Wiped my OS on ZTE Nubia Z7 Max! - ZTE Z7, Z7 Max, Z7 Mini

First of all, yes I am retarded and yes, I am aware of it.^^
So, as you can read in the Topic, I Wiped my whole OS with TWRP, now my Phone won´t go any further than on the Nubia Bootlogo that´s it. When I plug the Phone into the PC, it won´t be recognized, so how am I supposed to get a OS back on it?
Thanks in advance!

Don't worry, just download and install as described this: ROM 3.22.
It's working from comp, and contain whole system, so it will bring your phone back

Related

[HELP] One Plus X without OS

Hello guys, I really hope you could help me on this one, I screwed up really really bad.
Let me explain the problem, I wanted to be a smart ass, and install an unofficial version of Nougat, and I succeeded, but then I wanted to remove it because I wasn't satisfied of it.
So I went on recovery mode and "accidentally" erased everything... I said that I screwed up ok, at leat I'm aware of it haha
So now my problem is that my phone is completely empty, cant get into recovery mode, only in fastboot mode, adb and fastboot don't recognize my phone, and that's logical because there is nothing in it.
So, is my phone completely dead, or is there a way to put the original os in it?
Thank you guys so much for helping me, i'm desperate...
PS/ I know this is probably the wrong category for this topic, but since it's my firt post, I hope you could understand, appreciate
did you install all the needed oneplus drivers to your computer in order to recognize it? If that's your problem, then you could flash twrp onto your phone and get stock OOS back.
Gwennito said:
Hello guys, I really hope you could help me on this one, I screwed up really really bad.
Let me explain the problem, I wanted to be a smart ass, and install an unofficial version of Nougat, and I succeeded, but then I wanted to remove it because I wasn't satisfied of it.
So I went on recovery mode and "accidentally" erased everything... I said that I screwed up ok, at leat I'm aware of it haha
So now my problem is that my phone is completely empty, cant get into recovery mode, only in fastboot mode, adb and fastboot don't recognize my phone, and that's logical because there is nothing in it.
So, is my phone completely dead, or is there a way to put the original os in it?
Thank you guys so much for helping me, i'm desperate...
PS/ I know this is probably the wrong category for this topic, but since it's my firt post, I hope you could understand, appreciate
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/one...ga-unbrick-guide-hard-bricked-t3272108/page19
shravanv3 said:
Try this
http://forum.xda-developers.com/one...ga-unbrick-guide-hard-bricked-t3272108/page19
Click to expand...
Click to collapse
The thing is, my phone is detected by my PC, as Kedacom USB Device > Android Bootloader Interface.
I tried to follow the guide from page 1, but since my phone is not detected as Qualcomm whatever, I don't if I can follow this procedure.
And also, when I turned on my phone, I juste have the logo One plus and Power by Android. If i try a recovery mode reboot, it's same screen, over and over. The only thing I can get into, is the FastBoot mode, by holding Volume up + Power, but I don't know if I can do anything with it, because even in this mode, adb won't recognize it.

After Root and LinageOS 15 installation, stuck in eRecovers

Hi all, I am stuck.
I got my Mate 10 Pro (BLA-L29) and wanted to install LinageOS 15. I followed the guide here, rooting and everything went fine. I installed LinageOS 15, the most current build then, via fastboot flash system systemXXX.img. The process went well, the phone rebooted. But since then its stuck in eRecovery Mode. It offered me the "factory wipe" option on the first time, since then I get the options of Rescue (which times out or can't find the files), Shutdown and reboot. It also shows a "this device is not to be trusted" splashscreen during boot, including a link that leads to a 404 on the EMUI-OS-Site. Sorry if that has been asked already i did not find much regarding eRecovery.
I managed to install TWRP, but strangely it still boots into eRecovery. I can force it to boot into TWRP, but it simply will not switch away from eRecovery.
So, what are my options?
1) wait and see, try new versions of LinageOS.
2) use the firmware finder to get the original firmware (any pointers about which one? I'd go for the earliest 8.0 for the BLA-L29?) But how can I get it to the phone since its not an image and the phone does not have a SD-Card? Can I mount it via USB?
3) Get rid of eRecovery or force a switch to TWRP - is that doable?
Any help would be greatly appreciated. I did a lot of custom firmware back when I had the first Desire, but since then I used Blackberry or other, non-rooted devices. I want my control over my OS back.
Thank you in advance, let me know if you need any more information.
Ok, if anyone else needs help:
This helped me, I got back to the Mate 10 Pro Stock ROM
https://forum.xda-developers.com/mate-10/how-to/root-updates-rebranding-unbricking-t3701970
Important: after flashing, you need to remove the USB-cable, otherwise it will just boot into recovery

