hello friends, can now explaned to install a custom recovery for this model?
and need more information for unlock bootloader lets create now Forum for PULP FAB 4G
thanks for your best helping
Hello, Wiko Pulp FAB 4G can be rooted with kingroot. I'm trying to search on various forums about cwm, philz or twrp but nothing...
The bootloader seems to be already unlocked because communication in fastboot mode works.
I think the beginig before custom ROM is a custom recovery but I don't have any information... sorry.
Hello friend i search but dont see nothing.... Your team xda need developer twrp custom for this modelo.....
I have unlock bootloader but i have this:
Then I used this command
"fastboot oem unlock"
It promted for the confirm (yes [Volume Up] or No [Volume Down]).I pressed volume up key.But Nothing happened. Then I pressed volume down button. it said "unlock failed..... return to fastboot in 3s"
after 3 seconds :
Select Boot Mode :
[VOLUME_UP to select. VOLUME DOWN is OK]
[Recovery Mode]
[Fastboot Mode] <<==
[Normal Mode]
=> FASTBOOT mode.....
I tried to select the mode.But No key was worked.
Good morning,
Have you tried (on normal usage) to enable oem unlock in : parameters - {} developers option - enable oem unlock = ON.
Maybe after this, reboot fastboot mode and retry...
Best regards.
root and twrp recovery
Hello,
I have some news about root and twrp recovery
1) ROOT
You can root Wiko pulp fab 4G with kingroot.apk using it directly in the phone.
If somebody want to replace kinguser by supersu then use "Replace_Kinguser_with_SuperSUv2.4" searching on google
2) TWRP
I made an adapted twrp witch works : http://dl.free.fr/jlC9Opl5O (only a little display problem : you can see a small cursor on the middle screen)
You can flash Twrp_3.0.0.2_PulpFab4G.img using fastboot or flashify (unzip file before).
That's all
TWRP
sebi3481 said:
Hello,
I have some news about root and twrp recovery
1) ROOT
You can root Wiko pulp fab 4G with kingroot.apk using it directly in the phone.
If somebody want to replace kinguser by supersu then use "Replace_Kinguser_with_SuperSUv2.4" searching on google
2) TWRP
I made an adapted twrp witch works : LINK (only a little display problem : you can see a small cursor on the middle screen)
You can flash Twrp_3.0.0.2_PulpFab4G.img using fastboot or flashify (unzip file before).
That's all
Click to expand...
Click to collapse
i did this on my wiko and the twrp you made crashed my entire system, i had to flash the stock recovery again and had to re-install the firmware :/
I works fine for me. How did you install it?
Incomtus said:
I works fine for me. How did you install it?
Click to expand...
Click to collapse
Just like you said i had to, did it with flashify and at first everything seemed okay but then my system got stuck in a bootloop and i couldn't fix it so
TheDarkDesolator said:
Just like you said i had to, did it with flashify and at first everything seemed okay but then my system got stuck in a bootloop and i couldn't fix it so
Click to expand...
Click to collapse
Did you made a dalvick cache wipe?
Incomtus said:
Did you made a dalvick cache wipe?
Click to expand...
Click to collapse
yup, like i would on any other devices i rooted
TheDarkDesolator said:
yup, like i would on any other devices i rooted
Click to expand...
Click to collapse
Mmm sorry i do not see. Maybe a stupid question but i prefer to ask it, you tried to install it on the pulp fab 4g and not pulp 4g or pulp fab 3g?
Also it is strange that your phone reacts like this because one time i installed a bad recovery on my pulp fab 4g (it was the ridge fab recovery lol) and the only problem was there was no recovery anymore.
And normally the recovery has no influence on the system partition but when you install or delete or format something.
Maybe you were unlucky.? But won't tell you to try again lol but if you have time to kill if it doesn't work again maybe you can try.
Recovering the recovery
Hi there, I also intalled the .img in a Pulp 3G and I have no access to the recovery and also the pone doesn't recognize the SIM card. I think I was really unlucky. Do you know a way I can solve this? I have tried to hard reset my pone but no reset is done at the end. I have tried to instal the firmware and nothing also. I think thing will get better if I am able to recover the recovery, how did you do it? any suggestions?
Thanks!
Jerico.ff said:
Hi there, I also intalled the .img in a Pulp 3G and I have no access to the recovery and also the pone doesn't recognize the SIM card. I think I was really unlucky. Do you know a way I can solve this? I have tried to hard reset my pone but no reset is done at the end. I have tried to instal the firmware and nothing also. I think thing will get better if I am able to recover the recovery, how did you do it? any suggestions?
Thanks!
Click to expand...
Click to collapse
Hello,
This recovery. Img is for the pulp fab 4g and only the pulp fab 4g.
It is normal that you can't reset your phonr because it need the stock recovery.
So if you have no recovery anymore you do not have so much solutions.
1st find the stock recovery somewhere maybe on forum or to someone having the same phone than you and install it like you did with this one.
Maybe the app you used to install this recovery made a back up of your stock recovery.
Last thing I know is to flash your phone completely....
In fact i don't know why your phone doesn't recognize the sim card anymore.... Strange....
Hope it helps you...
Thanks for your answer.
I've been trying to get the stock recovery. I used Rashr to do the flashing but unfortunatly it didn't make the backup (my bad). Any suggestion or tutorial on how to flash the phone? As I cannot access to the recovery I don't know how to do it.
I am also worry about the sim card detection, so I am convince I have to hard reset the pone but I can't. Any recommendation will help
Thank you!
Jerico.ff said:
Thanks for your answer.
I've been trying to get the stock recovery. I used Rashr to do the flashing but unfortunatly it didn't make the backup (my bad). Any suggestion or tutorial on how to flash the phone? As I cannot access to the recovery I don't know how to do it.
I am also worry about the sim card detection, so I am convince I have to hard reset the pone but I can't. Any recommendation will help
Thank you!
Click to expand...
Click to collapse
Ok don't worry,
To flash the phone you have to download (on a windows computer) the stock rom that is findable on wiko site or search on Google "your phone model (pulp 3g?) stock firmware" and you will quickly find the thing. About 700 Moctet.
Unzip and install the exe file. Follow the instructions. One time the app on your computer will ask you to press vol+ and - for three seconds and plug your phone to computer. In fact you have to plug while keeping pushing those vol + and -
CAUTION EVERYTHING WILL BE ERASED ON YOUR PHONE.
Normaly everything should be good
sebi3481 said:
Hello,
I have some news about root and twrp recovery
1) ROOT
You can root Wiko pulp fab 4G with kingroot.apk using it directly in the phone.
