Huawei p8 problem - Android Q&A, Help & Troubleshooting

Hi guys, I know it's not the right section, but I can't open a thread on P8's one. I have a big problem with my phone. I bought it when it was in a bootloop; this guy tried to install Marshmallow and he failed it. I managed to roll back to b110 version and now I'm stucked. I can't install a higher version, the phone works (not fine; i can't receive calls, watch videos etc etc) but it works. i have the original IMEI; When I'm trying to install a higher version from local I get an error massage like: software install failed! get help from....and than it reboots back. I unlocked the bootloader too. What can i do? Sorry for my bad english, I hope to find some support from you guys.

Same problem here weitn for solution also..
Sent from my SM-E500H using XDA-Developers mobile app

Related

[Q] S7562 Phone Problem

Hi Guys,
I am having a big problem with my mobile phone. It is a chinese GT-S7562 and was a present of a chinese
friend who wants me to be online when I´m in shanghai.
I was able to change the language to english, but may apps and part of the system were still in chinese.
So I decides to flash a german firmware (my home country).
Everything went fine, I was able to make all the settings and access the play store and get updates from
samsung.
But if I try to make or receive a call the mobile signal gets lost and the simcard shows a circle with a dash
in the middle. After a reboot I have full signal strengh, but after a call attempt it gets lost again.
I tried mulitple simcards in both slots, no change.
I even tried different firmware, even custim ones, but nothing helps.
Currently i am on a stock fw 4.0.4
Baseband S7562ZCMG1
Build number IMM761.S7562XXBMD6
Does anybody have a hint for me how to solve that?
Manythanks,
Jo
Same problem
I also have the same problem...pls help us....
JoMensdorf said:
Hi Guys,
I am having a big problem with my mobile phone. It is a chinese GT-S7562 and was a present of a chinese
friend who wants me to be online when I´m in shanghai.
I was able to change the language to english, but may apps and part of the system were still in chinese.
So I decides to flash a german firmware (my home country).
Everything went fine, I was able to make all the settings and access the play store and get updates from
samsung.
But if I try to make or receive a call the mobile signal gets lost and the simcard shows a circle with a dash
in the middle. After a reboot I have full signal strengh, but after a call attempt it gets lost again.
I tried mulitple simcards in both slots, no change.
I even tried different firmware, even custim ones, but nothing helps.
Currently i am on a stock fw 4.0.4
Baseband S7562ZCMG1
Build number IMM761.S7562XXBMD6
Does anybody have a hint for me how to solve that?
Manythanks,
Jo
Click to expand...
Click to collapse
rajput555 said:
I also have the same problem...pls help us....
Click to expand...
Click to collapse
Hi!
Found help in another forum. May I post the link here?
w**.android-hilfe.de/samsung-galaxy-s-duos-s7562-forum/479190-fuer-den-chinesischen-markt-bestimmtes-s-duos-umflashen-klappt-nicht.html#post6466073
There is a problem with the 3g module, you have to use the chinese firmware.
Jo
JoMensdorf said:
Hi!
Found help in another forum. May I post the link here?
w**.android-hilfe.de/samsung-galaxy-s-duos-s7562-forum/479190-fuer-den-chinesischen-markt-bestimmtes-s-duos-umflashen-klappt-nicht.html#post6466073
There is a problem with the 3g module, you have to use the chinese firmware.
Jo
Click to expand...
Click to collapse
Thank you very much for the help :victory:...I went thru the link...I have not noted down my original chinese firmware...I downloaded one S7562ZCAMH1_S7562CHNAMH1_S7562ZCMH1_HOME.tar.md5, but this is getting stuck at logo....Can you send me the link or name of the firmware which i can flash....that would be of great help...Is ur phone alright now?
Back to chinese firmware....
JoMensdorf said:
Hi Guys,
I am having a big problem with my mobile phone. It is a chinese GT-S7562 and was a present of a chinese
friend who wants me to be online when I´m in shanghai.
I was able to change the language to english, but may apps and part of the system were still in chinese.
So I decides to flash a german firmware (my home country).
Everything went fine, I was able to make all the settings and access the play store and get updates from
samsung.
But if I try to make or receive a call the mobile signal gets lost and the simcard shows a circle with a dash
in the middle. After a reboot I have full signal strengh, but after a call attempt it gets lost again.
I tried mulitple simcards in both slots, no change.
I even tried different firmware, even custim ones, but nothing helps.
Currently i am on a stock fw 4.0.4
Baseband S7562ZCMG1
Build number IMM761.S7562XXBMD6
Does anybody have a hint for me how to solve that?
Manythanks,
Jo
Click to expand...
Click to collapse
Hey finally I installed chinese firmware baseband and finally mobile signal is alright...working perfect...As I told last time I was stuck at the
samsung logo...then I off the phone and went into recovery....there I did the factory wipe and cache wipe...then rebooted...voila....it booted...
everything working fine....1 thing i learned is u should not put other country baseband in chinese phone....if u can let me know wat i can do for
google play store...that would be help ful....
google play in phone brought from china
rajput555 said:
Hey finally I installed chinese firmware baseband and finally mobile signal is alright...working perfect...As I told last time I was stuck at the
samsung logo...then I off the phone and went into recovery....there I did the factory wipe and cache wipe...then rebooted...voila....it booted...
everything working fine....1 thing i learned is u should not put other country baseband in chinese phone....if u can let me know wat i can do for
google play store...that would be help ful....
Click to expand...
Click to collapse
Another point I wanted to add was...you can easily install the google play in the phone brought from china by rooting the phone and with the help of 'RE explorer' app you can put three apk files in the given link into system/app folder....then reboot the phone thats it....google play will work...follow this link----http://forum.xda-developers.com/showthread.php?p=31236432

