Hi
I have Huawei Y635-L21 stock on recovery mode I tried every thing to get it back on life, but I failed!
dose anyone have a way to flash it back to normal ?
please help me
anyone can help please ??!!
noone can hekp !!!
I had the same problem. I resolved by reflash in bootloader stock rom, unpacking with Huawei update extractor the update.app file. And then reflash recovery and reflash cm, and all worked. I'm writing now from Huawei y635-l21 on cm 12.1
TheReyMerk said:
I had the same problem. I resolved by reflash in bootloader stock rom, unpacking with Huawei update extractor the update.app file. And then reflash recovery and reflash cm, and all worked. I'm writing now from Huawei y635-l21 on cm 12.1
Click to expand...
Click to collapse
what if:
-usb debuging is off?
-have no backup?
please help
Related
can somebody upload auto_upgrade.cfg fle for me? my x1 stuck at factory reset screen when i try format it..i need it to reflash the firmware..thanks
edit: managed to get the file,but it still stuck at factory reset screen..it would'nt boot to flash the firmware..i was at 4.4.2 emui 3.0 400 dpi rooted..
anyone can help me pls...
tried
1. Downloaded the 7D-501u official stock ROM mentioned in this post http://forum.xda-developers.com/huaw...-b007-t2811863
2. Used Huawei update.app extractor tool from http://forum.xda-developers.com/atta...2&d=1403960391
3. Flashed boot.img, recovery.img and system.img
Code:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
still does not work..after all fastboot it still stuck at android logo..look like formating device..
[problem solved.....i just bout to give up n wan to send to service center ,suddenly it manage to boot up...
kotty said:
can somebody upload auto_upgrade.cfg fle for me? my x1 stuck at factory reset screen when i try format it..i need it to reflash the firmware..thanks
edit: managed to get the file,but it still stuck at factory reset screen..it would'nt boot to flash the firmware..i was at 4.4.2 emui 3.0 400 dpi rooted..
anyone can help me pls...
Click to expand...
Click to collapse
Could you share what firmware version you intend to use?
I'm now on 4.4.2 emui 3.0 400dpi (b005), but I want to go for 4.4.2 emui 2.3, 320dpi (b001). I still can't do it. It always said "update failed" on Recovery screen.
fyi, my x1 is 7d-501u.
did u try using auto upgrade? mean when you on and off your phone it will auto flash the firmware.
mine because can't boot normally and stuck at logo there so i did using fastboot to flash firmware.
Hello,
I need a stock recovery and stock rom for Huawei ShotX (p 7i)
version ATH UL-01
I searched google but unfortunately ineffectively, maybe someone has a link to the above?
shaq8 said:
Hello,
I need a stock recovery and stock rom for Huawei ShotX (p 7i)
version ATH UL-01
I searched google but unfortunately ineffectively, maybe someone has a link to the above?
Click to expand...
Click to collapse
I think you should flash the stock firmware
ok, but how? I currently have twrp not a stock recovery. from what I read to reflash stock rom, should have stock recovery because at trwp can not be done. I understand that as a stock firmware You understand the stock rom? or maybe something else?
@shaq8 you posted in the wrong forum buddy.
But to answer your question I found a Lollipop stock package for your device.
Thanks for the link DigiGoon
but how to flash new firmware? All descriptions refer to the dload method, which I can not use because I do not have stock recovery. Is there any method to reflash new firmware having trwp instaled?
and in fact my mistake. the topic was to be started in the P7 section. If an admin will go on this thread , please transferred to the Huawei P7 section
shaq8 said:
Thanks for the link DigiGoon
but how to flash new firmware? All descriptions refer to the dload method, which I can not use because I do not have stock recovery. Is there any method to reflash new firmware having trwp instaled?
and in fact my mistake. the topic was to be started in the P7 section. If an admin will go on this thread , please transferred to the Huawei P7 section
Click to expand...
Click to collapse
No worries, I'll help you regardless of in which section your thread resides.
So, to flash the UPDATE.APP, follow these steps:
First download the package from the link I provided.
Extract it, and find UPDATE.APP
Now you have to extract the stock recovery from UPDATE.APP using Huawei UPDATE Extractor tool.
