Related
Hello.
I made a quick write up of the process I followed last night to root my new Tmobile LG G2 on 4.4.2 software version D80120A because I could not find one. so I had to piece together my own plan of attach based on a few threads.
I wanted to add it to the CM wiki but apparently making changes to a wiki is not as simple as it seems. With that said I would like to post it here but I don't know how to do it in a politically correct manner to give everyone appropriate credit and not break any rules. I am posting my steps below, if someone knows how to quickly convert this into a standard that complies with forum rules and can either help me or post it in the correct section I would really appreciate it.
Also, Please double check my guide. I need a fresh set of eyes to critique the procedure in case I missed something.
Thank You
Ensure that you have LG G2 drivers installed before you get started.
1. Enable Developer Options on the device
1. Go to Settings
2. Go to About Phone
3. Tap Build Number 5 times.
4. Enable USB Debugging on the device
2. Enable USB Debugging
1. Go to Development Settings
2. Check USB Debugging
3. Enable Unknown Applications
1. Go to Setting
2. Go to Security
3. Check Unknown Sources
4. Root the phone
1. Go to https://towelroot.com/ and download the .apk.
2. Find and run TR.APK
3. Click "Make It Rain"
4. Reboot the device
5. Download the D801 CM11 M8 image and GAPPS
1. Plug your phone into the computer copy both to your phones emulated SD Card through MTP mode.
6. Install Recovery
1. Download AutoRec to your computer, in this case for the "D801". It can be found here: http://forum.xda-developers.com/showpost.php?p=51857807&postcount=1
2. Copy AutoRec to your phone and run it
3. If you see three check marks hit flash
7. Prepare to install Cyanogenmod
1. Reboot into Recovery and Make a backup of the current Rom
2. Hit backup and swipe to take a nandroid of the current ROM
3. Press back to get to the main screen
4. Wipe the device
5. Hit wipe then hit advanced
6. Select Dalvik Cache, System, Data, Cache
• DO NOT, DO NOT CHECK INTERNAL STORAGE
7. Swipe to Wipe
8. Press back to return to the main screen
8. Install CM 11M8
1. Press install and find the location of the CM11 M8 zip file
2. Swipe to install
3. Press back to return to the main screen
9. Install GAPPS
1. Press install and find the location of the GAPPS zip file
2. Swipe to install
3. Press back to return to the main screen
10. Press Reboot -> System
11. You should now see Cyanogenmod Boot up.
If the system gets stuck at the Cyanogenmod boot screen for longer than 10 minutes you will need to go back to recovery and wipe Dalvik and Cache. To do this you need to shut off the phone. Hold the power button until the phone turns off but don’t let go right away, the phone will first reboot and the LG logo will appear. You need to keep holding the power button past this point until the phone powers off.
Once the phone is off hold the power and down arrow until you see the LG logo then quickly release and re-press power and down. If you did this right you will be taken to “Factory Hard Reset”. Don’t worry. Hit power three times and then confirm. You will be taken to TWRP where you can wipe the cache and dalvik.
my software version is D80120e. will that make any difference in the Autorec department. I've rooted with towel root and its great, but I'm deathly afraid of bricking my phone via installing custom recovery. I have the tmobile variant and did you have any trouble whatsoever with autorec?
let me know. I want to install stock aosp rom on my g2
brandonnathaniel said:
my software version is D80120e. will that make any difference in the Autorec department. I've rooted with towel root and its great, but I'm deathly afraid of bricking my phone via installing custom recovery. I have the tmobile variant and did you have any trouble whatsoever with autorec?
let me know. I want to install stock aosp rom on my g2
Click to expand...
Click to collapse
I have had no issues with Autorec. From my understanding the application has some checks in place to ensure you don't install it on the wrong device. But also, make sure to download the right one as there are several one for each variant.
[Guide/tutorial] Samsung Galaxy Grand Prime VELTE/G531F from stock to custom ROM
[Guide/tutorial] Samsung Galaxy Grand Prime VELTE/G531F/grandprimevelte from stock to custom ROM
This detailed step-by-step guide helps you transform your Samsung Galaxy Grand Prime VE/LTE/531F to a powerful one with a custom Android 5.1.1.
Make sure your phone is SM-G531F before going further : in Android, go to Settings -> About -> Check model is G-531F.
AND note down the baseband version in a safe place (in case of device brick) : G531FXXU1APG2 in my case.
If not, quit this tutorial.
### Phone is reset and you can't access Android ? Shutdown phone, start in Recovery Mode (Hold Power + Home + Volume+) until you see Samsung logo and release buttons.
### In the recovery, on the 2nd line, look at the right part of the string after the . : G531FXXU1APG2 in my case, the first letters show G531F. It's good.
### AND note down the baseband version in a safe place (in case of device brick) : G531FXXU1APG2 in my case.
### If it is another model, quit this tutorial.
CHANGELOG ------------------------
v2. Enhenced FRP Lock bypass
v1. Initial release for Android 5.1.1
1) DOWNLOAD ---------------------
- djibe Galaxy Grand Prime VE/G531F pack v1 : http://bit.ly/djibe-grandprimeve-g531f-v1
(contains preconfigured Odin 3.13.1 + Samsung drivers + TWRP3.0.2-0 unofficial recovery + DeviceID app).
