{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
If you get bootloop click here
Summary CrazySuperKernel is a powerfull kernel with a lot super features!
If you got any bug use the report bug tab or press HERE and upload the log,WITHOUT LOGS THERE IS NO BUG!
I m not a magician and i havn't got the device to do it on my own without spend your time.
INDEX
POST 1
-Imprtant info
-Report bug with Logs
-Features
-Battery life tips
-Dowload links
-Donators
-Credits
POST 2
-Recommended kernel tweaker tools
-Changelogs
POST 3
-Bootloop fix
POST 4
-Zzmoove profiles
POST 5
-Eta info
Features
- OTA Updates from Kernel Adiutor app
- Anykernel2 zip For maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
- Synapse Support - Complete Kernel Control!! (UKM included!Just need to instal Synapse app from Play Store)
- Compiled with DF 4.9 Toolchain [latest update]
- Kernel runs with SELinux enforcing by default
- init.d support
- insecure kernel (adb has root privileges)
- Faux sound control
- Frandom support
- gpu governor selection support
- CPU governors : interactive, impulse, ondemand, smartmax, zzmoove,ondemandplus,pegasusq,nightmare,conservative,lionheart,powersave,userspace,yankactive,smartmax_eps,intellidemand,intelliactive
- IO schedulers :bfq-tripndroid-cfq-noop-deadline-fiops-row-sio-zen-vr-fifo
- TCP congestion controls: cubic-bic-westwood-htcp-highspeed-hybla-reno-bic-hybla-vegas-lp-yeah-illinois-scalable
- Gpu governors :msm-adreno-tz,simple_ondemand,powersave,performance,userspace,cpubw_hwmon,msm_cpufreq
- Kcal v2 with inverted colours
- Intelli thermal v2
- Bricked Hotplug
- Adreno idler
- Fast charge support (by yank555)
- LED extended control (by yank555)
- Prevent wakelock when ambiend display disabled(misc control tab)
- Wake And Sleep Functions
- CPU Voltage Control
- Slimbus overclock
- Enabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Android Logging switcher
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- QuickWakeUP
- Dynamic FSync 2.0
- Fixed recent SafetyNet failure,you can use Android Pay again (thx Sultanxda)
- tcp congestion changed to Westwood
- A lot improvments
- A lot fixes
Battery life improve tips:
Xposed needed(not for all steps)
-Amplify
-AppOpsXposed(disable wakelocks of Google apps)
-Greenifywith root mode and xposed better and aggresive doze
-Find the best hotplug for you
-The best governor for you
- Bfq sheduler recomended
-Adreno idler on
-Lower Gpu as low as you can(if not use it much)
-underclock max cpu close to 1.5ghz for beast battery life and 1.7 to 1.9 for better smoothness(lower cpu freq=lower temps so better exp)
-disable some boosts like touchboost(no big deal)
-disable ambient display
-use dark themes
-more coming soon
Find this thread helpful? Hit the Thanks button!
The speed of future releases will be based on thanks. 39k views, 400 downloads and only 19 thanks... I won't be rushing anything.
Feeling extra generous and wanna help me more? Click my name at the top of any post and hit donate or click here the donation button
Download Link [AnyKernel]:https://www.androidfilehost.com/?fid=673368273298915721
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Donators
DirkStorck
SilentEYE
Credits
- Thx the devs where created the features where included in kernel
- Thx TioCareca for the tests
- Thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazySuperKernel, Kernel for the Samsung Galaxy S 5
Contributors
CrazyGamerGR
Source Code CrazySuperKernel: https://github.com/CrazyGamerGR/CrazySuperKernel-CM13-KLTE
Source code CrazySuperKernel-AnyKernel2:https://github.com/CrazyGamerGR/CrazySuperKernel-KLTE-anykernel2
Kernel Special Features: check the feature list
Version Information
Status: Testing
Current Stable Version: Weekly
Stable Release Date: 2016-12-09
Current Beta Version: Daily
Beta Release Date: 2016-12-09
Created 2016-04-04
Last Updated 2016-12-09
FAQ
Recommended apps : Synapse Support - Complete Kernel Control (need download the app from Play Store) & Kernel Adiutor (with kernel ota updates!) + Kernel Adiutor mod with much more features builded from source by TioCareca (Download Link: https://mega.nz/#!1ZVDQIgL!bHBvHC9AYMCDM4h7w50rjGzFnsiZfxtYUPOw5gbvecM)
changelogs
v1/02-04-16
- compiling bugs and bootloops fix
v2/04-04-16
- initial release
v3/05-04-16
- fixes
v4/14-04-16
- fixes
v5/07-05-16
- last fixes to bootup
v6/10-05-16
- builded from scratch and clean up my features
- updated ramdisk (10-05-16)
- added adreno idler
v7/12-05-16
- upstream updates from cyanogenmod
- update ramdisk (12-05-06)
- added intelli thermal v2
- added cpu oc
- added gpu oc
- added gpu idle step 27mhz
v8/12-05-16
- removed cpu oc
- removed gup oc
- removed gpu idle step 27mhz
v9/17-05-16
- upstream updates from cyanogenmod
- update cm/rr ramdisks (16-05-06/15-05-16)
- added cpu oc
- added gup oc
- added gpu idle step 27mhz
v10/23-05-16
- update cm/rr ramdisks (22-05-06/21-05-16)
- removed cpu oc
- removed gup oc
- removed gpu idle step 27mhz
- added many features
- added many govs
- added many scheds
- added tcp controllers
- added many hotplugs
- added many under the hood tweaks
- added wake/sleep functions
- added cpu voltage control
v11/25-05-16
- upstream updates from cyanogenmod
- update cm/rr ramdisks (24-05-06/21-05-16)
- update toolchain to UBERTC 4.9
- ota updates from KernelAdiutor app
v12/28-05-16
- Anykernel zip( need to instal your rom first to have the latest ramdisk!)
- removed franco sound
- added faux sound
- added dynamic filesystem read-ahead
- added tripndroid scheduler
v1.0/28-05-16
- Synapse Support - Complete Kernel Control!!
- upstream updates from cyanogenmod
- Anykernel update
- removed 268mhz cpu underclock step
- clean up some files
v2.0/15-06-16
- upstream updates from cyanogenmod
- Anykernel update
- clean up some files
v3.0/25-06-16
- upstream updates from cyanogenmod
- bug fixes
v4.0/08-07-16
- upstream updates from cyanogenmod
- many bug fixes
- Anykernel update
v5.0/15-07-16
- upstream updates from cyanogenmod
- Anykernel update
v6.0/19-07-16
- upstream updates from cyanogenmod
- Anykernel update
v7.0/25-08-16
- upstream updates from cyanogenmod
- Anykernel update
v8.0/25-09-16
- upstream updates from cyanogenmod
- Anykernel update
- changed to DF 4.9 Toolchain
v9.0/04-11-16
- upstream updates from cyanogenmod
- Anykernel update
- deleted many hotplugs
v10.0/10-11-16
- upstream updates from cyanogenmod
- Anykernel update
- removed slim governor
- removed intellimm governor
v11.0/10-11-16
- removed many unstable governors
- clean up some files
- bug fixes
v12.0/11-11-16
- fixed recent SafetyNet failure,you can use Android Pay again (thx Sultanxda)
- Anykernel update
- Anykernel clean up
v13.0/13-11-16
- many fixes under the hood
v14.0/14-11-16
- big anykernel update
-removed uksm (battery drain fixed)
-insecure kernel (adb has root privileges)
-init.d support
-simple ondemand gpu governor update
-msm adreno tz governor update
-tap2wake update
-kcal update
-touch boost update
-cpu boost update
-touchkey control update
-conservative gpu gov removed
-some fixes
-some useless features removed
v15.0/18-11-16
- upstream updates from cyanogenmod
v16.0/9-12-16
- anykernel big updates
- upstream updates from cyanogenmod
- disabled completly mpdecision
- enabled updated bricked hotplug
- script with many set up for kernel features included in anykernel zip
- added led tab in synapse
- fixed many synapse bugs
- faux sound updated
- deleted unstable hotplugs
- fixed many bugs
- battery improve
- performance improve
- some feature fixed
- many improvments under the hood
How to fix if you get bootloop!
