MUST READ
• Your warranty is now void
• I am not responsible for bricked devices,dead sd cards
• Thermonuclear war, or you getting fired because the alarm app failed.
• Please do some research if you have any conserns about features included in this ROM
• Before flashing it YOU are choosing to make this modifications, and if you point the finger at me for messing up your device,I will laugh at you.
INTRODUCTION
• Kitkat Deodexed is a stock rom fully deodexed, made for core prime's (G360H) users.
• Based on G360HDDU0APA3 firmware.
• Android 4.4.4
ROM FEATURES
• Fully deodexed
. Switch to my kernel ( Vegito Kernel 1.2 )
• Pre-rooted
• Added busybox
. New Google Bootanimation 6.0
• Removed bloatwares
• Added build.prop tweaks
• Added 4.4.4 songs
INSTALATION GUIDE
Make sure you're using TWRP (Kitkat) or CWM (Kitkat)
1. Download Kitkat Deodexed G360H
2. Place it on the sd card.
3. Reboot on TWRP/CWM
4. Go to Wipes > advanced wipe > then wipe: Dalvik cache/ System/ Cache/ Data.
5. Go to Mount > disable everything (the update-script mount it for itself)
7. Go to Install > Select the correctly Storage and choose Kitkat_Deodexed_G360H.zip > Swipe to install
8. Wait the installatin....
9. Reboot
First boot takes more time...
DOWNLOAD
Kitkat Deodexed G360H: ( StockPrerooted )
THANKS
• @SuperR. - The Best Kitchen
If I forgot your name, please tell me. I'll add here.
Reserved
@Dreamstar. could you modify systemui or settings or other apps in your rom????
Sent from my SM-G360H using Tapatalk
well its based on stock so no changes but it will be fast as stock and ill add many features to it
@Dreamstar - Can you please tell, how much difference is there in free internal storage after installing this ROM? Which apps were removed exactly?
AtomR said:
@Dreamstar - Can you please tell, how much difference is there in free internal storage after installing this ROM? Which apps were removed exactly?
Click to expand...
Click to collapse
Umm... the internal storage doesn't change, because the ROM is installed in /system partition, and our internal storage is in /data, so... still 5,5GB as usual
Also, he mentioned that this just a deodexed-stock ROM, so no changes but easier for theme modding, etc...
doesntexits said:
Umm... the internal storage doesn't change, because the ROM is installed in /system partition, and our internal storage is in /data, so... still 5,5GB as usual
Also, he mentioned that this just a deodexed-stock ROM, so no changes but easier for theme modding, etc...
Click to expand...
Click to collapse
Ah, OK. He mentioned, "Removed bloatwares" under ROM FEATURES. So, I thought, samsung apps were removed. lol Thanks
AtomR said:
Ah, OK. He mentioned, "Removed bloatwares" under ROM FEATURES. So, I thought, samsung apps were removed. lol Thanks
Click to expand...
Click to collapse
Oh yes, Sammy apps are removed (forgot this )
doesntexits said:
Oh yes, Sammy apps are removed (forgot this )
Click to expand...
Click to collapse
Haha. Then it's great. That's what I was asking. :good:
lol uploaded 94% then stuck
Dreamstar said:
lol uploaded 94% then stuck
Click to expand...
Click to collapse
Lol, it happens. Try uploading it again.
Will be there the feature "Fullscreen Caller Photo?"
Dreamstar said:
MUST READ
• Your warranty is now void
• I am not responsible for bricked devices,dead sd cards
• Thermonuclear war, or you getting fired because the alarm app failed.
• Please do some research if you have any conserns about features included in this ROM
• Before flashing it YOU are choosing to make this modifications, and if you point the finger at me for messing up your device,I will laugh at you.
INTRODUCTION
• Kitkat Deodexed is a stock rom fully deodexed, made for core prime's (G360H) users.
• Based on G360HDDU0APA3 firmware.
• Android 4.4.4
ROM FEATURES
• Fully deodexed
. Switch to my kernel ( Vegito Kernel 1.2 )
• Pre-rooted
• Added busybox
• Removed bloatwares
• Added build.prop tweaks
• Added 4.4.4 songs
INSTALATION GUIDE
Make sure you're using TWRP (Kitkat) or CWM (Kitkat)
1. Download Kitkat Deodexed G360H
2. Place it on the sd card.
3. Reboot on TWRP/CWM
4. Go to Wipes > advanced wipe > then wipe: Dalvik cache/ System/ Cache/ Data.
5. Go to Mount > disable everything (the update-script mount it for itself)
7. Go to Install > Select the correctly Storage and choose Kitkat_Deodexed_G360H.zip > Swipe to install
8. Wait the installatin....
9. Reboot
First boot takes more time...
DOWNLOAD
Kitkat Deodexed G360H: ( Comming Soon )
THANKS
• @SuperR. - The Best Kitchen
If I forgot your name, please tell me. I'll add here.
Click to expand...
Click to collapse
Hey! Please upload the ROM my stock is messed up PLEASE do it FAST!!!
Does this work on g360hu?
You Can Try @JustFrame and @efgpho3nix my internet connection did,nt work properly so u have to wait....
Dreamstar said:
You Can Try @JustFrame and @efgpho3nix my internet connection did,nt work properly so u have to wait....
Click to expand...
Click to collapse
Oh okay, Mr. Dreamstar. I'll try this when the links come. Thankyou. ☺
Why to wipe the /data partition that's not an update it's the same version ?!
Link Added
Dreamstar said:
Link Added
Click to expand...
Click to collapse
@Dreamstar
Have this rom have bugs in bt or other?