Needing new firmware for Southern Telecom SmartTab Tablet...

Ive got an android tablet that is having trouble after rooting with kingroot.
Worked fine for a while after rooting, main reason I rooted was to remove the bloatware installed (full of disney apps etc)
After removing the apps, then i started having trouble after reboot, and the following message keeps appearing and wont go away.
"unfortunatley, the process com.android.systemui has stopped"
Hopefully im asking in the right area here, but im hoping i can find a decent firmware with the bloatware removed , and hope that flashing will fix this once and for all at the same time.
What complicates this is that this model is for the New Zealand market and i think they are renaming another model number for New Zealand.
If another firmware is available that i can flash onto this tablet, it would be great thanks
Specs:
Its produced by southernTelecom
Model: ST10NZ
Android 4.42
firmware 2.01
kernel version 3.4.67
build number
ST10_20141217
BN: (another build number) 01.04.006.074.07
bump
Here is a link to the product.
https://www.pbtech.co.nz/index.php?...ab-ST10-10-Android-Tablet-for-Kid--Work---Qua
Bumping.
Anyone able to help find a ROM?
bump
If it's any help, I'm having the same problem, still unable to find a solution, mines the ST13, but have the same problem with "com.android.systemui" - Be keen if you find a solution, I'm happy to restore the original ROM (or custom) but unable to find either as yet.
Here's hoping...
net nanny
waynez2016 said:
If it's any help, I'm having the same problem, still unable to find a solution, mines the ST13, but have the same problem with "com.android.systemui" - Be keen if you find a solution, I'm happy to restore the original ROM (or custom) but unable to find either as yet.
Here's hoping...
Click to expand...
Click to collapse
net nanny is hardcoded and dont remove netlauncher 3 . if you deleted it, it breaks the android.ui and there is no recovery image.
If anyone can come up with a ROM image, that would be great.
I also have been told here to try downloading net nanny off google play.
Apparently that works.
waynez2016 said:
If it's any help, I'm having the same problem, still unable to find a solution, mines the ST13, but have the same problem with "com.android.systemui" - Be keen if you find a solution, I'm happy to restore the original ROM (or custom) but unable to find either as yet.
Here's hoping...
Click to expand...
Click to collapse
Im looking for the stock ST13 firmware & ROM any chance you can upload i have three I've burned through and my backup got tainted?
XxKodedxX said:
Im looking for the stock ST13 firmware & ROM any chance you can upload i have three I've burned through and my backup got tainted?
Click to expand...
Click to collapse
If a ROM could be found it would be great.
I got mine working again after reinstalling the netnanny app from the play store, fixed it. But it still does not run flash.
Net nanny
re downloading net nanny from the play store does work, at least to get it working again. I had a problem that after that message popped up a few times (com.android.systemui failed to load) or whatever, I couldnt click on anything. AFTER I factory reset the tablet, that problem stopped. The message kept popping up, but I was able to click "OK" and type a few letters on the setup page lol. I got into the play store, found net nanny, downloaded it, and SHAZAM! Its working again. i JUST WANT TO PLAY MY GAMES LOL. THANKS TO WHOEVER FOUND THIS OUT! I hope this helps the next person that un-installs net nanny lol. BTW, I contacted southern telecom and said I got a virus or whatever and requested a website to download the firmware, so if they give me that information, I will share it with you all
Any news on that link for the firmware
Playing with a ST13 now, the os disappeared and tablet is stuck at bootloader, unable to do anything at this point. Windows does not recognize tablet and now I am out of options.
Anyone have any ideas thoughts?