Unzip files from my pack.
+ ROM CS-Rom 3.2 (Android 5.1.1) : https://forum.xda-developers.com/grand-prime/general/g531f-galaxy-grand-prime-custom-stock-t3683569
Download from : http://bit.ly/grand-prime-csrom32
+ a microSD card. Copy ROM and deviceID.apk file on microSD card (FAT32 format) and insert it in phone.
+ Charge phone to 100 %
2) BACKUP DATA -------------------
Install Samsung drivers (you unzipped earlier).
Then plug phone to PC in File transfer mode.
Collect all .jpg or .mp4
Use an app like Backupyourmobile to backup texts, contacts, etc.
Check that backup is located on microSD card.
Then copy the backup on your PC.
3) FLASH TWRP3.0 RECOVERY ----------------
Shut down phone.
Boot in Recovery mode : Hold Home + Power + Volume+ until you see Samsung logo and release buttons.
Navigate with volume buttons to go over wipe data/factory reset menu. Confirm with Power.
Confirm again with yes using same buttons.
Shutdown phone.
Boot in Download Mode : hold Home + Power + Volume- until you see the download mode screen and release.
Confirm with Volume+.
Look at the FRP Lock line (5th line). If FRP lock is off, follow these instructions.
### If FRP Lock is on, move to the chapter below : 3bis)
Connect phone in USB, wait for bootloader drivers installation.
Then launch Odin.exe (included in my archive) and wait for Odin indicator ID:COM to become blue.
In options: Verify Auto Reboot and Re-Partition are NOT ticked while F. Reset Time is ticked.
On the right panel -> in AP menu -> select twrp-3.0.2-0-grandprimevelte.img.tar included in my pack.
### Don't use other menus like BL, CP or CSC (I desactivated them but we never know).
### Warranty will be Void after next click ###
Click Start.
Power Off phone when PASS! green message appears : hold Power + Home + Volume- until phone is shut.
3bis) Reset internal memory to bypass Google FRP lock. ONLY IF FRP LOCK IS ON in bootloader mode
If FRP lock is on, follow this chapter.
Boot in recovery mode (Hold Power + Home + Volume+ and release when Samsung logo is appears).
Use volume buttons to select Wipe data/factory reset, confirm with Power button.
Use volume buttons to select Yes -- delete all user data, confirm with Power button.
Then select Power down.
Go back to step 3.
### If it is still not working, follow next chapter 3ter).
3ter) Factory reset is not enough to remove FRP Lock
Go to SamMobile.com and create an account (Join button): https://www.sammobile.com/join/
Select the FREE join, complete registration.
Confirm registration by clicking on the verification email.
Now visite this page : https://www.sammobile.com/firmwares/galaxy-grand-prime/SM-G531F/
Select your corresponding country.
Now there are many versions for your country : look in the PDA column for the ones corresponding to your Baseband version you noted earlier (G531FXXU1APG2 in my case).
Preferably chose the one independant from a telecom operator, click on this line.
Then download the firmware, it's huge so be patient.
You then have a zip file on your PC. Unzip it 1 time (using 7-zip or other tool) to keep the file named like : G531FXXU1APG2_G531FOXX1APG2_G531FXXU1APG2_HOME.tar.md5
Start phone in recovery mode again, connect it to PC and Launch Odin.exe.
In AP, set this brand new ".tar.md5".
Wait for Odin to control md5 signature.
Then flash it. Be patient, all the partitions of the phone are being reset.
When Odin green success message appears, disconnect from PC, shut phone down by holding Power + Home + Volume-.
Now start phone in Download mode right away, FRP Lock line should be OFF.
Go back to step 3) at this line : "Connect phone in USB, wait for bootloader drivers installation.".
4) FLASH CUSTOM ROM
Start phone in recovery mode
TWRP is launching and reboots.
Check never show this screen during boot again and Swipe to Allow Modifications on first TWRP launch.
Go to Wipe menu -> Advanced Wipe : check Dalvik/ ART Cache, cache, system, Data and Internal Storage partitions.
Then Swipe to Wipe and wait for operations pending.
Go back to TWRP Home menu. Then tap on Install -> choose CSR*.zip
### If you don't see the files, tap on Select Storage and make sure Micro SDCard is active
then Swipe to confirm Flash.
Wait for operation to end.
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System.
Wait for the phone to boot during 10 minutes.
5) ROOT ACCESS
The ROM has SuperSU preinstalled so no extra work to do.
6) CALIBRATE BATTERY
In Google Play Store, download App Battery Calibration (from IMobS Ltd).
Launch the App.
Confirm root acces.
Plug tab and wait till charge hits 100%, then hit BATTERY CALIBRATION and unplug it.
You can use GPS Status & Toolbox app for faster GPS fix.