If you get bootloop or bootloop before samsung screen press volume up+down+power button until device vibrate and fast press power+volume up and device will be boot in recovery,instal your rom(dirty instal not need clean instal) and everything will be good^^.
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
Zzmove profiles
1 ) Default -> will set governor defaults -
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended! -
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving -
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving -
- DEV-NOTE: might give some lags! -
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting -
- DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction -
- DEV-NOTE: relict from back in the days, even though some people still like it! -
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online -
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast -
- down scaling/hotplugging behaving -
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience! -
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay -
Eta info
Nightlies : when cm got new updates
Stable builds: when i have enough free time and some new features
Cm source commit history : https://github.com/CyanogenMod/android_kernel_samsung_klte/commits/cm-13.0
CrazySuperKernel commit history : https://github.com/FrancescoCG/CrazySuperKernel-CM13-KLTE/commits/master
If there are updated commits in cm sources there will be a new nightly very soon
For the stable and big updates i ll say when i ll start them
OOOOOOH a new post hahaha. IM ready to try it! I will be the first one! LOL . will download it right now and will be back in 7 to 10 minutes. If bootloop, in less than that. Wait. it says LP instead of MM. Is it for both?
Removed the link?
Sent from my SM-G900F using Tapatalk
joseguillen1994 said:
OOOOOOH a new post hahaha. IM ready to try it! I will be the first one! LOL . will download it right now and will be back in 7 to 10 minutes. If bootloop, in less than that. Wait. it says LP instead of MM. Is it for both?
Click to expand...
Click to collapse
Only main download link work ,mirrors will be come for weekly builds only so androidfilehost include the new builds.But Basketbuild mirror download zip is up too now^^.
Sent from my Nexus 5X using XDA-Developers mobile app
!crazy said:
Removed the link?
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
No,now its up in mirror too you can download from androidfilehost or basketbuild.
Sent from my Nexus 5X using XDA-Developers mobile app
CrazyGamerGR said:
Only main download link work ,mirrors will be come for weekly builds only so androidfilehost include the new builds.But Basketbuild mirror download zip is up too now^^.
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
aaaaaaaaaaaaaaaaaaaaaaaaaaaaand EPIC FAIL! lol Bootloop.. If VRtoxin where working appropriately i could use that rom and boeffla kernel made for that rom. But instead here i am using Resurrection Remix, with a kernel that is draining my battery life like crazy ! I have tried every single governor and the best one for this rom is powersaver, which is aweful since everthing becomes as slow as a snail. however, i havent try this kernel in other roms. As soon as blisspop add more futures, or AICP, or AOKP, then i will flash them and add this kernel to see if it works
joseguillen1994 said:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaand EPIC FAIL! lol Bootloop.. If VRtoxin where working appropriately i could use that rom and boeffla kernel made for that rom. But instead here i am using Resurrection Remix, with a kernel that is draining my battery life like crazy ! I have tried every single governor and the best one for this rom is powersaver, which is aweful since everthing becomes as slow as a snail. however, i havent try this kernel in other roms. As soon as blisspop add more futures, or AICP, or AOKP, then i will flash them and add this kernel to see if it works
Click to expand...
Click to collapse
For some ppl working this kernel,what variant have you got? g900f,g900m?
Sent from my Nexus 5X using XDA-Developers mobile app
CrazyGamerGR said:
For some ppl working this kernel,what variant have you got? g900f,g900m?
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
seems like tmobiles version (g900t) is being stubborn lol
joseguillen1994 said:
seems like tmobiles version (g900t) is being stubborn lol
Click to expand...
Click to collapse
Its different variant i belive not much in source but ramdisk for sure.
Sent from my Nexus 5X using XDA-Developers mobile app
The rom boot for g900f users yeh??
Sent from my Nexus 5X using XDA-Developers mobile app
CrazyGamerGR said:
The rom boot for g900f users yeh??
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
For me still didn't boot
dawid0089 said:
For me still didn't boot
Click to expand...
Click to collapse
I ll release a new build with not so much features at start.
Sent from my Nexus 5X using XDA-Developers mobile app
I ll add one by one feature from clean and with gcc 4.7 to be everything clean.
Sent from my Nexus 5X using XDA-Developers mobile app
dawid0089 said:
For me still didn't boot
Click to expand...
Click to collapse
You use xposed?
Sent from my Nexus 5X using XDA-Developers mobile app
new build is here with 268mhz underclock step and gcc4.7 to check if boot.
download here: https://www.androidfilehost.com/?fid=24459283995313757
test build with 4.8 gcc is here https://www.androidfilehost.com/?fid=24459283995314243
Related
Kx Kernel - V2.5 Released
ROM - V2.5 Released
Kernel Information
Compilation
OFast/Graphite with UBERTC-4.9.4 (GCC 4.9.4 20150720) with lots of compilation optimizations and AnyKernel2 support.
CPU
- Complete "per core control" - CPU frequencies, Governors, CPU Boost
- MSM_Limiter (per core control)
- Hotplugs: Latest and greatest: AutoSMP, Bricked hotplug, MSM hotplug, Intelliplug hotplug and Alucard
- CPU Governors: Latests and greatests - Slim, SmartMax, Alucard 2.1, IntelliMM, ElementalX, ZZMoove 1.0beta7, Yankactive and IntelliActive.
- CPU Governors: Latest patches for Interactive.
- Voltage control
- Power Efficient WorkQueues
- CPUBoost: Add hotplug and Wakeup Boost and add latest patches and ability to disable from Synapse
- Additional Over Clock steps - 2342, 2419, 2457 Mhz
- Additional Lower Clock steps - 96Mhz, 146.4Mhz, 223.3Mhz.
- 300Mhz step is 268 Mhz
- PVS and Speed Level exposed using Synapse
GPU
- Simple GPU Algorithm (Add on for msm-adreno-tz by faux)
- Andreno-tz fine-tuning from Synapse
- Under clocked steps (27 and 80MHz). Choose minimum frequency and the GPU should idle at one step below it.
- Over clocked steps 487.5 and 515 MHz
- More GPU governors (and upstream fixes/patches to existing ones) [Don't use cpubw_hwmon as it crashes because of additional frequency steps)
- Latest upstream patches for devfreq, kgsl, ion.
Battery /Tweaks
- Powersuspend, State_Notifier, LCD_Notify
- Fast charge
- Arch power and Gentle fair sleepers
- Disable TZ logs
- Disable CRC
- ZRAM
- Permissive SELinux
- Disable samsung and other debugging logs
Thermal
- FranciscoFranco's thermal driver is default (Configurable through Synapse)
- Slightly aggressive thermal settings (benchmarks friendly)
IO
- IO Schedulers: Latest and greates - TripNDroid, ZEN (v2), SIOPlus, SIO, VR
- F2FS support
- Upgrade BFQ from 7r5 to 7r8
- Dynamic Fsync
- Async Fsync
- Fsync Enable/Disable (If this is disabled Dynamic Fsync is also disabled)
- Upstream patches to IO layer
- CFQ tuning (from AK kernel)
- Tweak mount options for all partitions
- Reduce swappiness to 10
Sound
- franco sound control
Display
- KCal
Net
- Enable various other TCP Congestion protocols - westwood (default), reno, bic, highspeed, hybla, htcp, vegas, veno, scalable, lp, yeah, illinois
- Tweak receive window size
Synapse / UKM
- Lot of tweaks and extra options
Install notes
- ROM and Kernel and both based on CM12.1 branches. Can be dirty flashed over CM12.1 nightlies and vice-versa.