Sent from my SM-G360H using XDA Free mobile app
nop but if u find anything you can tell me
Related
Hi finally Karbonn S5 aka Cherry Mobile SkyFire 2.0 gets their 1st Rom
Yes!!! it's the fluid MIUI V5
This is not developed by me I have just posted it, it was ported by facebook group for cherrymobile I just helped along with others
Requeriment:
- Root
- CWM
- The Zip file
Click to expand...
Click to collapse
Installation:
- Copy the zip to your sd card.
- Reboot into CWM recovery.
- If this is the first time you install this (came from different
ROM) then make full wipe:
* Wipe data/factory reset
* Wipe cache
* Advanced / wipe dalvik cache
- Choose install zip from sdcard and find the zip you put in there
- Reboot phone and Enjoy.
Click to expand...
Click to collapse
Bunso Rom v1.1 Now up!
MIUI V5 3.8.9
Everything Works!
Disclaimer: You do this at your own risk. I will not be held responsible if your phone explodes or nuclear war.
Click to expand...
Click to collapse
Instructions:
Download and Copy to External SD card
Turn off phone and enter CWM Recovery (hold volume up botton and power button, it'll display green screen then after a few seconds it'll display red screen then release)
Wipe data/factory reset, Format System, Wipe Dalvik Cache
Install from SD Card, Select Bunso Rom 1.1
Click to expand...
Click to collapse
Download Link:
https://mega.co.nz/#!tdhxDKZS!AsWtVgVivpnbajVoNRDlVQK9ph4WPiKIvKePfGY6YVU
Click to expand...
Click to collapse
Changelog:
v1.1
Aroma Installer
Fixed Transition animation
Added Google Play Market App (credits to Ansh Sahajpal)
Replaced Chinese Root Explorer with updated English version
edited build.prop
Click to expand...
Click to collapse
v1
Initial Release
Test Version
http://
www.mediafire.com/?99y46rq0y38ar39
Click to expand...
Click to collapse
CREDITS:
CHINES DEVELOPER FOR DEVELOPING ROM
AGILI For fixing camera & Testing it 1st
Micheal.the.don for his contributions
Tested and reported successful by Arman Agili Esma on facebook
Screenshots
reserved
reaerved
Thanks. Finally a ROM for titanium s5. Hopefully you can get the camera working. Then I will give it a shot. Dual sim functionality working in this ROM?
Sent from my Titanium S5 using Tapatalk 4
diamondX04HT said:
Thanks. Finally a ROM for titanium s5. Hopefully you can get the camera working. Then I will give it a shot. Dual sim functionality working in this ROM?
Sent from my Titanium S5 using Tapatalk 4
Click to expand...
Click to collapse
yup but outgoing needs to b set once, that is you can receive texts calls and everything on both SIM but outgoing is allowed only from one, which SIM you wanna use u can preset it in settings for calls, texts, data. btw it's beta version wit few issues report your errors here
What about wifi? Is it working?
Downloading
zeyaan said:
Hi finally Karbonn S5 aka Cherry Mobile SkyFire 2.0 gets their 1st Rom
Yes!!! it's the fluid MIUI V5
THIS IS BETA VERSION WITH FEW ERRORS
This is not developed by me I have just posted it, it's developed by a Chinese developer
Requeriment:
- Root
- CWM
- The Zip file
Installation:
- Copy the zip to your sd card.
- Reboot into CWM recovery.
- If this is the first time you install this (came from different
ROM) then make full wipe:
* Wipe data/factory reset
* Wipe cache
* Advanced / wipe dalvik cache
- Choose install zip from sdcard and find the zip you put in there
- Reboot phone and Enjoy.
What's working:
- Touchscreen
- Bluetooth
- GSM
- Physicall buttons
- SD Card
- Gallery and Music Work
- Rotation sensor, compass
- Widgets
- Installing Apps
What's not working:
- Brightness( works perfectly after 1st reboot)
- Camera
-anything els? please report it in comments
Downloads:
Beta 1(camera issue)
Beta 2(pretty much working, you tel me what's not working)
CREDITS:
CHINES DEVELOPER FOR DEVELOPING ROM
AGILI For fixing camera & Testing it 1st
Micheal.the.don for his contributions
Tested and reported successful by Arman Agili Esma on facebook
Screenshots
Click to expand...
Click to collapse
Just Downloading now
Hope for the best
Updated OP
Thanks a lot
Hey Great work on the Rom, But Could you post a few Screen shots Of the rom,and a description of how to get back to the original rom if,If something went wrong.
Thanks
@~un
this ro is working but there is problem with the process media
Display Problem
I installed this ROM, Love it. But i am getting blurred screen display..... Pls help
ahuja_p said:
I installed this ROM, Love it. But i am getting blurred screen display..... Pls help
Click to expand...
Click to collapse
dont worry just go to>> Settings >> Display >> Font Size and change it accordingly n check if it gets clear display
Tried that, doesnt work.......
ahuja_p said:
Tried that, doesnt work.......
Click to expand...
Click to collapse
Method 1
* Wipe data/factory reset
* Wipe cache
* Advanced / wipe dalvik cache
- Choose install zip of Stock Rom from sdcard and find the zip you put in there
- Reboot phone and Enjoy.
Display Bug
I tested this ROM on my Archos 50 Platinum (aka Karbonn Titanium S5 aka Cherry Mobile Skyfire 2.0), and I think it was perfect except for one point that makes it unusable. The display is completely degraded at each exit from standby mode, with no alternative but to reboot the device.
The problem is known? Is there a solution?
Fred.
ahuja_p said:
I installed this ROM, Love it. But i am getting blurred screen display..... Pls help
Click to expand...