7) OBTAIN GOOGLE MOBILE SERVICES (GMS) CERTIFICATION
Google now restricts Google Play and Google apps access to certificated devices. Since you have a custom ROM, you are banned.
We now need to subscribe for the Google Play Certification.
In Android, go to Settings -> Security and activate the Unknow sources
Now use the built in File explorer app to install the deviceID app from you microSD card.
Install it, launch it.
Tap on the Google Service Framework (GSF) line, then tap on the COPY button.
In your Android webbrowser, go to : https://www.google.com/android/uncertified/
Connect to Google using your Google/Android account.
In the input field of the page, paste the 16 digits code.
Click on the Save button, a success message confirms your device is Certified.
Do I need to re-certify it ?
"Your device’s GSF ID is reset every time your device is factory reset (or when you wipe the GSF app itself) since it is stored in your data partition, so you must re-register your GSF ID every time you perform either of these actions."
More info here : https://lineageos.org/Google-Play-Certification/
Enjoy,
djibe
Thanks : @adiJ5FN
Thanks @djibe89.
But I cannot install Root. Log there
Myself custom ROM install perfectly.
sashokmc said:
Thanks @djibe89.
But I cannot install Root. Log there
Myself custom ROM install perfectly.
Click to expand...
Click to collapse
Hi, root is built-in the ROM.
With what app the root is failing ?
djibe89 said:
Hi, root is built-in the ROM.
With what app the root is failing ?
Click to expand...
Click to collapse
I try install myself rom G531FXXU1AQK2 and supersu root zip. whatch log.
myself rom. https://drive.google.com/drive/folders/1Mv10hBhAvl23xlOPoGjNM4_rtO6sx8hS
sashokmc said:
I try install myself rom G531FXXU1AQK2 and supersu root zip. whatch log.
myself rom. https://drive.google.com/drive/folders/1Mv10hBhAvl23xlOPoGjNM4_rtO6sx8hS
Click to expand...
Click to collapse
Hi,
so you are trying to root an official firmware isn't it ?
I can't seem to find the custom rom you posted. Everytime i press on the google drive link it says '404 not found' Could someone help me with this issue?
TheGiovan said:
I can't seem to find the custom rom you posted. Everytime i press on the google drive link it says '404 not found' Could someone help me with this issue?
Click to expand...
Click to collapse
True, happily I kept it in case of crash.
http://bit.ly/grand-prime-csrom32
Enjoy
Hi guys, don't hesitate to report errors in my tutorial.
hi, i followed your tuto step by step then im in the new rom now and it works well but my FRP LOCK is back to ON and im not allowed to reboot in recovery mode anymore, i get a message in red (custom binary blocked by FRP).. I reflashed the stock rom then redo all the process but with the same issue. Can you help me with it please? thanks
estemanito said:
hi, i followed your tuto step by step then im in the new rom now and it works well but my FRP LOCK is back to ON and im not allowed to reboot in recovery mode anymore, i get a message in red (custom binary blocked by FRP).. I reflashed the stock rom then redo all the process but with the same issue. Can you help me with it please? thanks
Click to expand...
Click to collapse
Hi,
Sincerely I didn't try to access recovery again.
At least you can log to a phone where you don't know the original owner.
Sorry for that.
Looked up for newer packages for 531f.
This tutorial is up to date.
What is the best rom for this 531f phone? My mom has one and on stock rom it sucks badly.
crisbm said:
What is the best rom for this 531f phone? My mom has one and on stock rom it sucks badly.
Click to expand...
Click to collapse
Hi, no ROM is available for 531f, except the one I cite in this tuto.
crisbm said:
What is the best rom for this 531f phone? My mom has one and on stock rom it sucks badly.
Click to expand...
Click to collapse
Oooooops.
LineaOS 13 is available but marked as unstable : https://forum.xda-developers.com/grand-prime/development/lineageos-13-0-grand-prime-velte-t3874411
However users say it is pretty stable for a daily usage.
Read carefully the manual.
crisbm said:
What is the best rom for this 531f phone? My mom has one and on stock rom it sucks badly.
Click to expand...
Click to collapse
Latest Official Firmware with root (tutos available)
Optimized it myself by removing all crappy software pre-installed and some unnecessary services
Set Nova Launcher as default since TouchWiz is laggy asf
Updated
Hello there, I found 4 working custom roms for sm-g531f. This rom is great.
I just wanted to know if i can change the launcher back to touchwiz, i liked it more
ShakthiNandan said:
Hello there, I found 4 working custom roms for sm-g531f. This rom is great.
I just wanted to know if i can change the launcher back to touchwiz, i liked it more
Click to expand...
Click to collapse
Hi, Touchwiz is proprietary.
You can try Lawnchair or Nova launcher.
djibe89 said:
Hi, Touchwiz is proprietary.
You can try Lawnchair or Nova launcher.
Click to expand...
Click to collapse
oops, ok
the battery life with this rom is 10 times better than the lineage rom and even the stock rom.
I'll stick with this rom
Awesome work.