- Anykernel version can be used with other ROMs like Slim etc.
- Kernel configuration are only supported through Synapse and custom UKM build.
- Install Kernel and UKM zips through recovery
- Install Synapse tool from Playstore
- Whenever new major features are added, you may need to install UKM zip again for new bells and whistles to appear in Synapse.
ROM Information
Compilation
CM12.1 branches (5.1.1_r18) compiled wih UBERTC-4.9.4 (GCC 4.9.4 20150720) with O3/Graphite and lots of compilation optimizations
Features
- Capacitive buttons should not glow on touching screen.
- Slim Recents
- Add wakelock blocker from LiquidSmooth project / Bliss
- Add Per-Core overlay indicator on frequency / governor (includes GPU clock as well). Please change SELinux status from "Enforcing" to "Permissive" to get temperature readings in CPU overlay
- Add network traffic speed indicators to status bar (Settings -> Statusbar)
- Add option to configure MediaScanner behavior on boot (Settings -> Storage)
- Tweak default hosts file to be an awesome ad-blocker OOTB
- Includes latest Kx kernel and CM 12.1 sources
Downloads
Kernel - v2.5 - V2.5-KxKernel-SMT320.zip 23rd Sep
Kernel + UKM - v2.5 (Anykernel) - V2.5-KxKernel_AnyKernel-SMT320 23rd Sep
ROM - v2.5 - V2.5_cm-12.1-20150923-UBERTC-KxKernel-mondrianwifi 23rd Sep
UKM - UKM_KxKernel_3.8.1.2.zip 29/05
Gapps - Slim Zero Gapps
Old versions - Google drive directory
XDA:DevDB Information
Kx Kernel and ROM[SM-T320][ANYKERNEL][UKM][5.1.1][UBER][JUSTARCHI]CM12.1 [22 Sep], Kernel for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
vikrant82
Source Code: https://github.com/vikrant82/android_kernel_samsung_mondrianwifi
Kernel Special Features:
Version Information
Status: No Longer Updated
Created 2015-05-24
Last Updated 2016-02-26
Some feature specific details -
ZZmoove
Profiles - Change profile_number in governor tunable to one of below:
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (1)'def' -> Default -> will set governor defaults -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (2)'ybat -> Yank Battery -> a very good battery/performance balanced setting -
* - DEV-NOTE: highly recommended! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (3)'ybatext'-> Yank Battery Extreme -> like yank battery but focus on battery saving -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (4)'zzbat' -> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving -
* - DEV-NOTE: might give some lags! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (5)'zzbatp' -> ZaneZam Battery Plus -> NEW! reworked 'faster' battery setting -
* - DEV-NOTE: recommended too! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (6)'zzopt' -> ZaneZam Optimized -> balanced setting with no focus in any direction -
* - DEV-NOTE: relict from back in the days, even though some people still like it! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (7)'zzmod' -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (8)'zzperf' -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast -
* - down scaling/hotplugging behaving -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (9)'zzinz' -> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (10)'zzgame' -> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (11)'zzrelax'-> ZaneZam Relax -> NEW! based on moderate (except hotplug settings) with relaxed sleep settings -
* ------------------------------------------------------------------------------------------------------------------------------------------
- How do I killall apps using SlimRecents
Pinch in in the recents area to close all apps.
- Never enable more than one hotplug.
- GCC compiler optimizations - http://www.phoronix.com/scan.php?page=article&item=gcc_49_optimizations&num=1
- From V2.2 we have switched to Justarchi 4.1 compiler optimizations.. More details - http://forum.xda-developers.com/showthread.php?t=2754997
-More on our thermal driver:
It comes into action as soon as trigger temperature is reached. In our case I have configured it as 75. But you can change it in Synapse / Kernel adiutor.
Once triggered it throttles the CPU to following frequencies based on current temperature as shown below:
enum thermal_freqs {
FREQ_HELL = 729600, //(91 and above)
FREQ_VERY_HOT = 1036800, //(83 to 91)
FREQ_HOT = 1574400, //(78 to 83)
FREQ_WARM = 1958400 //(75 to 78)
};
So feel free to set it to 60 for a throttled but cooler device. OR set it to 80 for >=950 on geekbench3.
Changelogs
-== 02/7/15 ==-
KERNEL 1.8
- Revisit kernel build flags
- Add slim cpu governor (I use it a lot on my Oneplus, smooth and battery friendly)
- Alucard hotplug: More attempts at stability
- Enable ZRAM (To be enabled/configured in Syanpse. Some folk had memory issues?)
- SIOPLUS and ZEN - "set fifo batch to 16 to reduce overload on eMMC and CPU."
- SELinux is now defaulted to Permissive
- Readahead: Optimize divide/multiply by power of 2 using L/R shift
- Disable truck load of debugging in logs (sumsung debuggers etc)
ROM 1.8
- Slim Recents
- Upstream CM12.1
-== 22/6/15 ==-
V1.7
http://forum.xda-developers.com/showpost.php?p=61473635&postcount=129
-== 16/6/15 ==-
http://forum.xda-developers.com/showpost.php?p=61366739&postcount=113
V1.6 Kernel
- GPU overclocks [Can't set to stock by default. Reduce max clock from synapse]
- Upgrade BFQ
- Upgrade alucard
- Upgrade zzmoove (and is no default)
- frandom
Details:
Code:
93a865e GPU: Fix unused highest level
9da20be Revert "msm: kgsl: set the correct max_state"
d8f55de char: frandom: initial commit v1.1
4d61961 Revert "msm: lpm-levels: add suspend_again handler"
944a143 msm: lpm-levels: add suspend_again handler
6e5a6e4 block: Update from BFQ-v7r7 for 3.4.0 to BFQ-v7r8 for 3.4.0
e74be7f Bring back GPU OC. Default should start at stock. Let users OC.
e7c020b Logger compile issue
c122f37 Logger compile issue
e91ca38 alucard cpu governor: set min max frequency limits during governor start and when policy changes its limits! Thanks to @shminer
26209bc logger: Add sys kernel interface to configure android logcat
2a23943 cpufreq: Update to zzmoove 1.0-beta7a governor (bugfix)
d028101 Disable sweep2wake for now
V1.6 ROM
- CM upstream changes
-== 7/6/15 ==-
Kernel 1.5
- Lower freqency steps - 96Mhz, 146.4Mhz, 223.3Mhz.
- Upstream patches to mm - See this
ROM 1.5
- Upstream merged upto 20150607
-== 4/6/15 ==-
Kernel 1.4
- Fix intelliactive (scaling was getting stuck)
- Add zzMoove governor
- Calm down GPU.
- GPU upstream patches and fixes (See http://forum.xda-developers.com/showpost.php?p=61158420&postcount=78)
-== 2/6/15 ==-
Kernel V1.31
- Optimized defaults
- Try to disable OC frequencies on boot and across various governors / hotplugs
- Disable overclocks during boot / governor intialization (possible fix for after-boot SOD)
- Disable OC for PVS and SPEED <=1
- This build also attempts S2W, D2W but they doesn't work yet. (Enabled in Synapse but needs further adaptations). This one is tricky.
ROM 1.3
- Add network traffic speed indicators to status bar (with color support) (Settings -> Statusbar)
- Add option to configure MediaScanner behavior on boot (Settings -> Storage)
- Add color picker support
- MediaScanner optimizations
- Latest CM12.1
-== 29/5/15 ==-
Kernel V1.2
Kernel: Introduce ElementalX governor (Performance centric)
Kernel: Tune lots of default settings for governors / hotplugs / IO etc (Details see github 29th May)
Kernel: By default stock frequencies (but you can overclock)
UKM: Need new UKM - 3.8.1.2 to configure some new stuff in Alucard.
