
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
krisu253 said:
Yup I know there is nothing about that, but it was discused before at this forum. You should just copy the update.app file again to the dload folder, then write in the dialpad *#*#2846579#*#* and check the software update.
Also if the first update didn't erase all your data there is a big possibility that this time it will.
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
Click to expand...
Click to collapse
Should I update now again? It did erase my data. I've been able to use my phone, the errors were notifications, esentially. Fixed by using Google Now Launcher
You should update and this time it should go up to the 100%. If the bugs will still be present then you can try to downgrade to the B121 and wait for the OTA. But I'm on the B330 and don't have any problems with notifications
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
krisu253 said:
You should update and this time it should go up to the 100%. If the bugs will still be present then you can try to downgrade to the B121 and wait for the OTA. But I'm on the B330 and don't have any problems with notifications
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
Click to expand...
Click to collapse
Thanks a lot. Do you see the lock button on the tools folder, like the one in Lollipop?
Nope, it is gone but it is available on the custom launchers as Nova e.g. This is wierd but it is like that since the B320. Don't really know why
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
krisu253 said:
Nope, it is gone but it is available on the custom launchers as Nova e.g. This is wierd but it is like that since the B320. Don't really know why
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
Click to expand...
Click to collapse
And then, just to make sure and end this, can I update from the same version i want to update, can't I?
Yep
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
Hello everyone
who tried this firmware?
I'm going to try it tonight when I come home from work I'll be back in the day tomorrow
:good:
gismoboss13 said:
Hello everyone
who tried this firmware?
I'm going to try it tonight when I come home from work I'll be back in the day tomorrow
:good:
Click to expand...
Click to collapse
A few days ago I installed BLA-L29 8.0.0.127(C432) from funkyhuawey. I cannot remember if the particle 'a' was in the name of release. Later it did not appear on FH listing and today i see it as you mention. I don't know if mine was an early release and if it had any bugs...but I am using it with no noticeable problems!
Later I will try to flash BLA-L29 8.0.0.127a(C432) on Hisuiteand see if it is identified as a new version
Ok thanks for your come back ! I try after this FW
I installed it today. Working great.
Phone originally on purchase: BLA-L09 8.0.0.115 (C432)
Now showing: BLA-L09 8.0.0.127 (C432)
So it doesn't effect the BLA number.
Hello,
Where can we download it?
I used Funky Huawei.
Arthur Hucksake said:
I used Funky Huawei.
Click to expand...
Click to collapse
Mirror?
Enviado desde mi ONEPLUS A5000 mediante Tapatalk
https://funkyhuawei.club
sounds like a (for alpha)
virtyx said:
sounds like a (for alpha)
Click to expand...
Click to collapse
a isn't for alpha. They released 127 then fixed a bug and called it 127a internally. On the About Phone screen it might be called 127 without the a.
duraaraa said:
a isn't for alpha. They released 127 then fixed a bug and called it 127a internally. On the About Phone screen it might be called 127 without the a.
Click to expand...
Click to collapse
That's it, i had flashes previous 127 version (but no bug noticed) and now I have flashed new 127a, and on about phone sections there is no mention to 'a'
If the new firmware is approved for instalation (I found it on Huawei Firmware Finder), does it mean then that we will soon receive OTA? Sorry for the question but after 8 years with Samsung flagship phones I don't know how it looks like with Huawei[emoji6]
Wysłane z mojego BLA-L29 przy użyciu Tapatalka
kuleczka1983 said:
If the new firmware is approved for instalation (I found it on Huawei Firmware Finder), does it mean then that we will soon receive OTA?
Click to expand...
Click to collapse
I also see that installation for my IMEI is approved but there is a problem when i try to download by proxy.
edit
Managed to update through FF and proxy by using mobile data to download the update. So far so good.
@up I've watched a few tutorials on YouTube how to do it, but I'm still a little bit afraid. I prefer to install this firmware via official OTA, but I don't know how long it will take until Huawei will release it...
Wysłane z mojego BLA-L29 przy użyciu Tapatalka
i have mate 10 pro BLA-L09 8.0.0.115(C432)
and i don't see any update???
Regionella said:
i have mate 10 pro BLA-L09 8.0.0.115(C432)
and i don't see any update???
Click to expand...