Save Files in Soft Brick and make it Boot again

I wanted to sign in to Snapchat but apparently, that doesn't work if you have root.
I then uninstalled the Xposed Framework and ignored it saying I should wipe dalvik cache (I now know that's stupid but I don't have a recovery or some option to do that rn)
Next, I went to SuperSu and did the full unroot.
After that I was told to reboot and now I'm stuck at the picture you always see before the bootanimation starts.
I'm looking for something like Titanium Back to get really everything saved and from there on make my phone boot again, stock rom is good enough.
I have access to a Windows PC which doesn't recognize my phone via USB, a big enough SD Card.
However, I don't have a custom recovery installed and when I try going to the stock recovery, it just says "No Command".
If I boot into fastboot, the phone acts as if everything was the way it should be while my PC still doesn't recognize it
Also, I can't remove the battery on this phone but making it go empty doesn't help either.
We´re talkting about my Umidigi Crystal 2/16 Version <-- The 2/16 is a different version!!
And it was running stock rom which was Android Nougat.
I´m not that experienced whith these things, you might have guessed it.
Thank you for any help though.

Question Stuck on red dot/TWRP screen

Hi,
I tried rooting my Nord 2, but managed to screw it up somewhere. I followed the usual stepw to do this, but the first time I was unable to use my wifi/bluetooth/gps. My phone was/is at the A1 EU. Version. I tried fixing the problem, but made things worse. Now I am stuck in the red dot boot logo and after a while I get to the TWRP screen. From there I can still fastboot. I tried restoring my phone from there, but without any luck. Can someone help me fix my phone ? At this point I don't even care that much anymore about rooting my phone, i just want to be able to use it again.
Thanks in advance!
Hi,
I had the same issue, but without switch to TWRP screen, just stays on red dot boot logo and that was all. The solution for me was format of the storage with stock recovery. In your case you may follow the instructions below:
1. Boot in bootloader (volume down + power on)​​2. Flash the stock recovery​​3. Reboot to recovery​​4. Select English, after that Wipe and Format storage (the phone will reboot automatically after success)​
Best regards and good luck!
Onacceptable said:
Hi,
I tried rooting my Nord 2, but managed to screw it up somewhere. I followed the usual stepw to do this, but the first time I was unable to use my wifi/bluetooth/gps. My phone was/is at the A1 EU. Version. I tried fixing the problem, but made things worse. Now I am stuck in the red dot boot logo and after a while I get to the TWRP screen. From there I can still fastboot. I tried restoring my phone from there, but without any luck. Can someone help me fix my phone ? At this point I don't even care that much anymore about rooting my phone, i just want to be able to use it again.
Thanks in advance!
Click to expand...
Click to collapse
Did you try to format data via twrp and then restart?

Question Is my device bricked?

Hi,
I tried to follow the instructions to convert my device from Chinese rom to global.
I was struggling a bit, but eventually managed to get all the steps done without an error.
However, my device does not get booted to the OS at all.
I noticed everyone mention a boot loop but mine just switched off (so it seems).
So my first question is did I brick my device?
I can still boot recovery / bootloader., my boorloader is also unlocked.
What can i do to fix it?
Is it possible to go back to the Chinese rom?
Do I need to contact the mystery guy from instegram?
Thanks,
Bar1
If you still have Fastboot/recovery you are fine

Categories

Resources