Model:XT1521 Retasia(Indian)
So let's get on with the story
I own a moto e 2 4g variant. I unlocked the bootloader of the device,installed a custom recovery and flashed a custom ROM. Everything went well;I was trying a new ROM almost everyday(5.1.1 and 6.0.1) until one day when I decided to go back to stock ROM.I downloaded the official 6.0 stock ROM,installed it and started the device.The phone booted,went straight to recovery and showed erasing.The problem starts here.It showing eraseing and rebooted after some time and I thought that it's going to boot up into stock 6.0.But I was wrong.The phone booted and again did the same thing and this went on in a loop.So I decided to try it once more.This time I did two more things prior to installing the ROM;
Fastboot erase all
Fastboot erase system - w
Till then in bootloader it showed official in software status.But after those two erase commands it started showing modified.
Even then the result was the same I.e.showing erasing and rebooting.So I thought that I will go back to custom ROM for the time being.all went well,phone booted up but there was no signal.The phone was not accepting any Sims. I went to bootloader and immediately found out the cause.It was showing not found under baseband.So I seperately flashed a modem but to no luck.As of now I have tried all stock rims available(5.0.2,5.1.1,6.0) but the device is not booting up.
Any help will be highly appreciated.
Thanks in advance.
This happened to me with CM13, the same thing happened with the baseband number, and I couldn't even enter in the recovery, so I had to manually flash the Stock ROM via adb. It happened to me again when I tried to root my phone even with the systemless root, the phone just doesn't boot up, I'd recommend you to flash the basebands found in the forums, if that doesn't fix it, you'll have to manually flash the stock rom via adb or you can use the easy tool, it's fairly simple if you follow the steps, I'll leave the links bellow.
Easy tool flasher
Basebands
Filz0r said:
This happened to me with CM13, the same thing happened with the baseband number, and I couldn't even enter in the recovery, so I had to manually flash the Stock ROM via adb. It happened to me again when I tried to root my phone even with the systemless root, the phone just doesn't boot up, I'd recommend you to flash the basebands found in the forums, if that doesn't fix it, you'll have to manually flash the stock rom via adb or you can use the easy tool, it's fairly simple if you follow the steps, I'll leave the links bellow.
Easy tool flasher
Basebands
Click to expand...
Click to collapse
Used the flashing tool.But in every mode of flashing,the bootloader flashing and boot.img flashing is showing some error.But rest all are flashing succesfully.Still in bootloader it is showing baseband not found.And when I boot the device,the bootloader screen comes up,followed by a black screen and the cycle repeats.Any help would be appreciated.
Edit:My moto e 2015 is a LTE RETASIA(Indian) model.In the baseband link you provided,XT1521 RETASIA version's baseband is not available.
Fastboot flash bootloader bootloader. Img
Rename motoboot img
Sent from my MotoG3 using XDA-Developers mobile app
first.act.line said:
Fastboot flash bootloader bootloader. Img
Rename motoboot img
Sent from my MotoG3 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks I will try that.
gauthamkithu said:
Model:XT1521 Retasia(Indian)
So let's get on with the story
I own a moto e 2 4g variant. I unlocked the bootloader of the device,installed a custom recovery and flashed a custom ROM. Everything went well;I was trying a new ROM almost everyday(5.1.1 and 6.0.1) until one day when I decided to go back to stock ROM.I downloaded the official 6.0 stock ROM,installed it and started the device.The phone booted,went straight to recovery and showed erasing.The problem starts here.It showing eraseing and rebooted after some time and I thought that it's going to boot up into stock 6.0.But I was wrong.The phone booted and again did the same thing and this went on in a loop.So I decided to try it once more.This time I did two more things prior to installing the ROM;
Fastboot erase all
Fastboot erase system - w
Till then in bootloader it showed official in software status.But after those two erase commands it started showing modified.
Even then the result was the same I.e.showing erasing and rebooting.So I thought that I will go back to custom ROM for the time being.all went well,phone booted up but there was no signal.The phone was not accepting any Sims. I went to bootloader and immediately found out the cause.It was showing not found under baseband.So I seperately flashed a modem but to no luck.As of now I have tried all stock rims available(5.0.2,5.1.1,6.0) but the device is not booting up.
Any help will be highly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
u have to flash a official rom with propper way and remember u cannot flash old bootloader on the new bootloader it will definatly brick ur phone so if ur bootloader working do not replace it with old one for more info u can go in official rom section of this site and bootloader section.....good luck
vishalgupta.vns said:
u have to flash a official rom with propper way and remember u cannot flash old bootloader on the new bootloader it will definatly brick ur phone so if ur bootloader working do not replace it with old one for more info u can go in official rom section of this site and bootloader section.....good luck
Click to expand...