If somebody want to replace kinguser by supersu then use "Replace_Kinguser_with_SuperSUv2.4" searching on google
2) TWRP
I made an adapted twrp witch works : http://dl.free.fr/jlC9Opl5O (only a little display problem : you can see a small cursor on the middle screen)
You can flash Twrp_3.0.0.2_PulpFab4G.img using fastboot or flashify (unzip file before).
That's all
Click to expand...
Click to collapse
Thank you. I can confirm that this works perfectly for both the Wiko Pulp 4G and the Wiko Pulp Fab 4G.
Edit: made a guide for these phones http://forum.xda-developers.com/general/general/guide-wiko-pulp-4g-pulp-fab-4g-root-t3436580
sebi3481 said:
2) TWRP
I made an adapted twrp witch works : http://dl.free.fr/jlC9Opl5O (only a little display problem : you can see a small cursor on the middle screen)
You can flash Twrp_3.0.0.2_PulpFab4G.img using fastboot or flashify (unzip file before).
That's all
Click to expand...
Click to collapse
Hello, sebi3481!
First of all, thanks for the customized twrp.img.
As previously reported by @Adnihil, it works for Wiko Pulp 4G, too.
Would you be so kind to send your .img back to TWRP team for review? Maybe they could add our device(s) to supported list afterwards.
Thanks! :good:
Related
Hi!
1. I would like to flash ClockworkMod Recovery (or any other recovery method) on my Tianji i9220 device, because the phone hasn't got too many features, if i push volume+ +power button the Factory menu has only tests and reboot option, but i would like to flash another rom on the device, but i don't want to try until i haven't got a recovery option. If someone can help me, it would be nice! (I installed goomanager and i can enter to cwm recovery mode from it, but if i would like to flash the cmw to the phone, idk which version sould i choose)
The device is already rooted, with this tutorial: http://forum.xda-developers.com/showthread.php?t=1872072 (the webtrickz one)
2. If do you now any other method to backup and restore my ROM it would be good to me! I found a tool called Smart Phone Flash tool. I think it can do it, but i don't know how. Correct me if this program has other purposes.
(If anyone has some patience and would like to help me, you can add me on msn or skype by kanduur_patrik[.-at-.]hotmail.com thanks!)
patrik2991 said:
Hi!
1. I would like to flash ClockworkMod Recovery (or any other recovery method) on my Tianji i9220 device, because the phone hasn't got too many features, if i push volume+ +power button the Factory menu has only tests and reboot option, but i would like to flash another rom on the device, but i don't want to try until i haven't got a recovery option. If someone can help me, it would be nice! (I installed goomanager and i can enter to cwm recovery mode from it, but if i would like to flash the cmw to the phone, idk which version sould i choose)
The device is already rooted, with this tutorial: http://forum.xda-developers.com/showthread.php?t=1872072 (the webtrickz one)
2. If do you now any other method to backup and restore my ROM it would be good to me! I found a tool called Smart Phone Flash tool. I think it can do it, but i don't know how. Correct me if this program has other purposes.
(If anyone has some patience and would like to help me, you can add me on msn or skype by kanduur_patrik[.-at-.]hotmail.com thanks!)
Click to expand...
Click to collapse
Just before I begin, Patrik: would you understand written German for the some of the links that made me understand the Flash Tool are German?
And do you still need help on flashing CWM Recovery on your Tinji?
Flashing CWM recovery on a Tinji GT-i9220 MTK6577
patrik2991 said:
Hi!
1. I would like to flash ClockworkMod Recovery (or any other recovery method) on my Tianji i9220 device, because the phone hasn't got too many features, if i push volume+ +power button the Factory menu has only tests and reboot option, but i would like to flash another rom on the device, but i don't want to try until i haven't got a recovery option. If someone can help me, it would be nice! (I installed goomanager and i can enter to cwm recovery mode from it, but if i would like to flash the cmw to the phone, idk which version sould i choose)
The device is already rooted, with this tutorial: http://forum.xda-developers.com/showthread.php?t=1872072 (the webtrickz one)
2. If do you now any other method to backup and restore my ROM it would be good to me! I found a tool called Smart Phone Flash tool. I think it can do it, but i don't know how. Correct me if this program has other purposes.
(If anyone has some patience and would like to help me, you can add me on msn or skype by kanduur_patrik[.-at-.]hotmail.com thanks!)
Click to expand...
Click to collapse
Well, you know what, you might as well forget about the German
1.) download the flash tool here: http://sdrv.ms/SVnuBD to the folder c:\users\[your username]\SP_Flash_Tool_v3.1.222.00
2.) run c:\windows\System32\hdwwiz.exe.
3.) choose "Choose hardware manually from a list"
4.) choose "Show all devices"
5.) choose "Disk..." , point to the c:\users\[your username]\Downloads\SP_Flash_Tool_v3.1.222.00\MTK6577 VCOM USB Driver\usb2ser_Win7_864.inf
6.) choose "MediaTek PreLoader USB VCOM Port"
7.) accept to install a non-signed driver even if Windows warns you to do it
8.) remove your Tinji's battery
9.) run the flash tool
10.) click on "Scatter-loading" and open the "MT6577_Android_Scatter_emmc" scatter file
11.) untick "BOOTIMG" and "ANDROID", double-click on "RECOVERY"
12.) choose the "cwm_recovery.img" file
13.) click on "Download"
14.) ignore the "Download Warning"
15.) re-insert the battery, press "Vol Up" [or "Vol Down"]on your Tinji and connect it with the computer
16.) the flash tool should start flashing the modified recovery.img, you might keep pressing "Vol Up", it's not necessary, but anyway the flashing doesn't take long
17.) done!
You can now restart your Tinji anytime you want in recovery, either from Goo Manager or from ROM Manager (funnily enough, pressing "Vol Down" on starting the phone didn't work anymore lately).
Whenever you need your original ("Android system recovery <3e>") recovery, you'll find it under c:\users\[your username]\Downloads\SP_Flash_Tool_v3.1.222.00\recovery.img to re-flash it. [Edit 4/12/12: does for some reason not seem to work, AC]
If there's still problems on installing the driver under 6.) and/or you are running Windows other than 7 or 8 and/or other than x64 [64 bit], let me know.
In case of any other problems, feel free to ask!
Thank you!
I will try it, do you know which roms working well with this phone?
Tinji GT-i9220 custom ROMs
patrik2991 said:
Thank you!
I will try it, do you know which roms working well with this phone?
Click to expand...
