My opx is the Chinese version- E1001.
had H2os V1.20 version . with playstore and other google services(stock recovery , i suppose!).
then i flashed H2os v1.3 and most of the google services( drive , map still works) stopped working.
now i want to change my os to Oxygen os. (installing G apps is quiet difficult for me)
can i directly flash it?
I found the steps below on internet.....
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
1.Download the OxygenOS zip file from this XDA thread.
2.Connect your OnePlus X to your PC.
3.Do not unzip the ROM, and move it over to the OnePlus X’s internal storage.
4.Turn off the OnePlus X.
5.Press Volume Down and the Power button together to get the OnePlus X in to recovery mode.
6.Choose “English” > “Wipe data and cache” > “Install from local” > navigate to the Oxygen OS ROM.
7.Choose “OK” and wait for the update process to end.
Once installed your OnePlus X should reboot and now be running a fresh installation of Oxygen OS
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
is it okay? or is there any other solution!!!
plz help.....any suggestion will be appreciated. TIA
As long as you have unlocked boot loader and have TWRP, you can definitely do that.
I didn't do twrp
I think twrp is not required if you want to install OxygenOS or H2OS. Just download and flash the os' zip with stock recovery.
I got my opx from a 3rd party including google apps.
when I flashed new version of h2os manually, without any problem,,,,but google apps stopped working.
here in xda forum...one told me that it is on stock recovery.
does that mean it got twrp and unlocked bootloader???
if install fails, will it do any harm?
there won't any problem. I have done that several times and it was working fine. Just follow the official instruction on oneplus homepage:
Code:
http://downloads.oneplus.net/2016-02-23/opx/OnePlus_X_OxygenOS_2.2.0-hotfix/
himumama11 said:
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
1.Download the OxygenOS zip file from this XDA thread.
2.Connect your OnePlus X to your PC.
3.Do not unzip the ROM, and move it over to the OnePlus X’s internal storage.
4.Turn off the OnePlus X.
5.Press Volume Down and the Power button together to get the OnePlus X in to recovery mode.
6.Choose “English” > “Wipe data and cache” > “Install from local” > navigate to the Oxygen OS ROM.
7.Choose “OK” and wait for the update process to end.
Once installed your OnePlus X should reboot and now be running a fresh installation of Oxygen OS
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Click to expand...
Click to collapse
yup, this is the correct step to flash from h2os to oxygen. No need twrp and unlock bootloader. I can confirm this because Im using E1001.
I have done it too. don't worry. you can flash OOS with stock recovery and it will work normal. same for H2OS (BUT you will not have google apps with H2OS.)
RWBY said:
yup, this is the correct step to flash from h2os to oxygen. No need twrp and unlock bootloader. I can confirm this because Im using E1001.
Click to expand...
Click to collapse
knauji said:
I have done it too. don't worry. you can flash OOS with stock recovery and it will work normal. same for H2OS (BUT you will not have google apps with H2OS.)
Click to expand...
Click to collapse
thnx a lot...brother.
I will give it a try.
do I have to wipe cache before flashing?
himumama11 said:
do I have to wipe cache before flashing?
Click to expand...
Click to collapse
Wipe everything bro
Sent from my ONE E1001 using Tapatalk
Thnx a lot guys.
It all worked..... Everything is fine till now.
Thnx again.
Oxygen To Hydrogen OS.
himumama11 said:
My opx is the Chinese version- E1001.
had H2os V1.20 version . with playstore and other google services(stock recovery , i suppose!).
then i flashed H2os v1.3 and most of the google services( drive , map still works) stopped working.
now i want to change my os to Oxygen os. (installing G apps is quiet difficult for me)
can i directly flash it?
I found the steps below on internet.....
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
1.Download the OxygenOS zip file from this XDA thread.
2.Connect your OnePlus X to your PC.
3.Do not unzip the ROM, and move it over to the OnePlus X’s internal storage.
4.Turn off the OnePlus X.
5.Press Volume Down and the Power button together to get the OnePlus X in to recovery mode.
6.Choose “English” > “Wipe data and cache” > “Install from local” > navigate to the Oxygen OS ROM.
7.Choose “OK” and wait for the update process to end.
Once installed your OnePlus X should reboot and now be running a fresh installation of Oxygen OS
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
is it okay? or is there any other solution!!!
plz help.....any suggestion will be appreciated. TIA
Click to expand...
Click to collapse
Same method is for installing Oxygen OS to Hydrogen OS? I've a Unrooted OnePlus X ??????? I want to switch to Hydrogen from Oxygen OS..
meesna said:
Same method is for installing Oxygen OS to Hydrogen OS? I've a Unrooted OnePlus X ??????? I want to switch to Hydrogen from Oxygen OS..
Click to expand...
Click to collapse
Yes.
Oxygen To Hydrogen OS.
knauji said:
Yes.
Click to expand...