Click to collapse
Thanks buddy but unfortunately I have tried that.:crying:
OK guys, thread cleaned.
No more flame from anyone please, no more garbage.
OP please provide as much details as possible. Everyone else, you can ignore the OP if you want, but do not come in here just to flame.
Thanks.
Related
I have used windroid htc one x+ toolkit to unlock bootloader.
It shows a dialogue saying bootloader is unlocked . But in the phone it still shows a locked screen and also showing as s-off
I have root and i am able to use titanium backup.
I have also tried to flash twrp recovery.. but not able to do so.
Can somebody please point me in the right direction..
tonysimonhere said:
I have used windroid htc one x+ toolkit to unlock bootloader.
It shows a dialogue saying bootloader is unlocked . But in the phone it still shows a locked screen and also showing as s-off
I have root and i am able to use titanium backup.
I have also tried to flash twrp recovery.. but not able to do so.
Can somebody please point me in the right direction..
Click to expand...
Click to collapse
Try manually follow the instructions from htcdev and let us know which part fails........
[email protected] said:
Try manually follow the instructions from htcdev and let us know which part fails........
Click to expand...
Click to collapse
Thank you ..
I was able to flash twrp using Rom toolbox.
now I have twrp but the bootloader still shows as locked.
I tried to install a custom Rom but failed because of my own mistake.. today I will try once more to flash a Rom.
will post it's result..
I think I read somewhere that soff devices can't be unlocked..is this true
tonysimonhere said:
Thank you ..
I was able to flash twrp using Rom toolbox.
now I have twrp but the bootloader still shows as locked.
I tried to install a custom Rom but failed because of my own mistake.. today I will try once more to flash a Rom.
will post it's result..
I think I read somewhere that soff devices can't be unlocked..is this true
Click to expand...
Click to collapse
I dont think so....
Can u try using HTC dev and report back....
NOTE UNLOCKING WILL WIPE ALL UR DATA AND SDCARD STUFF FROM UR PHONE....
SO BACKUP
[email protected] said:
I dont think so....
Can u try using HTC dev and report back....
NOTE UNLOCKING WILL WIPE ALL UR DATA AND SDCARD STUFF FROM UR PHONE....
SO BACKUP
Click to expand...
Click to collapse
Sure I will try it in the evening.
You can definitely Unlock it using the HTCDEV process , I have a done this. Any ways if you are able to flash a ROM then there is no reason to get it Unlocked, more over S-OFF gives you full control over the device but again it also increases the risk of getting your phone bricked so make sure you use it wisely (knowing what you flash) , so I will say why to beg HTC for some thing they have already provided.
One more thing S-OFF device means you dont need to flash boot.img separately so you dont need to use your PC to flash roms no more.
Waiting to know about your progress on flashing the ROM ..
ethanon said:
You can definitely Unlock it using the HTCDEV process , I have a done this. Any ways if you are able to flash a ROM then there is no reason to get it Unlocked, more over S-OFF gives you full control over the device but again it also increases the risk of getting your phone bricked so make sure you use it wisely (knowing what you flash) , so I will say why to beg HTC for some thing they have already provided.
One more thing S-OFF device means you dont need to flash boot.img separately so you dont need to use your PC to flash roms no more.
Waiting to know about your progress on flashing the ROM ..
Click to expand...
Click to collapse
I have now successfully flashed a Rom..initially I tried it without flashing the boot.img and it entered a boot loop.
Then I installed flashify and flashed boot.img that came with the Rom. Then the Rom is working now.
The boot loader is still locked. Has twrp .
tonysimonhere said:
I have now successfully flashed a Rom..initially I tried it without flashing the boot.img and it entered a boot loop.
Then I installed flashify and flashed boot.img that came with the Rom. Then the Rom is working now.
The boot loader is still locked. Has twrp .
Click to expand...
Click to collapse
so you mean to say you failed to install the boot.img from the custom recovery ? well that is weird, one more thing since you were in boot loop how did you manage to install flashiffy !
if you may please include the complete flashing steps , will be helpful for my experiments.
ethanon said:
so you mean to say you failed to install the boot.img from the custom recovery ? well that is weird, one more thing since you were in boot loop how did you manage to install flashiffy !
if you may please include the complete flashing steps , will be helpful for my experiments.
Click to expand...