Hi Guys
Today I want to bring some simple and effektive Insights on proper Device & Software Management and also about Mistakes on the Way and Solutions! :good:
So make yourself comfortable and check this out! It will really help at one point or another!
Well well, so after a really long and stressfull day with no sleep at all for now straight 40h, I just got a HUGE Relief, that I finally found a Solution for this Struggle!
Over the Years it got much more complicated with rooting etc because the Manufacturere make it more complicated every year and protect their (our) devices.
So after beeing in the Community for a While I want to give back! And also give out a HUGE THANKS for everyone here in the XDA Community & who is here and helps in some way! :fingers-crossed::highfive:
And especially really big THANKS! to all the great developers here!
What happened?
(you can find the whole struggle here - in this thread (there was no help...!))
Yesterday, when I was tired, but I wanted to "quickly Update" to latest Firmware of Beyond Rom (from 5.2 to 5.8)
But then it all went wrong. I made some hasty actions and so Mistakes followed and it all went wrong in some way or another...
Basically I screwed up my System and it would be gone ! So I thought, unti now! But let me explain first and write about Mistakes one can make... (dispite having alot of experience over the years)
MISTAKES
Not to make a proper Backup, before modifieng anything on the System!
This is one of the worst mistakes, because when it's gone - it's gone! All the Time, Work and Unique Things (Pictures/Videos/Conversations etc)
• No Backup
• No/little Preparation
• Risky Filemanagement
• Hasty work
• work too tired on complicated or critical things
Problem:
Yesterday I saved the FULL TWRP SYSTEM/DATA/etc Backup on the internal Backup, because the 200 GB external SD-Card was full or didn't had enought Space... (I didn't removed all the Photos and Videos I made for a while)
AND not only that - I also did save the whole November on the internal SD-Card and did not make an extra BACKUP!! (NOTE: copy all unique files from internal SDCARD to hard drive - before flashing the new ROM-Update!) :cyclops:
Also after that I thought, I didn't had the right TWRP Version (not latest) and quickly decided to flash the recovery.img with it, inside twrp as a the last resort... bad Idea, because after that it would not let me in (it wasn't compatible with 5.2 - see the beyond rom thread)
when I made the Combination of Keys: VOLup+Bixby+Power = RECOVERY the screen instantly dissapeared and I was shocked... there was more and more. One Time it says something like "Only use original Firmware..." when I wanted to go to download Modus! Combination VOLdown+Bixby+USB-C-Cable-plug-in = Download Mode
The whole Day I had a really really bad Feeling about this whole thing, I thought it was lost, so many unique pictures (family, spezial events etc) and communications, new contacts etc. everything would be lost!
It was soo hard - that I got a spontanious Idea.... wich probably saved my Ass! I bought a new Galaxy S10 today and flashed about 100 GB up and down of different Versions of DBT Firmware, AP Files and Custom Roms...
Until I got it right!
So I really got into it today and I found those Tutorials here
Solution:
• Found the Samsung S10 Rooting Dynamics & how to avoid the stumbling blocks
• Read the Proper Tutorial & watch a Video on how to do it.
• Combine everything and try it out first in an secure enviroment and then go for the real deal!
• Make sure it works!
• Set your Focus, Heart & Intentions properly! This is the main weapons in life to become sucessful in any situation - in the long run!
CONCLUSIONS:
• Always Backup properly, before working in the System - even on smaller Things - working with Titanium Backup, removing System related Apps) - it might cause a Bootloop afterwards!
• Make at least a Full TWRP Backup, before updating or modifing something critical / System related
• You always come back to your Backup when something goes wrong - you will be happy, you made it, I guarantee you that!
• When its complicated check out multiple Sources & People or someone who made it very good - when you want to learn to be successful with the thing you do.
• Don't decide to quickly when it has big consequences (I could have taken my older Backup from 1. November by this time)
• You always will find a good solution - in the end - if you focus on finding the solution as long as it takes and in several tries - don't let complicated things or fails overwhelm you.
I'm now really happy, because everything went good in the End and I had some very good Learnings & Experience on the Way!
That what Problems are for... to learn and grow! So don't worry about the Problems to much, but ask & go in the Direction for Solutions! UNTIL - you find the way
I hope you can find something valueble here in.
Ok enought with the Motivation Stuff.
In the next Post I show the concrete steps and what also to keep in mind!
Thanks for reading and best regards
God bless you & you bless all around you :victory:
|||||
S10 Root Tutorial - optimized (orange)
S10/e/+ Root & Custom Rom Guide
Credits go to our Hero TopJohnWu & Developers & Contributors!
I attached the original File (see at the bottom)
Change log
• 21/06/2019 – Initial Version
• 03/09/2019 – Correct typo with Download Mode key combo
• 11/09/2019 – Added link to Telegram group in ROM section
• 11/09/2019 – Added change log.
• 12/09/2019 – Add note about TWRP version
• 07/12/2019 – added some more Notes & Nice to Knows |||||
Details
This guide will help you take your virgin S10 phone to a fully rooted phone running a custom rom.
It is highly recommended that you use an external SD card for this process as the steps has you formatting the internal data a couple of times, so having this on an external SD will keep this all intact.