Click to collapse
I downloaded and installed.. But it is not working proper. Screen is continously blinking and when I tap on the screen on icons it becomes dark/gone. what to do?
meesna said:
I downloaded and installed.. But it is not working proper. Screen is continously blinking and when I tap on the screen on icons it becomes dark/gone. what to do?
Click to expand...
Click to collapse
Did you wipe cache after flashing?
Factory reset?
Related
Hi All,
I have successfully rooted my devise ( Moto E) and continued using on it. Accidentally i have wiped all data in internal storage ( including OS) . Now my devise is without OS, can anyone plz guide me to install OS in my mobile.
I have team win on my phone. I went to factory reset which lead me to team win, and I choose to delete everything and didn't realize there was operating system in it too.
How can I reinstall my Android OS?
you may check this thread - http://forum.xda-developers.com/moto-e/general/guide-one-moto-e-beginners-guide-t2807891
akxt1022 said:
you may check this thread - http://forum.xda-developers.com/moto-e/general/guide-one-moto-e-beginners-guide-t2807891
Click to expand...
Click to collapse
i have rooted my devise with the above mentioned guide, now i want the OS zip or ISO file to flash it on my devise, So kind full to guide me where to download the OS.
Thanks in advance
Yuviprince said:
i have rooted my devise with the above mentioned guide, now i want the OS zip or ISO file to flash it on my devise, So kind full to guide me where to download the OS.
Thanks in advance
Click to expand...
Click to collapse
You will need to flash using fastboot.
There is a guide in general section describing the process.
You will need the fastboot files for your device. Find those and its fairly simple to flash.
Tapped from my Moto X
Yuviprince said:
i have rooted my devise with the above mentioned guide, now i want the OS zip or ISO file to flash it on my devise, So kind full to guide me where to download the OS.
Thanks in advance
Click to expand...
Click to collapse
There are lot of OS i.e. ROMs available on the Moto E forum. You can download one of them its your choice !!!
Btw i like cm 12.1 and Temasek 1.8
Sent from my Moto E using Tapatalk
Do this
1)Power off your phone
2)remove the sd card
3)Use a card reader and copy paste the rom and gapps file from your pc ( if you have one)
or download rom and gapps from device and move thm in your phone.
4)nsert the memory card back
5)boot into recovery by pressing "VOLUME DOWN and POWER KEY"
and flash the rom
DONE!!
Im assuming you know how to flash the ROM
Hello,
I've been using Mido over one year, never faced such a weird problem.Whenver I flash Pie Based Roms the whole screen goes blank when the Rom boots up.I've followed each & every instructions as per OP,still same result but everything works fine on Oreo/Nougat based Roms.I've used TWRP by warabhishek/Pitchblack TWRP/OrangeFox TWRP,I'm on latest 8.9.6 firmware. Tried almost every pie based roms/GSI for Mido.
Can anyone provide a fix for this issue?
Edit : So I've fixed it myself after researching on the MIUI forum.Some people got this issue on various xiaomi devices after updating MIUI,After they did a Factory reset everything went normal.So I decided to test this,I did things,which are mentioned below.
1.I was on Oreo Rom so I flashed a fastboot miui rom.(Don't lock the bootloader)
2.After the Miui rom booted,Turned on the usb debugging
3.Booted into MIUI Recovery, Performed a factory reset (I know it sounds strange,but stay sure it's going to work)
4.Flashed Treble-TWRP by abhishek
5.Once again format data from advanced wipe (Need to remove the encryption)
6.Wipe system>data>cache>vendor
7.Flash any Pie Rom & Gapps
8.Reboot
Now you won't face that strange black screen issue anymore.
Thanks
flash boot.img extracted from the rom.zip file after flashing rom via TWRP. When flashing finished, don't restart to System, select Restart to Bootloader then type below command.
Go to fastboot then type fastboot flash boot boot.img
yawarniazi said:
flash boot.img extracted from the rom.zip file after flashing rom via TWRP. When flashing finished, don't restart to System, select Restart to Bootloader then type below command.
Go to fastboot then type fastboot flash boot boot.img
Click to expand...
Click to collapse
Are you sure this will work? cause I've wasted many hours in flashing these Roms but no success. If you're quite sure about this I will definitely try this
yawarniazi said:
flash boot.img extracted from the rom.zip file after flashing rom via TWRP. When flashing finished, don't restart to System, select Restart to Bootloader then type below command.
Go to fastboot then type fastboot flash boot boot.img
Click to expand...
Click to collapse
And another thing is, when Rom boots up, If I press volume buttons, I can see volume sliders but nothing more.Everything else is black.
Try...
To flash stable firmware 9.6.2! Gcam work in my case.
Alfonso13 said:
To flash stable firmware 9.6.2! Gcam work in my case.
Click to expand...
Click to collapse
I'm pretty sure bro,this isn't related with Firmware.It's something else
Rocky said:
And another thing is, when Rom boots up, If I press volume buttons, I can see volume sliders but nothing more.Everything else is black.
Click to expand...
Click to collapse
I think yor phone is Encrypted.My mido whas doing this thing when it was encrypted.