Click to collapse
Initially I flashed the Rom alone and it went into bootloop and all buttons became unresponsive .so I waited till the battery ran out and the phone switched off. Then I recharged , entered recovery by vol down + power button.. I had the backup there . So I restored back up.. then phone rebooted normally.. and I flashed boot.img by flashify just because I didn't know any other method... Then from recovery I wiped dalvik cache and system .. flashed the new Rom.. reeboot and fine..
Feel free to ask for any more clarification..
Hi! I've managed to brick my device (d610ar) badly, i think
the device doesn't boot normally (message "Secure booting error! Cause: boot certification verify.", and i am stuck there), can't charge it with the wall charger, and the only thing that works is download mode; but flashing a kdz with LG FlashTool (the way i went back to stock a few times) says flashing and at 2% (or 3% sometimes) it says that doesn't find the device, that i have pull out the battery to reconnect my device again and when i do that it does the same thing on a loop, asking to do it again later..
the funny thing is that it appears on device manager on windows, on com port 11 for example, but the FlashTool doesn't recognize it..
so, i can't flash any kdz and doesn't boot.. i've read around here in xda to enter fastboot to fix it, but.. can this device enter fastboot? i couldn't do it, tried adb too and couldn't make the device visible..
i, before this happened, had multirom installed, rebooted to recovery and deleted secondary roms to install in primary rom cm12.1.. there started to happen strange things when rebooted normally to configure it..
after a while trying to boot found around here in xda too that i could enter twrp recovery via hardware keys to reinstall again, so got into it and installed a flashable zip to come back to stock KitKat directly, that have worked for me before..
after that rebooted and i can't do anything else than download mode..
i kinda figured that the problem must be that multirom injected the boot sector after installing the stock flashable zip, and when i did that restored the stock aboot and abootb (these, modified carefully, allowed us to unlock bootloader and flash recoveries, etc, etc.. ; by the way, many thanks to the devs that discovered it and made the guides!)..
now i have read the instructions for flash via fastboot the stock boot.img and so pass the security verification, but i can't enter it..
so, what do you think that could be the next step? or is it really hard bricked and i should forget about it? i'm really hoping to recover it but i don't know what else to do..
sorry for the bad english, not my primary language
thanks for reading and i am hoping to hear some suggestions!
He is not hard bricked you need to flash stock boot and reunlock bootloader if you have custom recovery still installed, but go first with the eazy way search xda about lg flash tool stuck at 2% there some guides to help you get kdz flashed
Thank you very much!
numpea said:
He is not hard bricked you need to flash stock boot and reunlock bootloader if you have custom recovery still installed, but go first with the eazy way search xda about lg flash tool stuck at 2% there some guides to help you get kdz flashed
Click to expand...
Click to collapse
Thank you very much! You made me realize why wasn't working..
Because of you, i started to search threads related with the "flashtool stuck at 2%" and one of the things to look at was a txt file to see what was the problem.. there i found out that the lg FlashTool recognized my device as LGD618..
That's when i realized that i must've messed up when i flashed a lollipop flashable zip for the D618(a while ago), "converting" my cellphone on that model.. so when i connected on download mode and put the LGD610 kdz the comparison of cellphone model and binary model didn't match..
Solution was to flash LGD618 kdz, boot up normally, install towelroot, install supersu, edit a line on build.prop
from persist.multisim.config=dsds to persist.multisim.config=none
rebooted and that's it.. everything works perfectly now! i won't be doing stuff to it for a while
probably will stay stock like that, because now i will be using an OnePlus One in a few days and the G2 mini will be used by my mother, i think..
Thanks again! You saved my device for being bricked forever
i glad i could helped you :good:
I tried installing kitkat having installed lollipop and did not work, also I tried installing lollipop and nothing. Well I think this update lollipop are adding some kind of lock to disallow downgrade or upgrade by KDZ. I try other methods, unlocking bootloader, and install a aboot.img, bricked my phone. I recommend that you do not attempt to unlock the bootloader and install any system image that is not official, or may end up with a dead device.
Hi guys,
Before you say again a topic on a non bricked One Plus X, I would like to let you know that I've checked and try almost all of the tutorial I've seen on xda and one plus forum.
I was on CM14.1 with this ROM : https://forum.xda-developers.com/oneplus-x/orig-development/rom-cyanogenmod-14-onyx-t3452150
Unfortunately, I made the 25-12-2016 update and it totally broke up the phone..
I download the OnePlus X OxygenOS 3.1.4 on the One Plus website. So I flash it on the stock recovery, it tells me "Install success" then I reboot and it stays on the bootlogo.
