Related
Hi, urgent help needed. I feel like bump into a wall or something.
The situation is, I rooted my TF201 with viperboy tools. Today I tried to OTA the ICS update, and had a triangular sign.
I tried to follow the instruction of [Guide] ICS OTA Solution to Yellow Triangle, but at the step of flashing back stock rom, I got another triangular sign.
The thing I did:
1, download the stock rom my of region.
2. unzip the zip file. and put it in my sdcard of TF201
3. turn of the device. Turn the the device with volume - pressed.
4. Then quickly press volume+ when I see 2 lines of very small Englist showed up. (is this correct)
5. anyway, it began to run something, only that 10seconds later, a triangular sign came up.
I can't flash back the stock rom. Is there anything I did wrong or I didn't do?
Please HELP!!!
All right, I've got this figured out. How stupid I am, taking the long route.
All I need to do is just put the zip file in the sdcard and turn on the device, go to setup and use the default update procedure.
Problem solved. what a relief.
Where did you find that setup? Or any "default update procedure"?
Update checker tells me I am up to date.
There's another zip inside the downloaded zip. I placed both on SD card and even on internal storage, can't seem to get that working.
Meanee said:
Where did you find that setup? Or any "default update procedure"?
Update checker tells me I am up to date.
There's another zip inside the downloaded zip. I placed both on SD card and even on internal storage, can't seem to get that working.
Click to expand...
Click to collapse
just place .zip(the one inside the downloaded zip) on SD card, and when u insert SD card, there will be a sign at right corner of the screen.
It's my first time to write this thread.
Could you do me a small favor?
I'am living in Japan and using tf201(JP).
13th March. My Eee Pad Prime is updated to v.9.4.2.17(ICS) from Honeycomb.
After updating, my application was out of order. because of hdmi output and camera module.
I tried to get back to Honeycomb,
but It's failed and my tf201 was bricked.
I got a A/S and repair it. - (it backs ICS version.)
and now I am waiting for new update almostly 2month.
I knew new update has been released. but I couldn't get it.
I can see the new firmware file at ASUS support site.
I don't know how to update it.- I mailed asus support center but I didn't get answer(three weeks ago).
Setting - About tablet - System Firmware Update - Check Update
doesn't work. (There is no update available for your device currently.)
Could you please teach me how to update my tf201 to v.9.4.2.22(JP)?
I looked for method but I couldn't find it.
Just download the update from Asus home page and put it in your internal storage than reboot and you will see a message software update avaliable just clic
Thank you very much!!
rogeriok said:
Just download the update from Asus home page and put it in your internal storage than reboot and you will see a message software update avaliable just clic
Click to expand...
Click to collapse
I tried to update couple of times.
But I didn't try to put update file 'folder' state.
I just did put a file zip and unzip one time-It's also zip file.
I unzipped two times and I could see folder file and I put it in internal storage.
Jaesung Moon said:
I tried to update couple of times.
But I didn't try to put update file 'folder' state.
I just did put a file zip and unzip one time-It's also zip file.
I unzipped two times and I could see folder file and I put it in internal storage.
Click to expand...
Click to collapse
I think your prime's serial must be unknow right?so you won't receive ota updates,you must do it this way everytime,tto me is the same
This is how to update without external SDcard.
Does your existing JP firmware have a choice for English language?
Hope you get it working!
I am rooted on .21.
I backed up via RootKeeper and went ahead to install the update. On installation after rebooting, an android logo came up with a red triangle with an exclamation point in the middle.
My prime rebooted and I got a notification saying update failed and my firmware was restored back to .21 with my root intact.
Now when I check for an update, my Prime says no update was found. I have tried rebooting several times too.
Any ideas?
EDIT:
I am going to try the manual update on this manual:
http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF201/e7203_TF201_Update_SOP.pdf
Remember to unzip and add the zip that you unzipped to the Micro SD.
I got impatient and did Method 2 on this tutorial: http://forum.xda-developers.com/showthread.php?t=1622628
And since I lost root because I was reckless: http://forum.xda-developers.com/showthread.php?t=1706588
I hope this thread helped everyone. I can now say it is solved!
someone can give me a turtial to install the 28 update manually?
gtrs36 said:
someone can give me a turtial to install the 28 update manually?
Click to expand...
Click to collapse
http://usa.asus.com/Eee/Eee_Pad/Eee_Pad_Transformer_Prime_TF201/#download
Download the correct SKU
Copy the file over to the root directory I believe....
But this will erase all your data I think. Which is why I do not want to do that.
Possible Solution!