-== 28/5/15 ==-
Kernel V1.1
Kernel: KCAL
Kernel: Alucard / AutoSMP hotplugs tuning
Kernel: CPUBoost - Enable wakeup boost by default
Kernel: Swappiness from 60 to 10 by default
ROM V1.2
ROM: Sync with CM12.1 28/05 Nightly
ROM: Inbuilt adblocking (/etc/hosts replaced with a super blocking version)
ROM: Default governor / hotplug - Alucard / Alucard
ROM: Default frequency - 2265 (prevent overheating etc)
-== 27/5/15 ==-
ROM: Sync with CM12.1
ROM: Add wakelock blocker from LiquidSmooth project / Bliss
ROM: Add a supercharged version of "hosts" for ad blocking
Thanks!! Downloading now!
@vikrant82 sweet kernel will report back sooon!!! kernel is packed full of goodies
b3ltazar said:
@vikrant82 sweet kernel will report back sooon!!! kernel is packed full of goodies
Click to expand...
Click to collapse
Thanks! I thouhgt the first few builds should have maximum options so that we can get a feeling on what combinations work best. So, I am sure some of the default values will need to be optimized as we go along. For eg. I have let the thermal driver be be slightly aggressive (for performance/benchmarks). Feel free to tweak and report back what works best for you.
I am currently rocking the Alucard and AutoSMP combination (liking them as surprisingly calm cores and still around 3100 on geekbench3)
Show CPU Info
Updated the ROM zip with a nifty feature in Developer Options called "Show CPU Info". This will basically show a small overlay at top right on current core frequencies, governors and overall temperature. Very useful since we have Per-Core control. See top right on screenshot."
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT: Temperature reading seems to be broken (will show as 0). Will be fixed in next build. Also currently porting "Wakelock blocker" from Blisspop ROM. Also feel free to make feature requests in the feature requests tab.
vikrant82 said:
Updated the ROM zip with a nifty feature in Developer Options called "Show CPU Info". This will basically show a small overlay at top right on current core frequencies, governors and overall temperature. Very useful since we have Per-Core control. See top right on screenshot."
EDIT: Temperature reading seems to be broken (will show as 0). Will be fixed in next build. Also currently porting "Wakelock blocker" from Blisspop ROM. Also feel free to make feature requests in the feature requests tab.
Click to expand...
Click to collapse
how bout Kcal? is it possible for tab pro?
http://forum.xda-developers.com/android/software-hacking/dev-kcal-advanced-color-control-t3032080
ngoralph said:
how bout Kcal? is it possible for tab pro?
http://forum.xda-developers.com/android/software-hacking/dev-kcal-advanced-color-control-t3032080
Click to expand...
Click to collapse
Thanks for the link. Will give it a try.
Can I use this kernal with Resurrection Remix ROM?
Hi. Thanks for posting this - I'm exited to try it.
I apologize if this question seems really basic, but can I use this kernal with the above ROM? I'm pretty happy with it and do not necessarily want to change it, but I would like to try a new kernal.
Thanks in advance for any assistance!
This is for cm 12.1 on the tab pro 8.4 WiFi version.
Sent from my SGH-M919 using XDA Free mobile app
ajisom said:
Hi. Thanks for posting this - I'm exited to try it.
I apologize if this question seems really basic, but can I use this kernal with the above ROM? I'm pretty happy with it and do not necessarily want to change it, but I would like to try a new kernal.
Thanks in advance for any assistance!
Click to expand...
Click to collapse
Since that rom is using same device tree, I won't be surprised if it works. No harm trying. You can always dirty flash the ROM if it doesn't work.
ROM v1.1 CM12.1 20150527 uploaded
Changelog:
ROM: Sync with CM12.1 - 20150527
ROM: Add wakelock blocker from LiquidSmooth project / Bliss
Includes V1 kernel. Introducing - The Wakelock Blocker: Found in developer settings. A powerful tool for saving battery by blocking common system level wakelocks. It starts where "Privacy Guard" stops.
Will this work with the Revolution Remix or other custom 5.1.1 ROMs?
Cheers,
Rich
ajisom said:
Hi. Thanks for posting this - I'm exited to try it.
I apologize if this question seems really basic, but can I use this kernal with the above ROM? I'm pretty happy with it and do not necessarily want to change it, but I would like to try a new kernal.
Thanks in advance for any assistance!
Click to expand...
Click to collapse
Yes you can
Black screen of death on 5/26 Nightly after flashing V1 kernel. My SM-T320 is not recognizing charger or force rebooting into recovery or download mode
---------- Post added 27th May 2015 at 12:01 AM ---------- Previous post was 26th May 2015 at 11:55 PM ----------
Finally got it to boot using adb... Sketched me out there for a second.
---------- Post added at 12:07 AM ---------- Previous post was at 12:01 AM ----------
Still crashing at ”Starting Apps”. Screen freezes, then goes blue, then black screen of death.
Had to Odin back to stock, then reroot. Was able to access download mode but not recovery mode. Be cautious!
Much appreciated
b3ltazar said:
Yes you can
Click to expand...
Click to collapse
Thanks, much.
Any special steps I should take? Clear the cache or anything? Do I need to reflash the ROM after flashing the kernal?
---------- Post added at 02:16 PM ---------- Previous post was at 01:55 PM ----------
vikrant82 said:
Since that rom is using same device tree, I won't be surprised if it works. No harm trying. You can always dirty flash the ROM if it doesn't work.
Click to expand...
Click to collapse
OK, cool. Thanks!:good:
norcalsfinest said:
Black screen of death on 5/26 Nightly after flashing V1 kernel. My SM-T320 is not recognizing charger or force rebooting into recovery or download mode
---------- Post added 27th May 2015 at 12:01 AM ---------- Previous post was 26th May 2015 at 11:55 PM ----------
Finally got it to boot using adb... Sketched me out there for a second.
---------- Post added at 12:07 AM ---------- Previous post was at 12:01 AM ----------
Still crashing at ”Starting Apps”. Screen freezes, then goes blue, then black screen of death.
Click to expand...
Click to collapse
What was the name of zip file that you installed ? After installing the ROM zip there's no need of installing Kernel specifically as the ROM includes latest kernel.
What was the version / ROM you installed upon ? Dirty flashed ? I installed cm-12.1-20150527-UBERTC-KxKernel-mondrianwifi_1.1.zip over last version which was 20150524 and faced no issues. I did't install kernel though.
Edit: Well I have tried all combinations of last 2 ROMs and V1 kernel. No issues here. So:
1. What version you upgraded from ?
2. What's the exact size and name of zip you installed ?
ajisom said:
Thanks, much.
Any special steps I should take? Clear the cache or anything? Do I need to reflash the ROM after flashing the kernal?
---------- Post added at 02:16 PM ---------- Previous post was at 01:55 PM ----------
OK, cool. Thanks!:good:
Click to expand...
Click to collapse
Generally ROM includes a kernel. So if you flash ROM after flashing Kernel - The kernel is overwritten.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Summary CrazyKernel1 is based on GoogyMax4 Kernel but i changed a lot of features and added too!