After pulling recovery.img you have to flash it to your device via bootloader.
Boot into bootloader mode and flash the recovery by firing this command:
Code:
fastboot flash recovery recovery.img
Now you have Stock recovery installed.
I hope you are on Lollipop only, if your device was rooted, you have to first flash .img files manually and then force update it via UPDATE.APP.
If your device is not rooted then put the UPDATE.APP in dload folder in your External SDCARD, and press the three button combo after switching off your device, the update process will start then.
I hope this clears something.
the phone has root.
Custom recovery already loaded and working.
I understand that now I have a reflash of all files from update.app? the sequence of flashing files has any meaning?
I ask because I would not want to mess up more in the phone
shaq8 said:
the phone has root.
Custom recovery already loaded and working.
I understand that now I have a reflash of all files from update.app? the sequence of flashing files has any meaning?
I ask because I would not want to mess up more in the phone
Click to expand...
Click to collapse
No, you can flash them in any sequence. It doesn't effect in any way.
everything works, phone alive
DigiGoon thank you very much for your help, you saved my life
i have the same broblam but i did not understand anything
I got it fixed by just flashing the stock recovery instead of full ROM.
Stock Recovery here :
https://forum.xda-developers.com/honor-7/development/recovery-huawei-shot-x-aka-honor-7i-t3548163
i hve update my device huawei ATH-TLOOH,but when i try to reflash it through bootloader,it show error(Unlock frp first)
But by device is not started,i try to unlock it through frp erase tool bt it asks 16 digit unlock key,
my mobile is hong kong made,i cant find imie num bcz on the back of my mobile there is chinese language and no imie num is written...
em suck and helpless cant understand what to do...
cant find exact firmware version but if find it says software installation failed also...plz help me
Hello,
I write to tell you about my problem with a rear camera of my Huawei Y6 [SCL-l01][C432B140] and ask for any possible help. I really like to use it and i tried to get it back, but even after back to my firmware and stock recovery my camera doesn't work anymore[You cannot connect to the camera] after first rom flash.
Let's start from begining:
Once i decided to install custom rom on my phone, i done everything like it was on tutorials. I unlocked bootloader, i backup my data and i flash TWRP 3.1.2. Of course, TWRP didn't shown any error or issues, but my backup after restore, cause bootloop of my device and after second reboot startin recovery[not even bootloader of OS].
I tried many fixes to get my camera working on Custom Roms like AOSP, DARKNESS, CM,[ and few from HUAWEI Y6 thread] and I always fails. After few tries i gave up. My problem was that my backup was broken and my recovery was flashed by TWRP. Lucly i found stock recovery for my phone and flashed it.
Stock recovery gave my chance to install my stock rom from UPDATE.app, but after i install my stock lolipop 5.1 - my camera won't work anymore.[Can't connect to the camera, flashlight doesn't work too].
I tought to myself "hell, it could be problem that my original soft is modificated", but luckly i had two smartphnoes of my type SCL-l01[not mine ]. I took copy of working one by TWRP and flash it to my doesn't working... It gave the same result [I used TWRP by fastboot boot twrp.img for survive of my stock recovery] - camera simply wasn't work anymore even after flash the same firmware [once from update.app and second from another scl-l01]
And there is my question - Is it possible to get this camera working again?
Just pls - don't write to my about basics like clear cache or force stop etc , becouse i tried it all.
Thanks for every answer - and sry for my mistakes in my statement.
have the same problem for quite some time, I tried to return to stock with the update.app and the camera no longer worked, and I did not find a way to make the camera work. In stock it does not work, and in ROMS as LineageOS either, eh done the same thing to reinstall the update.app and neither, I think it could be a hardware problem
I clarify, I have a SCL-L03
link plzz
i ccant find the oficial room for scl-l01 cen you guys give me the link:cyclops::crying::crying::crying::crying::crying:
WantedG said:
i ccant find the oficial room for scl-l01 cen you guys give me the link:cyclops::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
http://huawei-firmware.com/rom/huawei-y6/scll01/1194
If you want to flash it, use huawei updater extractor and extract the system.img and boot.img from the update.app and flash it from fastboot.
Or if you have stock recovery make an folder Dload in sdcard and put the update.app here. After that, press power button and volume up and down (your phone needs to be shutdowned)
That's it.