Sent from my [device_name] using XDA-Developers Legacy app
hiey said:
I think yor phone is Encrypted.My mido whas doing this thing when it was encrypted.
Click to expand...
Click to collapse
Nope I already decrypted while flashing
have you fixed it already? I'm waiting for few months for Pie roms to be stabled.
RebornCheiko said:
have you fixed it already? I'm waiting for few months for Pie roms to be stabled.
Click to expand...
Click to collapse
No fix yet ?
Update : I've fixed it,Read the Original Post to get the solution
Rocky said:
Update : I've fixed it,Read the Original Post to get the solution
Click to expand...
Click to collapse
I tried your method, it doesn't work for me on 10. I am using CrDroid 10. I faced the same issue with some ROM in Pie also. Please advice.
Arifcatalyst said:
I tried your method, it doesn't work for me on 10. I am using CrDroid 10. I faced the same issue with some ROM in Pie also. Please advice.
Click to expand...
Click to collapse
Did you performed a factory reset from MIUI Recovery?
Rocky said:
Did you performed a factory reset from MIUI Recovery?
Click to expand...
Click to collapse
Yes, I booted in Recovery and then wiped the data.
Arifcatalyst said:
Yes, I booted in Recovery and then wiped the data.
Click to expand...
Click to collapse
Idk what's happening with you but I found this useful, while nobody had idea about this problem. You can try flashing older miui fastboot rom, like miui9/10 then perform a factory reset with miui default recovery.then try switching to other custom roms.Let me know the update.
HI there, total newbie here. Looked around here and on google but didn't find a solution.
I'm following various step by step guides to install Android Pie on my Poco F1 but I get stuck once the phone boots up in TWRP and asks me password, I cancel and try to install but when I press install the zip files that I have saved on the phone internal storage are not there (Magisk and Disable Force Encryption Treble). ANyone has a similar problem?
Used a different Twrp to root my S8 and didn't have any problem seein the zip files saved in the phone internal storage.
Can someone help please?
THanks a lot,
MAnuel
Dedalus73 said:
HI there, total newbie here. Looked around here and on google but didn't find a solution.
I'm following various step by step guides to install Android Pie on my Poco F1 but I get stuck once the phone boots up in TWRP and asks me password, I cancel and try to install but when I press install the zip files that I have saved on the phone internal storage are not there (Magisk and Disable Force Encryption Treble). ANyone has a similar problem?
Used a different Twrp to root my S8 and didn't have any problem seein the zip files saved in the phone internal storage.
Can someone help please?
THanks a lot,
MAnuel
Click to expand...
Click to collapse
Im facing the same issues like you. here is what i did.
1) Flash back stable miui rom.
2) setup as usual and DONT PUT ANY LOCKSCREEN on it.
3) install twrp recovery with description support.
4) flash disable force encryption. format data , and reboot recovery again.
5) install magisk.
6) install beta miui rom based on android Pie.
success
Sent from my POCOPHONE F1 using Tapatalk
Mohd Haikal said:
Im facing the same issues like you. here is what i did.
1) Flash back stable miui rom.
2) setup as usual and DONT PUT ANY LOCKSCREEN on it.
3) install twrp recovery with description support.
4) flash disable force encryption. format data , and reboot recovery again.
5) install magisk.
6) install beta miui rom based on android Pie.
success
Sent from my POCOPHONE F1 using Tapatalk
Click to expand...
Click to collapse
Thanks for your answer but from point 3 onwards I cannot understand how to do it. What does it mean with description support? How do I disable force encrypition and reboot recovery agfain?
Dedalus73 said:
Thanks for your answer but from point 3 onwards I cannot understand how to do it. What does it mean with description support? How do I disable force encrypition and reboot recovery agfain?
Click to expand...
Click to collapse
im sorry for the typo. i mean decryption support not description.
download at here . find the decrytion support version recovery from @CosmicDan
https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405
next flash disable force enryption and format your data. then press reboot and select reboot recovery.
Sent from my [device_name] using XDA-Developers Legacy app
Mohd Haikal said:
im sorry for the typo. i mean decryption support not description.
download at here . find the decrytion support version recovery from @CosmicDan
https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405
next flash disable force enryption and format your data. then press reboot and select reboot recovery.
Click to expand...
Click to collapse
I didn't do the decryption supported one. The correct and original link for the working TWRP is https://forum.xda-developers.com/poco-f1/development/recovery-twrp-3-2-3-decryption-t3853004
Hi,
today I tried to install TWRP.
After exiting TWRP with reboot button, my phone reboots but is stuck on Mi logo (no Android logo in the bottom).
I have access to TWRP and to fastboot, but due to the fact that I'm really new to this, I don't know what I have to do.
TWRP was "twrp-3.0.2-2-kenzo.img"
Redmi Note 3 Pro (KATE)
In another thread I read, that I should use twrp 3.3.1 official, unfortunately I don't know if its possible to flash another twrp without having access to the phone -_-
Can somebody help me?