Features
- CM12.1 ramdisk(25-8-15)
- Patched to Linux 3.4.108
- Compiled with latest Christopher's latest linaro gcc 4.9.4 optimized for Cortex A15 /15-7-15
- fauxsound
- Logger switchable
- msm Thermal v2
- frandom support
- SELinux set to permissive
- CPU governors : interactive, impulse, ondemand, smartmax, zzmoove, intellimm,ondemandplus,pegasusq,nightmare,conservative,lionheart,powersave,userspace,yankactive,smartmax_eps,optimax
- IO schedulers : cfq-noop-deadline-tripandroid-fiops-row-sio-zen-vr-fifo
- TCP congestion controls: cubic-bic-westwood-htcp-highspeed-hybla
- cpu oc up to 2,84ghz
- gpu oc up to 657mhz
- gpu idle step 27mhz
- kcal v2 with inverted colours
- intelli plug hotplug
- workqueues for better battery life
- Screen wake and sleep functions
- force fast charge
- Compiled with gcc optimization flags
- LED extended control (by yank555)
- arch power (enabled by default)
- sched autogroup(disabled by default
- a lot power efficiency patches
- prevent wakelock when ambiend display disabled(misc control tab)
- a lot improvments
- a lot fixes
Download Link:http://crazytechblog.blogspot.gr/2015/09/kernelcm121crazy-kernel1-v1125-8.html
Installation guide
Download Kernel - Flash it with Recovery
{Wipe cache and Dalvik cache recommended}
Then Reboot .
Enjoy !!
Credits
Thx Lord Boeffla - for his awesome help
Thx googy_anas ofc - for his amazing work
Thx CrazyGamerGR - yeh me
XDA:DevDB Information
CrazyProject, Kernel for the Samsung Galaxy S 5
Contributors
CrazyGamerGR, googy_anas
Source Code: https://github.com/CrazyGamerGR/Crazy-Kernel1-CM-Kernel
Kernel Special Features: Linaro 4.9.4
Version Information
Status: Stable
Beta Release Date: Daily
Created 2015-08-08
Last Updated 2015-08-25
Changelogs and FAQ
FAQ
Recommended app : Kernel Adiutor
changelogs
v1/8-8-15
- test build(w/o release)
v2/8-8-15
- initial release
v3/11-8-15
- fixed stweaks finaly
v4/12-8-15
- patched to 3.4.108
v5a/14-8-15
- added lionheart
- added pegasusq
- added ondemandplus
- added yankactive(not enabled atm)
- added tripandroid sheduler
- stweak update(with oc and much more govs like conservative performance etc...etc...)
- cpu oc up to 2,84ghz
- gpu oc up to 657
- gpu idle step 27mhz
- a lot of imvprovments
- a lot of fixes
v5b/15-8-15
- renamed project but continue based on googymax4 kernel
- updated ramdisk
v6/16-8-15
- added smartmax_eps governor
- added yankactive governor
- added kcal v2 with inverted colours
- etc...etc...
v7/20-8-15
- added intelli plug hotplug
- fixed a typo step bug in stweaks
- a lot of improvmets
- etc...etc...
v8/21-8-15
- stweaks removed (we lost some switchable features like arch switch and led control)
- fauxsound added coz to use it with kernel adiutor(imo a little bugged but i ll try add franco sound)
- added optimax governor
- deleted boeffla sound
- deleted fast charge control
v9/22-8-15
- test release(w/o release)
v10a/23-8-15
- Screen wake and sleep functions
- force fast charge
- voltage control
- Compiled with gcc optimization flags
- LED extended control (by yank555)
- arch power (enabled by default)
- sched autogroup(disabled by default)
- a lot improvment
v10b/23-8-15
-voltage control removed(not reset default after reboot if cpu tab is set on boot)
v10c/23-8-15
- fixed wrong name after some changes
- disabled test io scheduler
- a little clean up the code
v11/25-8-15
- updated ramdisk(25-8-15)
- a lot power efficiency patches
- prevent wakelock when ambiend display disabled(misc control tab)
- readded vr scheduler
- readded fifo scheduler
- fixed some derps
ATTENTION!!!
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
Zzmove profiles
1 ) Default -> will set governor defaults -
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended! -
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving -
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving -
- DEV-NOTE: might give some lags! -
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting -
- DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction -
- DEV-NOTE: relict from back in the days, even though some people still like it! -
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online -
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast -
- down scaling/hotplugging behaving -
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience! -
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay -
-Soon more-
Hi this kernel is only for cm12.1 or it will work with TW roms?
radekg7 said:
Hi this kernel is only for cm12.1 or it will work with TW roms?
Click to expand...
Click to collapse
Only cm12.1 atm m8,maybe soon i ll release a tw kernel
Any chance of supporting Sprint? I love this kernel
mikshepard said:
Any chance of supporting Sprint? I love this kernel
Click to expand...
Click to collapse
Maybe soon but now i m learning for kernel building and its a little difficult for me and 1st of all i need to fix stweaks
will try this and update on performance soon. .
on a side note, how do you change zzmoove profiles?
using kernel adiutor but there is no such option to change zzmoove profile.
squid93 said:
will try this and update on performance soon. .
on a side note, how do you change zzmoove profiles?
using kernel adiutor but there is no such option to change zzmoove profile.
Click to expand...
Click to collapse
There is option in tunable under governor there is an option profile number and u write there the number,when u add it up from it it saw you what profile u applied^^
Finaly i fixed stweaks but i m really not sure if fast charge work(i belive its useless imo but anyway i wanna continiue this kernel with its features)i must check the changes 1by1 for fast charge
CrazyGamerGR said:
There is option in tunable under governor there is an option profile number and u write there the number,when u add it up from it it saw you what profile u applied^^
Click to expand...
Click to collapse
Ah..
Makes sense now.
Thanks!!
Got it to work now.
Update: I patched to 3.4.108 after a whole night tests i dont know if its fully patched i revert the 3.4.106- 2directories to fix the compile errors the most its patched ^^ its crazy smooth ,tommorow i ll start cherry picking but i need to work on github( i m so noob with github)
CrazyGamerGR said:
Update: I patched to 3.4.108 after a whole night tests i dont know if its fully patched i revert the 3.4.106- 2directories to fix the compile errors the most its patched ^^ its crazy smooth ,tommorow i ll start cherry picking but i need to work on github( i m so noob with github)
Click to expand...
Click to collapse
sweet..
trying out this update.
:laugh::laugh::laugh:
Github is updated too ,all 3.4.108 changes are a lot...thats good
I tried add gpu control panel in stweaks but i faild imo its better use kernel adiutor or any other kernel setting app,i added and yankactive but i wanna start from scratch(v4) for cleaner buuld
Στάλθηκε από το LG-D855 μου χρησιμοποιώντας Tapatalk
CrazyGamerGR said:
I tried add gpu control panel in stweaks but i faild imo its better use kernel adiutor or any other kernel setting app,i added and yankactive but i wanna start from scratch(v4) for cleaner buuld
Στάλθηκε από το LG-D855 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
yeah i agree.
kernel adiutor is much better than stweaks.
Kernel adiutor is more complete but a little unstable(not stick sometimes and other bugs)i can't work in stweaks w/o help coz i wrote a tab and i tried so much to make the default freq but i faild thats why i ll work hust on govs ans other imlrovments
Update: after a lot problems in code i started from my scratch (v2) and i repatched it and i had more errors
Update2 ill do one more try ,if not be completed ill start my own project from zero
been on this kernel for a few days. I can attest to its' stability and battery life gains over the stock CM kernel
Great job Dev
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Summary CrazySuperKernel is a powerfull kernel with a lot super features!