Click to collapse
Hey Patrik,
as far as I know there's only one.
Try here: http://forum.xda-developers.com/showthread.php?t=1885919 and then you'll find the link in post #5.
Alex
TWRP recovery for our Tinji!
patrik2991 said:
Hi!
1. I would like to flash ClockworkMod Recovery (or any other recovery method) on my Tianji i9220 device, because the phone hasn't got too many features, if i push volume+ +power button the Factory menu has only tests and reboot option, but i would like to flash another rom on the device, but i don't want to try until i haven't got a recovery option. If someone can help me, it would be nice! (I installed goomanager and i can enter to cwm recovery mode from it, but if i would like to flash the cmw to the phone, idk which version sould i choose)
The device is already rooted, with this tutorial: http://forum.xda-developers.com/showthread.php?t=1872072 (the webtrickz one)
2. If do you now any other method to backup and restore my ROM it would be good to me! I found a tool called Smart Phone Flash tool. I think it can do it, but i don't know how. Correct me if this program has other purposes.
(If anyone has some patience and would like to help me, you can add me on msn or skype by kanduur_patrik[.-at-.]hotmail.com thanks!)
Click to expand...
Click to collapse
Now there's even Team Win Recovery Project out for our Tinji!
It's right here:
http://sdrv.ms/Xya8gA
Big thanks go out to javum from forum.china-iphone.ru!
hello, I'm Italian, sorry for my bad english ...
I have a tinij i9220 (rooted) and I would like to load the recovery, I downloaded your TWRP, which contains the file recovery.img. To load it on my tinij, I use a tool that I found in the market: mobileuncle Tools, in the menu of the application, there is a function to overwrite the stock recovery: Recovery Update. In this way it would be easier than using SP FLASH TOOL.
you think it's dangerous? I DO NOT HAVE THE BACKUP of my phone.
thanks for everything.
Massimo
SP Flash Tool
maxim2000spa said:
hello, I'm Italian, sorry for my bad english ...
I have a tinij i9220 (rooted) and I would like to load the recovery, I downloaded your TWRP, which contains the file recovery.img. To load it on my tinij, I use a tool that I found in the market: mobileuncle Tools, in the menu of the application, there is a function to overwrite the stock recovery: Recovery Update. In this way it would be easier than using SP FLASH TOOL.
you think it's dangerous? I DO NOT HAVE THE BACKUP of my phone.
thanks for everything.
Massimo
Click to expand...
Click to collapse
Hey Massimo,
I'm German sorry for my bad Italian...and for your prime minister too, hehe...
I just don't know about mobileuncle - the screenshots were all Chinese, I never downloaded it.
Became addicted to SP Flash Tools - you might notice my signature
First thing I did I backed up my phone - did not work for the recovery which I don't need anymore anyway but worked fine for the system.img and boot.img.
Have bricked my phone since then a hundred times and SP always made my day saving me in the end.
I think it's dangerous to not have a backup. But not for you as have have *my* backup (of system.img + boot.img) which you might download at any time.
I never wrote what happened after installing TWRP - I like it very much, and it's easier than Clockworkmod and it has touch screen functionality and I knew it from my ZTE Skate before but - believe it or not it does not work with the fact that the Tinji has an internal SD card.
I mean maybe I just did not find the option, but I backuped (on the internal SD card) and then was unable to restore for TWRP couldn't find the internal SD much different than Clockworkmod.
So I reflashed Clockworkmod and keep sticking to it ever since.
Have fun,
Alessandro
thanks for the quick reply, so you advise me to use SP FLASH TOOL and CWM, right? To do my first backup I first load the CWM, I do not think there is a way to backup without CWM ...
See you soon
maxim2000spa said:
thanks for the quick reply, so you advise me to use SP FLASH TOOL and CWM, right? To do my first backup I first load the CWM, I do not think there is a way to backup without CWM ...
See you soon
Click to expand...
Click to collapse
Well, how would you get the CWM on the phone if not with SP Flash Tool?
By just downloading the ROM Manager from Google Play - that was my idea, did not work
Me, I recommend SP, but that's strictly personal.
Whenever you flashed the CWM recovery, you can happily start backuping!
Alex
Hi Alex, I tried to download your Flash SP Toll unsuccessful, you can check your skydrive? Thank you and good evening.
Massi
SP Flash Tool
maxim2000spa said:
Hi Alex, I tried to download your Flash SP Toll unsuccessful, you can check your skydrive? Thank you and good evening.
Massi
Click to expand...
Click to collapse
Hey Massimo,
I'll re-pack it and send it to you by private message.
If not, you can find it on the net - I downloaded it from www.chinamobiles.org which is 1.) German and where 2.) you have to be a member.
Alex
---------- Post added at 09:46 PM ---------- Previous post was at 09:29 PM ----------
maxim2000spa said:
Hi Alex, I tried to download your Flash SP Toll unsuccessful, you can check your skydrive? Thank you and good evening.
Massi
Click to expand...
Click to collapse
Hmm, either I'm totally dumb or one can just not send attachement with private messages!
Anyway, here it is.
[There's an 11,81 MB maximum for *.zip uploads. This will never work. What a mess]
Alex
you can send to my account : [email protected]
Thanks
maxim2000spa said:
you can send to my account : [email protected]
Thanks
Click to expand...
Click to collapse
Just to let everyone know, I did.
And I sold my Tinji, from now on all is written from memory.
Alex
Sent from my e1911_v77_gq2000_a41_6628_v20 using xda app-developers app
My Moto E Hangs when I try to boot a TWRP image
Attempted procedure:
(After booting into stock fastboot)
Code:
fastboot boot twrp-2.7.1.0-condor.img
A reboot to that TWRP was expected instead. But it freezes on bootloader.
TWRP used on the attempt:
dl.twrp.me/condor/twrp-2.7.1.0-condor.img.html
I don't want to flash a different recovery or anything else, just a clean root.
Moto E XT1025 DTV Dual BR
4.4.4
21.12.40.condor_retbr_tv_ds.retvr.en.BR.retbr
LucasBS1 said:
My Moto E Hangs when I try to boot a TWRP image
Attempted procedure:
(After booting into stock fastboot)
Code:
fastboot boot twrp-2.7.1.0-condor.img
A reboot to that TWRP was expected instead. But it freezes on bootloader.
TWRP used on the attempt:
dl.twrp.me/condor/twrp-2.7.1.0-condor.img.html
I don't want to flash a different recovery or anything else, just a clean root.