Click to collapse
Exactly the same problem, white blurry lines. :s
mufti.arfan said:
Exactly the same problem, white blurry lines. :s
Click to expand...
Click to collapse
did u try replacing boot.img from nemisess Rom? unfortunately I too have a same problem. the New batch of phones have problems with the blurry screen on lock.
zeyaan said:
did u try replacing boot.img from nemisess Rom? unfortunately I too have a same problem. the New batch of phones have problems with the blurry screen on lock.
Click to expand...
Click to collapse
I flashed the stock rom back. Kernel related problem.
Sent from my Micromax A110 using xda app-developers app
Blurry Lines Fixed
http://forum.xda-developers.com/showthread.php?p=46821548
Cleoo
is development still active?
DISCLAIMER:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WARNING: KNOX GET VOIDED!
This rom is for J500FN model.I don't know if it does work on J500F or any other model. If you want to try, just remove assert lines in updater-script, BUT i'm not responsible if you brick your phone!
Is working on J500F model. Thank you @the-bomber for confirmation!
Read here to see how to remove assert lines: How to remove assert lines
Post #1 : Features, Download link, how to install the rom, credits.
Post #2 : Changelog, Bugs, to do list
Post #3 : FAQ/TIPS.
[QRCODE][/QRCODE]
INTRODUCTION:
Hello!
I'm Robert, an satisfied and happy user of the Samsung Galaxy J5 ( J500FN), but somehow bored of it since it doesn't have any custom rom or kernel, in few words, xda support. At begin, i was planning to build Cyanogenmod or AOSP and an custom kernel with minimal features, but i lack the knowledge to do it, but it's not impossible, just that i have alot of headache and i'm not that happy with that. I was also planning to do an custom rom too, with many features and many themes available, this is easier, but again alot of headache. I can't promise i would do these, but i may try again to make a better custom rom.
So, here is Stock ROM Advanced. It's just an simple rom, nothing more yet. Check out the features section for more informations.Screenshots attached ( switch XDA theme to 2013 or 2015 theme from bottom of page and click on Screenshots tab if you can't see them.
Please share this XDA thread since Galaxy J5 doesn't have it's own xda forum...
FEATURES:
- Based on firmware J500FNXXU1AOI1_J500FNDBT1AOI2_J500FNXXU1AOI1
- Pre-Rooted with SuperSU (v2.66)
- Busybox installed (v1.24.1-osm0sis)
- Zipaligned all system apps (for better utilization of RAM) - What mean this? <--- click
- Deodexed - What mean this? <--- click
- Debloated - removed some samsung apps and some other unecessary apps for more RAM, more internal memory available and less wakelocks (so more battery). More info about removed apps in post #2.
- Knox removed
- Faster boot & shutdown
- Faster than stock? You tell me
Click to expand...
Click to collapse
That's all the features it has now. Is just an custom rom based on stock rom, with some minimal changes, but improving the daily experience, at least for me. I can't promise, but maybe in future i will make it more than an simple rom, with more features. I repeat, can't promise it. I have decided to add more features in next version.
DOWNLOAD:
Stock_ROM_Advanced <<< click. Just mediafire link for now.
DO NOT MIRROR THE ROM. IF YOU WANT AN MIRROR, LET ME KNOW AND I WILL UPLOAD IT TO THE WEBSITE YOU WISH since i have good network! Thank you!
INSTALLATION:
(it's actually easy to install it, but i've wrote it this way because there may be new people to XDA which just wish the rom and doesn't want to bother by searching to how to do it)
1. Download the rom and put it on your External SD Card ( make sure you have enough space).
2. Download this TWRP recovery: TWRP recovery by @aapav01 - more info about this recovery at CREDITS
You can also use TWRP 3.0 by [MENTION]Nick Verse [/MENTION]which is fully working. Big thanks to him as well. If you didn't know yet, he also made a KERNEL for our J5
3. Download ODIN program. I'm using v3.09
4. Enable the OEM unlock bootloader option at developer options (if you can't see Developer Options, then go to Settings > About phone and tap 7 times build number).
5. Reboot your phone in download mode by keeping pressing Power button + home button + volume DOWN button at same time for few seconds. After an blue screen will appear, press volume up button.
6. Connect your phone with usb cable to your PC.
7. Open ODIN program and an number should appear at ID:COM. If it doesn't, then make sure that the phone usb drivers are installed.
8. Click on AP or PDA ( according to the version of odin which you downloaded) and choose the TWRP recovery you've downloaded and click START. Wait until the process finish.
9. Now go to TWRP recovery by keeping pressing Power button + home button + volume UP button at same time for few seconds.
10. Choose Wipe, then Advanced wipe and choose Dalvik Cache, System, Data and Cache and then Swipe to wipe.
11. Now choose Install and go to the place where you did put the ROM and choose it. Wait till installation finish and DON'T REBOOT YET.
12. Flash GAPPS. I use Open Gapps, ARM 5.1.1 pico version. http://opengapps.org/ . It's XDA thread is HERE .
13. Wipe dalvk cache & cache.
14. Reboot & WAIT 5-10 minutes until it boot!. Only first boot is longer. NOTE: When you reboot, if it ask you for SuperSU choose "do not install".
15. If you followed all the steps carefully, then everything will be OK. Enjoy
Click to expand...
Click to collapse
Flashing GAPPS is required because if you don't you will be stuck at setup wizard. This issue is probably caused by one of the removed apps. However, it won't cause any other problem. So, flashing GAPPS is a must right after you flash the rom, but you can remove them if you wish after you finish Setup Wizard.
CREDITS:
@SuperR. for his nice and useful kitchen.