Features
- CM12.1 ramdisk(25-12-15 FINAL LP ramdisk)
- Compiled with UBERTC 6.0(04-03-16)
- ofast optimize
- Full KA support with ota kernel updates
- Compiled with gcc optimization flags
- Kernel mode Neon
- Init.d support
- Franco sound control
- Logger switchable
- Frandom support
- SELinux set to permissive
- CPU governors : interactive, impulse, ondemand, smartmax, zzmoove, intellimm,ondemandplus,pegasusq,nightmare,conservative,lionheart,powersave,userspace,yankactive,smartmax_eps,optimax,slim,uberdemand,intellidemand,intelliactive,abyssplugv2,abyssplug,dancedance,tripandroid,hyper,darkness,lazy
- IO schedulers :bfq-cfq-noop-deadline-tripandroid-fiops-row-sio-zen-vr-fifo
- TCP congestion controls: cubic-bic-westwood-htcp-highspeed-hybla-reno-bic-hybla-vegas-lp-yeah-illinois-scalable
- Gpu governors :msm-adreno-tz, conservative,simple_ondemand,powersave,performance,userspace,cpubw_hwmon,msm_cpufreq
- simple gpu algorithm
- Cpu oc up to 2,84ghz
- Cpu underclock 268mhz
- Gpu oc up to 657mhz
- Gpu idle step 27mhz
- Slimbus overclock
- Kcal v2 with inverted colours
- Intelli plug hotplug
- mako hotplug
- bricked hotplug
- zen hotplug
- autosmp hotplug
- alucard hotplug
- msm sleeper (disabled by default)
- Screen wake and sleep functions
- Fast charge support (by yank555)
- LED extended control (by yank555)
- Arch power (enabled by default)
- Sched autogroup(disabled by default
- Prevent wakelock when ambiend display disabled(misc control tab)
- Dynamic filesystem read-ahead
- F2FS
- Power Efficient Workqueues
- UKSM
- Dynamic Filesystem Read-Ahead
- CPU Voltage Control
- Power Suspend Mode/State
- CRC Check Disabled
- Enabled All Suspend and Idle Modes
- QuickWakeUP
- Google's Snappy Compression/Decompression
- Dynamic FSync 2.0
- Intelli thermal v2
- A lot improvments
- A lot fixes
*some governors are disabled
Download Link:http://crazytechblog.blogspot.gr/2015/09/kernelsm-g900fcm121crazysuperkernel.html
Installation guide
- Download Kernel from this thread or from KernelAdiutor downloads(not yet)
- Flash it with Recovery
{Wipe cache and Dalvik cache recommended}
- Then Reboot
Enjoy the crazy super kernel !!!!
Credits
Thx Lord Boeffla - for his awesome help
Thx ShinySide - for the most commits in kernel from his kernel
Thx CrazyGamerGR - yeh me
Donators
Timothy
Denis
XDA:DevDB Information
CrazyProject, Kernel for the Samsung Galaxy S 5
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazySuperKernel-CM
Kernel Special Features: check the feature list
Version Information
Status: Stable
Stable Release Date: 2016-01-11
Beta Release Date: Daily
Created 2015-08-26
Last Updated 2016-01-11
[KERNEL][SM-G900F][CM12.1]CrazySuperKernel v11[UBERTC 6.0/-ofast optimize][11...
FAQ
Recommended app : Kernel Adiutor(we are official supported with ota kernel updates) compiled from source by me in #4 post
changelogs
v1/26-8-15
- initial release
v2/28-8-15
- updated ramdisk 27-8
- merged the changes from 27-8 nightly
- added mako hotplug
- added franco sound control
- deleted fauxsound
V3/30-8-15
- merged the changes from 28-8 nightly
- bricked hotplug
- zen hotplug
- autosmp hotplug
- msm sleeper (disabled by default)
- intelli thermal v2
V4/1-9-15
- updated ramdisk 31-8
- compiled with Architoolchain 5.2
- updated bfq v7r7
v5/1-9-15
- Compiled with UBERTC 6.0
v6/5-9-15
- ramdisk update 4-9
- optimize -ofast
- added 268mhz underclock step
- added simple gpu algorithm
- updated bfq v7r8
- a lot under the hood improvments
- some fixes
v7/11-9-15
- updated ramdisk 11-9
- added alucard hotplug
- disabled some governors
v8/12-10-15
- ramdisk update 12-10
- some fixes
v9/12-10-15
- ramdisk update 28-10
- better sound
- very important under the hood changes
- some fixes
v10/30-10-15
- ramdisk update 30-10
- update toolchain to 02-10-16 uber tc 6.0
V11/11-01-16
- Ramdisk update from latest aicp
- ubertc 6.0 update (1-12)
- ota updates from KA working but need to update sources
v12/04-03-16
- ubertc 6.0 update (04-03-16)
[KERNEL][SM-G900F][CM12.1]CrazySuperKernel v11[UBERTC 6.0/-ofast optimize][11...
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
Zzmove profiles
1 ) Default -> will set governor defaults -
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended! -
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving -
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving -
- DEV-NOTE: might give some lags! -
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting -
- DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction -
- DEV-NOTE: relict from back in the days, even though some people still like it! -
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online -
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast -
- down scaling/hotplugging behaving -
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience! -
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay -
-Soon more-
[KERNEL][SM-G900F][CM12.1]CrazySuperKernel v11[UBERTC 6.0/-ofast optimize][11...
Kernel Adiutor with all last features and bug fixes compiled by me from source
Download Link:https://www.androidfilehost.com/?fid=24052804347805592
Why did you do another one?
dr460nf1r3 said:
Why did you do another one?
Click to expand...
Click to collapse
Coz its other project with other features and its based on cm kernel without upstream patches
New build coming with mako hotplug and more features!
I wrote franco sound control too i ll check if work and i ll upload new version
New update is up and thx button is open
v2/28-8-15
- updated ramdisk 27-8
- merged the changes from 27-8 nightly
- added mako hotplug
- added franco sound control
- deleted fauxsound
In the next update i have include zen hotplug and bricked thx button is opened i added intelli thermal v2 too
CrazyGamerGR said:
In the next update i have include zen hotplug and bricked thx button is opened i added intelli thermal v2 too
Click to expand...
Click to collapse
Grate Update! Where would be the best place to find out more about the mako hotplug?
I thought I let you know that I have tried auto different suspend modes, I had given user space a go and found this the system gets stuck in a loop when charging whilst it's switched off.
HatchetEgg said:
Grate Update! Where would be the best place to find out more about the mako hotplug?
I thought I let you know that I have tried auto different suspend modes, I had given user space a go and found this the system gets stuck in a loop when charging whilst it's switched off.
Click to expand...
Click to collapse
Mako hotplug is in my opinion a very battery life hotplug driver u can set the load thershold for all online cpus and a lot other you can google it for more info,maybe soon i ll add info for all hotplugs in kernel.
I tested too suspend modes but i havn't any problem at least atm ^^
New update with more governors and hotplugs coming soon
I need some hours to work on kernel to fix the compile errors, the new build will be launch tommorow maybe.i need some rest time now ^^
All my code is a mess now thats why i ll start from scrarch i need 1 day more at least and maybe all upstream the kernel stay toon
CrazyGamerGR said:
All my code is a mess now thats why i ll start from scrarch i need 1 day more at least and maybe all upstream the kernel stay toon
Click to expand...
Click to collapse
Too many patches? IMO nit every governor /scheduler is worth of trouble. Some of them are only trivial copies, with few changes to established well known governors. Also popular governors, which are already available are usually good enough, and if one has but different preferences, they can be achieved by editing the configuration values/tunables.
Not against trying new, but maybe it would be better you check/investigate which of the governors/schedulers, or patches in general are really promising and worth of your time, and include only these one or two governors /schedulers you think are the best together with those which are default/stock?
Sent from my SM-G900F using Tapatalk
!crazy said:
Too many patches? IMO nit every governor /scheduler is worth of trouble. Some of them are only trivial copies, with few changes to established well known governors. Also popular governors, which are already available are usually good enough, and if one has but different preferences, they can be achieved by editing the configuration values/tunables.
Not against trying new, but maybe it would be better you check/investigate which of the governors/schedulers, or patches in general are really promising and worth of your time, and include only these one or two governors /schedulers you think are the best together with those which are default/stock?