Okay. So, I was having the same issue. I redownloaded the US version and put on root of my microsd card with same result. Now I was getting frustrated. Just for sh1tz and giggles, I put a copy of the firmware in the root of my sdcard (i left the original in the root of my microsd card also). I then took the microsd card out and put back in. This time i got the triangle notification in the lower right corner notifying me of the update as usual. I pressed on the triangle and it showed TWO files! I picked the latest one by time and date because that is the one I put in the SDCARD root location and....wait for it.....VOILA....it worked. Don't ask me why!
cyiam40 said:
Okay. So, I was having the same issue. I redownloaded the US version and put on root of my microsd card with same result. Now I was getting frustrated. Just for sh1tz and giggles, I put a copy of the firmware in the root of my sdcard (i left the original in the root of my microsd card also). I then took the microsd card out and put back in. This time i got the triangle notification in the lower right corner notifying me of the update as usual. I pressed on the triangle and it showed TWO files! I picked the latest one by time and date because that is the one I put in the SDCARD root location and....wait for it.....VOILA....it worked. Don't ask me why!
Click to expand...
Click to collapse
Would this not allow you to root?
cyiam40 said:
Okay. So, I was having the same issue. I redownloaded the US version and put on root of my microsd card with same result. Now I was getting frustrated. Just for sh1tz and giggles, I put a copy of the firmware in the root of my sdcard (i left the original in the root of my microsd card also). I then took the microsd card out and put back in. This time i got the triangle notification in the lower right corner notifying me of the update as usual. I pressed on the triangle and it showed TWO files! I picked the latest one by time and date because that is the one I put in the SDCARD root location and....wait for it.....VOILA....it worked. Don't ask me why!
Click to expand...
Click to collapse
I downloaded the US firmware, put it on my micro SD root, my /sdcard folder, my / folder, and still nothing. Even after rebooting. What could be the problem?
Plus checking for update yields nothing.
See root posts, SparkyM3 has fixed that. Rooted just fine.
xTRICKYxx said:
I downloaded the US firmware, put it on my micro SD root, my /sdcard folder, my / folder, and still nothing. Even after rebooting. What could be the problem?
Plus checking for update yields nothing.
Click to expand...
Click to collapse
I am in the same boat at the moment, factory data reset didn't help either so don't bother.
So how the hell do we update to .28?!?!
Is there anything we can do to redownload the update and try reinstalling?
xTRICKYxx said:
So how the hell do we update to .28?!?!
Is there anything we can do to redownload the update and try reinstalling?
Click to expand...
Click to collapse
I just gonna leave my tablet for a day and see if its cause the server is caching that we did a update. I guess if worse comes to worse we could do a downgrade, but too much of a hassle for me at the moment.
HiddenSanctum said:
I just gonna leave my tablet for a day and see if its cause the server is caching that we did a update. I guess if worse comes to worse we could do a downgrade, but too much of a hassle for me at the moment.
Click to expand...
Click to collapse
That's what I've been thinking too. I may do a hard reset, root, use rootkeeper, and then go to .28....
Lots of time and energy and I'd rather not do that!
xTRICKYxx said:
That's what I've been thinking too. I may do a hard reset, root, use rootkeeper, and then go to .28....
Lots of time and energy and I'd rather not do that!
Click to expand...
Click to collapse
I already did a hard reset, no luck
You have to unzip the download which should contain another zip, that zip goes onto your internal or micro SD card.
Problem Solved
I found the problem. You need to unzip the manual update file first and you'll get another zip file. Put that into your microSD card and then you should see the new firmware detected icon.
Problem has to do with the fact that we edited something in the system files I believe.
Once you update it to .28 You'll need this to root again
More information on the issue: http://forum.xda-developers.com/showthread.php?t=1707362&page=1
Hope this helps!
From failed .28 update to SUCCESS! (But now must reroot)
Downloaded the update manually from support.asus.com (enter tf201 and find ur appropriate version... For me US), and download it to your removable/external microsd card. Extract it to the root directory of the card, and rename it to EP201_SDUPDATE.zip (***if u don't see the .zip extension, don't add it - this means the file manager you're using doesn't display extensions, and if you add ".zip" the filename will end up as EP201_SDUPDATE.ZIP.ZIP which won't work)
Once you have the file extracted, renamed, and in the right place, hold down "volume down" + power, and dont let go until it reboots AND you see text at the top of the black screen... Then press "volume up" within 5 seconds to install the update. You should see the "Andy with blue nuclear fission ball" animation as the update runs.
Now go find the .28 root method, reroot, and party on.
Btw, I found this in the "bricked after update to .28" thread, but it works for failed updates as well. Hope this helps.
YOU NEED TO UNZIP THE INITIAL .ZIP YOU DOWNLOAD. THE FILE YOU NEED WILL NOT HAVE UPDATELAUNCHER IN THE NAME! Inside of that is the .zip you want. You can unzip that or not. I can confirm it works both ways.
Put the .zip within a .zip on the root of /Removable/microsd/ or /sdcard/ . Safely remove you sd, then reinsert if you choose to use your removable card. I did not have to reboot.
