Hey guys
So this happened ,
Installed Mokee open source ROM ROM which is 4.4.4
Now i wanted to go back to Viper Rom which is on 4.2.x
So i went to boot flashed boot , flashed recovery , tried to install rom and well it did not install the rom kept saying fail
Anyways i had a OLD viper 1.1.x so i installed that so i can just get things started but now it doesnt show any files like SD card doesnt exist on the phone or on the laptop
I need some serious help , im freaking out.
Thank's alot
You need an older recovery
Sent from my Nexus 5 using Tapatalk
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
AbhinavIsgrt said:
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
Click to expand...
Click to collapse
You will get performance close to deodexed KitKat stock rom .. No problems so far .. surely upgrade your device to cm13 :good:
definitely no problems.. just great.
latest nightly works flawlessly..
there is plethora of feature in marshmallow and in being cyanogenmod
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
ulises.rodriguez said:
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
Click to expand...
Click to collapse
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
ABSathe said:
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
Click to expand...
Click to collapse
ABSathe, 1000 Thanks for the quick reply, for letting me know that I can directly clean flash cm13 over 5.1 and for the link to official nightlies !
Please confirm if this is the correct method to flash the CM13 ROM:
1) Boot into latest TWRP and Format Data: Wipe > Format DATA > Yes
2) Transfer ROM to SDCARD or Internal Storage: CM13 ROM + gapps 6.0
3) TWRP > Wipe > Factory reset and flash CM13 ROM, and then Flash gapps 6.0 (flash cm13 and gapps in a single session)
4) Reboot.
However, since I have already installed in my Moto-T, the version 2.8.7 of TWRP ( http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3100879 ), I would like to know if is better and also you recommended me to install first ( using fastboot flash recovery) the cm-13.0-20160810-NIGHTLY-condor-recovery.img (instead of TWRP 2.8.7) ? :
CyanogenMod Recovery:
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor-recovery.img
And then the:
CyanogenMod Build
cm-13.0-20160810-NIGHTLY-condor.zip (322.76 MB)
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor.zip
And Finally - Flash gapps 6.0:
http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
https://www.androidfilehost.com/?fid=24533103863139560
One last question, since I know that the CM13 is not based in an official Motorola release, I would like to know what is working flawlessly, and what is not working with in the Moto-E if I use this CM13 ROM ?
Please excuse all the questions, but I will like to be fully sure of the method and the correct files, that I have to use to successfully flash my Moto-E to CM13, to avoid future problems.
Thanks again for all your help !!
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
ABSathe said:
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
Click to expand...
Click to collapse
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
ulises.rodriguez said:
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
Click to expand...
Click to collapse
All the sensors are working perfectly
And regarding gapps .. I have installed older package (which I downloaded in July) .. but the latest one will just work fine
And latest nightly of cm13 is working perfectly for me.. so go for it
Sent from my Nexus 5X using XDA Labs
Hey everyone!
I just rooted my phone. Now I want to install a custom rom. I'm on stable miui rom 8.2.10 which is built on android marshmallow.
My question is, can I install a custom rom now, for example LineageOS 14 which is based on android nougat?
Thanks in advance
Greetings Benjamin
xbenjamin87x said:
Hey everyone!
I just rooted my phone. Now I want to install a custom rom. I'm on stable miui rom 8.2.10 which is built on android marshmallow.
My question is, can I install a custom rom now, for example LineageOS 14 which is based on android nougat?
Thanks in advance
Greetings Benjamin
Click to expand...
Click to collapse
Yes u can. Install TWRP recovery first then the firmware (since u r on marshmallow u need nougat firmware), then which ever rom u prefer.
xbenjamin87x said:
Hey everyone!
I just rooted my phone. Now I want to install a custom rom. I'm on stable miui rom 8.2.10 which is built on android marshmallow.
My question is, can I install a custom rom now, for example LineageOS 14 which is based on android nougat?
Thanks in advance
Greetings Benjamin
Click to expand...
Click to collapse
For installation of custom rom you need the following
device
unlocked bootloader
custom recovery like twrp
rom package , gapps , other stuff like root addon , volume mod , sound mod etc
working brain :silly:
patience:silly:
Now let me answer you . Download your desired rom package for your device . And simply flash the rom and other stuff through twrp . The rom installation process may vary a little bit but the standard process is to BOOT TO TWRP
WIPE SYSTEM ,CACHE/ DALVIK, DATA
FLASH THE DESIRED ROM + GAPPS(OPTIONAL) + OTHER STUFF ( OPTIONAL )
and now finally reboot to system . Voila you are good to go . Hope you got what you asked . Thank you
Edit : didn't saw the above Post
Yes you need to flash firmware before rom
Thank you guys!
Gesendet von meinem Redmi Note 4 mit Tapatalk
Guys i was on pure nexus rom
here the link
https://forum.xda-developers.com/redmi-note-3/development/rom-pure-nexus-substratum-fi-wifi-t3577060
its Development is closed now.
but i m stuck now
i wanna go back to stock miui roms by mi team.
i m flashing the rom but at the end my recovery say "No OS installed".
please help me .
i m thinking i m on wrong firmware.
using TWRP recovery.
Have you tried flashing an official fastboot rom in EDL Mode?
Alternative try Flashing with the XiaoMiTool
Latest Firmware can be got here.
Why you want to go back to MIUI, Instead of another custom rom is the big question?
lakshay_monga said:
Guys i was on pure nexus rom
here the link
https://forum.xda-developers.com/redmi-note-3/development/rom-pure-nexus-substratum-fi-wifi-t3577060
its Development is closed now.
but i m stuck now
i wanna go back to stock miui roms by mi team.
i m flashing the rom but at the end my recovery say "No OS installed".
please help me .
i m thinking i m on wrong firmware.
using TWRP recovery.
Click to expand...
Click to collapse
You need to flasb through mi tool... Fastboot flash or in edl mode
Or if you don't want to get rid of TWRP and everything, you could try flashing a custom MIUI rom, i.e Xiaomi.eu, which is pretty much stock MIUI, with better ram management and other features.
My phone just went bootloop by itself and it doesnt properly boot by itself . It was running on Android 7.0 . So l ve previously backed up the stock rom using twrp but when restored ..... again it goes into bootloop. I ve basically flashed all of the existing custom roms like lineage , resurrection remix,cardinal OS, pixel experience . And i even tried downloading the stock rom and flashing it. No use. Basically I cant flash no roms now . Btw i am running on latest versiom of twrp for my device 3-2-3-0 . I tried the earlier versions also . No use. Somebody suggest a solution to this issue.