Also note that MTP to your phone via a PC can get varied results, hence why again using an SD card is recommended as with an adaptor you can plug this straight into your PC and into phone when needed.
You must understand - that you always have to handle the Booting Process manually with the key combinations of Buttons after flashing - else you will have reboots and fails(no twrp etc)!
--Download Latest/your Official Firmware Version (PC)--
• On PC Download Samfirm from the following link: Updato& Sammobile (S10-Example) or search on google
• Extract the zip and run samfirm.exe
• Enter your model and Region (I.E Model=G975F, Region=BTU)
• Tick ‘Auto’
• Click Check Update
• It should show you the latest firmware version
• Click Download
• Firmware will download and decrypt (if Decrypt automatically was ticked)
• Default download location (My Documents)
>> • Prepare those Files (Unpack them) and get them on your External SD-Card - you will need them later <<<
--Download ODIN 3.13.1 (PC - FLASHSOFTWARE) --
• Go here and download the latest version of ODIN
>>> • Be sure to uncheck "Auto-Restart" later on - because there is a Twist to this (see Tipps&Tricks) <<<
--Unlock Bootloader--
**WARNING THIS WILL WIPE YOUR DATA**
• Enable developer Settings
(Settings > About Phone > Software Information > Tap build number 7 times (Enter your device pin)
• Go into Developer option and enable ‘OEM Unlocking’ (Enter Device Pin)
>>> THIS WILL ONLY SHOW UP - IF you have Internet activated (WLAN or 3G/LTE) & you must set your Date 7+ Days into the Future! <<<
• WARNING MESSAGE: Click turn on
• Power off your phone
• Hold Bixby + Volume Down and plug in your phone to your PC
>>> Bixby + Volume down + USB-Cable (plug it) = Downloadmode <<<
Download mode should now be shown
• Hold Volume Up, you’ll get a warning message, then press volume up to accept.
• This will now wipe your data and automatically reboot
• Boot the phone
• Go through initial set-up but skip everything for now
• Enable developer mode again and OEM unlocking (or should be enabled and greyed out)
• You are now done, and your bootloader will now allow ‘Unofficial Images’
--Download Latest TWRP (Phone)--
• On your phone Download the latest TWRP image for your model to the phone external SD card from here
• **NOTE – If you are installing Beyond Rom version 5.3 and onwards then you need to download a minimum of TWRP version 3.3.1-7
• We will need this later….
--Patch Firmware & TWRP File--
• On your PC extract the firmware files (AP, BL, CP and HOME_CSC)
• Copy the AP file to your SD card and enter SD card in your phone
• On your phone download the latest Magisk Manager APK from here
• Install the app.
• You may need to allow to “Install Unknow Apps” for chrome
1. Load up Magisk Manager on your phone
2. Next to ‘Magisk is not installed.” Click Install
3. Click Install on the pop up
4. Click ‘Select and Patch a File’
5. Select the AP file you copied across to your external SD
6. Magisk will now patch the AP file
7. A file called magisk_pached.tar will be created
• Repeat steps 2-4 but this time for the TWRP image file you downloaded earlier to your external SD.
• At the end of this process you should have two files
magisk_patched.tar and magisk_patched.img
• One is a Magisk patched version of TWRP (.IMG) and the other is a Magisk patched version of stock rom (.TAR)
--Rename and repackage--
• Remove the SD card from your phone and plug into PC
• Copy the above files from the SD to you PC
magisk_patched.tar & magisk_patched.img
• Rename the file magisk_patched.img to recovery.img
• Open the file magisk_patched.tar using a zip tool (I.E 7Zip) inside the archive remove the existing recovery.img and replace with the new patched recovery.img you made above
--Download Multi-disabler (Phone)--
• On your phone download multi disabler from here
• Ensure this is on your External SD card
--Download Custom Rom (Beyond) (Phone)--
• Head over to the ROM telegram group to download the latest version of Beyond ROM and tips/tricks and notices the telegram group is here
• Download the latest ROM to your phone.
• Ensure this is on your External SD Card
--Flash Patched File--
• Turn off your phone and boot into download mode (Hold BIXBY + VOL DOWN + Plug in USB)
• Press volume up to enter download mode
• On PC load up Odin
• Using the patched file and other files you extracted earlier place the following files in the following location
AP = magisk_patched.tar (Created above with custom patched recovery.img inside)
BL = BL_XXXXXXX (Extracted from original firmware file)
CP = CP_XXXXX (Extracted from original firmware file)
CSC = HOME_CSC_XXXXXX (Extracted for original firmware file)
• Under the options tab ensure ‘AUTO REBOOT’ is not ticked
• Click Start – This should take 5 – 10mins to complete.