(I wanted to flash Lineage OS to have a newer Android version with actual Android security patch level)
InfectFTW said:
Hi,
today I tried to install TWRP.
After exiting TWRP with reboot button, my phone reboots but is stuck on Mi logo (no Android logo in the bottom).
I have access to TWRP and to fastboot, but due to the fact that I'm really new to this, I don't know what I have to do.
TWRP was "twrp-3.0.2-2-kenzo.img"
Redmi Note 3 Pro (KATE)
In another thread I read, that I should use twrp 3.3.1 official, unfortunately I don't know if its possible to flash another twrp without having access to the phone -_-
Can somebody help me?
(I wanted to flash Lineage OS to have a newer Android version with actual Android security patch level)
Click to expand...
Click to collapse
U using old. Use latest 3.1.1 latest twrp from official twrp site.
Put favourite rom and gapps in external sd card
Format data
Wipe data
Flash rom
Flash gapps
Reboot.
Black_Stark said:
U using old. Use latest 3.1.1 latest twrp from official twrp site.
Put favourite rom and gapps in external sd card
Format data
Wipe data
Flash rom
Flash gapps
Reboot.
Click to expand...
Click to collapse
Thank you for your answer, but how can I get the new twrp on the phone?
Last time I did it via my pc and command terminal, but I think this won't work now because I can't "see" the phone in Windows
InfectFTW said:
Thank you for your answer, but how can I get the new twrp on the phone?
Last time I did it via my pc and command terminal, but I think this won't work now because I can't "see" the phone in Windows
Click to expand...
Click to collapse
Download this latest twrp img. It works for both kenzo and kate.
https://dl.twrp.me/kenzo/twrp-3.3.1-0-kenzo.img
Go to ur current twrp.
Click install and Select image
Select image file
It will ask u where to install
Select "recovery" partition
Swipe to Install
Reboot to recovery
Now u have new latest twrp
.
---------- Post added at 02:16 PM ---------- Previous post was at 02:01 PM ----------
Download this Aex Pie Rom
https://drive.google.com/open?id=1gl4S9tMZP0QR8EgrtoVs810LUTt2gwJp
It comes with google playstore. So no need to install gapps. Separately.
Download and copy this Pie rom zip in external sd card.
Now boot in twrp.
First go to wipe.
Click format data
Type YES to format
It will decrypt ur data partition and format data partition.
Now go to wipe - advanced wipe
Select all system, data, cache, dalvik, internal sd and wipe. But Do not select microsd card. :laugh:
Now go to install option
Browse to micro sd storage and select Aex pie rom zip
Swipe to install pie rom zip.
Wait patiently.
And reboot it will take 3 to 4 mins to boot pie rom.
Black_Stark said:
Download this latest twrp img. It works for both kenzo and kate.
Go to ur current twrp
Click to expand...
Click to collapse
But how can I access my current TWRP?
InfectFTW said:
But how can I access my current TWRP?
Click to expand...
Click to collapse
U said u already have access to twrp.
To boot into twrp .
Press volume up and power together.
Press and Hold both buttons together. When phone vibrates immediately release both button with first vibration.
Phone will boot in twrp.
Black_Stark said:
U said u already have access to twrp.
To boot into twrp .
Press volume up and power together.
Press and Hold both buttons together. When phone vibrates immediately release both button with first vibration.
Phone will boot in twrp.
Click to expand...
Click to collapse
Sorry, it was a wrong information of my side.
With volume up and Power I boot in Mi flash.
InfectFTW said:
Sorry, it was a wrong information of my side.
With volume up and Power I boot in Mi flash.
Click to expand...
Click to collapse
If u cant boot into twrp. Then u have flash fastboot kate rom using Pc.
But u need to confirm if u have kenzo or kate.
Kenzo is rn3 pro
http://bigota.d.miui.com/V10.2.1.0....XM_20190114.0000.00_6.0_global_8a48e54fe3.tgz
Kate is rn3 special edition.
http://bigota.d.miui.com/9.3.28/kate_global_images_9.3.28_20190328.0000.00_6.0_global_7f425d08d9.tgz
Black_Stark said:
If u cant boot into twrp. Then u have flash fastboot kate rom using Pc.
But u need to confirm if u have kenzo or kate.
Kenzo is rn3 pro
http://bigota.d.miui.com/V10.2.1.0....XM_20190114.0000.00_6.0_global_8a48e54fe3.tgz
Kate is rn3 special edition.
http://bigota.d.miui.com/9.3.28/kate_global_images_9.3.28_20190328.0000.00_6.0_global_7f425d08d9.tgz
Click to expand...
Click to collapse
Okay I just checked it.
Volume Up + Power --> MI-Recovery 3.0
Volume Down + Power --> Fastboot
I have definitively Redmi Note 3 KATE.
Can you tell me how to flash the image I just downloaded (the KATE version)?
InfectFTW said:
Okay I just checked it.