Click to collapse
Use the Firmware Finder app to update! You should choose BLA-L09 8.0.0.127a (C432) FullOTA firmware and use the In-App Proxy to update (you can find the instructions in the app)
Pretoriano80 said:
Use the Firmware Finder app to update! You should choose BLA-L09 8.0.0.127a (C432) FullOTA firmware and use the In-App Proxy to update (you can find the instructions in the app)
Click to expand...
Click to collapse
Hi, I have Pro version and if I will flash FullOTA firmware via Firmware Finder I won't lose (wipe) my data?
Grigorijs said:
Hi, I have Pro version and if I will flash FullOTA firmware via Firmware Finder I won't lose (wipe) my data?
Click to expand...
Click to collapse
you won t lose your data!
Ok. I am after instalation via Firmware Finder. Everything works fine and I don't see any issues with the system. So you can easily upload that firmware straight into your phones.[emoji6]
I also don't have any issues with YouTube and Messenger now.
Wysłane z mojego BLA-L29 przy użyciu Tapatalka
İnstalled the 127 (c432) without any problem. Changed the dns and voila, firmware update appeared.
Sent from my [device_name] using XDA-Developers Legacy app
Update 9/7/18 - Now possible to have full Xperia X official version support on XC, including Android apps and OTA update. See post by g7 in this thread in Jolla forum - https://together.jolla.com/question/185922/sailfish-os-on-sony-xperia-x-compact/
Requires official Sailfish X system image,, which can only legally be obtained from Jolla by buying a licence for 50 Euros. Once you have the image, download and unzip g7's patcher, and copy image to same folder and run the patcher.. Then fastboot the rom using the same instructions as for the community port below.
--------------------------------------
Here is the info for community port, (v. 2.1.3.7, no license required, no official Android support, no ota):
Check it out - https://together.jolla.com/question/180109/announcement-community-sony-xperia-x-compact-release/
Not my work, I just found it. I downloaded, but won't be able to test until tomorrow. It's not a flashable, instructions to flash via fastboot are included in the zip.
If anyone beats me to it, post here and let us know...
Flashed successfully and working well. Auto flash didn't work for me on Win10. I had to make a modification to bat script, and didn't work anyway, so had to flash fastboot commands manually.
Working: cellular, wifi, mobile data, gps, bluetooth, sensors... Call volume is good.
- Download zip from link above and extract
- Download oem image from Sony site linked in README file in zip, and extract to sailfish folder
- Open cmd, and cd to sailfish directory to flash
Code:
fastboot flash boot hybris-boot.img
fastboot flash system fimage.img001
fastboot flash userdata sailfish.img001
fastboot flash oem (name of Sony oem file).img
Done
So far my experience:
Very impressive. Much better than the Firefox OS and Ubuntu touch ports, etc, that I've tried on Xperias in the past. Main issues for me are,
- camera not so good in low light, (good in good light)
- limited system app options, (alternative browsers, keyboards, etc.). There is functiining Jolla app store, with some good apps, as well as dev-type repos, like warehouse, and openrepo, with patches, etc, but I find the system apps kind of laggy/buggy. Hopefully more development coming
- app switching/multitasking cumbrersome. In general, don't expect anything like android. It's all gestures and no buttons. Probably actually better than I realize, but takes getting used to.
pros,
- Really nice ui, and lots of customization options. I've just started figuring out a little bit.
- boot time is less than 10 seconds, (about 2 or 3 seconds after Sony logo).
- good experience so far with support forums
- potentially capable of using android apps. Sailfish has a service called aliendalvik that can run Android apps. I can't tell yet if it works on this phone, though. It seems like it doesn't, out of the box, but maybe could... (update 5/24 - see here for working Android files: https://forum.xda-developers.com/showpost.php?p=76612066&postcount=71).
Can't get it to flash. Script is written to look for 228 fw, (N), so flashing with O causes 'wrong version' error. I downgraded to 228 to test, but script just starts, and then closes without doing anything. I also tried changing batch script to look for different version, but didn't help. I wonder if it's a Win10 issue..
success. needed to edit batch script and flash commands automatically.
Going to update op with instructions
Sensproof said:
Wow! Thanks for sharing! Will try flashing it tonight
UPD: Flashed successfully. Works great! Even Android Support(tm) works (after installing RPMs from Sailfish X)
Bugs so far:
- Sometimes the screen won't react to touches after unlocking. Solved after locking the device again and then unlocking it
Click to expand...
