Hi guys,
the topic says everything. I am really pissed off, i wanted to make a stock rom phone again and now i messed everything up. Please help me, my phone stuck at 5% of the B330 update. How can I fix this? Please help me.
@MMX35 you can solve this by manually flashing .img files extracted from the ROMs UPDATE.APP via Huawei Update Extractor tool.
Flash those files via this command:
Code:
fastboot flash <partition-name> <file-name>
After this put UPDATE.APP in dload folder of your External SDCARD to fully perform an update.
Hi guys, i got my H9 yesterday and because i thought i read enough on this forums i wanted to unlock it then install TWRP and install superSU to gain root access and stick with the stock firmware.
Unlocking went perfectly fine,phone booted to OS, than i flashed twrp 3.1.1-1 as advertised here and made a factory reset. Phone was stuck in bootloop for unknown reason.
I made several wipes and somehow managed to check all boxes in the wipe menu which erased the whole OS.
Now i read here that others have the "no OS" problem too but because i still have all unlocked fastboot and twrp i wanted to ask which method is best to flash back the original FW.
Which stock ROM is safe to install? i have european H9 is STF-L09C432B170 the right one for me?
Which method is the best to install it? Copy the 3 zips to internal stoagre via OTG device and install it out of twrp? I read that there is also a force method where users can push vol up, vol down and power simultaneously and enter the huawei install force mode.
I am quite sad that the phone was stuck in bootloop after twrp install and still dont know what caused it. When i install it from twrp there are 3 zips: update, data full public , hw eu. In which order do they have to e installed and is one of them overwriting the TWRP recovery?
Please give me a short hint/procedure, im quite afraid that i cant get my phone back to work and it is brand new. I dont know what caused the unsolvable bootloop.
Best regards and many thanks
Hi.
Check this:
https://forum.xda-developers.com/showpost.php?p=73334439&postcount=1
This help you.
Regards
thanks for the hint but i cant find a solution for me there.
ut this
i copied the 3 .zip files to internal today but TWRP doenst allow me to write them it fails with "write err errno 9"
then i tried to copy the update.pp in DLOAD folder on micro sd but this is not possible because filesize is over 2gb. i tried to format micro sd with twrp to exfat but it till doesnt work. please give me a little hint what to do im completely desperate about the situation.
Today i installed Huawei Multitool and extracted the .img file out of the update.app files, i was able to flash all 4, system, boot, recovery and cust.
Now the rec. menu is back to stock and everything got installed but the phone still isnt booting. i think it is because i missed the userdata.img which i cant find anywhere.
Other users here have the same problem. Is there a firmware package which includes all 5 .img data?
Best regards
i found the official huawei service full repair firmware with all necessary files for unbrick (system, cust, recovery, userdata, boot) flashed them via fastboot but stil device is "hanging" after the warning message that its unlocked. i think it is because i wiped vendor data in twrp but i cant flash vendor.img in fastboot. it is included in the fw package but cant be transfered to phone via fastboot. it stops at part 1/2 because the filesize allowd is around 470mb max but the extracted file has a size of 670. anyone know what to do?
Best regards
You need to go via the Rebrand way with no rebrand. I had the same problem and was trying to use the multitool without success. The oeminfo can be flashed alternatively if it fails during the HWOTA process.
https://forum.xda-developers.com/honor-9/help/how-flash-oeminfo-t3657499
ok i download all the folders with the .bat file. Then i download C432B150 from the czech site and add it to the update folder. Than i rename the 3 files accoding to the manual and run the .bat file but without rebranding right?
Des this tool any different than the HuaweiMultiTool or fastboot with flash command?
Best regards
I treid out HWOTA, the first step installing twrp is successful than i disattach usb cable as described and enter twrp. Then it says in twrp i have to connect again and press enter but then the bat file stops and doenst go on. i dont come to the point where i can choose rebrand or flash firmware.