Volume Up + Power --> MI-Recovery 3.0
Volume Down + Power --> Fastboot
I have definitively Redmi Note 3 KATE.
Can you tell me how to flash the image I just downloaded (the KATE version)?
Click to expand...
Click to collapse
First check if ur phone is unlocked or relocked.
Connect to pc.
Put phone in fastboot mode.
Type this commamd
fastboot oem device-info
If unlocked = true then ur phone is unlocked
If unlocked = false then its relocked.
Check it first.
---------- Post added at 06:52 PM ---------- Previous post was at 06:22 PM ----------
Use this guide.
This will give link and procedure to flash fastboot rom.
U already downloaded fastboot firmware.
U only need to download miflashing tool.
https://xiaomiflashtool.com/tutorial/use-xiaomi-flash-tool
Extract the fastboot rom zip on pc.
Put phone in fastboot mode and connect to pc.
Run miflash tool. U must have win 64bit pc.
In miflash tool u Browse and select fastboot extracted main folder.
Select "clean all" option which u see in bottom corner of miflash tool.
Now click flash.
And wait for flashing process to finish.
Then disconnect cable and power ur device to boot.
@Black_Stark
wow, good news, it worked
Thank you very much!!!
I have now MIUI 10 Global 9.3.28 Beta on my phone with Android 6.0.1 MMB29M and Android security patch level 2018-07-01
I want to give this smartphone my grandmother, but I think it would be better, if there would be a newer Android security patch level.
That's why I wanted to install Lineage OS 17 (with this youtube video: https://www.youtube.com/watch?v=diC5UfAWcEU)
What do you say about that, and which OS would you prefer to get a newer Android security patch level?
InfectFTW said:
@Black_Stark
wow, good news, it worked
Thank you very much!!!
I have now MIUI 10 Global 9.3.28 Beta on my phone with Android 6.0.1 MMB29M and Android security patch level 2018-07-01
I want to give this smartphone my grandmother, but I think it would be better, if there would be a newer Android security patch level.
That's why I wanted to install Lineage OS 17 (with this youtube video:
)
What do you say about that, and which OS would you prefer to get a newer Android security patch level?
Click to expand...
Click to collapse
Lineage sucks.
If u giving to grandma then stay on miui.
Black_Stark said:
Lineage sucks.
If u giving to grandma then stay on miui.
Click to expand...
Click to collapse
No worries about Android Security Patch Level from 2018?
Hi @Black_Stark,
I want to flash the new official MiUI version V10.2.1.0.MHRMIXM (https://*************/download/redmi-note-3-se/)
Do I need the fastboot or recovery ROM?
How should I flash it?
First install newest TWRP 3.3.1.0 (https://eu.dl.twrp.me/kenzo/) and then flash the new image via TWRP?
InfectFTW said:
Hi @Black_Stark,
I want to flash the new official MiUI version V10.2.1.0.MHRMIXM (https://*************/download/redmi-note-3-se/)
Do I need the fastboot or recovery ROM?
How should I flash it?
First install newest TWRP 3.3.1.0 (https://eu.dl.twrp.me/kenzo/) and then flash the new image via TWRP?
Click to expand...
Click to collapse
There is no 10.2 version for kate.
U already are on latest version.
Hi all,
I'm trying to install Havoc OS on my P20 lite (2018 model - ANE-LX1 8.0.0.0.135(C432)). My current version of EMUI is 8.0. So I need to install a A version of ARM and NOT AB.
The system image is
Havoc-OS-v3.1-20200202-ARM64A-GSI.img
I have TWRP 3.4.0 installed and working. PS, I have also tried this via fastboot (fastboot flash system Havoc-OS-v3.1-20200202-ARM64A-GSI.img.xz) with the same results
Before flashing the ROM and my GAPPS file (open_gapps-arm64-10.0-nano-20200808.zip). Via TWRP I wipe Dalvik/Cache/System/Data
Then I installed the ROM via TWRP install and selected .img install, there are no errors and the screen output says it is installed correctly.
Then I flashed the GAPPS mentioned above. After that I wipe Dalvik/Cache again.
And reboot....nothing happens. The phone boots back up and goes straight to TWRP again. It's like the ROM is not being initialized at all.
Any help would be appreciated.
MayhemIam said:
Hi all,
I'm trying to install Havoc OS on my P20 lite (2018 model - ANE-LX1 8.0.0.0.135(C432)). My current version of EMUI is 8.0. So I need to install a A version of ARM and NOT AB.
The system image is
Havoc-OS-v3.1-20200202-ARM64A-GSI.img
I have TWRP 3.4.0 installed and working. PS, I have also tried this via fastboot (fastboot flash system Havoc-OS-v3.1-20200202-ARM64A-GSI.img.xz) with the same results
Before flashing the ROM and my GAPPS file (open_gapps-arm64-10.0-nano-20200808.zip). Via TWRP I wipe Dalvik/Cache/System/Data
Then I installed the ROM via TWRP install and selected .img install, there are no errors and the screen output says it is installed correctly.