Click to collapse
I've noticed screen responsiveness a little dull in general, but liking it overall...
Sensproof said:
After using it for one day in seems the lockscreen bug was caused by double tap to wake option, which i had enabled earlier from the command line. The bug is gone after disabling the function.
One more thing to consider if you want to install Sailfish is camera quality: there are problems with focusing in low light (seems to be a problem on Xperia X as well: https://together.jolla.com/question...focus-or-picture-sharpness-seems-non-optimal/). It will probably be fixed in the next build though
Click to expand...
Click to collapse
Noticed the same after 2 days. Too bad really, because in good light, the camera is very good.
Going to add review in op...
stupid question: I need the boot loader unlocked?
Sensproof said:
Wow! Thanks for sharing! Will try flashing it tonight
UPD: Flashed successfully. Works great! Even Android Support(tm) works (after installing RPMs from Sailfish X)
Bugs so far:
- Sometimes the screen won't react to touches after unlocking. Solved after locking the device again and then unlocking it
Click to expand...
Click to collapse
allready installed SailfishOS on my xcompact, I love it, A question sir, where do you get that RPM for the android support(tm) ???
THANKS!!
ramirowski said:
allready installed SailfishOS on my xcompact, I love it, A question sir, where do you get that RPM for the android support(tm) ???
THANKS!!
Click to expand...
Click to collapse
as posted in op, not sure if available for this phone. Seems like there is official support from Jolla for Xperia X, (search for SailfishX), but it's a paid service, and only officially available in certain countries. For unofficial support, you just have to search...
For me not work i have flash 7.1 firmaware unluck bootloader after i have downloaded oem 7.1.1 v13 after flash all guide logo sony and bootloop.. Any help? thx
Inviato dal mio D6603 utilizzando Tapatalk
Franco_Sposato said:
For me not work i have flash 7.1 firmaware unluck bootloader after i have downloaded oem 7.1.1 v13 after flash all guide logo sony and bootloop.. Any help? thx
Inviato dal mio D6603 utilizzando Tapatalk
Click to expand...
Click to collapse
Did all fastboit commands return successful, (ok)? If ao, try a different vendor img. There are several to choose from. I flashed from O, but the oem file was for N. Also, try using script first. Flash manually only if you have to.
levone1 said:
Did all fastboit commands return successful, (ok)? If ao, try a different vendor img. There are several to choose from. I flashed from O, but the oem file was for N. Also, try using script first. Flash manually only if you have to.
Click to expand...
Click to collapse
I have flash oem...mm...n...oreo...bootloop yes after run all image is all ok..but don t boot.
Scrips bat don t work windows 7
Inviato dal mio D6603 utilizzando Tapatalk
Franco_Sposato said:
I have flash oem...mm...n...oreo...bootloop yes after run all image is all ok..but don t boot.
Scrips bat don t work windows 7
Inviato dal mio D6603 utilizzando Tapatalk
Click to expand...
Click to collapse
Sorry, not sure. .. Maybe try starting from O. I've been using it for a week now, and really like it. Don't even want to go back yet. ..
levone1 said:
Sorry, not sure. .. Maybe try starting from O. I've been using it for a week now, and really like it. Don't even want to go back yet. ..
Click to expand...
Click to collapse
Whitc oem you are using? Loire 4.4 kernel or 3.4?
Inviato dal mio D6603 utilizzando Tapatalk
---------- Post added at 03:51 PM ---------- Previous post was at 03:48 PM ----------
levone1 said:
Sorry, not sure. .. Maybe try starting from O. I've been using it for a week now, and really like it. Don't even want to go back yet. ..
Click to expand...
Click to collapse
I tried from oreo but nadaaaa
Inviato dal mio D6603 utilizzando Tapatalk
Franco_Sposato said:
Whitc oem you are using? Loire 4.4 kernel or 3.4?
Inviato dal mio D6603 utilizzando Tapatalk
Click to expand...
Click to collapse
I used "SW_binaries_for_Xperia_AOSP_N_MR1_3.10_v13_loire", coming from clean flash 8.0, (not the latest version, but the previous update, [Feb. patch]).
thanks for your help I gave up I'm not lucky I would have liked to try it
Inviato dal mio D6603 utilizzando Tapatalk
levone1 said:
I used "SW_binaries_for_Xperia_AOSP_N_MR1_3.10_v13_loire", coming from clean flash 8.0, (not the latest version, but the previous update, [Feb. patch]).