--Full Data Wipe--
**DO NOT SKIP THIS STEP**
• Your phone should still be in Download Mode
• Review the next few steps to familiarise yourself with the button combinations
• Press Power + Volume Down for a few seconds to exit download mode
• AS SOON AS THE SCREEN GOES BLACK
HOLD Power + Bixby + Volume Up
KEEP HOLDING THESE KEYS UNTIL YOU SEE THE TWRP LOGO
• If TWRP runs a script and then reboots, immediately hold the same buttons again to get back into TWRP
--Multidisabler and Date Wipe--
• Click Install and select the Multidisabler.zip you downloaded earlier – DO NOT REBOOT
• Back to main menu in TWRP select WIPE>FORMAT DATA and TYPE YES, CLICK TICK BUTTON
**WHEN COMPLETE DO NOT REBOOT**
• Back to menu of TWRP select WIPE and swipe to do a Factory Reset (Data, Cache and Dalvik wipe) **WHEN COMPLETE DO NOT REBOOT**
• Back to main menu, Click Reboot, and Choose Recovery (Don’t hold any Buttons)
• The system will start booting (and will automatically reboot the first time)
• When booted, complete the initial set-up (Internet Connection is required), If you are going to custom rom, then you can skip logging into your account.
• Open Magisk (if it’s not in your app draw then manually install)
• Complete the steps required by Magisk
--Install Custom Rom (Beyond Rom)--
• Power off your phone
• Hold Power + Bixby + Volume Up until you see the TWRP logo
• Click Install
• Select the Beyond custom rom zip you downloaded to your phone earlier
• Follow the Aroma install options (do clean install the first time)
• When flash is complete, use reboot option and select reboot to recovery.
>>> DO NOT JUST REBOOT AFTER FLASHING - ALWAYS GO BACK IN MAIN MENU > REBOOT MENU & BOOT INTO RECOVERY - SO YOU WILL HAVE ROOT - OTHERWISE NOT! <<
• Congratulations you now have Custom rom installed on your S10.
Notes/Tips/Tricks
• Every time you reboot you will need to use the key combo or..
>>> Do this right after the flashing Process - when you it restarts - or better restart manually <<
◦ Hold Power + Bixby + Volume Up to TWRP logo to enter recovery
◦ Hold Power + Bixby + Volume Up until you see the Samsung warning screen for the 2nd time to boot into rooted rom.
When you get Stuck or something doesn't go well - don't worry - you can always flash a patched TWRP by itself!
• Go to Download Mode
• Use a patched TWRP and put it as recovery.img inside a recovery.tar (you create the archive (pack the .img as a .tar instead of .zip) using 7zip or similar)
• After you flashed it successfully and the screen turns dark (your restart)
- you instantly hold VOLup + Bixby + Power Button ( over the first 2 Screens)
- and let go, but hold VOLup down with your finger UNTIL TWRP comes up! - you are safe now! (almost) :silly: :victory:
>>> DO NOT JUST REBOOT AFTER FLASHING - ALWAYS GO BACK & BOOT INTO RECOVERY - SO YOU WILL HAVE ROOT - OTHERWISE NOT! <<
• Edxposed works for Pie and supports some functionality for Samsung phones like:
◦ Removing high volume warning
◦ Removing high brightness warning
◦ Advance power menu (Reboot to recovery, download etc..)
◦ Details can be found here
Here is a Video as well, wich is good to follow
https://www.youtube.com/watch?v=o3a8YnWT3yk
But after you did this all in the Video - you need to flash patched TWRP!
I recommend to do it right after the patched AP File - let it stay in downloadload-mode, plug the usb-cable out and back in and flash the recovery.tar!
And you will have TWRP and now you can flash ROMS & BACKUP etc !
TWRP has also has File Manager - you can move/copy folders & files from internal to external etc
ok, well I added everything in orange what else was needed to be said! Wich I had to find out the hard way... and wich saves lots of Time!!
I still not slept for over 42 and wrote all this the last 2 hours, because I was so excited and wanted to give back! (and the Backup goes from internal to external at the same time
I will may add more to this Thread here... I have many tipps & tricks... wich is not so easy to find out first
I wish you all the best with your Rooted Samsung S10 S10+ etc
God bless you & sleep well
Best regards :victory:
|||||
More Tipps & Tricks to come :highfive::victory:
Is there a way to root without recovery so you don't trip Knox?
What do you mean advance power menu module , I know only firefds has this option for s series , and this module cause bootloops and apps fc.
highaltitude said:
Is there a way to root without recovery so you don't trip Knox?
Nope, you will always trip knox.
But for me personally, I can't have a device without root & addons etc.
This would give me always a bad feeling of being victim of those big software companies who control my phone almost completely...
I like to have a better standart & not beeing standart
__Michael__ said:
What do you mean advance power menu module , I know only firefds has this option for s series , and this module cause bootloops and apps fc.
Click to expand...
Click to collapse
exactly this.
I also used that module.
You need to be really careful what options you use with it. Just add system ui reboot & reboot to recovery and thats all.
Click to expand...
Click to collapse
||||| said:
exactly this.
I also used that module.
You need to be really careful what options you use with it. Just add system ui reboot & reboot to recovery and thats all.
Click to expand...
Click to collapse
Used this module for 2 days , every reboot getting to bootloop and need to force reboot to boot normaly.
Hoping the dev will come back to us and update the module...