Then I flashed the GAPPS mentioned above. After that I wipe Dalvik/Cache again.
And reboot....nothing happens. The phone boots back up and goes straight to TWRP again. It's like the ROM is not being initialized at all.
Any help would be appreciated.
Click to expand...
Click to collapse
Hi,
1. On Oreo use this TWRP
https://mega.nz/#!Fgd0xa4R!1o5ejzDnkLJLG2tAZG-STtlJ4nnNCHfwwZdOlmOkrVw
2. You have to extract system.img (cca 1,2GB) from .xz package (unpack it on PC), then transfer it to SD .
Reboot to the TWRP > Wipe > Format Data > go back > Wipe > Advanced > Dalvik/Cache/System/Data > go back > flash system.img
Go back > Reboot> Recovery and do factory reset from Stock recovery (se the note bellow!)
P.S.: it's recommended install TWRP over eRecovery:
Copy downloaded TWRP file to the SD card, and also copy to card Stock ramdisk_recovery , download here: (for EMUI 8 only! )
https://mega.nz/#!04dG0JBb!hEgTk6DMKVDffttHiXGqa_YR_zG5UYwTMEi41KTkZi8
Since A8 and above you can not install TWRP over eRecovery from fastboot, follow instructions:
- install TWRP from fastboot , reboot to TWRP, select install image, and flash TWRP over eRecovery, go back, find recovery_ramdisk330 and flash it over recovery. Reboot system. After the boot screen appears in the recovery with the inscription "Your device is booting now ..." press and hold Volume Up
for 3 sec, device will boot to TWRP.
-Alf- said:
Hi,
1. On Oreo use this TWRP
https://mega.nz/#!Fgd0xa4R!1o5ejzDnkLJLG2tAZG-STtlJ4nnNCHfwwZdOlmOkrVw
2. You have to extract system.img (cca 1,2GB) from .xz package (unpack it on PC), then transfer it to SD .
Reboot to the TWRP > Wipe > Format Data > go back > Wipe > Advanced > Dalvik/Cache/System/Data > go back > flash system.img
Go back > Reboot> Recovery and do factory reset from Stock recovery (se the note bellow!)
P.S.: it's recommended install TWRP over eRecovery:
Copy downloaded TWRP file to the SD card, and also copy to card Stock ramdisk_recovery , download here: (for EMUI 8 only! )
https://mega.nz/#!04dG0JBb!hEgTk6DMKVDffttHiXGqa_YR_zG5UYwTMEi41KTkZi8
Since A8 and above you can not install TWRP over eRecovery from fastboot, follow instructions:
- install TWRP from fastboot , reboot to TWRP, select install image, and flash TWRP over eRecovery, go back, find recovery_ramdisk330 and flash it over recovery. Reboot system. After the boot screen appears in the recovery with the inscription "Your device is booting now ..." press and hold Volume Up
for 3 sec, device will boot to TWRP.
Click to expand...
Click to collapse
Hi Alf my man
So I am having a bit of trouble with your instructions. I am very sure it is my own fault! I just want to clarify the steps please. I have downloaded the 2 provided files you gave in the link.
1
Install TWRP via
"fastboot flash recovery_ramdisk TWRP-oreo-smart.img"
2
Boot into newly flashed TWRP and flash the 2 files again as specified
"....flash TWRP over eRecovery, go back, find recovery_ramdisk330 and flash it over recovery...."
3
Reboot after step 2 and go into TWRP again and perform the system.img install as per instructions via TWRP
"Reboot to the TWRP > Wipe > Format Data > go back > Wipe > Advanced > Dalvik/Cache/System/Data > go back > flash system.img
Go back > Reboot> Recovery and do factory reset from Stock recovery"
I take it that I need to install my GAPPS package as well in this stage?
4
After factory reset from stock recovery the OS should boot and initiate...
Thanks again man for your help!
MayhemIam said:
Hi Alf my man
So I am having a bit of trouble with your instructions. I am very sure it is my own fault! I just want to clarify the steps please. I have downloaded the 2 provided files you gave in the link.
1
Install TWRP via
"fastboot flash recovery_ramdisk TWRP-oreo-smart.img"
2
Boot into newly flashed TWRP and flash the 2 files again as specified
"....flash TWRP over eRecovery, go back, find recovery_ramdisk330 and flash it over recovery...."
3
Reboot after step 2 and go into TWRP again and perform the system.img install as per instructions via TWRP
"Reboot to the TWRP > Wipe > Format Data > go back > Wipe > Advanced > Dalvik/Cache/System/Data > go back > flash system.img
Go back > Reboot> Recovery and do factory reset from Stock recovery"
I take it that I need to install my GAPPS package as well in this stage?
4
After factory reset from stock recovery the OS should boot and initiate...
Thanks again man for your help!
Click to expand...