Whats wrong here?
edit: i saw in the .sh file that the script executes wait_adb but my phone is not entering adb mode as it seems when in main screen of twrp. is this normal or do i have to set it manually in twrp
best regards
I was able to install the B130 now via 3 button recovery. Now im on B130 but cant update elsewhere. Also the 2 capacitive buttons are not working. Bootloader is locked again. Everything is stock and the phone runs great. When i update with the 3 buton method from external sd, which firmware should i use? i tried B150 full OTA but it aborts after 5% with an error. Do i only need to get a small OTA package now?
How can i put my cap. buttons back to work? Too bad only the 3 button method worked to recover the phone.
Best regards and many thanks.
I did the HWOTA with b120 firmware and then used firmware finder to update to b150.
The bug with capacitive buttons is present till Oreo. I use the home button gestures anyways.
Hope it helps.
ok, thats bad but they worked with the initial revision of b130 and b150 when i downloaded it OTA. Is this something like a fuse like.knox at samsung which happens at custom flashing?
Sent from my GT-I9300 using Tapatalk
the HWOTA method doesnt work, the batch file gets stuck after connecting the phone in twrp back to computer. in script it says wait_adb but it is not recognized somehow.
do u know a solution? anotherone here got that problem too.
im very afraid of that, i read here that everything related to twrp 3.1.1-0 and 3.1.1-1 is problematic a lot of people cant boot after installing twrp and can wipe whtever they want the phone never boots fully
whats the difference in the B130/B120 the phone came from huawei and the version flashed via tools? when i got it everything worked
i have this version.
ok so install twrp have frq and bootloader unlocked and then do backup out of recovery? with your file? can you provide download link? is this then a zip file?
I want to solve the thread and how i solved problem.
The B130 service firmware by huawei could be installed via 3 button method, than i was able to go up to the newest B180 via firmwarefinder and DNS method but with not working cap. buttons and flash etc.
Yesterday i installed TWRP 3.1.1-1(temporary) via HWOTA.zip method (ireplaced the older twrp in recovery folder) and successfully installed B120 and got the buttons etc working again. Then installed root and now system works fine and is rooted. My mistake was to install twrp over B130 or B150 which i downloaded OTA at the first day i got the phone. I tested this yesterday to install TWRP along with B150 and unlocked bootloader, infinite bootloop again. With B120 the TWRP 3.1.1-1 works out of the box without any loops.
The 2 trouble solvers where B130 service firmware and HWOTA with B120.
The external SD had to be inserted in card reader on PC because of the large filesize of the B130.
I would recommend to everyone before starting to play with the H9 to move the B130 folders to phone while it is still accessible. When everything bricks like in my case and u still have twrp than you can go to twrp main screen and connect phone to computer to rename the folder with B130 to "dload" and arrange update.app accordingly on PC or in TWRP file manager.
Can i set this topic to [SOLVED] myself?
Best regards
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892
this works flawlessly with 3 button method
hey! i accidentally deleted a backup for my device and now i have no system to boot off of
are there any roms available for mya-l11? all the ones i see on this sub are for the 2015 models. thanks
lbxda said:
hey! i accidentally deleted a backup for my device and now i have no system to boot off of
are there any roms available for mya-l11? all the ones i see on this sub are for the 2015 models. thanks
Click to expand...
Click to collapse
I could not find any custom Roms for your device.
I could find an stock Rom for the Mya-l41 trough.
Here is an link: https://mega.nz/#!wKpT1ZaS!CV-2E4sNnUwIurskAdqCDpDawWlZD2UeABtSELk_ffc
That should be an update.app or an flashable zip.
You may get Huawei Update Extractor and extract the system.img and boot.img of the update.app
After that flash system.img and boot.img from fastboot.
Warning. This may soft brick your device.
Good luck.
If i helped press the Thanks button
Thespartann said:
I could not find any custom Roms for your device.
I could find an stock Rom for the Mya-l41 trough.
That should be an update.app or an flashable zip.
You may get Huawei Update Extractor and extract the system.img and boot.img of the update.app
After that flash system.img and boot.img from fastboot.