For information, I can't access the oem unlock menu if needed, but when I ask the oem device info it says unlocked. The phone is detected by the computer sometimes with unknown device and sometimes correctly with the qualcomm drivers..
I have a back up made from TWRP, I can access the device by the fastboot mode, it seems that all the operations written here worked but it doesn't install or even boot on TWRP..
Thanks for your help guys.
Are you using latest TWRP from website think version 3.0.3?
Exodusche said:
Are you using latest TWRP from website think version 3.0.3?
Click to expand...
Click to collapse
I'm not even using TWRP, since I can't boot on it.. But I tried to flash the twrp-3.0.2-2 from blue spark v41, after the installation via Flashboot, it doesn't boot up on the recovery..
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Exodusche said:
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Click to expand...
Click to collapse
Exactly, the phone is stuck on the one plus logo..
defqon_1 said:
Exactly, the phone is stuck on the one plus logo..
Click to expand...
Click to collapse
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Divyesh49 said:
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Click to expand...
Click to collapse
Didn't work. I tried to lock and then unlock to be sure but not is stay in false for tempered AND unlocked.
So I don't have any idea on how make android back on my phone.
I just have access to Fastboot mode. No recovery, nothing else..
EDIT : phone is not starting anymore. I try to charge it hoping it just a low battery problem..
You should send it to RMA
Trimis de pe al meu Redmi 3S folosind Tapatalk
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Help Pls
defqon_1 said:
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Click to expand...
Click to collapse
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Fix It!
Exodusche said:
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Click to expand...
Click to collapse
Done! finally i can reinstall stock rom and recovery with drivers by usb.
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Done
defqon_1 said:
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Click to expand...
Click to collapse
Don't worry i have restored my OPX 5 days ago. I used the method of this video: https://youtu.be/R4SVSovw4Jo and files from this thread: https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 , if it can help someone.
I was flashing paranoid android 6.0.2 for my device. I downloaded the zip(from the official paranoid android website) and checked the md5 checksum, which did not match. However, like a total idiot, I flashed it nonetheless. On booting, the phone gets stuck on the boot logo. I tried booting into recovery(TWRP) and performing a factory reset to no avail. I redownloaded the flashable zip for Paranoid, successfully verified the md5 checksum and flashed it again, no avail. Restore a full backup from within TWRP, no avail. My phone still gets stuck on the bootlogo. I have looked all over every forum without any results. Please help me out? I would like to get it back to functional state and flash the rom again. As mentioned, I have access to my custom recovery and can connect to my device via fastboot. I am willing to give any other information you may need.
Thanks!
Shreyas
shreyasminocha said:
I was flashing paranoid android 6.0.2 for my device. I downloaded the zip(from the official paranoid android website) and checked the md5 checksum, which did not match. However, like a total idiot, I flashed it nonetheless. On booting, the phone gets stuck on the boot logo. I tried booting into recovery(TWRP) and performing a factory reset to no avail. I redownloaded the flashable zip for Paranoid, successfully verified the md5 checksum and flashed it again, no avail. Restore a full backup from within TWRP, no avail. My phone still gets stuck on the bootlogo. I have looked all over every forum without any results. Please help me out? I would like to get it back to functional state and flash the rom again. As mentioned, I have access to my custom recovery and can connect to my device via fastboot. I am willing to give any other information you may need.
Thanks!
Shreyas
Click to expand...
Click to collapse
What was your last rom? Did u upgrade ur bootloader?
You probably looking at mega unbrick guide
cva_kabil said:
What was your last rom? Did u upgrade ur bootloader?
Click to expand...
Click to collapse
I was running stock OxygenOS(>3.0.0) ROM.
shreyasminocha said:
I was running stock OxygenOS(>3.0.0) ROM.
Click to expand...
Click to collapse
Yeah thats d problem, PA roms are only compatible with old lollipop bootloader, u said u were in oos3 which means u hv updated to ur bootloader to marshmallow. Try clean flashing new bootloader supported roms. Before downloading check for its compatibility, all nougat roms r compatible.. U can try if u wish ))
cva_kabil said:
Yeah thats d problem, PA roms are only compatible with old lollipop bootloader, u said u were in oos3 which means u hv updated to ur bootloader to marshmallow. Try clean flashing new bootloader supported roms. Before downloading check for its compatibility, all nougat roms r compatible.. U can try if u wish ))
Click to expand...