Click to collapse
I have done as instructed yet there is am issue at the last step. I can boot into stock recovery but when I try and do a Factory Reset via the menu the reset only goes to 9% and gives a large orange/red exclamation mark.....so it did not finish. When I try and reboot and load the OS it goes into a boot loop and that is it.
MayhemIam said:
I have done as instructed yet there is am issue at the last step. I can boot into stock recovery but when I try and do a Factory Reset via the menu the reset only goes to 9% and gives a large orange/red exclamation mark.....so it did not finish. When I try and reboot and load the OS it goes into a boot loop and that is it.
Click to expand...
Click to collapse
Okay, reboot system. You can perform factory reset later (if needed).
---------- Post added at 19:17 ---------- Previous post was at 18:56 ----------
Please provide me the link where you downloaded Havoc OS
-Alf- said:
Okay, reboot system. You can perform factory reset later (if needed).
---------- Post added at 19:17 ---------- Previous post was at 18:56 ----------
Please provide me the link where you downloaded Havoc OS
Click to expand...
Click to collapse
No it's stuck on a bootloop Alf :crying:
MayhemIam said:
No it's stuck on a bootloop Alf :crying:
Click to expand...
Click to collapse
Don't panic! IMO it's time to clean your phone , download Service ROM
https://androidhost.ru/5NX
Unpack .zip package, find dload file and copy it to the SD card (without unpacking it!). Then turn off the phone and flash ROM using three button combo.
(instruction can be found in file ReleaseDoc).
Important: the process will erase all your data and will lock again the bootloader!
I will now try to install Havoc 3.1A and I will let you know, okay?
-Alf- said:
Don't panic! IMO it's time to clean your phone , download Service ROM
https://androidhost.ru/5NX
Unpack .zip package, find dload file and copy it to the SD card (without unpacking it!). Then turn off the phone and flash ROM using three button combo.
(instruction can be found in file ReleaseDoc).
Important: the process will erase all your data and will lock again the bootloader!
I will now try to install Havoc 3.1A and I will let you know, okay?
Click to expand...
Click to collapse
Well I can still dload back to my old EMUI 8.0 OS! I just did it again and it works. I can get back into my OS no probs. I have done this about 6 times today, lol. I really do not want to lock my bootloader again as it took me a long time to get it unlocked!
Thnx for the reply!
MayhemIam said:
Well I can still dload back to my old EMUI 8.0 OS! I just did it again and it works. I can get back into my OS no probs. I have done this about 6 times today, lol. I really do not want to lock my bootloader again as it took me a long time to get it unlocked!
Thnx for the reply!
Click to expand...
Click to collapse
Also just for me to understand. I have EMUI 8.0 running then I can't upgrade to a Android 9 Custom ROM?
MayhemIam said:
Also just for me to understand. I have EMUI 8.0 running then I can't upgrade to a Android 9 Custom ROM?
Click to expand...
Click to collapse
I'm not sure I fully understand your question, you cannot upgrade to A9 , you can flash Custom ROM based on A9 (which requires A8 OS).
Btw, I tried flash Havoc 3.1, 3.0, tried several TWRP, no luck. Flashed system.img from fastboot, nothing. It seems A-only version doesn't work on ANE. I have no idea what the problem is...
(hehe, R.I.P. English )
-Alf- said:
I'm not sure I fully understand your question, you cannot upgrade to A9 , you can flash Custom ROM based on A9 (which requires A8 OS).
Btw, I tried flash Havoc 3.1, 3.0, tried several TWRP, no luck. Flashed system.img from fastboot, nothing. It seems A-only version doesn't work on ANE. I have no idea what the problem is...
(hehe, R.I.P. English )
Click to expand...
Click to collapse
OK I can't upgrade to EMUI 9 but I can upgrade to a custom ROM which has Android 9 (through AB partition)?
"...you can flash Custom ROM based on A9 (which requires A8 OS)." Which means I can upgrade to any custom ROM which has Android 9 / 10?
What is the difference then between the following?
ARM64A
ARM64AB
-Alf- said:
Okay, reboot system. You can perform factory reset later (if needed).
---------- Post added at 19:17 ---------- Previous post was at 18:56 ----------
Please provide me the link where you downloaded Havoc OS
Click to expand...
Click to collapse
Oh snap man, I only saw the last part of your post now.
I tried the following ROMS.
Most of them was downloaded from SourceForge man.
Havoc-OS-v3.0-20191225-ARM64A-Unofficial.img.xz
Havoc-OS-v3.1-20200202-ARM64A-GSI.img
I have tried others as well but they were ARM64AB....
MayhemIam said:
OK I can't upgrade to EMUI 9 but I can upgrade to a custom ROM which has Android 9 (through AB partition)?
"...you can flash Custom ROM based on A9 (which requires A8 OS)." Which means I can upgrade to any custom ROM which has Android 9 / 10?
Click to expand...