Problem with Lava Iris 870 flashed with MIUI 8.2

Hello everyone.
My girlfriend had been having problems with the installation of Whatsapp since a couple days ago. It told her that it needed to be re-installed, and doing so wouldn't help.
After trying with resetting the phone to factory defaults to no avail, I decided trying to install a custom mod for the phone but I couldn't find any reliable one. I tried with one called MoKee with which not even the home key worked and then I looked for a stock version and found an alleged one in a ad-ridden page. It's supposed to be installed using something called SP Flash Tools, which seems to be made by a chinese company or group, but the image wouldn't flash to the phone because it encountered a 'CHIP Error'.
So far, the only image that seems to be working is one that I found in another unreliable web-page. It is a MIUI distribution supposedly made for this phone, but it won't detect the SIM card in any of the two slots the phone has and it seems like it can't even find the IMEI in either of the two chips I suppose it has for handling the SIM cards, because it keeps popping a message that says something along the lines of "Invalid IMEI".
I'm desperate.
Is it possible to install the necessary drivers for the SIM card chipset on the phone, or do you know about some repository where I could find the stock firmware for it?
Right now, I'd just want the phone to be in operable conditions, Whatsapp issues aside.
For reference, the model on the back of the phone just says "iris 870", and this is the name of the MIUI distribution I downloaded: "Miui_8_For_Lava_iris_870_[wwwromclaimscom].zip"
I hope someone can help me with this. Thanks in advance.
P.S. I posted this also on the newbie-friendly section, sorry for the duplicate post.

Help - Connection problem after upgrading Android 8.0 - Samsung galaxy s7 edge

Hello everyone. I have a samsung galaxy s7 edge (SM G935F) and i recently received the android 8.0.0 from samsung. Downloaded and installed directly via the cellphone.
But after updating i am getting this internet/connection drop issues a lot.
Now a lot of times when im connected in wifi or using the 4g mobile internet, im getting a lot of internet lag/drops. Example: at whatsapp, when i sens a message, the clock appears and only after a little rhe time the message is send.
Example 2: at facebook, somerimes it lags and takes too long to load the content (same happening in instagram). Or at clash of clans, it is showing that symbol of internet issue.
Besides those internet bugs/lags, the android 8.0.0 is ok.
I already did a factory reset yesterday via the phone, and saved the files with smart switch. But the problem persists. I also checked and my wifi internet and my mobile internet are ok.
Does anyone knows how to fix this issue? Is there a newer version of the ROM, maybe? Or if not, is ir possible to downgrade to android 7 again (really wouldnt like this option but....)?
If anyone could help that would be great. But for the record:im really newbie at android stuffs....if you can help, please could you explain step by step?
Thanks everyone
lokoroxbr said:
Hello everyone. I have a samsung galaxy s7 edge (SM G935F) and i recently received the android 8.0.0 from samsung. Downloaded and installed directly via the cellphone.
But after updating i am getting this internet/connection drop issues a lot.
Now a lot of times when im connected in wifi or using the 4g mobile internet, im getting a lot of internet lag/drops. Example: at whatsapp, when i sens a message, the clock appears and only after a little rhe time the message is send.
Example 2: at facebook, somerimes it lags and takes too long to load the content (same happening in instagram). Or at clash of clans, it is showing that symbol of internet issue.
Besides those internet bugs/lags, the android 8.0.0 is ok.
I already did a factory reset yesterday via the phone, and saved the files with smart switch. But the problem persists. I also checked and my wifi internet and my mobile internet are ok.
Does anyone knows how to fix this issue? Is there a newer version of the ROM, maybe? Or if not, is ir possible to downgrade to android 7 again (really wouldnt like this option but....)?
If anyone could help that would be great. But for the record:im really newbie at android stuffs....if you can help, please could you explain step by step?
Thanks everyone
Click to expand...
Click to collapse
I have the same phone but in my region the OTA 8.0 upgrade didn't arrive yet so I took a french official 8.0 for SM-G935F and installed it. After about one week I can tell it works like a charm and even better than before with the Marshmallow firmware. I don't see a solution with your specific connection problem but I can try to find and bring you the OS that I downloaded and used if you want.
AlonzoGrande1 said:
I have the same phone but in my region the OTA 8.0 upgrade didn't arrive yet so I took a french official 8.0 for SM-G935F and installed it. After about one week I can tell it works like a charm and even better than before with the Marshmallow firmware. I don't see a solution with your specific connection problem but I can try to find and bring you the OS that I downloaded and used if you want.
Click to expand...
Click to collapse
mate if you can post here the download link of your OS would be great !!! So i install it and do a complete reset & cache wipe.
Did you downloaded at Sammobile ???
lokoroxbr said:
mate if you can post here the download link of your OS would be great !!! So i install it and do a complete reset & cache wipe.
Did you downloaded at Sammobile ???
Click to expand...
Click to collapse
NO, i can't seem to remember where i downloaded the firmware from, but I am sure it wasn't from Sammobile because it take ages to download. But I still have it on my laptop so I'm uploading the .rar on mediafire.
All you have to do:
Get Odin
Get the ROM (extract it separately, you should see the AP, BL, CP, CSC components)
Cause I am a new user on the forum it doesn't allow me to post external links so let's get around that:
type in w w w. mediafire . com /file / tx3676bj71vz17f/G935FXXU2ERD5_G935FOXA2ERD5_BTU.zip (copy paste and remove all the spaces)
Activate USB debugging (google that, you can get it in 30 secs)
press and hold power+home_button+volum_down then press volume_up when it asks you to confirm that you know what you're doing.
Open Odin, you should see that your phone is recognized (in the top left rectangle it shows COM something.
Add the AP, BL, CP and CSC from the folder to Odin by pressing the specific buttons and then selecting them, wait between them if necessary, it will tell you.
Make sure re partition is not ticked in the options tab.
after everytihng is ready, click start and wait some time.
When it is done you should see PASS in green and your phone restarting.\
From there you just have to configure your new OS. Bare in mind that you should know the google acc and password that you had on the phone before, else it will get FRP locked.
Hope this helps, If you have any questions feel free to ask.