Click to collapse
That said, should I follow a bricked guide before doing the above?
cva_kabil said:
Yeah thats d problem, PA roms are only compatible with old lollipop bootloader, u said u were in oos3 which means u hv updated to ur bootloader to marshmallow. Try clean flashing new bootloader supported roms. Before downloading check for its compatibility, all nougat roms r compatible.. U can try if u wish ))
Click to expand...
Click to collapse
Also, is there any way I can downgrade my bootloader?
shreyasminocha said:
Also, is there any way I can downgrade my bootloader?
Click to expand...
Click to collapse
Flash any 2.X.X ROM. One way is to fastboot flash old stock recovery and flash safest way I think. The other is to flash with twrp make sure after flashing the ROM to flash old twrp IMG after. Make sure you boot right back into twrp.
shreyasminocha said:
Also, is there any way I can downgrade my bootloader?
Click to expand...
Click to collapse
Assuming you're on OOS3 with TWRP for new bootloader,
- Boot into recovery
- Wipe everything except SD Card
- Flash OOS2 zip
- Boot into it
- Goto settings, unlock dev options, enable advanced reboot
- Then reboot to bootloader
- Flash twrp for old bootloader via fastboot, use this one https://dl.twrp.me/onyx/twrp-3.0.2-0-onyx.img
Done
-Now u hv sucessfully downgraded ur bootloader,flash PA or any supported roms
Used mega unbrick tool because I was unable to unlock bootloader and now I'm stuck at 1+ logo (powered by android disappears quickly), did you solve it?
edit: nevermind, adb sideload with stock OOS fixed it.
TravaPL said:
Used mega unbrick tool because I was unable to unlock bootloader and now I'm stuck at 1+ logo (powered by android disappears quickly), did you solve it?
edit: nevermind, adb sideload with stock OOS fixed it.
Click to expand...
Click to collapse
Tried mega unbrick. (bootloop)
Tried OOS3.1.4.zip via stock recovery and success message apears after installation but still bootloop (previusly it was on CM13)
Tried ADB sideload (but not booting)
i have access to ADB and Fastboot.
please help :crying:
iamsandiprathva said:
Tried mega unbrick. (bootloop)
Tried OOS3.1.4.zip via stock recovery and success message apears after installation but still bootloop (previusly it was on CM13)
Tried ADB sideload (but not booting)
i have access to ADB and Fastboot.
please help :crying:
Click to expand...
Click to collapse
Did you managed to sort it out? How?
Mega unbricked guide?
Hi experts!
Is there an available factory image of the latest firmware for griffin xt1650-03 for download? I unlocked my boot loader and tried to flash custom firmware now I am stuck in boot loop. My phone was nougat and updated via OTA last week before I decided to unlock boot loader. I tried loading the latest image I got from firmware.center but I am getting Downgrade version and verification failed when flashing stock partition and not loader. Please help
Note: I did this my wifi became unusable after my last OTA (mac 02:00:00:00) and thought using custom firmware would help
And I did not make a back up
Get it in fastboot mode, flash TWRP and root it. That might work.
I am in exactly the same position as OP, although I have successfully installed TWRP and have open bootloader from which I can boot into TWRP no probs. I didnt do a backup (will never again make this error!!)
The problem arises when I try to flash (any) files over to device I get the "Downgrade version and verification failed" like OP when flashing stock Telus rom (telus phone) or any other rom/files.
Rebooting brings me back to the moto unlocked bootloader page (horrible!) and the only way out is to get key combo or fastboot into bootloader/recovery etc.
Tried flashing multiple images as whole or bit by bit, always get the same bad validation message. Finding it hard to believe this 700dollar phone is a brick after literally following MotoS own 'unlock your bootloader' instructions. Never had issues like this on OPO, S6, S7, LG etc.
PC shows android device connected, nothing in the two empty folders that appear. TWRP confirms I have no OS installed and throws me back to bootloader.Wondering if locking bootloader again will allow me to install 'stock' ROM or at least recovery? I have reached my android knowledge limit and am not sure where to go from here, any help much appreciated!
OK. This happened to me. The way that I solved it was by flashing the RETUS NPL86.25.15 and then flashing the OTA 25.17-3-3 through twrp. Although I think I could've saved the headache if the original instructions included flashing the OEM.bin but anyways. That's what I did. Hope it helps.
Thanks. I did try flashing the oem.bin but got partition name error.
Can you link to the files you mention I think it's a kernel and then an OTA image? Thanks again in advance.
What I mean is that when I first started flashing the RETUS rom the instructions skipped that part so I ended up flashing most of the file system without something so it would never boot but it wouldn't loop it'd just hang. So basically you flash everything and then include the OEM.bin after you do the system chunks