Click to collapse
For example:
Pixel Experience, ROM for the Huawei P20 Lite
Contributors
DarkJoker360
Source Code: https://github.com/DarkJoker360
ROM OS Version: 9.0 Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8 unlocked bootloader & twrp
MayhemIam said:
OK I can't upgrade to EMUI 9 but I can upgrade to a custom ROM which has Android 9 (through AB partition)?
"...you can flash Custom ROM based on A9 (which requires A8 OS)." Which means I can upgrade to any custom ROM which has Android 9 / 10?
What is the difference then between the following?
ARM64A
ARM64AB
Click to expand...
Click to collapse
What is the difference then between the following?
ARM64A
ARM64AB
OK so the answer is
Use ARM64xA - when your phone is using Android 8.0 (EMUI 8.0)
Use ARM64xAB - when your phone is using Android 9 (EMUI 9.1)
-Alf- said:
For example:
Pixel Experience, ROM for the Huawei P20 Lite
Contributors
DarkJoker360
Source Code: https://github.com/DarkJoker360
ROM OS Version: 9.0 Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8 unlocked bootloader & twrp
Click to expand...
Click to collapse
Hi Alf,
I have abandoned ship to get HavocOS on my device
But I'm trying now the following AOSP Android 10 Q
https://www.getdroidtips.com/android-10-huawei-p20-lite/
I'm going to try and use this TWRP (twrp-3.4.0-0-anne.img)
Will let you know how it goes!
MayhemIam said:
Hi Alf,
I have abandoned ship to get HavocOS on my device
But I'm trying now the following AOSP Android 10 Q
https://www.getdroidtips.com/android-10-huawei-p20-lite/
I'm going to try and use this TWRP (twrp-3.4.0-0-anne.img)
Will let you know how it goes!
Click to expand...
Click to collapse
Getdroidtips? Really reliable source
I finally installed Havoc 3.8ab (latest version), I'm disappointed . No Music player, no Sound recorder (=no call recording) , no email client, Calendar etc. etc....
I think you should upgrade to EMUI 9.1 and try AB versions , hm?
-Alf- said:
Getdroidtips? Really reliable source
I finally installed Havoc 3.8ab (latest version), I'm disappointed . No Music player, no Sound recorder (=no call recording) , no email client, Calendar etc. etc....
I think you should upgrade to EMUI 9.1 and try AB versions , hm?
Click to expand...
Click to collapse
I would have really like to test an earlier version then which did not have all those missing features! It seemed to me that customization was very good on the ROM....
facepalm on Get Droid Tips....because the only tip I got from them is more than 12 hrs of trying to implement their crappy advice!
Ok I will upgrade to EMUI 9 then Alf.
Thanks for all the advice man and flashing along side me
Try Havoc 2.9 for Oreo , the Rom is just perfect . (own experience, tested on 8.0.0.126 )
INSTALL ON CLEAN OS (if your current OS is Custom ROM, flash stock ROM).
Download and unpack on your PC Havoc 2.9 arm64a:
https://sourceforge.net/projects/ha...90914-phhgsi_arm64_a-Official.img.xz/download
Flash extracted Havoc.img from fastboot using command
fastboot flash system (file name).img
Before booting up the ROM, you will need to perform a factory reset in stock recovery!!!
Reboot system.
In the Phh-Treble Settings-Huawei features, select fast charge 4000mA and Enable blurry UI workaround
If you want to install GAPPs or Magic (Magic v20.3 works without problems) , use TWRP by "ascuccio" (own experience), download link:
https://mega.nz/#!EsdTgYqZ!2QX9wgAhA653Dp2MkDTLPHa3tmFdNqmC5CDDHB-7f5Y
Screenshots:
https://mega.nz/#!1tlnlSyS!3SdAkZwf9miFVMkEXiq5Ypy3PcTOhuuohywk1ta-eXI
MayhemIam said:
Hi all,
I'm trying to install Havoc OS on my P20 lite (2018 model - ANE-LX1 8.0.0.0.135(C432)). My current version of EMUI is 8.0. So I need to install a A version of ARM and NOT AB.
The system image is
Havoc-OS-v3.1-20200202-ARM64A-GSI.img
I have TWRP 3.4.0 installed and working. PS, I have also tried this via fastboot (fastboot flash system Havoc-OS-v3.1-20200202-ARM64A-GSI.img.xz) with the same results
Before flashing the ROM and my GAPPS file (open_gapps-arm64-10.0-nano-20200808.zip). Via TWRP I wipe Dalvik/Cache/System/Data
Then I installed the ROM via TWRP install and selected .img install, there are no errors and the screen output says it is installed correctly.
Then I flashed the GAPPS mentioned above. After that I wipe Dalvik/Cache again.
And reboot....nothing happens. The phone boots back up and goes straight to TWRP again. It's like the ROM is not being initialized at all.
Any help would be appreciated.
Click to expand...
Click to collapse
You have tried to decrypt the data?
https://forum.xda-developers.com/honor-7x/development/mod-decrypt-data-emui-8-t3765403
Dego02 said:
You have tried to decrypt the data
Click to expand...
Click to collapse
No comment...