Sent from my Transformer Prime TF201 using Tapatalk
I'm glad people found out our mistakes! I went a little different route and did this:http://forum.xda-developers.com/showthread.php?t=1622628
I did Method 2 since I did a hard reset desperately. I will now re-root using this:
http://forum.xda-developers.com/showthread.php?t=1706588
xTRICKYxx said:
I am rooted on .21.
I backed up via RootKeeper and went ahead to install the update. On installation after rebooting, an android logo came up with a red triangle with an exclamation point in the middle.
My prime rebooted and I got a notification saying update failed and my firmware was restored back to .21 with my root intact.
Now when I check for an update, my Prime says no update was found. I have tried rebooting several times too.
Any ideas?
EDIT:
I am going to try the manual update on this manual:
http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF201/e7203_TF201_Update_SOP.pdf
Remember to unzip and add the zip that you unzipped to the Micro SD.
I got impatient and did Method 2 on this tutorial: http://forum.xda-developers.com/showthread.php?t=1622628
And since I lost root because I was reckless: http://forum.xda-developers.com/showthread.php?t=1706588
I hope this thread helped everyone. I can now say it is solved!
Click to expand...
Click to collapse
OK some guys just like to complain. Just read the forums and nd have some patience.
There a lot of smart people here, they will figure out your problem.
I did the manual d/l and then rooted with sparky method, worked like a charm! Thanks for the support fellow XDA'ers!
Can someone please post a copy of the ORIGINAL build.prop from the .21 firmware please. thanks
Sent from my Transformer Prime TF201 using xda premium
A few months ago, I made a help thread on how to get my phone rooted after some roadblock. However, I didn't get any type of help whatsoever. So I decided to remain on the phone's base firmware for eternity. However, I decided to try again. Anyways, below is the opening post I made for that thread. I only included the parts I still have trouble on.
(i made sure to do a backup)
Let me sum up what I have done:
I've managed to follow a guide on a wiki(I lost the link however, since I ATTEMPTED to give up on this) that involved me downgrading my firmware, then do some steps to install cyanogen 1.4. Afterwards, I got to step that required me to rename some file to update.zip. I followed that step and noticed my computer didn't convert the file to a zip file(it remained as a img file) but continued anyway while finding that odd.
Afterwards, cyanogen tells me that it cannot find the zip file. I've search most of google and a bit of this site, and i've seen various solutions that failed me such as:
-renaming the update.zip to update
-using android sdk(which i have no clue on how to use)
So if you managed to read my long and boring story, let me ask one question:
How do I get my phone back to normal if rooting is impossible at this point?
Click to expand...
Click to collapse
the file staying an image file though you renamed it usually comes from windows hiding known file types' extensions. you can turn that off in your file browser through Tools -> Folder Options and somewhere over there there should be a checkbox that says "hide known extensions" or something.
(that means that if the file was originally called abc.img it is now abc.zip.img only the .img part is hidden).
the link you had to a wiki is probably this one:
http://wiki.cyanogenmod.com/wiki/TMobile_myTouch_3G:_Rooting
or any other one from this page:
http://wiki.cyanogenmod.com/wiki/HTC_Magic
good luck
Thanks to that, i've gotten a little farther. Hoewever, i'm stuck at flashing a recovery. it now says: FAILED (remote: not allow)
What is this?
EDIT: After hours of searching, it seems that this: http://forum.xda-developers.com/showthread.php?t=548218 is the answer. However, since my SD cards cannot be gold carded(since I need a gold card for this solution), i'm pretty much screwed until I find a compatible SD card. Thanks for trying though.
Greetings All,
I am attempting to update my TF201 to Jelly Bean but am not having any luck. The OTA update failed initially, and now when I search for updates, the tablet says there are none. I then decided to get the update file manually, but I can't get my tablet to discover that the update is present and ready to be installed. Can't figure out what I am doing wrong. Everything I have read thus far says to download the update, extract the zip file (resulting in another zip file with a slightly different name - I am on the WW version of the tablet BTW) to the root of the tablets internal storage, and reboot the device. Once it boots up again, it should detect the update and prompt me to install it.
Regardless of whether I put it on the internal storage, or on the external SD card, I cannot get this thing to detect the update and prompt me to install. I have also attempted extracting the second zip file so I end up with a META-INF folder and the blob. Putting this in the root of the internal storage and the root of the SD card didn't work either.
The device is currently rooted, and has been reset to factory several times during this process.
Any suggestions? Have I missed something totally obvious here?
Thanks!
Edit: Currently running ICS, on the stock 9.4.2.28 build from Asus.
Can't post links right now but trekest has a method that worked for me
Sent from my Zio using xda app-developers app
McJesus15 said:
Can't post links right now but trekest has a method that worked for me
Sent from my Zio using xda app-developers app
Click to expand...