Thanks button works well if I helped
hey! i accidentally deleted a backup for my device and now i have no system to boot off of
are there any roms available for mya-l11? all the ones i see on this sub are for the 2015 models. thanks
lbxda said:
hey! i accidentally deleted a backup for my device and now i have no system to boot off of
are there any roms available for mya-l11? all the ones i see on this sub are for the 2015 models. thanks
Click to expand...
Click to collapse
I could not find any custom Roms for your device.
I could find an stock Rom for the Mya-l41 trough.
Here is an link: https://mega.nz/#!wKpT1ZaS!CV-2E4sNnUwIurskAdqCDpDawWlZD2UeABtSELk_ffc
That should be an update.app or an flashable zip.
You may get Huawei Update Extractor and extract the system.img and boot.img of the update.app
After that flash system.img and boot.img from fastboot.
Warning. This may soft brick your device.
Good luck.
If i helped press the Thanks button
Thespartann said:
I could not find any custom Roms for your device.
I could find an stock Rom for the Mya-l41 trough.
That should be an update.app or an flashable zip.
You may get Huawei Update Extractor and extract the system.img and boot.img of the update.app
After that flash system.img and boot.img from fastboot.
Warning. This may soft brick your device.
Good luck.
If i helped press the Thanks button
Click to expand...
Click to collapse
i was able to flash the boot and recovery image, but i couldnt flash the system image
lbxda said:
i was able to flash the boot and recovery image, but i couldnt flash the system image
Click to expand...
Click to collapse
Does it show an error or anything?
Fastboot flash system system.img
ok, so i found what i thought was a stock rom for my device on some spanish forum and used sp flash tool to install it
problem is, sp flash tool formatted my phone, but encountered an error trying to install the firmware and now my phone wont boot and windows says its not recognised
is there any fix to this? or is my phone bricked?
hey again! i know this post has been a wild ride of me doing stupid stuff and bricking my phone, but i got the firmware back!
only catch is that i'm receiving some nvram error (which i got on my previous phone too. i swear this is the last time im going mediatek), so if anybody has a method that can fix this it'd be highly appreciated
thanks
Hi, Ibxda.
Can you please share with us where you found the stock rom, what went wrong with flashing, and how you managed to get the firmware back?
I have a running system, but I rooted it and cannot apply official upgrades. I'd like to go back, upgrade and root again. I would appreciate the info on your progress.
ifrag_svk said:
Hi, Ibxda.
Can you please share with us where you found the stock rom, what went wrong with flashing, and how you managed to get the firmware back?
I have a running system, but I rooted it and cannot apply official upgrades. I'd like to go back, upgrade and root again. I would appreciate the info on your progress.
Click to expand...
Click to collapse
You should root with Magisk, it's systemless and it should not affect updates. If you want to update you should flash stock recovery. After you updated you are free to flash Twrp again if you want. If you are rooted with SuperSU you should uninstall SuperSU and install Magisk
Hello guys,I tried to root my Honor 7A with no success and now I'm in a bootloop situation.
I first unlocked bootloader succesfully with dc-unlocker2client. Then I installed this TWRP version 0.4 with adb fastboot:
https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447
I couldn't get other TWRP to work.Finally in TWRP I tried to install Magicsk (several versions-18,17,16) but it came up with error 1.
I've dowloaded stock rom AUM-L29C185CUSTC185D1B140 from official site, extracted ABOOT.img, tried to flash it but no success,something wrong with partition, but I cant recall exactly.Then I accidentally did this: fastboot flash ramdisk ABOOT.img .Bootloop!!
I tried to flash extracted ramdisk,kernel,recovery_ramdisk again but still the same issue.I did 2 factory resets in stock recovery but the problem persists.
Please can anyone help?Is my phone wasted??
Anyone please?
michael976 said:
Anyone please?
Click to expand...
Click to collapse
I'm able to be in fastboot mode with adb.Someone to point to the right steps of flashing the stock rom to unbrick the phone please?Merry Christmas to all!
Problem solved!Admin can close the thread!
How did you solved this problem please can you tell me
How you solve it? I GOT SAME SITUATION NOW
Died thread? How u solve it?