Help! After repartition tool my storage encrypt then when wiping ths is my error.
Im wiping through recovery
failed to mount /data
Mount /data error
Revert to stock fw.
Sent from my mesona using Z-Fusion rom
Hello,
I have a bootloop on my SGS 2 after flashing PhilZ-cwm6-ZSLPQ-OZS-3.99-signed.zip in recovery.
I had installed the MIUIV5 ROM : SGS2-3.8.23-FR-signed.zip on a Siyah kernel but we are supposed to have a new kernel for JB that is why I tried this PhilZ's kernel
the error messages are : E: failed to mount exfat /dev/block/mmcblk1p1 /sdcard
and after tweaking some more, I have a failure to mount sdcard (I had formatted many thing in the hope to clean things up but I am lost now.
Would any one have an idea to help me recover my phone ?
Hi!
I tried to install Android on Samsung Wave GT-S8500. I flashed FOTA and bootloader and got into recovery but since it can't mount /system (same goes for /data and /cache) I can't install any ROM or make any backup.
Is there any way to get those partitions to mount as they should?
wrong kernel. Search Kernel NAND and copy it on SD. You have Kernel SD and u need ro format SD for install any rom
Hi Guys,
I'm pretty new here and hoping you can all help me with unbricking my phone.
So I have a Samsung S3 I9300, with CM 13.0 installed, I am using CW recovery v2.7.0.0
I've installed many custom ROMS to this device over the past few years without a problem, each time formatting and wiping Dalvik cache etc..
Today my phone randomly rebooted and a message came up that my phone failed to encrypt and it wiped all my data and that I had to reboot into recovery to perform a factory reset.
A bit random I thought.. So I rebooted into recovery and did a "reset to default" in CW.. this was successful, however I noticed some issues on the terminal screen...
Code:
E: Unable to find partition size for /boot
E: Unable to find partition size for /recovery
E: Primary block device /dev/block/mmcblk0p12 for mount point is not present!
E: Unable to mount internal storage
E: Unable to mount /data/media during GUI startup
E: Unable to mount /cache
Full SELinux support is present
E: Unable to mount /cache
E: Unable to mount /cache
E: Unable to mount /data/media/TWRP/.twrps when trying to read settings file
E: Unable to mount /data
Updating Partition details...
E: Unable to mount /efs
E: Unable to mount /data
E: Unable to mount /data
E: Unable to mount /cache
E: Unable to mount /system
E: Unable to mount /data
E: Unable to mount /preload
E: Unable to mount internal storage
I've tried to format but it shows failed.
I cannot install another ROM as both the internal memory and SD card both show 0MB
I've plugged the SD card into my computer and there are still files on the card.
I've had a look online and found that typing in a command into the terminal should fix it, however nothing happens..
I get an error that mmcblk0p12 does not exist.
Code:
mke2fs /dev/block/mmcblk0p12
Any help would be great! Although i'm pretty sure it's bricked
Cheers Guys!
Chris
Gizzy00360 said:
Hi Guys,
I'm pretty new here and hoping you can all help me with unbricking my phone.
So I have a Samsung S3 I9300, with CM 13.0 installed, I am using CW recovery v2.7.0.0
I've installed many custom ROMS to this device over the past few years without a problem, each time formatting and wiping Dalvik cache etc..
Today my phone randomly rebooted and a message came up that my phone failed to encrypt and it wiped all my data and that I had to reboot into recovery to perform a factory reset.
A bit random I thought.. So I rebooted into recovery and did a "reset to default" in CW.. this was successful, however I noticed some issues on the terminal screen...
Code:
E: Unable to find partition size for /boot
E: Unable to find partition size for /recovery
E: Primary block device /dev/block/mmcblk0p12 for mount point is not present!
E: Unable to mount internal storage
E: Unable to mount /data/media during GUI startup
E: Unable to mount /cache
Full SELinux support is present
E: Unable to mount /cache
E: Unable to mount /cache
E: Unable to mount /data/media/TWRP/.twrps when trying to read settings file
E: Unable to mount /data
Updating Partition details...
E: Unable to mount /efs
E: Unable to mount /data
E: Unable to mount /data
E: Unable to mount /cache
E: Unable to mount /system
E: Unable to mount /data
E: Unable to mount /preload
E: Unable to mount internal storage
I've tried to format but it shows failed.
I cannot install another ROM as both the internal memory and SD card both show 0MB
I've plugged the SD card into my computer and there are still files on the card.