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
I m doing this now i test them one by one and i ll disable a lot like optimax,abyssplug v2 and main and other too but i played with oc fast charge control and other and made a mess i rewrite anything from start now : /
The upsteam broke my build again i ll work the next days from scratch again:/
The source are clean and up again later today i ll upload a new version!
CrazyGamerGR said:
The source are clean and up again later today i ll upload a new version!
Click to expand...
Click to collapse
Do you think Bluetooth audio desync with video could be a kernel related issue or firmware cause?
Currently on the latest OB1 firmware for T-Mobile variant. Past two months or more I've noticed this little nuisance but I've never tested if firmware would be a cause or kernel related. I updated due to bad LTE signal strength slightly before release of the new firmware with some improvements. I feel like the latest band release (12) is taking over here in north Phoenix as previous 4G/LTE coverage seems to be getting worse, at least in my experience.
Sent from my SM-G900T using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
If you get bootloop click here
Summary CrazySuperKernel is a powerfull kernel with a lot super features!
Features
- CPF7 ramdisk
- Built from Samsung Marshmallow Kernel Source Update CPF7 for G900F
- OTA Updates from Kernel Adiutor app
- Anykernel2 zip For maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
- Synapse Support - Complete Kernel Control!! (need download the app from Play Store)
- Compiled with UBERTC 4.9 [latest update]
- init.d support
- insecure kernel (adb has root privileges)
- Faux sound control
- Frandom support
- CPU governors : interactive, impulse, ondemand, smartmax, zzmoove, intellimm,ondemandplus,pegasusq,nightmare,conserva tive,lionheart,powersave,userspace,yankactive,smar tmax_eps,optimax,slim,uberdemand,intellidemand,int elliactive,abyssplugv2,abyssplug,dancedance,tripan droid,hyper,darkness,lazy
- IO schedulers :bfq-tripndroid-cfq-noop-deadline-fiops-row-sio-zen-vr-fifo
- TCP congestion controls: cubic-bic-westwood-htcp-highspeed-hybla-reno-bic-hybla-vegas-lp-yeah-illinois-scalable
- Gpu governors :msm-adreno-tz, conservative,simple_ondemand,powersave,performance ,userspace,cpubw_hwmon,msm_cpufreq
- Kcal v2 with inverted colours
- Intelli thermal v2
- Intelli plug hotplug
- MSM-Sleeper Hotplug
- MSM-Zen Hotplug
- Bricked Hotplug
- Alucard Hotplug
- AutoSMP Hotplug
- Adreno idler
- Fast charge support (by yank555)
- LED extended control (by yank555)
- Prevent wakelock when ambiend display disabled(misc control tab)
- Wake And Sleep Functions
- CPU Voltage Control
- Slimbus overclock
- UKSM
- Enabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Android Logging switcher
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- QuickWakeUP
- Dynamic FSync 2.0
- A lot improvments
- A lot fixes
Download Link [AnyKernel] [V4]:https://www.androidfilehost.com/?fid=457095661767116059
Download Link [V3]:https://www.androidfilehost.com/?fid=24591000424948754 Only AnyKernel version is updated!
Download Link UKM/Synapse support here:Crazy-UKM V4.0
Download Link UKM Unistaller here:https://www.androidfilehost.com/?fid=24591000424940110
If you like my work, donations are always welcome.
Don't forget to hit thanks, it's free
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Credits
- Thx the devs where created the features where included in kernel
- Thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazySuperKernel, Kernel for the Samsung Galaxy S 5
Contributors
CrazyGamerGR
Source Code: [url]https://github.com/CrazyGamerGR/CrazySuperKernel-TW-MM-KLTE-REBASE[/URL]
Source code Crazy-UKM: [url]https://github.com/CrazyGamerGR/CrazySuperKernel_UKM[/URL]
Kernel Special Features: check the feature list
Version Information
Status: Testing
Current Stable Version: Weekly
Stable Release Date: 2016-06-02
Current Beta Version: Daily
Beta Release Date: 2016-06-01
Created 2016-06-01
Last Updated 2016-06-02
FAQ
Recommended apps : Synapse Support - Complete Kernel Control (need download the app from Play Store) & Kernel Adiutor (with kernel ota updates!) + Kernel Adiutor mod with much more features builded from source by TioCareca (Download Link: https://mega.nz/#!1ZVDQIgL!bHBvHC9AYMCDM4h7w50rjGzFnsiZfxtYUPOw5gbvecM)
changelogs
v1/01-06-16
- initial release
v2/02-06-16
- ota updates from KernelAdiutor app
- added intelli thermal v2
- added dynamic filesystem read-ahead
- added bfq sched
- enabled tripndroid sched
v3/21-07-16
- rebase CPF7 update
- clean up
- many fixes
- anykernel2 update (work with any variant)
- normal zip (boot with a few variants only)
v4/17-11-17
-anykernel update
-init.d support
-insecure kernel (adb has root privileges)
If you get bootloop or bootloop before samsung screen press volume up+down+power button until device vibrate and fast press power+volume up and device will be boot in recovery,instal your rom(dirty instal not need clean instal) and everything will be good^^.
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
Zzmove profiles
1 ) Default -> will set governor defaults -
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended! -
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving -
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving -
- DEV-NOTE: might give some lags! -
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting -
- DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction -
- DEV-NOTE: relict from back in the days, even though some people still like it! -
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online -
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast -
- down scaling/hotplugging behaving -
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience! -
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay -
reserve 1
Thanks for your effort
Any chance of a multi-variant in the future?
djb77 said:
Thanks for your effort
Any chance of a multi-variant in the future?
Click to expand...
Click to collapse
Its with anykernel zip so it will build with your kernel ( need to be on your stock kernel).Its not tested yet but if it boot for g900f variant must boot on some other variant too.
Sent from my Nexus 5X using XDA-Developers mobile app
CrazyGamerGR said:
Its with anykernel zip so it will build with your kernel ( need to be on your stock kernel).Its not tested yet but if it boot for g900f variant must boot on some other variant too.
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
I'll do a test with G900I and let you know
djb77 said:
I'll do a test with G900I and let you know
Click to expand...
Click to collapse
Thx m8 Need to be on stock kernel and not on any other custom kernel to work correct.
Just to confirm. This kernel works on TW 6.0.1 900f?
owais0903 said:
Just to confirm. This kernel works on TW 6.0.1 900f?
Click to expand...
Click to collapse
Created for that variant and for tw 6.0.1 but need test if boot.
Sent from my Nexus 5X using XDA-Developers mobile app
CrazyGamerGR said:
Created for that variant and for tw 6.0.1 but need test if boot.
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks.Will give it a try and let u know.
Boots on G900I fine
owais0903 said:
Thanks.Will give it a try and let u know.
Click to expand...
Click to collapse
Thx ^^
Sent from my Nexus 5X using XDA-Developers mobile app
djb77 said:
Boots on G900I fine
Click to expand...
Click to collapse
Awesome,thx for feedback m8.
Sent from my Nexus 5X using XDA-Developers mobile app
Just flashed your kernel on G900F, running xXx No Limits 4.2 Rom (CPE2).
Seems to be well and stable. Will continue testing.
Gesendet von meinem SM-G900F via XDA-Developers mobile app
G900F, running xXx No Limits 4.2 Rom (CPE2). I got an error during flash:
Installing kernel...
New image larger than boot partition. Aborting...
E: Error in /sdcard/CrazySuperKernel-tw-v1-anykernel2.zip
(Status 1)
E: Installation abortetd.
Edit:
I had phoenix kernel v8 installed, that was the problem.
Flashing this kernel from stock kernel worked.
Edit2:
Can we OC the CPU?
Thank.
Add cpu oc and will be great
Sci-Man85 said:
Just flashed your kernel on G900F, running xXx No Limits 4.2 Rom (CPE2).