@aapav01 for the TWRP recovery. Big thanks to him because without the recovery, you couldn't even flash the rom!
@osm0sis for busybox
@Chainfire for SuperSU
@Force me, for doing this small rom
Pressing the THANKS button does give me some satisfaction/motivation
XDA:DevDB Information
Stock ROM Advanced, ROM for all devices (see above for details)
Contributors
Force
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Lollipop 5.1.1 & TWRP ( knox get voided)
Based On: Official Stock ROM
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2016-02-01
Created 2016-02-01
Last Updated 2016-07-25
Changelog
CHANGELOG:
Code:
v1.0 - Initial version
BUGS:
- WiFi. Two guys confirmed me that WiFi isn't working, but is working fine for me.
WIFI got working! Read HERE and HERE.
Flash LINARO KERNEL and WIFI will work. Thank you @Nick Verse for the kernel and @swistakkk1 for confirmation.
Maybe is not fully debloated, but i didn't have any issue after i've deleted these apps. i can remove even more to make the rom lighter, apps which doesn't suit for me, which some people would want them... I may add AROMA zip to let people choose what apps they want to remove.
/system/app deleted apps
/system/priv-app deleted apps
FAQ / TIPS
1. How do i install Xposed Framework?
Follow these steps: http://forum.xda-developers.com/showpost.php?p=64490530&postcount=2
This is a list of confirmed working modules until now:
Code:
- [URL="http://forum.xda-developers.com/xposed/modules/xprivacy-ultimate-android-privacy-app-t2320783"]XPrivacy[/URL]
- [URL="http://forum.xda-developers.com/xposed/modules/xposed-appopsxposed-appops-4-3-t2564865"]AppOpsXposed[/URL]
- [URL="http://forum.xda-developers.com/xposed/modules/app-bootmanager-t2432359"]Boot Manager[/URL]
- [URL="http://forum.xda-developers.com/xposed/modules/mod-obb-sd-v0-1-t2884004"]Obb on SD[/URL]
- APM+
- Gpm notification seek bar[L-M]
- ScreenOffAnimation
- Android Phone Vibrator
- Flat Style Bar Indicators
- Greenify
- NoSafeVolumeWarning
- Notification Manager
Thank you:
@22rp420 @nov01 for confirming some xposed modules!
If you know more xposed modules which are working on our phone, share with us!
2. My phone is running slow / has lag. Why?
My phone haven't lag or ran slow never and i'm using Power Saving mode all the time.
Use Greenify app to hibernate the apps which are running in background. Maybe you don't want Facebook or other apps running in background, eating RAM and battery while you use your phone or while your phone is in idle/standby. Then Greenify become useful. It does help gaining some more available RAM and also battery.
Also, don't use any Task killer because it is not necessary. It just does the opposite: make the phone run slow.
3. My battery drain too fast!
People use phone different. Everyone. My best SOT (screen on time) was 13 hours. Maybe you can or can't achieve that SOT. It all depends of how you use the phone.
The biggest battery drainer on Android are:
- Facebook app, facebook messenger
- Google Services
Greenify does help gaining battery too.
You should install BetterBatteryStats app to see what is draining your battery.
Personally, i'm using facebook in browser and i enable play services when i need them. I disable them with Tasker app by running some shell commands. Of course, you can do this with init.d too or some other apps. I will share the shell commands which i'm using later. I have maximum 10 minutes wakelocks in BetterBatteryStats widget and my battery doesn't drain even 1% per night.
FAQ/TIPS
reserved
It is absolutely fantastic to see fellow forum/country who have worked and learned a lot and return help to the community.
Big like to you @Force !
Razvan
Sorry @Force i may not be able test your work as i don't have access to my pc right now and don't know for how long but once i get time and access back i will firstly try your rom. But yes anyways thanks for the development.
@Force this ROM work on SM-J500H?
smk.mosharraf said:
@Force this ROM work on SM-J500H?
Click to expand...
Click to collapse
WARNING: KNOX GET VOIDED!
This rom is for J500FN model.I don't know if it does work on J500F or any other model. If you want to try, just remove assert lines in updater-script, BUT i'm not responsible if you brick your phone!
Click to expand...
Click to collapse
It was specified at the begin of the thread...
Wifi
@Force WiFi is not working i have reinstalled this rom a few times now and it still wont let me switch the wifi on i have even tried going back to stock and the wifi is still working fine there any suggestions
galaxysi9000freak said:
@Force WiFi is not working i have reinstalled this rom a few times now and it still wont let me switch the wifi on i have even tried going back to stock and the wifi is still working fine there any suggestions
Click to expand...
Click to collapse
Did you flash it on J500FN?
I haven't experienced this problem. I will look into this.
Are there more people who experienced this? Please let me know.
Force said:
Did you flash it on J500FN?
I haven't experienced this problem. I will look into this.
Are there more people who experienced this? Please let me know.
Click to expand...
Click to collapse
yes i did flash this on the j500FN
Wifi
Force said:
Did you flash it on J500FN?
I haven't experienced this problem. I will look into this.
Are there more people who experienced this? Please let me know.
Click to expand...
Click to collapse
Thank you for this rom, but Wifi doesn't work :crying:
galaxysi9000freak said:
@Force WiFi is not working i have reinstalled this rom a few times now and it still wont let me switch the wifi on i have even tried going back to stock and the wifi is still working fine there any suggestions
Click to expand...
Click to collapse
MAICK-LGG3 said:
Thank you for this rom, but Wifi doesn't work :crying:
Click to expand...
Click to collapse
I don't have any issue with the WiFi, but I think that the problem might be caused by WlanTest which I've removed it.