Huawei Honor Pad 2 unable to connect to Wifi after system update

Hi, this is my first time posting on xda forum, so if my post has some problems, I'd be delighted to correct.
So, I bought the Huawei Honor Pad 2 tablet about a year ago, and about last month it asked me to upgrade the system, and after the upgradation, the wifi icon becomes greyed out and I'm unable to turn it on. I tried to factory reset and wipe its cache partition but still no luck.
I dont know whether to flash its firmware would solve the problem but a few sites I stumbled upon, none of the links works(e.g. huawei-firmware rom links for my tablet model number don't work)
Some searches suggested it could be my hardwares malfunctioning, but since the wlan option greyed out problem only occurred immediately after the system update, I wonder if reflashing a new rom would work.
So I have run out of ideas, also I could not find honor pad 2 on the official huawei website, nor on xda forum, it mostly gives me mediapad as a result, but they seem different on pictures.
And some specs about my tablet:
Model: JDN-W09
Build Number: JDN-W09C233B023
EMUI Version: 4.0.3 (can't remember the original version but this is the one I got after that horrible system update)
Any helps are greatly appreciated!
up
up
uuuuuuuuugggggggggghhhhhh
Hi,
I had the same update,and we have the same specs,but tell me please how did you manage to get google play and all other google things to work?Maybe its because you are rooted?
It seems we are the only ones that we have this tablet,cos i can't find anything about rooting it or solve the google play problem without rooting.The worst thing is that nobodys bothering to make a post about it cos maybe the tab had been bought by a few people.
I don't have your problem,mine is working ok but my problem is way greater.I have done cache clears,download and intstall google services several times and some other tricks that i found on the net but nothing seems to work.
One click rooting methods:none of them work!
The οnly sure thing that we both need is a guide of how we are going to update the firmware to an earlier version(stock firmware)
Here on XDA i found only guides for phones of honor or tabs like media pad m2 that they seem to be similar but yet...i'm not sure.
I hope someone will take the time to answer on your post and our problems with this awesome tab!
I have also upgraded my Honor Pad 2 JDN-AL00 model to EMUI 4.0.3 B023 latest firmware and faced similar issues of Google apps not able to run anymore. I have tried to rollback the update by reflashing with older firmware versions. The update process shows success but when I boot up the set it still shows B023.
After researching the net, I think the problem could be because the older firmwares found in huawei-firmware.com are all OTA which means they are incremental updates. To fully rollback to earlier versions, I think we need Full OTA firmware. So far the only one that I can find on the net is B018 version. It’s abt 1.7GB. I have not gotten down to test out my theory. If you’re keen you can give it a shot and let everyone here know if it works...

Categories

Resources