Moto E XT1025 DTV Dual BR
4.4.4
21.12.40.condor_retbr_tv_ds.retvr.en.BR.retbr
Click to expand...
Click to collapse
Sometimes booting recovery doesn't work...You will have to flash it. Perhaps you can flash the stock recovery after successful root? though i am not sure that will work
Also try booting into CWM
Tried the same method with CWM.img
Same result: fastboot frozen (volume buttons not responsive, and PC no longer sends commands)
To flash the stock recovery I would need to back it up first
But guess what's needed to backup ?
Yes, a temporary flashed bootloader with ZIP support
Would you know someone, who knows someone, who knows an master from MTI or Hogwarts or Narnia that knows an alternative ?
I would flash a mod right away if I could backup the original first...
(Unless, as I don't know exactly how this works, the ROM might come with the bootloader (?) Because the stock ROM I can download easily anywhere (already did))
LucasBS1 said:
Tried the same method with CWM.img
Same result: fastboot frozen (volume buttons not responsive, and PC no longer sends commands)
To flash the stock recovery I would need to back it up first
But guess what's needed to backup ?
Yes, a temporary flashed bootloader with ZIP support
Would you know someone, who knows someone, who knows an master from MTI or Hogwarts or Narnia that knows an alternative ?
I would flash a mod right away if I could backup the original first...
(Unless, as I don't know exactly how this works, the ROM might come with the bootloader (?) Because the stock ROM I can download easily anywhere (already did))
Click to expand...
Click to collapse
Hi,
Did you managed it to work? I have exactly the same problem. If I even flash twrp or cwm I still can't boot into it, there is only "no command" message.
I can't get any help anywhere, it makes me crazy. Do you have any custom recovery that worked for you after flashing?? I'm even starting to think that my device is broken somehow.
giaur said:
Hi,
Did you managed it to work? I have exactly the same problem. If I even flash twrp or cwm I still can't boot into it, there is only "no command" message.
I can't get any help anywhere, it makes me crazy. Do you have any custom recovery that worked for you after flashing?? I'm even starting to think that my device is broken somehow.
Click to expand...
Click to collapse
I did NOT flash the recovery yet
I'm trying to run the recovery without flashing it, to avoid problems like yours
You said you flashed both CWM and TWRP ?
And Neither one of them worked ?
I'm screwed too, then...
:crying:
See if you can find the stock recovery somewhere
And NOT here
This forum is not good for it
It's too much phone specific... too narrow... and we get no attention; specially with our "not-mainstream" phone
Generic instruction could work
If you take any action, or find any forum you find helpful, let me know
@giaur @LucasBS1
I too have tried booting the recovery ,but it doesn't work. You will have to flash it
if you are seeing 'no command' message it means that you still have stock recovery and the custom recovery wasn't flashed successfully.
try this one http://forum.xda-developers.com/mot...recovery-twrp-2-8-2-0-touch-recovery-t2971601
or this one http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3100879
LucasBS1 said:
I did NOT flash the recovery yet
I'm trying to run the recovery without flashing it, to avoid problems like yours
You said you flashed both CWM and TWRP ?
And Neither one of them worked ?
I'm screwed too, then...
:crying:
See if you can find the stock recovery somewhere
And NOT here
This forum is not good for it
It's too much phone specific... too narrow... and we get no attention; specially with our "not-mainstream" phone
Generic instruction could work
If you take any action, or find any forum you find helpful, let me know
Click to expand...
Click to collapse
None of them worked. I'm going to resign, because there is nothing I can do. Seems you have exactly the same problem as me. What I tried:
- fastboot boot recovery.img. Phone hangs on bootlogo
- flash recovery, then use go to recovery option in fastboot menu. In this case, 2 possibilities: with usb cable connected, it boots normally to system, not to recovery. With usb cable disconnected, screen goes black and phone looks like powered off. You will need to power it on and it will boot to system.
- On running system with usb debugging enabled. If you type "adb reboot recovery", you will end with dead robot and "no command" error. You can however press VolUP +Power on this screen and you will see Android 3e recovery.
If you have the same problem as me, you are completly lost and it's impossible to intall recovery on your device. I'm close to resign and say "**** this ****ty phone" because (as you already mentioned), there is no any attention on my questions, twrp support was dropped long time ago etc.
Flashing recovery should not wipe your data, so once you try to flash twrp or cwm, please let me know about your results. I'm sure I will never able to solve this problem, but I will feel better knowing that I'm not alone whit it
---------- Post added at 06:05 PM ---------- Previous post was at 06:00 PM ----------
mepsilon2 said:
@giaur @LucasBS1
I too have tried booting the recovery ,but it doesn't work. You will have to flash it
if you are seeing 'no command' message it means that you still have stock recovery and the custom recovery wasn't flashed successfully.
try this one http://forum.xda-developers.com/mot...recovery-twrp-2-8-2-0-touch-recovery-t2971601
or this one http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3100879
Click to expand...
Click to collapse
Still the same, I'm on stock recovery. In console, no errors:
Code:
[email protected]:~/android/DO_MOTOROLI/twrp/2.8.5$ fastboot flash recovery twrp2.8.5.0-recovery.img
target reported max download size of 299892736 bytes
sending 'recovery' (9046 KB)...
OKAY [ 0.312s]
writing 'recovery'...
OKAY [ 0.860s]
finished. total time: 1.172s
But "adb reboot recovery" - "No command". Damn it...
---------- Post added at 06:26 PM ---------- Previous post was at 06:05 PM ----------
Ok, I'm finished. It's not possible. F U C K Motorola and good night. My advice: don't waste your time if you have the same problem. You will get nothing, except wasted time. It's good that it's not my phone (I own OnePlus One). But I was asked to install CM12.1 on my friend's phone. It's impossible, so I will need to tell him I was failed with that.
mepsilon2 said:
@giaur @LucasBS1
I too have tried booting the recovery ,but it doesn't work. You will have to flash it
if you are seeing 'no command' message it means that you still have stock recovery and the custom recovery wasn't flashed successfully.
try this one http://forum.xda-developers.com/mot...recovery-twrp-2-8-2-0-touch-recovery-t2971601
or this one http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3100879
Click to expand...
Click to collapse
I see people complaining about bugs or not-working features on the first link
Are you sure it's safe ?
It's not the official TWRP (apparently)
When I google for this bootloader the official page shows version 2.7.1.0
Whereas on your second link they are on the 2.8.2.0
Which one should I trust ?
And to anyone who might answer:
Trough PC is the only/safest way to flash these recoveries ?
Seeing giaur on that situation puts me stepping back...