Later, I'll post here an flashable zip which does bring the WlanTest back and hopefully Wifi gets fixed.
Thank you both for reporting this!
Razvan said:
It is absolutely fantastic to see fellow forum/country who have worked and learned a lot and return help to the community.
Big like to you @Force !
Razvan
Click to expand...
Click to collapse
YES! Indeed!
@MAICK-LGG3 @galaxysi9000freak
I'm sorry for being late and also that i haven't made an flashable zip. I uploaded an zip file containing the WlanTest.apk.
1) Download WlanTest zip and extract the zip on your sdcard.
2) After you extracted the zip, you will have an folder named WlanTest and inside the folder WlanTest.apk. Use an file explorer with root and move the folder WlanTest to /system/app.
3) Set permission for the folder like this: http://i.imgur.com/gin3axj.png .
4) Set permission for WlanTest.apk from inside of folder like this: http://i.imgur.com/NXy772e.png .
5) Reboot
Let me know if this fix your wifi problems.
I was quite busy on working on the rom. Starting from next version, the rom will have a new name. It will also be themed, will have it's own logo and own bootanimation and more. Don't wanna spoil
I see that this thread has 600+ views already which is nice to see it
Doesn't work
Force said:
@MAICK-LGG3 @galaxysi9000freak
I'm sorry for being late and also that i haven't made an flashable zip. I uploaded an zip file containing the WlanTest.apk.
1) Download WlanTest zip and extract the zip on your sdcard.
2) After you extracted the zip, you will have an folder named WlanTest and inside the folder WlanTest.apk. Use an file explorer with root and move the folder WlanTest to /system/app.
3) Set permission for the folder like this: http://i.imgur.com/gin3axj.png .
4) Set permission for WlanTest.apk from inside of folder like this: http://i.imgur.com/NXy772e.png .
5) Reboot
Let me know if this fix your wifi problems.
I was quite busy on working on the rom. Starting from next version, the rom will have a new name. It will also be themed, will have it's own logo and own bootanimation and more. Don't wanna spoil
I see that this thread has 600+ views already which is nice to see it
Click to expand...
Click to collapse
Wlantest tested, doesn't work
MAICK-LGG3 said:
Wlantest tested, doesn't work
Click to expand...
Click to collapse
Can you take a logcat please?
How to take logcat
Start taking the logcat and then try to put wifi on. Also, try to wipe dalvik cache and cache in recovery.
Thank you!
MAICK-LGG3 said:
Wlantest tested, doesn't work
Click to expand...
Click to collapse
if @Force doesnt have wifi problem, you should download again the rom and flash it
could be a download problem and some files can be corupted.
i meet many times this "download isue" and was fixed in this mode
just try it! @Force you can test the uploaded package too.
Trimis de pe al meu SM-J500FN folosind Tapatalk
Force said:
Can you take a logcat please?
How to take logcat
Start taking the logcat and then try to put wifi on. Also, try to wipe dalvik cache and cache in recovery.
Thank you!
Click to expand...
Click to collapse
i have tested this and wifi is still not working i have a log
View attachment 3631908
thanks for the rom
confirmed working fine on J500F !
if u need any help i'll be happy to help you since i have themed and developed roms ...
i was lazy to work on a rom but since you started i'll help if u need any
thanks for the awesome rom !!
edit: WIFI isn't working !
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.1 (MM), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Audio
RIL (Calls, SMS, Mobile data) [Dual-SIM]
Wifi (connection, tethering, etc)
Bluetooth (need patches in download links)
Camera, video codecs
Storage (both internal and external)
Storages (internal, external, adoptable storage) (*)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Torch (flashlight)
BUGS/Not working :
Using single SIM get no signals. To fix this, remove "persist.radio.multisim.config=dsds" from build.prop. If you need dual SIM, add it again
FM radio app doesn't work (can be opened only)
Slow 3G speed
First time installing CyanogenMod 13 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
Upgrading from an older build of this ROM
Wipe system partition, wipe dalvik-cache but not data partition
Optionally install Google Apps (GAPPS) (link above)
(*) NOTE: If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
Multitasking test video
DOWNLOADS:
Click to expand...
Click to collapse
ALPHA-1: Link
BETA-1: Link
BETA-2: Link
BETA-3: Link
BETA-4: Link
Want some screenshots? Get them in Screenshot tab above
XDA:DevDB Information
CyanogenMod 13, ROM for the Samsung Galaxy Core Prime
Contributors
doesntexits, Dreamstar, HASH, ngoquang2708
Source Code: https://github.com/koquantam/android_device_samsung_core33g/tree/cm-13.0
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 4
Beta Release Date: 2016-08-28
Created 2016-06-28
Last Updated 2017-11-17
CHANGELOG
ALPHA-1
Initial release
BETA-1
Fixed bluetooth and audio (included in patches)
Fixed screen flickering (thanks to @ngoquang2708)
Switched to jemalloc() memory allocator, optimized for multi-core processor
BETA-2
Added multi-user UI (find in Settings)
Fully fixed HW codecs, recorded videos no longer lags, also front cam recording has correct color
Added RIL props in build.prop
BETA-3
Fully fixed audio (thanks to @ngoquang2708)
Temporary disabled TRIM function in fstab (to prevent future problems)
Fixed STK hangs
BETA-4: Post #647
F.A.Q
Q: ROM startup too slow?
A: Nope, just because you haven't done a factory reset before installing the ROM
Q: Dead touchscreen?