Click to collapse
This one?
http://forum.xda-developers.com/showpost.php?p=32099246&postcount=154
Followed it to the letter. Rebooted the tablet once I had done everything specified via shell and the tablet simply rebooted. Still on ICS. Tried to replace the build.prop as mentioned at the bottom (after backing up my existing one of course), and it still simply rebooted.
Update: After a few more reboots, the tablet detected the update file. Unfortunately, the dlpkgfile I got was the US version (I need the WW version). An alternate download link from the one listed in the link above also gave me the US version (even though the poster said it was WW). Once I find the WW version, I should be able to get this update wrapped up.
I had the same problem.
In my case the solution was to copy the extracted ZIP file to the root folder, rename it to 'dlpkgfile' then reboot.
When it restarted, I then had the prompt that a system update was available but on checking the root folder, the 'dlpkgfile' file had been deleted so I repeated the process above, then clicked the update notification & away it went & did the update normally.
Hope that helps.
magrath1 said:
I had the same problem.
In my case the solution was to copy the extracted ZIP file to the root folder, rename it to 'dlpkgfile' then reboot.
When it restarted, I then had the prompt that a system update was available but on checking the root folder, the 'dlpkgfile' file had been deleted so I repeated the process above, then clicked the update notification & away it went & did the update normally.
Hope that helps.
Click to expand...
Click to collapse
Seems to have worked. Thanks!
I backed up my root from ICS, but when I started VooDoo again, my root backup was gone. Is there a working root tool available yet? Or is JB rooting still being worked on? I've been poking around the forum but have only turned up rooting tools that work for ICS thus far.
dochouse said:
Seems to have worked. Thanks!
I backed up my root from ICS, but when I started VooDoo again, my root backup was gone. Is there a working root tool available yet? Or is JB rooting still being worked on? I've been poking around the forum but have only turned up rooting tools that work for ICS thus far.
Click to expand...
Click to collapse
Yeah. Same here.
Apparently it can be done by rolling back to an old ICS version, updating to .28, backing up root with RootKeeper, re-flashing JB & restoring root. Seems like a lot of trouble though.
Think I'll just wait until someone meare learned than I comes up with a working exploit...I'm sure it won't be too long.
magrath1 said:
I had the same problem.
In my case the solution was to copy the extracted ZIP file to the root folder, rename it to 'dlpkgfile' then reboot.
When it restarted, I then had the prompt that a system update was available but on checking the root folder, the 'dlpkgfile' file had been deleted so I repeated the process above, then clicked the update notification & away it went & did the update normally.
Hope that helps.
Click to expand...
Click to collapse
I just tried doing this several times and on my tablet the update starts but then at about one third in it stops and fails. I have repeated the process 5 times using all the suggestions and even re downloading the file and same thing, I am just going to wait but so far no OTA available yet when I do the firmware update check it just tells me no update available for my device .
Finally tried using Baxbuda's manual method by downloading the firmware from Asus then renaming the file EP201_SDUPDATE.zip and copying the file to my MicroSD card and started the update using the power + vol. down, then releasing the power button and pressing the vol. up and it completed the upadate and I now have JB and so far it is fast and smooth with no issues to report
Jesse6749 said:
I just tried doing this several times and on my tablet the update starts but then at about one third in it stops and fails. I have repeated the process 5 times using all the suggestions and even re downloading the file and same thing, I am just going to wait but so far no OTA available yet when I do the firmware update check it just tells me no update available for my device .
Finally tried using Baxbuda's manual method by downloading the firmware from Asus then renaming the file EP201_SDUPDATE.zip and copying the file to my MicroSD card and started the update using the power + vol. down, then releasing the power button and pressing the vol. up and it completed the upadate and I now have JB and so far it is fast and smooth with no issues to report
Click to expand...
Click to collapse
Tried both of the reported method and I had no luck at all. With the Power+vol down. then releasing power and then pressing vol.up... when is this done?
The following worked for me.
-------------------------------------------------------
To update to new firmware versions for the tablet.
Download the appropriate update from ASUS support website for the TF201 Transformer Prime Tablet
Extract the zip file within the downloaded zip file from ASUS support.
Get an SD card of some sort.
Create the Folder \ASUS
Create the folder \ASUS\Update within the ASUS folder
Copy and Paste the US-epad-user-x.x.x.x.zip file into the \ASUS\Update folder.
Plug the SD card into the Tablet. It will show a triangle with ! in the system area.
Tap on it to start the update process.
anyone managed to root a tf201 with the latest asus jellbean rom on? seems a real pain to have to flash down to the factory rom, unlock, root then install a custom rom.
when i say "real pain" i mean, it's a heap more hassle than trying out a few custom roms on my i9300!