LucasBS1 said:
I see people complaining about bugs or not-working features on the first link
Are you sure it's safe ?
It's not the official TWRP (apparently)
When I google for this bootloader the official page shows version 2.7.1.0
Whereas on your second link they are on the 2.8.2.0
Which one should I trust ?
And to anyone who might answer:
Trough PC is the only/safest way to flash these recoveries ?
Click to expand...
Click to collapse
I tested both: latest official 2.7 and linked 2.8. So they are safe. Official support for Moto E was dropped long time ago.
giaur said:
I tested both: latest official 2.7 and linked 2.8. So they are safe. Official support for Moto E was dropped long time ago.
Click to expand...
Click to collapse
Cool
Regarding to safety
Should I flash CWM or TWRP ? Why ?
Regarding the method
Flash through usb->Fastboot or through Apk (like CWM)
Or a third method ?
And why
Between TWRP 2.7 and 2.8, which one is safer ?
And of course...why ?
And a last question, before I leave you guys alone:
Did you manage to root the phone, despite the poblems occurring to you, giaur ?
Once you succesfuly flash twrp, you need to flash supersu then and you are rooted. If you don't have your current system rooted, the only way to flash custom recovery is to flash via fastboot. TWRP is recommended, because it's way better
I can't say anything more, because my moto e is not flashable, so I can't replace stock recovery.
Yo !
Flashed TWRP
But wiped things I shouldnt
How to put the ROM back via USB ?
EDIT:
NEVERMIND
Found how to use SD to do that
giaur said:
Once you succesfuly flash twrp, you need to flash supersu then and you are rooted. If you don't have your current system rooted, the only way to flash custom recovery is to flash via fastboot. TWRP is recommended, because it's way better
I can't say anything more, because my moto e is not flashable, so I can't replace stock recovery.
Click to expand...
Click to collapse
I was also struggling a lot many days into getting twrp and cw loaded on to a Moto E. The problem was that I was pressing the Power button to activate the recovery menu and that will not activate the recovery option. You got to press the UP button instead of power after executing
Code:
fastboot.exe flash recovery twrp-2.8.1.0-condor.img
. This is quite counter intuitive but described well in most posts, but as experts we assume up button is to go up the menu.
Sunish Issac
Since there is no way to root this phone using known root apps or MTK Droid Tools (which won't even make proper scatter file) is there at least some CWM / TWRP available? MTK DT says there is a way to root this phone from CWM but I have no idea where to look for it. I found something for Doogee x5 which has MT6580 (without M) but I'm afraid of doing it, I'm not sure how much different MT6580 and MT6580M are
keminekoo said:
Since there is no way to root this phone using known root apps or MTK Droid Tools (which won't even make proper scatter file) is there at least some CWM / TWRP available? MTK DT says there is a way to root this phone from CWM but I have no idea where to look for it. I found something for Doogee x5 which has MT6580 (without M) but I'm afraid of doing it, I'm not sure how much different MT6580 and MT6580M are
Click to expand...
Click to collapse
Root it with the KingRoot app. Don't forget that you must turn USB Debugging on BEFORE you attempt to root it. Once it is rooted, leave USB Debugging on. Also, you should then install Busy Box X from the Play Store. Run Busy Box X and elect to install the busybox.
Then install Flashify from the Play Store. Flashify will not work properly unless you completed the installation of busybox in the system. With Flashify, you can back up the stock boot image (also referred to as the kernel image) and the stock recovery image. Save a copy of the back up files on your computer for safekeeping.
Then go back to MTK Droid Tools (make sure USB Debugginh is still on). Now select the Root, Backup, Recovery tab. Then click on the big button that says "Recovery and Boot." This will make the custom recovery for you. During the process, you will be asked to select the boot image file. Just point to the backup you made of the BOOT image from Flashify.
When the MTK Droid is done its thing, you will now have a CWM recovery for your phone. You will find it in the subfolder called "recovery" under the MTK Droid Tools folder. You will also find a "boot patched" image. You can now flash the new CWM recovery image and the new boot image to your phone by copying those files to your SD card and using Flashify to flash the images. Be careful! Do not make a silly error such as flashing the recovery image to the boot partition or you will soft-brick your phone. Flash recovery image to recovery and boot image to boot.
Don't forget to thank me by clicking the Thanks button if I have helped you. And feel free to follow up with any questions.
I'd like this to be so easy but any root app either PC or android version is failing to root this phone. Only SRSROOT is showing that phone is rooted successful but of course it's not true. I checked with Root checker and it says that root it's not properly installed and SU won't install since there is no root at all.
Also MTK Droid Tools won't detect my chipset in 100%. Won't let me root it there or show those tabs you mentioned. Someone somewhere said that MT6580 isn't fully supported yet and I guess it's true. I can modify config files so program will detect my phone that's why I could use option to make scatter file (which wasn't right one anyway).
Guess I will have to wait little longer to finally get root and recovery for this phone. But it's kinda strange that there is no way to actually root MT6580M but DOOGEE x5 with MT6580 has cwm and root already. I was thinking of using this DOOGEE things to root my phone but at the end I passed. Not worth bricking my only phone.
No way to root lenny2 with KingoRoot...
I´m looking forward to use my Lenny 2 with CM or MIUI... but i think.... it´s only a dream...
Echse27 said:
No way to root lenny2 with KingoRoot...
I´m looking forward to use my Lenny 2 with CM or MIUI... but i think.... it´s only a dream...
Click to expand...
Click to collapse
Use the KINGROOT app. Read what is written CAREFULLY. It is not the kingOroot app. These are two completely different root apps. KingRoot will root you Wiko Lenny 2. KingoRoot will NOT. So, no, you don't have to keep dreaming. Just do it!
Sent from my Nexus 7 using XDA Free mobile app
Thank´s CVAngelo....
You´re right... i only tested the KingoRoot... Now i have tested the KingRoot App too, but also without success...
USB debugging is on but at this time there is no progress to root the lenny2... KingRoot says...
Also the PC-Variant is not successfull...
Firmware Flash Tool https://mega.nz/#!IVNiVRqC!Q4hNfgIqzeCxw3Hopy_jS7zovL1oGtop3Ip2pmpWgDI
Echse27 said:
Thank´s CVAngelo....
You´re right... i only tested the KingoRoot... Now i have tested the KingRoot App too, but also without success...
USB debugging is on but at this time there is no progress to root the lenny2... KingRoot says...
Also the PC-Variant is not successfull...
Click to expand...
Click to collapse
Sorry to hear that. In that case, you may have to do it the hard way.