A: Wrong installation method leads to this problem. Before restoring to stock through Odin, go to recovery mode (TWRP highly recommended), wipe everything in the Wipe section >> Advanced wipe (tick all system, data, cache, but not other storages, no need wiping dalvik/ART cache, as it already done by wiping data), then go to Download mode, restore stock, install custom recovery again and then, install the ROM you want
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G360HU
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can I use your ROM as a base for portings?
A: Yes, you could, but give proper credits
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings
A: This feature has been moved to Developer settings, and will reset to default (Charging) after every reboots. Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
Q: My phone is slow as snail after installing ROM. I've tried restoring stock and do formattings but no help?
A: I have answered this question. See this post: Link
Good job, bro. Thanks.
I'll surely test this one, when I'll be free.
I'll wait until the bugs fixed.Then I installed it.?
Deym fast.
wow thanx man
waiting for stable version
Audio patches added to OP
doesntexits said:
Audio patches added to OP
Click to expand...
Click to collapse
Bro, you're so fast at fixing bugs. :good:
@doesntexits
Bad working video record in standard gallery.
JustFrame said:
Bro, you're so fast at fixing bugs. :good:
Click to expand...
Click to collapse
Well, look at the OP, not me fixing audio bug
demchenko said:
@doesntexits
Bad working video record in standard gallery.
Click to expand...
Click to collapse
Stock has that too
doesntexits said:
Well, look at the OP, not me fixing audio bug
Click to expand...
Click to collapse
But bro, Please fix ASAP the screen flickering because it annoyed me.
Bro i cant install the patches. It says "Could not find 'META-INF/com/google/android blah-blah-blah
how we can change from cm12.1 to cm13 without losing any data?
or flash kitkat touchwiz first then go to cm13?
JustFrame said:
But bro, Please fix ASAP the screen flickering because it annoyed me.
Bro i cant install the patches. It says "Could not find 'META-INF/com/google/android blah-blah-blah
Click to expand...
Click to collapse
Link edited
wtf! Can not imagine. So fast. Looks like @doesntexits is entering too fast in CM13, never exits. LOL!
Wishi123 said:
Playstore not working haha.
Click to expand...
Click to collapse
Same here sometimes
Sent from my SM-G360H using XDA Labs
wow amazing you are sooo fast....i install this when it is stable and bugs free.......you are amazing bro #doesntexits
Hi, works on G360M? Thanks
Camera not work.
Sent from my SM-G360H with cm13 using*XDA-Developers mobile app
poriya.219 said:
Camera not work.View attachment 3797504
Sent from my SM-G360H with cm13 using*XDA-Developers mobile app
Click to expand...
Click to collapse
Unlock your screen first, then reopen camera app
Lineage is a free, community built, aftermarket firmware distribution of Android 7.1.1 (N), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Lineage is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Everything except in BUGS/Not working list
BUGS/Not working :
Offline charging doesn't work
STK hangs after choosing a subscription in the menu
Front camera displays 0,3MP instead of 2MP
First time installing LineageOS 14.1 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
NOTE: First boot might take long time, due to deodexed build, so don't consider bootloop!!
Upgrading from an older build of this ROM
Wipe system partition, wipe dalvik-cache but not data partition
Optionally install Google Apps (GAPPS) (link above)
(*) NOTE: If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
DOWNLOADS:
Click to expand...
Click to collapse
BETA-4: Drive link
Want some screenshots? Get them in Screenshot tab above
XDA:DevDB Information
LineageOS 14.1, ROM for the Samsung Galaxy Core Prime
Contributors
remilia15
Source Code: https://github.com/remilia15/android_device_samsung_core33g/tree/cm-14.1
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.4
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 3
Beta Release Date: 2017-04-08
Created 2017-04-08
Last Updated 2018-06-15
CHANGELOG
BETA-1:
Initial LineageOS 14.1 release
BETA-2: Post #25
BETA-3: Post #230
BETA-4: Post #365
Frequently Asked Questions
Taken originally from @doesntexits
Q: ROM startup too slow?
A: Nope, just because you haven't done a factory reset before installing the ROM
Q: Dead touchscreen?
A: Wrong installation method leads to this problem. Before restoring to stock through Odin, go to recovery mode (TWRP highly recommended), wipe everything in the Wipe section >> Advanced wipe (tick all system, data, cache, but not other storages, no need wiping dalvik/ART cache, as it already done by wiping data), then go to Download mode, restore stock, install custom recovery again and then, install the ROM you want
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G360HU
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can I use your ROM as a base for portings?
A: Yes, you can
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow, and now it's Nougat
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option in this ROM? I don't see it in Storage settings
A: This feature has been moved to Developer settings since Marshmallow, and will reset to default (Charging) after everytime you unplug your USB (due to security reasons). Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging" or "USB is connected"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
Q: My phone is slow as snail after installing ROM. I've tried restoring stock and do formattings but no help?
A: I have answered this question. See this post: Link
Thanks @remilia15
Thread bookmarked
Thanks
Awesome @remilia15 thanks
WOW we have got a LOS 14.1
you are awesome
Finally N for our device. Yay. Thanks OP
Fix for home button not working
So I managed to fix the home button not working bug.
Extract the contents of the attached zip file into your /system/usr/keylayout and change the permissions of each file to 644 if they are not 644 already. Then a reboot should fix the problem.
Now searching for quick fix of camera.
For older releases, use patch below by [email protected] for those bug fixes.
Or flash newer release like Beta-2.
Any custom kernel works?
FIX for bugs
listed things are fixed
camera [photo&video]
Flac audio codec
home button
volume [increased]
flash the zip and do a factory reset
DOWNLOAD
[email protected] said:
listed things are fixed
camera [photo&video]
Flac audio codec
home button
volume [increased]
flash the zip and do a factory reset
DOWNLOAD
Click to expand...