Alternatives I use for rebooting:
In Magisk Manager you can go to "Modules" and there in the uper right corner you find a reboot menu.
You can connect your device to a PC and type "adb reboot recovery"
You can install the app "Simple Reboot" via F-Prot.
DHGE said:
Alternatives I use for rebooting:
In Magisk Manager you can go to "Modules" and there in the uper right corner you find a reboot menu.
You can connect your device to a PC and type "adb reboot recovery"
You can install the app "Simple Reboot" via F-Prot.
Click to expand...
Click to collapse
Thanks mate , never saw this option in magisk:silly:
Also loved the option in firefds to blur qs panel , can't find other module for that..
Good guide how ever it doesn't explain how to get around Knox I almost bricked my phone trying this with out disabling knox but luckily I was able to enter download mode and restore the stock rom via odin.
OzGreatAndTerrible said:
Good guide how ever it doesn't explain how to get around Knox I almost bricked my phone trying this with out disabling knox but luckily I was able to enter download mode and restore the stock rom via odin.
Click to expand...
Click to collapse
Are you able to get around (disable) Knox, if so could you please explain the process? Thanks!
2 questions:
1. Is there actually a way to get around tripping Knox?
2. Can rooting be accomplished on US variants? I seem to recall it has always been the Exynos international models that allow for unlocking the bootloader, but not the US based Snapdragon ones. Is that still the case with the S20 the same way it was with the S10?
cognitivedissonance said:
2 questions:
1. Is there actually a way to get around tripping Knox?
2. Can rooting be accomplished on US variants?
Click to expand...
Click to collapse
1. No
2. https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root
some US carriers block BL unlocking
I have a Canadian s10 build #QP1A.190711.020.G973WVLS3CTA3
WILL THIS WORK FOR ME IF I FOLLOW IT VERY CLOSELY????
I'm really hoping someone who knows better than myself will give me some kind of feedback about rooting my Canadian snapdragon S10. I'm anxious to dig in. But my more cautious side is telling me to wait and see what input I might receive!!??!!??
I'm having a lot of problems with rooting my S10 and can't figure out what I'm doing wrong. . . .
it's a G9730 and I downloaded the latest CHC firmware with SamFirm (checked Decrypt automatically) and using Odin 3.14.1
I followed the videos instructions.
After getting the FW, I copied over the AP with Magisk, ran the file patch and copied the tar file to my PC. Went into DL mode and applied just the AP as instructed, then it goes into a boot loop error no matter how many times I try to go into recovery.
I've tried going from the DL mode (vol down/pow) and then hold Bix, volup, power. I've tried letting go of everything but vol up. tried letting go of all of them soon as the logo pops up. tried from turned off. . . . I just can't get into recovery
So unbricked it back to stock and then I tried to do what the text instructions here say and did all the above along with adding TWRP _3.3.1-9beyondl1te image patch and swapping it with the recover in the patched tar. As per the instructions, I applied the BL, CP, and CSC from the original firmware along with the AP with the TWRP recovery and then it gets even weirder. . . . it gets to the screen with the yellow exclamation mark and red text. . . but has all the stuff from DL mode overlaid above it. . . . it wasn't rebooting on it's own at this point and I had to voldown/pow to shut down and it wouldn't boot back into 'normal' DL mode but kept returning to this screen . I had to try running Odin on it a once or twice, and fail, for it to finally boot back into 'normal' DL mode.
So, at the moment I've unbricked it back to unmolested. . . and have no idea what to do.
I've included an image of what that screen looks like that I was talking about. Also, not sure if this means anything, but the DL mode has a barcode at the bottom. . . and I've never seen this before or in any examples/tuts/videos. . . .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
nailbunnyzq said:
I'm having a lot of problems with rooting my S10 and can't figure out what I'm doing wrong. . . .
it's a G9730 and I downloaded the latest CHC firmware with SamFirm (checked Decrypt automatically) and using Odin 3.14.1
I followed the videos instructions.
After getting the FW, I copied over the AP with Magisk, ran the file patch and copied the tar file to my PC. Went into DL mode and applied just the AP as instructed, then it goes into a boot loop error no matter how many times I try to go into recovery.
I've tried going from the DL mode (vol down/pow) and then hold Bix, volup, power. I've tried letting go of everything but vol up. tried letting go of all of them soon as the logo pops up. tried from turned off. . . . I just can't get into recovery
So unbricked it back to stock and then I tried to do what the text instructions here say and did all the above along with adding TWRP _3.3.1-9beyondl1te image patch and swapping it with the recover in the patched tar. As per the instructions, I applied the BL, CP, and CSC from the original firmware along with the AP with the TWRP recovery and then it gets even weirder. . . . it gets to the screen with the yellow exclamation mark and red text. . . but has all the stuff from DL mode overlaid above it. . . . it wasn't rebooting on it's own at this point and I had to voldown/pow to shut down and it wouldn't boot back into 'normal' DL mode but kept returning to this screen . I had to try running Odin on it a once or twice, and fail, for it to finally boot back into 'normal' DL mode.