Use MTK Droid to extract the scatter.txt file (assuming it can get a clear, meaningful scatter). Then use SP Flash Tool to read back a full ROM dump of the phone. Process the ROM dump with MTK Droid. During that process you can create the CWM for the phone. If you have the CWM recovery image, then flash it back to the phone using SPF. Finally, boot into recovery and flash the SuperSu v2.46 zip from your SD card and it should be fully rooted.
This whole process will take the major part of 2 hours. The key is getting the scatter.txt and CWM for the phone. If you are able to do it, post those two files so others can benefit.
Of course, all of this depends on whether the MTK 6580 chipset is compatible with MTK Droid and with SP Flash.
Anyone wanna volunteer check whether the phone works with MTK Droid and SP Flash...then giving the process a go if the compatibility checks out? There's always the risk of bricking the phone at the point you flash the custom recovery or when you install SuperSu from the zip. But you can easily revive it with the firmware backup you make with SP Flash.
Sent from my Nexus 7 using XDA Free mobile app
---------- Post added at 10:46 AM ---------- Previous post was at 10:37 AM ----------
hanuma said:
TWRP Recovery LENNY2 http://d-h.st/4xqq
Install using Flash Tool
Firmware Flash Tool https://mega.nz/#!IVNiVRqC!Q4hNfgIqzeCxw3Hopy_jS7zovL1oGtop3Ip2pmpWgDI
Click to expand...
Click to collapse
Well here it is folks...Hanuma has posted the TWRP for the phone! So no need to root the phone the hard way as indicated in my last post. Also, perhaps SP Flash is compatible with the phone (there is firmware and a flash tool provided in a link by Hanuma...not sure if that's SP Flash or some other flash tool). @hanuma...can you provide some clarity here?
So the EASY way to get root is to flash the TWRP recovery to the phone (you'll need the scatter.txt file to use with SP Flash...or use the flash tool cited by Hanuma). Once you flash this custom recovery, download the SuperSu v2.46 to your SD card, and install it from the SD. You should be fully and properly rooted after that.
Remember to first make a BACKUP of your ROM with the flash tool before anything else. This way, you can recover if you make a mistake.
Could someone please post the scatter.txt for the Lenny 2? And confirm whether the flash tool in that link is SP Flash. Good luck.
Sent from my Nexus 7 using XDA Free mobile app
I will give it a try...
I will report later...
hanuma said:
TWRP Recovery LENNY2 http://d-h.st/4xqq
Install using Flash Tool
Firmware Flash Tool https://mega.nz/#!IVNiVRqC!Q4hNfgIqzeCxw3Hopy_jS7zovL1oGtop3Ip2pmpWgDI
Click to expand...
Click to collapse
The second link is only a ROM-Build... i can´t find a flashtool or something looks like a tool... there are only *.img files for recovery, system, etc.... (screenshot attached!!!)
Where i can find a flash tool?
SP Flash Tool http://www.needrom.com/download/sp-flash-tool-v5-1424-00/
Drivers http://www.needrom.com/download/mtk-driver-auto-installer-v5-1453-03/
I flashed the recovery succsessfully first time but the touchscreen was without function... so i flashed the recovery a second time but the touch screen don´t react, too ... now i tested it the third time with the same result...
i can´t "swipe to allow the modification" of the TWRP... So the recovery is not permanent and i can´t flash the SuperSU.zip...
Echse27 said:
I flashed the recovery succsessfully first time but the touchscreen was without function... so i flashed the recovery a second time but the touch screen don´t react, too ... now i tested it the third time with the same result...
i can´t "swipe to allow the modification" of the TWRP... So the recovery is not permanent and i can´t flash the SuperSU.zip...
Click to expand...
Click to collapse
Do the volume buttons, home key, back button all not work?
Sent from my Nexus 7 using XDA Free mobile app
CVAngelo said:
Do the volume buttons, home key, back button all not work?
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
The only thing i can do is longpressing the powerbutton to shutdown the device... but no other things are working, no touch on screen, no buttons... nothing...
Echse27 said:
The only thing i can do is longpressing the powerbutton to shutdown the device... but no other things are working, no touch on screen, no buttons... nothing...
Click to expand...
Click to collapse
Not good! Why is nothing as easy as it should be? That's one reason I hate touch recoveries.
Well since you have all the stock firmware files for the phone, it should now be a trivial task to create your own CWM recovery. Just fire up MTK Droid Tools and connect your phone to the computer via USB cable (make sure USB Debugging is on).
When MTK sees your phone, simply click on the Root, Backup, Recovery tab and the big button (called Recovery and Boot) and MTK Droid will make the CWM recovery image for you. Make sure the little radio button marked "To choose the boot.img file" is checked. During the process, it will ask you to select the boot.img from that firmware folder. It needs that kernel to create the perfect custom recovery for your phone.
Then flash only the new CWM recovery to the phone using the SP Flash Tool, just as you did with the TWRP recovery. Once you've got CWM on there, you can flash the SuperSu zip (this CWM recovery uses only the buttons).
Please post the CWM recovery image, the stock recovery and the scatter.txt file after you've confirmed that it works. That way others on the thread can flash the CWM and root their phones without having to download the huge set of firmware files.
Sent from my Nexus 7 using XDA Free mobile app
Thank´s CVAngelo...
i will give it a try later... because my working machine blocks the .exe file with it´s virusdefinition...
So i have to use my virtual machine at home... nomally i only use ubuntu or debian...
So, i will give a report...
CWM Recovery https://mega.nz/#!JYEDgCKA!K_4WBt_1CQ6Wf21bdCTrmG4fxlFT-6gxVybc3_cQYfk
hanuma said:
CWM Recovery(Test) http://d-h.st/rBJv
Click to expand...
Click to collapse
I will test this one tomorror... Thank you hanuma...
Gesendet von meinem LENNY2 mit Tapatalk
Flashing the CWM file works problemless...
CWM and navigation with buttons works great too........but...... i have flashed the SuperSU_2.46 successfully.... after that the phone stucks on Bootlogo "LENNY2"... (i wait around 20min)
Nothing works after that, so i decides that it´s a goog idea to flash the hole rom V14 ... the device need a loog time to boot (ca. 15min) and now i have to rebuild my settings and apps... but thats ok...
Greetz
Echse
Echse27 said:
Flashing the CWM file works problemless...
CWM and navigation with buttons works great too........but...... i have flashed the SuperSU_2.46 successfully.... after that the phone stucks on Bootlogo "LENNY2"... (i wait around 20min)
Nothing works after that, so i decides that it´s a goog idea to flash the hole rom V14 ... the device need a loog time to boot (ca. 15min) and now i have to rebuild my settings and apps... but thats ok...