Click to collapse
Why still do factory reset? I just flashed and reboot works fine.
mmmmmmm Thanks for it
What about battery drain ????
Nice! Downloading, will test tonight.
Sent from Vietnam
Thank you
Q: How to use adoptable storage feature? I see it's new in Marshmallow
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings @remilia15
Lol !
we are here in Nougat Not Marshmallow
Thanks to all Contributor to build this Lineage Os For G360H, At least we got it :good:@[email protected] fixed the many bugs of Beta-1 so Please update Beta Version and Bug list @remilia15
Whats about Battery drain issue? Who already Install this Rom please review it,
Thanks you
adamh.ayyad said:
Q: How to use adoptable storage feature? I see it's new in Marshmallow
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings @remilia15
Lol !
we are here in Nougat Not Marshmallow
Click to expand...
Click to collapse
Mtp is currently having problems.
Sent from my SM-G360H using Tapatalk
---------- Post added at 07:00 AM ---------- Previous post was at 07:00 AM ----------
noman6999 said:
Thanks to all Contributor to build this Lineage Os For G360H, At least we got it [emoji14] :good:@[email protected] fixed the many bugs of Beta-1 so Please update Beta Version and Bug list @remilia15
Whats about Battery drain issue? Who already Install this Rom please review it,
Thanks you
Click to expand...
Click to collapse
Battery drain is common so just ignore it lol.
Sent from my SM-G360H using Tapatalk
SupulEdirisinghe said:
Mtp is currently having problems.
Sent from my SM-G360H using Tapatalk
Its working with me
Click to expand...
Click to collapse
@remilia15
Nice job my little sister
Anyway, I hope @AtomR saw this thread
It has been a very long time since my last post on XDA. I've been so busy with my job, and haven't got time to visit here
How are you guys all going?
UltimateROM 7.1.2 for the Samsung Galaxy Ace 2 ( GT-I8160 )
-------------------------------------------------------------------------------------------------------------------------------------
UltimateROM is an AOSP-based ROM with the some features from other ROMs added.
Code:
#include "std_disclaimer.h"
/*
* Your (probably expired) warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
RIL (phone/SMS/3G)
Video (playback & recording)
Audio (playback & recording)
Wi-fi
Bluetooth
Camera (Front and rear)
2D/3D HW Acceleration
USB, MTP, ADB
all native tethers (Wifi/BT/USB)
external storage
What doesn't work yet
you tell me
Download
UltimateROM
Rooting
Since UltimateROM doesn't itself include root, you should install it manually.
Installation
Before installation, make sure that your internal sdcard memory layout has enough space on /system partition. If you don't have enough space, you might want to repart your internal sdcard.
For installation, I recommend that you already have chrono kernel r5.2 (or up) and TWRP 3.1.1 installed. Other recoveries might work, but aren't tested.
install ROM
install root
install chrono kernel (kernel is located in the same folder as ROM)
Sources:
Device tree: https://github.com/ChronoMonochrome/android_device_samsung_codina
Kernel: Chrono Kernel
Vendor: https://github.com/ChronoMonochrome/android_vendor_samsung_u8500-common
Credits:
@MWisBest
@SergeyL
@3liteking148
@NovaFusion
@TeamCanjica
@Meticulus
@Unjustified Dev
@golden-guy
@nieltg
Omni ROM team
XDA:DevDB Information
[ROM][7.1.x] UltimateROM, ROM for the Samsung Galaxy Ace II
Contributors
ChronoMonochrome
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.1.2 ROM or up + TWRP 3.x
Version Information
Status: Beta
Created 2017-06-08
Last Updated 2017-12-02
Changelog
Changelog
2.12.2017 - build #3
We are now UltimateROM!
fixed home button long press to open the Recents
fixed native moving apps to SDcard
APP2SD and similar apps now should work correctly *
fixed second incoming call not to crash rild (not tested, needs confirmation), thanks to @SergeyL
small RIL fixes
* vold now doesn't get confused when it sees two or more partitions (needed by APP2SD) on an external sdcard.
18.06.2017 - build #2
USB mode selection fix (USB tether fix)
fixed adb to be enabled at the early boot stage (especially useful for bootloops debugging)
added surfaceflinger fixes for 7.x
fixed reboot sequence (there was a bug with sched FIFO policy in sensorservice)
fixed installd crash
added browser
08.06.2017 - build #1
first release
added UMS USB mode support
extended FFMPEG codecs support (from LineageOS 14.1)
various minor fixes (thanks to SergeyL)
Reserved
God bless you all
EDIT C
1twrp 3.1.1
2ROM
3SU
4kernel
5w8
6 finaly after 2hours of try and error have managed boot amazing 7.1 in ACE 2 you are amazing
- previous errors Intsdcard > fat ... vFat not present in TWRP ...
opengapps work?
there was no link to open gaps so if they are not in will have to install them later but for now :/ I have bootloope
Gapps are not tested by me - you can however, check MicroG or Gapps from CM14.1 topic.
kjub said:
man I had LG flex 2 .. .broke after 2years my mom recieved new phone and I got back old ACE2 maaaan you are amazing here guys thx a lot for you all <3
EDIT bootloop :/
0 twrp 3.1.1
1 repartitioned https://forum.xda-developers.com/showpost.php?p=57177356&postcount=44 this
After ZIP finished (could take some time) reboot CWM again and format partitions SYSTEM (EXT4), CACHE (EXT4), DATA (EXT4), SDCARD0 (VFAT) !!!! NO VFAT in twrp 3.1.1
- first forgot to came back / restart and format to EXT4 ... no VFAT so hope all works with EXT4
2 omnirom + superuser
3 dalvick wipe
Click to expand...