Click to expand...
Click to collapse
One question you are downloaded all file or only zip file? I have only zip file
Inviato dal mio F5321 utilizzando Tapatalk
Franco_Sposato said:
One question you are downloaded all file or only zip file? I have only zip file
Inviato dal mio F5321 utilizzando Tapatalk
Click to expand...
Click to collapse
the download is a zip file with an img file inside. You need to extract the img to flash it.
levone1 said:
the download is a zip file with an img file inside. You need to extract the img to flash it.
Click to expand...
Click to collapse
Yes i have only zip file estract in the folder on desktop
Inviato dal mio F5321 utilizzando Tapatalk
Franco_Sposato said:
Yes i have only zip file estract in the folder on desktop
Inviato dal mio F5321 utilizzando Tapatalk
Click to expand...
Click to collapse
extract the img file in the zip into the same durectory with Sailfish files, then fastboot flash each one according to instructions in op, (4files).
levone1 said:
extract the img file in the zip into the same durectory with Sailfish files, then fastboot flash each one according to instructions in op, (4files).
Click to expand...
Click to collapse
Yes i have flash all ok but bootloop i m not Lucky hahahha
Inviato dal mio F5321 utilizzando Tapatalk
Out of the blue I got 163(432) through regular update. I guess just July security patches.
July security patches and EIS for 1080p 30 fps is all.
iamsabresh said:
July security patches and EIS for 1080p 30 fps is all.
Click to expand...
Click to collapse
That came with 162 for me
wmfreak said:
That came with 162 for me
Click to expand...
Click to collapse
162 was June patches and EIS. Many didn't receive the 162 update and got the 163 update directly with July patches and EIS
iamsabresh said:
162 was June patches and EIS. Many didn't receive the 162 update and got the 163 update directly with July patches and EIS
Click to expand...
Click to collapse
I see
And here I am still waiting for it still on 160 May patch.
Danfenn said:
And here I am still waiting for it still on 160 May patch.
Click to expand...
Click to collapse
I was on May patch too man. Got the July one directly just last week
I upgraded from 160 to 163 today too. But I had to tap menu in System update app and choose to download complete package, otherwise it didn't offer me any updates.
jenda.69 said:
I upgraded from 160 to 163 today too. But I had to tap menu in System update app and choose to download complete package, otherwise it didn't offer me any updates.
Click to expand...
Click to collapse
To anyone who hasn't received the update, try this... May work
iamsabresh said:
To anyone who hasn't received the update, try this... May work
Click to expand...
Click to collapse
Is that method erasing user data?
Wysłane z mojego BKL-L09 przy użyciu Tapatalka
jenda.69 said:
I upgraded from 160 to 163 today too. But I had to tap menu in System update app and choose to download complete package, otherwise it didn't offer me any updates.
Click to expand...
Click to collapse
hope that didn't erase your data
PowerHero said:
hope that didn't erase your data
Click to expand...
Click to collapse
I just made it and it doesn't erase user data
Wysłane z mojego BKL-L09 przy użyciu Tapatalka
marek_poland said:
I just made it and it doesn't erase user data
Wysłane z mojego BKL-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
thank you
marek_poland said:
Is that method erasing user data?
Wysłane z mojego BKL-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
No, it won't erase data if you update via the system updater, unless you flash the full firmware manually
hey guys I am wondering if anyone of you got the security update for august in europe or in USA.
thanks in advance.
Not yet here in europe
Nope, nothing yet.
Just got the update. Downloading.
????
Mine says February...
I was able to get the update by using a vpn set to germany
Nothing here in Global variant
Edit: Update is available now.
September security patch is rolling for Global variant now.
Incat said:
I'm still on 12 0 1 with June security patch.
How do I get the update.?
Click to expand...
Click to collapse
EEA? Change region for india, install update and then revert this change ;P
Wysłane z mojego Mi 10 przy użyciu Tapatalka
I just got some control center update, but no October security patches yet.
Incat said:
What's eea.?
I already tried changing the region to India.
I'm not even sure if its due an update, but June security patch seems a bit old.
Presumably something with come over air eventually?
Click to expand...
Click to collapse
EEA is the European version of the software.
Wysłane z mojego Mi 10 przy użyciu Tapatalka