Greetz
Echse
Click to expand...
Click to collapse
That's great progress. At least you're back up and running! Good for you. After you're done rebuilding settings and so on, flash the SuperSu zip again. Then let us know if you're rooted.
Sent from my Nexus 7 using XDA Free mobile app
Hi guys,
anyone know how to root this phone?
root on Cubot Cheetah 2
https://forum.xda-developers.com/ge...bot-cheetah2-information-reviews-5-5-t3509666
I flashed TWRP, attachted as rar file. I did it like this:
http://forum.xda-developers.com/android/general/guide-clones-t3421539
Did you know that devices has build in recovery menu?!
It can only backup some user data for you
You can get into by pressing POWER and Volume+ for a few sec. while turned of tile boot.
Hold Volume + and press Power again.
***Do not press Volume down, it is "enter" in first recovery screen you maybe start fastboot or normal
***Volume + is for navigate in first recovery screen
Do not flash other super user as in thread... i did and had a heavy bootloop (;
hello
i cooked my 1st rom for a Cubot like this https://forum.xda-developers.com/showthread.php?t=1801690.
Then i flashed it with the recovery. As installation stoped i got a message: "no os installed do you realy like to reboot?!"
So i cancel process to restore systemfiles which i backed up befor. *
But now all system app are gone and recover them with Titanium backup doesn´t work well. I also got those files from stock image and maybe most by another backup by root explorer. What to do right now?
Try to install my rom again? Via fastboot? Or flashing a clean stockrom i don´t know.
I´m uploading Cheetah 2 rom i cooked since hours, it is ~2gb
Maybe someone can look into it
My pc is to slow to run a emulator to test it. That´s why i try flashing befor posting download link dang
stock rom:
CUBOT_6143C_CHEETAH_2_V02_20161027.zip https://mega.nz/#!VUc1TIjK!0FK1U5bt0NIL8RNEt-LkV-U5byVBroqV0PU92VzM5iE
http://forum.cubot.net/viewtopic.php?f=21&t=1176
other:
http://forum.cubot.net/viewforum.php?f=21
*did i just miss to wipe data .. i need some sleep ^o^
url to my rom
(part 1 /3) http://www.mediafire.com/file/0rwbkc84afgqd38/Cubot+Cheetah+2+6143c+V02+20161027+xda.7z.003
(part 2&3) soon here ~3hours+
HAPPY NEW YEAR
Do not install wip-rom.
This on your own risk:
https://www.mediafire.com/folder/5k0832h9u1cce/Cubot_Cheetah_2
Ok, after new installation and wipe partition my phone still alive
But all system app are missing! And no superuser!
toBsucht Psp said:
I flashed TWRP, attachted as rar file. I did it like this:
http://forum.xda-developers.com/android/general/guide-clones-t3421539
Did you know that devices has build in recovery menu?!
It can only backup some user data for you
You can get into by pressing POWER and Volume+ for a few sec. while turned of tile boot.
***Do not press Volume down, it is "enter" in first recovery screen you maybe start fastboot or normal
***Volume + is for navigate in first recovery screen
Do not flash other super user as in thread... i did and had a heavy bootloop (;
Click to expand...
Click to collapse
Thanks, but it didn't work for me...
Any other?
Do you use same firmware as me? That very importat!
What doesn´t work for you?
Are you in develop mode, enable debugging or connected as android bridge?
I flashed today TWRP to another Cheetah 2! But this super user installation blow my mind and device!!! Installed chainfire (2.52) as in linked thread made my phone hang on cubot bootlogo. Then i downloaded SR2-SuperSU-v2.79-SR2-20170103215521.zip and i pass the boot but now all system apps are gone again! Recovered it with my TWRP backup.
Thinking about retry 2.72 SuperSu which maybe was reason of bootloop on 1st cubot rooting :fingers-crossed:
Keep in mind to backup your whole system if you enter TWRP 1st time, befor installing SuperSu. Suggesting befor install TWRP make backup with stock recovery!
Maybe a video i made on that 2nd rooting procedure is helpful to you?
https://youtu.be/wqXhLF_WOKI
unlock bootloader
https://youtu.be/4dtMelJsGx0
I have cubot cheetah (1st edition). I Installed twrp, but it doesn't work. Touch doesn't work. Everything you posted, it's for 2nd edition.
Sent from cubot cheetah
I´m pretty sure boot into recovery is same as on Cheetah 2. I also believe you still not unlocked bootloader!
I Installed twrp, but it doesn't work. a) you did not Touch doesn't work. b) bootloader and stock recovery navigation via hardwarebutton TWRP via Touch
Click to expand...
Click to collapse
Do a websearch: "unlock bootloader adb" example
It is basicly same step as in ultimate MT6753 thread url = see me 1st reply
You just need fastboot.exe and your Cheetah running as adb device to install TWRP.
Make sure you got it installed Cheetah via ADB driver not as MTP device or else!
TWRP is same on cheetah 1 & 2 not 100% sure, maybe ask megathebest .
Alternative method:
adb.exe to unlock and
Sp flashtool with vCOM-driver installed
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
https://androidmtk.com/install-android-cdc-driver-manually
Some links for you but you don´t need those files at the moment:
Cubot Cheetah 1 ROM Download - PC Flash Files http://forum.cubot.net/viewtopic.php?f=21&t=1146
Cubot Cheetah 1 ROM Download - T Card Flash Files 2 http://forum.cubot.net/viewtopic.php?f=21&t=1025
http://www.needrom.com/category/cubot/cheetah-cubot/
--------------------------------------------------------------------------------------------------------------------------
Another method to install TWRP is via update.zip but if you have to unlock oem via adb (minimal adb fastboot.exe) why manuel flash it.
How:
Rename twrp.zip to XXX-stock-rom name-XXX.zip place it at you internal memory boot into fastboot by power and volume button.
Ya, there are loads of tutorial on the internet about TWRP 3.1.1 For Cheetah 2 which means root is possible for the device running the latest Android OS.
Here is a guide which has shared the latest TWRP 3.1.1 with rooting guide
tiringer said:
I have cubot cheetah (1st edition). I Installed twrp, but it doesn't work. Touch doesn't work. Everything you posted, it's for 2nd edition.
Sent from cubot cheetah
Click to expand...
Click to collapse
i had the same problem but was very easy coming out. just connect the otg cable to your phone since the handset supports otg functionality then use the pc mouse once you have rebooted into recovery mode. works swiftly!!!!