Click to collapse
Please read installation method carefully - you have to install chrono kernel (r5.2 or higher after you have installed the ROM).
ChronoMonochrome said:
Gapps are not tested by me - you can however, check MicroG or Gapps from CM14.1 topic.
Please read installation method carefully - you have to install chrono kernel (r5.2 or higher after you have installed the ROM).
Click to expand...
Click to collapse
- yes the kernel was there but ofter ROM I forgot to install it again
NOW it boots up, even camera did work
BUT twrp installed pico gaps or nano gaps ERROR 70 :/
but in phone over 1,6GB free
kjub said:
- yes the kernel was there but ofter ROM I forgot to install it again
NOW it boots up, even camera did work
BUT twrp installed pico gaps or nano gaps ERROR 70 :/
but in phone over 1,6GB free
Click to expand...
Click to collapse
Have you tried cleaned Gapps from CyanogenMod 14.1 topic?
ChronoMonochrome said:
Have you tried cleaned Gapps from CyanogenMod 14.1 topic?
Click to expand...
Click to collapse
kjub said:
- yes the kernel was there but ofter ROM I forgot to install it again
NOW it boots up, even camera did work
BUT twrp installed pico gaps or nano gaps ERROR 70 :/
but in phone over 1,6GB free
Click to expand...
Click to collapse
You've flashed CWM_ReParted_SY620_CA10_DA3100_SD100.zip
620 MB aren't enough, GAPPS aren't Installed on /Data but on /System. Try with 700 MB or higher.
Culateralligator said:
You've flashed CWM_ReParted_SY620_CA10_DA3100_SD100.zip
620 MB aren't enough, GAPPS aren't Installed on /Data but on /System. Try with 700 MB or higher.
Click to expand...
Click to collapse
In OP >> If you don't have enough space, you might want to repart your internal sdcard >> there is no 700MB system repartition file :/ only 620 and than f2fs (the twrp 3.3.1 is not f2fs ready, at least did not found the enable setting and in format is not that option, and also OP dont mention if it runs on f2fs )
pls link the 700MB repartition and the 14.1 cleaned gapps, into OP
kjub said:
In OP >> If you don't have enough space, you might want to repart your internal sdcard >> there is no 700MB system repartition file :/ only 620 and than f2fs (the twrp 3.3.1 is not f2fs ready, at least did not found the enable setting and in format is not that option, and also OP dont mention if it runs on f2fs )
pls link the 700MB repartition and the 14.1 cleaned gapps, into OP
Click to expand...
Click to collapse
Repartition zip:
http://forum.xda-developers.com/showpost.php?p=65965771&postcount=33
Culateralligator said:
Repartition zip:
http://forum.xda-developers.com/showpost.php?p=65965771&postcount=33[/QUOTE working
Click to expand...
Click to collapse
kjub said:
please provide me an recovery metod .... installed repartition ... and Data is gone ... from link you provided !!!! but I want back the old Chronos 620 repartition !!!!! and is not working DATA 0MB !!!!!!!!!!!!! why cant I repartition repartiutioned ?
Click to expand...
Click to collapse
How have you flashed that zip? How do you know you've 0 data? Have you flashed other things?
I want to test your ROM but may I ask you a question:
Does it take a lot of RAM usage?
bien2004 said:
I want to test your ROM but may I ask you a question:
Does it take a lot of RAM usage?
Click to expand...
Click to collapse
without apps, gapps, root 350-400mb
@up
this says nothing about real ram usage from the OS itself.
The Values u've posted also contains cached system apps and the launcher that can be killed without problems if an foreground app needs more RAM.
So in reality the real needed ram from the OS is much lower.
Androids memory management works in a different way than Linux itself.
The Design of Android uses "memory overcommitment"
That means apps allocates almost an huge amount of (virtual)ram even it's not really needed and most likely they don't use much of that allocated ram.
So let's take into account a few apps have already allocated the whole ram and u want to start an new app ...
Now u guys thinks: "Androids low-memory-killer will kill some non-important apps or an oldest cached app or so"
But nope, here come "memory overcommitment" in action and will allocate the new app simply over the already allocated ram from the other apps, that's of course was allocated but not currently used!
Only if there is no way to overcommit memory, then Androids LMK will start to kill apps in order to free up some ram.
As u can see, RAM in Android is used very efficiently and it doesn't need some annoying apps like task killer.
Also it's a really bad idea to force the launcher to stay in ram, because u'll just have lesser ram for your running app!
ace2nutzer said:
Also it's a really bad idea to force the launcher to stay in ram, because u'll just have lesser ram for your running app!
Click to expand...
Click to collapse
Yes you will have lesser ram, but if it has been terninated then it will take sone time to reload launcher... This WILL take more CPU usage and battery
If you want to hold your launcher into memory, then find a launcher that has low ram usage (such as 2.3.6 twlauncher )
And what about battery life here?
Yes that's true, but for me it only takes around 1 - 2 seconds to redraw the home screen using latest nova launcher
Well, the thing is that phone has low ram .. so it's really painfully idea to keep launcher in ram.
If u want it anyway, then u've to use zRam ... and this costs unfortunately even more battery.
Finally installed gapps with rom without no problem.
Opengapps works fine.
Let's see how it works later...
http://opengapps.org
---------- Post added at 11:58 PM ---------- Previous post was at 11:44 PM ----------
Ok but now is my break time... until this rom is so stable for daily use I will update. Otherwise I will stay in 6.0.1 because it is now really really stable for daily use
But now there is one more bug.....