Seems to be well and stable. Will continue testing.
Gesendet von meinem SM-G900F via XDA-Developers mobile app
Click to expand...
Click to collapse
Thx for testing
Sent from my Nexus 5X using XDA-Developers mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
If you get bootloop click here
Summary CrazySuperKernel is a powerfull kernel with a lot super features!
If you got any bug use the report bug tab or press HERE and upload the log,WITHOUT LOGS THERE IS NO BUG!
I m not a magician and i havn't got the device to do it on my own without spend your time.
INDEX
POST 1
-Imprtant info
-Report bug with Logs
-Features
-Dowload link
-Donator
-Credits
POST 2
-Recommended kernel tweaker tools
-Changelogs
POST 3
-Bootloop fix
POST 4
-Zzmoove profiles
Features
OTA Updates:
- OTA Updates from Kernel Adiutor app(coming soon)
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
Kernel tweaker app:
- CrazySuperKernel Adiutor included!
Toolchain:
DF 4.9 Toolchain [latest update]
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- input boost
- state notifier
- overclock/underclock
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
Sound:
- Faux sound updated and fixed
More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Find this thread helpful? Hit the Thanks button!
The speed of future releases will be based on thanks. 39k views, 400 downloads and only 19 thanks... I won't be rushing anything.
Feeling extra generous and wanna help me more? Click my name at the top of any post and hit donate or click here the donation button
Download Link CrazySuperKernel [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=138269
Download Link CrazySuperKernelAdiutor[Updated]:https://www.androidfilehost.com/?w=files&flid=139961
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Donators
fbs
Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazySuperKernel, Kernel for the Samsung Galaxy S5
Contributors
CrazyGamerGR
Source Code CrazySuperKernel: https://github.com/CrazyGamerGR/CrazySuperKernel-CM14.1-KLTE-New-rebase
Kernel Special Features: check the feature list
Version Information
Status: Testing
Current Stable Version: Weekly
Stable Release Date: 2016-12-24
Current Beta Version: Daily
Beta Release Date: 2016-11-12
Created 2016-10-22
Last Updated 2016-12-24
FAQ
Recommended app : CrazySuperKernel Adiutor(included)
changelogs
v1/22-10-16
- initial release
v2/22-10-16
- upstream updates from cyanogenmod
- added intelli thermal v2
v3/07-11-16
- upstream updates from cyanogenmod
- Anykernel update
- deleted many hotplugs
v4/09-11-16
- upstream updates from cyanogenmod
- Anykernel update
- removed slim governor
- removed intellimm governor
v5/10-11-16
- removed many unstable governors
- clean up some files
- bug fixes
v6/11-11-16
- fixed recent SafetyNet failure,you can use Android Pay again (thx Sultanxda)
- Anykernel update
- Anykernel clean up
v7/12-11-16
- upstream updates from cyanogenmod
v8/13-11-16
- many fixes under the hood
v9/14-11-16
- big anykernel update
-removed uksm (battery drain fixed)
-insecure kernel (adb has root privileges)
v10/17-11-16
-init.d support
-simple ondemand gpu governor update
-msm adreno tz governor update
-tap2wake update
-kcal update
-touch boost update
-cpu boost update
-touchkey control update
-conservative gpu gov removed
-some fixes
-some useless features removed
v11/17-11-16
- upstream updates from cyanogenmod
v12/22-11-16
- upstream updates from cyanogenmod
- added crazyactive(my governor[info:balance governor for great battery life and performance based on interactive])
- added updated UKM(synapse) in anykernel
- anykernel update for better nougat compatibility
v13/10-12-16
- anykernel big updates
- upstream updates from cyanogenmod
- disabled completly mpdecision
- enabled updated bricked hotplug
- script with many set up for kernel features included in anykernel zip
- added led tab in synapse
- fixed many synapse bugs
- removed wake functions
- removed touch boost and cpu boost
- faux sound updated
- deleted unstable hotplugs
- fixed many bugs
- battery improve
- performance improve
- some feature fixed
- many improvments under the hood
v14/24-12-16
- synapse update(thx GalaticStryder)
- anykernel fixes and update
- many features updated
- added input boost by Sultanxda
- added overclock
- added my underclock step
v15/25-12-16
- synapse fixes
- anykernel fixes
- faux sound update and fixes
v16/25-12-16
- faux sound fixes
- synapse fixes
v17/27-12-16
- added CrazySuperKernel Adiutor (included)
- removed slimbus overclock
- removed updated faux sound
- added stable faux sound
If you get bootloop or bootloop before samsung screen press volume up+down+power button until device vibrate and fast press power+volume up and device will be boot in recovery,instal your rom(dirty instal not need clean instal) and everything will be good^^.
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
Zzmove profiles
1 ) Default -> will set governor defaults -
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended! -
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving -
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving -
- DEV-NOTE: might give some lags! -
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting -
- DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction -
- DEV-NOTE: relict from back in the days, even though some people still like it! -
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online -
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast -
- down scaling/hotplugging behaving -
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience! -
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay -
reserve 1
reserve 2
Thanks man. Going to try it out.
Works great!!!! Thank you!!!!!!
heshan_1010 said:
Works great!!!! Thank you!!!!!!
Click to expand...
Click to collapse
Thank you for the feedback
Eta: intelli thermal added and now i ll upstream it and i ll upload new version soon!
Good to see your kernel for the rom
Sent from my SM-G900M using XDA-Developers mobile app
After Lord Boeffla will quit kernel development for the S5 after MM it is very good to see you developing for CM14, very appreciate it
Regards
Gesendet von meinem SM-G900F mit Tapatalk
HAJT669 said:
Good to see your kernel for the rom
Click to expand...
Click to collapse
I ll continue for many more months for this device.
j1gga84 said:
After Lord Boeffla will quit kernel development for the S5 after MM it is very good to see you developing for CM14, very appreciate it
Regards
Gesendet von meinem SM-G900F mit Tapatalk
Click to expand...
Click to collapse
I ll continue this project for the s5 for many more months and not only kernel,i hope i ll start building and a rom too soon.
New update is up!!
Intelli thermal added and upstream updates from cyanogenmod.
Any1 up to test oc cpu and uc in the next test build?
Test Kernel is here with oc/uc cpu and 27mhz gpu step
Download Link here: https://www.androidfilehost.com/?fid=529152257862669482
and new ukm test be careful not all settings are careful Download Link:https://www.androidfilehost.com/?fid=457095661767103515
Synapse Unistaller:https://www.androidfilehost.com/?fid=24591000424940110
CrazyGamerGR said:
Test Kernel is here with oc/uc cpu and 27mhz gpu step
Download Link here: https://www.androidfilehost.com/?fid=529152257862669482
and new ukm test be careful not all settings are careful Download Link:https://www.androidfilehost.com/?fid=457095661767103515
Synapse Unistaller:https://www.androidfilehost.com/?fid=24591000424940110
Click to expand...
Click to collapse
Hi I can't set any oc/uc cpu or the 27mhz GPU step with the actual test kernel v3. Kernel Auduitor(0.9.31.1) don't show them.
The rest seems to work fine .
Greetings Georg
schorsch.funke said:
Hi I can't set any oc/uc cpu or the 27mhz GPU step with the actual test kernel v3. Kernel Auduitor(0.9.31.1) don't show them.
The rest seems to work fine .
Greetings Georg
Click to expand...
Click to collapse
Thx for the feedback,27mhz step its just idle,ukm works?(synapse)
CrazyGamerGR said:
Thx for the feedback,27mhz step its just idle,ukm works?(synapse)
Click to expand...
Click to collapse
Kernel Adjustors say yes.
Full scans 4, pages shared 51, pages sharing 2613, pages unshared 823. This last 3 numbers are frequently changing.