Hi! I was trying to root Nokia 1
I flash TWRP through fastboot and it worked! But the problem was I was unable to see my files there.I think because of encryption..
So, I accidentally factory reset my phone through TWRP and then, I was unable to boot into system again..
I was stuck in TWRP
So, I go to fastboot and flash stock_recovery.IMG and after that when I reboot. I am seeing a black screen. I can feel vibration when press home key or home + volume up/down. but screen is black
Please help...
abdul_manan said:
Hi! I was trying to root Nokia 1
I flash TWRP through fastboot and it worked! But the problem was I was unable to see my files there.I think because of encryption..
So, I accidentally factory reset my phone through TWRP and then, I was unable to boot into system again..
I was stuck in TWRP
So, I go to fastboot and flash stock_recovery.IMG and after that when I reboot. I am seeing a black screen. I can feel vibration when press home key or home + volume up/down. but screen is black
Please help...
Click to expand...
Click to collapse
Use micro SD card for twrp. You can't remove encryption just by factory reset. I know how to remove encryption on Nougat but that method doesn't work on Oreo. When you flashed TWRP flash SuperSU (not Magisk) then boot to system, after that boot to twrp recovery again and wipe factory reset and wipe internal storage. You have removed encryption. SuperSU needs to be updated to patch plat and non play file contexts to remove encryption on Oreo. Or someone can make flashable zip to remove encryption.
First find nb0 file for Nokia 1 and try to flash rom with OST.
SkaboXD said:
Use micro SD card for twrp. You can't remove encryption just by factory reset. I know how to remove encryption on Nougat but that method doesn't work on Oreo. When you flashed TWRP flash SuperSU (not Magisk) then boot to system, after that boot to twrp recovery again and wipe factory reset and wipe internal storage. You have removed encryption. SuperSU needs to be updated to patch plat and non play file contexts to remove encryption on Oreo. Or someone can make flashable zip to remove encryption.
First find nb0 file for Nokia 1 and try to flash rom with OST.
Click to expand...
Click to collapse
Thanks for the reply!
Can you please tell me where can I find the nb0 file of Nokia 1 with Android 8.1 Oreo Go edition TA-1047?
abdul_manan said:
Thanks for the reply!
Can you please tell me where can I find the nb0 file of Nokia 1 with Android 8.1 Oreo Go edition TA-1047?
Click to expand...
Click to collapse
currently it's not available, you need to wait someone to upload it.
Nokia1 uses MTK CPU right? If you can get the ota zip of the current update on your phone, you can extract the boot.img file then boot into download mode and type fast boot flash boot <boot.img file>
redweaver said:
Nokia1 uses MTK CPU right? If you can get the ota zip of the current update on your phone, you can extract the boot.img file then boot into download mode and type fast boot flash boot <boot.img file>
Click to expand...
Click to collapse
Can you please explain a little bit more!
How to get ota zip file? (My phone is not working as mentioned above)
Where can I get boot.img?
How to extract and where boot.img?
How to boot into download mode?
abdul_manan said:
Hi! I was trying to root Nokia 1
I flash TWRP through fastboot and it worked! But the problem was I was unable to see my files there.I think because of encryption..
So, I accidentally factory reset my phone through TWRP and then, I was unable to boot into system again..
I was stuck in TWRP
So, I go to fastboot and flash stock_recovery.IMG and after that when I reboot. I am seeing a black screen. I can feel vibration when press home key or home + volume up/down. but screen is black
Please help...
Click to expand...
Click to collapse
I'm having a kind of similar issue. I flashed twrp and now its stuck in a twrp loop. It boots only in twrp and not system. What should I do?
Ludba Amb said:
Can you please explain a little bit more!
How to get ota zip file? (My phone is not working as mentioned above)
Where can I get boot.img?
How to extract and where boot.img?
How to boot into download mode?
Click to expand...
Click to collapse
http://www.mediafire.com/file/0xgn9o0b711wcw0/Nokia_1_TA-1047_MT6735_V8.1.0_180401.zip
Stock Rom for 1047
Download it.
Extract boot.img from that
boot into download mode/recovery
adb reboot recovery
answers to all your questions.... not the answer to fix your problem I think... But have a go.
And last but not least... Please use the search option first or google instead of asking all questions at once.
Or try to get familiar with rooting first...…
good luck buddy.
hello everyone i have nokia 1 oreo go edition i don't have any idea how to root
please help me by sending links for :
1 ) nokia 1 (ta-1047 ) TWRP
2 ) nokia 1 custom rom
3 ) nokia 1 current rom (for security)
(remenber thats only model ta-1047)
seriously i want to root it because there are many issues like multitouch screen problem or missing some system apps and also device getting hot because the memory (ram) is lagging (1gb ram is not enough to run android oreo correctly 2018 )
{PLEASE HELP}
help me please !
can you send me a twrp for nokia 1 ta-1047
i need to root my device to dowoad custom rom
MyTH30 said:
I'm having a kind of similar issue. I flashed twrp and now its stuck in a twrp loop. It boots only in twrp and not system. What should I do?
Click to expand...
Click to collapse
Same here. Seems that the decryption does not work. Better make sure your phone is not encrypted before messing with twrp (3.2.3).
Be careful
Some Nokia 1 are a TA 1060 variant number and if you flash the wrong file you are going to have further problems.
The process to root and get TWRP on the nokias Is complicated enough without everyone suggesting wrong model variants / numbers.
I guarantee someone will download the wrong file for the wrong model and come here crying.
is this the real firmware?
inkepinkje said:
http://www.mediafire.com/file/0xgn9o0b711wcw0/Nokia_1_TA-1047_MT6735_V8.1.0_180401.zip
Stock Rom for 1047
Download it.
Extract boot.img from that
boot into download mode/recovery
adb reboot recovery
answers to all your questions.... not the answer to fix your problem I think... But have a go.
And last but not least... Please use the search option first or google instead of asking all questions at once.
Or try to get familiar with rooting first...…
good luck buddy.
Click to expand...
Click to collapse
hi, i needed to know if this is the real one, they show it's mt6735 instead mt6737m, I've already downloaded a file with the similar name nd it has scatter file of mt6735, that's while in the sp flash tool,i don't see all of the partitions being detected to flash
Hey i am facing the same issue but i didn't flash any other recovery mode my phone Nokia 1 TA-1056 am getting black screen and only feel the vibration when i press power key and when i put my phone on charging then its shows the display and boot into recovery mode directly can anyone help me how i can overcome this issue