So, at the moment I've unbricked it back to unmolested. . . and have no idea what to do.
I've included an image of what that screen looks like that I was talking about. Also, not sure if this means anything, but the DL mode has a barcode at the bottom. . . and I've never seen this before or in any examples/tuts/videos. . . .
Click to expand...
Click to collapse
Same problem here. did it today and it goes to a boot loop. Any help?
bump . . . ?
Thank you so much for this wonderful detailed post! I was extremely lost at where to start before this post!
Hi
I have followed the steps thoroughly and I can access TWRP but once I did the flash/wipes and choose reboot recovery, it still boots into TWRP and not into the rooted Android. Also Power+volup+bixby until 2nd warning leads to TWRP and not rooted system.
I can boot the device on the OS with power on but then I do not have root with Magisk.
S10+ with Android 10
Any advice is highly appreciated!
Thanks in advance,
Metropolis
[Yes, I'm x-posting. Desperate times, etc.]
I can't get there. Could someone point me towards a solution. Here's the OP link
Thanks
Note 5 doesnt have a bootloader
If you want to root or use any custom roms, you need TWRP,
Steps to root:-
1) Download the latest version of twrp.tar for your device from TWRP's website
2) place it in AP in Odin
3) Shut down your phone then press Volume Down, Home Button, Power button simultaneously to boot to Odin/Download Mode
4) connect to your PC and flash twrp
5) Download Magisk v23 from Magisk's github.
6) use an OTG or place it on your phone's sdcard.
7) TWRP is a recovery, so, to open it, shut down your device and then click Volume Up, Home Button, Power button simultaneously until you see the Samsung Note 5 logo, then release the power button only until you boot to recovery.
8) Install it from TWRP
The reason i said v23 instead of v24 is because Magisk Hide is off as default for v24, so, better to install v23 then update magisk later from its app.
Download TWRP for nobleltespr
Download TWRP Open Recovery for nobleltespr
dl.twrp.me
Release Magisk v20.3 · topjohnwu/Magisk
Fix magiskboot crashing when dealing with lz4_legacy format Full Changelog: here
github.com
Oh and welcome to the note 5 xda family
3zozHashim said:
Oh and welcome to the note 5 xda family
Click to expand...
Click to collapse
You are kind. Thank you.
Even with the information you shared, it still wasn't a clear road ahead. After numerous attempts it became apparent that the ROM revision on the phone ( *DRH1) will not allow TWRP to be installed. After flashing the closest ROM I found (*DQJ1), things finally proceeded as you outlined. Thanks again. I was really stuck.
Thank you both, as this information will be vital, as I try to continue to use my N920P as a daily device. As I am needing to update to a more secure version of Android.
PLEASE BEFORE YOU decide to try this rom, you MUST read all of post 1 and 2 (about 3 minute read). If you think this is an unreasonable request, then stop reading now and find another recovery. Thank you.
I am not responsible for lost data, identity theft, lost money, security vulnerabilities, bricked devices or any other hardware or software malfunctions that comes as a result of flashing this software.
BACKUP YOUR DATA BEFORE trying this TWRP.
Source code
Kernel source
https://github.com/retiredtab/android_kernel_samsung_msm8916/tree/lineage-18.1
TWRP SM-T357W Device tree
https://github.com/retiredtab/TWRP_gt58ltebmc
TWRP source code (built using minimal manifest TWRP 7.1)
https://github.com/minimal-manifest-twrp/platform_manifest_twrp_omni
Download TWRP from
https://sourceforge.net/projects/retiredtab/files/SM-T357W/TWRP/
Installation Instructions
Note I do NOT run Windows OS so there are no provided instructions on how to install TWRP using Windows. There's lots of tutorials and videos online on how to install TWRP via Windows. Do your own research. If this is unreasonable to you, don't use this TWRP. Questions regarding how to install TWRP using Windows/odin will go unanswered.
You need to boot the SM-T357W into download mode. Power off. Press home button + power + volume down (farthest away from power button) at the same time. Let go when you see "Warning" text on the screen, then choose volume up to continue. Your screen should now show "Downloading... Do not turn off target"
Linux users can use heimdall to flash this recovery. For example,
Code:
heimdall flash --RECOVERY TWRP_3.5.2_9_SM-T357W_20220125_Unofficial.img
After flashing the recovery image, you must boot into recovery immediately (using the hardware key combination) to run TWRP, otherwise the Samsung software will overwrite TWRP and you will have to start over again. I usually am already pressing the recovery hardware key combination while the recovery image is being flashed. The flash process will be very quick (a few seconds at most).
The recovery hardware key combination is home button + power + volume up (volume up is closest to the power button) all pressed at the same time.
Updates
Unless Android 12 or LineageOS 19.0 requires some mandatory changes to TWRP, this will be the only TWRP build I make for the forseeable future. There will be no planned updates to 3.5 unless there's a major bug or security vulnerability. The only time you need to boot into TWRP is to upgrade the custom rom.
I have been using this TWRP now for almost 2 months before sharing it here.
Reserved.