I've had a look online and found that typing in a command into the terminal should fix it, however nothing happens..
I get an error that mmcblk0p12 does not exist.
Code:
mke2fs /dev/block/mmcblk0p12
Any help would be great! Although i'm pretty sure it's bricked
Cheers Guys!
Chris
Click to expand...
Click to collapse
Did you have any success with this, Chris?
This sounds like what happened to my I9300 on CM12.1. It just froze and only rebooted to Samsung logo and stayed there.
When in TWRP recovery, there's just no access to internal memory or SD card.
The terminal mentions a lot of "E: unable to mount /data", /cache, /system, storage, etc
Most TWRP options fail to do anything, because of not being able to access partitions.
No factory reset, no wipes, no installing img's. When rebooting to system, it warns about no OS being installed.
Downloading a stock firmware now to see if it flashes via ODIN, but I don't have high hopes for it.
Does anybody know what would cause this? Or is it just bricked now?
petitgregory said:
Did you have any success with this, Chris?
This sounds like what happened to my I9300 on CM12.1. It just froze and only rebooted to Samsung logo and stayed there.
When in TWRP recovery, there's just no access to internal memory or SD card.
The terminal mentions a lot of "E: unable to mount /data", /cache, /system, storage, etc
Most TWRP options fail to do anything, because of not being able to access partitions.
No factory reset, no wipes, no installing img's. When rebooting to system, it warns about no OS being installed.
Downloading a stock firmware now to see if it flashes via ODIN, but I don't have high hopes for it.
Does anybody know what would cause this? Or is it just bricked now?
Click to expand...
Click to collapse
Hey there,
Nope the cmd I found on-line I found (above) didn't work.
Its currently just stuck on the Samsung splash screen and fails to do anything.
Gizzy00360 said:
Hey there,
Nope the cmd I found on-line I found (above) didn't work.
Its currently just stuck on the Samsung splash screen and fails to do anything.
Click to expand...
Click to collapse
Ah well, mine seems dead too. The recovery doesn't work anymore, only download mode, but ODIN can't get anything on it...
I think the main storage just died.
petitgregory said:
Ah well, mine seems dead too. The recovery doesn't work anymore, only download mode, but ODIN can't get anything on it...
I think the main storage just died.
Click to expand...
Click to collapse
Damn, I dunno what happened.. My CM was a nightly though, SO I can only assume it was unstable.
Just bizarre how my phone rebooted and gave the message that it was unable to encrypt the device and needed to be factory reset.
Gizzy00360 said:
Damn, I dunno what happened.. My CM was a nightly though, SO I can only assume it was unstable.
Just bizarre how my phone rebooted and gave the message that it was unable to encrypt the device and needed to be factory reset.
Click to expand...
Click to collapse
I was running a quite stable CM12.1 version for a couple of months now. Only had two reboots all this time.
petitgregory said:
I was running a quite stable CM12.1 version for a couple of months now. Only had two reboots all this time.
Click to expand...
Click to collapse
I had a few reboots when it was working, then it just suddenly bricked my phone
Sounds like the eMMC brickbug. You need to get the eMMC replaced. All of you that face the problems.
Well, after four years my S3 was getting very slow. It was bearable with CM, but I decided to say farewell now.
Also, my microphone was busted when I dropped it at some point, so I could only call with a headset anyway.
It's not worth replacing I think, time to move on
The same happened to my Beelink GT1 S912 9377 TV-box (after failed OTA update). Will check eMMC brickbug (from TWRP) ...
Im using Moto E 1st generation, Bootloader unlocked with TWRP custom recovery. I was using custom rom Marshmallow by Temasek and I thought to change the rom. Recently, I upgraded TWRP to 3.0.2-0.
I have wiped system, dalvik, internal storage, cache and data everything went smoothly.
when i tried to install Rom zip i encounter and error that causing boot loop.
HTML:
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name system at /system: invalid argument
unmount of /system failed : no such volume
Patching system image unconditionally ...
flashing Supersu..
scripting succeed result was []
update partition details
...done
when i reboot, my phone goes in boot loop.
i tried with repair or change file system but still the error is same
my file system and format
/system ext4
/Data ext4
/cache ext4
Please Help to recover my mobile thank you...
flash the stock firmware, some times it fix this issues.
flash the stock firmware without flashing the recovery partition, and flash again twrp to avoid any issue, then flash temasek