Warning. This may soft brick your device.
Good luck.
If i helped press the Thanks button
Click to expand...
Click to collapse
i was able to flash the boot and recovery image, but i couldnt flash the system image
lbxda said:
i was able to flash the boot and recovery image, but i couldnt flash the system image
Click to expand...
Click to collapse
Does it show an error or anything?
Fastboot flash system system.img
ok, so i found what i thought was a stock rom for my device on some spanish forum and used sp flash tool to install it
problem is, sp flash tool formatted my phone, but encountered an error trying to install the firmware and now my phone wont boot and windows says its not recognised
is there any fix to this? or is my phone bricked?
hey again! i know this post has been a wild ride of me doing stupid stuff and bricking my phone, but i got the firmware back!
only catch is that i'm receiving some nvram error (which i got on my previous phone too. i swear this is the last time im going mediatek), so if anybody has a method that can fix this it'd be highly appreciated
thanks
Hi, Ibxda.
Can you please share with us where you found the stock rom, what went wrong with flashing, and how you managed to get the firmware back?
I have a running system, but I rooted it and cannot apply official upgrades. I'd like to go back, upgrade and root again. I would appreciate the info on your progress.
ifrag_svk said:
Hi, Ibxda.
Can you please share with us where you found the stock rom, what went wrong with flashing, and how you managed to get the firmware back?
I have a running system, but I rooted it and cannot apply official upgrades. I'd like to go back, upgrade and root again. I would appreciate the info on your progress.
Click to expand...
Click to collapse
You should root with Magisk, it's systemless and it should not affect updates. If you want to update you should flash stock recovery. After you updated you are free to flash Twrp again if you want. If you are rooted with SuperSU you should uninstall SuperSU and install Magisk
I got a 1.5mb update on my bla-L29 c420 version 150 and tried flashing it with huruupdater also using the old files from the proper update to 150 but it fails... Do I have to flash the stock firmware to update or is there an other way using twrp? There is only a small update.zip in the update folder
Thanks for help :fingers-crossed:
The problem leads to my phone beein stuck in erecovery sometimes as it trys flashing over night....
Ebrathul said:
I got a 1.5mb update on my bla-L29 c420 version 150 and tried flashing it with huruupdater also using the old files from the proper update to 150 but it fails... Do I have to flash the stock firmware to update or is there an other way using twrp? There is only a small update.zip in the update folder
Thanks for help :fingers-crossed:
The problem leads to my phone beein stuck in erecovery sometimes as it trys flashing over night....
Click to expand...
Click to collapse
You need stock recovery.
You can do this in TWRP terminal:
dd if=/dev/block/bootdevice/by-name/erecovery_ramdisk of=/dev/block/bootdevice/by-name/recovery_ramdisk
This will copy eRecoverys ramdisk to recoverys ramdisk, and give you back stock recovery.
Though if you have Magisk you'd have to reinstall it after that patch as it won't boot with DM-Verity disabled.
You can also fix this from terminal:
echo "KEEPVERITY=true" > /data/.magisk
Then reinstall Magisk.
Thank you very much for answering fast and precise
so my xiaomi mi a3 have been having random restarts and now it only shows
“Can’t Load Android System Your Data May Be Corrupt”on the boot up screen. recovery mode is still available so i humbly ask if any of you have the V12.0.26.0.RFQMIXM OTA zip file i can use in ADB. would also ask if when i run that zip file i get to recover my beloved files. i don't want to factory reset yet without recovering my files. so yea i hope someone would help. the official roms are always unavailable.
Here, you can download V12.0.26.0.RFQMIXM https://xiaomifirmwareupdater.com/miui/laurel/stable/V12.0.26.0.RFQMIXM/
Type: Fastboot, worked for me without problems.
i've tried this already but the .tgz file wont come through.. i tried converting it to a zip file and didnt work too. so i'm just looking for the 10 mb OTA update. hope you can help me again. thanks for the help though.